Failed boards:
dalmore tegra_defconfig : FAILED 1:28.54 dalmore multi_v7_defconfig : FAILED 1:04.94 dalmore multi_lpae_defconfig : FAILED 1:05.04 panda multi_v7_defconfig : FAILED 1:36.06
Successful boards:
apc vt8500_v6_v7_defconfig : passed 1:16.71 arndale exynos_defconfig : passed 1:13.53 bbb omap2plus_defconfig : passed 1:33.34 bbb multi_v7_defconfig : passed 1:27.19 beaver tegra_defconfig : passed 0:50.57 beaver multi_v7_defconfig : passed 0:50.61 capri bcm_defconfig : passed 0:43.20 capri multi_v7_defconfig : passed 0:44.08 cubie sunxi_defconfig : passed 1:03.00 cubie multi_v7_defconfig : passed 1:05.49 cubie2 sunxi_defconfig : passed 1:01.85 cubie2 multi_v7_defconfig : passed 1:03.52 cubie2 multi_lpae_defconfig : passed 1:01.30 cubox dove_defconfig : passed 1:02.95 hummingboard imx_v6_v7_defconfig : passed 1:19.41 hummingboard multi_v7_defconfig : passed 1:06.59 omap5uevm multi_v7_defconfig : warnings 1:40.20 omap5uevm multi_lpae_defconfig : warnings 1:36.12 panda omap2plus_defconfig : passed 1:16.24 sama5 sama5_defconfig : passed 1:54.11 seaboard tegra_defconfig : passed 1:02.22 seaboard multi_v7_defconfig : passed 1:10.11 snow exynos_defconfig : passed 1:25.43 snowball u8500_defconfig : passed 1:31.68 snowball multi_v7_defconfig : passed 2:10.20 trimslice tegra_defconfig : passed 1:06.64 trimslice multi_v7_defconfig : passed 1:11.62 wandboard imx_v6_v7_defconfig : passed 0:53.08 wandboard multi_v7_defconfig : passed 1:05.70
Offline boards:
omap5uevm omap2plus_defconfig : OFFLINE 2:31.53
Board legend is available at http://arm-soc.lixom.net/boards.html
Last entries of failed logs below:
========================================================================
Board dalmore-multi_lpae_defconfig failure log: -------------------------------------------------
Tegra114 (Dalmore) # tftp 0x82000000 mainline/v3.14-7333-g59ecc26/multi_lpae_defconfig/zImage tftp 0x82000000 mainline/v3.14-7333-g59ecc26/multi_lpae_defconfig/zImage Using asx0 device TFTP from server 172.16.1.3; our IP address is 172.16.1.134 Filename 'mainline/v3.14-7333-g59ecc26/multi_lpae_defconfig/zImage'. Load address: 0x82000000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################################# 2.8 MiB/s done Bytes transferred = 4521936 (44ffd0 hex) Tegra114 (Dalmore) # setenv serverip 172.16.1.3 setenv serverip 172.16.1.3 Tegra114 (Dalmore) # tftp 0x83000000 mainline/v3.14-7333-g59ecc26/multi_lpae_defconfig/dtbs/tegra114-dalmore.dtb tftp 0x83000000 mainline/v3.14-7333-g59ecc26/multi_lpae_defconfig/dtbs/tegra114-dalmore.dtb Using asx0 device TFTP from server 172.16.1.3; our IP address is 172.16.1.134 Filename 'mainline/v3.14-7333-g59ecc26/multi_lpae_defconfig/dtbs/tegra114-dalmore.dtb'. Load address: 0x83000000 Loading: *### 1.2 MiB/s done Bytes transferred = 34059 (850b hex) Tegra114 (Dalmore) # printenv bootargs printenv bootargs bootargs=console=ttyS0,115200 root=/dev/mmcblk0p1 rootwait debug earlyprintk Tegra114 (Dalmore) # bootz 0x82000000 - 0x83000000 bootz 0x82000000 - 0x83000000 Kernel image @ 0x82000000 [ 0x000000 - 0x44ffd0 ] ## Flattened Device Tree blob at 83000000 Booting using the fdt blob at 0x83000000 Loading Device Tree to 8fff4000, end 8ffff50a ... OK
Starting kernel ...
~$off # PYBOOT: Exception: timeout
========================================================================
Board dalmore-multi_v7_defconfig failure log: -------------------------------------------------
Tegra114 (Dalmore) # tftp 0x82000000 mainline/v3.14-7333-g59ecc26/multi_v7_defconfig/zImage tftp 0x82000000 mainline/v3.14-7333-g59ecc26/multi_v7_defconfig/zImage Using asx0 device TFTP from server 172.16.1.3; our IP address is 172.16.1.134 Filename 'mainline/v3.14-7333-g59ecc26/multi_v7_defconfig/zImage'. Load address: 0x82000000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ############################################### 2.8 MiB/s done Bytes transferred = 4497680 (44a110 hex) Tegra114 (Dalmore) # setenv serverip 172.16.1.3 setenv serverip 172.16.1.3 Tegra114 (Dalmore) # tftp 0x83000000 mainline/v3.14-7333-g59ecc26/multi_v7_defconfig/dtbs/tegra114-dalmore.dtb tftp 0x83000000 mainline/v3.14-7333-g59ecc26/multi_v7_defconfig/dtbs/tegra114-dalmore.dtb Using asx0 device TFTP from server 172.16.1.3; our IP address is 172.16.1.134 Filename 'mainline/v3.14-7333-g59ecc26/multi_v7_defconfig/dtbs/tegra114-dalmore.dtb'. Load address: 0x83000000 Loading: *### 738.3 KiB/s done Bytes transferred = 34059 (850b hex) Tegra114 (Dalmore) # printenv bootargs printenv bootargs bootargs=console=ttyS0,115200 root=/dev/mmcblk0p1 rootwait debug earlyprintk Tegra114 (Dalmore) # bootz 0x82000000 - 0x83000000 bootz 0x82000000 - 0x83000000 Kernel image @ 0x82000000 [ 0x000000 - 0x44a110 ] ## Flattened Device Tree blob at 83000000 Booting using the fdt blob at 0x83000000 Loading Device Tree to 8fff4000, end 8ffff50a ... OK
Starting kernel ...
~$off # PYBOOT: Exception: timeout
========================================================================
Board dalmore-tegra_defconfig failure log: -------------------------------------------------
[ 1.073278] avdd-usb: 3300 mV [ 1.075245] avdd-usb: supplied by vdd-sys-5v0 [ 1.081478] rail-3v3: no parameters [ 1.085429] rail-5v0: no parameters [ 1.088999] REGEN3: no parameters [ 1.091921] SYSEN1: no parameters [ 1.095405] SYSEN2: no parameters [ 1.100686] Linux video capture interface: v2.00 [ 1.107208] platform 70019010.iommu: Driver tegra-smmu requests probe deferral [ 1.114176] Advanced Linux Sound Architecture Driver Initialized. [ 1.124032] Bluetooth: Core ver 2.19 [ 1.126137] NET: Registered protocol family 31 [ 1.130313] Bluetooth: HCI device and connection manager initialized [ 1.136835] Bluetooth: HCI socket layer initialized [ 1.141720] Bluetooth: L2CAP socket layer initialized [ 1.147040] Bluetooth: SCO socket layer initialized [ 1.154317] cfg80211: Calling CRDA to update world regulatory domain [ 1.161069] Switched to clocksource arch_sys_counter [ 1.249656] NET: Registered protocol family 2 [ 1.256107] TCP established hash table entries: 8192 (order: 3, 32768 bytes) [ 1.261786] TCP bind hash table entries: 8192 (order: 4, 65536 bytes) [ 1.268487] TCP: Hash tables configured (established 8192 bind 8192) [ 1.275954] TCP: reno registered [ 1.277581] UDP hash table entries: 512 (order: 2, 16384 bytes) [ 1.283736] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) [ 1.291322] NET: Registered protocol family 1 [ 1.296972] RPC: Registered named UNIX socket transport module. [ 1.301158] RPC: Registered udp transport module. [ 1.305857] RPC: Registered tcp transport module. [ 1.310624] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 1.317195] PCI: CLS 0 bytes, default 64 [ 1.337378] futex hash table entries: 1024 (order: 4, 65536 bytes) [ 1.346514] bounce pool size: 64 pages [ 1.354166] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 1.361320] msgmni has been set to 1468 [ 1.369707] io scheduler noop registered (default) [ 1.402229] tegra114-pinctrl 70000868.pinmux: Config param 000e not supported on group drive_gma [ 1.409229] tegra114-pinctrl 70000868.pinmux: pin_config_group_set op failed for group 199 [ 1.417604] tegra114-pinctrl 70000868.pinmux: Error applying setting, re~$off # PYBOOT: Exception: timeout
========================================================================
Board panda-multi_v7_defconfig failure log: -------------------------------------------------
[ 1.618774] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.625549] usbcore: registered new interface driver usbhid [ 1.631439] usbhid: USB HID core driver [ 1.638793] TCP: cubic registered [ 1.642333] NET: Registered protocol family 17 [ 1.647186] Key type dns_resolver registered [ 1.652130] Power Management for TI OMAP4+ devices. [ 1.657318] Power Management for TI OMAP4. [ 1.661621] OMAP4 PM: u-boot >= v2012.07 is required for full PM support [ 1.669006] Registering SWP/SWPB emulation handler [ 1.674743] vwl1271: 1800 mV [ 1.679290] Skipping twl internal clock init and using bootloader value (unknown osc rate) [ 1.689208] twl 0-0048: PIH (irq 39) nested IRQs [ 1.694854] twl_rtc rtc.11: Power up reset detected. [ 1.700714] twl_rtc rtc.11: Enabling TWL-RTC [ 1.707519] twl_rtc rtc.11: rtc core: registered rtc.11 as rtc0 [ 1.714508] VAUX1_6030: 1000 <--> 3000 mV at 2800 mV [ 1.720642] VAUX2_6030: 1200 <--> 2800 mV at 1800 mV [ 1.726745] VAUX3_6030: 1000 <--> 3000 mV at 1200 mV [ 1.732849] VMMC: 1200 <--> 3000 mV at 3000 mV [ 1.738372] VPP: 1800 <--> 2500 mV at 1900 mV [ 1.743804] VUSIM: 1200 <--> 2900 mV at 1800 mV [ 1.749023] VDAC: 1800 mV [ 1.749023] VANA: 2100 mV [ 1.756072] VCXIO: 1800 mV [ 1.756072] VUSB: 3300 mV [ 1.762969] V1V8: 1800 mV [ 1.766540] V2V1: 2100 mV [ 1.772369] omap_i2c 48070000.i2c: bus 0 rev0.11 at 400 kHz [ 1.897583] usb 1-1: new high-speed USB device number 2 using ehci-omap [ 2.052001] omap_i2c 48072000.i2c: bus 1 rev0.11 at 400 kHz [ 2.052886] hub 1-1:1.0: USB hub found [ 2.052978] hub 1-1:1.0: 5 ports detected [ 2.095062] gic_timer_retrigger: lost localtimer interrupt [ 2.357116] usb 1-1.1: new high-speed USB device number 3 using ehci-omap [ 2.407531] omap_i2c 48060000.i2c: bus 2 rev0.11 at 100 kHz [ 2.497100] smsc95xx v1.0.4 [ 2.589477] smsc95xx 1-1.1:1.0 eth0: register 'smsc95xx' at usb-4a064c00.ehci-1.1, smsc95xx USB 2.0 Ethernet, 76:59:1e:48:80:90 ~$off # PYBOOT: Exception: timeout