Full logs are available at http://arm-soc.lixom.net/bootlogs/next/next-20141001/
Failed boards:
arndale arm-exynos_defconfig : FAILED 2:20.03 arndale arm-multi_v7_defconfig : FAILED 2:19.89 arndale arm-multi_lpae_defconfig : FAILED 2:20.42 capri arm-bcm_defconfig : FAILED 1:44.35 capri arm-multi_v7_defconfig : FAILED 1:45.02 colombus arm-sunxi_defconfig : FAILED 1:49.46 colombus arm-multi_v7_defconfig : FAILED 1:55.44 colombus arm-multi_lpae_defconfig : FAILED 1:55.53 cubie arm-sunxi_defconfig : FAILED 1:46.97 cubie arm-multi_v7_defconfig : FAILED 1:43.51 cubie2 arm-sunxi_defconfig : FAILED 1:45.89 cubie2 arm-multi_v7_defconfig : FAILED 1:41.16 cubie2 arm-multi_lpae_defconfig : FAILED 1:41.02 odroidu3 arm-exynos_defconfig : FAILED 1:46.52 pi arm-exynos_defconfig : FAILED 1:51.84 pi arm-multi_v7_defconfig : FAILED 1:49.53 pi arm-multi_lpae_defconfig : FAILED 1:51.92 pit arm-exynos_defconfig : FAILED 1:49.88 pit arm-multi_v7_defconfig : FAILED 1:53.08 pit arm-multi_lpae_defconfig : FAILED 1:51.58 sama5 arm-sama5_defconfig : FAILED 1:47.26 snow arm-exynos_defconfig : FAILED 2:01.94 snow arm-multi_v7_defconfig : FAILED 2:00.40 snow arm-multi_lpae_defconfig : FAILED 1:58.23 trimslice arm-multi_v7_defconfig : FAILED 1:54.00
Successful boards:
apc arm-vt8500_v6_v7_defconfig : passed 1:16.75 bbb arm-omap2plus_defconfig : passed 1:32.91 bbb arm-multi_v7_defconfig : passed 1:16.40 beaver arm-tegra_defconfig : passed 1:04.47 beaver arm-multi_v7_defconfig : passed 0:51.16 cubox arm-multi_v7_defconfig : passed 1:05.04 dalmore arm-multi_v7_defconfig : passed 1:20.44 dalmore arm-multi_lpae_defconfig : passed 2:30.44 hummingboard arm-imx_v6_v7_defconfig : passed 1:30.66 hummingboard arm-multi_v7_defconfig : passed 1:10.33 jetsontk1 arm-tegra_defconfig : passed 1:01.06 jetsontk1 arm-multi_v7_defconfig : passed 1:09.03 jetsontk1 arm-multi_lpae_defconfig : passed 1:04.40 omap5uevm arm-omap2plus_defconfig : warnings 1:03.86 omap5uevm arm-multi_v7_defconfig : passed 1:03.99 omap5uevm arm-multi_lpae_defconfig : passed 1:11.09 pandaes arm-omap2plus_defconfig : warnings 1:29.38 pandaes arm-multi_v7_defconfig : passed 1:45.14 seaboard arm-tegra_defconfig : passed 1:07.10 seaboard arm-multi_v7_defconfig : passed 1:14.02 snowball arm-u8500_defconfig : passed 2:39.98 snowball arm-multi_v7_defconfig : passed 3:06.85 trimslice arm-tegra_defconfig : passed 1:05.45 wandboard arm-imx_v6_v7_defconfig : passed 1:12.34 wandboard arm-multi_v7_defconfig : passed 1:04.14
Offline boards:
dalmore arm-tegra_defconfig : OFFLINE 1:49.99
Board legend is available at http://arm-soc.lixom.net/boards.html
Last entries of failed logs below:
========================================================================
Board arndale-arm-exynos_defconfig failure log: -------------------------------------------------
[ 0.579564] s2mps11-clk s5m8767-clk: could not find clock sub-node [ 0.579584] s2mps11-clk: probe of s5m8767-clk failed with error -22 [ 0.582262] Advanced Linux Sound Architecture Driver Initialized. [ 0.583140] Switched to clocksource arch_sys_counter [ 0.593913] NET: Registered protocol family 2 [ 0.594465] TCP established hash table entries: 8192 (order: 3, 32768 bytes) [ 0.594543] TCP bind hash table entries: 8192 (order: 5, 163840 bytes) [ 0.594701] TCP: Hash tables configured (established 8192 bind 8192) [ 0.594747] TCP: reno registered [ 0.594760] UDP hash table entries: 512 (order: 2, 24576 bytes) [ 0.594799] UDP-Lite hash table entries: 512 (order: 2, 24576 bytes) [ 0.594987] NET: Registered protocol family 1 [ 0.596509] futex hash table entries: 512 (order: 3, 32768 bytes) [ 0.612120] romfs: ROMFS MTD (C) 2007 Red Hat, Inc. [ 0.612324] msgmni has been set to 1440 [ 0.612991] bounce: pool size: 64 pages [ 0.613006] io scheduler noop registered [ 0.613019] io scheduler deadline registered [ 0.613491] io scheduler cfq registered (default) [ 0.613756] exynos-dp-video-phy 10040720.video-phy: Failed to lookup PMU regmap [ 0.615280] 12100000.phy supply vbus not found, using dummy regulator [ 0.619903] dma-pl330 121a0000.pdma: Loaded driver for PL330 DMAC-2364208 [ 0.619917] dma-pl330 121a0000.pdma: DBUFF-32x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32 [ 0.623421] dma-pl330 121b0000.pdma: Loaded driver for PL330 DMAC-2364208 [ 0.623433] dma-pl330 121b0000.pdma: DBUFF-32x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32 [ 0.624455] dma-pl330 10800000.mdma: Loaded driver for PL330 DMAC-2364208 [ 0.624467] dma-pl330 10800000.mdma: DBUFF-64x8bytes Num_Chans-8 Num_Peri-1 Num_Events-32 [ 0.625447] dma-pl330 11c10000.mdma: Loaded driver for PL330 DMAC-2364208 [ 0.625459] dma-pl330 11c10000.mdma: DBUFF-64x8bytes Num_Chans-8 Num_Peri-1 Num_Events-32 [ 0.687775] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [ 0.689394] samsung-uart 12c00000.serial: ttySAC0 at MMIO 0x12c00000 (irq = 83, base_baud = 0) is a S3C6400/10 [ 0.689781] samsung-uart 12c10000.serial: ttySAC1 at MMIO 0x12c10000 (irq = 84, base_baud = 0) is a S3C6400/10 [ 0.690142] samsung-uart 12c20000.serial: ttySAC2 at MMIO 0x12c20000 (irq = 85, base_baud = 0) is a S3C6400/10 [ 2.266369] console [ttySA [PYBOOT] [arndale 02:17]: Timed out waiting for "<type 'str'>":
[PYBOOT] [arndale 02:18]: got exception: timeout ~$off
[PYBOOT] [arndale 02:19]: Done.
========================================================================
Board arndale-arm-multi_lpae_defconfig failure log: -------------------------------------------------
[ 0.096582] UDP hash table entries: 512 (order: 2, 16384 bytes) [ 0.096611] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) [ 0.096736] NET: Registered protocol family 1 [ 0.096942] RPC: Registered named UNIX socket transport module. [ 0.096949] RPC: Registered udp transport module. [ 0.096955] RPC: Registered tcp transport module. [ 0.096960] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.096974] PCI: CLS 0 bytes, default 64 [ 0.097478] hw perfevents: enabled with armv7_cortex_a15 PMU driver, 7 counters available [ 0.098554] futex hash table entries: 512 (order: 3, 32768 bytes) [ 0.107171] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.107734] NFS: Registering the id_resolver key type [ 0.107760] Key type id_resolver registered [ 0.107767] Key type id_legacy registered [ 0.107817] msgmni has been set to 1431 [ 0.108138] bounce: pool size: 64 pages [ 0.108335] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249) [ 0.108349] io scheduler noop registered [ 0.108360] io scheduler deadline registered [ 0.108514] io scheduler cfq registered (default) [ 0.108925] exynos-dp-video-phy 10040720.video-phy: Failed to lookup PMU regmap [ 0.116509] dma-pl330 121a0000.pdma: Loaded driver for PL330 DMAC-2364208 [ 0.116521] dma-pl330 121a0000.pdma: DBUFF-32x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32 [ 0.118690] dma-pl330 121b0000.pdma: Loaded driver for PL330 DMAC-2364208 [ 0.118701] dma-pl330 121b0000.pdma: DBUFF-32x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32 [ 0.119304] dma-pl330 10800000.mdma: Loaded driver for PL330 DMAC-2364208 [ 0.119315] dma-pl330 10800000.mdma: DBUFF-64x8bytes Num_Chans-8 Num_Peri-1 Num_Events-32 [ 0.119915] dma-pl330 11c10000.mdma: Loaded driver for PL330 DMAC-2364208 [ 0.119925] dma-pl330 11c10000.mdma: DBUFF-64x8bytes Num_Chans-8 Num_Peri-1 Num_Events-32 [ 0.165280] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [ 0.166662] samsung-uart 12c00000.serial: ttySAC0 at MMIO 0x12c00000 (irq = 83, base_baud = 0) is a S3C6400/10 [ 0.166939] samsung-uart 12c10000.serial: ttySAC1 at MMIO 0x12c10000 (irq = 84, base_baud = 0) is a S3C6400/10 [ 0.167213] samsung-uart 12c20000.serial: ttySAC2 at MMIO 0x12c20000 (irq = 85, base_baud = 0) is a S3C6400/10 [ 0.924595] console [ttyó [PYBOOT] [arndale 02:17]: Timed out waiting for "<type 'str'>":
[PYBOOT] [arndale 02:18]: got exception: timeout ~$off
[PYBOOT] [arndale 02:19]: Done.
========================================================================
Board arndale-arm-multi_v7_defconfig failure log: -------------------------------------------------
[ 0.096559] UDP hash table entries: 512 (order: 2, 16384 bytes) [ 0.096588] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) [ 0.096713] NET: Registered protocol family 1 [ 0.096917] RPC: Registered named UNIX socket transport module. [ 0.096925] RPC: Registered udp transport module. [ 0.096930] RPC: Registered tcp transport module. [ 0.096935] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.096949] PCI: CLS 0 bytes, default 64 [ 0.097450] hw perfevents: enabled with armv7_cortex_a15 PMU driver, 7 counters available [ 0.098529] futex hash table entries: 512 (order: 3, 32768 bytes) [ 0.107133] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.107695] NFS: Registering the id_resolver key type [ 0.107718] Key type id_resolver registered [ 0.107725] Key type id_legacy registered [ 0.107775] msgmni has been set to 1431 [ 0.108097] bounce: pool size: 64 pages [ 0.108291] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249) [ 0.108305] io scheduler noop registered [ 0.108316] io scheduler deadline registered [ 0.108468] io scheduler cfq registered (default) [ 0.108878] exynos-dp-video-phy 10040720.video-phy: Failed to lookup PMU regmap [ 0.116484] dma-pl330 121a0000.pdma: Loaded driver for PL330 DMAC-2364208 [ 0.116496] dma-pl330 121a0000.pdma: DBUFF-32x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32 [ 0.118667] dma-pl330 121b0000.pdma: Loaded driver for PL330 DMAC-2364208 [ 0.118677] dma-pl330 121b0000.pdma: DBUFF-32x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32 [ 0.119276] dma-pl330 10800000.mdma: Loaded driver for PL330 DMAC-2364208 [ 0.119287] dma-pl330 10800000.mdma: DBUFF-64x8bytes Num_Chans-8 Num_Peri-1 Num_Events-32 [ 0.119887] dma-pl330 11c10000.mdma: Loaded driver for PL330 DMAC-2364208 [ 0.119897] dma-pl330 11c10000.mdma: DBUFF-64x8bytes Num_Chans-8 Num_Peri-1 Num_Events-32 [ 0.165080] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [ 0.166457] samsung-uart 12c00000.serial: ttySAC0 at MMIO 0x12c00000 (irq = 83, base_baud = 0) is a S3C6400/10 [ 0.166735] samsung-uart 12c10000.serial: ttySAC1 at MMIO 0x12c10000 (irq = 84, base_baud = 0) is a S3C6400/10 [ 0.167009] samsung-uart 12c20000.serial: ttySAC2 at MMIO 0x12c20000 (irq = 85, base_baud = 0) is a S3C6400/10 [ 0.924391] console [tty [PYBOOT] [arndale 02:17]: Timed out waiting for "<type 'str'>":
[PYBOOT] [arndale 02:18]: got exception: timeout ~$off
[PYBOOT] [arndale 02:19]: Done.
========================================================================
Board capri-arm-bcm_defconfig failure log: -------------------------------------------------
[ 0.160000] SMP: Total of 2 processors activated. [ 0.160000] CPU: All CPU(s) started in SVC mode. [ 0.160000] devtmpfs: initialized [ 0.160000] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4 [ 0.160000] pinctrl core: initialized pinctrl subsystem [ 0.160000] regulator-dummy: no parameters [ 0.160000] NET: Registered protocol family 16 [ 0.170000] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.200000] cpuidle: using governor ladder [ 0.230000] cpuidle: using governor menu [ 0.230000] Kona Secure API initialized [ 0.230000] BCM-L2C-310 cache controller enabled, 16 ways, 512 kB [ 0.230000] BCM-L2C-310: CACHE_ID 0x410000c8, AUX_CTRL 0x1e050000 [ 0.260000] SCSI subsystem initialized [ 0.260000] NET: Registered protocol family 2 [ 0.260000] TCP established hash table entries: 8192 (order: 3, 32768 bytes) [ 0.260000] TCP bind hash table entries: 8192 (order: 4, 65536 bytes) [ 0.260000] TCP: Hash tables configured (established 8192 bind 8192) [ 0.260000] TCP: reno registered [ 0.260000] UDP hash table entries: 512 (order: 2, 16384 bytes) [ 0.260000] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) [ 0.260000] NET: Registered protocol family 1 [ 0.260000] futex hash table entries: 512 (order: 3, 32768 bytes) [ 0.270000] fuse init (API version 7.23) [ 0.270000] msgmni has been set to 1495 [ 0.270000] io scheduler noop registered [ 0.270000] io scheduler deadline registered [ 0.270000] io scheduler cfq registered (default) [ 0.270000] bcm-kona-gpio 35003000.gpio: Setting up Kona GPIO [ 0.270000] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.270000] console [ttyS0] disabled [ 0.270000] dw-apb-uart 3e000000.uart: ttyS0 at MMIO 0x3e000000 (irq = 99, base_baud = 808290) is a 16550A [ 0.640000] console [ttyS0] enabled
[PYBOOT] [capri 01:41]: Timed out waiting for "<type 'str'>":
[PYBOOT] [capri 01:42]: got exception: timeout ~$off
[PYBOOT] [capri 01:43]: Done.
========================================================================
Board capri-arm-multi_v7_defconfig failure log: -------------------------------------------------
[ 0.140000] NET: Registered protocol family 2 [ 0.140000] TCP established hash table entries: 8192 (order: 3, 32768 bytes) [ 0.140000] TCP bind hash table entries: 8192 (order: 4, 65536 bytes) [ 0.140000] TCP: Hash tables configured (established 8192 bind 8192) [ 0.140000] TCP: reno registered [ 0.140000] UDP hash table entries: 512 (order: 2, 16384 bytes) [ 0.140000] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) [ 0.140000] NET: Registered protocol family 1 [ 0.140000] RPC: Registered named UNIX socket transport module. [ 0.140000] RPC: Registered udp transport module. [ 0.140000] RPC: Registered tcp transport module. [ 0.140000] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.140000] futex hash table entries: 512 (order: 3, 32768 bytes) [ 0.145000] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.145000] NFS: Registering the id_resolver key type [ 0.145000] Key type id_resolver registered [ 0.145000] Key type id_legacy registered [ 0.145000] msgmni has been set to 1482 [ 0.145000] bounce: pool size: 64 pages [ 0.145000] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249) [ 0.145000] io scheduler noop registered [ 0.145000] io scheduler deadline registered [ 0.145000] io scheduler cfq registered (default) [ 0.150000] bcm-kona-gpio 35003000.gpio: Setting up Kona GPIO [ 0.185000] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [ 0.185000] console [ttyS0] disabled [ 0.185000] dw-apb-uart 3e000000.uart: ttyS0 at MMIO 0x3e000000 (irq = 99, base_baud = 808290) is a 16550A [ 0.760000] console [ttyS0] enabled [ 0.765000] Serial: IMX driver [ 0.765000] msm_serial: driver initialized [ 0.770000] STMicroelectronics ASC driver initialized [ 0.775000] serial: Freescale lpuart driver [ 0.775000] [drm] Initialized drm 1.1.0 20060810
[PYBOOT] [capri 01:42]: Timed out waiting for "<type 'str'>":
[PYBOOT] [capri 01:43]: got exception: timeout ~$off
[PYBOOT] [capri 01:44]: Done.
========================================================================
Board colombus-arm-multi_lpae_defconfig failure log: -------------------------------------------------
[ 1.210045] msm_serial: driver initialized [ 1.214624] STMicroelectronics ASC driver initialized [ 1.220371] serial: Freescale lpuart driver [ 1.224925] [drm] Initialized drm 1.1.0 20060810 [ 1.234579] loop: module loaded [ 1.243333] CAN device driver interface [ 1.247958] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.2.13-k [ 1.255265] igb: Copyright (c) 2007-2014 Intel Corporation. [ 1.262096] pegasus: v0.9.3 (2013/04/25), Pegasus/Pegasus II USB Ethernet driver [ 1.269835] usbcore: registered new interface driver pegasus [ 1.275779] usbcore: registered new interface driver asix [ 1.281425] usbcore: registered new interface driver ax88179_178a [ 1.287788] usbcore: registered new interface driver cdc_ether [ 1.293910] usbcore: registered new interface driver smsc75xx [ 1.299932] usbcore: registered new interface driver smsc95xx [ 1.305936] usbcore: registered new interface driver net1080 [ 1.311852] usbcore: registered new interface driver cdc_subset [ 1.318035] usbcore: registered new interface driver zaurus [ 1.323928] usbcore: registered new interface driver cdc_ncm [ 1.329839] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.336610] ehci-pci: EHCI PCI platform driver [ 1.341283] ehci-platform: EHCI generic platform driver [ 1.346885] platform 1c1b000.usb: Driver ehci-platform requests probe deferral [ 1.354455] ehci-omap: OMAP-EHCI Host Controller driver [ 1.359961] ehci-orion: EHCI orion driver [ 1.364200] SPEAr-ehci: EHCI SPEAr driver [ 1.368437] tegra-ehci: Tegra EHCI driver [ 1.372690] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.379145] ohci-pci: OHCI PCI platform driver [ 1.383812] ohci-platform: OHCI generic platform driver [ 1.389312] ohci-omap3: OHCI OMAP3 driver [ 1.393552] SPEAr-ohci: OHCI SPEAr driver [ 1.398310] usbcore: registered new interface driver usb-storage
[PYBOOT] [colombus 01:52]: Timed out waiting for "<type 'str'>":
[PYBOOT] [colombus 01:53]: got exception: timeout ~$off
[PYBOOT] [colombus 01:55]: Done.
========================================================================
Board colombus-arm-multi_v7_defconfig failure log: -------------------------------------------------
[ 0.301997] UDP hash table entries: 512 (order: 2, 16384 bytes) [ 0.302079] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) [ 0.302342] NET: Registered protocol family 1 [ 0.302637] RPC: Registered named UNIX socket transport module. [ 0.302647] RPC: Registered udp transport module. [ 0.302653] RPC: Registered tcp transport module. [ 0.302659] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.302680] PCI: CLS 0 bytes, default 64 [ 0.303391] hw perfevents: enabled with armv7_cortex_a7 PMU driver, 5 counters available [ 0.304866] futex hash table entries: 1024 (order: 4, 65536 bytes) [ 0.316403] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.317156] NFS: Registering the id_resolver key type [ 0.317231] Key type id_resolver registered [ 0.317238] Key type id_legacy registered [ 0.317307] msgmni has been set to 1462 [ 0.317690] bounce: pool size: 64 pages [ 0.317929] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249) [ 0.317948] io scheduler noop registered [ 0.317960] io scheduler deadline registered [ 0.318160] io scheduler cfq registered (default) [ 0.319394] platform 1c19400.phy: Driver sun4i-usb-phy requests probe deferral [ 0.322893] sun6i-a31-pinctrl 1c20800.pinctrl: initialized sunXi PIO driver [ 0.323083] sun6i-a31-r-pinctrl 1f02c00.pinctrl: Reset controller missing [ 0.323100] platform 1f02c00.pinctrl: Driver sun6i-a31-r-pinctrl requests probe deferral [ 0.378975] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [ 0.381447] console [ttyS0] disabled [ 0.402414] dw-apb-uart 1c28000.serial: ttyS0 at MMIO 0x1c28000 (irq = 32, base_baud = 1500000) is a U6_16550A [ 1.202604] console [ttyS0] enabled [ 1.206889] Serial: IMX driver [ 1.210369] msm_serial: driver initialized [ 1.214944] STMicroelectronics ASC driver initialized [ 1.220696] serial: Freescale lpuart driver [ 1.225238] [drm] Initialized drm 1.1.0 20060810
[PYBOOT] [colombus 01:52]: Timed out waiting for "<type 'str'>":
[PYBOOT] [colombus 01:53]: got exception: timeout ~$off
[PYBOOT] [colombus 01:55]: Done.
========================================================================
Board colombus-arm-sunxi_defconfig failure log: -------------------------------------------------
[ 0.313458] dummy_timer is not functional. [ 0.313461] dummy_timer is not functional. [ 0.313471] Could not switch to high resolution mode on CPU 0 [ 0.313474] Could not switch to high resolution mode on CPU 3 [ 0.313476] Could not switch to high resolution mode on CPU 1 [ 0.313504] dummy_timer is not functional. [ 0.313510] Could not switch to high resolution mode on CPU 2 [ 0.313602] RPC: Registered named UNIX socket transport module. [ 0.313610] RPC: Registered udp transport module. [ 0.313616] RPC: Registered tcp transport module. [ 0.313622] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.314137] hw perfevents: enabled with armv7_cortex_a7 PMU driver, 5 counters available [ 0.315313] futex hash table entries: 1024 (order: 4, 65536 bytes) [ 0.325118] NFS: Registering the id_resolver key type [ 0.325181] Key type id_resolver registered [ 0.325188] Key type id_legacy registered [ 0.325373] bounce: pool size: 64 pages [ 0.325589] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250) [ 0.325608] io scheduler noop registered [ 0.325619] io scheduler deadline registered [ 0.325792] io scheduler cfq registered (default) [ 0.328317] sun6i-a31-pinctrl 1c20800.pinctrl: initialized sunXi PIO driver [ 0.328505] sun6i-a31-r-pinctrl 1f02c00.pinctrl: Reset controller missing [ 0.328529] platform 1f02c00.pinctrl: Driver sun6i-a31-r-pinctrl requests probe deferral [ 0.381343] Serial: 8250/16550 driver, 8 ports, IRQ sharing disabled [ 0.384140] console [ttyS0] disabled [ 0.405045] dw-apb-uart 1c28000.serial: ttyS0 at MMIO 0x1c28000 (irq = 32, base_baud = 1500000) is a U6_16550A [ 1.075281] console [ttyS0] enabled [ 1.081219] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.087989] ehci-platform: EHCI generic platform driver [ 1.093578] ehci-platform 1c1b000.usb: EHCI Host Controller [ 1.099379] ehci-platform 1c1b000.usb: new USB bus registered, assigned bus number 1 [ 1.107560] ehci-platform 1c1b000.usb: irq 106, io mem 0x01c1b000
[PYBOOT] [colombus 01:46]: Timed out waiting for "<type 'str'>":
[PYBOOT] [colombus 01:47]: got exception: timeout ~$off
[PYBOOT] [colombus 01:48]: Done.
========================================================================
Board cubie-arm-multi_v7_defconfig failure log: -------------------------------------------------
[ 0.075964] UDP hash table entries: 512 (order: 2, 16384 bytes) [ 0.075992] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) [ 0.076161] NET: Registered protocol family 1 [ 0.076501] RPC: Registered named UNIX socket transport module. [ 0.076514] RPC: Registered udp transport module. [ 0.076519] RPC: Registered tcp transport module. [ 0.076525] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.078288] futex hash table entries: 256 (order: 2, 16384 bytes) [ 0.090530] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.091351] NFS: Registering the id_resolver key type [ 0.091400] Key type id_resolver registered [ 0.091407] Key type id_legacy registered [ 0.091472] msgmni has been set to 1479 [ 0.091928] bounce: pool size: 64 pages [ 0.092171] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249) [ 0.092190] io scheduler noop registered [ 0.092201] io scheduler deadline registered [ 0.092402] io scheduler cfq registered (default) [ 0.093342] platform 1c13400.phy: Driver sun4i-usb-phy requests probe deferral [ 0.096537] sun4i-pinctrl 1c20800.pinctrl: initialized sunXi PIO driver [ 0.155480] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [ 0.157816] console [ttyS0] disabled [ 0.177915] dw-apb-uart 1c28000.serial: ttyS0 at MMIO 0x1c28000 (irq = 29, base_baud = 1500000) is a U6_16550A [ 0.788206] console [ttyS0] enabled [ 0.792295] Serial: IMX driver [ 0.795730] msm_serial: driver initialized [ 0.800122] STMicroelectronics ASC driver initialized [ 0.805710] serial: Freescale lpuart driver [ 0.810052] [drm] Initialized drm 1.1.0 20060810 [ 0.819699] loop: module loaded [ 0.824222] platform 1c18000.sata: Driver ahci-sunxi requests probe deferral [ 0.833687] 1c0b080.mdio supply phy not found, using dummy regulator [ 0.840236] libphy: sun4i_mii_bus: probed
[PYBOOT] [cubie 01:40]: Timed out waiting for "<type 'str'>":
[PYBOOT] [cubie 01:41]: got exception: timeout ~$off
[PYBOOT] [cubie 01:43]: Done.
========================================================================
Board cubie-arm-sunxi_defconfig failure log: -------------------------------------------------
[ 0.058674] usbcore: registered new interface driver usbfs [ 0.058725] usbcore: registered new interface driver hub [ 0.058779] usbcore: registered new device driver usb [ 0.058915] pps_core: LinuxPPS API ver. 1 registered [ 0.058922] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti giometti@linux.it [ 0.058948] PTP clock support registered [ 0.059847] Switched to clocksource timer [ 0.069005] NET: Registered protocol family 2 [ 0.069523] TCP established hash table entries: 8192 (order: 3, 32768 bytes) [ 0.069599] TCP bind hash table entries: 8192 (order: 4, 65536 bytes) [ 0.069711] TCP: Hash tables configured (established 8192 bind 8192) [ 0.069795] TCP: reno registered [ 0.069806] UDP hash table entries: 512 (order: 2, 16384 bytes) [ 0.069886] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) [ 0.070055] NET: Registered protocol family 1 [ 0.070385] RPC: Registered named UNIX socket transport module. [ 0.070398] RPC: Registered udp transport module. [ 0.070404] RPC: Registered tcp transport module. [ 0.070410] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.071685] futex hash table entries: 256 (order: 2, 16384 bytes) [ 0.081801] NFS: Registering the id_resolver key type [ 0.081859] Key type id_resolver registered [ 0.081866] Key type id_legacy registered [ 0.082024] bounce: pool size: 64 pages [ 0.082240] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250) [ 0.082258] io scheduler noop registered [ 0.082268] io scheduler deadline registered [ 0.082449] io scheduler cfq registered (default) [ 0.084552] sun4i-pinctrl 1c20800.pinctrl: initialized sunXi PIO driver [ 0.140722] Serial: 8250/16550 driver, 8 ports, IRQ sharing disabled [ 0.143546] console [ttyS0] disabled [ 0.163626] dw-apb-uart 1c28000.serial: ttyS0 at MMIO 0x1c28000 (irq = 29, base_baud = 1500000) is a U6_16550A [ 0.626265] console [ttyS0] enabled
[PYBOOT] [cubie 01:44]: Timed out waiting for "<type 'str'>":
[PYBOOT] [cubie 01:45]: got exception: timeout ~$off
[PYBOOT] [cubie 01:46]: Done.
========================================================================
Board cubie2-arm-multi_lpae_defconfig failure log: -------------------------------------------------
[ 0.987213] usbcore: registered new interface driver cdc_subset [ 0.993181] usbcore: registered new interface driver zaurus [ 0.998869] usbcore: registered new interface driver cdc_ncm [ 1.004573] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.011109] ehci-pci: EHCI PCI platform driver [ 1.015615] ehci-platform: EHCI generic platform driver [ 1.021035] platform 1c14000.usb: Driver ehci-platform requests probe deferral [ 1.028353] platform 1c1c000.usb: Driver ehci-platform requests probe deferral [ 1.035679] ehci-omap: OMAP-EHCI Host Controller driver [ 1.041034] ehci-orion: EHCI orion driver [ 1.045139] SPEAr-ehci: EHCI SPEAr driver [ 1.049260] tegra-ehci: Tegra EHCI driver [ 1.053370] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.059594] ohci-pci: OHCI PCI platform driver [ 1.064112] ohci-platform: OHCI generic platform driver [ 1.069483] platform 1c14400.usb: Driver ohci-platform requests probe deferral [ 1.076789] platform 1c1c400.usb: Driver ohci-platform requests probe deferral [ 1.084083] ohci-omap3: OHCI OMAP3 driver [ 1.088184] SPEAr-ohci: OHCI SPEAr driver [ 1.092853] usbcore: registered new interface driver usb-storage [ 1.100146] mousedev: PS/2 mouse device common for all mice [ 1.108039] sunxi-rtc 1c20d00.rtc: rtc core: registered rtc-sunxi as rtc0 [ 1.114885] sunxi-rtc 1c20d00.rtc: RTC enabled [ 1.119915] i2c /dev entries driver [ 1.126254] usbcore: registered new interface driver uvcvideo [ 1.132059] USB Video Class driver (1.1.1) [ 1.136174] gspca_main: v2.14.0 registered [ 1.142117] sunxi-wdt 1c20c90.watchdog: Watchdog enabled (timeout=16 sec, nowayout=0) [ 1.151211] sdhci: Secure Digital Host Controller Interface driver [ 1.157420] sdhci: Copyright(c) Pierre Ossman [ 1.162407] Synopsys Designware Multimedia Card Interface Driver [ 1.169226] sunxi-mmc 1c0f000.mmc: No vqmmc regulator found [ 1.175297] sunxi-mmc 1c0f000.mmc: Got CD GPIO
[PYBOOT] [cubie2 01:38]: Timed out waiting for "<type 'str'>":
[PYBOOT] [cubie2 01:39]: got exception: timeout ~$off
[PYBOOT] [cubie2 01:40]: Done.
========================================================================
Board cubie2-arm-multi_v7_defconfig failure log: -------------------------------------------------
[ 0.987111] usbcore: registered new interface driver cdc_subset [ 0.993082] usbcore: registered new interface driver zaurus [ 0.998758] usbcore: registered new interface driver cdc_ncm [ 1.004460] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.010998] ehci-pci: EHCI PCI platform driver [ 1.015507] ehci-platform: EHCI generic platform driver [ 1.020923] platform 1c14000.usb: Driver ehci-platform requests probe deferral [ 1.028241] platform 1c1c000.usb: Driver ehci-platform requests probe deferral [ 1.035567] ehci-omap: OMAP-EHCI Host Controller driver [ 1.040924] ehci-orion: EHCI orion driver [ 1.045047] SPEAr-ehci: EHCI SPEAr driver [ 1.049165] tegra-ehci: Tegra EHCI driver [ 1.053270] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.059491] ohci-pci: OHCI PCI platform driver [ 1.064014] ohci-platform: OHCI generic platform driver [ 1.069382] platform 1c14400.usb: Driver ohci-platform requests probe deferral [ 1.076684] platform 1c1c400.usb: Driver ohci-platform requests probe deferral [ 1.083977] ohci-omap3: OHCI OMAP3 driver [ 1.088081] SPEAr-ohci: OHCI SPEAr driver [ 1.092749] usbcore: registered new interface driver usb-storage [ 1.100041] mousedev: PS/2 mouse device common for all mice [ 1.107916] sunxi-rtc 1c20d00.rtc: rtc core: registered rtc-sunxi as rtc0 [ 1.114760] sunxi-rtc 1c20d00.rtc: RTC enabled [ 1.119785] i2c /dev entries driver [ 1.126125] usbcore: registered new interface driver uvcvideo [ 1.131932] USB Video Class driver (1.1.1) [ 1.136047] gspca_main: v2.14.0 registered [ 1.141995] sunxi-wdt 1c20c90.watchdog: Watchdog enabled (timeout=16 sec, nowayout=0) [ 1.151085] sdhci: Secure Digital Host Controller Interface driver [ 1.157289] sdhci: Copyright(c) Pierre Ossman [ 1.162279] Synopsys Designware Multimedia Card Interface Driver [ 1.169102] sunxi-mmc 1c0f000.mmc: No vqmmc regulator found [ 1.175174] sunxi-mmc 1c0f000.mmc: Got CD GPIO
[PYBOOT] [cubie2 01:38]: Timed out waiting for "<type 'str'>":
[PYBOOT] [cubie2 01:39]: got exception: timeout ~$off
[PYBOOT] [cubie2 01:40]: Done.
========================================================================
Board cubie2-arm-sunxi_defconfig failure log: -------------------------------------------------
[ 0.024851] usbcore: registered new interface driver hub [ 0.024913] usbcore: registered new device driver usb [ 0.025084] pps_core: LinuxPPS API ver. 1 registered [ 0.025092] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti giometti@linux.it [ 0.025121] PTP clock support registered [ 0.026129] Switched to clocksource arch_sys_counter [ 0.035170] NET: Registered protocol family 2 [ 0.035816] TCP established hash table entries: 8192 (order: 3, 32768 bytes) [ 0.035904] TCP bind hash table entries: 8192 (order: 4, 65536 bytes) [ 0.036026] TCP: Hash tables configured (established 8192 bind 8192) [ 0.036164] TCP: reno registered [ 0.036182] UDP hash table entries: 512 (order: 2, 16384 bytes) [ 0.036238] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) [ 0.036470] NET: Registered protocol family 1 [ 0.036900] RPC: Registered named UNIX socket transport module. [ 0.036913] RPC: Registered udp transport module. [ 0.036919] RPC: Registered tcp transport module. [ 0.036926] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.037456] hw perfevents: enabled with armv7_cortex_a7 PMU driver, 5 counters available [ 0.038573] futex hash table entries: 512 (order: 3, 32768 bytes) [ 0.048591] NFS: Registering the id_resolver key type [ 0.048659] Key type id_resolver registered [ 0.048666] Key type id_legacy registered [ 0.048851] bounce: pool size: 64 pages [ 0.049082] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250) [ 0.049100] io scheduler noop registered [ 0.049111] io scheduler deadline registered [ 0.049305] io scheduler cfq registered (default) [ 0.052006] sun7i-a20-pinctrl 1c20800.pinctrl: initialized sunXi PIO driver [ 0.106352] Serial: 8250/16550 driver, 8 ports, IRQ sharing disabled [ 0.109267] console [ttyS0] disabled [ 0.129485] dw-apb-uart 1c28000.serial: ttyS0 at MMIO 0x1c28000 (irq = 33, base_baud = 1500000) is a U6_16550A [ 0.653121] console [ttyS0] enabled
[PYBOOT] [cubie2 01:43]: Timed out waiting for "<type 'str'>":
[PYBOOT] [cubie2 01:44]: got exception: timeout ~$off
[PYBOOT] [cubie2 01:45]: Done.
========================================================================
Board odroidu3-arm-exynos_defconfig failure log: -------------------------------------------------
[ 0.174020] BUCK6_1.35V: 1350 mV [ 0.175171] BUCK7_2.0V: 2000 mV [ 0.177143] BUCK8_2.8V: 2800 mV [ 0.177937] BUCK9: at 1200 mV [ 0.178660] s3c-i2c 13860000.i2c: i2c-0: S3C I2C adapter [ 0.178942] s3c-i2c 13870000.i2c: slave address 0x00 [ 0.178963] s3c-i2c 13870000.i2c: bus frequency set to 71 KHz [ 0.179788] s3c-i2c 13870000.i2c: i2c-1: S3C I2C adapter [ 0.183072] Advanced Linux Sound Architecture Driver Initialized. [ 0.184117] Switched to clocksource mct-frc [ 0.205818] NET: Registered protocol family 2 [ 0.206664] TCP established hash table entries: 8192 (order: 3, 32768 bytes) [ 0.206767] TCP bind hash table entries: 8192 (order: 5, 163840 bytes) [ 0.206958] TCP: Hash tables configured (established 8192 bind 8192) [ 0.207070] TCP: reno registered [ 0.207091] UDP hash table entries: 512 (order: 2, 24576 bytes) [ 0.207134] UDP-Lite hash table entries: 512 (order: 2, 24576 bytes) [ 0.207400] NET: Registered protocol family 1 [ 0.210306] futex hash table entries: 1024 (order: 4, 65536 bytes) [ 0.223908] romfs: ROMFS MTD (C) 2007 Red Hat, Inc. [ 0.224309] msgmni has been set to 1472 [ 0.225298] bounce: pool size: 64 pages [ 0.225324] io scheduler noop registered [ 0.225338] io scheduler deadline registered [ 0.225813] io scheduler cfq registered (default) [ 0.235307] dma-pl330 12680000.pdma: Loaded driver for PL330 DMAC-1315632 [ 0.235333] dma-pl330 12680000.pdma: DBUFF-32x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32 [ 0.240781] dma-pl330 12690000.pdma: Loaded driver for PL330 DMAC-1315632 [ 0.240801] dma-pl330 12690000.pdma: DBUFF-32x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32 [ 0.242600] dma-pl330 12850000.mdma: Loaded driver for PL330 DMAC-1315632 [ 0.242624] dma-pl330 12850000.mdma: DBUFF-64x8bytes Num_Chans-8 Num_Peri-1 Num_Events-32 [ 0.381966] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [ 0.384599] samsung-uart 13800000.serial: ttySAC0 at MMIO 0x13800000 (irq = 84, base_baud = 0) is a S3C6400/10 [ 0.385246] samsung-uart 13810000.serial: ttySAC1 at MMIO 0x13810000 (irq = 85, base_baud = 0)à [PYBOOT] [odroidu3 01:43]: Timed out waiting for "<type 'str'>":
[PYBOOT] [odroidu3 01:44]: got exception: timeout ~$off
[PYBOOT] [odroidu3 01:46]: Done.
========================================================================
Board pi-arm-exynos_defconfig failure log: -------------------------------------------------
[ 0.079355] s3c-i2c 12c80000.i2c: bus frequency set to 65 KHz [ 0.079508] s3c-i2c 12c80000.i2c: i2c-2: S3C I2C adapter [ 0.082116] Advanced Linux Sound Architecture Driver Initialized. [ 0.082683] Switched to clocksource mct-frc [ 0.092100] NET: Registered protocol family 2 [ 0.092455] TCP established hash table entries: 8192 (order: 3, 32768 bytes) [ 0.092512] TCP bind hash table entries: 8192 (order: 5, 163840 bytes) [ 0.092603] TCP: Hash tables configured (established 8192 bind 8192) [ 0.092640] TCP: reno registered [ 0.092650] UDP hash table entries: 512 (order: 2, 24576 bytes) [ 0.092673] UDP-Lite hash table entries: 512 (order: 2, 24576 bytes) [ 0.092872] NET: Registered protocol family 1 [ 0.094631] futex hash table entries: 2048 (order: 5, 131072 bytes) [ 0.105422] romfs: ROMFS MTD (C) 2007 Red Hat, Inc. [ 0.105594] msgmni has been set to 1455 [ 0.106304] bounce: pool size: 64 pages [ 0.106315] io scheduler noop registered [ 0.106324] io scheduler deadline registered [ 0.106645] io scheduler cfq registered (default) [ 0.106786] exynos-dp-video-phy 10040728.video-phy: Failed to lookup PMU regmap [ 0.111213] dma-pl330 3880000.adma: Loaded driver for PL330 DMAC-2364208 [ 0.111222] dma-pl330 3880000.adma: DBUFF-4x8bytes Num_Chans-6 Num_Peri-16 Num_Events-6 [ 0.114334] dma-pl330 121a0000.pdma: Loaded driver for PL330 DMAC-2364208 [ 0.114343] dma-pl330 121a0000.pdma: DBUFF-32x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32 [ 0.117442] dma-pl330 121b0000.pdma: Loaded driver for PL330 DMAC-2364208 [ 0.117450] dma-pl330 121b0000.pdma: DBUFF-32x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32 [ 0.118404] dma-pl330 10800000.mdma: Loaded driver for PL330 DMAC-2364208 [ 0.118412] dma-pl330 10800000.mdma: DBUFF-64x8bytes Num_Chans-8 Num_Peri-1 Num_Events-32 [ 0.172619] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [ 0.173976] samsung-uart 12c00000.serial: ttySAC0 at MMIO 0x12c00000 (irq = 83, base_baud = 0) is a S3C6400/10 [ 0.174280] samsung-uart 12c10000.serial: ttySAC1 at MMIO 0x12c10000 (irq = 84, base_baud = 0) is a S3C6400/10 [ 0.174575] samsung-uart 12c20000.serial: ttySAC2 at MMIO 0x12c20000 (irq = 85, base_baud = 0) is a S3C6400/10 [ 0.174946] samsung-uart 12c30000.serial: ttySAC3 at MMIO 0x12c30000 (irq = 86, base_baud = 0) is a S3C6400/10 [ 0.742008] console [ttySA [PYBOOT] [pi 01:49]: Timed out waiting for "<type 'str'>":
[PYBOOT] [pi 01:50]: got exception: timeout ~$off
[PYBOOT] [pi 01:51]: Done.
========================================================================
Board pi-arm-multi_lpae_defconfig failure log: -------------------------------------------------
[ 0.052435] UDP hash table entries: 512 (order: 2, 16384 bytes) [ 0.052452] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) [ 0.052559] NET: Registered protocol family 1 [ 0.052741] RPC: Registered named UNIX socket transport module. [ 0.052747] RPC: Registered udp transport module. [ 0.052751] RPC: Registered tcp transport module. [ 0.052756] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.054189] futex hash table entries: 2048 (order: 5, 131072 bytes) [ 0.061248] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.061715] NFS: Registering the id_resolver key type [ 0.061732] Key type id_resolver registered [ 0.061737] Key type id_legacy registered [ 0.061770] msgmni has been set to 1446 [ 0.062016] bounce: pool size: 64 pages [ 0.062138] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249) [ 0.062148] io scheduler noop registered [ 0.062156] io scheduler deadline registered [ 0.062273] io scheduler cfq registered (default) [ 0.062598] exynos-dp-video-phy 10040728.video-phy: Failed to lookup PMU regmap [ 0.067429] platform backlight: Driver pwm-backlight requests probe deferral [ 0.069226] dma-pl330 3880000.adma: Loaded driver for PL330 DMAC-2364208 [ 0.069234] dma-pl330 3880000.adma: DBUFF-4x8bytes Num_Chans-6 Num_Peri-16 Num_Events-6 [ 0.071009] dma-pl330 121a0000.pdma: Loaded driver for PL330 DMAC-2364208 [ 0.071017] dma-pl330 121a0000.pdma: DBUFF-32x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32 [ 0.072859] dma-pl330 121b0000.pdma: Loaded driver for PL330 DMAC-2364208 [ 0.072866] dma-pl330 121b0000.pdma: DBUFF-32x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32 [ 0.073390] dma-pl330 10800000.mdma: Loaded driver for PL330 DMAC-2364208 [ 0.073397] dma-pl330 10800000.mdma: DBUFF-64x8bytes Num_Chans-8 Num_Peri-1 Num_Events-32 [ 0.108296] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [ 0.109406] samsung-uart 12c00000.serial: ttySAC0 at MMIO 0x12c00000 (irq = 83, base_baud = 0) is a S3C6400/10 [ 0.109628] samsung-uart 12c10000.serial: ttySAC1 at MMIO 0x12c10000 (irq = 84, base_baud = 0) is a S3C6400/10 [ 0.109837] samsung-uart 12c20000.serial: ttySAC2 at MMIO 0x12c20000 (irq = 85, base_baud = 0) is a S3C6400/10 [ 0.110045] samsung-uart 12c30000.serial: ttySAC3 at MMIO 0x12c30000 (irq = 86, base_baud = 0) is a S3C6400/10 [ 0.767313] console [ttù [PYBOOT] [pi 01:49]: Timed out waiting for "<type 'str'>":
[PYBOOT] [pi 01:50]: got exception: timeout ~$off
[PYBOOT] [pi 01:51]: Done.
========================================================================
Board pi-arm-multi_v7_defconfig failure log: -------------------------------------------------
[ 0.052382] UDP hash table entries: 512 (order: 2, 16384 bytes) [ 0.052399] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) [ 0.052505] NET: Registered protocol family 1 [ 0.052688] RPC: Registered named UNIX socket transport module. [ 0.052693] RPC: Registered udp transport module. [ 0.052698] RPC: Registered tcp transport module. [ 0.052703] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.054127] futex hash table entries: 2048 (order: 5, 131072 bytes) [ 0.061159] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.061626] NFS: Registering the id_resolver key type [ 0.061644] Key type id_resolver registered [ 0.061650] Key type id_legacy registered [ 0.061683] msgmni has been set to 1446 [ 0.061928] bounce: pool size: 64 pages [ 0.062049] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249) [ 0.062059] io scheduler noop registered [ 0.062067] io scheduler deadline registered [ 0.062184] io scheduler cfq registered (default) [ 0.062508] exynos-dp-video-phy 10040728.video-phy: Failed to lookup PMU regmap [ 0.067335] platform backlight: Driver pwm-backlight requests probe deferral [ 0.069134] dma-pl330 3880000.adma: Loaded driver for PL330 DMAC-2364208 [ 0.069142] dma-pl330 3880000.adma: DBUFF-4x8bytes Num_Chans-6 Num_Peri-16 Num_Events-6 [ 0.070915] dma-pl330 121a0000.pdma: Loaded driver for PL330 DMAC-2364208 [ 0.070922] dma-pl330 121a0000.pdma: DBUFF-32x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32 [ 0.072765] dma-pl330 121b0000.pdma: Loaded driver for PL330 DMAC-2364208 [ 0.072772] dma-pl330 121b0000.pdma: DBUFF-32x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32 [ 0.073296] dma-pl330 10800000.mdma: Loaded driver for PL330 DMAC-2364208 [ 0.073303] dma-pl330 10800000.mdma: DBUFF-64x8bytes Num_Chans-8 Num_Peri-1 Num_Events-32 [ 0.108168] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [ 0.109279] samsung-uart 12c00000.serial: ttySAC0 at MMIO 0x12c00000 (irq = 83, base_baud = 0) is a S3C6400/10 [ 0.109500] samsung-uart 12c10000.serial: ttySAC1 at MMIO 0x12c10000 (irq = 84, base_baud = 0) is a S3C6400/10 [ 0.109708] samsung-uart 12c20000.serial: ttySAC2 at MMIO 0x12c20000 (irq = 85, base_baud = 0) is a S3C6400/10 [ 0.109917] samsung-uart 12c30000.serial: ttySAC3 at MMIO 0x12c30000 (irq = 86, base_baud = 0) is a S3C6400/10 [ 0.767185] console [tty [PYBOOT] [pi 01:46]: Timed out waiting for "<type 'str'>":
[PYBOOT] [pi 01:47]: got exception: timeout ~$off
[PYBOOT] [pi 01:49]: Done.
========================================================================
Board pit-arm-exynos_defconfig failure log: -------------------------------------------------
[ 0.073947] s3c-i2c 12c80000.i2c: bus frequency set to 65 KHz [ 0.074099] s3c-i2c 12c80000.i2c: i2c-2: S3C I2C adapter [ 0.076716] Advanced Linux Sound Architecture Driver Initialized. [ 0.077353] Switched to clocksource mct-frc [ 0.086861] NET: Registered protocol family 2 [ 0.087220] TCP established hash table entries: 8192 (order: 3, 32768 bytes) [ 0.087274] TCP bind hash table entries: 8192 (order: 5, 163840 bytes) [ 0.087401] TCP: Hash tables configured (established 8192 bind 8192) [ 0.087439] TCP: reno registered [ 0.087449] UDP hash table entries: 512 (order: 2, 24576 bytes) [ 0.087472] UDP-Lite hash table entries: 512 (order: 2, 24576 bytes) [ 0.087626] NET: Registered protocol family 1 [ 0.089416] futex hash table entries: 2048 (order: 5, 131072 bytes) [ 0.100326] romfs: ROMFS MTD (C) 2007 Red Hat, Inc. [ 0.100501] msgmni has been set to 1455 [ 0.101221] bounce: pool size: 64 pages [ 0.101231] io scheduler noop registered [ 0.101240] io scheduler deadline registered [ 0.101563] io scheduler cfq registered (default) [ 0.101702] exynos-dp-video-phy 10040728.video-phy: Failed to lookup PMU regmap [ 0.106176] dma-pl330 3880000.adma: Loaded driver for PL330 DMAC-2364208 [ 0.106185] dma-pl330 3880000.adma: DBUFF-4x8bytes Num_Chans-6 Num_Peri-16 Num_Events-6 [ 0.109337] dma-pl330 121a0000.pdma: Loaded driver for PL330 DMAC-2364208 [ 0.109346] dma-pl330 121a0000.pdma: DBUFF-32x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32 [ 0.112592] dma-pl330 121b0000.pdma: Loaded driver for PL330 DMAC-2364208 [ 0.112600] dma-pl330 121b0000.pdma: DBUFF-32x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32 [ 0.113513] dma-pl330 10800000.mdma: Loaded driver for PL330 DMAC-2364208 [ 0.113521] dma-pl330 10800000.mdma: DBUFF-64x8bytes Num_Chans-8 Num_Peri-1 Num_Events-32 [ 0.168255] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [ 0.169596] samsung-uart 12c00000.serial: ttySAC0 at MMIO 0x12c00000 (irq = 83, base_baud = 0) is a S3C6400/10 [ 0.169904] samsung-uart 12c10000.serial: ttySAC1 at MMIO 0x12c10000 (irq = 84, base_baud = 0) is a S3C6400/10 [ 0.170207] samsung-uart 12c20000.serial: ttySAC2 at MMIO 0x12c20000 (irq = 85, base_baud = 0) is a S3C6400/10 [ 0.170509] samsung-uart 12c30000.serial: ttySAC3 at MMIO 0x12c30000 (irq = 86, base_baud = 0) is a S3C6400/10 [ 0.737568] console [ttySA [PYBOOT] [pit 01:47]: Timed out waiting for "<type 'str'>":
[PYBOOT] [pit 01:48]: got exception: timeout ~$off
[PYBOOT] [pit 01:49]: Done.
========================================================================
Board pit-arm-multi_lpae_defconfig failure log: -------------------------------------------------
[ 0.052835] UDP hash table entries: 512 (order: 2, 16384 bytes) [ 0.052853] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) [ 0.052957] NET: Registered protocol family 1 [ 0.053137] RPC: Registered named UNIX socket transport module. [ 0.053143] RPC: Registered udp transport module. [ 0.053147] RPC: Registered tcp transport module. [ 0.053152] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.054588] futex hash table entries: 2048 (order: 5, 131072 bytes) [ 0.061715] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.062163] NFS: Registering the id_resolver key type [ 0.062182] Key type id_resolver registered [ 0.062187] Key type id_legacy registered [ 0.062221] msgmni has been set to 1446 [ 0.062464] bounce: pool size: 64 pages [ 0.062590] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249) [ 0.062600] io scheduler noop registered [ 0.062608] io scheduler deadline registered [ 0.062724] io scheduler cfq registered (default) [ 0.063049] exynos-dp-video-phy 10040728.video-phy: Failed to lookup PMU regmap [ 0.067904] platform backlight: Driver pwm-backlight requests probe deferral [ 0.069719] dma-pl330 3880000.adma: Loaded driver for PL330 DMAC-2364208 [ 0.069727] dma-pl330 3880000.adma: DBUFF-4x8bytes Num_Chans-6 Num_Peri-16 Num_Events-6 [ 0.071512] dma-pl330 121a0000.pdma: Loaded driver for PL330 DMAC-2364208 [ 0.071519] dma-pl330 121a0000.pdma: DBUFF-32x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32 [ 0.073369] dma-pl330 121b0000.pdma: Loaded driver for PL330 DMAC-2364208 [ 0.073377] dma-pl330 121b0000.pdma: DBUFF-32x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32 [ 0.073903] dma-pl330 10800000.mdma: Loaded driver for PL330 DMAC-2364208 [ 0.073910] dma-pl330 10800000.mdma: DBUFF-64x8bytes Num_Chans-8 Num_Peri-1 Num_Events-32 [ 0.109028] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [ 0.110145] samsung-uart 12c00000.serial: ttySAC0 at MMIO 0x12c00000 (irq = 83, base_baud = 0) is a S3C6400/10 [ 0.110370] samsung-uart 12c10000.serial: ttySAC1 at MMIO 0x12c10000 (irq = 84, base_baud = 0) is a S3C6400/10 [ 0.110579] samsung-uart 12c20000.serial: ttySAC2 at MMIO 0x12c20000 (irq = 85, base_baud = 0) is a S3C6400/10 [ 0.110786] samsung-uart 12c30000.serial: ttySAC3 at MMIO 0x12c30000 (irq = 86, base_baud = 0) is a S3C6400/10 [ 0.768048] console [tty [PYBOOT] [pit 01:48]: Timed out waiting for "<type 'str'>":
[PYBOOT] [pit 01:49]: got exception: timeout ~$off
[PYBOOT] [pit 01:51]: Done.
========================================================================
Board pit-arm-multi_v7_defconfig failure log: -------------------------------------------------
[ 0.052838] UDP hash table entries: 512 (order: 2, 16384 bytes) [ 0.052856] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) [ 0.052960] NET: Registered protocol family 1 [ 0.053140] RPC: Registered named UNIX socket transport module. [ 0.053145] RPC: Registered udp transport module. [ 0.053150] RPC: Registered tcp transport module. [ 0.053155] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.054592] futex hash table entries: 2048 (order: 5, 131072 bytes) [ 0.061728] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.062177] NFS: Registering the id_resolver key type [ 0.062195] Key type id_resolver registered [ 0.062201] Key type id_legacy registered [ 0.062235] msgmni has been set to 1446 [ 0.062480] bounce: pool size: 64 pages [ 0.062604] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249) [ 0.062614] io scheduler noop registered [ 0.062622] io scheduler deadline registered [ 0.062738] io scheduler cfq registered (default) [ 0.063064] exynos-dp-video-phy 10040728.video-phy: Failed to lookup PMU regmap [ 0.067917] platform backlight: Driver pwm-backlight requests probe deferral [ 0.069734] dma-pl330 3880000.adma: Loaded driver for PL330 DMAC-2364208 [ 0.069742] dma-pl330 3880000.adma: DBUFF-4x8bytes Num_Chans-6 Num_Peri-16 Num_Events-6 [ 0.071530] dma-pl330 121a0000.pdma: Loaded driver for PL330 DMAC-2364208 [ 0.071537] dma-pl330 121a0000.pdma: DBUFF-32x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32 [ 0.073386] dma-pl330 121b0000.pdma: Loaded driver for PL330 DMAC-2364208 [ 0.073393] dma-pl330 121b0000.pdma: DBUFF-32x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32 [ 0.073919] dma-pl330 10800000.mdma: Loaded driver for PL330 DMAC-2364208 [ 0.073926] dma-pl330 10800000.mdma: DBUFF-64x8bytes Num_Chans-8 Num_Peri-1 Num_Events-32 [ 0.109066] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [ 0.110180] samsung-uart 12c00000.serial: ttySAC0 at MMIO 0x12c00000 (irq = 83, base_baud = 0) is a S3C6400/10 [ 0.110402] samsung-uart 12c10000.serial: ttySAC1 at MMIO 0x12c10000 (irq = 84, base_baud = 0) is a S3C6400/10 [ 0.110611] samsung-uart 12c20000.serial: ttySAC2 at MMIO 0x12c20000 (irq = 85, base_baud = 0) is a S3C6400/10 [ 0.110819] samsung-uart 12c30000.serial: ttySAC3 at MMIO 0x12c30000 (irq = 86, base_baud = 0) is a S3C6400/10 [ 0.768083] console [tty [PYBOOT] [pit 01:50]: Timed out waiting for "<type 'str'>":
[PYBOOT] [pit 01:51]: got exception: timeout ~$off
[PYBOOT] [pit 01:52]: Done.
========================================================================
Board sama5-arm-sama5_defconfig failure log: -------------------------------------------------
gpio-at91 fffff600.gpio: at address fefff600 gpio-at91 fffff800.gpio: at address fefff800 gpio-at91 fffffa00.gpio: at address fefffa00 pinctrl-at91 ahb:apb:pinctrl@fffff200: initialized AT91 pinctrl driver at_hdmac ffffe600.dma-controller: Atmel AHB DMA Controller ( cpy slave ), 8 channels at_hdmac ffffe800.dma-controller: Atmel AHB DMA Controller ( cpy slave ), 8 channels SCSI subsystem initialized usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb at91_i2c f0018000.i2c: using dma0chan0 (tx) and dma0chan1 (rx) for DMA transfers at91_i2c f0018000.i2c: AT91 i2c bus driver. Advanced Linux Sound Architecture Driver Initialized. cfg80211: Calling CRDA to update world regulatory domain Switched to clocksource tcb_clksrc NET: Registered protocol family 2 TCP established hash table entries: 4096 (order: 2, 16384 bytes) TCP bind hash table entries: 4096 (order: 2, 16384 bytes) TCP: Hash tables configured (established 4096 bind 4096) TCP: reno registered UDP hash table entries: 256 (order: 0, 4096 bytes) UDP-Lite hash table entries: 256 (order: 0, 4096 bytes) NET: Registered protocol family 1 RPC: Registered named UNIX socket transport module. RPC: Registered udp transport module. RPC: Registered tcp transport module. RPC: Registered tcp NFSv4.1 backchannel transport module. futex hash table entries: 256 (order: -1, 3072 bytes) msgmni has been set to 1002 io scheduler noop registered (default) atmel_usart f0020000.serial: ttyS2 at MMIO 0xf0020000 (irq = 29, base_baud = 4125000) is a ATMEL_SERIAL atmel_usart ffffee00.serial: ttyS0 at MMIO 0xffffee00 (irq = 38, base_baud = 8250000) is a ATMEL_SERIAL console [ttyS0] enabled
[PYBOOT] [sama5 01:44]: Timed out waiting for "<type 'str'>":
[PYBOOT] [sama5 01:45]: got exception: timeout ~$off
[PYBOOT] [sama5 01:46]: Done.
========================================================================
Board snow-arm-exynos_defconfig failure log: -------------------------------------------------
[ 0.109820] NET: Registered protocol family 2 [ 0.110178] TCP established hash table entries: 8192 (order: 3, 32768 bytes) [ 0.110225] TCP bind hash table entries: 8192 (order: 5, 163840 bytes) [ 0.110320] TCP: Hash tables configured (established 8192 bind 8192) [ 0.110354] TCP: reno registered [ 0.110363] UDP hash table entries: 512 (order: 2, 24576 bytes) [ 0.110385] UDP-Lite hash table entries: 512 (order: 2, 24576 bytes) [ 0.110500] NET: Registered protocol family 1 [ 0.111698] futex hash table entries: 512 (order: 3, 32768 bytes) [ 0.120816] romfs: ROMFS MTD (C) 2007 Red Hat, Inc. [ 0.120962] msgmni has been set to 1472 [ 0.121281] bounce: pool size: 64 pages [ 0.121290] io scheduler noop registered [ 0.121298] io scheduler deadline registered [ 0.121588] io scheduler cfq registered (default) [ 0.121803] exynos-dp-video-phy 10040720.video-phy: Failed to lookup PMU regmap [ 0.123715] simple-framebuffer bfc00000.framebuffer: framebuffer at 0xbfc00000, 0x202000 bytes, mapped to 0xf0400000 [ 0.123723] simple-framebuffer bfc00000.framebuffer: format=r5g6b5, mode=1366x768x16, linelength=2732 [ 0.131561] Console: switching to colour frame buffer device 195x54 [ 0.138190] simple-framebuffer bfc00000.framebuffer: fb0: simplefb registered! [ 0.141462] dma-pl330 121a0000.pdma: Loaded driver for PL330 DMAC-2364208 [ 0.141471] dma-pl330 121a0000.pdma: DBUFF-32x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32 [ 0.144478] dma-pl330 121b0000.pdma: Loaded driver for PL330 DMAC-2364208 [ 0.144486] dma-pl330 121b0000.pdma: DBUFF-32x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32 [ 0.145315] dma-pl330 10800000.mdma: Loaded driver for PL330 DMAC-2364208 [ 0.145323] dma-pl330 10800000.mdma: DBUFF-64x8bytes Num_Chans-8 Num_Peri-1 Num_Events-32 [ 0.146417] dma-pl330 11c10000.mdma: Loaded driver for PL330 DMAC-2364208 [ 0.146426] dma-pl330 11c10000.mdma: DBUFF-64x8bytes Num_Chans-8 Num_Peri-1 Num_Events-32 [ 0.184395] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [ 0.185386] samsung-uart 12c00000.serial: ttySAC0 at MMIO 0x12c00000 (irq = 83, base_baud = 0) is a S3C6400/10 [ 0.185680] samsung-uart 12c10000.serial: ttySAC1 at MMIO 0x12c10000 (irq = 84, base_baud = 0) is a S3C6400/10 [ 0.185988] samsung-uart 12c20000.serial: ttySAC2 at MMIO 0x12c20000 (irq = 85, base_baud = 0) is a S3C6400/10 [ 0.186220] samsung-uart 12c30000.serial: ttySAC3 at MMIO 0x12c30000 (irq = 86, base_baud = 0) is a S3C6400/10 [ 1.377508] console [ttyó [PYBOOT] [snow 01:59]: Timed out waiting for "<type 'str'>":
[PYBOOT] [snow 02:00]: got exception: timeout ~$off
[PYBOOT] [snow 02:01]: Done.
========================================================================
Board snow-arm-multi_lpae_defconfig failure log: -------------------------------------------------
[ 0.075487] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.075497] PCI: CLS 0 bytes, default 64 [ 0.075838] hw perfevents: enabled with armv7_cortex_a15 PMU driver, 7 counters available [ 0.076526] futex hash table entries: 512 (order: 3, 32768 bytes) [ 0.081823] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.082161] NFS: Registering the id_resolver key type [ 0.082186] Key type id_resolver registered [ 0.082190] Key type id_legacy registered [ 0.082221] msgmni has been set to 1462 [ 0.082431] bounce: pool size: 64 pages [ 0.082523] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249) [ 0.082531] io scheduler noop registered [ 0.082538] io scheduler deadline registered [ 0.082626] io scheduler cfq registered (default) [ 0.082905] exynos-dp-video-phy 10040720.video-phy: Failed to lookup PMU regmap [ 0.085950] platform backlight: Driver pwm-backlight requests probe deferral [ 0.086138] simple-framebuffer bfc00000.framebuffer: framebuffer at 0xbfc00000, 0x202000 bytes, mapped to 0xf0400000 [ 0.086145] simple-framebuffer bfc00000.framebuffer: format=r5g6b5, mode=1366x768x16, linelength=2732 [ 0.088968] Console: switching to colour frame buffer device 170x48 [ 0.091586] simple-framebuffer bfc00000.framebuffer: fb0: simplefb registered! [ 0.093372] dma-pl330 121a0000.pdma: Loaded driver for PL330 DMAC-2364208 [ 0.093379] dma-pl330 121a0000.pdma: DBUFF-32x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32 [ 0.094663] dma-pl330 121b0000.pdma: Loaded driver for PL330 DMAC-2364208 [ 0.094670] dma-pl330 121b0000.pdma: DBUFF-32x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32 [ 0.095049] dma-pl330 10800000.mdma: Loaded driver for PL330 DMAC-2364208 [ 0.095056] dma-pl330 10800000.mdma: DBUFF-64x8bytes Num_Chans-8 Num_Peri-1 Num_Events-32 [ 0.095456] dma-pl330 11c10000.mdma: Loaded driver for PL330 DMAC-2364208 [ 0.095462] dma-pl330 11c10000.mdma: DBUFF-64x8bytes Num_Chans-8 Num_Peri-1 Num_Events-32 [ 0.123208] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [ 0.124145] samsung-uart 12c00000.serial: ttySAC0 at MMIO 0x12c00000 (irq = 83, base_baud = 0) is a S3C6400/10 [ 0.124326] samsung-uart 12c10000.serial: ttySAC1 at MMIO 0x12c10000 (irq = 84, base_baud = 0) is a S3C6400/10 [ 0.124487] samsung-uart 12c20000.serial: ttySAC2 at MMIO 0x12c20000 (irq = 85, base_baud = 0) is a S3C6400/10 [ 0.124646] samsung-uart 12c30000.serial: ttySAC3 at MMIO 0x12c30000 (irq = 86, base_baud = 0) is a S3C6400/10 [ 0.925060] console [ttù [PYBOOT] [snow 01:55]: Timed out waiting for "<type 'str'>":
[PYBOOT] [snow 01:56]: got exception: timeout ~$off
[PYBOOT] [snow 01:57]: Done.
========================================================================
Board snow-arm-multi_v7_defconfig failure log: -------------------------------------------------
[ 0.075057] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.075066] PCI: CLS 0 bytes, default 64 [ 0.075419] hw perfevents: enabled with armv7_cortex_a15 PMU driver, 7 counters available [ 0.076106] futex hash table entries: 512 (order: 3, 32768 bytes) [ 0.081392] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.081723] NFS: Registering the id_resolver key type [ 0.081741] Key type id_resolver registered [ 0.081745] Key type id_legacy registered [ 0.081776] msgmni has been set to 1462 [ 0.081999] bounce: pool size: 64 pages [ 0.082095] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249) [ 0.082104] io scheduler noop registered [ 0.082112] io scheduler deadline registered [ 0.082198] io scheduler cfq registered (default) [ 0.082476] exynos-dp-video-phy 10040720.video-phy: Failed to lookup PMU regmap [ 0.085520] platform backlight: Driver pwm-backlight requests probe deferral [ 0.085706] simple-framebuffer bfc00000.framebuffer: framebuffer at 0xbfc00000, 0x202000 bytes, mapped to 0xf0400000 [ 0.085713] simple-framebuffer bfc00000.framebuffer: format=r5g6b5, mode=1366x768x16, linelength=2732 [ 0.088535] Console: switching to colour frame buffer device 170x48 [ 0.091151] simple-framebuffer bfc00000.framebuffer: fb0: simplefb registered! [ 0.092948] dma-pl330 121a0000.pdma: Loaded driver for PL330 DMAC-2364208 [ 0.092955] dma-pl330 121a0000.pdma: DBUFF-32x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32 [ 0.094244] dma-pl330 121b0000.pdma: Loaded driver for PL330 DMAC-2364208 [ 0.094251] dma-pl330 121b0000.pdma: DBUFF-32x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32 [ 0.094631] dma-pl330 10800000.mdma: Loaded driver for PL330 DMAC-2364208 [ 0.094638] dma-pl330 10800000.mdma: DBUFF-64x8bytes Num_Chans-8 Num_Peri-1 Num_Events-32 [ 0.095011] dma-pl330 11c10000.mdma: Loaded driver for PL330 DMAC-2364208 [ 0.095017] dma-pl330 11c10000.mdma: DBUFF-64x8bytes Num_Chans-8 Num_Peri-1 Num_Events-32 [ 0.122745] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [ 0.123687] samsung-uart 12c00000.serial: ttySAC0 at MMIO 0x12c00000 (irq = 83, base_baud = 0) is a S3C6400/10 [ 0.123865] samsung-uart 12c10000.serial: ttySAC1 at MMIO 0x12c10000 (irq = 84, base_baud = 0) is a S3C6400/10 [ 0.124030] samsung-uart 12c20000.serial: ttySAC2 at MMIO 0x12c20000 (irq = 85, base_baud = 0) is a S3C6400/10 [ 0.124187] samsung-uart 12c30000.serial: ttySAC3 at MMIO 0x12c30000 (irq = 86, base_baud = 0) is a S3C6400/10 [ 0.924601] console [ttù [PYBOOT] [snow 01:57]: Timed out waiting for "<type 'str'>":
[PYBOOT] [snow 01:58]: got exception: timeout ~$off
[PYBOOT] [snow 01:59]: Done.
========================================================================
Board trimslice-arm-multi_v7_defconfig failure log: -------------------------------------------------
[ 1.870697] usb 2-1: new high-speed USB device number 2 using tegra-ehci [ 1.980701] usb 3-1: new high-speed USB device number 2 using tegra-ehci [ 2.022086] hub 2-1:1.0: USB hub found [ 2.025951] hub 2-1:1.0: 4 ports detected [ 2.222810] usb-storage 3-1:1.0: USB Mass Storage device detected [ 2.229597] scsi host0: usb-storage 3-1:1.0 [ 2.326188] usb 2-1.1: new high-speed USB device number 3 using tegra-ehci [ 2.806457] asix 2-1.1:1.0 eth0: register 'asix' at usb-c5008000.usb-1.1, ASIX AX88772 USB 2.0 Ethernet, 48:f8:b3:2b:28:b1 [ 4.554734] usb usb3-port1: cannot reset (err = -110) [ 4.783621] usb usb3-port1: cannot reset (err = -110) [ 5.012513] usb usb3-port1: cannot reset (err = -110) [ 5.241366] usb usb3-port1: cannot reset (err = -110) [ 5.470217] usb usb3-port1: cannot reset (err = -110) [ 5.475264] usb usb3-port1: Cannot enable. Maybe the USB cable is bad? [ 5.705631] usb usb3-port1: cannot reset (err = -110) [ 5.934619] usb usb3-port1: cannot reset (err = -110) [ 6.163512] usb usb3-port1: cannot reset (err = -110) [ 6.392360] usb usb3-port1: cannot reset (err = -110) [ 6.621214] usb usb3-port1: cannot reset (err = -110) [ 6.626260] usb usb3-port1: Cannot enable. Maybe the USB cable is bad? [ 6.856622] usb usb3-port1: cannot reset (err = -110) [ 7.085490] usb usb3-port1: cannot reset (err = -110) [ 7.314339] usb usb3-port1: cannot reset (err = -110) [ 7.543191] usb usb3-port1: cannot reset (err = -110) [ 7.772039] usb usb3-port1: cannot reset (err = -110) [ 7.777086] usb usb3-port1: Cannot enable. Maybe the USB cable is bad? [ 8.007547] usb usb3-port1: cannot reset (err = -110) [ 8.236396] usb usb3-port1: cannot reset (err = -110) [ 8.465245] usb usb3-port1: cannot reset (err = -110) [ 8.694098] usb usb3-port1: cannot reset (err = -110) [ 8.922963] usb usb3-port1: cannot reset (err = -110) [ 8.928012] usb usb3-port1: Cannot enable. Maybe the USB cable is bad? [ 8.934663] usb 3-1: USB disconnect, device number 2
[PYBOOT] [trimslice 01:51]: Timed out waiting for "<type 'str'>":
[PYBOOT] [trimslice 01:52]: got exception: timeout ~$off
[PYBOOT] [trimslice 01:53]: Done.