Failed boards:
cubie2 sunxi_defconfig : FAILED 1:23.86 cubie2 multi_v7_defconfig : FAILED 1:39.03 cubie2 multi_lpae_defconfig : FAILED 1:21.97 cubox multi_v7_defconfig : FAILED 1:37.90 omap5uevm omap2plus_defconfig : FAILED 1:46.26 omap5uevm multi_v7_defconfig : FAILED 1:53.24 omap5uevm multi_lpae_defconfig : FAILED 1:49.07 snow multi_lpae_defconfig : FAILED 1:13.78 snowball u8500_defconfig : FAILED 1:55.74
Successful boards:
apc vt8500_v6_v7_defconfig : passed 1:15.54 arndale exynos_defconfig : passed 1:16.69 arndale multi_v7_defconfig : passed 1:43.59 arndale multi_lpae_defconfig : passed 1:35.67 bbb omap2plus_defconfig : passed 1:32.14 bbb multi_v7_defconfig : passed 1:30.28 beaver tegra_defconfig : passed 0:57.03 beaver multi_v7_defconfig : passed 1:06.77 capri bcm_defconfig : passed 0:39.20 capri multi_v7_defconfig : passed 0:41.37 cubie sunxi_defconfig : passed 1:16.00 cubie multi_v7_defconfig : passed 1:37.24 dalmore tegra_defconfig : passed 1:33.63 dalmore multi_v7_defconfig : passed 1:23.19 dalmore multi_lpae_defconfig : passed 1:19.05 hummingboard imx_v6_v7_defconfig : passed 1:25.66 hummingboard multi_v7_defconfig : passed 1:27.68 jetson tegra_defconfig : passed 1:03.95 jetson multi_v7_defconfig : passed 1:07.31 jetson multi_lpae_defconfig : passed 0:56.39 panda omap2plus_defconfig : warnings 1:32.33 panda multi_v7_defconfig : warnings 2:02.05 sama5 sama5_defconfig : passed 1:56.56 seaboard tegra_defconfig : passed 1:57.56 seaboard multi_v7_defconfig : passed 1:08.03 snow exynos_defconfig : passed 1:24.65 snow multi_v7_defconfig : passed 1:23.40 snowball multi_v7_defconfig : passed 3:04.05 trimslice tegra_defconfig : passed 1:07.41 trimslice multi_v7_defconfig : passed 1:09.58 wandboard imx_v6_v7_defconfig : passed 1:08.28 wandboard multi_v7_defconfig : passed 1:06.31
Offline boards:
Board legend is available at http://arm-soc.lixom.net/boards.html
Last entries of failed logs below:
========================================================================
Board cubie2-multi_lpae_defconfig failure log: -------------------------------------------------
[ 1.324245] ahci-sunxi 1c18000.sata: AHCI 0001.0100 32 slots 1 ports 3 Gbps 0x1 impl platform mode [ 1.333215] ahci-sunxi 1c18000.sata: flags: ncq sntf pm led clo only pio slum part ccc [ 1.342752] scsi0 : ahci_platform [ 1.346467] ata1: SATA max UDMA/133 mmio [mem 0x01c18000-0x01c18fff] port 0x100 irq 88 [ 1.355205] ehci-platform 1c14000.usb: EHCI Host Controller [ 1.360851] ehci-platform 1c14000.usb: new USB bus registered, assigned bus number 1 [ 1.368911] ehci-platform 1c14000.usb: irq 71, io mem 0x01c14000 [ 1.375124] mmc0: new high speed SDHC card at address aaaa [ 1.380999] ehci-platform 1c14000.usb: USB 2.0 started, EHCI 1.00 [ 1.387277] mmcblk0: mmc0:aaaa SU16G 14.8 GiB [ 1.392835] hub 1-0:1.0: USB hub found [ 1.397072] hub 1-0:1.0: 1 port detected [ 1.401168] mmcblk0: p1 [ 1.405455] ehci-platform 1c1c000.usb: EHCI Host Controller [ 1.411144] ehci-platform 1c1c000.usb: new USB bus registered, assigned bus number 2 [ 1.419124] ehci-platform 1c1c000.usb: irq 72, io mem 0x01c1c000 [ 1.430520] ehci-platform 1c1c000.usb: USB 2.0 started, EHCI 1.00 [ 1.437493] hub 2-0:1.0: USB hub found [ 1.441347] hub 2-0:1.0: 1 port detected [ 1.446363] ohci-platform 1c14400.usb: Generic Platform OHCI controller [ 1.453058] ohci-platform 1c14400.usb: new USB bus registered, assigned bus number 3 [ 1.460898] ohci-platform 1c14400.usb: irq 96, io mem 0x01c14400 [ 1.525384] hub 3-0:1.0: USB hub found [ 1.529238] hub 3-0:1.0: 1 port detected [ 1.534245] ohci-platform 1c1c400.usb: Generic Platform OHCI controller [ 1.540959] ohci-platform 1c1c400.usb: new USB bus registered, assigned bus number 4 [ 1.548819] ohci-platform 1c1c400.usb: irq 97, io mem 0x01c1c400 [ 1.610336] hub 4-0:1.0: USB hub found [ 1.614173] hub 4-0:1.0: 1 port detected [ 1.618843] sunxi-rtc 1c20d00.rtc: setting system clock to 1970-01-01 00:00:14 UTC (14) [ 1.706410] No MAC Management Counters available [ 1.711181] stmmac_open: ERROR: allocating the WoL IRQ -61 (-22) [ 1.717806] IP-Config: Failed to open eth0 [ 1.721925] IP-Config: No network devices available [ 1.726840] vcc3v0: disabling [ 1.729921] ALSA device list: [ 1.732902] No soundcards found. [ 1.737048] ata1: SATA link down (SStatus 0 SControl 300) ~$off # PYBOOT: Exception: timeout
========================================================================
Board cubie2-multi_v7_defconfig failure log: -------------------------------------------------
[ 1.319681] ahci-sunxi 1c18000.sata: AHCI 0001.0100 32 slots 1 ports 3 Gbps 0x1 impl platform mode [ 1.328650] ahci-sunxi 1c18000.sata: flags: ncq sntf pm led clo only pio slum part ccc [ 1.338225] scsi0 : ahci_platform [ 1.341939] ata1: SATA max UDMA/133 mmio [mem 0x01c18000-0x01c18fff] port 0x100 irq 88 [ 1.350681] ehci-platform 1c14000.usb: EHCI Host Controller [ 1.356333] ehci-platform 1c14000.usb: new USB bus registered, assigned bus number 1 [ 1.364385] ehci-platform 1c14000.usb: irq 71, io mem 0x01c14000 [ 1.370585] mmc0: new high speed SDHC card at address aaaa [ 1.376453] ehci-platform 1c14000.usb: USB 2.0 started, EHCI 1.00 [ 1.382725] mmcblk0: mmc0:aaaa SU16G 14.8 GiB [ 1.388282] hub 1-0:1.0: USB hub found [ 1.392513] hub 1-0:1.0: 1 port detected [ 1.396602] mmcblk0: p1 [ 1.400915] ehci-platform 1c1c000.usb: EHCI Host Controller [ 1.406625] ehci-platform 1c1c000.usb: new USB bus registered, assigned bus number 2 [ 1.414602] ehci-platform 1c1c000.usb: irq 72, io mem 0x01c1c000 [ 1.425944] ehci-platform 1c1c000.usb: USB 2.0 started, EHCI 1.00 [ 1.432962] hub 2-0:1.0: USB hub found [ 1.436802] hub 2-0:1.0: 1 port detected [ 1.441805] ohci-platform 1c14400.usb: Generic Platform OHCI controller [ 1.448491] ohci-platform 1c14400.usb: new USB bus registered, assigned bus number 3 [ 1.456332] ohci-platform 1c14400.usb: irq 96, io mem 0x01c14400 [ 1.520784] hub 3-0:1.0: USB hub found [ 1.524652] hub 3-0:1.0: 1 port detected [ 1.529689] ohci-platform 1c1c400.usb: Generic Platform OHCI controller [ 1.536411] ohci-platform 1c1c400.usb: new USB bus registered, assigned bus number 4 [ 1.544254] ohci-platform 1c1c400.usb: irq 97, io mem 0x01c1c400 [ 1.605771] hub 4-0:1.0: USB hub found [ 1.609613] hub 4-0:1.0: 1 port detected [ 1.614290] sunxi-rtc 1c20d00.rtc: setting system clock to 1970-01-01 00:00:14 UTC (14) [ 1.701825] No MAC Management Counters available [ 1.706599] stmmac_open: ERROR: allocating the WoL IRQ -61 (-22) [ 1.713216] IP-Config: Failed to open eth0 [ 1.717335] IP-Config: No network devices available [ 1.722250] vcc3v0: disabling [ 1.725331] ALSA device list: [ 1.728313] No soundcards found. [ 1.732453] ata1: SATA link down (SStatus 0 SControl 300) ~$off # PYBOOT: Exception: timeout
========================================================================
Board cubie2-sunxi_defconfig failure log: -------------------------------------------------
[ 0.993887] mmc0: new high speed SDHC card at address aaaa [ 0.999816] mmcblk0: mmc0:aaaa SU16G 14.8 GiB [ 1.005816] mmcblk0: p1 [ 1.016080] ahci-sunxi 1c18000.sata: controller can't do PMP, turning off CAP_PMP [ 1.023562] ahci-sunxi 1c18000.sata: forcing PORTS_IMPL to 0x1 [ 1.029474] ahci-sunxi 1c18000.sata: AHCI 0001.0100 32 slots 1 ports 3 Gbps 0x1 impl platform mode [ 1.038448] ahci-sunxi 1c18000.sata: flags: ncq sntf pm led clo only pio slum part ccc [ 1.047335] scsi0 : ahci_platform [ 1.050980] ata1: SATA max UDMA/133 mmio [mem 0x01c18000-0x01c18fff] port 0x100 irq 88 [ 1.059250] ehci-platform 1c14000.usb: EHCI Host Controller [ 1.064853] ehci-platform 1c14000.usb: new USB bus registered, assigned bus number 1 [ 1.072722] ehci-platform 1c14000.usb: irq 71, io mem 0x01c14000 [ 1.096001] ehci-platform 1c14000.usb: USB 2.0 started, EHCI 1.00 [ 1.102978] hub 1-0:1.0: USB hub found [ 1.106818] hub 1-0:1.0: 1 port detected [ 1.111298] ehci-platform 1c1c000.usb: EHCI Host Controller [ 1.116937] ehci-platform 1c1c000.usb: new USB bus registered, assigned bus number 2 [ 1.124782] ehci-platform 1c1c000.usb: irq 72, io mem 0x01c1c000 [ 1.145992] ehci-platform 1c1c000.usb: USB 2.0 started, EHCI 1.00 [ 1.152891] hub 2-0:1.0: USB hub found [ 1.156724] hub 2-0:1.0: 1 port detected [ 1.161165] ohci-platform 1c14400.usb: Generic Platform OHCI controller [ 1.167843] ohci-platform 1c14400.usb: new USB bus registered, assigned bus number 3 [ 1.175688] ohci-platform 1c14400.usb: irq 96, io mem 0x01c14400 [ 1.240817] hub 3-0:1.0: USB hub found [ 1.244617] hub 3-0:1.0: 1 port detected [ 1.249127] ohci-platform 1c1c400.usb: Generic Platform OHCI controller [ 1.255759] ohci-platform 1c1c400.usb: new USB bus registered, assigned bus number 4 [ 1.263630] ohci-platform 1c1c400.usb: irq 97, io mem 0x01c1c400 [ 1.330863] hub 4-0:1.0: USB hub found [ 1.334651] hub 4-0:1.0: 1 port detected [ 1.339021] sunxi-rtc 1c20d00.rtc: setting system clock to 1970-01-01 00:00:16 UTC (16) [ 1.426021] ata1: SATA link down (SStatus 0 SControl 300) [ 1.442320] No MAC Management Counters available [ 1.447087] stmmac_open: ERROR: allocating the WoL IRQ -61 (-22) [ 1.453687] IP-Config: Failed to open eth0 [ 1.457809] IP-Config: No network devices available [ 1.462709] vcc3v0: disabling ~$off # PYBOOT: Exception: timeout
========================================================================
Board cubox-multi_v7_defconfig failure log: -------------------------------------------------
[ 1.240353] SPEAr-ehci: EHCI SPEAr driver [ 1.244455] tegra-ehci: Tegra EHCI driver [ 1.248583] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.254766] ohci-pci: OHCI PCI platform driver [ 1.259263] ohci-platform: OHCI generic platform driver [ 1.264585] ohci-omap3: OHCI OMAP3 driver [ 1.268686] SPEAr-ohci: OHCI SPEAr driver [ 1.273420] usbcore: registered new interface driver usb-storage [ 1.280923] mousedev: PS/2 mouse device common for all mice [ 1.287923] rtc-mv f10d8500.real-time-clock: rtc core: registered f10d8500.real-time- as rtc0 [ 1.297259] i2c /dev entries driver [ 1.303260] usbcore: registered new interface driver uvcvideo [ 1.309019] USB Video Class driver (1.1.1) [ 1.313120] gspca_main: v2.14.0 registered [ 1.320336] orion_wdt: Initial timeout 25 sec [ 1.325807] sdhci: Secure Digital Host Controller Interface driver [ 1.331973] sdhci: Copyright(c) Pierre Ossman [ 1.337026] Synopsys Designware Multimedia Card Interface Driver [ 1.343523] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.349921] usbcore: registered new interface driver usbhid [ 1.355485] usbhid: USB HID core driver [ 1.360452] ata1: SATA link down (SStatus 0 SControl F300) [ 1.368473] TCP: cubic registered [ 1.371815] NET: Registered protocol family 17 [ 1.376274] can: controller area network core (rev 20120528 abi 9) [ 1.382510] NET: Registered protocol family 29 [ 1.386957] can: raw protocol (rev 20120528) [ 1.391221] can: broadcast manager protocol (rev 20120528 t) [ 1.396878] can: netlink gateway (rev 20130117) max_hops=1 [ 1.402764] Key type dns_resolver registered [ 1.407236] ThumbEE CPU extension supported. [ 1.411523] Registering SWP/SWPB emulation handler [ 1.416312] PJ4 iWMMXt v2 coprocessor enabled. [ 1.421939] USB Power: 5000 mV [ 1.425509] rtc-mv f10d8500.real-time-clock: setting system clock to 2014-06-10 18:59:22 UTC (1402426762) [ 1.436043] ALSA device list: [ 1.438997] No soundcards found. [ 1.442920] Waiting for root device /dev/mmcblk0p2... ~$off # PYBOOT: Exception: timeout
========================================================================
Board omap5uevm-multi_lpae_defconfig failure log: -------------------------------------------------
[ 47.092551] mmcblk0boot1: mmc0:0001 SEM04G partition 2 2.00 MiB [ 47.102198] mmcblk0: unknown partition table [ 47.102977] mmcblk0boot1: unknown partition table [ 47.103737] mmcblk0boot0: unknown partition table [ 47.117922] can: controller area network core (rev 20120528 abi 9) [ 47.124425] NET: Registered protocol family 29 [ 47.129074] can: raw protocol (rev 20120528) [ 47.133543] can: broadcast manager protocol (rev 20120528 t) [ 47.139467] can: netlink gateway (rev 20130117) max_hops=1 [ 47.145484] Key type dns_resolver registered [ 47.150015] omap_vc_init_channel: No PMIC info for vdd_core [ 47.155844] omap_vp_init: No PMIC info for vdd_core [ 47.160947] omap_vc_init_channel: No PMIC info for vdd_mm [ 47.166589] omap_vp_init: No PMIC info for vdd_mm [ 47.171502] omap_vc_init_channel: No PMIC info for vdd_mpu [ 47.177225] omap_vp_init: No PMIC info for vdd_mpu [ 47.182511] ThumbEE CPU extension supported. [ 47.186988] Registering SWP/SWPB emulation handler [ 47.193199] palmas 0-0048: Irq flag is 0x00000000 [ 47.200925] palmas 0-0048: Muxing GPIO 2, PWM 0, LED 0 [ 47.208480] smps123: 600 <--> 1500 mV at 1060 mV [ 47.214613] smps45: 600 <--> 1310 mV at 1030 mV [ 47.221063] smps6: 1200 mV [ 47.225061] smps7: 1800 mV [ 47.229200] smps8: 600 <--> 1310 mV at 1040 mV [ 47.234940] smps9: failed to get the current voltage [ 47.240191] palmas-pmic 48070000.i2c:palmas@48:palmas_pmic: failed to register 48070000.i2c:palmas@48:palmas_pmic regulator [ 47.252238] palmas-pmic: probe of 48070000.i2c:palmas@48:palmas_pmic failed with error -22 [ 48.276640] omap_i2c 48070000.i2c: controller timed out [ 48.381837] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 48.526847] omap_i2c 4807c000.i2c: bus 4 rev0.12 at 400 kHz [ 48.532929] platform 4a140000.sata: Driver ahci requests probe deferral [ 48.540367] omap_hsmmc 4809c000.mmc: unable to get vmmc regulator -517 [ 48.547230] platform 4809c000.mmc: Driver omap_hsmmc requests probe deferral [ 48.554932] /home/build/work/batch/drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 48.568255] ALSA device list: [ 48.571349] No soundcards found. [ 48.575345] Waiting for root device /dev/mmcblk1p2... ~$off # PYBOOT: Exception: timeout
========================================================================
Board omap5uevm-multi_v7_defconfig failure log: -------------------------------------------------
[ 47.516525] can: raw protocol (rev 20120528) [ 47.516532] can: broadcast manager protocol (rev 20120528 t) [ 47.516544] can: netlink gateway (rev 20130117) max_hops=1 [ 47.516853] Key type dns_resolver registered [ 47.516937] omap_vc_init_channel: No PMIC info for vdd_core [ 47.516939] omap_vp_init: No PMIC info for vdd_core [ 47.516943] omap_vc_init_channel: No PMIC info for vdd_mm [ 47.516945] omap_vp_init: No PMIC info for vdd_mm [ 47.516948] omap_vc_init_channel: No PMIC info for vdd_mpu [ 47.516950] omap_vp_init: No PMIC info for vdd_mpu [ 47.517258] ThumbEE CPU extension supported. [ 47.517273] Registering SWP/SWPB emulation handler [ 47.522575] palmas 0-0048: Irq flag is 0x00000000 [ 47.600217] palmas 0-0048: Muxing GPIO 2, PWM 0, LED 0 [ 47.606973] mmc0: new high speed MMC card at address 0001 [ 47.612859] mmcblk0: mmc0:0001 SEM04G 3.68 GiB [ 47.617672] mmcblk0boot0: mmc0:0001 SEM04G partition 1 2.00 MiB [ 47.623934] mmcblk0boot1: mmc0:0001 SEM04G partition 2 2.00 MiB [ 47.630801] mmcblk0: unknown partition table [ 47.630808] smps123: 600 <--> 1500 mV at 1060 mV [ 47.641192] mmcblk0boot1: unknown partition table [ 47.646431] smps45: 600 <--> 1310 mV at 1030 mV [ 47.646950] mmcblk0boot0: unknown partition table [ 47.657854] smps6: 1200 mV [ 47.661822] smps7: 1800 mV [ 47.665926] smps8: 600 <--> 1310 mV at 1040 mV [ 47.671643] smps9: failed to get the current voltage [ 47.676885] palmas-pmic 48070000.i2c:palmas@48:palmas_pmic: failed to register 48070000.i2c:palmas@48:palmas_pmic regulator [ 47.688929] palmas-pmic: probe of 48070000.i2c:palmas@48:palmas_pmic failed with error -22 [ 47.816851] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 47.961861] omap_i2c 4807c000.i2c: bus 4 rev0.12 at 400 kHz [ 47.967958] platform 4a140000.sata: Driver ahci requests probe deferral [ 47.975405] omap_hsmmc 4809c000.mmc: unable to get vmmc regulator -517 [ 47.982250] platform 4809c000.mmc: Driver omap_hsmmc requests probe deferral [ 47.989956] /home/build/work/batch/drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 48.003438] ALSA device list: [ 48.006530] No soundcards found. [ 48.010526] Waiting for root device /dev/mmcblk1p2... ~$off # PYBOOT: Exception: timeout
========================================================================
Board omap5uevm-omap2plus_defconfig failure log: -------------------------------------------------
[ 2.013303] NET: Registered protocol family 17 [ 2.013352] NET: Registered protocol family 15 [ 2.013519] Key type dns_resolver registered [ 2.013616] omap_vc_init_channel: No PMIC info for vdd_core [ 2.013620] omap_vp_init: No PMIC info for vdd_core [ 2.013630] omap_vc_init_channel: No PMIC info for vdd_mm [ 2.013633] omap_vp_init: No PMIC info for vdd_mm [ 2.013645] omap_vc_init_channel: No PMIC info for vdd_mpu [ 2.013648] omap_vp_init: No PMIC info for vdd_mpu [ 2.014202] ThumbEE CPU extension supported. [ 2.014224] Registering SWP/SWPB emulation handler [ 2.014233] SmartReflex Class3 initialized [ 2.027201] palmas 0-0048: Irq flag is 0x00000000 [ 2.116350] mmcblk0boot0: mmc0:0001 SEM04G partition 1 2.00 MiB [ 2.122906] mmcblk0boot1: mmc0:0001 SEM04G partition 2 2.00 MiB [ 2.131721] mmcblk0: unknown partition table [ 2.138588] mmcblk0boot1: unknown partition table [ 2.145416] mmcblk0boot0: unknown partition table [ 2.150499] palmas 0-0048: Muxing GPIO 2, PWM 0, LED 0 [ 2.203454] smps123: 600 <--> 1500 mV at 1060 mV [ 2.210508] smps45: 600 <--> 1310 mV at 1030 mV [ 2.217906] smps6: 1200 mV [ 2.222644] smps7: 1800 mV [ 2.227564] smps8: 600 <--> 1310 mV at 1040 mV [ 2.234023] smps9: failed to get the current voltage [ 2.239973] palmas-pmic 48070000.i2c:palmas@48:palmas_pmic: failed to register 48070000.i2c:palmas@48:palmas_pmic regulator [ 2.254325] palmas-pmic: probe of 48070000.i2c:palmas@48:palmas_pmic failed with error -22 [ 2.263164] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 2.270959] omap_i2c 4807c000.i2c: bus 4 rev0.12 at 400 kHz [ 2.277109] of_get_named_gpiod_flags: can't parse gpios property of node '/ocp/mmc@4809c000[0]' [ 2.286245] of_get_named_gpiod_flags: can't parse gpios property of node '/ocp/mmc@4809c000[0]' [ 2.295624] omap_hsmmc 4809c000.mmc: unable to get vmmc regulator -517 [ 2.302589] platform 4809c000.mmc: Driver omap_hsmmc requests probe deferral [ 2.311109] /home/build/work/batch/drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 2.319755] sr_init: No PMIC hook to init smartreflex [ 2.325306] sr_init: platform driver register failed for SR [ 2.353288] pbias_mmc_omap5: disabling [ 2.358834] Waiting for root device /dev/mmcblk1p2... ~$off # PYBOOT: Exception: timeout
========================================================================
Board snow-multi_lpae_defconfig failure log: -------------------------------------------------
[ 0.000002] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 2863311519744ns [ 0.000006] Switching to timer-based delay loop [ 2889.707818] sched_clock: 64 bits at 24MHz, resolution 41ns, wraps every 2863311519744ns [ 2889.708355] Console: colour dummy device 80x30 [ 2889.708366] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=120000) [ 2889.708373] pid_max: default: 32768 minimum: 301 [ 2889.708437] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 2889.708442] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 2889.708714] CPU: Testing write buffer coherency: ok [ 2889.708825] CPU0: update cpu_power 1024 [ 2889.708831] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [ 2889.708923] Setting up static identity map for 0x4081dfb0 - 0x4081e048 [ 2889.710018] CPU1: Booted secondary processor [ 2889.710054] CPU1: update cpu_power 1024 [ 2889.710057] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 [ 2889.710103] Brought up 2 CPUs [ 2889.710112] SMP: Total of 2 processors activated. [ 2889.710116] CPU: All CPU(s) started in HYP mode. [ 2889.710120] CPU: Virtualization extensions available. [ 2889.710361] devtmpfs: initialized [ 2889.712226] VFP support v0.3: implementor 41 architecture 4 part 30 variant f rev 0 [ 2889.712412] pinctrl core: initialized pinctrl subsystem [ 2889.712612] regulator-dummy: no parameters [ 2889.718536] NET: Registered protocol family 16 [ 2889.719409] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 2889.720111] cpuidle: using governor ladder [ 2889.720121] cpuidle: using governor menu [ 2889.725155] exynos-audss-clk 3810000.audss-clock-controller: setup completed [ 2889.729007] No ATAGs? [ 2889.729025] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers. [ 2889.729030] hw-breakpoint: maximum watchpoint size is 8 bytes. [ 2889.729123] EXYNOS5250 PMU Initialize [ 2889.730333] Serial: AMBA PL011 UART driver [ 2920.594297] edma-dma-engine edma-dma-engine.0: Can't allocate PaRAM dummy slot [ 2920.594310] edma-dma-engine: probe of edma-dma-engine.0 failed with error -5 [ 2920.594602] vbat-supply: no parameters [ 2920.594747] P5.0V_USB3CON: 5000 mV [ 2920.595874] vgaarb: loaded [ 2920.596171] SCSI s~$off # PYBOOT: Exception: timeout
========================================================================
Board snowball-u8500_defconfig failure log: -------------------------------------------------
[ 3.536743] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.21.auto [ 3.548675] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.21.auto) status -22 [ 3.555999] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.567474] musb-ux500 musb-hdrc.21.auto: Error applying setting, reverse things back [ 3.575988] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.22.auto [ 3.587890] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.22.auto) status -22 [ 3.595214] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.606689] musb-hdrc musb-hdrc.22.auto: Error applying setting, reverse things back [ 3.614532] HS USB OTG: no transceiver configured [ 3.619232] musb-hdrc musb-hdrc.22.auto: musb_init_controller failed with status -517 [ 3.627075] platform musb-hdrc.22.auto: Driver musb-hdrc requests probe deferral [ 3.635009] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.22.auto [ 3.646911] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.22.auto) status -22 [ 3.654235] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.665710] musb-ux500 musb-hdrc.22.auto: Error applying setting, reverse things back [ 3.674255] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.23.auto [ 3.686187] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.23.auto) status -22 [ 3.693511] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.704986] musb-hdrc musb-hdrc.23.auto: Error applying setting, reverse things back [ 3.712799] HS USB OTG: no transceiver configured [ 3.717498] musb-hdrc musb-hdrc.23.auto: musb_init_controller failed with status -517 [ 3.725341] platform musb-hdrc.23.auto: Driver musb-hdrc requests probe deferral [ 3.733276] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.23.auto [ 3.745208] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.23.auto) status -22 [ 3.752502] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.764007] musb-ux500 musb-hdrc.23.auto: Error applying setting, reverse things back [ 3.772521] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.24.auto [ 3.784423] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.24.auto) status -22 [ 3.791748] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.803222] musb-hdrc musb-hdrc.24.auto: Error applying setting, reverse things back [ 3.811035] HS USB OTG: no transceiver configured [ 3.815734] musb-hdrc musb-hdrc.24.auto: musb_init_controller failed with status -517 [ 3.823608] platform musb-hdrc.24.auto: Driver musb-hdrc requests probe deferral [ 3.831512] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.24.auto [ 3.843444] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.24.auto) status -22 [ 3.850738] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.862213] musb-ux500 musb-hdrc.24.auto: Error applying setting, reverse things back [ 3.870727] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.25.auto ~$off # PYBOOT: Exception: timeout