Full logs are available at http://arm-soc.lixom.net/bootlogs/next/next-20161129/
Failed boards:
arndale arm-multi_v7_nosmp_defconfig : BUILD FAILED bbb arm-multi_v7_defconfig : FAILED 3:09.52 bbb arm-multi_v7_nosmp_defconfig : BUILD FAILED beagleboard-x15 arm-multi_v7_nosmp_defconfig : BUILD FAILED beaver arm-multi_v7_nosmp_defconfig : BUILD FAILED capri arm-multi_v7_nosmp_defconfig : BUILD FAILED colibri-vf61 arm-multi_v7_nosmp_defconfig : BUILD FAILED colombus arm-multi_v7_nosmp_defconfig : BUILD FAILED cosmic arm-multi_v7_nosmp_defconfig : BUILD FAILED cubie arm-sunxi_defconfig : FAILED 1:42.84 cubie arm-multi_v7_defconfig : FAILED 1:49.98 cubie arm-multi_v7_nosmp_defconfig : BUILD FAILED cubie2 arm-sunxi_defconfig : FAILED 1:40.62 cubie2 arm-multi_v7_defconfig : FAILED 1:48.50 cubie2 arm-multi_lpae_defconfig : FAILED 2:06.61 cubie2 arm-multi_v7_nosmp_defconfig : BUILD FAILED cubox arm-multi_v7_nosmp_defconfig : BUILD FAILED dalmore arm-multi_v7_nosmp_defconfig : BUILD FAILED hummingboard arm-multi_v7_nosmp_defconfig : BUILD FAILED jetsontk1 arm-multi_v7_nosmp_defconfig : BUILD FAILED omap5uevm arm-multi_v7_defconfig : FAILED 2:12.09 omap5uevm arm-multi_lpae_defconfig : FAILED 2:24.40 omap5uevm arm-multi_v7_nosmp_defconfig : BUILD FAILED pandaes arm-multi_v7_nosmp_defconfig : BUILD FAILED parallella arm-multi_v7_nosmp_defconfig : BUILD FAILED pi arm-multi_v7_nosmp_defconfig : BUILD FAILED pit arm-exynos_defconfig : FAILED 1:51.75 pit arm-multi_v7_nosmp_defconfig : BUILD FAILED rk3288evb arm-multi_v7_nosmp_defconfig : BUILD FAILED seaboard arm-multi_v7_nosmp_defconfig : BUILD FAILED snow arm-multi_v7_nosmp_defconfig : BUILD FAILED snowball arm-multi_v7_defconfig : FAILED 3:31.42 snowball arm-multi_v7_nosmp_defconfig : BUILD FAILED socfpga arm-multi_v7_nosmp_defconfig : BUILD FAILED trimslice arm-multi_v7_nosmp_defconfig : BUILD FAILED wandboard arm-multi_v7_nosmp_defconfig : BUILD FAILED
Successful boards:
apc arm-vt8500_v6_v7_defconfig : passed 1:22.46 arndale arm-exynos_defconfig : warnings 2:01.12 arndale arm-multi_v7_defconfig : warnings 1:55.08 arndale arm-multi_lpae_defconfig : warnings 1:39.67 bbb arm-omap2plus_defconfig : passed 1:32.04 beagleboard-x15 arm-omap2plus_defconfig : passed 1:20.58 beagleboard-x15 arm-multi_v7_defconfig : warnings 0:48.24 beagleboard-x15 arm-multi_lpae_defconfig : warnings 0:57.77 capri arm-multi_v7_defconfig : passed 1:02.86 chitra powerpc-pasemi_defconfig : passed 1:33.87 chitra powerpc-ppc64_defconfig : passed 2:30.67 colombus arm-sunxi_defconfig : passed 2:10.89 colombus arm-multi_lpae_defconfig : passed 2:14.62 cosmic arm-imx_v6_v7_defconfig : passed 3:20.66 cosmic arm-multi_v7_defconfig : passed 2:58.10 cubox arm-multi_v7_defconfig : passed 1:05.81 cubox arm-mvebu_v7_defconfig : passed 1:18.46 jetsontk1 arm-tegra_defconfig : passed 0:49.17 jetsontk1 arm-multi_v7_defconfig : passed 0:46.65 jetsontk1 arm-multi_lpae_defconfig : passed 1:09.76 jetsontx1 arm64-defconfig : passed 2:15.06 jetsontx1 arm64-nosmp_defconfig : passed 1:51.95 minnowmax x86-minnowmax_defconfig : passed 1:29.15 odroidu3 arm-exynos_defconfig : passed 2:11.44 odroidu3 arm-multi_v7_defconfig : passed 1:53.41 omap5uevm arm-omap2plus_defconfig : passed 2:47.16 pandaes arm-omap2plus_defconfig : warnings 1:35.19 pandaes arm-multi_v7_defconfig : passed 1:38.44 parallella arm-multi_v7_defconfig : passed 3:34.55 pi arm-exynos_defconfig : warnings 2:10.89 pi arm-multi_v7_defconfig : warnings 2:13.85 pi arm-multi_lpae_defconfig : warnings 2:33.39 pit arm-multi_v7_defconfig : warnings 2:19.97 pit arm-multi_lpae_defconfig : warnings 2:15.55 seaboard arm-tegra_defconfig : passed 1:03.28 seaboard arm-multi_v7_defconfig : passed 1:02.91 seattle arm64-defconfig : warnings 2:25.36 seattle arm64-nosmp_defconfig : warnings 2:25.80 wandboard arm-imx_v6_v7_defconfig : passed 1:11.10 wandboard arm-multi_v7_defconfig : passed 1:23.11
Offline boards:
beaver arm-tegra_defconfig : OFFLINE 2:13.10 beaver arm-multi_v7_defconfig : OFFLINE 2:48.89 colibri-vf61 arm-imx_v6_v7_defconfig : OFFLINE 1:16.67 colibri-vf61 arm-multi_v7_defconfig : OFFLINE 1:18.52 colombus arm-multi_v7_defconfig : OFFLINE 0:54.32 dalmore arm-tegra_defconfig : OFFLINE 2:19.21 dalmore arm-multi_v7_defconfig : OFFLINE 3:04.54 dalmore arm-multi_lpae_defconfig : OFFLINE 2:19.88 hummingboard arm-imx_v6_v7_defconfig : OFFLINE 2:54.47 hummingboard arm-multi_v7_defconfig : OFFLINE 2:13.03 rk3288evb arm-multi_v7_defconfig : OFFLINE 1:09.19 rk3288evb arm-multi_lpae_defconfig : OFFLINE 0:59.51 sama5 arm-sama5_defconfig : OFFLINE 2:27.27 sama5d3-xplained arm-sama5_defconfig : OFFLINE 2:25.27 snow arm-exynos_defconfig : OFFLINE 2:39.79 snow arm-multi_v7_defconfig : OFFLINE 2:15.07 snow arm-multi_lpae_defconfig : OFFLINE 2:14.66 snowball arm-u8500_defconfig : OFFLINE 1:56.08 socfpga arm-socfpga_defconfig : OFFLINE 2:31.34 socfpga arm-multi_v7_defconfig : OFFLINE 3:02.84 trimslice arm-tegra_defconfig : OFFLINE 2:27.11 trimslice arm-multi_v7_defconfig : OFFLINE 2:44.03
Board legend is available at http://arm-soc.lixom.net/boards.html
Board bbb-arm-multi_v7_defconfig failure log: -------------------------------------------------
rootfs: clean, 31339/113120 files, 343186/452352 blocks [?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [ 11.285714] EXT4-fs (mmcblk1p2): re-mounted. Opts: errors=remount-ro [....] Cleaning up temporary files... /tmp[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0c. [[36minfo[39;49m] Loading kernel module fbcon. libkmod: ERROR ../libkmod/libkmod.c:554 kmod_search_moddep: could not open moddep file '/lib/modules/4.9.0-rc7-next-20161129/modules.dep.bin' [[36minfo[39;49m] Loading kernel module ti_tscadc. libkmod: ERROR ../libkmod/libkmod.c:554 kmod_search_moddep: could not open moddep file '/lib/modules/4.9.0-rc7-next-20161129/modules.dep.bin' [....] Activating lvm and md swap...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [....] Checking file systems...fsck from util-linux 2.20.1 [?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [....] Mounting local filesystems...mount: special device /dev/mmcblk0p1 does not exist [?25l[?1c7[1G[[31mFAIL[39;49m8[?25h[?0c[31mfailed.[39;49m [....] Activating swapfile swap...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [....] Cleaning up temporary files...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0c. [....] Setting kernel variables ...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [....] Configuring network interfaces...[ 20.004084] net eth0: initializing cpsw version 1.12 (0) [ 20.107709] SMSC LAN8710/LAN8720 4a101000.mdio:00: attached PHY driver [SMSC LAN8710/LAN8720] (mii_bus:phy_addr=4a101000.mdio:00, irq=-1) [ 20.127513] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [....] Cleaning up temporary files...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0c. INIT: Entering runlevel: 2 [[36minfo[39;49m] Using makefile-style concurrent boot in runlevel 2. [ 22.168019] cpsw 4a100000.ethernet eth0: Link is Up - 100Mbps/Full - flow control off [ 22.176326] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [....] Starting enhanced syslogd: rsyslogd[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0c. [....] Starting web server: apache2apache2: Could not reliably determine the server's fully qualified domain name, using 127.0.0.1 for ServerName [?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0c. [....] Starting periodic command scheduler: cron[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0c. [....] Starting system message bus: dbus[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0c. [....] Loading cpufreq kernel modules...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone (none). [....] CPUFreq Utilities: Setting ondemand CPUFreq governor...CPU0...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [....] Starting OpenBSD Secure Shell server: sshd[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0c.
[PYBOOT] [bbb 03:06]: Timed out waiting for "<type 'str'>":
[PYBOOT] [bbb 03:07]: got exception: timeout ~$off
[PYBOOT] [bbb 03:08]: Done. Board cubie-arm-multi_v7_defconfig failure log: -------------------------------------------------
[ 1.524373] ehci-platform 1c14000.usb: new USB bus registered, assigned bus number 1 [ 1.532355] ehci-platform 1c14000.usb: irq 22, io mem 0x01c14000 [ 1.563733] ehci-platform 1c14000.usb: USB 2.0 started, EHCI 1.00 [ 1.570732] hub 1-0:1.0: USB hub found [ 1.574586] hub 1-0:1.0: 1 port detected [ 1.580534] ehci-platform 1c1c000.usb: EHCI Host Controller [ 1.586222] ehci-platform 1c1c000.usb: new USB bus registered, assigned bus number 2 [ 1.594234] ehci-platform 1c1c000.usb: irq 26, io mem 0x01c1c000 [ 1.623723] ehci-platform 1c1c000.usb: USB 2.0 started, EHCI 1.00 [ 1.630698] hub 2-0:1.0: USB hub found [ 1.634549] hub 2-0:1.0: 1 port detected [ 1.640513] ohci-platform 1c14400.usb: Generic Platform OHCI controller [ 1.647248] ohci-platform 1c14400.usb: new USB bus registered, assigned bus number 3 [ 1.655244] ohci-platform 1c14400.usb: irq 23, io mem 0x01c14400 [ 1.728589] hub 3-0:1.0: USB hub found [ 1.732378] hub 3-0:1.0: 1 port detected [ 1.738389] ohci-platform 1c1c400.usb: Generic Platform OHCI controller [ 1.745199] ohci-platform 1c1c400.usb: new USB bus registered, assigned bus number 4 [ 1.753173] ohci-platform 1c1c400.usb: irq 27, io mem 0x01c1c400 [ 1.828564] hub 4-0:1.0: USB hub found [ 1.832360] hub 4-0:1.0: 1 port detected [ 1.838065] sunxi-rtc 1c20d00.rtc: setting system clock to 2010-01-01 00:00:15 UTC (1262304015) [ 1.847318] vcc3v0: disabling [ 1.850291] vcc5v0: disabling [ 1.858445] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 1.868258] ata1.00: ATA-8: SanDisk SSD P4 32GB, SSD CS01, max UDMA/133 [ 1.874904] ata1.00: 62533296 sectors, multi 1: LBA48 [ 1.880548] ata1.00: configured for UDMA/133 [ 1.885340] scsi 0:0:0:0: Direct-Access ATA SanDisk SSD P4 3 CS01 PQ: 0 ANSI: 5 [ 1.895769] sd 0:0:0:0: [sda] 62533296 512-byte logical blocks: (32.0 GB/29.8 GiB) [ 1.903432] sd 0:0:0:0: [sda] Write Protect is off [ 1.908415] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.926644] sda: sda1
[PYBOOT] [cubie 01:47]: Timed out waiting for "<type 'str'>":
[PYBOOT] [cubie 01:48]: got exception: timeout ~$off
[PYBOOT] [cubie 01:49]: Done. Board cubie-arm-sunxi_defconfig failure log: -------------------------------------------------
[ 1.416467] hub 2-0:1.0: USB hub found [ 1.420302] hub 2-0:1.0: 1 port detected [ 1.424924] ohci-platform 1c14400.usb: Generic Platform OHCI controller [ 1.431611] ohci-platform 1c14400.usb: new USB bus registered, assigned bus number 3 [ 1.439491] ohci-platform 1c14400.usb: irq 23, io mem 0x01c14400 [ 1.514336] hub 3-0:1.0: USB hub found [ 1.518124] hub 3-0:1.0: 1 port detected [ 1.522776] ohci-platform 1c1c400.usb: Generic Platform OHCI controller [ 1.529404] ohci-platform 1c1c400.usb: new USB bus registered, assigned bus number 4 [ 1.537353] ohci-platform 1c1c400.usb: irq 27, io mem 0x01c1c400 [ 1.614310] hub 4-0:1.0: USB hub found [ 1.618122] hub 4-0:1.0: 1 port detected [ 1.622865] usb_phy_generic.0.auto supply vcc not found, using dummy regulator [ 1.630600] musb-hdrc musb-hdrc.1.auto: MUSB HDRC host driver [ 1.636372] musb-hdrc musb-hdrc.1.auto: new USB bus registered, assigned bus number 5 [ 1.644295] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 1.651347] hub 5-0:1.0: USB hub found [ 1.655201] hub 5-0:1.0: 1 port detected [ 1.659162] ata1.00: ATA-8: SanDisk SSD P4 32GB, SSD CS01, max UDMA/133 [ 1.665803] ata1.00: 62533296 sectors, multi 1: LBA48 [ 1.671721] sunxi-rtc 1c20d00.rtc: setting system clock to 2010-01-01 00:00:14 UTC (1262304014) [ 1.680768] vcc3v0: disabling [ 1.683740] vcc5v0: disabling [ 1.686713] ldo3: disabling [ 1.689868] ldo4: disabling [ 1.692800] ata1.00: configured for UDMA/133 [ 1.697289] ALSA device list: [ 1.700315] #0: sun4i-codec [ 1.704135] scsi 0:0:0:0: Direct-Access ATA SanDisk SSD P4 3 CS01 PQ: 0 ANSI: 5 [ 1.713697] sd 0:0:0:0: [sda] 62533296 512-byte logical blocks: (32.0 GB/29.8 GiB) [ 1.721420] sd 0:0:0:0: [sda] Write Protect is off [ 1.726295] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.744595] sda: sda1
[PYBOOT] [cubie 01:40]: Timed out waiting for "<type 'str'>":
[PYBOOT] [cubie 01:41]: got exception: timeout ~$off
[PYBOOT] [cubie 01:42]: Done. Board cubie2-arm-multi_lpae_defconfig failure log: -------------------------------------------------
[ 1.552478] ehci-platform 1c14000.usb: new USB bus registered, assigned bus number 1 [ 1.560486] ehci-platform 1c14000.usb: irq 29, io mem 0x01c14000 [ 1.591452] ehci-platform 1c14000.usb: USB 2.0 started, EHCI 1.00 [ 1.598532] hub 1-0:1.0: USB hub found [ 1.602409] hub 1-0:1.0: 1 port detected [ 1.608491] ehci-platform 1c1c000.usb: EHCI Host Controller [ 1.614207] ehci-platform 1c1c000.usb: new USB bus registered, assigned bus number 2 [ 1.622275] ehci-platform 1c1c000.usb: irq 33, io mem 0x01c1c000 [ 1.651439] ehci-platform 1c1c000.usb: USB 2.0 started, EHCI 1.00 [ 1.658495] hub 2-0:1.0: USB hub found [ 1.662364] hub 2-0:1.0: 1 port detected [ 1.668452] ohci-platform 1c14400.usb: Generic Platform OHCI controller [ 1.675278] ohci-platform 1c14400.usb: new USB bus registered, assigned bus number 3 [ 1.683292] ohci-platform 1c14400.usb: irq 30, io mem 0x01c14400 [ 1.756369] hub 3-0:1.0: USB hub found [ 1.760178] hub 3-0:1.0: 1 port detected [ 1.766373] ohci-platform 1c1c400.usb: Generic Platform OHCI controller [ 1.773151] ohci-platform 1c1c400.usb: new USB bus registered, assigned bus number 4 [ 1.781194] ohci-platform 1c1c400.usb: irq 34, io mem 0x01c1c400 [ 1.856387] hub 4-0:1.0: USB hub found [ 1.860184] hub 4-0:1.0: 1 port detected [ 1.866149] sunxi-rtc 1c20d00.rtc: setting system clock to 1970-01-01 00:00:15 UTC (15) [ 1.874848] vcc3v0: disabling [ 1.877824] vcc5v0: disabling [ 1.886386] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1.898007] ata1.00: ATA-8: SanDisk pSSD-S2 8GB, SSD 6.00, max UDMA/133 [ 1.904656] ata1.00: 15649200 sectors, multi 0: LBA48 [ 1.916042] ata1.00: configured for UDMA/133 [ 1.920888] scsi 0:0:0:0: Direct-Access ATA SanDisk pSSD-S2 6.00 PQ: 0 ANSI: 5 [ 1.931687] sd 0:0:0:0: [sda] 15649200 512-byte logical blocks: (8.01 GB/7.46 GiB) [ 1.939367] sd 0:0:0:0: [sda] Write Protect is off [ 1.944342] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.972016] sda: sda1
[PYBOOT] [cubie2 02:03]: Timed out waiting for "<type 'str'>":
[PYBOOT] [cubie2 02:04]: got exception: timeout ~$off
[PYBOOT] [cubie2 02:05]: Done. Board cubie2-arm-multi_v7_defconfig failure log: -------------------------------------------------
[ 1.552524] ehci-platform 1c14000.usb: new USB bus registered, assigned bus number 1 [ 1.560536] ehci-platform 1c14000.usb: irq 29, io mem 0x01c14000 [ 1.591511] ehci-platform 1c14000.usb: USB 2.0 started, EHCI 1.00 [ 1.598587] hub 1-0:1.0: USB hub found [ 1.602466] hub 1-0:1.0: 1 port detected [ 1.608554] ehci-platform 1c1c000.usb: EHCI Host Controller [ 1.614272] ehci-platform 1c1c000.usb: new USB bus registered, assigned bus number 2 [ 1.622347] ehci-platform 1c1c000.usb: irq 33, io mem 0x01c1c000 [ 1.651499] ehci-platform 1c1c000.usb: USB 2.0 started, EHCI 1.00 [ 1.658543] hub 2-0:1.0: USB hub found [ 1.662412] hub 2-0:1.0: 1 port detected [ 1.668500] ohci-platform 1c14400.usb: Generic Platform OHCI controller [ 1.675321] ohci-platform 1c14400.usb: new USB bus registered, assigned bus number 3 [ 1.683338] ohci-platform 1c14400.usb: irq 30, io mem 0x01c14400 [ 1.756435] hub 3-0:1.0: USB hub found [ 1.760245] hub 3-0:1.0: 1 port detected [ 1.766437] ohci-platform 1c1c400.usb: Generic Platform OHCI controller [ 1.773212] ohci-platform 1c1c400.usb: new USB bus registered, assigned bus number 4 [ 1.781253] ohci-platform 1c1c400.usb: irq 34, io mem 0x01c1c400 [ 1.856449] hub 4-0:1.0: USB hub found [ 1.860245] hub 4-0:1.0: 1 port detected [ 1.866190] sunxi-rtc 1c20d00.rtc: setting system clock to 1970-01-01 00:00:15 UTC (15) [ 1.874904] vcc3v0: disabling [ 1.877878] vcc5v0: disabling [ 1.886427] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1.898039] ata1.00: ATA-8: SanDisk pSSD-S2 8GB, SSD 6.00, max UDMA/133 [ 1.904683] ata1.00: 15649200 sectors, multi 0: LBA48 [ 1.917695] ata1.00: configured for UDMA/133 [ 1.922565] scsi 0:0:0:0: Direct-Access ATA SanDisk pSSD-S2 6.00 PQ: 0 ANSI: 5 [ 1.933268] sd 0:0:0:0: [sda] 15649200 512-byte logical blocks: (8.01 GB/7.46 GiB) [ 1.940947] sd 0:0:0:0: [sda] Write Protect is off [ 1.945965] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.973638] sda: sda1
[PYBOOT] [cubie2 01:45]: Timed out waiting for "<type 'str'>":
[PYBOOT] [cubie2 01:46]: got exception: timeout ~$off
[PYBOOT] [cubie2 01:47]: Done. Board cubie2-arm-sunxi_defconfig failure log: -------------------------------------------------
[ 1.429845] hub 2-0:1.0: USB hub found [ 1.433704] hub 2-0:1.0: 1 port detected [ 1.438387] ohci-platform 1c14400.usb: Generic Platform OHCI controller [ 1.445138] ohci-platform 1c14400.usb: new USB bus registered, assigned bus number 3 [ 1.453064] ohci-platform 1c14400.usb: irq 30, io mem 0x01c14400 [ 1.527738] hub 3-0:1.0: USB hub found [ 1.531532] hub 3-0:1.0: 1 port detected [ 1.536292] ohci-platform 1c1c400.usb: Generic Platform OHCI controller [ 1.543010] ohci-platform 1c1c400.usb: new USB bus registered, assigned bus number 4 [ 1.550926] ohci-platform 1c1c400.usb: irq 34, io mem 0x01c1c400 [ 1.627732] hub 4-0:1.0: USB hub found [ 1.631550] hub 4-0:1.0: 1 port detected [ 1.636380] usb_phy_generic.0.auto supply vcc not found, using dummy regulator [ 1.644278] musb-hdrc musb-hdrc.1.auto: MUSB HDRC host driver [ 1.650066] musb-hdrc musb-hdrc.1.auto: new USB bus registered, assigned bus number 5 [ 1.658922] hub 5-0:1.0: USB hub found [ 1.662725] hub 5-0:1.0: 1 port detected [ 1.666741] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1.673716] sunxi-rtc 1c20d00.rtc: setting system clock to 1970-01-01 00:00:13 UTC (13) [ 1.682139] vcc3v0: disabling [ 1.685188] vcc5v0: disabling [ 1.688166] ldo3: disabling [ 1.691337] ldo4: disabling [ 1.694319] ata1.00: ATA-8: SanDisk pSSD-S2 8GB, SSD 6.00, max UDMA/133 [ 1.700932] ata1.00: 15649200 sectors, multi 0: LBA48 [ 1.706136] ALSA device list: [ 1.709102] #0: sun4i-codec [ 1.715458] ata1.00: configured for UDMA/133 [ 1.720280] scsi 0:0:0:0: Direct-Access ATA SanDisk pSSD-S2 6.00 PQ: 0 ANSI: 5 [ 1.730019] sd 0:0:0:0: [sda] 15649200 512-byte logical blocks: (8.01 GB/7.46 GiB) [ 1.737794] sd 0:0:0:0: [sda] Write Protect is off [ 1.742685] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.770494] sda: sda1
[PYBOOT] [cubie2 01:38]: Timed out waiting for "<type 'str'>":
[PYBOOT] [cubie2 01:39]: got exception: timeout ~$off
[PYBOOT] [cubie2 01:40]: Done. Board omap5uevm-arm-multi_lpae_defconfig failure log: -------------------------------------------------
[ 3.668244] Exception stack(0xee191b50 to 0xee191b98) [ 3.673533] 1b40: c047ac9c ee191bec ee191be8 1fdc5ad7 [ 3.682085] 1b60: 000020cb c0208000 c0ebe860 0000b04c ee191bec ee191be8 ee191d48 c0d1d080 [ 3.690649] 1b80: 000020c0 ee191ba0 c047a73c c03b3f04 20000093 ffffffff [ 3.697570] [<c030c538>] (__dabt_svc) from [<c03b3f04>] (get_symbol_pos+0x3c/0x170) [ 3.705582] [<c03b3f04>] (get_symbol_pos) from [<c03b45d8>] (kallsyms_lookup+0x40/0xbc) [ 3.713961] [<c03b45d8>] (kallsyms_lookup) from [<c03b4684>] (__sprint_symbol+0x30/0xcc) [ 3.722430] [<c03b4684>] (__sprint_symbol) from [<c05a65e0>] (symbol_string+0x74/0x80) [ 3.730720] [<c05a65e0>] (symbol_string) from [<c05a89b0>] (pointer+0x3d0/0x554) [ 3.738467] [<c05a89b0>] (pointer) from [<c05a8d10>] (vsnprintf+0x1dc/0x458) [ 3.745845] [<c05a8d10>] (vsnprintf) from [<c05a8f98>] (vscnprintf+0xc/0x24) [ 3.753230] [<c05a8f98>] (vscnprintf) from [<c0386814>] (vprintk_emit+0xec/0x490) [ 3.761057] [<c0386814>] (vprintk_emit) from [<c0386d40>] (vprintk_default+0x20/0x28) [ 3.769251] [<c0386d40>] (vprintk_default) from [<c03d07b8>] (printk+0x2c/0x3c) [ 3.776903] [<c03d07b8>] (printk) from [<c0340bcc>] (__warn+0x64/0x100) [ 3.783827] [<c0340bcc>] (__warn) from [<c0340d18>] (warn_slowpath_null+0x20/0x28) [ 3.791753] [<c0340d18>] (warn_slowpath_null) from [<c047ac9c>] (kernfs_get+0x44/0x48) [ 3.800040] [<c047ac9c>] (kernfs_get) from [<c047bdf0>] (kernfs_new_node+0x2c/0x38) [ 3.808052] [<c047bdf0>] (kernfs_new_node) from [<c047d928>] (kernfs_create_link+0x18/0x6c) [ 3.816800] [<c047d928>] (kernfs_create_link) from [<c047e510>] (sysfs_do_create_link_sd+0x78/0xc4) [ 3.826267] [<c047e510>] (sysfs_do_create_link_sd) from [<c07ea3e4>] (driver_sysfs_add+0x68/0x88) [ 3.835559] [<c07ea3e4>] (driver_sysfs_add) from [<c07eaaa8>] (driver_probe_device+0x18c/0x2c8) [ 3.844669] [<c07eaaa8>] (driver_probe_device) from [<c07e909c>] (bus_for_each_drv+0x60/0x94) [ 3.853597] [<c07e909c>] (bus_for_each_drv) from [<c07ea83c>] (__device_attach+0xb0/0x114) [ 3.862247] [<c07ea83c>] (__device_attach) from [<c07e9e78>] (bus_probe_device+0x84/0x8c) [ 3.870816] [<c07e9e78>] (bus_probe_device) from [<c07ea350>] (deferred_probe_work_func+0x68/0x94) [ 3.880201] [<c07ea350>] (deferred_probe_work_func) from [<c0356e50>] (process_one_work+0x1ec/0x414) [ 3.889767] [<c0356e50>] (process_one_work) from [<c0357d40>] (worker_thread+0x27c/0x594) [ 3.898321] [<c0357d40>] (worker_thread) from [<c035c908>] (kthread+0xdc/0xf4) [ 3.905878] [<c035c908>] (kthread) from [<c0307d38>] (ret_from_fork+0x14/0x3c) [ 3.913436] Code: e34c00f8 ebff8e8c eafffff2 e59032f8 (e5130014) [ 3.919814] ---[ end trace 972955aed0ea059b ]--- [ 3.924638] Fixing recursive fault but reboot is needed!
[PYBOOT] [omap5uevm 02:21]: Timed out waiting for "<type 'str'>":
[PYBOOT] [omap5uevm 02:22]: got exception: timeout ~$off
[PYBOOT] [omap5uevm 02:23]: Done. Board omap5uevm-arm-multi_v7_defconfig failure log: -------------------------------------------------
[ 1.866625] mmcblk0: mmc0:0001 SEM04G 3.69 GiB [ 1.871596] mmcblk0boot0: mmc0:0001 SEM04G partition 1 2.00 MiB [ 1.878122] mmcblk0boot1: mmc0:0001 SEM04G partition 2 2.00 MiB [ 1.890311] palmas 0-0048: Muxing GPIO 3, PWM 0, LED 0 [ 1.902631] palmas-rtc 48070000.i2c:palmas@48:rtc: rtc core: registered 48070000.i2c:palmas as rtc0 [ 1.918445] SMPS6: supplied by vsys_cobra [ 1.923806] random: fast init done [ 1.927544] SMPS7: supplied by vsys_cobra [ 1.932504] vdds_1v8_main: supplied by smps7 [ 1.937901] SMPS8: supplied by vsys_cobra [ 1.943667] SMPS9: supplied by vsys_cobra [ 1.948198] smps9: Bringing 0uV into 2100000-2100000uV [ 1.956475] LDO1: supplied by vsys_cobra [ 1.960899] ldo1: Bringing 0uV into 1800000-1800000uV [ 1.967473] LDO2: supplied by vsys_cobra [ 1.971916] ldo2: Bringing 0uV into 2800000-2800000uV [ 1.978457] LDO3: supplied by vdds_1v8_main [ 1.984466] LDO4: supplied by vdds_1v8_main [ 1.989382] ldo4: Bringing 0uV into 1800000-1800000uV [ 1.995986] LDO5: supplied by vsys_cobra [ 2.001736] LDO6: supplied by vdds_1v8_main [ 2.009253] LDO7: supplied by vsys_cobra [ 2.013683] ldo7: Bringing 0uV into 2000000-2000000uV [ 2.020327] LDO8: supplied by vsys_cobra [ 2.026079] LDO9: supplied by vmmcsd_fixed [ 2.032220] LDOLN: supplied by vsys_cobra [ 2.038066] LDOUSB: supplied by vsys_cobra [ 2.046764] at24 0-0050: 256 byte 24c02 EEPROM, writable, 1 bytes/write [ 2.053721] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 2.060381] 4-0022 supply vcc not found, using dummy regulator [ 2.087726] omap_i2c 4807c000.i2c: bus 4 rev0.12 at 400 kHz [ 2.095927] cpufreq: cpufreq_online: CPU0: Running at unlisted freq: 1100000 KHz [ 2.103857] cpufreq: cpufreq_online: CPU0: Unlisted initial frequency changed to: 1500000 KHz
[PYBOOT] [omap5uevm 02:09]: Timed out waiting for "<type 'str'>":
[PYBOOT] [omap5uevm 02:10]: got exception: timeout ~$off
[PYBOOT] [omap5uevm 02:11]: Done. Board pit-arm-exynos_defconfig failure log: -------------------------------------------------
[ 4.572377] ---[ end trace edf2e11f42fc897a ]--- [ 4.576972] Fixing recursive fault but reboot is needed! [ 21.725123] BUG: spinlock lockup suspected on CPU#0, kworker/0:3/69 [ 21.729904] lock: 0xee755880, .magic: dead4ead, .owner: kworker/0:3/69, .owner_cpu: 0 [ 21.737797] CPU: 0 PID: 69 Comm: kworker/0:3 Tainted: G D W 4.9.0-rc7-next-20161129 #1 [ 21.746644] Hardware name: SAMSUNG EXYNOS (Flattened Device Tree) [ 21.752728] [<c010e124>] (unwind_backtrace) from [<c010ae00>] (show_stack+0x10/0x14) [ 21.760447] [<c010ae00>] (show_stack) from [<c0333020>] (dump_stack+0x78/0x8c) [ 21.767646] [<c0333020>] (dump_stack) from [<c015c64c>] (do_raw_spin_lock+0xfc/0x1e0) [ 21.775450] [<c015c64c>] (do_raw_spin_lock) from [<c06fb9dc>] (__schedule+0x7c/0x480) [ 21.783256] [<c06fb9dc>] (__schedule) from [<c06fbe2c>] (schedule+0x4c/0xac) [ 21.790283] [<c06fbe2c>] (schedule) from [<c011e0c4>] (do_exit+0x850/0xa14) [ 21.797223] [<c011e0c4>] (do_exit) from [<c010b03c>] (die+0x238/0x2f4) [ 21.803733] [<c010b03c>] (die) from [<c0115298>] (__do_kernel_fault.part.0+0x64/0x1e4) [ 21.811626] [<c0115298>] (__do_kernel_fault.part.0) from [<c0110c88>] (do_bad_area+0x0/0x8c) [ 21.820039] [<c0110c88>] (do_bad_area) from [<c01109f4>] (do_page_fault+0x0/0x294) [ 21.827584] [<c01109f4>] (do_page_fault) from [<edb7db8b>] (0xedb7db8b) [ 21.834177] NMI backtrace for cpu 0 [ 21.837647] CPU: 0 PID: 69 Comm: kworker/0:3 Tainted: G D W 4.9.0-rc7-next-20161129 #1 [ 21.846494] Hardware name: SAMSUNG EXYNOS (Flattened Device Tree) [ 21.852574] [<c010e124>] (unwind_backtrace) from [<c010ae00>] (show_stack+0x10/0x14) [ 21.860291] [<c010ae00>] (show_stack) from [<c0333020>] (dump_stack+0x78/0x8c) [ 21.867492] [<c0333020>] (dump_stack) from [<c0336888>] (nmi_cpu_backtrace+0xb0/0xb4) [ 21.875298] [<c0336888>] (nmi_cpu_backtrace) from [<c033699c>] (nmi_trigger_cpumask_backtrace+0x110/0x154) [ 21.884927] [<c033699c>] (nmi_trigger_cpumask_backtrace) from [<c015c65c>] (do_raw_spin_lock+0x10c/0x1e0) [ 21.894469] [<c015c65c>] (do_raw_spin_lock) from [<c06fb9dc>] (__schedule+0x7c/0x480) [ 21.902277] [<c06fb9dc>] (__schedule) from [<c06fbe2c>] (schedule+0x4c/0xac) [ 21.909304] [<c06fbe2c>] (schedule) from [<c011e0c4>] (do_exit+0x850/0xa14) [ 21.916244] [<c011e0c4>] (do_exit) from [<c010b03c>] (die+0x238/0x2f4) [ 21.922751] [<c010b03c>] (die) from [<c0115298>] (__do_kernel_fault.part.0+0x64/0x1e4) [ 21.930644] [<c0115298>] (__do_kernel_fault.part.0) from [<c0110c88>] (do_bad_area+0x0/0x8c) [ 21.939059] [<c0110c88>] (do_bad_area) from [<c01109f4>] (do_page_fault+0x0/0x294) [ 21.946605] [<c01109f4>] (do_page_fault) from [<edb7db8b>] (0xedb7db8b)
[PYBOOT] [pit 01:49]: Timed out waiting for "<type 'str'>":
[PYBOOT] [pit 01:50]: got exception: timeout ~$off
[PYBOOT] [pit 01:51]: Done. Board snowball-arm-multi_v7_defconfig failure log: -------------------------------------------------
[....] Cleaning up temporary files...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0c[ 8.225677] JBD2: Spotted dirty metadata buffer (dev = mmcblk3p4, blocknr = 0). There's a risk of filesystem corruption in case of system crash. . [ 8.251220] JBD2: Spotted dirty metadata buffer (dev = mmcblk3p4, blocknr = 0). There's a risk of filesystem corruption in case of system crash. [ 8.609985] random: crng init done [....] Setting kernel variables ...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [....] Configuring network interfaces...[ 9.017303] smsc911x 50000000.ethernet eth0: MAC Address: 08:00:08:1e:0f:44 Internet Systems Consortium DHCP Client 4.2.2 Copyright 2004-2011 Internet Systems Consortium. All rights reserved. For info, please visit https://www.isc.org/software/dhcp/
[ 9.299499] SMSC LAN8700 50000000.etherne:01: attached PHY driver [SMSC LAN8700] (mii_bus:phy_addr=50000000.etherne:01, irq=-1) [ 9.339233] smsc911x 50000000.ethernet eth0: SMSC911x/921x identified at 0xf0a80000, IRQ: 219 [ 9.348052] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready Listening on LPF/eth0/08:00:08:1e:0f:44 Sending on LPF/eth0/08:00:08:1e:0f:44 Sending on Socket/fallback DHCPREQUEST on eth0 to 255.255.255.255 port 67 [ 11.419616] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready DHCPREQUEST on eth0 to 255.255.255.255 port 67 DHCPACK from 172.16.20.1 bound to 172.16.20.108 -- renewal in 37958 seconds. [?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [....] Cleaning up temporary files...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0c. INIT: Entering runlevel: 2 [[36minfo[39;49m] Using makefile-style concurrent boot in runlevel 2. [....] Starting enhanced syslogd: rsyslogd[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0c. [....] Starting web server: apache2cu: Got hangup signal Connected. cu: waitpid: No child processes Connected.
Disconnected.
[PYBOOT] [snowball 03:28]: Timed out waiting for "<type 'str'>":
[PYBOOT] [snowball 03:29]: got exception: timeout ~$off
[PYBOOT] [snowball 03:30]: Done.