Full logs are available at http://arm-soc.lixom.net/bootlogs/mainline/v4.6-rc5-215-gb49a519/
Failed boards:
arndale arm-multi_v7_nosmp_defconfig : FAILED 23:41.40 bbb arm-omap2plus_defconfig : FAILED 1:53.81 bbb arm-multi_v7_defconfig : FAILED 1:57.81 bbb arm-multi_v7_nosmp_defconfig : FAILED 2:08.91 beagleboard-x15 arm-omap2plus_defconfig : FAILED 1:44.41 beagleboard-x15 arm-multi_v7_defconfig : FAILED 1:43.73 beagleboard-x15 arm-multi_lpae_defconfig : FAILED 1:47.49 beagleboard-x15 arm-multi_v7_nosmp_defconfig : FAILED 2:18.16 beaver arm-tegra_defconfig : FAILED 1:44.90 beaver arm-multi_v7_defconfig : FAILED 1:51.28 beaver arm-multi_v7_nosmp_defconfig : FAILED 1:58.23 colombus arm-multi_v7_nosmp_defconfig : FAILED 3:20.51 cosmic arm-imx_v6_v7_defconfig : FAILED 2:01.93 cosmic arm-multi_v7_defconfig : FAILED 2:09.37 cosmic arm-multi_v7_nosmp_defconfig : FAILED 2:20.96 dalmore arm-tegra_defconfig : FAILED 1:48.56 dalmore arm-multi_v7_defconfig : FAILED 1:59.21 dalmore arm-multi_lpae_defconfig : FAILED 2:15.84 dalmore arm-multi_v7_nosmp_defconfig : FAILED 1:52.89 minnowmax minnowmax_defconfig : NO BUILD odroidu3 arm-exynos_defconfig : FAILED 1:49.80 omap5uevm arm-multi_v7_defconfig : FAILED 1:56.59 omap5uevm arm-multi_lpae_defconfig : FAILED 0:50.14 omap5uevm arm-multi_v7_nosmp_defconfig : FAILED 2:11.29 seaboard arm-tegra_defconfig : FAILED 1:48.70 seaboard arm-multi_v7_defconfig : FAILED 1:53.96 seaboard arm-multi_v7_nosmp_defconfig : FAILED 2:02.48 snow arm-multi_v7_nosmp_defconfig : FAILED 3:20.77 snowball arm-u8500_defconfig : FAILED 1:56.92 snowball arm-multi_v7_defconfig : FAILED 2:09.91 snowball arm-multi_v7_nosmp_defconfig : FAILED 2:05.21 wandboard arm-imx_v6_v7_defconfig : FAILED 2:58.35
Successful boards:
apc arm-vt8500_v6_v7_defconfig : passed 1:11.29 arndale arm-exynos_defconfig : passed 1:31.17 arndale arm-multi_v7_defconfig : passed 1:22.00 arndale arm-multi_lpae_defconfig : passed 1:20.47 capri arm-bcm_defconfig : passed 0:46.69 capri arm-multi_v7_defconfig : passed 0:54.73 capri arm-multi_v7_nosmp_defconfig : warnings 1:32.38 chitra powerpc-pasemi_defconfig : passed 2:01.66 chitra powerpc-ppc64_defconfig : passed 2:05.26 colombus arm-sunxi_defconfig : passed 2:23.20 colombus arm-multi_v7_defconfig : passed 2:48.73 colombus arm-multi_lpae_defconfig : passed 2:34.40 cubie arm-sunxi_defconfig : passed 0:57.62 cubie arm-multi_v7_defconfig : passed 0:52.14 cubie arm-multi_v7_nosmp_defconfig : passed 1:03.06 cubie2 arm-sunxi_defconfig : passed 0:50.00 cubie2 arm-multi_v7_defconfig : passed 0:57.78 cubie2 arm-multi_lpae_defconfig : passed 0:53.27 cubie2 arm-multi_v7_nosmp_defconfig : warnings 1:01.96 cubox arm-multi_v7_defconfig : passed 1:27.76 cubox arm-mvebu_v7_defconfig : passed 0:57.29 cubox arm-multi_v7_nosmp_defconfig : passed 1:17.29 hummingboard arm-imx_v6_v7_defconfig : passed 1:24.21 hummingboard arm-multi_v7_nosmp_defconfig : warnings 1:15.51 jetsontk1 arm-tegra_defconfig : passed 1:31.70 jetsontk1 arm-multi_v7_defconfig : passed 1:34.29 jetsontk1 arm-multi_lpae_defconfig : passed 2:01.61 jetsontk1 arm-multi_v7_nosmp_defconfig : warnings 1:40.07 omap5uevm arm-omap2plus_defconfig : passed 1:04.07 pandaes arm-omap2plus_defconfig : warnings 1:38.50 pandaes arm-multi_v7_defconfig : passed 1:38.95 pandaes arm-multi_v7_nosmp_defconfig : warnings 1:42.56 pi arm-exynos_defconfig : passed 2:16.11 pi arm-multi_lpae_defconfig : passed 2:44.84 pi arm-multi_v7_nosmp_defconfig : warnings 2:14.58 pit arm-exynos_defconfig : passed 2:12.00 pit arm-multi_v7_defconfig : passed 2:13.91 pit arm-multi_lpae_defconfig : passed 2:35.34 pit arm-multi_v7_nosmp_defconfig : warnings 2:14.18 seattle arm64-defconfig : warnings 2:14.46 snow arm-exynos_defconfig : passed 2:09.64 snow arm-multi_v7_defconfig : passed 2:08.34 snow arm-multi_lpae_defconfig : passed 2:00.15 trimslice arm-tegra_defconfig : passed 2:37.64 trimslice arm-multi_v7_defconfig : passed 1:45.70 trimslice arm-multi_v7_nosmp_defconfig : warnings 1:34.62 wandboard arm-multi_v7_defconfig : passed 1:11.18 wandboard arm-multi_v7_nosmp_defconfig : warnings 1:18.17
Offline boards:
colibri-vf61 arm-imx_v6_v7_defconfig : OFFLINE 1:16.25 colibri-vf61 arm-multi_v7_defconfig : OFFLINE 1:15.39 colibri-vf61 arm-multi_v7_nosmp_defconfig : OFFLINE 1:18.88 hummingboard arm-multi_v7_defconfig : OFFLINE 2:59.46 parallella arm-multi_v7_defconfig : OFFLINE 2:34.23 parallella arm-multi_v7_nosmp_defconfig : OFFLINE 2:14.61 pi arm-multi_v7_defconfig : OFFLINE 2:05.50 rk3288evb arm-multi_v7_defconfig : OFFLINE 0:46.14 rk3288evb arm-multi_lpae_defconfig : OFFLINE 1:03.34 rk3288evb arm-multi_v7_nosmp_defconfig : OFFLINE 0:51.06 sama5 arm-sama5_defconfig : OFFLINE 2:19.53 sama5d3-xplained arm-sama5_defconfig : OFFLINE 2:34.91 socfpga arm-socfpga_defconfig : OFFLINE 2:21.61 socfpga arm-multi_v7_defconfig : OFFLINE 3:20.43 socfpga arm-multi_v7_nosmp_defconfig : OFFLINE 2:13.49
Board legend is available at http://arm-soc.lixom.net/boards.html
Board arndale-arm-multi_v7_nosmp_defconfig failure log: -------------------------------------------------
[ 1.594345] usb_phy_generic.0.auto supply vcc not found, using dummy regulator [ 1.600957] usb_phy_generic.1.auto supply vcc not found, using dummy regulator [ 1.608082] exynos-dwc3 usb@12000000: no suspend clk specified [ 1.613868] usb@12000000 supply vdd33 not found, using dummy regulator [ 1.620387] usb@12000000 supply vdd10 not found, using dummy regulator [ 1.628802] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.633860] ehci-pci: EHCI PCI platform driver [ 1.638306] ehci-platform: EHCI generic platform driver [ 1.643640] ehci-omap: OMAP-EHCI Host Controller driver [ 1.648793] ehci-orion: EHCI orion driver [ 1.652770] SPEAr-ehci: EHCI SPEAr driver [ 1.656777] ehci-st: EHCI STMicroelectronics driver [ 1.661640] ehci-exynos: EHCI EXYNOS driver [ 1.665896] ehci-atmel: EHCI Atmel driver [ 1.669796] tegra-ehci: Tegra EHCI driver [ 1.673807] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.679869] ohci-pci: OHCI PCI platform driver [ 1.684318] ohci-platform: OHCI generic platform driver [ 1.689602] ohci-omap3: OHCI OMAP3 driver [ 1.693566] SPEAr-ohci: OHCI SPEAr driver [ 1.697572] ohci-st: OHCI STMicroelectronics driver [ 1.702433] ohci-atmel: OHCI Atmel driver [ 1.706709] xhci-hcd xhci-hcd.2.auto: xHCI Host Controller [ 1.711822] xhci-hcd xhci-hcd.2.auto: new USB bus registered, assigned bus number 1 [ 1.719647] xhci-hcd xhci-hcd.2.auto: hcc params 0x0220f04c hci version 0x100 quirks 0x00010010 [ 1.728141] xhci-hcd xhci-hcd.2.auto: irq 140, io mem 0x12000000 [ 1.734550] hub 1-0:1.0: USB hub found [ 1.737852] hub 1-0:1.0: 1 port detected [ 1.741955] xhci-hcd xhci-hcd.2.auto: xHCI Host Controller [ 1.747227] xhci-hcd xhci-hcd.2.auto: new USB bus registered, assigned bus number 2 [ 1.754896] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. [ 1.763320] hub 2-0:1.0: USB hub found [ 1.766678] hub 2-0:1.0: 1 port detected [ 1.770854] usbcore: registered new interface driver usb-storage [ 1.777596] mousedev: PS/2 mouse device common for all mice [ 1.784439 [PYBOOT] [arndale 23:35]: got exception: maximum recursion depth exceeded ~$off
[PYBOOT] [arndale 23:36]: Done. Board bbb-arm-multi_v7_defconfig failure log: -------------------------------------------------
[ 1.625895] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.636160] ledtrig-cpu: registered to indicate activity on CPUs [ 1.643239] usbcore: registered new interface driver usbhid [ 1.649163] usbhid: USB HID core driver [ 1.661210] NET: Registered protocol family 10 [ 1.667780] sit: IPv6 over IPv4 tunneling driver [ 1.673900] NET: Registered protocol family 17 [ 1.678665] can: controller area network core (rev 20120528 abi 9) [ 1.685304] NET: Registered protocol family 29 [ 1.690023] can: raw protocol (rev 20120528) [ 1.694541] can: broadcast manager protocol (rev 20120528 t) [ 1.700532] can: netlink gateway (rev 20130117) max_hops=1 [ 1.707274] Key type dns_resolver registered [ 1.712171] omap_voltage_late_init: Voltage driver support not added [ 1.720444] ThumbEE CPU extension supported. [ 1.725065] Registering SWP/SWPB emulation handler [ 1.767496] tps65217 0-0024: TPS65217 ID 0xe version 1.2 [ 1.774033] at24 0-0050: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.781792] omap_i2c 44e0b000.i2c: bus 0 rev0.11 at 400 kHz [ 1.790491] at24 2-0054: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.798424] at24 2-0055: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.806241] at24 2-0056: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.814062] at24 2-0057: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.821402] omap_i2c 4819c000.i2c: bus 2 rev0.11 at 100 kHz [ 1.830102] cpufreq: cpufreq_online: CPU0: Running at unlisted freq: 550000 KHz [ 1.838037] cpufreq: cpufreq_online: CPU0: Unlisted initial frequency changed to: 600000 KHz [ 1.847776] mmc1: new high speed MMC card at address 0001 [ 1.855016] hctosys: unable to open rtc device (rtc0) [ 1.868139] mmcblk1: mmc1:0001 MMC02G 1.79 GiB [ 1.874168] mmcblk1boot0: mmc1:0001 MMC02G partition 1 1.00 MiB [ 1.881144] mmcblk1boot1: mmc1:0001 MMC02G partition 2 1.00 MiB [ 1.889981] mmcblk1: p1 p2 [ 1.895708] Waiting for root device /dev/mmcblk0p2...
[PYBOOT] [bbb 01:54]: Timed out waiting for "<type 'str'>":
[PYBOOT] [bbb 01:55]: got exception: timeout ~$off
[PYBOOT] [bbb 01:56]: Done. Board bbb-arm-multi_v7_nosmp_defconfig failure log: -------------------------------------------------
[ 1.314567] sdhci: Secure Digital Host Controller Interface driver [ 1.321091] sdhci: Copyright(c) Pierre Ossman [ 1.326892] omap_hsmmc 48060000.mmc: Got CD GPIO [ 1.390055] Synopsys Designware Multimedia Card Interface Driver [ 1.397433] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.406610] ledtrig-cpu: registered to indicate activity on CPUs [ 1.413336] usbcore: registered new interface driver usbhid [ 1.419218] usbhid: USB HID core driver [ 1.428720] NET: Registered protocol family 10 [ 1.435193] sit: IPv6 over IPv4 tunneling driver [ 1.441052] NET: Registered protocol family 17 [ 1.445790] can: controller area network core (rev 20120528 abi 9) [ 1.452388] NET: Registered protocol family 29 [ 1.457084] can: raw protocol (rev 20120528) [ 1.461598] can: broadcast manager protocol (rev 20120528 t) [ 1.467575] can: netlink gateway (rev 20130117) max_hops=1 [ 1.474089] Key type dns_resolver registered [ 1.478943] omap_voltage_late_init: Voltage driver support not added [ 1.486735] ThumbEE CPU extension supported. [ 1.499252] at24 0-0050: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.506863] omap_i2c 44e0b000.i2c: bus 0 rev0.11 at 400 kHz [ 1.514927] at24 2-0054: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.522672] at24 2-0055: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.530380] at24 2-0056: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.538073] at24 2-0057: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.545373] omap_i2c 4819c000.i2c: bus 2 rev0.11 at 100 kHz [ 1.553061] hctosys: unable to open rtc device (rtc0) [ 1.563855] Waiting for root device /dev/mmcblk0p2... [ 1.599320] mmc1: new high speed MMC card at address 0001 [ 1.605784] mmcblk1: mmc1:0001 MMC02G 1.79 GiB [ 1.610853] mmcblk1boot0: mmc1:0001 MMC02G partition 1 1.00 MiB [ 1.617342] mmcblk1boot1: mmc1:0001 MMC02G partition 2 1.00 MiB [ 1.625776] mmcblk1: p1 p2
[PYBOOT] [bbb 02:06]: Timed out waiting for "<type 'str'>":
[PYBOOT] [bbb 02:07]: got exception: timeout ~$off
[PYBOOT] [bbb 02:08]: Done. Board bbb-arm-omap2plus_defconfig failure log: -------------------------------------------------
[ 2.053201] omap_hsmmc 481d8000.mmc: lookup for GPIO cd failed [ 2.059328] omap_hsmmc 481d8000.mmc: GPIO lookup for consumer wp [ 2.065663] omap_hsmmc 481d8000.mmc: using device tree for GPIO lookup [ 2.072546] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@481d8000[0]' [ 2.082155] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@481d8000[0]' [ 2.091668] omap_hsmmc 481d8000.mmc: using lookup tables for GPIO lookup [ 2.098695] omap_hsmmc 481d8000.mmc: lookup for GPIO wp failed [ 2.141960] ledtrig-cpu: registered to indicate activity on CPUs [ 2.150659] oprofile: using arm/armv7 [ 2.155821] Initializing XFRM netlink socket [ 2.160923] NET: Registered protocol family 10 [ 2.171782] sit: IPv6 over IPv4 tunneling driver [ 2.180557] NET: Registered protocol family 17 [ 2.185515] NET: Registered protocol family 15 [ 2.190775] Key type dns_resolver registered [ 2.195642] omap_voltage_late_init: Voltage driver support not added [ 2.202385] sr_dev_init: No voltage domain specified for smartreflex0. Cannot initialize [ 2.210863] sr_dev_init: No voltage domain specified for smartreflex1. Cannot initialize [ 2.221142] ThumbEE CPU extension supported. [ 2.225803] Registering SWP/SWPB emulation handler [ 2.230848] SmartReflex Class3 initialized [ 2.300577] tps65217 0-0024: TPS65217 ID 0xe version 1.2 [ 2.307850] omap_i2c 44e0b000.i2c: bus 0 rev0.11 at 400 kHz [ 2.318437] mmc1: new high speed MMC card at address 0001 [ 2.330549] omap_i2c 4819c000.i2c: bus 2 rev0.11 at 100 kHz [ 2.338889] mmcblk1: mmc1:0001 MMC02G 1.79 GiB [ 2.346690] hctosys: unable to open rtc device (rtc0) [ 2.352148] sr_init: No PMIC hook to init smartreflex [ 2.357815] sr_init: platform driver register failed for SR [ 2.398152] mmcblk1boot0: mmc1:0001 MMC02G partition 1 1.00 MiB [ 2.406130] mmcblk1boot1: mmc1:0001 MMC02G partition 2 1.00 MiB [ 2.420384] mmcblk1: p1 p2 [ 2.437779] Waiting for root device /dev/mmcblk0p2...
[PYBOOT] [bbb 01:51]: Timed out waiting for "<type 'str'>":
[PYBOOT] [bbb 01:52]: got exception: timeout ~$off
[PYBOOT] [bbb 01:53]: Done. Board beagleboard-x15-arm-multi_lpae_defconfig failure log: -------------------------------------------------
[ 1.718302] at24 0-0050: 4096 byte 24c32 EEPROM, writable, 1 bytes/write [ 1.725370] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 1.750730] rtc-ds1307 2-006f: SET TIME! [ 1.756494] rtc-ds1307 2-006f: rtc core: registered mcp7941x as rtc0 [ 1.763232] rtc-ds1307 2-006f: 64 bytes nvram [ 1.767837] omap_i2c 48060000.i2c: bus 2 rev0.12 at 400 kHz [ 1.776036] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller [ 1.781811] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1 [ 1.790037] xhci-hcd xhci-hcd.0.auto: hcc params 0x0220f04c hci version 0x100 quirks 0x00010010 [ 1.799179] xhci-hcd xhci-hcd.0.auto: irq 400, io mem 0x48890000 [ 1.806048] hub 1-0:1.0: USB hub found [ 1.809996] hub 1-0:1.0: 1 port detected [ 1.814395] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller [ 1.820164] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2 [ 1.828264] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. [ 1.837258] hub 2-0:1.0: USB hub found [ 1.841220] hub 2-0:1.0: 1 port detected [ 1.847254] omap_hsmmc 4809c000.mmc: Got CD GPIO [ 1.881315] vdd_3v3: supplied by regen1 [ 1.917973] rtc-ds1307 2-006f: setting system clock to 2001-01-01 00:00:00 UTC (978307200) [ 1.935558] aic_dvdd_fixed: disabling [ 1.940332] Waiting for root device /dev/mmcblk0p1... [ 1.962287] mmc1: new high speed MMC card at address 0001 [ 1.968255] mmcblk1: mmc1:0001 S10004 3.56 GiB [ 1.973140] mmcblk1boot0: mmc1:0001 S10004 partition 1 4.00 MiB [ 1.979481] mmcblk1boot1: mmc1:0001 S10004 partition 2 4.00 MiB [ 1.986348] mmcblk1: p1 [ 2.120217] usb 1-1: new high-speed USB device number 2 using xhci-hcd [ 2.155246] usb 2-1: new SuperSpeed USB device number 2 using xhci-hcd [ 2.180413] hub 2-1:1.0: USB hub found [ 2.184383] hub 2-1:1.0: 4 ports detected [ 2.276396] hub 1-1:1.0: USB hub found [ 2.280376] hub 1-1:1.0: 4 ports detected
[PYBOOT] [beagleboard-x15 01:44]: Timed out waiting for "<type 'str'>":
[PYBOOT] [beagleboard-x15 01:45]: got exception: timeout ~$off
[PYBOOT] [beagleboard-x15 01:46]: Done. Board beagleboard-x15-arm-multi_v7_defconfig failure log: -------------------------------------------------
[ 1.717288] at24 0-0050: 4096 byte 24c32 EEPROM, writable, 1 bytes/write [ 1.724362] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 1.750626] rtc-ds1307 2-006f: SET TIME! [ 1.756372] rtc-ds1307 2-006f: rtc core: registered mcp7941x as rtc0 [ 1.763115] rtc-ds1307 2-006f: 64 bytes nvram [ 1.767726] omap_i2c 48060000.i2c: bus 2 rev0.12 at 400 kHz [ 1.775905] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller [ 1.781678] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1 [ 1.789915] xhci-hcd xhci-hcd.0.auto: hcc params 0x0220f04c hci version 0x100 quirks 0x00010010 [ 1.799068] xhci-hcd xhci-hcd.0.auto: irq 400, io mem 0x48890000 [ 1.805933] hub 1-0:1.0: USB hub found [ 1.809887] hub 1-0:1.0: 1 port detected [ 1.814288] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller [ 1.820055] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2 [ 1.828163] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. [ 1.837179] hub 2-0:1.0: USB hub found [ 1.841142] hub 2-0:1.0: 1 port detected [ 1.847154] omap_hsmmc 4809c000.mmc: Got CD GPIO [ 1.881239] vdd_3v3: supplied by regen1 [ 1.919352] rtc-ds1307 2-006f: setting system clock to 2001-01-01 00:00:00 UTC (978307200) [ 1.937267] aic_dvdd_fixed: disabling [ 1.942019] Waiting for root device /dev/mmcblk0p1... [ 1.969190] mmc1: new high speed MMC card at address 0001 [ 1.975167] mmcblk1: mmc1:0001 S10004 3.56 GiB [ 1.980042] mmcblk1boot0: mmc1:0001 S10004 partition 1 4.00 MiB [ 1.986378] mmcblk1boot1: mmc1:0001 S10004 partition 2 4.00 MiB [ 1.993261] mmcblk1: p1 [ 2.120126] usb 1-1: new high-speed USB device number 2 using xhci-hcd [ 2.155152] usb 2-1: new SuperSpeed USB device number 2 using xhci-hcd [ 2.180315] hub 2-1:1.0: USB hub found [ 2.184281] hub 2-1:1.0: 4 ports detected [ 2.276302] hub 1-1:1.0: USB hub found [ 2.280280] hub 1-1:1.0: 4 ports detected
[PYBOOT] [beagleboard-x15 01:41]: Timed out waiting for "<type 'str'>":
[PYBOOT] [beagleboard-x15 01:42]: got exception: timeout ~$off
[PYBOOT] [beagleboard-x15 01:43]: Done. Board beagleboard-x15-arm-multi_v7_nosmp_defconfig failure log: -------------------------------------------------
[ 1.594429] at24 0-0050: 4096 byte 24c32 EEPROM, writable, 1 bytes/write [ 1.601476] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 1.626870] rtc-ds1307 2-006f: SET TIME! [ 1.632483] rtc-ds1307 2-006f: rtc core: registered mcp7941x as rtc0 [ 1.639193] rtc-ds1307 2-006f: 64 bytes nvram [ 1.643781] omap_i2c 48060000.i2c: bus 2 rev0.12 at 400 kHz [ 1.651143] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller [ 1.656914] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1 [ 1.665128] xhci-hcd xhci-hcd.0.auto: hcc params 0x0220f04c hci version 0x100 quirks 0x00010010 [ 1.674262] xhci-hcd xhci-hcd.0.auto: irq 400, io mem 0x48890000 [ 1.680991] hub 1-0:1.0: USB hub found [ 1.684943] hub 1-0:1.0: 1 port detected [ 1.689251] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller [ 1.695015] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2 [ 1.703094] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. [ 1.711961] hub 2-0:1.0: USB hub found [ 1.715902] hub 2-0:1.0: 1 port detected [ 1.721173] omap_hsmmc 4809c000.mmc: Got CD GPIO [ 1.757097] vdd_3v3: supplied by regen1 [ 1.788207] rtc-ds1307 2-006f: setting system clock to 2001-01-01 00:00:00 UTC (978307200) [ 1.801250] aic_dvdd_fixed: disabling [ 1.806626] Waiting for root device /dev/mmcblk0p1... [ 1.853413] mmc1: new high speed MMC card at address 0001 [ 1.859280] mmcblk1: mmc1:0001 S10004 3.56 GiB [ 1.864108] mmcblk1boot0: mmc1:0001 S10004 partition 1 4.00 MiB [ 1.870403] mmcblk1boot1: mmc1:0001 S10004 partition 2 4.00 MiB [ 1.877188] mmcblk1: p1 [ 1.996410] usb 1-1: new high-speed USB device number 2 using xhci-hcd [ 2.026429] usb 2-1: new SuperSpeed USB device number 2 using xhci-hcd [ 2.055196] hub 2-1:1.0: USB hub found [ 2.059173] hub 2-1:1.0: 4 ports detected [ 2.151197] hub 1-1:1.0: USB hub found [ 2.155164] hub 1-1:1.0: 4 ports detected
[PYBOOT] [beagleboard-x15 02:15]: Timed out waiting for "<type 'str'>":
[PYBOOT] [beagleboard-x15 02:16]: got exception: timeout ~$off
[PYBOOT] [beagleboard-x15 02:17]: Done. Board beagleboard-x15-arm-omap2plus_defconfig failure log: -------------------------------------------------
[ 2.173379] omap_hsmmc 4809c000.mmc: using device tree for GPIO lookup [ 2.180248] of_get_named_gpiod_flags: parsed 'cd-gpios' property of node '/ocp/mmc@4809c000[0]' - status (0) [ 2.190637] omap_hsmmc 4809c000.mmc: Got CD GPIO [ 2.195494] omap_hsmmc 4809c000.mmc: GPIO lookup for consumer wp [ 2.201799] omap_hsmmc 4809c000.mmc: using device tree for GPIO lookup [ 2.208663] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@4809c000[0]' [ 2.218265] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@4809c000[0]' [ 2.227771] omap_hsmmc 4809c000.mmc: using lookup tables for GPIO lookup [ 2.234834] omap_hsmmc 4809c000.mmc: lookup for GPIO wp failed [ 2.283624] omap_hsmmc 480b4000.mmc: GPIO lookup for consumer cd [ 2.289922] omap_hsmmc 480b4000.mmc: using device tree for GPIO lookup [ 2.296791] of_get_named_gpiod_flags: can't parse 'cd-gpios' property of node '/ocp/mmc@480b4000[0]' [ 2.306390] of_get_named_gpiod_flags: can't parse 'cd-gpio' property of node '/ocp/mmc@480b4000[0]' [ 2.315884] omap_hsmmc 480b4000.mmc: using lookup tables for GPIO lookup [ 2.322928] omap_hsmmc 480b4000.mmc: lookup for GPIO cd failed [ 2.329056] omap_hsmmc 480b4000.mmc: GPIO lookup for consumer wp [ 2.335362] omap_hsmmc 480b4000.mmc: using device tree for GPIO lookup [ 2.342202] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@480b4000[0]' [ 2.351797] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@480b4000[0]' [ 2.361295] omap_hsmmc 480b4000.mmc: using lookup tables for GPIO lookup [ 2.368343] omap_hsmmc 480b4000.mmc: lookup for GPIO wp failed [ 2.375015] vdd_3v3: supplied by regen1 [ 2.413725] hctosys: unable to open rtc device (rtc0) [ 2.419032] sr_init: No PMIC hook to init smartreflex [ 2.424528] sr_init: platform driver register failed for SR [ 2.465345] mmc1: new high speed MMC card at address 0001 [ 2.471644] aic_dvdd_fixed: disabling [ 2.473368] mmcblk1: mmc1:0001 S10004 3.56 GiB [ 2.474118] mmcblk1boot0: mmc1:0001 S10004 partition 1 4.00 MiB [ 2.474760] mmcblk1boot1: mmc1:0001 S10004 partition 2 4.00 MiB [ 2.477175] mmcblk1: p1 [ 2.495659] ldousb: disabling [ 2.501557] Waiting for root device /dev/mmcblk0p1...
[PYBOOT] [beagleboard-x15 01:41]: Timed out waiting for "<type 'str'>":
[PYBOOT] [beagleboard-x15 01:42]: got exception: timeout ~$off
[PYBOOT] [beagleboard-x15 01:43]: Done. Board beaver-arm-multi_v7_defconfig failure log: -------------------------------------------------
[ 3.173463] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 3.179047] r8169 0000:01:00.0: enabling device (0140 -> 0143) [ 3.186118] r8169 0000:01:00.0 eth0: RTL8168evl/8111evl at 0xf09f2000, 02:04:4b:01:60:99, XID 0c900800 IRQ 375 [ 3.196117] r8169 0000:01:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko] [ 3.205537] +VDD_5V_HDMI: supplied by sys_3v3,vdd_3v3_alw [ 3.211048] vdd_1v8_gen: supplied by vdd_5v_in [ 3.217995] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 3.224609] [drm] No driver support for vblank timestamp query. [ 3.230553] drm drm: No connectors reported connected with modes [ 3.236562] [drm] Cannot find any crtc or sizes - going 1024x768 [ 3.262300] Console: switching to colour frame buffer device 128x48 [ 3.274584] drm drm: fb0: frame buffer device [ 3.293409] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 3.302041] usb3_vbus: supplied by vdd_5v_in [ 3.308449] utmi_phy_clk_enable: timeout waiting for phy to stabilize [ 3.314908] tegra-ehci 7d004000.usb: EHCI Host Controller [ 3.320317] tegra-ehci 7d004000.usb: new USB bus registered, assigned bus number 1 [ 3.328159] tegra-ehci 7d004000.usb: irq 343, io mem 0x7d004000 [ 3.343422] tegra-ehci 7d004000.usb: USB 2.0 started, EHCI 1.00 [ 3.350272] hub 1-0:1.0: USB hub found [ 3.354045] hub 1-0:1.0: 1 port detected [ 3.358920] tegra-ehci 7d008000.usb: EHCI Host Controller [ 3.364330] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 2 [ 3.372070] tegra-ehci 7d008000.usb: irq 344, io mem 0x7d008000 [ 3.383415] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.00 [ 3.390183] hub 2-0:1.0: USB hub found [ 3.393950] hub 2-0:1.0: 1 port detected [ 3.404696] tps65910-rtc tps65910-rtc: setting system clock to 2000-01-01 00:00:02 UTC (946684802) [ 3.418342] vdd_sata,avdd_plle: disabling [ 3.423179] usb1_vbus: disabling [ 3.427285] Waiting for root device /dev/mmcblk0p1... [ 3.703419] usb 2-1: new high-speed USB device number 2 using tegra-ehci [ 4.641918] asix 2-1:1.0 eth1: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 58:6d:8f:50:ba:18
[PYBOOT] [beaver 01:48]: Timed out waiting for "<type 'str'>":
[PYBOOT] [beaver 01:49]: got exception: timeout ~$off
[PYBOOT] [beaver 01:50]: Done. Board beaver-arm-multi_v7_nosmp_defconfig failure log: -------------------------------------------------
[ 3.122761] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 3.128345] r8169 0000:01:00.0: enabling device (0140 -> 0143) [ 3.134950] r8169 0000:01:00.0 eth0: RTL8168evl/8111evl at 0xf087e000, 02:04:4b:01:60:99, XID 0c900800 IRQ 375 [ 3.144943] r8169 0000:01:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko] [ 3.154102] +VDD_5V_HDMI: supplied by sys_3v3,vdd_3v3_alw [ 3.159579] vdd_1v8_gen: supplied by vdd_5v_in [ 3.165246] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 3.171857] [drm] No driver support for vblank timestamp query. [ 3.177785] drm drm: No connectors reported connected with modes [ 3.183787] [drm] Cannot find any crtc or sizes - going 1024x768 [ 3.203139] Console: switching to colour frame buffer device 128x48 [ 3.214927] drm drm: fb0: frame buffer device [ 3.219363] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 3.227259] usb3_vbus: supplied by vdd_5v_in [ 3.233512] utmi_phy_clk_enable: timeout waiting for phy to stabilize [ 3.239958] tegra-ehci 7d004000.usb: EHCI Host Controller [ 3.245362] tegra-ehci 7d004000.usb: new USB bus registered, assigned bus number 1 [ 3.253077] tegra-ehci 7d004000.usb: irq 343, io mem 0x7d004000 [ 3.267838] tegra-ehci 7d004000.usb: USB 2.0 started, EHCI 1.00 [ 3.274204] hub 1-0:1.0: USB hub found [ 3.277968] hub 1-0:1.0: 1 port detected [ 3.282618] tegra-ehci 7d008000.usb: EHCI Host Controller [ 3.288026] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 2 [ 3.295687] tegra-ehci 7d008000.usb: irq 344, io mem 0x7d008000 [ 3.307836] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.00 [ 3.314102] hub 2-0:1.0: USB hub found [ 3.317860] hub 2-0:1.0: 1 port detected [ 3.325374] tps65910-rtc tps65910-rtc: setting system clock to 2000-01-01 00:00:01 UTC (946684801) [ 3.338476] vdd_sata,avdd_plle: disabling [ 3.342865] usb1_vbus: disabling [ 3.346796] Waiting for root device /dev/mmcblk0p1... [ 3.627841] usb 2-1: new high-speed USB device number 2 using tegra-ehci [ 4.566389] asix 2-1:1.0 eth1: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 58:6d:8f:50:ba:18
[PYBOOT] [beaver 01:54]: Timed out waiting for "<type 'str'>":
[PYBOOT] [beaver 01:55]: got exception: timeout ~$off
[PYBOOT] [beaver 01:56]: Done. Board beaver-arm-tegra_defconfig failure log: -------------------------------------------------
[ 3.384015] r8169 0000:01:00.0 eth0: RTL8168evl/8111evl at 0xf087e000, 02:04:4b:01:60:99, XID 0c900800 IRQ 375 [ 3.394019] r8169 0000:01:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko] [ 3.402905] +VDD_5V_HDMI: supplied by sys_3v3,vdd_3v3_alw [ 3.408429] vdd_1v8_gen: supplied by vdd_5v_in [ 3.417283] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 3.423901] [drm] No driver support for vblank timestamp query. [ 3.429907] drm drm: No connectors reported connected with modes [ 3.435920] [drm] Cannot find any crtc or sizes - going 1024x768 [ 3.461951] Console: switching to colour frame buffer device 128x48 [ 3.473777] drm drm: fb0: frame buffer device [ 3.500496] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 3.508012] usb3_vbus: supplied by vdd_5v_in [ 3.514131] utmi_phy_clk_enable: timeout waiting for phy to stabilize [ 3.520599] tegra-ehci 7d004000.usb: EHCI Host Controller [ 3.526021] tegra-ehci 7d004000.usb: new USB bus registered, assigned bus number 1 [ 3.534005] tegra-ehci 7d004000.usb: irq 343, io mem 0x7d004000 [ 3.550504] tegra-ehci 7d004000.usb: USB 2.0 started, EHCI 1.00 [ 3.558217] hub 1-0:1.0: USB hub found [ 3.562004] hub 1-0:1.0: 1 port detected [ 3.566808] tegra-ehci 7d008000.usb: EHCI Host Controller [ 3.572248] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 2 [ 3.580122] tegra-ehci 7d008000.usb: irq 344, io mem 0x7d008000 [ 3.600497] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.00 [ 3.608063] hub 2-0:1.0: USB hub found [ 3.611836] hub 2-0:1.0: 1 port detected [ 3.620449] tps65910-rtc tps65910-rtc: setting system clock to 2000-01-01 00:00:02 UTC (946684802) [ 3.639166] vdd_sata,avdd_plle: disabling [ 3.644052] usb1_vbus: disabling [ 3.647484] ALSA device list: [ 3.650440] #0: NVIDIA Tegra Beaver [ 3.654652] Waiting for root device /dev/mmcblk0p1... [ 3.930504] usb 2-1: new high-speed USB device number 2 using tegra-ehci [ 4.915907] asix 2-1:1.0 eth1: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 58:6d:8f:50:ba:18
[PYBOOT] [beaver 01:41]: Timed out waiting for "<type 'str'>":
[PYBOOT] [beaver 01:42]: got exception: timeout ~$off
[PYBOOT] [beaver 01:44]: Done. Board colombus-arm-multi_v7_nosmp_defconfig failure log: -------------------------------------------------
[....] Activating swap...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [ 41.893489] EXT4-fs (mmcblk0p1): warning: mounting fs with errors, running e2fsck is recommended [ 41.907831] EXT4-fs (mmcblk0p1): re-mounted. Opts: (null) [....] Cleaning up temporary files... /tmp[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0c. [....] Activating lvm and md swap...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [....] Checking file systems...fsck from util-linux 2.20.1 [?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [....] Mounting local filesystems...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [....] Activating swapfile swap...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [....] Cleaning up temporary files...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0c. [....] Setting kernel variables ...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [ 85.377018] random: dd urandom read with 57 bits of entropy available [....] Configuring network interfaces...Internet Systems Consortium DHCP Client 4.2.2 Copyright 2004-2011 Internet Systems Consortium. All rights reserved. For info, please visit https://www.isc.org/software/dhcp/
[ 89.801446] eth0: device MAC address 8a:3d:0d:a9:74:ed [ 89.954782] RX IPC Checksum Offload disabled [ 89.959405] No MAC Management Counters available [ 89.965183] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready Listening on LPF/eth0/8a:3d:0d:a9:74:ed Sending on LPF/eth0/8a:3d:0d:a9:74:ed Sending on Socket/fallback DHCPREQUEST on eth0 to 255.255.255.255 port 67 DHCPREQUEST on eth0 to 255.255.255.255 port 67 DHCPREQUEST on eth0 to 255.255.255.255 port 67 DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 4 DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 5 DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 12 DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 13 DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 7 DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 15
[PYBOOT] [colombus 03:17]: Timed out waiting for "<type 'str'>":
[PYBOOT] [colombus 03:18]: got exception: timeout ~$off
[PYBOOT] [colombus 03:20]: Done. Board cosmic-arm-imx_v6_v7_defconfig failure log: -------------------------------------------------
[ 14.442446] blk_update_request: I/O error, dev mmcblk0, sector 3633185 [ 18.516710] mmcblk0: error -110 transferring data, sector 3633186, nr 230, cmd response 0x900, card status 0x0 [ 18.526880] blk_update_request: I/O error, dev mmcblk0, sector 3633186 [ 22.601074] mmcblk0: error -110 transferring data, sector 3633187, nr 229, cmd response 0x900, card status 0x0 [ 22.611237] blk_update_request: I/O error, dev mmcblk0, sector 3633187 [ 26.685480] mmcblk0: error -110 transferring data, sector 3633188, nr 228, cmd response 0x900, card status 0x0 [ 26.695645] blk_update_request: I/O error, dev mmcblk0, sector 3633188 [ 30.769890] mmcblk0: error -110 transferring data, sector 3633189, nr 227, cmd response 0x900, card status 0x0 [ 30.780061] blk_update_request: I/O error, dev mmcblk0, sector 3633189 [ 34.854316] mmcblk0: error -110 transferring data, sector 3633190, nr 226, cmd response 0x900, card status 0x0 [ 34.864486] blk_update_request: I/O error, dev mmcblk0, sector 3633190 [ 38.938725] mmcblk0: error -110 transferring data, sector 3633191, nr 225, cmd response 0x900, card status 0x0 [ 38.948891] blk_update_request: I/O error, dev mmcblk0, sector 3633191 [ 43.023105] mmcblk0: error -110 transferring data, sector 3633192, nr 224, cmd response 0x900, card status 0x0 [ 43.033271] blk_update_request: I/O error, dev mmcblk0, sector 3633192 [ 47.107521] mmcblk0: error -110 transferring data, sector 3633193, nr 223, cmd response 0x900, card status 0x0 [ 47.117679] blk_update_request: I/O error, dev mmcblk0, sector 3633193 [ 51.191865] mmcblk0: error -110 transferring data, sector 3633194, nr 222, cmd response 0x900, card status 0x0 [ 51.202025] blk_update_request: I/O error, dev mmcblk0, sector 3633194 [ 55.276348] mmcblk0: error -110 transferring data, sector 3633195, nr 221, cmd response 0x900, card status 0x0 [ 55.286504] blk_update_request: I/O error, dev mmcblk0, sector 3633195 [ 59.360691] mmcblk0: error -110 transferring data, sector 3633196, nr 220, cmd response 0x900, card status 0x0 [ 59.370880] blk_update_request: I/O error, dev mmcblk0, sector 3633196 [ 63.445223] mmcblk0: error -110 transferring data, sector 3633197, nr 219, cmd response 0x900, card status 0x0 [ 63.455390] blk_update_request: I/O error, dev mmcblk0, sector 3633197 [ 67.529621] mmcblk0: error -110 transferring data, sector 3633198, nr 218, cmd response 0x900, card status 0x0 [ 67.539790] blk_update_request: I/O error, dev mmcblk0, sector 3633198 [ 71.614038] mmcblk0: error -110 transferring data, sector 3633199, nr 217, cmd response 0x900, card status 0x0 [ 71.624203] blk_update_request: I/O error, dev mmcblk0, sector 3633199 [ 75.698444] mmcblk0: error -110 transferring data, sector 3633200, nr 216, cmd response 0x900, card status 0x0 [ 75.708610] blk_update_request: I/O error, dev mmcblk0, sector 3633200 [ 79.782794] mmcblk0: error -110 transferring data, sector 3633201, nr 215, cmd response 0x900, card status 0x0 [ 79.792964] blk_update_request: I/O error, dev mmcblk0, sector 3633201
[PYBOOT] [cosmic 01:59]: Timed out waiting for "<type 'str'>":
[PYBOOT] [cosmic 02:00]: got exception: timeout ~$off
[PYBOOT] [cosmic 02:01]: Done. Board cosmic-arm-multi_v7_defconfig failure log: -------------------------------------------------
[ 14.082957] blk_update_request: I/O error, dev mmcblk0, sector 3633185 [ 18.156940] mmcblk0: error -110 transferring data, sector 3633186, nr 230, cmd response 0x900, card status 0x0 [ 18.167016] blk_update_request: I/O error, dev mmcblk0, sector 3633186 [ 22.241040] mmcblk0: error -110 transferring data, sector 3633187, nr 229, cmd response 0x900, card status 0x0 [ 22.251102] blk_update_request: I/O error, dev mmcblk0, sector 3633187 [ 26.325079] mmcblk0: error -110 transferring data, sector 3633188, nr 228, cmd response 0x900, card status 0x0 [ 26.335162] blk_update_request: I/O error, dev mmcblk0, sector 3633188 [ 30.409141] mmcblk0: error -110 transferring data, sector 3633189, nr 227, cmd response 0x900, card status 0x0 [ 30.419221] blk_update_request: I/O error, dev mmcblk0, sector 3633189 [ 34.493209] mmcblk0: error -110 transferring data, sector 3633190, nr 226, cmd response 0x900, card status 0x0 [ 34.503291] blk_update_request: I/O error, dev mmcblk0, sector 3633190 [ 38.577275] mmcblk0: error -110 transferring data, sector 3633191, nr 225, cmd response 0x900, card status 0x0 [ 38.587345] blk_update_request: I/O error, dev mmcblk0, sector 3633191 [ 42.661327] mmcblk0: error -110 transferring data, sector 3633192, nr 224, cmd response 0x900, card status 0x0 [ 42.671397] blk_update_request: I/O error, dev mmcblk0, sector 3633192 [ 46.745379] mmcblk0: error -110 transferring data, sector 3633193, nr 223, cmd response 0x900, card status 0x0 [ 46.755449] blk_update_request: I/O error, dev mmcblk0, sector 3633193 [ 50.829434] mmcblk0: error -110 transferring data, sector 3633194, nr 222, cmd response 0x900, card status 0x0 [ 50.839508] blk_update_request: I/O error, dev mmcblk0, sector 3633194 [ 54.913490] mmcblk0: error -110 transferring data, sector 3633195, nr 221, cmd response 0x900, card status 0x0 [ 54.923558] blk_update_request: I/O error, dev mmcblk0, sector 3633195 [ 58.997542] mmcblk0: error -110 transferring data, sector 3633196, nr 220, cmd response 0x900, card status 0x0 [ 59.007620] blk_update_request: I/O error, dev mmcblk0, sector 3633196 [ 63.081601] mmcblk0: error -110 transferring data, sector 3633197, nr 219, cmd response 0x900, card status 0x0 [ 63.091678] blk_update_request: I/O error, dev mmcblk0, sector 3633197 [ 67.165658] mmcblk0: error -110 transferring data, sector 3633198, nr 218, cmd response 0x900, card status 0x0 [ 67.175740] blk_update_request: I/O error, dev mmcblk0, sector 3633198 [ 71.249719] mmcblk0: error -110 transferring data, sector 3633199, nr 217, cmd response 0x900, card status 0x0 [ 71.259800] blk_update_request: I/O error, dev mmcblk0, sector 3633199 [ 75.333793] mmcblk0: error -110 transferring data, sector 3633200, nr 216, cmd response 0x900, card status 0x0 [ 75.343868] blk_update_request: I/O error, dev mmcblk0, sector 3633200 [ 79.417851] mmcblk0: error -110 transferring data, sector 3633201, nr 215, cmd response 0x900, card status 0x0 [ 79.427927] blk_update_request: I/O error, dev mmcblk0, sector 3633201
[PYBOOT] [cosmic 02:06]: Timed out waiting for "<type 'str'>":
[PYBOOT] [cosmic 02:07]: got exception: timeout ~$off
[PYBOOT] [cosmic 02:08]: Done. Board cosmic-arm-multi_v7_nosmp_defconfig failure log: -------------------------------------------------
[ 13.877878] blk_update_request: I/O error, dev mmcblk0, sector 3633185 [ 17.951805] mmcblk0: error -110 transferring data, sector 3633186, nr 230, cmd response 0x900, card status 0x0 [ 17.961860] blk_update_request: I/O error, dev mmcblk0, sector 3633186 [ 22.035780] mmcblk0: error -110 transferring data, sector 3633187, nr 229, cmd response 0x900, card status 0x0 [ 22.045834] blk_update_request: I/O error, dev mmcblk0, sector 3633187 [ 26.119755] mmcblk0: error -110 transferring data, sector 3633188, nr 228, cmd response 0x900, card status 0x0 [ 26.129816] blk_update_request: I/O error, dev mmcblk0, sector 3633188 [ 30.203732] mmcblk0: error -110 transferring data, sector 3633189, nr 227, cmd response 0x900, card status 0x0 [ 30.213789] blk_update_request: I/O error, dev mmcblk0, sector 3633189 [ 34.287711] mmcblk0: error -110 transferring data, sector 3633190, nr 226, cmd response 0x900, card status 0x0 [ 34.297772] blk_update_request: I/O error, dev mmcblk0, sector 3633190 [ 38.371690] mmcblk0: error -110 transferring data, sector 3633191, nr 225, cmd response 0x900, card status 0x0 [ 38.381765] blk_update_request: I/O error, dev mmcblk0, sector 3633191 [ 42.455693] mmcblk0: error -110 transferring data, sector 3633192, nr 224, cmd response 0x900, card status 0x0 [ 42.465753] blk_update_request: I/O error, dev mmcblk0, sector 3633192 [ 46.539671] mmcblk0: error -110 transferring data, sector 3633193, nr 223, cmd response 0x900, card status 0x0 [ 46.549720] blk_update_request: I/O error, dev mmcblk0, sector 3633193 [ 50.623634] mmcblk0: error -110 transferring data, sector 3633194, nr 222, cmd response 0x900, card status 0x0 [ 50.633685] blk_update_request: I/O error, dev mmcblk0, sector 3633194 [ 54.707600] mmcblk0: error -110 transferring data, sector 3633195, nr 221, cmd response 0x900, card status 0x0 [ 54.717657] blk_update_request: I/O error, dev mmcblk0, sector 3633195 [ 58.791574] mmcblk0: error -110 transferring data, sector 3633196, nr 220, cmd response 0x900, card status 0x0 [ 58.801632] blk_update_request: I/O error, dev mmcblk0, sector 3633196 [ 62.875552] mmcblk0: error -110 transferring data, sector 3633197, nr 219, cmd response 0x900, card status 0x0 [ 62.885604] blk_update_request: I/O error, dev mmcblk0, sector 3633197 [ 66.959525] mmcblk0: error -110 transferring data, sector 3633198, nr 218, cmd response 0x900, card status 0x0 [ 66.969578] blk_update_request: I/O error, dev mmcblk0, sector 3633198 [ 71.043498] mmcblk0: error -110 transferring data, sector 3633199, nr 217, cmd response 0x900, card status 0x0 [ 71.053551] blk_update_request: I/O error, dev mmcblk0, sector 3633199 [ 75.127474] mmcblk0: error -110 transferring data, sector 3633200, nr 216, cmd response 0x900, card status 0x0 [ 75.137533] blk_update_request: I/O error, dev mmcblk0, sector 3633200 [ 79.211449] mmcblk0: error -110 transferring data, sector 3633201, nr 215, cmd response 0x900, card status 0x0 [ 79.221507] blk_update_request: I/O error, dev mmcblk0, sector 3633201
[PYBOOT] [cosmic 02:17]: Timed out waiting for "<type 'str'>":
[PYBOOT] [cosmic 02:18]: got exception: timeout ~$off
[PYBOOT] [cosmic 02:19]: Done. Board dalmore-arm-multi_lpae_defconfig failure log: -------------------------------------------------
[ 2.497939] Key type dns_resolver registered [ 2.504366] ThumbEE CPU extension supported. [ 2.508788] Registering SWP/SWPB emulation handler [ 2.537240] vdd-sys-5v0: supplied by vdd_ac_bat [ 2.545033] VDD_5V0_HDMI_CON: supplied by vdd-sys-5v0 [ 2.555336] vdd_hdmi_5v0: supplied by vdd-sys-5v0 [ 2.569467] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 2.576261] [drm] No driver support for vblank timestamp query. [ 2.598664] mmc1: new high speed MMC card at address 0001 [ 2.608577] mmcblk1: mmc1:0001 SEM32G 29.1 GiB [ 2.616507] mmcblk1boot0: mmc1:0001 SEM32G partition 1 4.00 MiB [ 2.626129] mmcblk1boot1: mmc1:0001 SEM32G partition 2 4.00 MiB [ 2.635646] mmcblk1rpmb: mmc1:0001 SEM32G partition 3 4.00 MiB [ 2.646154] mmcblk1: p1 [ 2.755666] Console: switching to colour frame buffer device 240x75 [ 2.843575] drm drm: fb0: frame buffer device [ 2.860161] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 2.870201] usb2_vbus: supplied by vdd-sys-5v0 [ 2.881820] tegra-ehci 7d008000.usb: EHCI Host Controller [ 2.887423] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 1 [ 2.896197] tegra-ehci 7d008000.usb: irq 339, io mem 0x7d008000 [ 2.910175] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.10 [ 2.920433] hub 1-0:1.0: USB hub found [ 2.924441] hub 1-0:1.0: 1 port detected [ 2.935064] input: gpio-keys as /devices/soc0/gpio-keys/input/input0 [ 2.949349] palmas-rtc 7000d000.i2c:tps65913@58:rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800) [ 3.010533] dvdd_ts: disabling [ 3.013634] usb1_vbus: disabling [ 3.016995] vdd_cam_1v8_reg: disabling [ 3.024656] Waiting for root device /dev/mmcblk0p1... [ 3.240493] usb 1-1: new high-speed USB device number 2 using tegra-ehci [ 4.213452] asix 1-1:1.0 eth0: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 48:f8:b3:2b:29:1f [ 65.435351] random: nonblocking pool is initialized
[PYBOOT] [dalmore 02:13]: Timed out waiting for "<type 'str'>":
[PYBOOT] [dalmore 02:14]: got exception: timeout ~$off
[PYBOOT] [dalmore 02:15]: Done. Board dalmore-arm-multi_v7_defconfig failure log: -------------------------------------------------
[ 2.497964] Key type dns_resolver registered [ 2.504383] ThumbEE CPU extension supported. [ 2.508800] Registering SWP/SWPB emulation handler [ 2.540128] vdd-sys-5v0: supplied by vdd_ac_bat [ 2.547153] VDD_5V0_HDMI_CON: supplied by vdd-sys-5v0 [ 2.557596] vdd_hdmi_5v0: supplied by vdd-sys-5v0 [ 2.572863] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 2.579615] [drm] No driver support for vblank timestamp query. [ 2.597851] mmc1: new high speed MMC card at address 0001 [ 2.607144] mmcblk1: mmc1:0001 SEM32G 29.1 GiB [ 2.613822] mmcblk1boot0: mmc1:0001 SEM32G partition 1 4.00 MiB [ 2.622439] mmcblk1boot1: mmc1:0001 SEM32G partition 2 4.00 MiB [ 2.631292] mmcblk1rpmb: mmc1:0001 SEM32G partition 3 4.00 MiB [ 2.641041] mmcblk1: p1 [ 2.758116] Console: switching to colour frame buffer device 240x75 [ 2.845734] drm drm: fb0: frame buffer device [ 2.869772] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 2.879842] usb2_vbus: supplied by vdd-sys-5v0 [ 2.891444] tegra-ehci 7d008000.usb: EHCI Host Controller [ 2.897117] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 1 [ 2.905812] tegra-ehci 7d008000.usb: irq 339, io mem 0x7d008000 [ 2.919808] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.10 [ 2.930254] hub 1-0:1.0: USB hub found [ 2.934250] hub 1-0:1.0: 1 port detected [ 2.945160] input: gpio-keys as /devices/soc0/gpio-keys/input/input0 [ 2.959607] palmas-rtc 7000d000.i2c:tps65913@58:rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800) [ 3.020595] dvdd_ts: disabling [ 3.023708] usb1_vbus: disabling [ 3.027095] vdd_cam_1v8_reg: disabling [ 3.034796] Waiting for root device /dev/mmcblk0p1... [ 3.249830] usb 1-1: new high-speed USB device number 2 using tegra-ehci [ 4.228773] asix 1-1:1.0 eth0: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 48:f8:b3:2b:29:1f [ 65.072381] random: nonblocking pool is initialized
[PYBOOT] [dalmore 01:56]: Timed out waiting for "<type 'str'>":
[PYBOOT] [dalmore 01:57]: got exception: timeout ~$off
[PYBOOT] [dalmore 01:58]: Done. Board dalmore-arm-multi_v7_nosmp_defconfig failure log: -------------------------------------------------
[ 2.041979] can: broadcast manager protocol (rev 20120528 t) [ 2.047736] can: netlink gateway (rev 20130117) max_hops=1 [ 2.054412] Key type dns_resolver registered [ 2.059531] ThumbEE CPU extension supported. [ 2.091690] vdd-sys-5v0: supplied by vdd_ac_bat [ 2.096626] VDD_5V0_HDMI_CON: supplied by vdd-sys-5v0 [ 2.106709] vdd_hdmi_5v0: supplied by vdd-sys-5v0 [ 2.129857] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 2.136542] [drm] No driver support for vblank timestamp query. [ 2.301312] Console: switching to colour frame buffer device 240x75 [ 2.388237] drm drm: fb0: frame buffer device [ 2.392853] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 2.401050] usb2_vbus: supplied by vdd-sys-5v0 [ 2.407015] mmc1: new high speed MMC card at address 0001 [ 2.416433] tegra-ehci 7d008000.usb: EHCI Host Controller [ 2.422012] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 1 [ 2.430150] mmcblk1: mmc1:0001 SEM32G 29.1 GiB [ 2.435179] mmcblk1boot0: mmc1:0001 SEM32G partition 1 4.00 MiB [ 2.441901] tegra-ehci 7d008000.usb: irq 339, io mem 0x7d008000 [ 2.447978] mmcblk1boot1: mmc1:0001 SEM32G partition 2 4.00 MiB [ 2.454377] mmcblk1rpmb: mmc1:0001 SEM32G partition 3 4.00 MiB [ 2.461139] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.10 [ 2.469311] mmcblk1: p1 [ 2.473197] hub 1-0:1.0: USB hub found [ 2.481679] hub 1-0:1.0: 1 port detected [ 2.489870] input: gpio-keys as /devices/soc0/gpio-keys/input/input0 [ 2.501202] palmas-rtc 7000d000.i2c:tps65913@58:rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800) [ 2.541253] dvdd_ts: disabling [ 2.544342] usb1_vbus: disabling [ 2.547648] vdd_cam_1v8_reg: disabling [ 2.553141] Waiting for root device /dev/mmcblk0p1... [ 2.795238] usb 1-1: new high-speed USB device number 2 using tegra-ehci [ 3.745831] asix 1-1:1.0 eth0: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 48:f8:b3:2b:29:1f
[PYBOOT] [dalmore 01:50]: Timed out waiting for "<type 'str'>":
[PYBOOT] [dalmore 01:51]: got exception: timeout ~$off
[PYBOOT] [dalmore 01:52]: Done. Board dalmore-arm-tegra_defconfig failure log: -------------------------------------------------
[ 2.668725] Bluetooth: RFCOMM ver 1.11 [ 2.672671] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 2.678067] Bluetooth: BNEP socket layer initialized [ 2.683156] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 2.689152] Bluetooth: HIDP socket layer initialized [ 2.696181] Key type dns_resolver registered [ 2.705761] Registering SWP/SWPB emulation handler [ 2.736068] vdd-sys-5v0: supplied by vdd_ac_bat [ 2.742370] VDD_5V0_HDMI_CON: supplied by vdd-sys-5v0 [ 2.750122] vdd_hdmi_5v0: supplied by vdd-sys-5v0 [ 2.774172] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 2.780964] [drm] No driver support for vblank timestamp query. [ 2.958379] Console: switching to colour frame buffer device 240x75 [ 3.044593] drm drm: fb0: frame buffer device [ 3.071186] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 3.078448] usb2_vbus: supplied by vdd-sys-5v0 [ 3.086887] tegra-ehci 7d008000.usb: EHCI Host Controller [ 3.092705] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 1 [ 3.101890] tegra-ehci 7d008000.usb: irq 339, io mem 0x7d008000 [ 3.121202] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.10 [ 3.135331] hub 1-0:1.0: USB hub found [ 3.139293] hub 1-0:1.0: 1 port detected [ 3.153080] input: gpio-keys as /devices/soc0/gpio-keys/input/input1 [ 3.168132] palmas-rtc 7000d000.i2c:tps65913@58:rtc: setting system clock to 2000-01-01 00:00:01 UTC (946684801) [ 3.263474] dvdd_ts: disabling [ 3.266580] usb1_vbus: disabling [ 3.269843] vdd_cam_1v8_reg: disabling [ 3.274665] ALSA device list: [ 3.277666] #0: NVIDIA Tegra Dalmore [ 3.283711] Waiting for root device /dev/mmcblk0p1... [ 3.461080] usb 1-1: new high-speed USB device number 2 using tegra-ehci [ 4.486555] asix 1-1:1.0 eth0: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 48:f8:b3:2b:29:1f [ 61.709330] random: nonblocking pool is initialized
[PYBOOT] [dalmore 01:45]: Timed out waiting for "<type 'str'>":
[PYBOOT] [dalmore 01:46]: got exception: timeout ~$off
[PYBOOT] [dalmore 01:48]: Done. Board odroidu3-arm-exynos_defconfig failure log: -------------------------------------------------
[ 1.650479] dwmmc_exynos 12550000.mmc: DW MMC controller at irq 107,32 bit host data width,128 deep fifo [ 1.658035] usb 1-3: new high-speed USB device number 2 using exynos-ehci [ 1.666944] dwmmc_exynos 12550000.mmc: allocated mmc-pwrseq [ 1.698078] dwmmc_exynos 12550000.mmc: 1 slots initialized [ 1.699334] usbcore: registered new interface driver usbhid [ 1.704499] usbhid: USB HID core driver [ 1.713319] NET: Registered protocol family 10 [ 1.713939] sit: IPv6 over IPv4 tunneling driver [ 1.717165] NET: Registered protocol family 17 [ 1.721186] NET: Registered protocol family 15 [ 1.725635] Key type dns_resolver registered [ 1.729971] Registering SWP/SWPB emulation handler [ 1.735801] s3c-rtc 10070000.rtc: rtc disabled, re-enabling [ 1.740368] s3c-rtc 10070000.rtc: rtc core: registered s3c as rtc1 [ 1.766804] mmc_host mmc1: Bus speed (slot 0) = 44000000Hz (slot req 52000000Hz, actual 44000000HZ div = 0) [ 1.768597] max98090 1-0010: MAX98090 REVID=0x43 [ 1.770820] max98090 1-0010: use default 2.8v micbias [ 1.780788] mmc_host mmc1: Bus speed (slot 0) = 73333333Hz (slot req 52000000Hz, actual 36666666HZ div = 1) [ 1.790580] mmc1: new DDR MMC card at address 0001 [ 1.794615] asoc-simple-card sound: HiFi <-> 3830000.i2s mapping ok [ 1.797692] input: gpio_keys as /devices/platform/gpio_keys/input/input0 [ 1.808517] mmcblk1: mmc1:0001 008G92 7.28 GiB [ 1.812739] mmcblk1boot0: mmc1:0001 008G92 partition 1 4.00 MiB [ 1.818572] mmcblk1boot1: mmc1:0001 008G92 partition 2 4.00 MiB [ 1.824472] mmcblk1rpmb: mmc1:0001 008G92 partition 3 512 KiB [ 1.831045] mmcblk1: p1 p2 [ 1.840913] max77686-rtc max77686-rtc: setting system clock to 2000-01-01 01:00:19 UTC (946688419) [ 1.860974] VDD10_HDMI_1.0V: disabling [ 1.861673] vdd_g3d: disabling [ 1.862740] BUCK8_2.8V: disabling [ 1.866738] ALSA device list: [ 1.868385] #0: Odroid-U3 [ 1.872035] Waiting for root device /dev/mmcblk0p2...
[PYBOOT] [odroidu3 01:46]: Timed out waiting for "<type 'str'>":
[PYBOOT] [odroidu3 01:47]: got exception: timeout ~$off
[PYBOOT] [odroidu3 01:49]: Done. Board omap5uevm-arm-multi_lpae_defconfig failure log: -------------------------------------------------
[ 1.992349] smsc95xx 1-3:1.0 eth0: register 'smsc95xx' at usb-4a064c00.ehci-3, smsc95xx USB 2.0 Ethernet, e6:0b:fa:27:03:a3 [ 2.005347] omap_i2c 4807c000.i2c: bus 4 rev0.12 at 400 kHz [ 2.046398] cpufreq: cpufreq_online: CPU0: Running at unlisted freq: 1100000 KHz [ 2.054338] cpufreq: cpufreq_online: CPU0: Unlisted initial frequency changed to: 1500000 KHz [ 2.063860] /ocp/omap_dwc3@4a020000: could not find phandle [ 2.069710] omap-dwc3 4a020000.omap_dwc3: failed to get phandle in /ocp/omap_dwc3@4a020000 node [ 2.082995] Unable to handle kernel NULL pointer dereference at virtual address 00000000 [ 2.091457] pgd = c0204000 [ 2.094282] [00000000] *pgd=00000000 [ 2.098028] Internal error: Oops: 80000005 [#1] SMP ARM [ 2.103489] Modules linked in: [ 2.106691] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 4.6.0-rc5-00215-gb49a519 #1 [ 2.114521] Hardware name: Generic OMAP5 (Flattened Device Tree) [ 2.120809] task: c1306a80 ti: c1300000 task.ti: c1300000 [ 2.126457] PC is at 0x0 [ 2.129109] LR is at cpu_startup_entry+0x130/0x220 [ 2.134125] pc : [<00000000>] lr : [<c0378b30>] psr: 60000093 [ 2.134125] sp : c1301fa8 ip : 2ddc3000 fp : c1300000 [ 2.146144] r10: c140e0e8 r9 : c130250c r8 : c1302504 [ 2.151609] r7 : c1209600 r6 : 00000000 r5 : 00000000 r4 : c13024a4 [ 2.158436] r3 : c1301fa8 r2 : c1209600 r1 : 2ddc3000 r0 : 00000000 [ 2.165267] Flags: nZCv IRQs off FIQs on Mode SVC_32 ISA ARM Segment none [ 2.172826] Control: 10c5387d Table: 8020406a DAC: 00000051 [ 2.178841] Process swapper/0 (pid: 0, stack limit = 0xc1300220) [ 2.185125] Stack: (0xc1301fa8 to 0xc1302000) [ 2.189682] 1fa0: c1301fb4 c1301fa8 00000000 ffffffff 00000000 c1100c4c [ 2.198243] 1fc0: ffffffff ffffffff 00000000 c110068c 00000000 c11a4a30 c14105d4 c1302480 [ 2.206810] 1fe0: c11a4a2c c1307c5c 8020406a 412fc0f2 00000000 8020807c 00000000 00000000 [ 2.215376] [<c0378b30>] (cpu_startup_entry) from [<c1100c4c>] (start_kernel+0x370/0x37c) [ 2.223935] [<c1100c4c>] (start_kernel) from [<8020807c>] (0x8020807c) [ 2.230766] Code: bad PC value [ 2.233958] ---[ end trace efd1de50ab5aee4a ]--- [ 2.238790] Kernel panic - not syncing: Attempted to kill the idle task! [ 3.222749] SMP: failed to stop secondary CPUs [ 3.227398] ---[ end Kernel panic - not syncing: Attempted to kill the idle task!
[PYBOOT] [omap5uevm 00:48]: got exception: panic ~$off
[PYBOOT] [omap5uevm 00:49]: Done. Board omap5uevm-arm-multi_v7_defconfig failure log: -------------------------------------------------
[ 70.290600] 1e60: 00000010 00000001 c1206c80 c0394c58 c130255c eefd5ed0 ee091f88 c03a5398 [ 70.299156] 1e80: 00000000 eefd5ed0 56753db6 00000010 00000000 eefd5c80 eefd5ed0 eefd5cc0 [ 70.307709] 1ea0: 00000000 c03954fc 70d42001 c140e10e 56753c70 00000010 eefd5d18 eefd5c94 [ 70.316261] 1ec0: 00000003 ffffffff eefd5c80 eefd5d38 eefd5d18 eefd5cf8 c1206c80 c0395b94 [ 70.324817] 1ee0: eefd5d38 ee008000 7fffffff 2ddcf000 56753c70 00000010 56753c70 00000010 [ 70.333374] 1f00: 00000000 ee003e40 eefdbf40 c1302890 ee025bc0 00000013 fa213000 c140e0e8 [ 70.341932] 1f20: ee090000 c09da74c c09da724 c03889c8 c1207510 00000000 00000000 00000001 [ 70.350489] 1f40: ee008000 c0384738 0000019c c03849e8 c1302890 c13401b8 fa21200c ee091f88 [ 70.359048] 1f60: fa212000 c0301770 c032ae1c c03088d8 a0000013 ffffffff ee091fbc c1302504 [ 70.367602] 1f80: c130250c c030c654 00000001 00000000 ea000013 f0880000 c13024a4 00000000 [ 70.376156] 1fa0: 00000000 c1209600 c1302504 c130250c c140e0e8 ee090000 2ddcf000 ee091fd8 [ 70.384711] 1fc0: c032ae1c c03088d8 a0000013 ffffffff 00000051 c03088d4 00000000 c0378bbc [ 70.393264] 1fe0: 00000051 ee091fe0 c0301c54 c14106e0 00000000 80301c6c 08b8c1e0 2d9940a1 [ 70.401821] [<c0372f38>] (trigger_load_balance) from [<c0394c58>] (update_process_times+0x58/0x64) [ 70.411199] [<c0394c58>] (update_process_times) from [<c03a5398>] (tick_sched_timer+0x48/0x8c) [ 70.420212] [<c03a5398>] (tick_sched_timer) from [<c03954fc>] (__hrtimer_run_queues+0x110/0x184) [ 70.429404] [<c03954fc>] (__hrtimer_run_queues) from [<c0395b94>] (hrtimer_interrupt+0xbc/0x218) [ 70.438604] [<c0395b94>] (hrtimer_interrupt) from [<c09da74c>] (arch_timer_handler_virt+0x28/0x30) [ 70.447987] [<c09da74c>] (arch_timer_handler_virt) from [<c03889c8>] (handle_percpu_devid_irq+0x6c/0x84) [ 70.457910] [<c03889c8>] (handle_percpu_devid_irq) from [<c0384738>] (generic_handle_irq+0x24/0x34) [ 70.467373] [<c0384738>] (generic_handle_irq) from [<c03849e8>] (__handle_domain_irq+0x5c/0xb4) [ 70.476473] [<c03849e8>] (__handle_domain_irq) from [<c0301770>] (gic_handle_irq+0x54/0x94) [ 70.485209] [<c0301770>] (gic_handle_irq) from [<c030c654>] (__irq_svc+0x54/0x70) [ 70.493032] Exception stack(0xee091f88 to 0xee091fd0) [ 70.498313] 1f80: 00000001 00000000 ea000013 f0880000 c13024a4 00000000 [ 70.506868] 1fa0: 00000000 c1209600 c1302504 c130250c c140e0e8 ee090000 2ddcf000 ee091fd8 [ 70.515422] 1fc0: c032ae1c c03088d8 a0000013 ffffffff [ 70.520706] [<c030c654>] (__irq_svc) from [<c03088d8>] (arch_cpu_idle+0x20/0x3c) [ 70.528446] [<c03088d8>] (arch_cpu_idle) from [<c0378bbc>] (cpu_startup_entry+0x1bc/0x220) [ 70.537096] [<c0378bbc>] (cpu_startup_entry) from [<80301c6c>] (0x80301c6c) [ 70.544378] Code: e5d424d0 e595a000 e3520000 e59494f0 (18bd8ff8) [ 70.550751] ---[ end trace 6c6bfdf54185e56e ]--- [ 70.555576] Kernel panic - not syncing: Fatal exception in interrupt [ 71.539168] SMP: failed to stop secondary CPUs [ 71.543814] ---[ end Kernel panic - not syncing: Fatal exception in interrupt
[PYBOOT] [omap5uevm 01:54]: got exception: panic ~$off
[PYBOOT] [omap5uevm 01:56]: Done. Board omap5uevm-arm-multi_v7_nosmp_defconfig failure log: -------------------------------------------------
[ 1.656869] ledtrig-cpu: registered to indicate activity on CPUs [ 1.663251] usbcore: registered new interface driver usbhid [ 1.669076] usbhid: USB HID core driver [ 1.675698] NET: Registered protocol family 10 [ 1.680908] sit: IPv6 over IPv4 tunneling driver [ 1.686083] NET: Registered protocol family 17 [ 1.690737] can: controller area network core (rev 20120528 abi 9) [ 1.697236] NET: Registered protocol family 29 [ 1.701876] can: raw protocol (rev 20120528) [ 1.706347] can: broadcast manager protocol (rev 20120528 t) [ 1.712270] can: netlink gateway (rev 20130117) max_hops=1 [ 1.718223] Key type dns_resolver registered [ 1.722767] omap_vc_init_channel: No PMIC info for vdd_core [ 1.728601] omap_vp_init: No PMIC info for vdd_core [ 1.733707] omap_vc_init_channel: No PMIC info for vdd_mm [ 1.739352] omap_vp_init: No PMIC info for vdd_mm [ 1.744273] omap_vc_init_channel: No PMIC info for vdd_mpu [ 1.749997] omap_vp_init: No PMIC info for vdd_mpu [ 1.755271] Power Management for TI OMAP4+ devices. [ 1.760469] ThumbEE CPU extension supported. [ 1.765031] usb 1-3: new high-speed USB device number 2 using ehci-omap [ 1.776529] palmas 0-0048: Irq flag is 0x00000000 [ 1.799477] palmas 0-0048: Muxing GPIO 2, PWM 0, LED 0 [ 1.808817] palmas-rtc 48070000.i2c:palmas@48:rtc: rtc core: registered 48070000.i2c:palmas as rtc0 [ 1.833284] mmc0: new high speed MMC card at address 0001 [ 1.839189] mmcblk0: mmc0:0001 SEM04G 3.69 GiB [ 1.844053] mmcblk0boot0: mmc0:0001 SEM04G partition 1 2.00 MiB [ 1.850411] mmcblk0boot1: mmc0:0001 SEM04G partition 2 2.00 MiB [ 1.865274] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 1.887848] omap_i2c 4807c000.i2c: bus 4 rev0.12 at 400 kHz [ 1.904847] smsc95xx v1.0.4 [ 1.923305] cpufreq: cpufreq_online: CPU0: Running at unlisted freq: 1100000 KHz [ 1.931227] cpufreq: cpufreq_online: CPU0: Unlisted initial frequency changed to: 1500000 KHz
[PYBOOT] [omap5uevm 02:07]: Timed out waiting for "<type 'str'>":
[PYBOOT] [omap5uevm 02:08]: got exception: timeout ~$off
[PYBOOT] [omap5uevm 02:09]: Done. Board seaboard-arm-multi_v7_defconfig failure log: -------------------------------------------------
[ 1.651463] vdd_ldo7,avdd_hdmi,vdd_fuse: supplied by vdd_sm2,vin_ldo* [ 1.665905] utmi_phy_clk_enable: timeout waiting for phy to stabilize [ 1.672416] tegra-ehci c5000000.usb: EHCI Host Controller [ 1.677868] tegra-ehci c5000000.usb: new USB bus registered, assigned bus number 3 [ 1.685799] tegra-ehci c5000000.usb: irq 287, io mem 0xc5000000 [ 1.728260] mmc0: queuing unknown CIS tuple 0x80 (50 bytes) [ 1.728771] tegra-ehci c5000000.usb: USB 2.0 started, EHCI 1.00 [ 1.729979] hub 3-0:1.0: USB hub found [ 1.730043] hub 3-0:1.0: 1 port detected [ 1.748009] mmc2: switch to bus width 8 failed [ 1.754169] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 1.755960] mmc0: queuing unknown CIS tuple 0x80 (7 bytes) [ 1.758947] mmc0: queuing unknown CIS tuple 0x80 (7 bytes) [ 1.766639] mmc0: queuing unknown CIS tuple 0x80 (19 bytes) [ 1.777378] [drm] No driver support for vblank timestamp query. [ 1.783452] mmc2: switch to bus width 4 failed [ 1.787126] mmc0: queuing unknown CIS tuple 0x02 (1 bytes) [ 1.792928] mmc0: new SDIO card at address 0001 [ 1.797983] mmc2: new high speed MMC card at address 0001 [ 1.804123] mmcblk2: mmc2:0001 MMC08G 7.46 GiB [ 1.808998] mmcblk2boot0: mmc2:0001 MMC08G partition 1 512 KiB [ 1.829819] mmcblk2boot1: mmc2:0001 MMC08G partition 2 512 KiB [ 1.837594] mmcblk2: p3 [ 1.879902] Console: switching to colour frame buffer device 170x48 [ 1.911174] drm drm: fb0: frame buffer device [ 1.928778] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 1.935931] input: gpio-keys as /devices/soc0/gpio-keys/input/input2 [ 1.943158] tps6586x-rtc tps6586x-rtc: setting system clock to 2009-01-01 00:00:00 UTC (1230768000) [ 1.959598] vdd_1v5: disabling [ 1.962663] vdd_1v2: disabling [ 2.598541] asix 2-1:1.0 eth0: register 'asix' at usb-c5008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, c0:c1:c0:13:08:60 [ 2.609961] Waiting for root device /dev/mmcblk0p3... [ 59.007571] random: nonblocking pool is initialized
[PYBOOT] [seaboard 01:51]: Timed out waiting for "<type 'str'>":
[PYBOOT] [seaboard 01:52]: got exception: timeout ~$off
[PYBOOT] [seaboard 01:53]: Done. Board seaboard-arm-multi_v7_nosmp_defconfig failure log: -------------------------------------------------
[ 1.612142] vdd_ldo8,avdd_hdmi_pll: supplied by vdd_sm2,vin_ldo* [ 1.618473] vdd_ldo7,avdd_hdmi,vdd_fuse: supplied by vdd_sm2,vin_ldo* [ 1.628385] utmi_phy_clk_enable: timeout waiting for phy to stabilize [ 1.634832] tegra-ehci c5000000.usb: EHCI Host Controller [ 1.640244] tegra-ehci c5000000.usb: new USB bus registered, assigned bus number 3 [ 1.647996] tegra-ehci c5000000.usb: irq 287, io mem 0xc5000000 [ 1.663244] tegra-ehci c5000000.usb: USB 2.0 started, EHCI 1.00 [ 1.669717] hub 3-0:1.0: USB hub found [ 1.673523] hub 3-0:1.0: 1 port detected [ 1.683933] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 1.690560] [drm] No driver support for vblank timestamp query. [ 1.716671] mmc2: switch to bus width 8 failed [ 1.716910] mmc2: switch to bus width 4 failed [ 1.716919] mmc2: new high speed MMC card at address 0001 [ 1.717242] mmcblk2: mmc2:0001 MMC08G 7.46 GiB [ 1.717360] mmcblk2boot0: mmc2:0001 MMC08G partition 1 512 KiB [ 1.717499] mmcblk2boot1: mmc2:0001 MMC08G partition 2 512 KiB [ 1.718619] mmcblk2: p3 [ 1.721941] mmc0: queuing unknown CIS tuple 0x80 (50 bytes) [ 1.729518] mmc0: queuing unknown CIS tuple 0x80 (7 bytes) [ 1.742634] Console: switching to colour frame buffer device 170x48 [ 1.772739] mmc0: queuing unknown CIS tuple 0x80 (7 bytes) [ 1.810729] drm drm: fb0: frame buffer device [ 1.815203] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 1.821616] input: gpio-keys as /devices/soc0/gpio-keys/input/input2 [ 1.828504] tps6586x-rtc tps6586x-rtc: setting system clock to 2009-01-01 00:00:00 UTC (1230768000) [ 1.840167] vdd_1v5: disabling [ 1.843246] vdd_1v2: disabling [ 1.849426] mmc0: queuing unknown CIS tuple 0x80 (19 bytes) [ 1.873127] mmc0: queuing unknown CIS tuple 0x02 (1 bytes) [ 1.881623] mmc0: new SDIO card at address 0001 [ 2.521820] asix 2-1:1.0 eth0: register 'asix' at usb-c5008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, c0:c1:c0:13:08:60 [ 2.532657] Waiting for root device /dev/mmcblk0p3...
[PYBOOT] [seaboard 01:59]: Timed out waiting for "<type 'str'>":
[PYBOOT] [seaboard 02:00]: got exception: timeout ~$off
[PYBOOT] [seaboard 02:01]: Done. Board seaboard-arm-tegra_defconfig failure log: -------------------------------------------------
[ 1.638969] Bluetooth: BNEP socket layer initialized [ 1.644017] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 1.650051] Bluetooth: HIDP socket layer initialized [ 1.655761] Key type dns_resolver registered [ 1.660085] mmc0: queuing unknown CIS tuple 0x02 (1 bytes) [ 1.670505] mmc0: new SDIO card at address 0001 [ 1.677968] Registering SWP/SWPB emulation handler [ 1.693191] tegra-dc 54200000.dc: failed to probe RGB output: -517 [ 1.699909] VDDIO_HDMI: supplied by vdd_5v0 [ 1.704420] vdd_sys: supplied by vdd_5v0 [ 1.708428] vdd_sm2,vin_ldo*: supplied by vdd_sys [ 1.713456] vdd_ldo8,avdd_hdmi_pll: supplied by vdd_sm2,vin_ldo* [ 1.720010] vdd_ldo7,avdd_hdmi,vdd_fuse: supplied by vdd_sm2,vin_ldo* [ 1.730173] utmi_phy_clk_enable: timeout waiting for phy to stabilize [ 1.736625] tegra-ehci c5000000.usb: EHCI Host Controller [ 1.742066] tegra-ehci c5000000.usb: new USB bus registered, assigned bus number 3 [ 1.749952] tegra-ehci c5000000.usb: irq 287, io mem 0xc5000000 [ 1.770053] tegra-ehci c5000000.usb: USB 2.0 started, EHCI 1.00 [ 1.777920] hub 3-0:1.0: USB hub found [ 1.781741] hub 3-0:1.0: 1 port detected [ 1.791941] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 1.798557] [drm] No driver support for vblank timestamp query. [ 1.865694] Console: switching to colour frame buffer device 170x48 [ 1.883364] drm drm: fb0: frame buffer device [ 1.910056] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 1.917035] input: gpio-keys as /devices/soc0/gpio-keys/input/input4 [ 1.924495] tps6586x-rtc tps6586x-rtc: setting system clock to 2009-01-01 00:00:00 UTC (1230768000) [ 1.942245] vdd_1v5: disabling [ 1.945307] vdd_1v2: disabling [ 1.948460] ALSA device list: [ 1.951520] #0: NVIDIA Tegra Seaboard [ 2.317853] asix 2-1:1.0 eth0: register 'asix' at usb-c5008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, c0:c1:c0:13:08:60 [ 2.328946] Waiting for root device /dev/mmcblk0p3...
[PYBOOT] [seaboard 01:45]: Timed out waiting for "<type 'str'>":
[PYBOOT] [seaboard 01:46]: got exception: timeout ~$off
[PYBOOT] [seaboard 01:47]: Done. Board snow-arm-multi_v7_nosmp_defconfig failure log: -------------------------------------------------
[....] Waiting for /dev to be fully populated...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [....] Activating swap...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [ 3.201045] EXT4-fs (mmcblk0p3): warning: mounting fs with errors, running e2fsck is recommended [ 3.209390] EXT4-fs (mmcblk0p3): re-mounted. Opts: (null) [....] Cleaning up temporary files... /tmp[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0c. [....] Activating lvm and md swap...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [....] Checking file systems...fsck from util-linux 2.20.1 [?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [....] Mounting local filesystems...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [....] Activating swapfile swap...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [....] Cleaning up temporary files...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0c. [....] Setting kernel variables ...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [ 4.259295] random: dd urandom read with 58 bits of entropy available [....] Configuring network interfaces...Internet Systems Consortium DHCP Client 4.2.2 Copyright 2004-2011 Internet Systems Consortium. All rights reserved. For info, please visit https://www.isc.org/software/dhcp/
Cannot find device "eth0" Bind socket to interface: No such device Failed to bring up eth0. [?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [....] Cleaning up temporary files...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0c. INIT: Entering runlevel: 2 [[36minfo[39;49m] Using makefile-style concurrent boot in runlevel 2. [....] Starting enhanced syslogd: rsyslogd[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0c. [....] Starting web server: apache2apache2: Could not reliably determine the server's fully qualified domain name, using 127.0.0.1 for ServerName [?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0c. [....] Starting periodic command scheduler: cron[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0c. [....] Loading cpufreq kernel modules...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone (none). [....] Starting system message bus: dbus[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0c. [....] CPUFreq Utilities: Setting ondemand CPUFreq governor...CPU0...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [....] Starting OpenBSD Secure Shell server: sshd[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0c.
[PYBOOT] [snow 03:18]: Timed out waiting for "<type 'str'>":
[PYBOOT] [snow 03:19]: got exception: timeout ~$off
[PYBOOT] [snow 03:20]: Done. Board snowball-arm-multi_v7_defconfig failure log: -------------------------------------------------
[ 1.970611] can: controller area network core (rev 20120528 abi 9) [ 1.976928] NET: Registered protocol family 29 [ 1.981414] can: raw protocol (rev 20120528) [ 1.985717] can: broadcast manager protocol (rev 20120528 t) [ 1.991424] can: netlink gateway (rev 20130117) max_hops=1 [ 1.997741] Key type dns_resolver registered [ 2.002380] ThumbEE CPU extension supported. [ 2.006713] Registering SWP/SWPB emulation handler [ 2.019409] input: gpio_keys as /devices/soc0/gpio_keys/input/input0 [ 2.026550] rtc-pl031 80154000.rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800) [ 2.036071] thermal cooling_device0: thermal-cpufreq-0 bind to 0: 0-succeed [ 2.043121] thermal cooling_device0: thermal-cpufreq-0 bind to 1: 0-succeed [ 2.050170] thermal cooling_device0: thermal-cpufreq-0 bind to 2: 0-succeed [ 2.057189] db8500-cpufreq-cooling soc:cpufreq-cooling: Cooling device registered: thermal-cpufreq-0 [ 2.074676] db8500-esram12: disabling [ 2.078491] db8500-esram34: disabling [ 2.082641] V-CSI/DSI: disabling [ 2.087036] mmci-reg: disabling [ 2.093139] uart-pl011 80007000.uart: DMA channel TX dma0chan20 [ 2.099182] uart-pl011 80007000.uart: DMA channel RX dma0chan21 [ 2.105804] Waiting for root device /dev/mmcblk0p4... [ 2.134002] mmc3: new high speed MMC card at address 0001 [ 2.140319] mmcblk3: mmc3:0001 3.53 GiB [ 2.144744] mmcblk3boot0: mmc3:0001 partition 1 2.00 MiB [ 2.150573] mmcblk3boot1: mmc3:0001 partition 2 2.00 MiB [ 2.156341] mmcblk3rpmb: mmc3:0001 partition 3 128 KiB [ 2.163238] mmcblk3: p1 p2 p3 p4 cu: Got hangup signal Connected. cu: waitpid: No child processes Connected.
Disconnected.
[PYBOOT] [snowball 02:06]: Timed out waiting for "<type 'str'>":
[PYBOOT] [snowball 02:07]: got exception: timeout ~$off
[PYBOOT] [snowball 02:08]: Done. Board snowball-arm-multi_v7_nosmp_defconfig failure log: -------------------------------------------------
[ 1.902984] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.910491] ledtrig-cpu: registered to indicate activity on CPUs [ 1.916748] usbcore: registered new interface driver usbhid [ 1.922332] usbhid: USB HID core driver [ 1.929565] NET: Registered protocol family 10 [ 1.984893] sit: IPv6 over IPv4 tunneling driver [ 1.990051] NET: Registered protocol family 17 [ 1.994506] can: controller area network core (rev 20120528 abi 9) [ 2.000762] NET: Registered protocol family 29 [ 2.005218] can: raw protocol (rev 20120528) [ 2.009490] can: broadcast manager protocol (rev 20120528 t) [ 2.015136] can: netlink gateway (rev 20130117) max_hops=1 [ 2.021087] Key type dns_resolver registered [ 2.025543] ThumbEE CPU extension supported. [ 2.079895] input: gpio_keys as /devices/soc0/gpio_keys/input/input0 [ 2.094573] rtc-pl031 80154000.rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800) [ 2.103668] thermal cooling_device0: thermal-cpufreq-0 bind to 0: 0-succeed [ 2.110656] thermal cooling_device0: thermal-cpufreq-0 bind to 1: 0-succeed [ 2.117645] thermal cooling_device0: thermal-cpufreq-0 bind to 2: 0-succeed [ 2.124603] db8500-cpufreq-cooling soc:cpufreq-cooling: Cooling device registered: thermal-cpufreq-0 [ 2.136383] db8500-esram12: disabling [ 2.184173] db8500-esram34: disabling [ 2.207916] V-CSI/DSI: disabling [ 2.219146] mmci-reg: disabling [ 2.222747] uart-pl011 80007000.uart: DMA channel TX dma0chan20 [ 2.228729] uart-pl011 80007000.uart: DMA channel RX dma0chan21 [ 2.244903] Waiting for root device /dev/mmcblk0p4... [ 3.037811] mmc3: new high speed MMC card at address 0001 [ 3.049621] mmcblk3: mmc3:0001 3.53 GiB [ 3.059783] mmcblk3boot0: mmc3:0001 partition 1 2.00 MiB [ 3.069274] mmcblk3boot1: mmc3:0001 partition 2 2.00 MiB [ 3.083801] mmcblk3rpmb: mmc3:0001 partition 3 128 KiB [ 3.090637] mmcblk3: p1 p2 p3 p4
[PYBOOT] [snowball 02:02]: Timed out waiting for "<type 'str'>":
[PYBOOT] [snowball 02:03]: got exception: timeout ~$off
[PYBOOT] [snowball 02:04]: Done. Board snowball-arm-u8500_defconfig failure log: -------------------------------------------------
[ 2.696868] ux500-msp-i2s ux500-msp-i2s.1: Failed to get DMA channel capabilities, falling back to period counting: -6 [ 2.707885] snd-soc-mop500 snd-soc-mop500.0: ab8500-codec-dai.0 <-> ux500-msp-i2s.1 mapping ok [ 2.723785] ux500-msp-i2s ux500-msp-i2s.3: Failed to get DMA channel capabilities, falling back to period counting: -6 [ 2.734649] snd-soc-mop500 snd-soc-mop500.0: ab8500-codec-dai.1 <-> ux500-msp-i2s.3 mapping ok [ 2.772125] NET: Registered protocol family 10 [ 2.789642] sit: IPv6 over IPv4 tunneling driver [ 2.797485] NET: Registered protocol family 17 [ 2.802093] NET: Registered protocol family 35 [ 2.806610] NET: Registered protocol family 37 [ 2.811187] Registering SWP/SWPB emulation handler [ 2.817504] coresight-etm3x 801ae000.ptm: PTM 1.0 initialized [ 2.823822] coresight-etm3x 801af000.ptm: PTM 1.0 initialized [ 2.830444] input: gpio_keys as /devices/soc0/gpio_keys/input/input1 [ 2.845733] ab8500-rtc ab8500-rtc.0: setting system clock to 2000-04-10 22:03:40 UTC (955404220) [ 2.855072] thermal cooling_device0: thermal-cpufreq-0 bind to 0: 0-succeed [ 2.862152] thermal cooling_device0: thermal-cpufreq-0 bind to 1: 0-succeed [ 2.869171] thermal cooling_device0: thermal-cpufreq-0 bind to 2: 0-succeed [ 2.876190] db8500-cpufreq-cooling soc:cpufreq-cooling: Cooling device registered: thermal-cpufreq-0 [ 2.889831] db8500-esram12: disabling [ 2.893768] db8500-esram34: disabling [ 2.897674] V-CSI/DSI: disabling [ 2.900970] mmci-reg: disabling [ 2.904296] ALSA device list: [ 2.907257] #0: MOP500-card [ 2.910644] uart-pl011 80007000.uart: DMA channel TX dma0chan24 [ 2.916564] uart-pl011 80007000.uart: DMA channel RX dma0chan25 [ 2.922821] Waiting for root device /dev/mmcblk0p4... cu: Got hangup signal Connected. cu: waitpid: No child processes Connected.
Disconnected.
[PYBOOT] [snowball 01:53]: Timed out waiting for "<type 'str'>":
[PYBOOT] [snowball 01:54]: got exception: timeout ~$off
[PYBOOT] [snowball 01:55]: Done. Board wandboard-arm-imx_v6_v7_defconfig failure log: -------------------------------------------------
ing too fast: disabled for 5 minutes [ 20.089737] mmcblk0: error -110 sending status command, retrying [ 20.098250] mmcblk0: error -110 sending status command, retrying [ 20.106676] mmcblk0: error -110 sending status command, aborting INIT: cannot execute "/sbin/getty"INIT: cannot execute "/sbin/getty[ 20.119912] mmcblk0: error -110 sending status command, retrying " INIT: cannot execute "/sbin/[ 20.128774] mmcblk0: error -110 sending status command, retrying getty" INIT: Id "1" respawning[ 20.137540] mmcblk0: error -110 sending status command, aborting too fast: disabled for 5 minutes INIT: Id "5" respawning too [ 20.149091] mmcblk0: error -110 sending status command, retrying fast: disabled for 5 minutes [ 20.158157] mmcblk0: error -110 sending status command, retrying [ 20.166788] mmcblk0: error -110 sending status command, aborting [ 20.177842] mmcblk0: error -110 sending status command, retrying [ 20.186266] mmcblk0: error -110 sending status command, retrying [ 20.194691] mmcblk0: error -110 sending status command, aborting INIT: cannot execute "/sbin/getty" INIT: cannot execute "/sbin/getty" INIT: cannot execute "/sbin/getty" INIT: Id "3" respawning too fast: disabled for 5 minutes [ 20.232397] mmcblk0: error -110 sending status command, retrying [ 20.240925] mmcblk0: error -110 sending status command, retrying [ 20.249556] mmcblk0: error -110 sending status command, aborting [ 20.260636] mmcblk0: error -110 sending status command, retrying [ 20.269151] mmcblk0: error -110 sending status command, retrying [ 20.277580] mmcblk0: error -110 sending status command, aborting INIT: cannot execute "/sbin/getty"cannot execute "/sbin/getty" INIT: Id "4" respawning too fast: disabled for 5 minutes INIT: Id "S1" respawning too fast: disabled for 5 minutes INIT: no more processes left in this runlevel [ 50.035789] random: nonblocking pool is initialized
[PYBOOT] [wandboard 02:55]: Timed out waiting for "<type 'str'>":
[PYBOOT] [wandboard 02:56]: got exception: timeout ~$off
[PYBOOT] [wandboard 02:57]: Done.