Full logs are available at http://arm-soc.lixom.net/bootlogs/mainline/v4.7-rc1-247-g049ec1b/
Failed boards:
arndale multi_v7_nosmp_defconfig : NO BUILD bbb multi_v7_nosmp_defconfig : NO BUILD beagleboard-x15 multi_v7_nosmp_defconfig : NO BUILD beaver arm-tegra_defconfig : FAILED 1:48.61 beaver arm-multi_v7_defconfig : FAILED 1:54.72 beaver multi_v7_nosmp_defconfig : NO BUILD capri multi_v7_nosmp_defconfig : NO BUILD chitra powerpc-pasemi_defconfig : BUILD FAILED colibri-vf61 multi_v7_nosmp_defconfig : NO BUILD colombus multi_v7_nosmp_defconfig : NO BUILD cosmic multi_v7_nosmp_defconfig : NO BUILD cubie multi_v7_nosmp_defconfig : NO BUILD cubie2 multi_v7_nosmp_defconfig : NO BUILD cubox multi_v7_nosmp_defconfig : NO BUILD dalmore multi_v7_nosmp_defconfig : NO BUILD hummingboard multi_v7_nosmp_defconfig : NO BUILD jetsontk1 multi_v7_nosmp_defconfig : NO BUILD minnowmax minnowmax_defconfig : NO BUILD odroidu3 arm-exynos_defconfig : FAILED 1:49.51 omap5uevm arm-omap2plus_defconfig : FAILED 2:05.38 omap5uevm arm-multi_v7_defconfig : FAILED 2:06.68 omap5uevm arm-multi_lpae_defconfig : FAILED 2:13.14 omap5uevm multi_v7_nosmp_defconfig : NO BUILD pandaes multi_v7_nosmp_defconfig : NO BUILD parallella multi_v7_nosmp_defconfig : NO BUILD pi arm-exynos_defconfig : FAILED 0:32.72 pi arm-multi_v7_defconfig : FAILED 1:52.73 pi arm-multi_lpae_defconfig : FAILED 1:57.98 pi multi_v7_nosmp_defconfig : NO BUILD pit multi_v7_nosmp_defconfig : NO BUILD rk3288evb multi_v7_nosmp_defconfig : NO BUILD seaboard multi_v7_nosmp_defconfig : NO BUILD snow multi_v7_nosmp_defconfig : NO BUILD snowball multi_v7_nosmp_defconfig : NO BUILD socfpga multi_v7_nosmp_defconfig : NO BUILD trimslice multi_v7_nosmp_defconfig : NO BUILD wandboard arm-imx_v6_v7_defconfig : FAILED 2:58.23 wandboard multi_v7_nosmp_defconfig : NO BUILD
Successful boards:
apc arm-vt8500_v6_v7_defconfig : passed 1:12.19 arndale arm-exynos_defconfig : passed 1:34.97 arndale arm-multi_v7_defconfig : passed 1:26.09 arndale arm-multi_lpae_defconfig : passed 1:32.70 bbb arm-omap2plus_defconfig : passed 1:44.23 bbb arm-multi_v7_defconfig : passed 1:15.15 beagleboard-x15 arm-omap2plus_defconfig : warnings 0:51.04 beagleboard-x15 arm-multi_v7_defconfig : warnings 0:56.32 beagleboard-x15 arm-multi_lpae_defconfig : warnings 0:52.60 capri arm-bcm_defconfig : passed 0:45.08 capri arm-multi_v7_defconfig : passed 0:59.12 chitra powerpc-ppc64_defconfig : passed 2:16.35 colombus arm-sunxi_defconfig : passed 2:27.35 colombus arm-multi_v7_defconfig : passed 2:37.26 colombus arm-multi_lpae_defconfig : passed 2:32.86 cosmic arm-imx_v6_v7_defconfig : passed 3:22.71 cosmic arm-multi_v7_defconfig : passed 2:59.52 cubie arm-sunxi_defconfig : passed 0:58.53 cubie arm-multi_v7_defconfig : passed 0:54.48 cubie2 arm-sunxi_defconfig : passed 1:01.27 cubie2 arm-multi_v7_defconfig : passed 0:55.10 cubie2 arm-multi_lpae_defconfig : passed 1:08.89 cubox arm-multi_v7_defconfig : passed 1:26.96 cubox arm-mvebu_v7_defconfig : passed 1:12.55 dalmore arm-tegra_defconfig : warnings 1:26.55 dalmore arm-multi_v7_defconfig : warnings 1:29.11 dalmore arm-multi_lpae_defconfig : warnings 1:39.43 jetsontk1 arm-tegra_defconfig : warnings 0:52.68 jetsontk1 arm-multi_lpae_defconfig : warnings 0:47.76 parallella arm-multi_v7_defconfig : passed 2:57.58 pit arm-exynos_defconfig : passed 3:04.52 pit arm-multi_v7_defconfig : passed 2:20.43 pit arm-multi_lpae_defconfig : passed 2:14.56 seaboard arm-tegra_defconfig : warnings 1:01.61 seaboard arm-multi_v7_defconfig : warnings 1:08.24 seattle arm64-defconfig : passed 2:38.75 snow arm-exynos_defconfig : passed 2:14.95 snow arm-multi_v7_defconfig : passed 2:05.44 snow arm-multi_lpae_defconfig : passed 2:01.20 snowball arm-u8500_defconfig : passed 1:53.69 snowball arm-multi_v7_defconfig : passed 3:08.06 trimslice arm-multi_v7_defconfig : warnings 2:53.57 wandboard arm-multi_v7_defconfig : passed 1:07.79
Offline boards:
colibri-vf61 arm-imx_v6_v7_defconfig : OFFLINE 1:18.49 colibri-vf61 arm-multi_v7_defconfig : OFFLINE 1:22.65 hummingboard arm-imx_v6_v7_defconfig : OFFLINE 2:21.18 hummingboard arm-multi_v7_defconfig : OFFLINE 2:16.24 jetsontk1 arm-multi_v7_defconfig : OFFLINE 2:15.63 pandaes arm-omap2plus_defconfig : OFFLINE 2:14.71 pandaes arm-multi_v7_defconfig : OFFLINE 2:19.61 rk3288evb arm-multi_v7_defconfig : OFFLINE 0:50.09 rk3288evb arm-multi_lpae_defconfig : OFFLINE 0:43.70 sama5 arm-sama5_defconfig : OFFLINE 2:16.92 sama5d3-xplained arm-sama5_defconfig : OFFLINE 2:23.69 socfpga arm-socfpga_defconfig : OFFLINE 2:20.66 socfpga arm-multi_v7_defconfig : OFFLINE 2:16.20 trimslice arm-tegra_defconfig : OFFLINE 2:19.72
Board legend is available at http://arm-soc.lixom.net/boards.html
Last entries of failed logs below:
========================================================================
Board beaver-arm-multi_v7_defconfig failure log: -------------------------------------------------
[ 3.413055] pcieport 0000:00:01.0: Signaling PME through PCIe PME interrupt [ 3.420011] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt [ 3.426531] pcie_pme 0000:00:01.0:pcie001: service driver pcie_pme loaded [ 3.433476] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 3.439062] r8169 0000:01:00.0: enabling device (0140 -> 0143) [ 3.446064] r8169 0000:01:00.0 eth0: RTL8168evl/8111evl at 0xf09f2000, 02:04:4b:01:60:99, XID 0c900800 IRQ 375 [ 3.456062] r8169 0000:01:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko] [ 3.467287] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 3.473926] [drm] No driver support for vblank timestamp query. [ 3.479867] drm drm: No connectors reported connected with modes [ 3.485874] [drm] Cannot find any crtc or sizes - going 1024x768 [ 3.511072] Console: switching to colour frame buffer device 128x48 [ 3.523046] drm drm: fb0: frame buffer device [ 3.538352] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 3.549195] utmi_phy_clk_enable: timeout waiting for phy to stabilize [ 3.555660] tegra-ehci 7d004000.usb: EHCI Host Controller [ 3.561068] tegra-ehci 7d004000.usb: new USB bus registered, assigned bus number 1 [ 3.568892] tegra-ehci 7d004000.usb: irq 343, io mem 0x7d004000 [ 3.583361] tegra-ehci 7d004000.usb: USB 2.0 started, EHCI 1.00 [ 3.590122] hub 1-0:1.0: USB hub found [ 3.593895] hub 1-0:1.0: 1 port detected [ 3.598833] tegra-ehci 7d008000.usb: EHCI Host Controller [ 3.604243] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 2 [ 3.611980] tegra-ehci 7d008000.usb: irq 344, io mem 0x7d008000 [ 3.623354] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.00 [ 3.630010] hub 2-0:1.0: USB hub found [ 3.633778] hub 2-0:1.0: 1 port detected [ 3.642023] tps65910-rtc tps65910-rtc: setting system clock to 2000-01-01 00:00:02 UTC (946684802) [ 3.655698] vdd_sata,avdd_plle: disabling [ 3.660099] usb1_vbus: disabling [ 3.664186] Waiting for root device /dev/mmcblk0p1... [ 3.943360] usb 2-1: new high-speed USB device number 2 using tegra-ehci [ 4.881956] asix 2-1:1.0 eth1: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 58:6d:8f:50:ba:18
[PYBOOT] [beaver 01:52]: Timed out waiting for "<type 'str'>":
[PYBOOT] [beaver 01:53]: got exception: timeout ~$off
[PYBOOT] [beaver 01:54]: Done.
========================================================================
Board beaver-arm-tegra_defconfig failure log: -------------------------------------------------
[ 6.384204] pcie_pme 0000:00:01.0:pcie001: service driver pcie_pme loaded [ 6.391251] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 6.396853] r8169 0000:01:00.0: enabling device (0140 -> 0143) [ 6.404360] r8169 0000:01:00.0 eth0: RTL8168evl/8111evl at 0xf087e000, 02:04:4b:01:60:99, XID 0c900800 IRQ 375 [ 6.414361] r8169 0000:01:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko] [ 6.426955] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 6.433575] [drm] No driver support for vblank timestamp query. [ 6.439581] drm drm: No connectors reported connected with modes [ 6.445592] [drm] Cannot find any crtc or sizes - going 1024x768 [ 6.471441] Console: switching to colour frame buffer device 128x48 [ 6.483248] drm drm: fb0: frame buffer device [ 6.510773] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 6.520053] utmi_phy_clk_enable: timeout waiting for phy to stabilize [ 6.526529] tegra-ehci 7d004000.usb: EHCI Host Controller [ 6.531961] tegra-ehci 7d004000.usb: new USB bus registered, assigned bus number 1 [ 6.539937] tegra-ehci 7d004000.usb: irq 343, io mem 0x7d004000 [ 6.560780] tegra-ehci 7d004000.usb: USB 2.0 started, EHCI 1.00 [ 6.568379] hub 1-0:1.0: USB hub found [ 6.572158] hub 1-0:1.0: 1 port detected [ 6.576954] tegra-ehci 7d008000.usb: EHCI Host Controller [ 6.582379] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 2 [ 6.590250] tegra-ehci 7d008000.usb: irq 344, io mem 0x7d008000 [ 6.610776] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.00 [ 6.618250] hub 2-0:1.0: USB hub found [ 6.622025] hub 2-0:1.0: 1 port detected [ 6.630775] tps65910-rtc tps65910-rtc: setting system clock to 2000-01-01 00:00:02 UTC (946684802) [ 6.649003] vdd_sata,avdd_plle: disabling [ 6.653801] usb1_vbus: disabling [ 6.657208] ALSA device list: [ 6.660164] #0: NVIDIA Tegra Beaver [ 6.664404] Waiting for root device /dev/mmcblk0p1... [ 6.940781] usb 2-1: new high-speed USB device number 2 using tegra-ehci [ 7.926270] asix 2-1:1.0 eth1: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 58:6d:8f:50:ba:18
[PYBOOT] [beaver 01:46]: Timed out waiting for "<type 'str'>":
[PYBOOT] [beaver 01:47]: got exception: timeout ~$off
[PYBOOT] [beaver 01:48]: Done.
========================================================================
Board odroidu3-arm-exynos_defconfig failure log: -------------------------------------------------
[ 1.786746] sit: IPv6 over IPv4 tunneling driver [ 1.787212] NET: Registered protocol family 17 [ 1.790151] NET: Registered protocol family 15 [ 1.794628] Key type dns_resolver registered [ 1.798974] Registering SWP/SWPB emulation handler [ 1.806926] [drm] Exynos DRM: using 12c10000.mixer device for DMA mapping operations [ 1.811553] exynos-drm exynos-drm: bound 12c10000.mixer (ops mixer_component_ops) [ 1.818926] exynos-drm exynos-drm: bound 12d00000.hdmi (ops hdmi_component_ops) [ 1.826095] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 1.832651] [drm] No driver support for vblank timestamp query. [ 1.838569] [drm] Initialized exynos 1.0.0 20110530 on minor 0 [ 1.844911] s3c-rtc 10070000.rtc: rtc disabled, re-enabling [ 1.849960] s3c-rtc 10070000.rtc: warning: invalid RTC value so initializing it [ 1.857375] s3c-rtc 10070000.rtc: rtc core: registered s3c as rtc1 [ 1.864522] mmc_host mmc1: Bus speed (slot 0) = 44000000Hz (slot req 52000000Hz, actual 44000000HZ div = 0) [ 1.873316] mmc_host mmc1: Bus speed (slot 0) = 73333333Hz (slot req 52000000Hz, actual 36666666HZ div = 1) [ 1.883115] mmc1: new DDR MMC card at address 0001 [ 1.887077] max98090 1-0010: MAX98090 REVID=0x43 [ 1.889351] max98090 1-0010: use default 2.8v micbias [ 1.900978] asoc-simple-card sound: HiFi <-> 3830000.i2s mapping ok [ 1.903164] mmcblk1: mmc1:0001 008G92 7.28 GiB [ 1.903415] mmcblk1boot0: mmc1:0001 008G92 partition 1 4.00 MiB [ 1.908674] mmcblk1boot1: mmc1:0001 008G92 partition 2 4.00 MiB [ 1.908909] mmcblk1rpmb: mmc1:0001 008G92 partition 3 512 KiB [ 1.919896] mmcblk1: p1 p2 [ 1.931706] input: gpio_keys as /devices/platform/gpio_keys/input/input0 [ 1.968341] max77686-rtc max77686-rtc: setting system clock to 2000-01-01 01:00:19 UTC (946688419) [ 1.988310] VDD10_HDMI_1.0V: disabling [ 1.989024] vdd_g3d: disabling [ 1.990092] BUCK8_2.8V: disabling [ 1.994113] ALSA device list: [ 1.995701] #0: Odroid-U3 [ 1.999537] Waiting for root device /dev/mmcblk0p2...
[PYBOOT] [odroidu3 01:46]: Timed out waiting for "<type 'str'>":
[PYBOOT] [odroidu3 01:47]: got exception: timeout ~$off
[PYBOOT] [odroidu3 01:49]: Done.
========================================================================
Board omap5uevm-arm-multi_lpae_defconfig failure log: -------------------------------------------------
[ 1.947529] mmc0: new high speed MMC card at address 0001 [ 1.953469] smps9: Bringing 0uV into 2100000-2100000uV [ 1.959004] mmcblk0: mmc0:0001 SEM04G 3.69 GiB [ 1.963968] smsc95xx v1.0.4 [ 1.967001] mmcblk0boot0: mmc0:0001 SEM04G partition 1 2.00 MiB [ 1.973574] mmcblk0boot1: mmc0:0001 SEM04G partition 2 2.00 MiB [ 1.981823] ldo1: Bringing 0uV into 1800000-1800000uV [ 1.988338] ldo2: Bringing 0uV into 2800000-2800000uV [ 1.996322] ldo4: Bringing 0uV into 1800000-1800000uV [ 2.007413] ldo7: Bringing 0uV into 2000000-2000000uV [ 2.015553] ldo9: bypassed regulator has no supply! [ 2.020680] ldo9: failed to get the current voltage(-517) [ 2.026355] palmas-pmic 48070000.i2c:palmas@48:palmas_pmic: failed to register 48070000.i2c:palmas@48:palmas_pmic regulator [ 2.030944] smsc95xx 1-3:1.0 eth0: register 'smsc95xx' at usb-4a064c00.ehci-3, smsc95xx USB 2.0 Ethernet, fa:05:d5:1a:c6:d0 [ 2.053390] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 2.079192] omap_i2c 4807c000.i2c: bus 4 rev0.12 at 400 kHz [ 2.085593] omap-dwc3 4a020000.omap_dwc3: vbus init failed [ 2.112115] smps9: Bringing 0uV into 2100000-2100000uV [ 2.130794] ldo9: bypassed regulator has no supply! [ 2.135907] ldo9: failed to get the current voltage(-517) [ 2.141580] palmas-pmic 48070000.i2c:palmas@48:palmas_pmic: failed to register 48070000.i2c:palmas@48:palmas_pmic regulator [ 2.156141] palmas-rtc 48070000.i2c:palmas@48:rtc: setting system clock to 2000-01-01 00:02:29 UTC (946684949) [ 2.171800] pbias_mmc_omap5: disabling [ 2.175743] vmmcsdio_fixed: disabling [ 2.180277] Waiting for root device /dev/mmcblk1p2... [ 2.258445] usb 1-2: new high-speed USB device number 3 using ehci-omap [ 2.394358] hub 1-2:1.0: USB hub found [ 2.398374] hub 1-2:1.0: 3 ports detected [ 2.404247] omap-dwc3 4a020000.omap_dwc3: vbus init failed [ 2.432229] smps9: Bringing 0uV into 2100000-2100000uV [ 2.450861] ldo9: bypassed regulator has no supply! [ 2.455980] ldo9: failed to get the current voltage(-517) [ 2.461645] palmas-pmic 48070000.i2c:palmas@48:palmas_pmic: failed to register 48070000.i2c:palmas@48:palmas_pmic regulator
[PYBOOT] [omap5uevm 02:10]: Timed out waiting for "<type 'str'>":
[PYBOOT] [omap5uevm 02:11]: got exception: timeout ~$off
[PYBOOT] [omap5uevm 02:12]: Done.
========================================================================
Board omap5uevm-arm-multi_v7_defconfig failure log: -------------------------------------------------
[ 1.935904] mmc0: new high speed MMC card at address 0001 [ 1.941746] mmcblk0: mmc0:0001 SEM04G 3.69 GiB [ 1.946701] mmcblk0boot0: mmc0:0001 SEM04G partition 1 2.00 MiB [ 1.953363] mmcblk0boot1: mmc0:0001 SEM04G partition 2 2.00 MiB [ 1.959969] smsc95xx v1.0.4 [ 1.966247] smps9: Bringing 0uV into 2100000-2100000uV [ 1.974372] ldo1: Bringing 0uV into 1800000-1800000uV [ 1.980911] ldo2: Bringing 0uV into 2800000-2800000uV [ 1.988924] ldo4: Bringing 0uV into 1800000-1800000uV [ 2.000080] ldo7: Bringing 0uV into 2000000-2000000uV [ 2.008257] ldo9: bypassed regulator has no supply! [ 2.013374] ldo9: failed to get the current voltage(-517) [ 2.015699] smsc95xx 1-3:1.0 eth0: register 'smsc95xx' at usb-4a064c00.ehci-3, smsc95xx USB 2.0 Ethernet, fa:e0:cf:00:27:de [ 2.030721] palmas-pmic 48070000.i2c:palmas@48:palmas_pmic: failed to register 48070000.i2c:palmas@48:palmas_pmic regulator [ 2.046072] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 2.071968] omap_i2c 4807c000.i2c: bus 4 rev0.12 at 400 kHz [ 2.078351] omap-dwc3 4a020000.omap_dwc3: vbus init failed [ 2.105051] smps9: Bringing 0uV into 2100000-2100000uV [ 2.124012] ldo9: bypassed regulator has no supply! [ 2.129132] ldo9: failed to get the current voltage(-517) [ 2.134796] palmas-pmic 48070000.i2c:palmas@48:palmas_pmic: failed to register 48070000.i2c:palmas@48:palmas_pmic regulator [ 2.149398] palmas-rtc 48070000.i2c:palmas@48:rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800) [ 2.165072] pbias_mmc_omap5: disabling [ 2.169036] vmmcsdio_fixed: disabling [ 2.173576] Waiting for root device /dev/mmcblk1p2... [ 2.256192] usb 1-2: new high-speed USB device number 3 using ehci-omap [ 2.391983] hub 1-2:1.0: USB hub found [ 2.396000] hub 1-2:1.0: 3 ports detected [ 2.401944] omap-dwc3 4a020000.omap_dwc3: vbus init failed [ 2.430083] smps9: Bringing 0uV into 2100000-2100000uV [ 2.449043] ldo9: bypassed regulator has no supply! [ 2.454160] ldo9: failed to get the current voltage(-517) [ 2.459828] palmas-pmic 48070000.i2c:palmas@48:palmas_pmic: failed to register 48070000.i2c:palmas@48:palmas_pmic regulator
[PYBOOT] [omap5uevm 02:03]: Timed out waiting for "<type 'str'>":
[PYBOOT] [omap5uevm 02:04]: got exception: timeout ~$off
[PYBOOT] [omap5uevm 02:05]: Done.
========================================================================
Board omap5uevm-arm-omap2plus_defconfig failure log: -------------------------------------------------
[ 3.905080] ldo9: bypassed regulator has no supply! [ 3.910215] ldo9: failed to get the current voltage(-517) [ 3.915877] palmas-pmic 48070000.i2c:palmas@48:palmas_pmic: failed to register 48070000.i2c:palmas@48:palmas_pmic regulator [ 3.938810] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 3.946378] omap_i2c 4807c000.i2c: bus 4 rev0.12 at 400 kHz [ 3.952960] omap_hsmmc 4809c000.mmc: GPIO lookup for consumer cd [ 3.959272] omap_hsmmc 4809c000.mmc: using device tree for GPIO lookup [ 3.966116] of_get_named_gpiod_flags: can't parse 'cd-gpios' property of node '/ocp/mmc@4809c000[0]' [ 3.975709] of_get_named_gpiod_flags: can't parse 'cd-gpio' property of node '/ocp/mmc@4809c000[0]' [ 3.985207] omap_hsmmc 4809c000.mmc: using lookup tables for GPIO lookup [ 3.992260] omap_hsmmc 4809c000.mmc: lookup for GPIO cd failed [ 3.998385] omap_hsmmc 4809c000.mmc: GPIO lookup for consumer wp [ 4.004681] omap_hsmmc 4809c000.mmc: using device tree for GPIO lookup [ 4.011545] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@4809c000[0]' [ 4.021129] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@4809c000[0]' [ 4.030621] omap_hsmmc 4809c000.mmc: using lookup tables for GPIO lookup [ 4.037641] omap_hsmmc 4809c000.mmc: lookup for GPIO wp failed [ 4.078548] omap_hsmmc 480ad000.mmc: GPIO lookup for consumer wp [ 4.084842] omap_hsmmc 480ad000.mmc: using device tree for GPIO lookup [ 4.091705] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@480ad000[0]' [ 4.101294] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@480ad000[0]' [ 4.110794] omap_hsmmc 480ad000.mmc: using lookup tables for GPIO lookup [ 4.117829] omap_hsmmc 480ad000.mmc: lookup for GPIO wp failed [ 4.138262] smps9: Bringing 0uV into 2100000-2100000uV [ 4.166641] ldo9: bypassed regulator has no supply! [ 4.171771] ldo9: failed to get the current voltage(-517) [ 4.177432] palmas-pmic 48070000.i2c:palmas@48:palmas_pmic: failed to register 48070000.i2c:palmas@48:palmas_pmic regulator [ 4.197541] hctosys: unable to open rtc device (rtc0) [ 4.202854] sr_init: No PMIC hook to init smartreflex [ 4.208353] sr_init: platform driver register failed for SR [ 4.235873] pbias_mmc_omap5: disabling [ 4.239837] vmmcsdio_fixed: disabling [ 4.245986] Waiting for root device /dev/mmcblk1p2...
[PYBOOT] [omap5uevm 02:02]: Timed out waiting for "<type 'str'>":
[PYBOOT] [omap5uevm 02:03]: got exception: timeout ~$off
[PYBOOT] [omap5uevm 02:04]: Done.
========================================================================
Board pi-arm-exynos_defconfig failure log: -------------------------------------------------
[ 3.142095] exynos-drm exynos-drm: fb0: frame buffer device [ 3.160124] [drm] Initialized exynos 1.0.0 20110530 on minor 0 [ 3.165159] input: gpio-keys as /devices/platform/gpio-keys/input/input2 [ 3.172600] max77686-rtc max77802-rtc: hctosys: unable to read the hardware clock [ 3.194951] vdd_1v2_2: disabling [ 3.196883] TPS65090_RAILSDCDC3: disabling [ 3.200807] TPS65090_RAILSLDO1: disabling [ 3.204769] TPS65090_RAILSLDO2: disabling [ 3.209292] ALSA device list: [ 3.211728] #0: Peach-Pi-I2S-MAX98091 [ 3.216856] EXT4-fs (mmcblk0p1): couldn't mount as ext3 due to feature incompatibilities [ 3.232502] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null) [ 3.239182] VFS: Mounted root (ext4 filesystem) readonly on device 179:1. [ 3.248315] devtmpfs: mounted [ 3.250379] Freeing unused kernel memory: 1024K (c0a00000 - c0b00000)
[PYBOOT] [pi 00:29]: kernel: finished booting, starting userspace. [ 3.260452] Unhandled fault: imprecise external abort (0x1406) at 0x00000000 [ 3.266013] pgd = edbc8000 [ 3.268703] [00000000] *pgd=fb82c835 [ 3.280180] Kernel panic - not syncing: Attempted to kill init! exitcode=0x00000007 [ 3.280180] [ 3.287825] CPU: 0 PID: 1 Comm: init Not tainted 4.7.0-rc1-00247-g049ec1b #1 [ 3.294849] Hardware name: SAMSUNG EXYNOS (Flattened Device Tree) [ 3.300943] [<c010dfec>] (unwind_backtrace) from [<c010ad18>] (show_stack+0x10/0x14) [ 3.308648] [<c010ad18>] (show_stack) from [<c03264b8>] (dump_stack+0x78/0x8c) [ 3.315850] [<c03264b8>] (dump_stack) from [<c01966c0>] (panic+0xd8/0x250) [ 3.322703] [<c01966c0>] (panic) from [<c011e6a0>] (do_exit+0xa10/0xa34) [ 3.329379] [<c011e6a0>] (do_exit) from [<c011f27c>] (do_group_exit+0x3c/0xbc) [ 3.336581] [<c011f27c>] (do_group_exit) from [<c012875c>] (get_signal+0x220/0x5a4) [ 3.344213] [<c012875c>] (get_signal) from [<c010a460>] (do_signal+0xc4/0x418) [ 3.351414] [<c010a460>] (do_signal) from [<c010a958>] (do_work_pending+0x94/0xa4) [ 3.358961] [<c010a958>] (do_work_pending) from [<c0107714>] (slow_work_pending+0xc/0x20) [ 3.367127] ---[ end Kernel panic - not syncing: Attempted to kill init! exitcode=0x00000007 [ 3.367127]
[PYBOOT] [pi 00:30]: got exception: panic ~$off
[PYBOOT] [pi 00:31]: Done.
========================================================================
Board pi-arm-multi_lpae_defconfig failure log: -------------------------------------------------
[ 1.539058] isl29018 7-0044: No cache defaults, reading back from HW [ 1.545413] isl29018 7-0044: Failed to read 1: -6 [ 1.549998] isl29018 7-0044: regmap initialization fails: -6 [ 1.560930] NET: Registered protocol family 10 [ 1.565371] sit: IPv6 over IPv4 tunneling driver [ 1.568948] NET: Registered protocol family 17 [ 1.572957] can: controller area network core (rev 20120528 abi 9) [ 1.579147] NET: Registered protocol family 29 [ 1.583534] can: raw protocol (rev 20120528) [ 1.587784] can: broadcast manager protocol (rev 20120528 t) [ 1.593426] can: netlink gateway (rev 20130117) max_hops=1 [ 1.599148] Key type dns_resolver registered [ 1.603478] ThumbEE CPU extension supported. [ 1.607395] Registering SWP/SWPB emulation handler [ 1.617349] dwmmc_exynos 12210000.mmc: IDMAC supports 32-bit address mode. [ 1.622825] dwmmc_exynos 12210000.mmc: Using internal DMA controller. [ 1.629192] dwmmc_exynos 12210000.mmc: Version ID is 250a [ 1.634567] dwmmc_exynos 12210000.mmc: DW MMC controller at irq 70,64 bit host data width,64 deep fifo [ 1.644659] input: gpio-keys as /devices/platform/gpio-keys/input/input1 [ 1.655053] dwmmc_exynos 12210000.mmc: IDMAC supports 32-bit address mode. [ 1.660503] mmc_host mmc0: Bus speed (slot 0) = 200000000Hz (slot req 200000000Hz, actual 200000000HZ div = 0) [ 1.670688] dwmmc_exynos 12210000.mmc: Using internal DMA controller. [ 1.676869] dwmmc_exynos 12210000.mmc: Version ID is 250a [ 1.682246] dwmmc_exynos 12210000.mmc: DW MMC controller at irq 70,64 bit host data width,64 deep fifo [ 1.691959] max77686-rtc max77802-rtc: hctosys: unable to read the hardware clock [ 1.714304] Waiting for root device /dev/mmcblk0p1... [ 1.718189] mmc0: tuning execution failed: -5 [ 1.722243] mmc0: error -5 whilst initialising MMC card [ 2.583850] asix 1-1:1.0 eth0: register 'asix' at usb-xhci-hcd.2.auto-1, ASIX AX88772 USB 2.0 Ethernet, c8:b3:73:46:fb:95 [ 2.598058] dwmmc_exynos 12210000.mmc: IDMAC supports 32-bit address mode. [ 2.603515] dwmmc_exynos 12210000.mmc: Using internal DMA controller. [ 2.609888] dwmmc_exynos 12210000.mmc: Version ID is 250a [ 2.615272] dwmmc_exynos 12210000.mmc: DW MMC controller at irq 70,64 bit host data width,64 deep fifo
[PYBOOT] [pi 01:55]: Timed out waiting for "<type 'str'>":
[PYBOOT] [pi 01:56]: got exception: timeout ~$off
[PYBOOT] [pi 01:57]: Done.
========================================================================
Board pi-arm-multi_v7_defconfig failure log: -------------------------------------------------
[ 1.539061] isl29018 7-0044: No cache defaults, reading back from HW [ 1.545413] isl29018 7-0044: Failed to read 1: -6 [ 1.549997] isl29018 7-0044: regmap initialization fails: -6 [ 1.560934] NET: Registered protocol family 10 [ 1.565371] sit: IPv6 over IPv4 tunneling driver [ 1.568950] NET: Registered protocol family 17 [ 1.572957] can: controller area network core (rev 20120528 abi 9) [ 1.579148] NET: Registered protocol family 29 [ 1.583535] can: raw protocol (rev 20120528) [ 1.587784] can: broadcast manager protocol (rev 20120528 t) [ 1.593427] can: netlink gateway (rev 20130117) max_hops=1 [ 1.599154] Key type dns_resolver registered [ 1.603485] ThumbEE CPU extension supported. [ 1.607395] Registering SWP/SWPB emulation handler [ 1.617362] dwmmc_exynos 12210000.mmc: IDMAC supports 32-bit address mode. [ 1.622844] dwmmc_exynos 12210000.mmc: Using internal DMA controller. [ 1.629210] dwmmc_exynos 12210000.mmc: Version ID is 250a [ 1.634584] dwmmc_exynos 12210000.mmc: DW MMC controller at irq 70,64 bit host data width,64 deep fifo [ 1.644679] input: gpio-keys as /devices/platform/gpio-keys/input/input1 [ 1.655087] dwmmc_exynos 12210000.mmc: IDMAC supports 32-bit address mode. [ 1.660539] mmc_host mmc0: Bus speed (slot 0) = 200000000Hz (slot req 200000000Hz, actual 200000000HZ div = 0) [ 1.670723] dwmmc_exynos 12210000.mmc: Using internal DMA controller. [ 1.676904] dwmmc_exynos 12210000.mmc: Version ID is 250a [ 1.682281] dwmmc_exynos 12210000.mmc: DW MMC controller at irq 70,64 bit host data width,64 deep fifo [ 1.691991] max77686-rtc max77802-rtc: hctosys: unable to read the hardware clock [ 1.714342] Waiting for root device /dev/mmcblk0p1... [ 1.718220] mmc0: tuning execution failed: -5 [ 1.722278] mmc0: error -5 whilst initialising MMC card [ 2.583830] asix 1-1:1.0 eth0: register 'asix' at usb-xhci-hcd.2.auto-1, ASIX AX88772 USB 2.0 Ethernet, c8:b3:73:46:fb:95 [ 2.598025] dwmmc_exynos 12210000.mmc: IDMAC supports 32-bit address mode. [ 2.603489] dwmmc_exynos 12210000.mmc: Using internal DMA controller. [ 2.609862] dwmmc_exynos 12210000.mmc: Version ID is 250a [ 2.615247] dwmmc_exynos 12210000.mmc: DW MMC controller at irq 70,64 bit host data width,64 deep fifo
[PYBOOT] [pi 01:50]: Timed out waiting for "<type 'str'>":
[PYBOOT] [pi 01:51]: got exception: timeout ~$off
[PYBOOT] [pi 01:52]: Done.
========================================================================
Board wandboard-arm-imx_v6_v7_defconfig failure log: -------------------------------------------------
[ 20.004421] mmcblk0: error -110 sending status command, aborting [ 20.015555] mmcblk0: error -110 sending status command, retrying [ 20.023971] mmcblk0: error -110 sending status command, retrying [ 20.032427] mmcblk0: error -110 sending status command, aborting [ 20.043542] mmcblk0: error -110 sending status command, retrying [ 20.052004] mmcblk0: error -110 sending status command, retrying [ 20.060461] mmcblk0: error -110 sending status command, aborting [ 20.071494] mmcblk0: error -110 sending status command, retrying [ 20.079940] mmcblk0: error -110 sending status command, retrying [ 20.088400] mmcblk0: error -110 sending status command, aborting INIT: INIT: cannot execute "/sbin/getty"cannot execute "/sbin/getty"ca[ 20.102560] mmcblk0: error -110 sending status command, retrying nnot execute "/sbin/getty"
[ 20.111426] mmcblk0: error -110 sending status command, retrying INIT: Id "2" respawning too fast:[ 20.120325] mmcblk0: error -110 sending status command, aborting disabled for 5 minutes INIT: Id "6" respawning too fast: disa[ 20.131851] mmcblk0: error -110 sending status command, retrying bled for 5 minutes [ 20.140878] mmcblk0: error -110 sending status command, retrying [ 20.149332] mmcblk0: error -110 sending status command, aborting INIT: INIT: INIT: cannot execute "/sbin/getty"cannot execute "/sbin/getty"cannot execute "/sbin/getty"
INIT: Id "1" respawning too fast: disabled for 5 minutes INIT: Id "5" respawning too fast: disabled for 5 minutes INIT: Id "S1" respawning too fast: disabled for 5 minutes [ 20.270872] mmcblk0: error -110 sending status command, retrying [ 20.279336] mmcblk0: error -110 sending status command, retrying [ 20.287804] mmcblk0: error -110 sending status command, aborting INIT: cannot execute "/sbin/getty" INIT: Id "3" respawning too fast: disabled for 5 minutes INIT: no more processes left in this runlevel [ 47.474744] random: nonblocking pool is initialized
[PYBOOT] [wandboard 02:55]: Timed out waiting for "<type 'str'>":
[PYBOOT] [wandboard 02:56]: got exception: timeout ~$off
[PYBOOT] [wandboard 02:57]: Done.