Failed boards:
cubie2 sunxi_defconfig : FAILED 1:23.13 cubie2 multi_v7_defconfig : FAILED 1:27.11 cubie2 multi_lpae_defconfig : FAILED 1:22.09 cubox multi_v7_defconfig : FAILED 1:33.69 hummingboard imx_v6_v7_defconfig : FAILED 0:33.78 hummingboard multi_v7_defconfig : FAILED 0:26.15 snowball u8500_defconfig : FAILED 2:12.39 snowball multi_v7_defconfig : FAILED 1:12.12 trimslice tegra_defconfig : FAILED 1:29.54 trimslice multi_v7_defconfig : FAILED 1:26.40 wandboard imx_v6_v7_defconfig : FAILED 0:28.06 wandboard multi_v7_defconfig : FAILED 0:25.68
Successful boards:
apc vt8500_v6_v7_defconfig : passed 1:17.96 arndale exynos_defconfig : passed 1:19.04 bbb omap2plus_defconfig : passed 1:35.14 bbb multi_v7_defconfig : passed 1:13.76 beaver tegra_defconfig : passed 1:59.63 beaver multi_v7_defconfig : passed 1:58.90 capri bcm_defconfig : passed 0:39.53 capri multi_v7_defconfig : passed 0:40.63 cubie sunxi_defconfig : passed 1:14.21 cubie multi_v7_defconfig : passed 1:16.11 dalmore tegra_defconfig : passed 1:12.06 dalmore multi_v7_defconfig : passed 1:13.36 dalmore multi_lpae_defconfig : passed 1:09.17 jetson tegra_defconfig : passed 0:47.49 jetson multi_v7_defconfig : passed 0:49.46 jetson multi_lpae_defconfig : passed 0:45.92 omap5uevm omap2plus_defconfig : warnings 1:15.80 omap5uevm multi_v7_defconfig : warnings 1:47.10 omap5uevm multi_lpae_defconfig : warnings 1:45.51 panda omap2plus_defconfig : warnings 1:36.11 panda multi_v7_defconfig : warnings 1:49.22 sama5 sama5_defconfig : warnings 1:56.36 seaboard tegra_defconfig : passed 0:53.45 seaboard multi_v7_defconfig : passed 0:58.62
Offline boards:
snow exynos_defconfig : OFFLINE 0:47.66
Board legend is available at http://arm-soc.lixom.net/boards.html
Last entries of failed logs below:
========================================================================
Board cubie2-multi_lpae_defconfig failure log: -------------------------------------------------
[ 0.996011] usbcore: registered new interface driver usb-storage [ 1.003444] mousedev: PS/2 mouse device common for all mice [ 1.010912] i2c /dev entries driver [ 1.016618] usbcore: registered new interface driver uvcvideo [ 1.022434] USB Video Class driver (1.1.1) [ 1.026549] gspca_main: v2.14.0 registered [ 1.033781] sunxi-wdt 1c20c90.watchdog: Watchdog enabled (timeout=16 sec, nowayout=0) [ 1.042577] sdhci: Secure Digital Host Controller Interface driver [ 1.048781] sdhci: Copyright(c) Pierre Ossman [ 1.053719] Synopsys Designware Multimedia Card Interface Driver [ 1.060074] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.066327] usbcore: registered new interface driver usbhid [ 1.071920] usbhid: USB HID core driver [ 1.078967] TCP: cubic registered [ 1.082374] NET: Registered protocol family 17 [ 1.086863] can: controller area network core (rev 20120528 abi 9) [ 1.093141] NET: Registered protocol family 29 [ 1.097613] can: raw protocol (rev 20120528) [ 1.101896] can: broadcast manager protocol (rev 20120528 t) [ 1.107569] can: netlink gateway (rev 20130117) max_hops=1 [ 1.113504] Key type dns_resolver registered [ 1.117960] ThumbEE CPU extension supported. [ 1.122266] Registering SWP/SWPB emulation handler [ 1.127872] vcc3v3: disabling [ 1.130901] vcc3v0: disabling [ 1.134581] ahci-5v: 5000 mV [ 1.138057] usb1-vbus: 5000 mV [ 1.141648] usb2-vbus: 5000 mV [ 1.145511] platform 1c14000.usb: Driver ehci-platform requests probe deferral [ 1.153549] platform 1c1c000.usb: Driver ehci-platform requests probe deferral [ 1.161412] /home/build/work/batch/drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 1.174481] platform 1c14000.usb: Driver ehci-platform requests probe deferral [ 1.182654] platform 1c1c000.usb: Driver ehci-platform requests probe deferral [ 1.234692] stmmac_open: DMA descriptors allocation failed [ 1.240304] IP-Config: Failed to open eth0 [ 1.244397] IP-Config: No network devices available [ 1.249428] ALSA device list: [ 1.252412] No soundcards found. ~$off # PYBOOT: Exception: timeout
========================================================================
Board cubie2-multi_v7_defconfig failure log: -------------------------------------------------
[ 0.996492] usbcore: registered new interface driver usb-storage [ 1.003935] mousedev: PS/2 mouse device common for all mice [ 1.011361] i2c /dev entries driver [ 1.017046] usbcore: registered new interface driver uvcvideo [ 1.022858] USB Video Class driver (1.1.1) [ 1.026972] gspca_main: v2.14.0 registered [ 1.034260] sunxi-wdt 1c20c90.watchdog: Watchdog enabled (timeout=16 sec, nowayout=0) [ 1.043078] sdhci: Secure Digital Host Controller Interface driver [ 1.049282] sdhci: Copyright(c) Pierre Ossman [ 1.054233] Synopsys Designware Multimedia Card Interface Driver [ 1.060577] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.066828] usbcore: registered new interface driver usbhid [ 1.072411] usbhid: USB HID core driver [ 1.079571] TCP: cubic registered [ 1.082907] NET: Registered protocol family 17 [ 1.087395] can: controller area network core (rev 20120528 abi 9) [ 1.093659] NET: Registered protocol family 29 [ 1.098127] can: raw protocol (rev 20120528) [ 1.102409] can: broadcast manager protocol (rev 20120528 t) [ 1.108082] can: netlink gateway (rev 20130117) max_hops=1 [ 1.114025] Key type dns_resolver registered [ 1.118485] ThumbEE CPU extension supported. [ 1.122788] Registering SWP/SWPB emulation handler [ 1.128404] vcc3v3: disabling [ 1.131435] vcc3v0: disabling [ 1.135055] ahci-5v: 5000 mV [ 1.138524] usb1-vbus: 5000 mV [ 1.142149] usb2-vbus: 5000 mV [ 1.146016] platform 1c14000.usb: Driver ehci-platform requests probe deferral [ 1.154060] platform 1c1c000.usb: Driver ehci-platform requests probe deferral [ 1.161910] /home/build/work/batch/drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 1.174995] platform 1c14000.usb: Driver ehci-platform requests probe deferral [ 1.183097] platform 1c1c000.usb: Driver ehci-platform requests probe deferral [ 1.234518] stmmac_open: DMA descriptors allocation failed [ 1.240131] IP-Config: Failed to open eth0 [ 1.244227] IP-Config: No network devices available [ 1.249255] ALSA device list: [ 1.252234] No soundcards found. ~$off # PYBOOT: Exception: timeout
========================================================================
Board cubie2-sunxi_defconfig failure log: -------------------------------------------------
[ 0.030286] RPC: Registered named UNIX socket transport module. [ 0.030301] RPC: Registered udp transport module. [ 0.030308] RPC: Registered tcp transport module. [ 0.030314] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.031353] futex hash table entries: 512 (order: 3, 32768 bytes) [ 0.039655] bounce: pool size: 64 pages [ 0.039886] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251) [ 0.039906] io scheduler noop registered [ 0.039917] io scheduler deadline registered [ 0.040096] io scheduler cfq registered (default) [ 0.042227] sun7i-a20-pinctrl 1c20800.pinctrl: initialized sunXi PIO driver [ 0.084276] Serial: 8250/16550 driver, 8 ports, IRQ sharing disabled [ 0.086796] console [ttyS0] disabled [ 0.106992] 1c28000.serial: ttyS0 at MMIO 0x1c28000 (irq = 33, base_baud = 1500000) is a U6_16550A [ 0.645460] console [ttyS0] enabled [ 0.650430] stmmaceth 1c50000.ethernet: no regulator found [ 0.656020] stmmaceth 1c50000.ethernet: no reset control found [ 0.661867] Ring mode enabled [ 0.664918] No HW DMA feature register supported [ 0.669442] Normal descriptors [ 0.672771] TX Checksum insertion supported [ 0.680425] libphy: stmmac: probed [ 0.683865] eth0: PHY ID 00008201 at 1 IRQ POLL (stmmac-0:01) active [ 0.690662] mousedev: PS/2 mouse device common for all mice [ 0.696561] i2c /dev entries driver [ 0.701647] sunxi-wdt 1c20c90.watchdog: Watchdog enabled (timeout=16 sec, nowayout=0) [ 0.710776] TCP: cubic registered [ 0.714146] NET: Registered protocol family 17 [ 0.718693] Registering SWP/SWPB emulation handler [ 0.724019] vcc3v3: disabling [ 0.726993] vcc3v0: disabling [ 0.730471] ahci-5v: 5000 mV [ 0.733735] usb1-vbus: 5000 mV [ 0.737103] usb2-vbus: 5000 mV [ 0.822322] No MAC Management Counters available [ 0.827079] stmmac_open: ERROR: allocating the WoL IRQ -61 (-22) [ 0.833681] IP-Config: Failed to open eth0 [ 0.837779] IP-Config: No network devices available ~$off # PYBOOT: Exception: timeout
========================================================================
Board cubox-multi_v7_defconfig failure log: -------------------------------------------------
[ 1.066696] orion-ehci f1051000.usb-host: EHCI Host Controller [ 1.072532] orion-ehci f1051000.usb-host: new USB bus registered, assigned bus number 1 [ 1.080538] orion-ehci f1051000.usb-host: can't setup: -12 [ 1.086013] orion-ehci f1051000.usb-host: USB bus 1 deregistered [ 1.092014] orion-ehci f1051000.usb-host: init f1051000.usb-host fail, -12 [ 1.098875] orion-ehci: probe of f1051000.usb-host failed with error -12 [ 1.105624] SPEAr-ehci: EHCI SPEAr driver [ 1.109737] tegra-ehci: Tegra EHCI driver [ 1.114281] usbcore: registered new interface driver usb-storage [ 1.121772] mousedev: PS/2 mouse device common for all mice [ 1.128799] rtc-mv f10d8500.real-time-clock: rtc core: registered f10d8500.real-time- as rtc0 [ 1.138054] i2c /dev entries driver [ 1.143359] usbcore: registered new interface driver uvcvideo [ 1.149092] USB Video Class driver (1.1.1) [ 1.153189] gspca_main: v2.14.0 registered [ 1.160469] orion_wdt: Initial timeout 25 sec [ 1.165981] sdhci: Secure Digital Host Controller Interface driver [ 1.172143] sdhci: Copyright(c) Pierre Ossman [ 1.177210] Synopsys Designware Multimedia Card Interface Driver [ 1.183606] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.189918] usbcore: registered new interface driver usbhid [ 1.195479] usbhid: USB HID core driver [ 1.202735] TCP: cubic registered [ 1.206105] NET: Registered protocol family 17 [ 1.210560] can: controller area network core (rev 20120528 abi 9) [ 1.216798] NET: Registered protocol family 29 [ 1.221242] can: raw protocol (rev 20120528) [ 1.225506] can: broadcast manager protocol (rev 20120528 t) [ 1.231161] can: netlink gateway (rev 20130117) max_hops=1 [ 1.237013] Key type dns_resolver registered [ 1.241484] ThumbEE CPU extension supported. [ 1.245765] Registering SWP/SWPB emulation handler [ 1.250554] PJ4 iWMMXt v2 coprocessor enabled. [ 1.256121] USB Power: 5000 mV [ 1.259668] rtc-mv f10d8500.real-time-clock: setting system clock to 2014-05-27 10:00:58 UTC (1401184858) [ 1.270187] ALSA device list: [ 1.273159] No soundcards found. [ 1.277059] Waiting for root device /dev/mmcblk0p2... ~$off # PYBOOT: Exception: timeout
========================================================================
Board hummingboard-imx_v6_v7_defconfig failure log: -------------------------------------------------
[<80357c20>] (device_add) from [<8035bf98>] (platform_device_add+0xb4/0x218) r9:00000000 r8:9e527e80 r7:00000002 r6:9e732c10 r5:9e732c00 r4:00000002 [<8035bee4>] (platform_device_add) from [<8043f958>] (ci_hdrc_add_device+0x1a0/0x1c8) r7:00000002 r6:9e475d7c r5:00000000 r4:00000000 [<8043f7b8>] (ci_hdrc_add_device) from [<80443dc4>] (ci_hdrc_imx_probe+0x1d0/0x2d8) r10:00000000 r9:00000000 r8:806c11c8 r7:00000000 r6:9e722c10 r5:9e53f000 r4:9e53f010 r3:9e475d7c [<80443bf4>] (ci_hdrc_imx_probe) from [<8035c24c>] (platform_drv_probe+0x20/0x50) r9:00000000 r8:8094cbf8 r7:00000000 r6:00000000 r5:8094cbf8 r4:9e53f010 [<8035c22c>] (platform_drv_probe) from [<8035a8cc>] (driver_probe_device+0x114/0x250) r5:9e53f010 r4:81171d54 [<8035a7b8>] (driver_probe_device) from [<8035aaf0>] (__driver_attach+0x9c/0xa0) r9:9e724cc0 r8:808f74c4 r7:00000000 r6:9e53f044 r5:8094cbf8 r4:9e53f010 [<8035aa54>] (__driver_attach) from [<80358ca8>] (bus_for_each_dev+0x68/0x9c) r6:8035aa54 r5:8094cbf8 r4:00000000 r3:00000000 [<80358c40>] (bus_for_each_dev) from [<8035a368>] (driver_attach+0x20/0x28) r6:8093b4d8 r5:9e721c80 r4:8094cbf8 [<8035a348>] (driver_attach) from [<80359fec>] (bus_add_driver+0x148/0x1f4) [<80359ea4>] (bus_add_driver) from [<8035b140>] (driver_register+0x80/0x100) r7:9e474000 r6:808e6234 r5:80913d60 r4:8094cbf8 [<8035b0c0>] (driver_register) from [<8035c218>] (__platform_driver_register+0x50/0x64) r5:80913d60 r4:80913d60 [<8035c1c8>] (__platform_driver_register) from [<808e624c>] (ci_hdrc_imx_driver_init+0x18/0x20) [<808e6234>] (ci_hdrc_imx_driver_init) from [<800089bc>] (do_one_initcall+0x88/0x1dc) [<80008934>] (do_one_initcall) from [<808b5d5c>] (kernel_init_freeable+0x10c/0x1d0) r10:808f74d0 r9:000000c4 r8:808f74c4 r7:8096d280 r6:8096d280 r5:00000006 r4:809039c0 [<808b5c50>] (kernel_init_freeable) from [<8066fe68>] (kernel_init+0x10/0xf4) r10:00000000 r9:00000000 r8:00000000 r7:00000000 r6:00000000 r5:8066fe58 r4:00000000 [<8066fe58>] (kernel_init) from [<8000eb48>] (ret_from_fork+0x14/0x2c) r4:00000000 r3:ffffffff Code: e595305c e5952058 e59fc110 e59f1110 (e5823004) ---[ end trace 15ca754a3e8cd311 ]--- Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b
---[ end Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b
~$off # PYBOOT: Exception: panic
========================================================================
Board hummingboard-multi_v7_defconfig failure log: -------------------------------------------------
[ 1.900845] sp : c0b55e78 ip : 00000000 fp : c0c33f40 [ 1.912324] r10: c0c34b58 r9 : c0c34958 r8 : 00000000 [ 1.917551] r7 : c0b54038 r6 : 00000100 r5 : c0b54000 r4 : c0b55e98 [ 1.924079] r3 : c0b55e78 r2 : 00000000 r1 : 00000000 r0 : 00000000 [ 1.930610] Flags: nZCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment kernel [ 1.937922] Control: 10c5387d Table: 2b438059 DAC: 00000015 [ 1.943671] Process swapper/0 (pid: 0, stack limit = 0xc0b54250) [ 1.949681] Stack: (0xc0b55e78 to 0xc0b56000) [ 1.954042] 5e60: c0b52208 dbbb12a8 [ 1.962224] 5e80: c0b55e98 00200200 00000000 c0b560c0 c0c34758 c0251fd8 db08dedc db08dedc [ 1.970407] 5ea0: 00000000 00000080 c0b56084 c0b56080 c0b54000 40000001 c0b56080 00000001 [ 1.978589] 5ec0: 00000100 c024bbac c0c30c0e c02859e8 c0b52390 c0b54008 0000000a c0c33c00 [ 1.986772] 5ee0: c0b54000 c0b54008 c0b560c0 ffff1714 c0804a20 00200000 00000000 c0b54020 [ 1.994953] 5f00: 00000057 00000000 f4000100 00000000 c0b52c20 c0b54000 00000000 c024bf84 [ 2.003134] 5f20: c0b52ad0 c020f000 f400010c c0b5c8d0 c0b55f50 c0208908 c020f300 c020f304 [ 2.011316] 5f40: 60000113 ffffffff c0b55f84 c0212400 ffffffed 00000000 ffffffed c021b8a0 [ 2.019497] 5f60: c0b5c4bc c0b54000 c0b5c450 00000000 00000000 c0b52c20 c0b54000 00000000 [ 2.027679] 5f80: 00000000 c0b55f98 c020f300 c020f304 60000113 ffffffff 00000000 c027b50c [ 2.035860] 5fa0: dbfffb00 c0c30c0c c0804a14 c0b54000 00000000 c0c30d80 00000000 c0ab3b90 [ 2.044043] 5fc0: ffffffff ffffffff c0ab35ec 00000000 00000000 c0b20368 00000000 c0c31114 [ 2.052227] 5fe0: c0b5c43c c0b20364 c0b60380 10204059 412fc09a 10208074 00000000 00000000 [ 2.060422] [<c0251db4>] (call_timer_fn.isra.33) from [<c0251fd8>] (run_timer_softirq+0x1c0/0x23c) [ 2.069394] [<c0251fd8>] (run_timer_softirq) from [<c024bbac>] (__do_softirq+0x120/0x274) [ 2.077582] [<c024bbac>] (__do_softirq) from [<c024bf84>] (irq_exit+0xac/0xf4) [ 2.084815] [<c024bf84>] (irq_exit) from [<c020f000>] (handle_IRQ+0x44/0x90) [ 2.091874] [<c020f000>] (handle_IRQ) from [<c0208908>] (gic_handle_irq+0x38/0x68) [ 2.099456] [<c0208908>] (gic_handle_irq) from [<c0212400>] (__irq_svc+0x40/0x50) [ 2.106941] Exception stack(0xc0b55f50 to 0xc0b55f98) [ 2.111997] 5f40: ffffffed 00000000 ffffffed c021b8a0 [ 2.120179] 5f60: c0b5c4bc c0b54000 c0b5c450 00000000 00000000 c0b52c20 c0b54000 00000000 [ 2.128359] 5f80: 00000000 c0b55f98 c020f300 c020f304 60000113 ffffffff [ 2.134985] [<c0212400>] (__irq_svc) from [<c020f304>] (arch_cpu_idle+0x38/0x3c) [ 2.142394] [<c020f304>] (arch_cpu_idle) from [<c027b50c>] (cpu_startup_entry+0x1f8/0x22c) [ 2.150672] [<c027b50c>] (cpu_startup_entry) from [<c0ab3b90>] (start_kernel+0x374/0x380) [ 2.158854] Code: bad PC value [ 2.161937] ---[ end trace 1e99cf8d0a09d038 ]--- [ 2.166570] Kernel panic - not syncing: Fatal exception in interrupt [ 2.172930] ---[ end Kernel panic - not syncing: Fatal exception in interrupt ~$off # PYBOOT: Exception: panic
========================================================================
Board snowball-multi_v7_defconfig failure log: -------------------------------------------------
*** Unhandled DHCP Option in OFFER/ACK: 28 *** Unhandled DHCP Option in OFFER/ACK: 28 DHCP client bound to address 172.16.1.147 U8500 $ setenv serverip 172.16.1.3 setenv serverip 172.16.1.3 U8500 $ tftp 0x01000000 tmp/snowball-C5j5W0/tmpI6oxzN-uImage tftp 0x01000000 tmp/snowball-C5j5W0/tmpI6oxzN-uImage smc911x: detected LAN9221 controller smc911x: phy initialized smc911x: MAC 08:00:08:1e:0f:44 Using smc911x-0 device TFTP from server 172.16.1.3; our IP address is 172.16.1.147 Filename 'tmp/snowball-C5j5W0/tmpI6oxzN-uImage'. Load address: 0x1000000 Loading: *T ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ###### done Bytes transferred = 4847725 (49f86d hex) U8500 $ printenv bootargs printenv bootargs bootargs=console=ttyAMA2,115200 root=/dev/mmcblk0p4 rootwait rw debug earlyprintk U8500 $ bootm 0x01000000 bootm 0x01000000 ## Booting kernel from Legacy Image at 01000000 ... Image Name: Linux Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 4847661 Bytes = 4.6 MB Load Address: 00008000 Entry Point: 00008000 Loading Kernel Image ... OK OK
Starting kernel ...
~$off # PYBOOT: Exception: timeout
========================================================================
Board snowball-u8500_defconfig failure log: -------------------------------------------------
[ 3.539337] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.21.auto [ 3.551239] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.21.auto) status -22 [ 3.558563] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.570037] musb-ux500 musb-hdrc.21.auto: Error applying setting, reverse things back [ 3.578613] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.22.auto [ 3.590545] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.22.auto) status -22 [ 3.597869] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.609344] musb-hdrc musb-hdrc.22.auto: Error applying setting, reverse things back [ 3.617156] HS USB OTG: no transceiver configured [ 3.621887] musb-hdrc musb-hdrc.22.auto: musb_init_controller failed with status -517 [ 3.629730] platform musb-hdrc.22.auto: Driver musb-hdrc requests probe deferral [ 3.637634] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.22.auto [ 3.649566] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.22.auto) status -22 [ 3.656890] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.668365] musb-ux500 musb-hdrc.22.auto: Error applying setting, reverse things back [ 3.676940] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.23.auto [ 3.688873] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.23.auto) status -22 [ 3.696197] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.707672] musb-hdrc musb-hdrc.23.auto: Error applying setting, reverse things back [ 3.715484] HS USB OTG: no transceiver configured [ 3.720184] musb-hdrc musb-hdrc.23.auto: musb_init_controller failed with status -517 [ 3.728027] platform musb-hdrc.23.auto: Driver musb-hdrc requests probe deferral [ 3.735992] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.23.auto [ 3.747894] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.23.auto) status -22 [ 3.755218] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.766693] musb-ux500 musb-hdrc.23.auto: Error applying setting, reverse things back [ 3.775299] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.24.auto [ 3.787231] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.24.auto) status -22 [ 3.794555] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.806030] musb-hdrc musb-hdrc.24.auto: Error applying setting, reverse things back [ 3.813842] HS USB OTG: no transceiver configured [ 3.818542] musb-hdrc musb-hdrc.24.auto: musb_init_controller failed with status -517 [ 3.826385] platform musb-hdrc.24.auto: Driver musb-hdrc requests probe deferral [ 3.834320] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.24.auto [ 3.846252] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.24.auto) status -22 [ 3.853576] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.865051] musb-ux500 musb-hdrc.24.auto: Error applying setting, reverse things back [ 3.873626] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.25.auto ~$off # PYBOOT: Exception: timeout
========================================================================
Board trimslice-multi_v7_defconfig failure log: -------------------------------------------------
[ 1.516838] ALSA pcmC0D0p,0:: cannot preallocate for size 32768 [ 1.522789] ALSA pcmC0D0c,0:: cannot preallocate for size 32768 [ 1.528724] tegra-snd-trimslice sound: tlv320aic23-hifi <-> 70002800.i2s mapping ok [ 1.537906] TCP: cubic registered [ 1.541249] NET: Registered protocol family 17 [ 1.545717] can: controller area network core (rev 20120528 abi 9) [ 1.551949] NET: Registered protocol family 29 [ 1.556406] can: raw protocol (rev 20120528) [ 1.560676] can: broadcast manager protocol (rev 20120528 t) [ 1.566336] can: netlink gateway (rev 20130117) max_hops=1 [ 1.572098] Key type dns_resolver registered [ 1.576603] ThumbEE CPU extension supported. [ 1.580887] Registering SWP/SWPB emulation handler [ 1.586597] usb1_vbus: 5000 mV [ 1.590277] platform c5000000.usb: Driver tegra-ehci requests probe deferral [ 1.615263] tegra-ehci c5004000.usb: EHCI Host Controller [ 1.620676] tegra-ehci c5004000.usb: new USB bus registered, assigned bus number 1 [ 1.628289] tegra-ehci c5004000.usb: can't setup: -12 [ 1.633339] tegra-ehci c5004000.usb: USB bus 1 deregistered [ 1.638909] tegra-ehci c5004000.usb: Failed to add USB HCD [ 1.644399] tegra-ehci: probe of c5004000.usb failed with error -12 [ 1.653709] tegra-ehci c5008000.usb: EHCI Host Controller [ 1.659120] tegra-ehci c5008000.usb: new USB bus registered, assigned bus number 1 [ 1.666698] tegra-ehci c5008000.usb: can't setup: -12 [ 1.671748] tegra-ehci c5008000.usb: USB bus 1 deregistered [ 1.677319] tegra-ehci c5008000.usb: Failed to add USB HCD [ 1.682810] tegra-ehci: probe of c5008000.usb failed with error -12 [ 1.693492] tegra-ehci c5000000.usb: EHCI Host Controller [ 1.698903] tegra-ehci c5000000.usb: new USB bus registered, assigned bus number 1 [ 1.706480] tegra-ehci c5000000.usb: can't setup: -12 [ 1.711530] tegra-ehci c5000000.usb: USB bus 1 deregistered [ 1.717106] tegra-ehci c5000000.usb: Failed to add USB HCD [ 1.722598] tegra-ehci: probe of c5000000.usb failed with error -12 [ 1.731193] input: gpio-keys as /devices/soc0/gpio-keys/input/input0 [ 1.738238] rtc-em3027 2-0056: setting system clock to 2014-05-27 10:00:56 UTC (1401184856) [ 1.751081] ALSA device list: [ 1.754047] #0: tegra-trimslice [ 1.758033] Waiting for root device /dev/sda1... ~$off # PYBOOT: Exception: timeout
========================================================================
Board trimslice-tegra_defconfig failure log: -------------------------------------------------
[ 1.791111] NET: Registered protocol family 15 [ 1.795556] can: controller area network core (rev 20120528 abi 9) [ 1.802047] NET: Registered protocol family 29 [ 1.806498] can: raw protocol (rev 20120528) [ 1.810788] can: broadcast manager protocol (rev 20120528 t) [ 1.816474] can: netlink gateway (rev 20130117) max_hops=1 [ 1.822224] Bluetooth: RFCOMM socket layer initialized [ 1.827379] Bluetooth: RFCOMM ver 1.11 [ 1.831260] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 1.836590] Bluetooth: BNEP socket layer initialized [ 1.841574] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 1.847509] Bluetooth: HIDP socket layer initialized [ 1.853861] Registering SWP/SWPB emulation handler [ 1.861553] usb1_vbus: 5000 mV [ 1.865293] platform c5000000.usb: Driver tegra-ehci requests probe deferral [ 1.908330] tegra-ehci c5004000.usb: EHCI Host Controller [ 1.913789] tegra-ehci c5004000.usb: new USB bus registered, assigned bus number 1 [ 1.921498] tegra-ehci c5004000.usb: can't setup: -12 [ 1.926549] tegra-ehci c5004000.usb: USB bus 1 deregistered [ 1.932149] tegra-ehci c5004000.usb: Failed to add USB HCD [ 1.937654] tegra-ehci: probe of c5004000.usb failed with error -12 [ 1.946885] tegra-ehci c5008000.usb: EHCI Host Controller [ 1.952398] tegra-ehci c5008000.usb: new USB bus registered, assigned bus number 1 [ 1.960033] tegra-ehci c5008000.usb: can't setup: -12 [ 1.965082] tegra-ehci c5008000.usb: USB bus 1 deregistered [ 1.970678] tegra-ehci c5008000.usb: Failed to add USB HCD [ 1.976182] tegra-ehci: probe of c5008000.usb failed with error -12 [ 1.986825] tegra-ehci c5000000.usb: EHCI Host Controller [ 1.992295] tegra-ehci c5000000.usb: new USB bus registered, assigned bus number 1 [ 1.999928] tegra-ehci c5000000.usb: can't setup: -12 [ 2.004977] tegra-ehci c5000000.usb: USB bus 1 deregistered [ 2.010571] tegra-ehci c5000000.usb: Failed to add USB HCD [ 2.016075] tegra-ehci: probe of c5000000.usb failed with error -12 [ 2.023976] input: gpio-keys as /devices/soc0/gpio-keys/input/input0 [ 2.031759] rtc-em3027 2-0056: setting system clock to 2014-05-27 09:59:05 UTC (1401184745) [ 2.051765] ALSA device list: [ 2.054732] #0: tegra-trimslice [ 2.058740] Waiting for root device /dev/sda1... ~$off # PYBOOT: Exception: timeout
========================================================================
Board wandboard-imx_v6_v7_defconfig failure log: -------------------------------------------------
[<80012660>] (show_stack) from [<80676390>] (dump_stack+0x8c/0xa4) [<80676304>] (dump_stack) from [<8001564c>] (handle_IPI+0x14c/0x178) r6:80904e1c r5:80910d2c r4:00000001 r3:80921360 [<80015500>] (handle_IPI) from [<800086fc>] (gic_handle_irq+0x60/0x68) r8:00000000 r7:f4000100 r6:ed0aff68 r5:80910e9c r4:f400010c r3:01400000 [<8000869c>] (gic_handle_irq) from [<800131e4>] (__irq_svc+0x44/0x5c) Exception stack(0xed0aff68 to 0xed0affb0) ff60: 8000f750 ed0aff78 00000000 00000000 ed0ae000 8091098c ff80: 80910938 8096d083 00000000 ed0ae000 80681664 ed0affbc ed0affa0 ed0affb0 ffa0: 80066034 8000f754 60000113 ffffffff r7:ed0aff9c r6:ffffffff r5:60000113 r4:8000f754 [<8000f72c>] (arch_cpu_idle) from [<80061a0c>] (cpu_startup_entry+0x114/0x180) [<800618f8>] (cpu_startup_entry) from [<80015294>] (secondary_start_kernel+0x144/0x164) r7:8096d598 [<80015150>] (secondary_start_kernel) from [<100087a4>] (0x100087a4) r5:00000015 r4:7d09406a CPU3: stopping CPU: 3 PID: 0 Comm: swapper/3 Tainted: G D 3.15.0-rc7-next-20140527 #1 Backtrace: [<80012394>] (dump_backtrace) from [<80012678>] (show_stack+0x18/0x1c) r6:8092d8d8 r5:8092d8d8 r4:00000000 r3:00000000 [<80012660>] (show_stack) from [<80676390>] (dump_stack+0x8c/0xa4) [<80676304>] (dump_stack) from [<8001564c>] (handle_IPI+0x14c/0x178) r6:80904e1c r5:80910d2c r4:00000003 r3:80921360 [<80015500>] (handle_IPI) from [<800086fc>] (gic_handle_irq+0x60/0x68) r8:00000000 r7:f4000100 r6:ed0b3f68 r5:80910e9c r4:f400010c r3:01400000 [<8000869c>] (gic_handle_irq) from [<800131e4>] (__irq_svc+0x44/0x5c) Exception stack(0xed0b3f68 to 0xed0b3fb0) 3f60: 8000f750 ed0b3f78 00000000 00000000 ed0b2000 8091098c 3f80: 80910938 8096d083 00000000 ed0b2000 80681664 ed0b3fbc ed0b3fa0 ed0b3fb0 3fa0: 80066034 8000f754 60000113 ffffffff r7:ed0b3f9c r6:ffffffff r5:60000113 r4:8000f754 [<8000f72c>] (arch_cpu_idle) from [<80061a0c>] (cpu_startup_entry+0x114/0x180) [<800618f8>] (cpu_startup_entry) from [<80015294>] (secondary_start_kernel+0x144/0x164) r7:8096d598 [<80015150>] (secondary_start_kernel) from [<100087a4>] (0x100087a4) r5:00000015 r4:7d09406a ---[ end Kernel panic - not syncing: Fatal exception in interrupt ~$off # PYBOOT: Exception: panic
========================================================================
Board wandboard-multi_v7_defconfig failure log: -------------------------------------------------
[ 2.250189] [<c02144ec>] (handle_IPI) from [<c0208934>] (gic_handle_irq+0x64/0x68) [ 2.257768] [<c0208934>] (gic_handle_irq) from [<c0212400>] (__irq_svc+0x40/0x50) [ 2.265253] Exception stack(0xc0b55f28 to 0xc0b55f70) [ 2.270312] 5f20: 00000000 c0b62354 c0b623a0 0000004c 83c1b325 00000000 [ 2.278496] 5f40: 83f50290 00000000 ea797c28 c0b52c20 00000001 ea797c2c 0000001b c0b55f70 [ 2.286677] 5f60: c0697e50 c0697e5c 60000013 ffffffff [ 2.291741] [<c0212400>] (__irq_svc) from [<c0697e5c>] (cpuidle_enter_state+0x68/0x100) [ 2.299756] [<c0697e5c>] (cpuidle_enter_state) from [<c027b49c>] (cpu_startup_entry+0x188/0x22c) [ 2.308553] [<c027b49c>] (cpu_startup_entry) from [<c0ab3b90>] (start_kernel+0x374/0x380) [ 2.316735] CPU2: stopping [ 2.319452] CPU: 2 PID: 0 Comm: swapper/2 Tainted: G D 3.15.0-rc7-next-20140527 #1 [ 2.327995] [<c0215cdc>] (unwind_backtrace) from [<c0211890>] (show_stack+0x10/0x14) [ 2.335751] [<c0211890>] (show_stack) from [<c07f88f0>] (dump_stack+0x88/0x98) [ 2.342982] [<c07f88f0>] (dump_stack) from [<c02144ec>] (handle_IPI+0x148/0x174) [ 2.350387] [<c02144ec>] (handle_IPI) from [<c0208934>] (gic_handle_irq+0x64/0x68) [ 2.357964] [<c0208934>] (gic_handle_irq) from [<c0212400>] (__irq_svc+0x40/0x50) [ 2.365449] Exception stack(0xe98a1f60 to 0xe98a1fa8) [ 2.370509] 1f60: 00000000 c0b62354 c0b62354 0000004c 83c21343 00000000 83f50244 00000000 [ 2.378692] 1f80: ea7a7c28 c0b52c20 00000000 00000000 0000001b e98a1fa8 c0697e50 c0697e5c [ 2.386871] 1fa0: 60000013 ffffffff [ 2.390372] [<c0212400>] (__irq_svc) from [<c0697e5c>] (cpuidle_enter_state+0x68/0x100) [ 2.398385] [<c0697e5c>] (cpuidle_enter_state) from [<c027b51c>] (cpu_startup_entry+0x208/0x22c) [ 2.407178] [<c027b51c>] (cpu_startup_entry) from [<10208a84>] (0x10208a84) [ 2.414144] CPU3: stopping [ 2.416860] CPU: 3 PID: 0 Comm: swapper/3 Tainted: G D 3.15.0-rc7-next-20140527 #1 [ 2.425405] [<c0215cdc>] (unwind_backtrace) from [<c0211890>] (show_stack+0x10/0x14) [ 2.433161] [<c0211890>] (show_stack) from [<c07f88f0>] (dump_stack+0x88/0x98) [ 2.440394] [<c07f88f0>] (dump_stack) from [<c02144ec>] (handle_IPI+0x148/0x174) [ 2.447798] [<c02144ec>] (handle_IPI) from [<c0208934>] (gic_handle_irq+0x64/0x68) [ 2.455376] [<c0208934>] (gic_handle_irq) from [<c0212400>] (__irq_svc+0x40/0x50) [ 2.462861] Exception stack(0xe98a3f60 to 0xe98a3fa8) [ 2.467920] 3f60: 00000000 c0b62354 c0b623a0 0000004c 83ba9c84 00000000 83f5051b 00000000 [ 2.476104] 3f80: ea7afc28 c0b52c20 00000001 ea7afc2c 0000001b e98a3fa8 c0697e50 c0697e5c [ 2.484284] 3fa0: 60000013 ffffffff [ 2.487784] [<c0212400>] (__irq_svc) from [<c0697e5c>] (cpuidle_enter_state+0x68/0x100) [ 2.495798] [<c0697e5c>] (cpuidle_enter_state) from [<c027b49c>] (cpu_startup_entry+0x188/0x22c) [ 2.504590] [<c027b49c>] (cpu_startup_entry) from [<10208a84>] (0x10208a84) [ 2.511559] ---[ end Kernel panic - not syncing: Fatal exception in interrupt ~$off # PYBOOT: Exception: panic