stable-rc boot: 53 passed 17 failed (stable-rc/v4.4.31-36-g033ef9b)

Full logs are available at http://arm-soc.lixom.net/bootlogs/stable-rc/v4.4.31-36-g033ef9b/

Failed boards:

arndale arm-multi_v7_nosmp_defconfig : FAILED 2:21.06 bbb arm-omap2plus_defconfig : FAILED 1:57.58 bbb arm-multi_v7_defconfig : FAILED 1:54.91 bbb arm-multi_v7_nosmp_defconfig : FAILED 2:52.18 beagleboard-x15 arm-omap2plus_defconfig : FAILED 1:44.61 beagleboard-x15 arm-multi_lpae_defconfig : FAILED 3:44.45 beagleboard-x15 arm-multi_v7_nosmp_defconfig : FAILED 1:46.66 beaver arm-tegra_defconfig : FAILED 1:46.89 beaver arm-multi_v7_defconfig : FAILED 1:57.30 beaver arm-multi_v7_nosmp_defconfig : FAILED 2:00.74 colombus arm-multi_v7_nosmp_defconfig : FAILED 3:20.48 jetsontx1 arm64-defconfig : NO DTB jetsontx1 arm64-nosmp_defconfig : NO DTB odroidu3 arm-exynos_defconfig : FAILED 2:12.26 odroidu3 arm-multi_v7_defconfig : FAILED 2:58.96 seaboard arm-tegra_defconfig : FAILED 1:48.89 seaboard arm-multi_v7_defconfig : FAILED 2:23.91 seaboard arm-multi_v7_nosmp_defconfig : FAILED 2:14.18 snowball arm-multi_v7_nosmp_defconfig : FAILED 3:12.40

Successful boards:

apc arm-vt8500_v6_v7_defconfig : passed 1:22.67 arndale arm-exynos_defconfig : warnings 1:32.99 arndale arm-multi_v7_defconfig : passed 1:22.75 arndale arm-multi_lpae_defconfig : passed 3:29.29 capri arm-multi_v7_defconfig : passed 0:54.78 capri arm-multi_v7_nosmp_defconfig : warnings 1:05.09 chitra powerpc-pasemi_defconfig : passed 2:09.10 chitra powerpc-ppc64_defconfig : passed 3:53.03 colombus arm-sunxi_defconfig : passed 2:07.58 colombus arm-multi_v7_defconfig : passed 3:20.57 colombus arm-multi_lpae_defconfig : passed 2:14.42 cosmic arm-imx_v6_v7_defconfig : passed 3:23.32 cosmic arm-multi_v7_defconfig : passed 3:09.53 cosmic arm-multi_v7_nosmp_defconfig : passed 2:44.12 cubie arm-sunxi_defconfig : passed 1:00.65 cubie arm-multi_v7_defconfig : passed 1:03.51 cubie arm-multi_v7_nosmp_defconfig : passed 1:11.71 cubie2 arm-sunxi_defconfig : passed 0:52.00 cubie2 arm-multi_v7_defconfig : passed 0:57.66 cubie2 arm-multi_lpae_defconfig : passed 1:02.51 cubie2 arm-multi_v7_nosmp_defconfig : warnings 2:02.44 cubox arm-multi_v7_defconfig : passed 1:13.41 cubox arm-mvebu_v7_defconfig : passed 1:46.63 cubox arm-multi_v7_nosmp_defconfig : passed 2:11.38 jetsontk1 arm-tegra_defconfig : passed 1:34.72 jetsontk1 arm-multi_v7_defconfig : passed 1:42.58 jetsontk1 arm-multi_lpae_defconfig : passed 2:21.73 jetsontk1 arm-multi_v7_nosmp_defconfig : warnings 1:31.72 minnowmax x86-minnowmax_defconfig : passed 2:12.14 omap5uevm arm-omap2plus_defconfig : passed 1:06.59 omap5uevm arm-multi_v7_defconfig : passed 1:13.58 omap5uevm arm-multi_lpae_defconfig : passed 1:25.05 omap5uevm arm-multi_v7_nosmp_defconfig : warnings 2:36.19 pandaes arm-omap2plus_defconfig : warnings 1:46.06 pandaes arm-multi_v7_defconfig : passed 2:03.99 pandaes arm-multi_v7_nosmp_defconfig : warnings 2:05.81 parallella arm-multi_v7_defconfig : passed 3:09.45 parallella arm-multi_v7_nosmp_defconfig : warnings 2:51.71 pi arm-exynos_defconfig : passed 1:29.02 pi arm-multi_v7_defconfig : passed 1:47.10 pi arm-multi_lpae_defconfig : passed 1:54.83 pit arm-exynos_defconfig : passed 1:34.59 pit arm-multi_v7_defconfig : passed 1:48.47 pit arm-multi_lpae_defconfig : passed 3:02.44 pit arm-multi_v7_nosmp_defconfig : warnings 1:44.29 seattle arm64-defconfig : passed 3:16.58 seattle arm64-nosmp_defconfig : passed 2:07.81 trimslice arm-tegra_defconfig : passed 2:56.15 trimslice arm-multi_v7_defconfig : passed 3:07.33 trimslice arm-multi_v7_nosmp_defconfig : warnings 1:31.11 wandboard arm-imx_v6_v7_defconfig : passed 1:14.53 wandboard arm-multi_v7_defconfig : passed 1:20.24 wandboard arm-multi_v7_nosmp_defconfig : warnings 2:11.07

Offline boards:

beagleboard-x15 arm-multi_v7_defconfig : OFFLINE 2:17.70 colibri-vf61 arm-imx_v6_v7_defconfig : OFFLINE 1:17.30 colibri-vf61 arm-multi_v7_defconfig : OFFLINE 1:21.77 colibri-vf61 arm-multi_v7_nosmp_defconfig : OFFLINE 1:39.60 dalmore arm-tegra_defconfig : OFFLINE 2:18.50 dalmore arm-multi_v7_defconfig : OFFLINE 3:01.00 dalmore arm-multi_lpae_defconfig : OFFLINE 2:43.53 dalmore arm-multi_v7_nosmp_defconfig : OFFLINE 2:17.13 hummingboard arm-imx_v6_v7_defconfig : OFFLINE 3:24.15 hummingboard arm-multi_v7_defconfig : OFFLINE 2:25.70 hummingboard arm-multi_v7_nosmp_defconfig : OFFLINE 2:12.62 pi arm-multi_v7_nosmp_defconfig : OFFLINE 3:00.20 rk3288evb arm-multi_v7_defconfig : OFFLINE 1:51.48 rk3288evb arm-multi_lpae_defconfig : OFFLINE 0:52.14 rk3288evb arm-multi_v7_nosmp_defconfig : OFFLINE 0:45.20 sama5 arm-sama5_defconfig : OFFLINE 2:15.97 sama5d3-xplained arm-sama5_defconfig : OFFLINE 3:26.03 snow arm-exynos_defconfig : OFFLINE 2:57.50 snow arm-multi_v7_defconfig : OFFLINE 2:38.88 snow arm-multi_lpae_defconfig : OFFLINE 2:14.58 snow arm-multi_v7_nosmp_defconfig : OFFLINE 2:13.47 snowball arm-u8500_defconfig : OFFLINE 2:29.39 snowball arm-multi_v7_defconfig : OFFLINE 4:08.18 socfpga arm-socfpga_defconfig : OFFLINE 2:34.03 socfpga arm-multi_v7_defconfig : OFFLINE 3:21.80 socfpga arm-multi_v7_nosmp_defconfig : OFFLINE 2:16.92

Board legend is available at http://arm-soc.lixom.net/boards.html

Last entries of failed logs below:

========================================================================

Board arndale-arm-multi_v7_nosmp_defconfig failure log: -------------------------------------------------

[ 2.101552] dwmmc_exynos 12220000.mmc: Version ID is 241a [ 2.106932] dwmmc_exynos 12220000.mmc: DW MMC controller at irq 102,32 bit host data width,128 deep fifo [ 2.116416] dwmmc_exynos 12220000.mmc: No vqmmc regulator found [ 2.149263] dwmmc_exynos 12220000.mmc: 1 slots initialized [ 2.153766] sdhci-pltfm: SDHCI platform and OF driver helper [ 2.159996] ledtrig-cpu: registered to indicate activity on CPUs [ 2.165012] usbcore: registered new interface driver usbhid [ 2.170454] usbhid: USB HID core driver [ 2.176570] NET: Registered protocol family 10 [ 2.179955] sit: IPv6 over IPv4 tunneling driver [ 2.184439] NET: Registered protocol family 17 [ 2.188563] can: controller area network core (rev 20120528 abi 9) [ 2.194754] NET: Registered protocol family 29 [ 2.199151] can: raw protocol (rev 20120528) [ 2.203410] can: broadcast manager protocol (rev 20120528 t) [ 2.209053] can: netlink gateway (rev 20130117) max_hops=1 [ 2.214713] Key type dns_resolver registered [ 2.219033] ThumbEE CPU extension supported. [ 2.224027] ahci 122f0000.sata: couldn't get PHY in node sata: -517 [ 2.230485] input: gpio_keys as /devices/platform/gpio_keys/input/input0 [ 2.236126] hctosys: unable to open rtc device (rtc0) [ 2.244583] MAIN_DC: disabling [ 2.246155] hdmi-en: disabling [ 2.249576] ahci 122f0000.sata: couldn't get PHY in node sata: -517 [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 4.4.32-rc1-00036-g033ef9b (build@brutus) (gcc version 4.9.2 (GCC) ) #1 Mon Nov 14 08:18:24 PST 2016 [ 0.000000] CPU: ARMv7 Processor [410fc0f4] revision 4 (ARMv7), cr=10c53c7d [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache [ 0.000000] Machine model: Insignal Arndale evaluation board based on EXYNOS5250 [ 0.000000] cma: Reserved 64 MiB at 0xbc000000 [ 0.000000] Memory policy: Data cache writeback [ 0.000000] Samsung CPU ID: 0x43520010 [ 0.000000] On node 0 totalpages: 520192

[PYBOOT] [arndale 02:18]: Timed out waiting for "<type 'str'>":

[PYBOOT] [arndale 02:19]: got exception: timeout ~$off

[PYBOOT] [arndale 02:20]: Done.

========================================================================

Board bbb-arm-multi_v7_defconfig failure log: -------------------------------------------------

[ 1.534548] omap_hsmmc 48060000.mmc: Got CD GPIO [ 1.601016] Synopsys Designware Multimedia Card Interface Driver [ 1.608811] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.618413] ledtrig-cpu: registered to indicate activity on CPUs [ 1.625241] usbcore: registered new interface driver usbhid [ 1.631142] usbhid: USB HID core driver [ 1.641834] NET: Registered protocol family 10 [ 1.648324] sit: IPv6 over IPv4 tunneling driver [ 1.654480] NET: Registered protocol family 17 [ 1.659244] can: controller area network core (rev 20120528 abi 9) [ 1.665885] NET: Registered protocol family 29 [ 1.670607] can: raw protocol (rev 20120528) [ 1.675129] can: broadcast manager protocol (rev 20120528 t) [ 1.681121] can: netlink gateway (rev 20130117) max_hops=1 [ 1.687806] Key type dns_resolver registered [ 1.692677] omap_voltage_late_init: Voltage driver support not added [ 1.700823] ThumbEE CPU extension supported. [ 1.705433] Registering SWP/SWPB emulation handler [ 1.719383] at24 0-0050: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.727140] omap_i2c 44e0b000.i2c: bus 0 rev0.11 at 400 kHz [ 1.735529] at24 2-0054: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.743191] at24 2-0055: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.750790] at24 2-0056: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.758348] at24 2-0057: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.765669] omap_i2c 4819c000.i2c: bus 2 rev0.11 at 100 kHz [ 1.773838] hctosys: unable to open rtc device (rtc0) [ 1.787596] Waiting for root device /dev/mmcblk1p2... [ 1.823036] mmc1: MAN_BKOPS_EN bit is not set [ 1.829555] mmc1: new high speed MMC card at address 0001 [ 1.836225] mmcblk0: mmc1:0001 MMC02G 1.79 GiB [ 1.841432] mmcblk0boot0: mmc1:0001 MMC02G partition 1 1.00 MiB [ 1.848023] mmcblk0boot1: mmc1:0001 MMC02G partition 2 1.00 MiB [ 1.856526] mmcblk0: p1 p2

[PYBOOT] [bbb 01:52]: Timed out waiting for "<type 'str'>":

[PYBOOT] [bbb 01:53]: got exception: timeout ~$off

[PYBOOT] [bbb 01:54]: Done.

========================================================================

Board bbb-arm-multi_v7_nosmp_defconfig failure log: -------------------------------------------------

[ 1.350449] sdhci: Copyright(c) Pierre Ossman [ 1.356194] omap_hsmmc 48060000.mmc: Got CD GPIO [ 1.419426] Synopsys Designware Multimedia Card Interface Driver [ 1.426931] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.435987] ledtrig-cpu: registered to indicate activity on CPUs [ 1.442696] usbcore: registered new interface driver usbhid [ 1.448573] usbhid: USB HID core driver [ 1.457879] NET: Registered protocol family 10 [ 1.464371] sit: IPv6 over IPv4 tunneling driver [ 1.470313] NET: Registered protocol family 17 [ 1.475049] can: controller area network core (rev 20120528 abi 9) [ 1.481640] NET: Registered protocol family 29 [ 1.486337] can: raw protocol (rev 20120528) [ 1.490851] can: broadcast manager protocol (rev 20120528 t) [ 1.496829] can: netlink gateway (rev 20130117) max_hops=1 [ 1.503436] Key type dns_resolver registered [ 1.508213] omap_voltage_late_init: Voltage driver support not added [ 1.516053] ThumbEE CPU extension supported. [ 1.528389] at24 0-0050: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.535955] omap_i2c 44e0b000.i2c: bus 0 rev0.11 at 400 kHz [ 1.543727] at24 2-0054: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.551254] at24 2-0055: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.558743] at24 2-0056: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.566219] at24 2-0057: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.573493] omap_i2c 4819c000.i2c: bus 2 rev0.11 at 100 kHz [ 1.581095] hctosys: unable to open rtc device (rtc0) [ 1.592017] Waiting for root device /dev/mmcblk1p2... [ 1.626531] mmc1: MAN_BKOPS_EN bit is not set [ 1.632917] mmc1: new high speed MMC card at address 0001 [ 1.639371] mmcblk0: mmc1:0001 MMC02G 1.79 GiB [ 1.644444] mmcblk0boot0: mmc1:0001 MMC02G partition 1 1.00 MiB [ 1.650914] mmcblk0boot1: mmc1:0001 MMC02G partition 2 1.00 MiB [ 1.659151] mmcblk0: p1 p2

[PYBOOT] [bbb 02:49]: Timed out waiting for "<type 'str'>":

[PYBOOT] [bbb 02:50]: got exception: timeout ~$off

[PYBOOT] [bbb 02:51]: Done.

========================================================================

Board bbb-arm-omap2plus_defconfig failure log: -------------------------------------------------

[ 2.062626] omap_hsmmc 481d8000.mmc: GPIO lookup for consumer wp [ 2.068951] omap_hsmmc 481d8000.mmc: using device tree for GPIO lookup [ 2.075824] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@481d8000[0]' [ 2.085414] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@481d8000[0]' [ 2.094910] omap_hsmmc 481d8000.mmc: using lookup tables for GPIO lookup [ 2.101925] omap_hsmmc 481d8000.mmc: lookup for GPIO wp failed [ 2.145522] ledtrig-cpu: registered to indicate activity on CPUs [ 2.153688] oprofile: using arm/armv7 [ 2.158881] Initializing XFRM netlink socket [ 2.163955] NET: Registered protocol family 10 [ 2.174409] sit: IPv6 over IPv4 tunneling driver [ 2.183185] NET: Registered protocol family 17 [ 2.188110] NET: Registered protocol family 15 [ 2.193373] Key type dns_resolver registered [ 2.198311] omap_voltage_late_init: Voltage driver support not added [ 2.205044] sr_dev_init: No voltage domain specified for smartreflex0. Cannot initialize [ 2.213507] sr_dev_init: No voltage domain specified for smartreflex1. Cannot initialize [ 2.223776] ThumbEE CPU extension supported. [ 2.228425] Registering SWP/SWPB emulation handler [ 2.233461] SmartReflex Class3 initialized [ 2.290286] mmc1: MAN_BKOPS_EN bit is not set [ 2.300205] mmc1: new high speed MMC card at address 0001 [ 2.311809] mmcblk0: mmc1:0001 MMC02G 1.79 GiB [ 2.322162] mmcblk0boot0: mmc1:0001 MMC02G partition 1 1.00 MiB [ 2.332885] mmcblk0boot1: mmc1:0001 MMC02G partition 2 1.00 MiB [ 2.348777] mmcblk0: p1 p2 [ 2.371888] tps65217 0-0024: TPS65217 ID 0xe version 1.2 [ 2.379246] omap_i2c 44e0b000.i2c: bus 0 rev0.11 at 400 kHz [ 2.391864] omap_i2c 4819c000.i2c: bus 2 rev0.11 at 100 kHz [ 2.400187] hctosys: unable to open rtc device (rtc0) [ 2.405626] sr_init: No PMIC hook to init smartreflex [ 2.411284] sr_init: platform driver register failed for SR [ 2.456269] Waiting for root device /dev/mmcblk1p2...

[PYBOOT] [bbb 01:54]: Timed out waiting for "<type 'str'>":

[PYBOOT] [bbb 01:55]: got exception: timeout ~$off

[PYBOOT] [bbb 01:57]: Done.

========================================================================

Board beagleboard-x15-arm-multi_lpae_defconfig failure log: -------------------------------------------------

[ 1.571467] NET: Registered protocol family 10 [ 1.576721] sit: IPv6 over IPv4 tunneling driver [ 1.581995] NET: Registered protocol family 17 [ 1.586652] can: controller area network core (rev 20120528 abi 9) [ 1.593155] NET: Registered protocol family 29 [ 1.597816] can: raw protocol (rev 20120528) [ 1.602291] can: broadcast manager protocol (rev 20120528 t) [ 1.608215] can: netlink gateway (rev 20130117) max_hops=1 [ 1.614244] Key type dns_resolver registered [ 1.618796] omap_voltage_late_init: Voltage driver support not added [ 1.625936] Power Management for TI OMAP4+ devices. [ 1.631240] ThumbEE CPU extension supported. [ 1.635729] Registering SWP/SWPB emulation handler [ 1.642555] palmas 0-0058: Irq flag is 0x00000008 [ 1.667184] palmas 0-0058: Muxing GPIO 2f, PWM 0, LED 0 [ 1.698788] palmas-rtc 48070000.i2c:tps659038@58:tps659038_rtc: rtc core: registered 48070000.i2c:tps659 as rtc1 [ 1.712928] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 1.735470] rtc-ds1307 2-006f: SET TIME! [ 1.741205] rtc-ds1307 2-006f: rtc core: registered mcp7941x as rtc0 [ 1.747965] rtc-ds1307 2-006f: 64 bytes nvram [ 1.752567] omap_i2c 48060000.i2c: bus 2 rev0.12 at 400 kHz [ 1.761390] omap_hsmmc 4809c000.mmc: Got CD GPIO [ 1.795955] vdd_3v3: supplied by regen1 [ 1.836889] rtc-ds1307 2-006f: setting system clock to 2001-01-01 00:00:00 UTC (978307200) [ 1.854005] aic_dvdd_fixed: disabling [ 1.858017] ldousb: disabling [ 1.862058] Waiting for root device /dev/mmcblk1p1... [ 1.869559] mmc1: MAN_BKOPS_EN bit is not set [ 1.881584] mmc1: new high speed MMC card at address 0001 [ 1.887565] mmcblk0: mmc1:0001 S10004 3.56 GiB [ 1.892456] mmcblk0boot0: mmc1:0001 S10004 partition 1 4.00 MiB [ 1.898809] mmcblk0boot1: mmc1:0001 S10004 partition 2 4.00 MiB [ 1.905668] mmcblk0: p1

[PYBOOT] [beagleboard-x15 03:41]: Timed out waiting for "<type 'str'>":

[PYBOOT] [beagleboard-x15 03:42]: got exception: timeout ~$off

[PYBOOT] [beagleboard-x15 03:43]: Done.

========================================================================

Board beagleboard-x15-arm-multi_v7_nosmp_defconfig failure log: -------------------------------------------------

[ 1.455632] NET: Registered protocol family 10 [ 1.460880] sit: IPv6 over IPv4 tunneling driver [ 1.466052] NET: Registered protocol family 17 [ 1.470711] can: controller area network core (rev 20120528 abi 9) [ 1.477210] NET: Registered protocol family 29 [ 1.481868] can: raw protocol (rev 20120528) [ 1.486346] can: broadcast manager protocol (rev 20120528 t) [ 1.492280] can: netlink gateway (rev 20130117) max_hops=1 [ 1.498241] Key type dns_resolver registered [ 1.502790] omap_voltage_late_init: Voltage driver support not added [ 1.509718] Power Management for TI OMAP4+ devices. [ 1.514987] ThumbEE CPU extension supported. [ 1.519562] ata1: SATA link down (SStatus 0 SControl 300) [ 1.526490] palmas 0-0058: Irq flag is 0x00000008 [ 1.551281] palmas 0-0058: Muxing GPIO 2f, PWM 0, LED 0 [ 1.579381] palmas-rtc 48070000.i2c:tps659038@58:tps659038_rtc: rtc core: registered 48070000.i2c:tps659 as rtc1 [ 1.592683] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 1.614844] rtc-ds1307 2-006f: SET TIME! [ 1.620466] rtc-ds1307 2-006f: rtc core: registered mcp7941x as rtc0 [ 1.627164] rtc-ds1307 2-006f: 64 bytes nvram [ 1.631753] omap_i2c 48060000.i2c: bus 2 rev0.12 at 400 kHz [ 1.639548] omap_hsmmc 4809c000.mmc: Got CD GPIO [ 1.675045] vdd_3v3: supplied by regen1 [ 1.710194] rtc-ds1307 2-006f: setting system clock to 2001-01-01 00:00:00 UTC (978307200) [ 1.722651] aic_dvdd_fixed: disabling [ 1.726649] ldousb: disabling [ 1.730448] Waiting for root device /dev/mmcblk1p1... [ 1.768958] mmc1: MAN_BKOPS_EN bit is not set [ 1.780940] mmc1: new high speed MMC card at address 0001 [ 1.786815] mmcblk0: mmc1:0001 S10004 3.56 GiB [ 1.791645] mmcblk0boot0: mmc1:0001 S10004 partition 1 4.00 MiB [ 1.797932] mmcblk0boot1: mmc1:0001 S10004 partition 2 4.00 MiB [ 1.804670] mmcblk0: p1

[PYBOOT] [beagleboard-x15 01:44]: Timed out waiting for "<type 'str'>":

[PYBOOT] [beagleboard-x15 01:45]: got exception: timeout ~$off

[PYBOOT] [beagleboard-x15 01:46]: Done.

========================================================================

Board beagleboard-x15-arm-omap2plus_defconfig failure log: -------------------------------------------------

[ 2.179937] of_get_named_gpiod_flags: parsed 'cd-gpios' property of node '/ocp/mmc@4809c000[0]' - status (0) [ 2.190293] omap_hsmmc 4809c000.mmc: Got CD GPIO [ 2.195156] omap_hsmmc 4809c000.mmc: GPIO lookup for consumer wp [ 2.201448] omap_hsmmc 4809c000.mmc: using device tree for GPIO lookup [ 2.208303] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@4809c000[0]' [ 2.217895] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@4809c000[0]' [ 2.227395] omap_hsmmc 4809c000.mmc: using lookup tables for GPIO lookup [ 2.234436] omap_hsmmc 4809c000.mmc: lookup for GPIO wp failed [ 2.282813] omap_hsmmc 480b4000.mmc: GPIO lookup for consumer cd [ 2.289143] omap_hsmmc 480b4000.mmc: using device tree for GPIO lookup [ 2.296026] of_get_named_gpiod_flags: can't parse 'cd-gpios' property of node '/ocp/mmc@480b4000[0]' [ 2.305654] of_get_named_gpiod_flags: can't parse 'cd-gpio' property of node '/ocp/mmc@480b4000[0]' [ 2.315180] omap_hsmmc 480b4000.mmc: using lookup tables for GPIO lookup [ 2.322251] omap_hsmmc 480b4000.mmc: lookup for GPIO cd failed [ 2.328400] omap_hsmmc 480b4000.mmc: GPIO lookup for consumer wp [ 2.334747] omap_hsmmc 480b4000.mmc: using device tree for GPIO lookup [ 2.341623] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@480b4000[0]' [ 2.351249] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@480b4000[0]' [ 2.360785] omap_hsmmc 480b4000.mmc: using lookup tables for GPIO lookup [ 2.367861] omap_hsmmc 480b4000.mmc: lookup for GPIO wp failed [ 2.374523] vdd_3v3: supplied by regen1 [ 2.412941] hctosys: unable to open rtc device (rtc0) [ 2.418251] sr_init: No PMIC hook to init smartreflex [ 2.423799] sr_init: platform driver register failed for SR [ 2.466955] mmc1: MAN_BKOPS_EN bit is not set [ 2.475824] aic_dvdd_fixed: disabling [ 2.480040] ldousb: disabling [ 2.483334] mmc1: new high speed MMC card at address 0001 [ 2.490939] mmcblk0: mmc1:0001 S10004 3.56 GiB [ 2.496458] mmcblk0boot0: mmc1:0001 S10004 partition 1 4.00 MiB [ 2.503422] mmcblk0boot1: mmc1:0001 S10004 partition 2 4.00 MiB [ 2.511835] mmcblk0: p1 [ 2.519010] Waiting for root device /dev/mmcblk1p1...

[PYBOOT] [beagleboard-x15 01:42]: Timed out waiting for "<type 'str'>":

[PYBOOT] [beagleboard-x15 01:43]: got exception: timeout ~$off

[PYBOOT] [beagleboard-x15 01:44]: Done.

========================================================================

Board beaver-arm-multi_v7_defconfig failure log: -------------------------------------------------

[ 3.183332] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 3.188916] r8169 0000:01:00.0: enabling device (0140 -> 0143) [ 3.196022] r8169 0000:01:00.0 eth0: RTL8168evl/8111evl at 0xf08d6000, 02:04:4b:01:60:99, XID 0c900800 IRQ 375 [ 3.206022] r8169 0000:01:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko] [ 3.215335] +VDD_5V_HDMI: supplied by sys_3v3,vdd_3v3_alw [ 3.220823] vdd_1v8_gen: supplied by vdd_5v_in [ 3.227820] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 3.234443] [drm] No driver support for vblank timestamp query. [ 3.240387] drm drm: No connectors reported connected with modes [ 3.246394] [drm] Cannot find any crtc or sizes - going 1024x768 [ 3.271775] Console: switching to colour frame buffer device 128x48 [ 3.283832] drm drm: fb0: frame buffer device [ 3.303272] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 3.311717] usb3_vbus: supplied by vdd_5v_in [ 3.318087] utmi_phy_clk_enable: timeout waiting for phy to stabilize [ 3.324555] tegra-ehci 7d004000.usb: EHCI Host Controller [ 3.329965] tegra-ehci 7d004000.usb: new USB bus registered, assigned bus number 1 [ 3.337790] tegra-ehci 7d004000.usb: irq 343, io mem 0x7d004000 [ 3.353281] tegra-ehci 7d004000.usb: USB 2.0 started, EHCI 1.00 [ 3.360137] hub 1-0:1.0: USB hub found [ 3.363919] hub 1-0:1.0: 1 port detected [ 3.368789] tegra-ehci 7d008000.usb: EHCI Host Controller [ 3.374206] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 2 [ 3.381974] tegra-ehci 7d008000.usb: irq 344, io mem 0x7d008000 [ 3.393275] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.00 [ 3.400035] hub 2-0:1.0: USB hub found [ 3.403810] hub 2-0:1.0: 1 port detected [ 3.412964] tps65910-rtc tps65910-rtc: setting system clock to 2000-01-01 00:00:02 UTC (946684802) [ 3.426831] vdd_sata,avdd_plle: disabling [ 3.431619] usb1_vbus: disabling [ 3.435662] Waiting for root device /dev/mmcblk1p1... [ 3.713280] usb 2-1: new high-speed USB device number 2 using tegra-ehci [ 4.651809] asix 2-1:1.0 eth1: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 58:6d:8f:50:ba:18

[PYBOOT] [beaver 01:54]: Timed out waiting for "<type 'str'>":

[PYBOOT] [beaver 01:55]: got exception: timeout ~$off

[PYBOOT] [beaver 01:56]: Done.

========================================================================

Board beaver-arm-multi_v7_nosmp_defconfig failure log: -------------------------------------------------

[ 3.157921] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 3.163504] r8169 0000:01:00.0: enabling device (0140 -> 0143) [ 3.170116] r8169 0000:01:00.0 eth0: RTL8168evl/8111evl at 0xf08d6000, 02:04:4b:01:60:99, XID 0c900800 IRQ 375 [ 3.180107] r8169 0000:01:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko] [ 3.189284] +VDD_5V_HDMI: supplied by sys_3v3,vdd_3v3_alw [ 3.194764] vdd_1v8_gen: supplied by vdd_5v_in [ 3.200367] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 3.206979] [drm] No driver support for vblank timestamp query. [ 3.212908] drm drm: No connectors reported connected with modes [ 3.218910] [drm] Cannot find any crtc or sizes - going 1024x768 [ 3.238182] Console: switching to colour frame buffer device 128x48 [ 3.249961] drm drm: fb0: frame buffer device [ 3.254397] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 3.262368] usb3_vbus: supplied by vdd_5v_in [ 3.268618] utmi_phy_clk_enable: timeout waiting for phy to stabilize [ 3.275062] tegra-ehci 7d004000.usb: EHCI Host Controller [ 3.280465] tegra-ehci 7d004000.usb: new USB bus registered, assigned bus number 1 [ 3.288180] tegra-ehci 7d004000.usb: irq 343, io mem 0x7d004000 [ 3.303010] tegra-ehci 7d004000.usb: USB 2.0 started, EHCI 1.00 [ 3.309364] hub 1-0:1.0: USB hub found [ 3.313127] hub 1-0:1.0: 1 port detected [ 3.317765] tegra-ehci 7d008000.usb: EHCI Host Controller [ 3.323174] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 2 [ 3.330831] tegra-ehci 7d008000.usb: irq 344, io mem 0x7d008000 [ 3.343009] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.00 [ 3.349284] hub 2-0:1.0: USB hub found [ 3.353050] hub 2-0:1.0: 1 port detected [ 3.360551] tps65910-rtc tps65910-rtc: setting system clock to 2000-01-01 00:00:02 UTC (946684802) [ 3.373819] vdd_sata,avdd_plle: disabling [ 3.378205] usb1_vbus: disabling [ 3.382118] Waiting for root device /dev/mmcblk1p1... [ 3.663017] usb 2-1: new high-speed USB device number 2 using tegra-ehci [ 4.601530] asix 2-1:1.0 eth1: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 58:6d:8f:50:ba:18

[PYBOOT] [beaver 01:57]: Timed out waiting for "<type 'str'>":

[PYBOOT] [beaver 01:58]: got exception: timeout ~$off

[PYBOOT] [beaver 01:59]: Done.

========================================================================

Board beaver-arm-tegra_defconfig failure log: -------------------------------------------------

[ 3.653939] r8169 0000:01:00.0 eth0: RTL8168evl/8111evl at 0xf08b6000, 02:04:4b:01:60:99, XID 0c900800 IRQ 375 [ 3.663941] r8169 0000:01:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko] [ 3.672834] +VDD_5V_HDMI: supplied by sys_3v3,vdd_3v3_alw [ 3.678343] vdd_1v8_gen: supplied by vdd_5v_in [ 3.687097] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 3.693735] [drm] No driver support for vblank timestamp query. [ 3.699755] drm drm: No connectors reported connected with modes [ 3.705785] [drm] Cannot find any crtc or sizes - going 1024x768 [ 3.731272] Console: switching to colour frame buffer device 128x48 [ 3.743065] drm drm: fb0: frame buffer device [ 3.770425] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 3.777938] usb3_vbus: supplied by vdd_5v_in [ 3.784023] utmi_phy_clk_enable: timeout waiting for phy to stabilize [ 3.790489] tegra-ehci 7d004000.usb: EHCI Host Controller [ 3.795904] tegra-ehci 7d004000.usb: new USB bus registered, assigned bus number 1 [ 3.803884] tegra-ehci 7d004000.usb: irq 343, io mem 0x7d004000 [ 3.820430] tegra-ehci 7d004000.usb: USB 2.0 started, EHCI 1.00 [ 3.828134] hub 1-0:1.0: USB hub found [ 3.831931] hub 1-0:1.0: 1 port detected [ 3.836733] tegra-ehci 7d008000.usb: EHCI Host Controller [ 3.842248] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 2 [ 3.850116] tegra-ehci 7d008000.usb: irq 344, io mem 0x7d008000 [ 3.870424] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.00 [ 3.877988] hub 2-0:1.0: USB hub found [ 3.881767] hub 2-0:1.0: 1 port detected [ 3.892343] tps65910-rtc tps65910-rtc: setting system clock to 2000-01-01 00:00:02 UTC (946684802) [ 3.911343] vdd_sata,avdd_plle: disabling [ 3.916145] usb1_vbus: disabling [ 3.919573] ALSA device list: [ 3.922545] #0: NVIDIA Tegra Beaver [ 3.926752] Waiting for root device /dev/mmcblk1p1... [ 4.200424] usb 2-1: new high-speed USB device number 2 using tegra-ehci [ 5.195883] asix 2-1:1.0 eth1: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 58:6d:8f:50:ba:18

[PYBOOT] [beaver 01:44]: Timed out waiting for "<type 'str'>":

[PYBOOT] [beaver 01:45]: got exception: timeout ~$off

[PYBOOT] [beaver 01:46]: Done.

========================================================================

Board colombus-arm-multi_v7_nosmp_defconfig failure log: -------------------------------------------------

[ 40.345518] EXT4-fs (mmcblk0p1): warning: mounting fs with errors, running e2fsck is recommended [ 40.359868] EXT4-fs (mmcblk0p1): re-mounted. Opts: (null) [....] Cleaning up temporary files... /tmp[?25l[?1c7[ ok 8[?25h[?0c. [....] Activating lvm and md swap...[?25l[?1c7[ ok 8[?25h[?0cdone. [....] Checking file systems...fsck from util-linux 2.20.1 [?25l[?1c7[ ok 8[?25h[?0cdone. [....] Mounting local filesystems...[?25l[?1c7[ ok 8[?25h[?0cdone. [....] Activating swapfile swap...[?25l[?1c7[ ok 8[?25h[?0cdone. [....] Cleaning up temporary files...[?25l[?1c7[ ok 8[?25h[?0c. [....] Setting kernel variables ...[?25l[?1c7[ ok 8[?25h[?0cdone. [ 81.679160] random: dd: uninitialized urandom read (512 bytes read, 53 bits of entropy available) [....] Configuring network interfaces...Internet Systems Consortium DHCP Client 4.2.2 Copyright 2004-2011 Internet Systems Consortium. All rights reserved. For info, please visit https://www.isc.org/software/dhcp/

[ 85.960943] eth0: device MAC address ba:f6:f2:1c:54:f6 [ 86.108117] RX IPC Checksum Offload disabled [ 86.112742] No MAC Management Counters available Listening on LPF/eth0/ba:f6:f2:1c:54:f6 Sending on LPF/eth0/ba:f6:f2:1c:54:f6 Sending on Socket/fallback DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 7 DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 19 DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 7 DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 15 DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 13 No DHCPOFFERS received. No working leases in persistent database - sleeping. [?25l[?1c7[ ok 8[?25h[?0cdone. [....] Cleaning up temporary files...[?25l[?1c7[ ok 8[?25h[?0c. INIT: Entering runlevel: 2 [info] Using makefile-style concurrent boot in runlevel 2.

[PYBOOT] [colombus 03:17]: Timed out waiting for "<type 'str'>":

[PYBOOT] [colombus 03:18]: got exception: timeout ~$off

[PYBOOT] [colombus 03:19]: Done.

========================================================================

Board odroidu3-arm-exynos_defconfig failure log: -------------------------------------------------

[ 1.897202] usb 1-3: new high-speed USB device number 2 using exynos-ehci [ 1.905898] dwmmc_exynos 12550000.mmc: allocated mmc-pwrseq [ 1.937210] dwmmc_exynos 12550000.mmc: 1 slots initialized [ 1.938253] usbcore: registered new interface driver usbhid [ 1.942638] usbhid: USB HID core driver [ 1.953633] NET: Registered protocol family 10 [ 1.954698] sit: IPv6 over IPv4 tunneling driver [ 1.957942] NET: Registered protocol family 17 [ 1.961489] NET: Registered protocol family 15 [ 1.966124] Registering SWP/SWPB emulation handler [ 1.972543] s3c-rtc 10070000.rtc: rtc disabled, re-enabling [ 1.976286] s3c-rtc 10070000.rtc: warning: invalid RTC value so initializing it [ 1.983876] s3c-rtc 10070000.rtc: rtc core: registered s3c as rtc1 [ 1.994884] mmc1: MAN_BKOPS_EN bit is not set [ 1.996202] mmc_host mmc1: Bus speed (slot 0) = 44000000Hz (slot req 52000000Hz, actual 44000000HZ div = 0) [ 2.003910] mmc_host mmc1: Bus speed (slot 0) = 73333333Hz (slot req 52000000Hz, actual 36666666HZ div = 1) [ 2.013713] mmc1: new DDR MMC card at address 0001 [ 2.018256] max98090 1-0010: MAX98090 REVID=0x43 [ 2.025252] max98090 1-0010: use default 2.8v micbias [ 2.028037] mmcblk0: mmc1:0001 008G92 7.28 GiB [ 2.037699] mmcblk0boot0: mmc1:0001 008G92 partition 1 4.00 MiB [ 2.038529] mmcblk0boot1: mmc1:0001 008G92 partition 2 4.00 MiB [ 2.044754] mmcblk0rpmb: mmc1:0001 008G92 partition 3 512 KiB [ 2.046988] asoc-simple-card sound: HiFi <-> 3830000.i2s mapping ok [ 2.054131] input: gpio_keys as /devices/platform/gpio_keys/input/input0 [ 2.064012] mmcblk0: p1 p2 [ 2.087753] max77686-rtc max77686-rtc: setting system clock to 2000-01-01 01:00:19 UTC (946688419) [ 2.114297] VDD10_HDMI_1.0V: disabling [ 2.115085] vdd_g3d: disabling [ 2.116150] BUCK8_2.8V: disabling [ 2.120277] ALSA device list: [ 2.121690] #0: Odroid-U3 [ 2.125625] Waiting for root device /dev/mmcblk1p2...

[PYBOOT] [odroidu3 02:09]: Timed out waiting for "<type 'str'>":

[PYBOOT] [odroidu3 02:10]: got exception: timeout ~$off

[PYBOOT] [odroidu3 02:11]: Done.

========================================================================

Board odroidu3-arm-multi_v7_defconfig failure log: -------------------------------------------------

[ 1.390606] dwmmc_exynos 12550000.mmc: No vqmmc regulator found [ 1.396512] dwmmc_exynos 12550000.mmc: allocated mmc-pwrseq [ 1.429716] dwmmc_exynos 12550000.mmc: 1 slots initialized [ 1.430230] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.436445] ledtrig-cpu: registered to indicate activity on CPUs [ 1.441306] usbcore: registered new interface driver usbhid [ 1.446739] usbhid: USB HID core driver [ 1.453228] NET: Registered protocol family 10 [ 1.455431] sit: IPv6 over IPv4 tunneling driver [ 1.459920] NET: Registered protocol family 17 [ 1.463998] can: controller area network core (rev 20120528 abi 9) [ 1.470192] NET: Registered protocol family 29 [ 1.474568] can: raw protocol (rev 20120528) [ 1.478831] can: broadcast manager protocol (rev 20120528 t) [ 1.484471] can: netlink gateway (rev 20130117) max_hops=1 [ 1.490177] Key type dns_resolver registered [ 1.494304] ThumbEE CPU extension supported. [ 1.498440] Registering SWP/SWPB emulation handler [ 1.505939] input: gpio_keys as /devices/platform/gpio_keys/input/input0 [ 1.535222] max77686-rtc max77686-rtc: setting system clock to 2000-01-01 01:00:20 UTC (946688420) [ 1.547821] VDD10_HDMI_1.0V: disabling [ 1.548497] vdd_g3d: disabling [ 1.549569] BUCK8_2.8V: disabling [ 1.552325] mmc1: MAN_BKOPS_EN bit is not set [ 1.557121] Waiting for root device /dev/mmcblk1p2... [ 1.557867] mmc_host mmc1: Bus speed (slot 0) = 44000000Hz (slot req 52000000Hz, actual 44000000HZ div = 0) [ 1.558068] mmc_host mmc1: Bus speed (slot 0) = 73333333Hz (slot req 52000000Hz, actual 36666666HZ div = 1) [ 1.558345] mmc1: new DDR MMC card at address 0001 [ 1.558744] mmcblk0: mmc1:0001 008G92 7.28 GiB [ 1.558899] mmcblk0boot0: mmc1:0001 008G92 partition 1 4.00 MiB [ 1.559054] mmcblk0boot1: mmc1:0001 008G92 partition 2 4.00 MiB [ 1.559208] mmcblk0rpmb: mmc1:0001 008G92 partition 3 512 KiB [ 1.602919] mmcblk0: p1 p2

[PYBOOT] [odroidu3 02:55]: Timed out waiting for "<type 'str'>":

[PYBOOT] [odroidu3 02:56]: got exception: timeout ~$off

[PYBOOT] [odroidu3 02:57]: Done.

========================================================================

Board seaboard-arm-multi_v7_defconfig failure log: -------------------------------------------------

[ 1.680034] vdd_ldo8,avdd_hdmi_pll: supplied by vdd_sm2,vin_ldo* [ 1.686467] vdd_ldo7,avdd_hdmi,vdd_fuse: supplied by vdd_sm2,vin_ldo* [ 1.697614] utmi_phy_clk_enable: timeout waiting for phy to stabilize [ 1.704083] tegra-ehci c5000000.usb: EHCI Host Controller [ 1.709509] tegra-ehci c5000000.usb: new USB bus registered, assigned bus number 3 [ 1.717271] tegra-ehci c5000000.usb: irq 287, io mem 0xc5000000 [ 1.723147] mmc2: switch to bus width 2 failed [ 1.723424] mmc2: switch to bus width 1 failed [ 1.723436] mmc2: new high speed MMC card at address 0001 [ 1.732320] mmcblk0: mmc2:0001 MMC08G 7.46 GiB [ 1.732543] mmcblk0boot0: mmc2:0001 MMC08G partition 1 512 KiB [ 1.742158] mmcblk0boot1: mmc2:0001 MMC08G partition 2 512 KiB [ 1.743463] mmcblk0: p3 [ 1.763778] tegra-ehci c5000000.usb: USB 2.0 started, EHCI 1.00 [ 1.770606] hub 3-0:1.0: USB hub found [ 1.774414] hub 3-0:1.0: 1 port detected [ 1.782873] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 1.789499] [drm] No driver support for vblank timestamp query. [ 1.798261] mmc0: queuing unknown CIS tuple 0x80 (50 bytes) [ 1.812085] mmc0: queuing unknown CIS tuple 0x80 (7 bytes) [ 1.820724] mmc0: queuing unknown CIS tuple 0x80 (7 bytes) [ 1.834139] mmc0: queuing unknown CIS tuple 0x80 (19 bytes) [ 1.854080] mmc0: queuing unknown CIS tuple 0x02 (1 bytes) [ 1.858473] mmc0: new SDIO card at address 0001 [ 1.871166] Console: switching to colour frame buffer device 170x48 [ 1.909953] drm drm: fb0: frame buffer device [ 1.928763] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 1.935530] input: gpio-keys as /devices/soc0/gpio-keys/input/input2 [ 1.942607] tps6586x-rtc tps6586x-rtc: setting system clock to 2009-01-01 00:00:00 UTC (1230768000) [ 1.957248] vdd_1v5: disabling [ 1.960333] vdd_1v2: disabling [ 2.497173] asix 2-1:1.0 eth0: register 'asix' at usb-c5008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, c0:c1:c0:13:08:60 [ 2.508299] Waiting for root device /dev/mmcblk2p3...

[PYBOOT] [seaboard 02:18]: Timed out waiting for "<type 'str'>":

[PYBOOT] [seaboard 02:19]: got exception: timeout ~$off

[PYBOOT] [seaboard 02:20]: Done.

========================================================================

Board seaboard-arm-multi_v7_nosmp_defconfig failure log: -------------------------------------------------

[ 1.651260] vdd_ldo8,avdd_hdmi_pll: supplied by vdd_sm2,vin_ldo* [ 1.657641] vdd_ldo7,avdd_hdmi,vdd_fuse: supplied by vdd_sm2,vin_ldo* [ 1.668036] utmi_phy_clk_enable: timeout waiting for phy to stabilize [ 1.674499] tegra-ehci c5000000.usb: EHCI Host Controller [ 1.679912] tegra-ehci c5000000.usb: new USB bus registered, assigned bus number 3 [ 1.687652] tegra-ehci c5000000.usb: irq 287, io mem 0xc5000000 [ 1.699642] tegra-ehci c5000000.usb: USB 2.0 started, EHCI 1.00 [ 1.706186] hub 3-0:1.0: USB hub found [ 1.709977] hub 3-0:1.0: 1 port detected [ 1.717240] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 1.723852] [drm] No driver support for vblank timestamp query. [ 1.810908] mmc2: switch to bus width 2 failed [ 1.811132] mmc2: switch to bus width 1 failed [ 1.811143] mmc2: new high speed MMC card at address 0001 [ 1.811462] mmcblk0: mmc2:0001 MMC08G 7.46 GiB [ 1.811618] mmcblk0boot0: mmc2:0001 MMC08G partition 1 512 KiB [ 1.811721] mmcblk0boot1: mmc2:0001 MMC08G partition 2 512 KiB [ 1.812807] mmcblk0: p3 [ 1.837184] Console: switching to colour frame buffer device 170x48 [ 1.893069] drm drm: fb0: frame buffer device [ 1.897530] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 1.903959] input: gpio-keys as /devices/soc0/gpio-keys/input/input2 [ 1.910859] tps6586x-rtc tps6586x-rtc: setting system clock to 2009-01-01 00:00:00 UTC (1230768000) [ 1.922813] vdd_1v5: disabling [ 1.925885] vdd_1v2: disabling [ 1.947425] mmc0: queuing unknown CIS tuple 0x80 (50 bytes) [ 1.961014] mmc0: queuing unknown CIS tuple 0x80 (7 bytes) [ 1.969362] mmc0: queuing unknown CIS tuple 0x80 (7 bytes) [ 1.982154] mmc0: queuing unknown CIS tuple 0x80 (19 bytes) [ 2.006774] mmc0: queuing unknown CIS tuple 0x02 (1 bytes) [ 2.015677] mmc0: new SDIO card at address 0001 [ 2.510539] asix 2-1:1.0 eth0: register 'asix' at usb-c5008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, c0:c1:c0:13:08:60 [ 2.521634] Waiting for root device /dev/mmcblk2p3...

[PYBOOT] [seaboard 02:11]: Timed out waiting for "<type 'str'>":

[PYBOOT] [seaboard 02:12]: got exception: timeout ~$off

[PYBOOT] [seaboard 02:13]: Done.

========================================================================

Board seaboard-arm-tegra_defconfig failure log: -------------------------------------------------

[ 1.822310] Key type dns_resolver registered [ 1.828439] Registering SWP/SWPB emulation handler [ 1.835735] mmc0: queuing unknown CIS tuple 0x80 (7 bytes) [ 1.844484] mmc0: queuing unknown CIS tuple 0x80 (7 bytes) [ 1.862728] tegra-dc 54200000.dc: failed to probe RGB output: -517 [ 1.869612] VDDIO_HDMI: supplied by vdd_5v0 [ 1.874306] vdd_sys: supplied by vdd_5v0 [ 1.878437] vdd_sm2,vin_ldo*: supplied by vdd_sys [ 1.883782] vdd_ldo8,avdd_hdmi_pll: supplied by vdd_sm2,vin_ldo* [ 1.890666] vdd_ldo7,avdd_hdmi,vdd_fuse: supplied by vdd_sm2,vin_ldo* [ 1.897532] mmc0: queuing unknown CIS tuple 0x80 (19 bytes) [ 1.907946] utmi_phy_clk_enable: timeout waiting for phy to stabilize [ 1.914498] tegra-ehci c5000000.usb: EHCI Host Controller [ 1.920030] tegra-ehci c5000000.usb: new USB bus registered, assigned bus number 3 [ 1.928442] tegra-ehci c5000000.usb: irq 287, io mem 0xc5000000 [ 1.951366] tegra-ehci c5000000.usb: USB 2.0 started, EHCI 1.00 [ 1.958587] mmc0: queuing unknown CIS tuple 0x02 (1 bytes) [ 1.964731] hub 3-0:1.0: USB hub found [ 1.972003] mmc0: new SDIO card at address 0001 [ 1.977718] hub 3-0:1.0: 1 port detected [ 1.987773] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 1.994410] [drm] No driver support for vblank timestamp query. [ 2.062312] Console: switching to colour frame buffer device 170x48 [ 2.079798] drm drm: fb0: frame buffer device [ 2.110832] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 2.117797] input: gpio-keys as /devices/soc0/gpio-keys/input/input4 [ 2.125246] tps6586x-rtc tps6586x-rtc: setting system clock to 2009-01-01 00:00:00 UTC (1230768000) [ 2.154407] vdd_1v5: disabling [ 2.157456] vdd_1v2: disabling [ 2.160612] ALSA device list: [ 2.163592] #0: NVIDIA Tegra Seaboard [ 2.370688] asix 2-1:1.0 eth0: register 'asix' at usb-c5008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, c0:c1:c0:13:08:60 [ 2.381941] Waiting for root device /dev/mmcblk2p3...

[PYBOOT] [seaboard 01:46]: Timed out waiting for "<type 'str'>":

[PYBOOT] [seaboard 01:47]: got exception: timeout ~$off

[PYBOOT] [seaboard 01:48]: Done.

========================================================================

Board snowball-arm-multi_v7_nosmp_defconfig failure log: -------------------------------------------------

[ 1.901794] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.909759] ledtrig-cpu: registered to indicate activity on CPUs [ 1.916015] usbcore: registered new interface driver usbhid [ 1.921600] usbhid: USB HID core driver [ 1.929473] NET: Registered protocol family 10 [ 1.987152] sit: IPv6 over IPv4 tunneling driver [ 1.992309] NET: Registered protocol family 17 [ 1.996765] can: controller area network core (rev 20120528 abi 9) [ 2.003021] NET: Registered protocol family 29 [ 2.007476] can: raw protocol (rev 20120528) [ 2.011749] can: broadcast manager protocol (rev 20120528 t) [ 2.017395] can: netlink gateway (rev 20130117) max_hops=1 [ 2.023315] Key type dns_resolver registered [ 2.027770] ThumbEE CPU extension supported. [ 2.084259] input: gpio_keys as /devices/soc0/gpio_keys/input/input0 [ 2.096984] rtc-pl031 80154000.rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800) [ 2.106079] thermal cooling_device0: thermal-cpufreq-0 bind to 0: 0-succeed [ 2.113098] thermal cooling_device0: thermal-cpufreq-0 bind to 1: 0-succeed [ 2.120086] thermal cooling_device0: thermal-cpufreq-0 bind to 2: 0-succeed [ 2.127075] db8500-cpufreq-cooling soc:cpufreq-cooling: Cooling device registered: thermal-cpufreq-0 [ 2.138977] db8500-esram12: disabling [ 2.191802] db8500-esram34: disabling [ 2.211547] V-CSI/DSI: disabling [ 2.221801] mmci-reg: disabling [ 2.225433] uart-pl011 80007000.uart: DMA channel TX dma0chan8 [ 2.231323] uart-pl011 80007000.uart: DMA channel RX dma0chan9 [ 2.247406] Waiting for root device /dev/mmcblk3p4... [ 4.119140] mmc3: new high speed MMC card at address 0001 [ 4.125274] mmcblk0: mmc3:0001 3.53 GiB [ 4.129638] mmcblk0boot0: mmc3:0001 partition 1 2.00 MiB [ 4.135284] mmcblk0boot1: mmc3:0001 partition 2 2.00 MiB [ 4.140930] mmcblk0rpmb: mmc3:0001 partition 3 128 KiB [ 4.147583] mmcblk0: p1 p2 p3 p4

[PYBOOT] [snowball 03:09]: Timed out waiting for "<type 'str'>":

[PYBOOT] [snowball 03:10]: got exception: timeout ~$off

[PYBOOT] [snowball 03:11]: Done.