mainline boot: 49 passed 28 failed (mainline/v4.6-rc7)

Full logs are available at http://arm-soc.lixom.net/bootlogs/mainline/v4.6-rc7/

Failed boards:

arndale arm-multi_v7_nosmp_defconfig : FAILED 1:10.71 bbb arm-omap2plus_defconfig : FAILED 1:54.19 bbb arm-multi_v7_defconfig : FAILED 1:59.47 bbb arm-multi_v7_nosmp_defconfig : FAILED 2:14.93 beagleboard-x15 arm-omap2plus_defconfig : FAILED 1:43.53 beagleboard-x15 arm-multi_v7_defconfig : FAILED 1:42.97 beagleboard-x15 arm-multi_lpae_defconfig : FAILED 1:44.66 beagleboard-x15 arm-multi_v7_nosmp_defconfig : FAILED 1:54.65 chitra powerpc-pasemi_defconfig : BUILD FAILED colombus arm-multi_v7_nosmp_defconfig : FAILED 3:20.24 cosmic arm-imx_v6_v7_defconfig : FAILED 2:01.49 cosmic arm-multi_v7_defconfig : FAILED 2:20.86 cosmic arm-multi_v7_nosmp_defconfig : FAILED 2:03.31 dalmore arm-tegra_defconfig : FAILED 1:48.15 dalmore arm-multi_v7_defconfig : FAILED 2:01.21 dalmore arm-multi_lpae_defconfig : FAILED 1:56.09 dalmore arm-multi_v7_nosmp_defconfig : FAILED 1:56.36 minnowmax minnowmax_defconfig : NO BUILD odroidu3 arm-exynos_defconfig : FAILED 1:55.05 omap5uevm arm-multi_v7_defconfig : FAILED 2:10.06 omap5uevm arm-multi_lpae_defconfig : FAILED 0:50.02 omap5uevm arm-multi_v7_nosmp_defconfig : FAILED 1:44.27 seaboard arm-tegra_defconfig : FAILED 1:49.65 seaboard arm-multi_v7_defconfig : FAILED 1:50.00 seaboard arm-multi_v7_nosmp_defconfig : FAILED 2:04.94 snow arm-multi_v7_nosmp_defconfig : FAILED 3:13.29 snowball arm-u8500_defconfig : FAILED 1:56.13 snowball arm-multi_v7_defconfig : FAILED 2:09.18 snowball arm-multi_v7_nosmp_defconfig : FAILED 2:03.78 wandboard arm-imx_v6_v7_defconfig : FAILED 2:57.21

Successful boards:

apc arm-vt8500_v6_v7_defconfig : passed 1:12.47 arndale arm-exynos_defconfig : passed 1:34.88 arndale arm-multi_v7_defconfig : passed 1:27.12 arndale arm-multi_lpae_defconfig : passed 1:25.19 capri arm-bcm_defconfig : passed 0:47.81 capri arm-multi_v7_defconfig : passed 0:53.04 capri arm-multi_v7_nosmp_defconfig : warnings 0:50.61 chitra powerpc-ppc64_defconfig : passed 2:10.53 colombus arm-sunxi_defconfig : passed 2:28.15 colombus arm-multi_v7_defconfig : passed 2:41.25 colombus arm-multi_lpae_defconfig : passed 2:28.99 cubie arm-sunxi_defconfig : passed 0:56.24 cubie arm-multi_v7_defconfig : passed 0:53.97 cubie arm-multi_v7_nosmp_defconfig : passed 0:59.21 cubie2 arm-sunxi_defconfig : passed 0:52.45 cubie2 arm-multi_v7_defconfig : passed 0:53.23 cubie2 arm-multi_lpae_defconfig : passed 0:57.42 cubie2 arm-multi_v7_nosmp_defconfig : warnings 1:01.83 cubox arm-multi_v7_defconfig : passed 1:27.99 cubox arm-mvebu_v7_defconfig : passed 1:04.57 cubox arm-multi_v7_nosmp_defconfig : passed 1:14.71 hummingboard arm-imx_v6_v7_defconfig : passed 1:32.41 hummingboard arm-multi_v7_defconfig : passed 1:30.87 hummingboard arm-multi_v7_nosmp_defconfig : warnings 1:12.42 jetsontk1 arm-tegra_defconfig : passed 1:31.54 jetsontk1 arm-multi_v7_defconfig : passed 1:39.68 jetsontk1 arm-multi_lpae_defconfig : passed 1:48.50 jetsontk1 arm-multi_v7_nosmp_defconfig : warnings 1:37.45 omap5uevm arm-omap2plus_defconfig : passed 1:04.77 pandaes arm-omap2plus_defconfig : warnings 1:41.23 pandaes arm-multi_v7_defconfig : passed 1:43.69 pandaes arm-multi_v7_nosmp_defconfig : warnings 1:42.99 pi arm-exynos_defconfig : passed 2:07.69 pi arm-multi_v7_defconfig : passed 2:19.23 pi arm-multi_lpae_defconfig : passed 2:17.78 pi arm-multi_v7_nosmp_defconfig : warnings 2:10.87 pit arm-exynos_defconfig : passed 2:10.26 pit arm-multi_v7_defconfig : passed 2:13.40 pit arm-multi_lpae_defconfig : passed 2:18.37 pit arm-multi_v7_nosmp_defconfig : warnings 2:13.47 seattle arm64-defconfig : warnings 2:21.54 snow arm-exynos_defconfig : passed 2:04.07 snow arm-multi_v7_defconfig : passed 2:09.52 snow arm-multi_lpae_defconfig : passed 1:58.93 trimslice arm-tegra_defconfig : passed 1:31.87 trimslice arm-multi_v7_defconfig : passed 1:39.87 trimslice arm-multi_v7_nosmp_defconfig : warnings 1:56.92 wandboard arm-multi_v7_defconfig : passed 1:12.61 wandboard arm-multi_v7_nosmp_defconfig : warnings 1:18.23

Offline boards:

beaver arm-tegra_defconfig : OFFLINE 2:10.91 beaver arm-multi_v7_defconfig : OFFLINE 2:23.62 beaver arm-multi_v7_nosmp_defconfig : OFFLINE 2:14.58 colibri-vf61 arm-imx_v6_v7_defconfig : OFFLINE 2:15.92 colibri-vf61 arm-multi_v7_defconfig : OFFLINE 2:25.65 colibri-vf61 arm-multi_v7_nosmp_defconfig : OFFLINE 2:35.47 parallella arm-multi_v7_defconfig : OFFLINE 2:35.19 parallella arm-multi_v7_nosmp_defconfig : OFFLINE 2:13.34 rk3288evb arm-multi_v7_defconfig : OFFLINE 0:52.13 rk3288evb arm-multi_lpae_defconfig : OFFLINE 0:46.82 rk3288evb arm-multi_v7_nosmp_defconfig : OFFLINE 0:59.34 sama5 arm-sama5_defconfig : OFFLINE 2:15.70 sama5d3-xplained arm-sama5_defconfig : OFFLINE 2:37.40 socfpga arm-socfpga_defconfig : OFFLINE 2:19.50 socfpga arm-multi_v7_defconfig : OFFLINE 2:28.15 socfpga arm-multi_v7_nosmp_defconfig : OFFLINE 2:14.16

Board legend is available at http://arm-soc.lixom.net/boards.html

Board arndale-arm-multi_v7_nosmp_defconfig failure log: -------------------------------------------------

[ 1.999270] ThumbEE CPU extension supported. [ 2.004362] ahci 122f0000.sata: couldn't get PHY in node sata: -517 [ 2.013863] input: gpio_keys as /devices/platform/gpio_keys/input/input0 [ 2.019281] hctosys: unable to open rtc device (rtc0) [ 2.028253] MAIN_DC: disabling [ 2.029852] hdmi-en: disabling [ 2.033256] ahci 122f0000.sata: couldn't get PHY in node sata: -517 [ 2.040285] Unable to handle kernel paging request at virtual address c10b5928 [ 2.046315] pgd = c0204000 [ 2.049005] [c10b5928] *pgd=4100041e(bad) [ 2.053001] Internal error: Oops: 8000000d [#1] ARM [ 2.057859] Modules linked in: [ 2.060900] CPU: 0 PID: 0 Comm: swapper Tainted: G W 4.6.0-rc7 #1 [ 2.068101] Hardware name: SAMSUNG EXYNOS (Flattened Device Tree) [ 2.074178] task: c1006570 ti: c1000000 task.ti: c1000000 [ 2.079561] PC is at 0xc10b5928 [ 2.082691] LR is at cpu_pm_pmu_notify+0x70/0xb4 [ 2.087285] pc : [<c10b5928>] lr : [<c0984e64>] psr: 600001d3 [ 2.087285] sp : c1001f88 ip : 00000000 fp : 00000000 [ 2.098741] r10: c10b6420 r9 : 00000000 r8 : 000000a0 [ 2.103949] r7 : c10b6470 r6 : c10b5930 r5 : 00000000 r4 : c100212c [ 2.110459] r3 : 00000006 r2 : 00000000 r1 : 00000006 r0 : 00000001 [ 2.116971] Flags: nZCv IRQs off FIQs off Mode SVC_32 ISA ARM Segment none [ 2.124261] Control: 10c53c7d Table: 40204059 DAC: 00000051 [ 2.129989] Process swapper (pid: 0, stack limit = 0xc1000218) [ 2.135806] Stack: (0xc1001f88 to 0xc1002000) [ 2.140149] 1f80: c10fef5d c1002134 c10b5930 c10b63d0 c1001fac c0a8f770 [ 2.148308] 1fa0: c1000000 c100212c c1001fb4 c0a8f974 00000000 c035856c ffffffff c0f00c3c [ 2.156467] 1fc0: ffffffff ffffffff 00000000 c0f00684 00000000 c0f88a20 c11011d4 c10020b4 [ 2.164625] 1fe0: c0f88a1c c100772c 40204059 410fc0f4 00000000 40208078 00000000 00000000 [ 2.172795] [<c0984e64>] (cpu_pm_pmu_notify) from [<c0a8f770>] (schedule+0x44/0x9c) [ 2.180426] Code: c10b5914 c10b5a60 c10b5a60 00000000 (c10b5930) [ 2.186499] ---[ end trace cb88537fdc8fa202 ]--- [ 2.191098] Kernel panic - not syncing: Attempted to kill the idle task! [ 2.197782] ---[ end Kernel panic - not syncing: Attempted to kill the idle task!

[PYBOOT] [arndale 01:08]: got exception: panic ~$off

[PYBOOT] [arndale 01:09]: Done. Board bbb-arm-multi_v7_defconfig failure log: -------------------------------------------------

[ 1.625990] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.636237] ledtrig-cpu: registered to indicate activity on CPUs [ 1.643337] usbcore: registered new interface driver usbhid [ 1.649264] usbhid: USB HID core driver [ 1.661259] NET: Registered protocol family 10 [ 1.667837] sit: IPv6 over IPv4 tunneling driver [ 1.673973] NET: Registered protocol family 17 [ 1.678742] can: controller area network core (rev 20120528 abi 9) [ 1.685380] NET: Registered protocol family 29 [ 1.690104] can: raw protocol (rev 20120528) [ 1.694629] can: broadcast manager protocol (rev 20120528 t) [ 1.700627] can: netlink gateway (rev 20130117) max_hops=1 [ 1.707397] Key type dns_resolver registered [ 1.712306] omap_voltage_late_init: Voltage driver support not added [ 1.720581] ThumbEE CPU extension supported. [ 1.725209] Registering SWP/SWPB emulation handler [ 1.767445] tps65217 0-0024: TPS65217 ID 0xe version 1.2 [ 1.773977] at24 0-0050: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.781747] omap_i2c 44e0b000.i2c: bus 0 rev0.11 at 400 kHz [ 1.790445] at24 2-0054: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.798349] at24 2-0055: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.806173] at24 2-0056: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.813988] at24 2-0057: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.821340] omap_i2c 4819c000.i2c: bus 2 rev0.11 at 100 kHz [ 1.829999] cpufreq: cpufreq_online: CPU0: Running at unlisted freq: 550000 KHz [ 1.837923] cpufreq: cpufreq_online: CPU0: Unlisted initial frequency changed to: 600000 KHz [ 1.847657] mmc1: new high speed MMC card at address 0001 [ 1.854901] hctosys: unable to open rtc device (rtc0) [ 1.867896] mmcblk1: mmc1:0001 MMC02G 1.79 GiB [ 1.873910] mmcblk1boot0: mmc1:0001 MMC02G partition 1 1.00 MiB [ 1.880880] mmcblk1boot1: mmc1:0001 MMC02G partition 2 1.00 MiB [ 1.889714] mmcblk1: p1 p2 [ 1.895410] Waiting for root device /dev/mmcblk0p2...

[PYBOOT] [bbb 01:56]: Timed out waiting for "<type 'str'>":

[PYBOOT] [bbb 01:57]: got exception: timeout ~$off

[PYBOOT] [bbb 01:58]: Done. Board bbb-arm-multi_v7_nosmp_defconfig failure log: -------------------------------------------------

[ 1.322432] sdhci: Secure Digital Host Controller Interface driver [ 1.328957] sdhci: Copyright(c) Pierre Ossman [ 1.334759] omap_hsmmc 48060000.mmc: Got CD GPIO [ 1.397425] Synopsys Designware Multimedia Card Interface Driver [ 1.404821] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.414037] ledtrig-cpu: registered to indicate activity on CPUs [ 1.420782] usbcore: registered new interface driver usbhid [ 1.426659] usbhid: USB HID core driver [ 1.436338] NET: Registered protocol family 10 [ 1.442830] sit: IPv6 over IPv4 tunneling driver [ 1.448728] NET: Registered protocol family 17 [ 1.453466] can: controller area network core (rev 20120528 abi 9) [ 1.460064] NET: Registered protocol family 29 [ 1.464757] can: raw protocol (rev 20120528) [ 1.469270] can: broadcast manager protocol (rev 20120528 t) [ 1.475248] can: netlink gateway (rev 20130117) max_hops=1 [ 1.481833] Key type dns_resolver registered [ 1.486681] omap_voltage_late_init: Voltage driver support not added [ 1.494481] ThumbEE CPU extension supported. [ 1.507103] at24 0-0050: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.514666] omap_i2c 44e0b000.i2c: bus 0 rev0.11 at 400 kHz [ 1.522739] at24 2-0054: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.530478] at24 2-0055: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.538163] at24 2-0056: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.545840] at24 2-0057: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.553123] omap_i2c 4819c000.i2c: bus 2 rev0.11 at 100 kHz [ 1.560798] hctosys: unable to open rtc device (rtc0) [ 1.571573] Waiting for root device /dev/mmcblk0p2... [ 1.606685] mmc1: new high speed MMC card at address 0001 [ 1.613158] mmcblk1: mmc1:0001 MMC02G 1.79 GiB [ 1.618221] mmcblk1boot0: mmc1:0001 MMC02G partition 1 1.00 MiB [ 1.624702] mmcblk1boot1: mmc1:0001 MMC02G partition 2 1.00 MiB [ 1.633150] mmcblk1: p1 p2

[PYBOOT] [bbb 02:12]: Timed out waiting for "<type 'str'>":

[PYBOOT] [bbb 02:13]: got exception: timeout ~$off

[PYBOOT] [bbb 02:14]: Done. Board bbb-arm-omap2plus_defconfig failure log: -------------------------------------------------

[ 2.031337] omap_hsmmc 481d8000.mmc: lookup for GPIO cd failed [ 2.037456] omap_hsmmc 481d8000.mmc: GPIO lookup for consumer wp [ 2.043796] omap_hsmmc 481d8000.mmc: using device tree for GPIO lookup [ 2.050671] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@481d8000[0]' [ 2.060265] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@481d8000[0]' [ 2.069761] omap_hsmmc 481d8000.mmc: using lookup tables for GPIO lookup [ 2.076776] omap_hsmmc 481d8000.mmc: lookup for GPIO wp failed [ 2.120202] ledtrig-cpu: registered to indicate activity on CPUs [ 2.128864] oprofile: using arm/armv7 [ 2.133960] Initializing XFRM netlink socket [ 2.139037] NET: Registered protocol family 10 [ 2.149757] sit: IPv6 over IPv4 tunneling driver [ 2.158509] NET: Registered protocol family 17 [ 2.163433] NET: Registered protocol family 15 [ 2.168672] Key type dns_resolver registered [ 2.173603] omap_voltage_late_init: Voltage driver support not added [ 2.180346] sr_dev_init: No voltage domain specified for smartreflex0. Cannot initialize [ 2.188814] sr_dev_init: No voltage domain specified for smartreflex1. Cannot initialize [ 2.199054] ThumbEE CPU extension supported. [ 2.203701] Registering SWP/SWPB emulation handler [ 2.208732] SmartReflex Class3 initialized [ 2.277861] tps65217 0-0024: TPS65217 ID 0xe version 1.2 [ 2.285131] omap_i2c 44e0b000.i2c: bus 0 rev0.11 at 400 kHz [ 2.295625] mmc1: new high speed MMC card at address 0001 [ 2.307716] omap_i2c 4819c000.i2c: bus 2 rev0.11 at 100 kHz [ 2.315999] mmcblk1: mmc1:0001 MMC02G 1.79 GiB [ 2.323781] hctosys: unable to open rtc device (rtc0) [ 2.329104] sr_init: No PMIC hook to init smartreflex [ 2.334883] sr_init: platform driver register failed for SR [ 2.374772] mmcblk1boot0: mmc1:0001 MMC02G partition 1 1.00 MiB [ 2.382756] mmcblk1boot1: mmc1:0001 MMC02G partition 2 1.00 MiB [ 2.396980] mmcblk1: p1 p2 [ 2.414393] Waiting for root device /dev/mmcblk0p2...

[PYBOOT] [bbb 01:51]: Timed out waiting for "<type 'str'>":

[PYBOOT] [bbb 01:52]: got exception: timeout ~$off

[PYBOOT] [bbb 01:53]: Done. Board beagleboard-x15-arm-multi_lpae_defconfig failure log: -------------------------------------------------

[ 1.717564] at24 0-0050: 4096 byte 24c32 EEPROM, writable, 1 bytes/write [ 1.724646] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 1.750773] rtc-ds1307 2-006f: SET TIME! [ 1.756509] rtc-ds1307 2-006f: rtc core: registered mcp7941x as rtc0 [ 1.763257] rtc-ds1307 2-006f: 64 bytes nvram [ 1.767871] omap_i2c 48060000.i2c: bus 2 rev0.12 at 400 kHz [ 1.776069] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller [ 1.781850] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1 [ 1.790091] xhci-hcd xhci-hcd.0.auto: hcc params 0x0220f04c hci version 0x100 quirks 0x00010010 [ 1.799249] xhci-hcd xhci-hcd.0.auto: irq 400, io mem 0x48890000 [ 1.806122] hub 1-0:1.0: USB hub found [ 1.810072] hub 1-0:1.0: 1 port detected [ 1.814469] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller [ 1.820245] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2 [ 1.828361] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. [ 1.837381] hub 2-0:1.0: USB hub found [ 1.841349] hub 2-0:1.0: 1 port detected [ 1.847373] omap_hsmmc 4809c000.mmc: Got CD GPIO [ 1.881401] vdd_3v3: supplied by regen1 [ 1.919488] rtc-ds1307 2-006f: setting system clock to 2001-01-01 00:00:00 UTC (978307200) [ 1.937443] aic_dvdd_fixed: disabling [ 1.942175] Waiting for root device /dev/mmcblk0p1... [ 1.969341] mmc1: new high speed MMC card at address 0001 [ 1.975317] mmcblk1: mmc1:0001 S10004 3.56 GiB [ 1.980182] mmcblk1boot0: mmc1:0001 S10004 partition 1 4.00 MiB [ 1.986515] mmcblk1boot1: mmc1:0001 S10004 partition 2 4.00 MiB [ 1.993380] mmcblk1: p1 [ 2.120274] usb 1-1: new high-speed USB device number 2 using xhci-hcd [ 2.155300] usb 2-1: new SuperSpeed USB device number 2 using xhci-hcd [ 2.180473] hub 2-1:1.0: USB hub found [ 2.184451] hub 2-1:1.0: 4 ports detected [ 2.276494] hub 1-1:1.0: USB hub found [ 2.280474] hub 1-1:1.0: 4 ports detected

[PYBOOT] [beagleboard-x15 01:41]: Timed out waiting for "<type 'str'>":

[PYBOOT] [beagleboard-x15 01:42]: got exception: timeout ~$off

[PYBOOT] [beagleboard-x15 01:43]: Done. Board beagleboard-x15-arm-multi_v7_defconfig failure log: -------------------------------------------------

[ 1.717232] at24 0-0050: 4096 byte 24c32 EEPROM, writable, 1 bytes/write [ 1.724318] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 1.750477] rtc-ds1307 2-006f: SET TIME! [ 1.756226] rtc-ds1307 2-006f: rtc core: registered mcp7941x as rtc0 [ 1.762983] rtc-ds1307 2-006f: 64 bytes nvram [ 1.767598] omap_i2c 48060000.i2c: bus 2 rev0.12 at 400 kHz [ 1.775804] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller [ 1.781592] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1 [ 1.789837] xhci-hcd xhci-hcd.0.auto: hcc params 0x0220f04c hci version 0x100 quirks 0x00010010 [ 1.799004] xhci-hcd xhci-hcd.0.auto: irq 400, io mem 0x48890000 [ 1.805878] hub 1-0:1.0: USB hub found [ 1.809834] hub 1-0:1.0: 1 port detected [ 1.814229] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller [ 1.820006] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2 [ 1.828115] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. [ 1.837133] hub 2-0:1.0: USB hub found [ 1.841103] hub 2-0:1.0: 1 port detected [ 1.847131] omap_hsmmc 4809c000.mmc: Got CD GPIO [ 1.881107] vdd_3v3: supplied by regen1 [ 1.919171] rtc-ds1307 2-006f: setting system clock to 2001-01-01 00:00:00 UTC (978307200) [ 1.937115] aic_dvdd_fixed: disabling [ 1.941842] Waiting for root device /dev/mmcblk0p1... [ 1.969019] mmc1: new high speed MMC card at address 0001 [ 1.975003] mmcblk1: mmc1:0001 S10004 3.56 GiB [ 1.979868] mmcblk1boot0: mmc1:0001 S10004 partition 1 4.00 MiB [ 1.986198] mmcblk1boot1: mmc1:0001 S10004 partition 2 4.00 MiB [ 1.993059] mmcblk1: p1 [ 2.119973] usb 1-1: new high-speed USB device number 2 using xhci-hcd [ 2.154998] usb 2-1: new SuperSpeed USB device number 2 using xhci-hcd [ 2.180226] hub 2-1:1.0: USB hub found [ 2.184204] hub 2-1:1.0: 4 ports detected [ 2.276249] hub 1-1:1.0: USB hub found [ 2.280237] hub 1-1:1.0: 4 ports detected

[PYBOOT] [beagleboard-x15 01:40]: Timed out waiting for "<type 'str'>":

[PYBOOT] [beagleboard-x15 01:41]: got exception: timeout ~$off

[PYBOOT] [beagleboard-x15 01:42]: Done. Board beagleboard-x15-arm-multi_v7_nosmp_defconfig failure log: -------------------------------------------------

[ 1.591512] at24 0-0050: 4096 byte 24c32 EEPROM, writable, 1 bytes/write [ 1.598563] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 1.623911] rtc-ds1307 2-006f: SET TIME! [ 1.629533] rtc-ds1307 2-006f: rtc core: registered mcp7941x as rtc0 [ 1.636238] rtc-ds1307 2-006f: 64 bytes nvram [ 1.640827] omap_i2c 48060000.i2c: bus 2 rev0.12 at 400 kHz [ 1.648211] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller [ 1.653985] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1 [ 1.662190] xhci-hcd xhci-hcd.0.auto: hcc params 0x0220f04c hci version 0x100 quirks 0x00010010 [ 1.671333] xhci-hcd xhci-hcd.0.auto: irq 400, io mem 0x48890000 [ 1.678051] hub 1-0:1.0: USB hub found [ 1.682000] hub 1-0:1.0: 1 port detected [ 1.686311] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller [ 1.692071] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2 [ 1.700148] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. [ 1.709017] hub 2-0:1.0: USB hub found [ 1.712955] hub 2-0:1.0: 1 port detected [ 1.718204] omap_hsmmc 4809c000.mmc: Got CD GPIO [ 1.754149] vdd_3v3: supplied by regen1 [ 1.785236] rtc-ds1307 2-006f: setting system clock to 2001-01-01 00:00:00 UTC (978307200) [ 1.798344] aic_dvdd_fixed: disabling [ 1.803719] Waiting for root device /dev/mmcblk0p1... [ 1.850448] mmc1: new high speed MMC card at address 0001 [ 1.856317] mmcblk1: mmc1:0001 S10004 3.56 GiB [ 1.861145] mmcblk1boot0: mmc1:0001 S10004 partition 1 4.00 MiB [ 1.867438] mmcblk1boot1: mmc1:0001 S10004 partition 2 4.00 MiB [ 1.874222] mmcblk1: p1 [ 1.993451] usb 1-1: new high-speed USB device number 2 using xhci-hcd [ 2.023470] usb 2-1: new SuperSpeed USB device number 2 using xhci-hcd [ 2.052251] hub 2-1:1.0: USB hub found [ 2.056228] hub 2-1:1.0: 4 ports detected [ 2.148251] hub 1-1:1.0: USB hub found [ 2.152217] hub 1-1:1.0: 4 ports detected

[PYBOOT] [beagleboard-x15 01:51]: Timed out waiting for "<type 'str'>":

[PYBOOT] [beagleboard-x15 01:52]: got exception: timeout ~$off

[PYBOOT] [beagleboard-x15 01:54]: Done. Board beagleboard-x15-arm-omap2plus_defconfig failure log: -------------------------------------------------

[ 2.174032] omap_hsmmc 4809c000.mmc: using device tree for GPIO lookup [ 2.180905] of_get_named_gpiod_flags: parsed 'cd-gpios' property of node '/ocp/mmc@4809c000[0]' - status (0) [ 2.191291] omap_hsmmc 4809c000.mmc: Got CD GPIO [ 2.196159] omap_hsmmc 4809c000.mmc: GPIO lookup for consumer wp [ 2.202452] omap_hsmmc 4809c000.mmc: using device tree for GPIO lookup [ 2.209320] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@4809c000[0]' [ 2.218918] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@4809c000[0]' [ 2.228418] omap_hsmmc 4809c000.mmc: using lookup tables for GPIO lookup [ 2.235475] omap_hsmmc 4809c000.mmc: lookup for GPIO wp failed [ 2.283730] omap_hsmmc 480b4000.mmc: GPIO lookup for consumer cd [ 2.290030] omap_hsmmc 480b4000.mmc: using device tree for GPIO lookup [ 2.296890] of_get_named_gpiod_flags: can't parse 'cd-gpios' property of node '/ocp/mmc@480b4000[0]' [ 2.306489] of_get_named_gpiod_flags: can't parse 'cd-gpio' property of node '/ocp/mmc@480b4000[0]' [ 2.315984] omap_hsmmc 480b4000.mmc: using lookup tables for GPIO lookup [ 2.323034] omap_hsmmc 480b4000.mmc: lookup for GPIO cd failed [ 2.329149] omap_hsmmc 480b4000.mmc: GPIO lookup for consumer wp [ 2.335453] omap_hsmmc 480b4000.mmc: using device tree for GPIO lookup [ 2.342295] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@480b4000[0]' [ 2.351886] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@480b4000[0]' [ 2.361385] omap_hsmmc 480b4000.mmc: using lookup tables for GPIO lookup [ 2.368430] omap_hsmmc 480b4000.mmc: lookup for GPIO wp failed [ 2.375130] vdd_3v3: supplied by regen1 [ 2.413812] hctosys: unable to open rtc device (rtc0) [ 2.419112] sr_init: No PMIC hook to init smartreflex [ 2.424631] sr_init: platform driver register failed for SR [ 2.472046] aic_dvdd_fixed: disabling [ 2.476306] ldousb: disabling [ 2.485450] Waiting for root device /dev/mmcblk0p1... [ 2.535363] mmc1: new high speed MMC card at address 0001 [ 2.543100] mmcblk1: mmc1:0001 S10004 3.56 GiB [ 2.548418] mmcblk1boot0: mmc1:0001 S10004 partition 1 4.00 MiB [ 2.555218] mmcblk1boot1: mmc1:0001 S10004 partition 2 4.00 MiB [ 2.563667] mmcblk1: p1

[PYBOOT] [beagleboard-x15 01:40]: Timed out waiting for "<type 'str'>":

[PYBOOT] [beagleboard-x15 01:41]: got exception: timeout ~$off

[PYBOOT] [beagleboard-x15 01:43]: Done. Board colombus-arm-multi_v7_nosmp_defconfig failure log: -------------------------------------------------

[....] Waiting for /dev to be fully populated...[?25l[?1c7[ ok 8[?25h[?0cdone. [....] Activating swap...[?25l[?1c7[ ok 8[?25h[?0cdone. [ 41.238264] EXT4-fs (mmcblk0p1): warning: mounting fs with errors, running e2fsck is recommended [ 41.252624] EXT4-fs (mmcblk0p1): re-mounted. Opts: (null) [....] Cleaning up temporary files... /tmp[?25l[?1c7[ ok 8[?25h[?0c. [....] Activating lvm and md swap...[?25l[?1c7[ ok 8[?25h[?0cdone. [....] Checking file systems...fsck from util-linux 2.20.1 [?25l[?1c7[ ok 8[?25h[?0cdone. [....] Mounting local filesystems...[?25l[?1c7[ ok 8[?25h[?0cdone. [....] Activating swapfile swap...[?25l[?1c7[ ok 8[?25h[?0cdone. [....] Cleaning up temporary files...[?25l[?1c7[ ok 8[?25h[?0c. [....] Setting kernel variables ...[?25l[?1c7[ ok 8[?25h[?0cdone. [ 84.545983] random: dd urandom read with 57 bits of entropy available [....] Configuring network interfaces...Internet Systems Consortium DHCP Client 4.2.2 Copyright 2004-2011 Internet Systems Consortium. All rights reserved. For info, please visit https://www.isc.org/software/dhcp/

[ 88.930714] eth0: device MAC address e6:81:0b:2c:3b:fb [ 89.087404] RX IPC Checksum Offload disabled [ 89.092010] No MAC Management Counters available [ 89.097769] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready Listening on LPF/eth0/e6:81:0b:2c:3b:fb Sending on LPF/eth0/e6:81:0b:2c:3b:fb Sending on Socket/fallback DHCPREQUEST on eth0 to 255.255.255.255 port 67 DHCPREQUEST on eth0 to 255.255.255.255 port 67 DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 5 DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 11 DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 10 DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 11 DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 7 DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 14

[PYBOOT] [colombus 03:17]: Timed out waiting for "<type 'str'>":

[PYBOOT] [colombus 03:18]: got exception: timeout ~$off

[PYBOOT] [colombus 03:19]: Done. Board cosmic-arm-imx_v6_v7_defconfig failure log: -------------------------------------------------

[ 14.449685] blk_update_request: I/O error, dev mmcblk0, sector 3633185 [ 18.523878] mmcblk0: error -110 transferring data, sector 3633186, nr 230, cmd response 0x900, card status 0x0 [ 18.534203] blk_update_request: I/O error, dev mmcblk0, sector 3633186 [ 22.608445] mmcblk0: error -110 transferring data, sector 3633187, nr 229, cmd response 0x900, card status 0x0 [ 22.618763] blk_update_request: I/O error, dev mmcblk0, sector 3633187 [ 26.692944] mmcblk0: error -110 transferring data, sector 3633188, nr 228, cmd response 0x900, card status 0x0 [ 26.703266] blk_update_request: I/O error, dev mmcblk0, sector 3633188 [ 30.777505] mmcblk0: error -110 transferring data, sector 3633189, nr 227, cmd response 0x900, card status 0x0 [ 30.787828] blk_update_request: I/O error, dev mmcblk0, sector 3633189 [ 34.862015] mmcblk0: error -110 transferring data, sector 3633190, nr 226, cmd response 0x900, card status 0x0 [ 34.872345] blk_update_request: I/O error, dev mmcblk0, sector 3633190 [ 38.946606] mmcblk0: error -110 transferring data, sector 3633191, nr 225, cmd response 0x900, card status 0x0 [ 38.956931] blk_update_request: I/O error, dev mmcblk0, sector 3633191 [ 43.031150] mmcblk0: error -110 transferring data, sector 3633192, nr 224, cmd response 0x900, card status 0x0 [ 43.041475] blk_update_request: I/O error, dev mmcblk0, sector 3633192 [ 47.115863] mmcblk0: error -110 transferring data, sector 3633193, nr 223, cmd response 0x900, card status 0x0 [ 47.126184] blk_update_request: I/O error, dev mmcblk0, sector 3633193 [ 51.200422] mmcblk0: error -110 transferring data, sector 3633194, nr 222, cmd response 0x900, card status 0x0 [ 51.210738] blk_update_request: I/O error, dev mmcblk0, sector 3633194 [ 55.284975] mmcblk0: error -110 transferring data, sector 3633195, nr 221, cmd response 0x900, card status 0x0 [ 55.295291] blk_update_request: I/O error, dev mmcblk0, sector 3633195 [ 59.369522] mmcblk0: error -110 transferring data, sector 3633196, nr 220, cmd response 0x900, card status 0x0 [ 59.379837] blk_update_request: I/O error, dev mmcblk0, sector 3633196 [ 63.454071] mmcblk0: error -110 transferring data, sector 3633197, nr 219, cmd response 0x900, card status 0x0 [ 63.464390] blk_update_request: I/O error, dev mmcblk0, sector 3633197 [ 67.538619] mmcblk0: error -110 transferring data, sector 3633198, nr 218, cmd response 0x900, card status 0x0 [ 67.548936] blk_update_request: I/O error, dev mmcblk0, sector 3633198 [ 71.623113] mmcblk0: error -110 transferring data, sector 3633199, nr 217, cmd response 0x900, card status 0x0 [ 71.633436] blk_update_request: I/O error, dev mmcblk0, sector 3633199 [ 75.707674] mmcblk0: error -110 transferring data, sector 3633200, nr 216, cmd response 0x900, card status 0x0 [ 75.717990] blk_update_request: I/O error, dev mmcblk0, sector 3633200 [ 79.792173] mmcblk0: error -110 transferring data, sector 3633201, nr 215, cmd response 0x900, card status 0x0 [ 79.802493] blk_update_request: I/O error, dev mmcblk0, sector 3633201

[PYBOOT] [cosmic 01:58]: Timed out waiting for "<type 'str'>":

[PYBOOT] [cosmic 01:59]: got exception: timeout ~$off

[PYBOOT] [cosmic 02:00]: Done. Board cosmic-arm-multi_v7_defconfig failure log: -------------------------------------------------

[ 14.078141] blk_update_request: I/O error, dev mmcblk0, sector 3633185 [ 18.152126] mmcblk0: error -110 transferring data, sector 3633186, nr 230, cmd response 0x900, card status 0x0 [ 18.162201] blk_update_request: I/O error, dev mmcblk0, sector 3633186 [ 22.236187] mmcblk0: error -110 transferring data, sector 3633187, nr 229, cmd response 0x900, card status 0x0 [ 22.246261] blk_update_request: I/O error, dev mmcblk0, sector 3633187 [ 26.320251] mmcblk0: error -110 transferring data, sector 3633188, nr 228, cmd response 0x900, card status 0x0 [ 26.330329] blk_update_request: I/O error, dev mmcblk0, sector 3633188 [ 30.404311] mmcblk0: error -110 transferring data, sector 3633189, nr 227, cmd response 0x900, card status 0x0 [ 30.414388] blk_update_request: I/O error, dev mmcblk0, sector 3633189 [ 34.488372] mmcblk0: error -110 transferring data, sector 3633190, nr 226, cmd response 0x900, card status 0x0 [ 34.498450] blk_update_request: I/O error, dev mmcblk0, sector 3633190 [ 38.572441] mmcblk0: error -110 transferring data, sector 3633191, nr 225, cmd response 0x900, card status 0x0 [ 38.582503] blk_update_request: I/O error, dev mmcblk0, sector 3633191 [ 42.656494] mmcblk0: error -110 transferring data, sector 3633192, nr 224, cmd response 0x900, card status 0x0 [ 42.666565] blk_update_request: I/O error, dev mmcblk0, sector 3633192 [ 46.740547] mmcblk0: error -110 transferring data, sector 3633193, nr 223, cmd response 0x900, card status 0x0 [ 46.750616] blk_update_request: I/O error, dev mmcblk0, sector 3633193 [ 50.824606] mmcblk0: error -110 transferring data, sector 3633194, nr 222, cmd response 0x900, card status 0x0 [ 50.834692] blk_update_request: I/O error, dev mmcblk0, sector 3633194 [ 54.908675] mmcblk0: error -110 transferring data, sector 3633195, nr 221, cmd response 0x900, card status 0x0 [ 54.918744] blk_update_request: I/O error, dev mmcblk0, sector 3633195 [ 58.992731] mmcblk0: error -110 transferring data, sector 3633196, nr 220, cmd response 0x900, card status 0x0 [ 59.002805] blk_update_request: I/O error, dev mmcblk0, sector 3633196 [ 63.076789] mmcblk0: error -110 transferring data, sector 3633197, nr 219, cmd response 0x900, card status 0x0 [ 63.086864] blk_update_request: I/O error, dev mmcblk0, sector 3633197 [ 67.160850] mmcblk0: error -110 transferring data, sector 3633198, nr 218, cmd response 0x900, card status 0x0 [ 67.170925] blk_update_request: I/O error, dev mmcblk0, sector 3633198 [ 71.244907] mmcblk0: error -110 transferring data, sector 3633199, nr 217, cmd response 0x900, card status 0x0 [ 71.254984] blk_update_request: I/O error, dev mmcblk0, sector 3633199 [ 75.328971] mmcblk0: error -110 transferring data, sector 3633200, nr 216, cmd response 0x900, card status 0x0 [ 75.339044] blk_update_request: I/O error, dev mmcblk0, sector 3633200 [ 79.413024] mmcblk0: error -110 transferring data, sector 3633201, nr 215, cmd response 0x900, card status 0x0 [ 79.423104] blk_update_request: I/O error, dev mmcblk0, sector 3633201

[PYBOOT] [cosmic 02:18]: Timed out waiting for "<type 'str'>":

[PYBOOT] [cosmic 02:19]: got exception: timeout ~$off

[PYBOOT] [cosmic 02:20]: Done. Board cosmic-arm-multi_v7_nosmp_defconfig failure log: -------------------------------------------------

[ 13.873778] blk_update_request: I/O error, dev mmcblk0, sector 3633185 [ 17.947688] mmcblk0: error -110 transferring data, sector 3633186, nr 230, cmd response 0x900, card status 0x0 [ 17.957743] blk_update_request: I/O error, dev mmcblk0, sector 3633186 [ 22.031660] mmcblk0: error -110 transferring data, sector 3633187, nr 229, cmd response 0x900, card status 0x0 [ 22.041716] blk_update_request: I/O error, dev mmcblk0, sector 3633187 [ 26.115633] mmcblk0: error -110 transferring data, sector 3633188, nr 228, cmd response 0x900, card status 0x0 [ 26.125689] blk_update_request: I/O error, dev mmcblk0, sector 3633188 [ 30.199605] mmcblk0: error -110 transferring data, sector 3633189, nr 227, cmd response 0x900, card status 0x0 [ 30.209662] blk_update_request: I/O error, dev mmcblk0, sector 3633189 [ 34.283579] mmcblk0: error -110 transferring data, sector 3633190, nr 226, cmd response 0x900, card status 0x0 [ 34.293636] blk_update_request: I/O error, dev mmcblk0, sector 3633190 [ 38.367550] mmcblk0: error -110 transferring data, sector 3633191, nr 225, cmd response 0x900, card status 0x0 [ 38.377610] blk_update_request: I/O error, dev mmcblk0, sector 3633191 [ 42.451528] mmcblk0: error -110 transferring data, sector 3633192, nr 224, cmd response 0x900, card status 0x0 [ 42.461593] blk_update_request: I/O error, dev mmcblk0, sector 3633192 [ 46.535505] mmcblk0: error -110 transferring data, sector 3633193, nr 223, cmd response 0x900, card status 0x0 [ 46.545550] blk_update_request: I/O error, dev mmcblk0, sector 3633193 [ 50.619463] mmcblk0: error -110 transferring data, sector 3633194, nr 222, cmd response 0x900, card status 0x0 [ 50.629514] blk_update_request: I/O error, dev mmcblk0, sector 3633194 [ 54.703423] mmcblk0: error -110 transferring data, sector 3633195, nr 221, cmd response 0x900, card status 0x0 [ 54.713478] blk_update_request: I/O error, dev mmcblk0, sector 3633195 [ 58.787393] mmcblk0: error -110 transferring data, sector 3633196, nr 220, cmd response 0x900, card status 0x0 [ 58.797444] blk_update_request: I/O error, dev mmcblk0, sector 3633196 [ 62.871357] mmcblk0: error -110 transferring data, sector 3633197, nr 219, cmd response 0x900, card status 0x0 [ 62.881407] blk_update_request: I/O error, dev mmcblk0, sector 3633197 [ 66.955315] mmcblk0: error -110 transferring data, sector 3633198, nr 218, cmd response 0x900, card status 0x0 [ 66.965373] blk_update_request: I/O error, dev mmcblk0, sector 3633198 [ 71.039290] mmcblk0: error -110 transferring data, sector 3633199, nr 217, cmd response 0x900, card status 0x0 [ 71.049347] blk_update_request: I/O error, dev mmcblk0, sector 3633199 [ 75.123263] mmcblk0: error -110 transferring data, sector 3633200, nr 216, cmd response 0x900, card status 0x0 [ 75.133321] blk_update_request: I/O error, dev mmcblk0, sector 3633200 [ 79.207230] mmcblk0: error -110 transferring data, sector 3633201, nr 215, cmd response 0x900, card status 0x0 [ 79.217285] blk_update_request: I/O error, dev mmcblk0, sector 3633201

[PYBOOT] [cosmic 02:00]: Timed out waiting for "<type 'str'>":

[PYBOOT] [cosmic 02:01]: got exception: timeout ~$off

[PYBOOT] [cosmic 02:02]: Done. Board dalmore-arm-multi_lpae_defconfig failure log: -------------------------------------------------

[ 2.486897] Key type dns_resolver registered [ 2.493303] ThumbEE CPU extension supported. [ 2.497726] Registering SWP/SWPB emulation handler [ 2.547305] vdd-sys-5v0: supplied by vdd_ac_bat [ 2.554354] VDD_5V0_HDMI_CON: supplied by vdd-sys-5v0 [ 2.565330] vdd_hdmi_5v0: supplied by vdd-sys-5v0 [ 2.582129] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 2.584020] mmc1: new high speed MMC card at address 0001 [ 2.587966] mmcblk1: mmc1:0001 SEM32G 29.1 GiB [ 2.591320] mmcblk1boot0: mmc1:0001 SEM32G partition 1 4.00 MiB [ 2.593438] mmcblk1boot1: mmc1:0001 SEM32G partition 2 4.00 MiB [ 2.596965] mmcblk1rpmb: mmc1:0001 SEM32G partition 3 4.00 MiB [ 2.601233] mmcblk1: p1 [ 2.619863] [drm] No driver support for vblank timestamp query. [ 2.791349] Console: switching to colour frame buffer device 240x75 [ 2.878689] drm drm: fb0: frame buffer device [ 2.898957] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 2.909048] usb2_vbus: supplied by vdd-sys-5v0 [ 2.920686] tegra-ehci 7d008000.usb: EHCI Host Controller [ 2.926275] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 1 [ 2.935022] tegra-ehci 7d008000.usb: irq 339, io mem 0x7d008000 [ 2.948988] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.10 [ 2.959256] hub 1-0:1.0: USB hub found [ 2.963260] hub 1-0:1.0: 1 port detected [ 2.974195] input: gpio-keys as /devices/soc0/gpio-keys/input/input0 [ 2.986953] palmas-rtc 7000d000.i2c:tps65913@58:rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800) [ 3.041470] dvdd_ts: disabling [ 3.044722] usb1_vbus: disabling [ 3.047983] vdd_cam_1v8_reg: disabling [ 3.055296] Waiting for root device /dev/mmcblk0p1... [ 3.273988] usb 1-1: new high-speed USB device number 2 using tegra-ehci [ 4.252415] asix 1-1:1.0 eth0: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 48:f8:b3:2b:29:1f [ 67.654461] random: nonblocking pool is initialized

[PYBOOT] [dalmore 01:52]: Timed out waiting for "<type 'str'>":

[PYBOOT] [dalmore 01:53]: got exception: timeout ~$off

[PYBOOT] [dalmore 01:55]: Done. Board dalmore-arm-multi_v7_defconfig failure log: -------------------------------------------------

[ 2.484466] Key type dns_resolver registered [ 2.490865] ThumbEE CPU extension supported. [ 2.495287] Registering SWP/SWPB emulation handler [ 2.544750] vdd-sys-5v0: supplied by vdd_ac_bat [ 2.551072] VDD_5V0_HDMI_CON: supplied by vdd-sys-5v0 [ 2.558756] vdd_hdmi_5v0: supplied by vdd-sys-5v0 [ 2.574894] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 2.581650] [drm] No driver support for vblank timestamp query. [ 2.598564] mmc1: new high speed MMC card at address 0001 [ 2.608832] mmcblk1: mmc1:0001 SEM32G 29.1 GiB [ 2.615941] mmcblk1boot0: mmc1:0001 SEM32G partition 1 4.00 MiB [ 2.622943] mmcblk1boot1: mmc1:0001 SEM32G partition 2 4.00 MiB [ 2.631434] mmcblk1rpmb: mmc1:0001 SEM32G partition 3 4.00 MiB [ 2.642436] mmcblk1: p1 [ 2.761605] Console: switching to colour frame buffer device 240x75 [ 2.848587] drm drm: fb0: frame buffer device [ 2.868968] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 2.879091] usb2_vbus: supplied by vdd-sys-5v0 [ 2.889832] tegra-ehci 7d008000.usb: EHCI Host Controller [ 2.895423] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 1 [ 2.904361] tegra-ehci 7d008000.usb: irq 339, io mem 0x7d008000 [ 2.919000] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.10 [ 2.929344] hub 1-0:1.0: USB hub found [ 2.933413] hub 1-0:1.0: 1 port detected [ 2.944292] input: gpio-keys as /devices/soc0/gpio-keys/input/input0 [ 2.958300] palmas-rtc 7000d000.i2c:tps65913@58:rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800) [ 3.020091] dvdd_ts: disabling [ 3.023192] usb1_vbus: disabling [ 3.026568] vdd_cam_1v8_reg: disabling [ 3.034243] Waiting for root device /dev/mmcblk0p1... [ 3.244003] usb 1-1: new high-speed USB device number 2 using tegra-ehci [ 4.197278] asix 1-1:1.0 eth0: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 48:f8:b3:2b:29:1f [ 64.726869] random: nonblocking pool is initialized

[PYBOOT] [dalmore 01:57]: Timed out waiting for "<type 'str'>":

[PYBOOT] [dalmore 01:58]: got exception: timeout ~$off

[PYBOOT] [dalmore 01:59]: Done. Board dalmore-arm-multi_v7_nosmp_defconfig failure log: -------------------------------------------------

[ 2.036334] can: broadcast manager protocol (rev 20120528 t) [ 2.042086] can: netlink gateway (rev 20130117) max_hops=1 [ 2.048734] Key type dns_resolver registered [ 2.053868] ThumbEE CPU extension supported. [ 2.085672] vdd-sys-5v0: supplied by vdd_ac_bat [ 2.090611] VDD_5V0_HDMI_CON: supplied by vdd-sys-5v0 [ 2.100719] vdd_hdmi_5v0: supplied by vdd-sys-5v0 [ 2.123904] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 2.130589] [drm] No driver support for vblank timestamp query. [ 2.295660] Console: switching to colour frame buffer device 240x75 [ 2.382537] drm drm: fb0: frame buffer device [ 2.387269] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 2.395309] usb2_vbus: supplied by vdd-sys-5v0 [ 2.402836] tegra-ehci 7d008000.usb: EHCI Host Controller [ 2.408392] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 1 [ 2.416281] mmc1: new high speed MMC card at address 0001 [ 2.422941] mmcblk1: mmc1:0001 SEM32G 29.1 GiB [ 2.427974] mmcblk1boot0: mmc1:0001 SEM32G partition 1 4.00 MiB [ 2.434751] tegra-ehci 7d008000.usb: irq 339, io mem 0x7d008000 [ 2.440827] mmcblk1boot1: mmc1:0001 SEM32G partition 2 4.00 MiB [ 2.447218] mmcblk1rpmb: mmc1:0001 SEM32G partition 3 4.00 MiB [ 2.453994] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.10 [ 2.462189] mmcblk1: p1 [ 2.466097] hub 1-0:1.0: USB hub found [ 2.473061] hub 1-0:1.0: 1 port detected [ 2.482704] input: gpio-keys as /devices/soc0/gpio-keys/input/input0 [ 2.494035] palmas-rtc 7000d000.i2c:tps65913@58:rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800) [ 2.528494] dvdd_ts: disabling [ 2.531681] usb1_vbus: disabling [ 2.534965] vdd_cam_1v8_reg: disabling [ 2.540412] Waiting for root device /dev/mmcblk0p1... [ 2.789564] usb 1-1: new high-speed USB device number 2 using tegra-ehci [ 3.741855] asix 1-1:1.0 eth0: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 48:f8:b3:2b:29:1f

[PYBOOT] [dalmore 01:53]: Timed out waiting for "<type 'str'>":

[PYBOOT] [dalmore 01:54]: got exception: timeout ~$off

[PYBOOT] [dalmore 01:55]: Done. Board dalmore-arm-tegra_defconfig failure log: -------------------------------------------------

[ 2.666431] Bluetooth: RFCOMM ver 1.11 [ 2.670381] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 2.675775] Bluetooth: BNEP socket layer initialized [ 2.680869] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 2.686867] Bluetooth: HIDP socket layer initialized [ 2.693888] Key type dns_resolver registered [ 2.703530] Registering SWP/SWPB emulation handler [ 2.735075] vdd-sys-5v0: supplied by vdd_ac_bat [ 2.742353] VDD_5V0_HDMI_CON: supplied by vdd-sys-5v0 [ 2.752440] vdd_hdmi_5v0: supplied by vdd-sys-5v0 [ 2.777183] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 2.783983] [drm] No driver support for vblank timestamp query. [ 2.961592] Console: switching to colour frame buffer device 240x75 [ 3.048937] drm drm: fb0: frame buffer device [ 3.099335] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 3.106549] usb2_vbus: supplied by vdd-sys-5v0 [ 3.116122] tegra-ehci 7d008000.usb: EHCI Host Controller [ 3.121923] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 1 [ 3.131108] tegra-ehci 7d008000.usb: irq 339, io mem 0x7d008000 [ 3.149345] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.10 [ 3.163391] hub 1-0:1.0: USB hub found [ 3.167401] hub 1-0:1.0: 1 port detected [ 3.181580] input: gpio-keys as /devices/soc0/gpio-keys/input/input1 [ 3.195847] palmas-rtc 7000d000.i2c:tps65913@58:rtc: setting system clock to 2000-01-01 00:00:01 UTC (946684801) [ 3.283095] dvdd_ts: disabling [ 3.286201] usb1_vbus: disabling [ 3.289583] vdd_cam_1v8_reg: disabling [ 3.294254] ALSA device list: [ 3.297294] #0: NVIDIA Tegra Dalmore [ 3.303128] Waiting for root device /dev/mmcblk0p1... [ 3.489342] usb 1-1: new high-speed USB device number 2 using tegra-ehci [ 4.523963] asix 1-1:1.0 eth0: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 48:f8:b3:2b:29:1f [ 63.659299] random: nonblocking pool is initialized

[PYBOOT] [dalmore 01:45]: Timed out waiting for "<type 'str'>":

[PYBOOT] [dalmore 01:46]: got exception: timeout ~$off

[PYBOOT] [dalmore 01:47]: Done. Board odroidu3-arm-exynos_defconfig failure log: -------------------------------------------------

[ 1.628827] dwmmc_exynos 12550000.mmc: DW MMC controller at irq 107,32 bit host data width,128 deep fifo [ 1.638516] dwmmc_exynos 12550000.mmc: allocated mmc-pwrseq [ 1.643822] usb 1-3: new high-speed USB device number 2 using exynos-ehci [ 1.677414] dwmmc_exynos 12550000.mmc: 1 slots initialized [ 1.678600] usbcore: registered new interface driver usbhid [ 1.683836] usbhid: USB HID core driver [ 1.692606] NET: Registered protocol family 10 [ 1.693236] sit: IPv6 over IPv4 tunneling driver [ 1.696450] NET: Registered protocol family 17 [ 1.700476] NET: Registered protocol family 15 [ 1.704940] Key type dns_resolver registered [ 1.709259] Registering SWP/SWPB emulation handler [ 1.718109] s3c-rtc 10070000.rtc: rtc disabled, re-enabling [ 1.719630] s3c-rtc 10070000.rtc: rtc core: registered s3c as rtc1 [ 1.746105] mmc_host mmc1: Bus speed (slot 0) = 44000000Hz (slot req 52000000Hz, actual 44000000HZ div = 0) [ 1.750368] mmc_host mmc1: Bus speed (slot 0) = 73333333Hz (slot req 52000000Hz, actual 36666666HZ div = 1) [ 1.760212] max98090 1-0010: MAX98090 REVID=0x43 [ 1.764532] mmc1: new DDR MMC card at address 0001 [ 1.769641] mmcblk1: mmc1:0001 008G92 7.28 GiB [ 1.773939] mmcblk1boot0: mmc1:0001 008G92 partition 1 4.00 MiB [ 1.780053] mmcblk1boot1: mmc1:0001 008G92 partition 2 4.00 MiB [ 1.785925] mmcblk1rpmb: mmc1:0001 008G92 partition 3 512 KiB [ 1.791918] max98090 1-0010: use default 2.8v micbias [ 1.797399] mmcblk1: p1 p2 [ 1.804279] asoc-simple-card sound: HiFi <-> 3830000.i2s mapping ok [ 1.813088] input: gpio_keys as /devices/platform/gpio_keys/input/input0 [ 1.847419] max77686-rtc max77686-rtc: setting system clock to 2000-01-01 01:00:20 UTC (946688420) [ 1.865515] VDD10_HDMI_1.0V: disabling [ 1.866198] vdd_g3d: disabling [ 1.867271] BUCK8_2.8V: disabling [ 1.871245] ALSA device list: [ 1.872920] #0: Odroid-U3 [ 1.876533] Waiting for root device /dev/mmcblk0p2...

[PYBOOT] [odroidu3 01:52]: Timed out waiting for "<type 'str'>":

[PYBOOT] [odroidu3 01:53]: got exception: timeout ~$off

[PYBOOT] [odroidu3 01:54]: Done. Board omap5uevm-arm-multi_lpae_defconfig failure log: -------------------------------------------------

[ 2.049463] Code: bad PC value [ 2.049468] ---[ end trace 035c043b8b634e0c ]--- [ 2.049472] Kernel panic - not syncing: Attempted to kill the idle task! [ 2.058007] CPU1: stopping [ 2.058010] CPU: 1 PID: 6 Comm: kworker/u4:0 Tainted: G D 4.6.0-rc7 #1 [ 2.058012] Hardware name: Generic OMAP5 (Flattened Device Tree) [ 2.058021] Workqueue: deferwq deferred_probe_work_func [ 2.058031] [<c031031c>] (unwind_backtrace) from [<c030b968>] (show_stack+0x10/0x14) [ 2.058039] [<c030b968>] (show_stack) from [<c058b954>] (dump_stack+0x88/0x9c) [ 2.058046] [<c058b954>] (dump_stack) from [<c030eac4>] (handle_IPI+0x16c/0x18c) [ 2.058051] [<c030eac4>] (handle_IPI) from [<c03017d4>] (gic_handle_irq+0x90/0x94) [ 2.058055] [<c03017d4>] (gic_handle_irq) from [<c030c494>] (__irq_svc+0x54/0x70) [ 2.058057] Exception stack(0xee087cc8 to 0xee087d10) [ 2.058061] 7cc0: 00000000 0000000d 00000001 60000013 000000e6 00000000 [ 2.058065] 7ce0: 00000004 00000061 c14339b0 00000006 00000000 000000e5 00000000 ee087d18 [ 2.058068] 7d00: c06dd3c8 c03827b0 60000013 ffffffff [ 2.058073] [<c030c494>] (__irq_svc) from [<c03827b0>] (console_unlock+0x3d4/0x5bc) [ 2.058077] [<c03827b0>] (console_unlock) from [<c0382be4>] (vprintk_emit+0x24c/0x478) [ 2.058081] [<c0382be4>] (vprintk_emit) from [<c0382f38>] (vprintk_default+0x20/0x28) [ 2.058089] [<c0382f38>] (vprintk_default) from [<c03c7cec>] (printk+0x30/0x40) [ 2.058096] [<c03c7cec>] (printk) from [<c099620c>] (cpufreq_online+0x664/0x6d8) [ 2.058103] [<c099620c>] (cpufreq_online) from [<c07797fc>] (subsys_interface_register+0x90/0xcc) [ 2.058109] [<c07797fc>] (subsys_interface_register) from [<c0994b58>] (cpufreq_register_driver+0x150/0x1a0) [ 2.058115] [<c0994b58>] (cpufreq_register_driver) from [<c09986b0>] (dt_cpufreq_probe+0x70/0xe8) [ 2.058120] [<c09986b0>] (dt_cpufreq_probe) from [<c077c898>] (platform_drv_probe+0x50/0xb0) [ 2.058126] [<c077c898>] (platform_drv_probe) from [<c077b0b4>] (driver_probe_device+0x208/0x2b4) [ 2.058132] [<c077b0b4>] (driver_probe_device) from [<c07794d4>] (bus_for_each_drv+0x60/0x94) [ 2.058138] [<c07794d4>] (bus_for_each_drv) from [<c077adcc>] (__device_attach+0xb0/0x114) [ 2.058143] [<c077adcc>] (__device_attach) from [<c077a2b0>] (bus_probe_device+0x84/0x8c) [ 2.058149] [<c077a2b0>] (bus_probe_device) from [<c077a73c>] (deferred_probe_work_func+0x68/0x94) [ 2.058155] [<c077a73c>] (deferred_probe_work_func) from [<c0356718>] (process_one_work+0x1ec/0x410) [ 2.058161] [<c0356718>] (process_one_work) from [<c0357384>] (worker_thread+0x38/0x594) [ 2.058167] [<c0357384>] (worker_thread) from [<c035c140>] (kthread+0xdc/0xf4) [ 2.058173] [<c035c140>] (kthread) from [<c0307d38>] (ret_from_fork+0x14/0x3c) [ 2.476547] ---[ end Kernel panic - not syncing: Attempted to kill the idle task!

[PYBOOT] [omap5uevm 00:48]: got exception: panic ~$off

[PYBOOT] [omap5uevm 00:49]: Done. Board omap5uevm-arm-multi_v7_defconfig failure log: -------------------------------------------------

[ 1.754628] usbcore: registered new interface driver usbhid [ 1.760462] usbhid: USB HID core driver [ 1.768992] NET: Registered protocol family 10 [ 1.773934] usb 1-3: new high-speed USB device number 2 using ehci-omap [ 1.781085] sit: IPv6 over IPv4 tunneling driver [ 1.786350] NET: Registered protocol family 17 [ 1.791021] can: controller area network core (rev 20120528 abi 9) [ 1.797526] NET: Registered protocol family 29 [ 1.802183] can: raw protocol (rev 20120528) [ 1.806665] can: broadcast manager protocol (rev 20120528 t) [ 1.812596] can: netlink gateway (rev 20130117) max_hops=1 [ 1.818630] Key type dns_resolver registered [ 1.823183] omap_vc_init_channel: No PMIC info for vdd_core [ 1.829018] omap_vp_init: No PMIC info for vdd_core [ 1.834123] omap_vc_init_channel: No PMIC info for vdd_mm [ 1.839770] omap_vp_init: No PMIC info for vdd_mm [ 1.844689] omap_vc_init_channel: No PMIC info for vdd_mpu [ 1.850429] omap_vp_init: No PMIC info for vdd_mpu [ 1.855956] Power Management for TI OMAP4+ devices. [ 1.861187] ThumbEE CPU extension supported. [ 1.865683] Registering SWP/SWPB emulation handler [ 1.872802] palmas 0-0048: Irq flag is 0x00000000 [ 1.899384] palmas 0-0048: Muxing GPIO 2, PWM 0, LED 0 [ 1.910144] palmas-rtc 48070000.i2c:palmas@48:rtc: rtc core: registered 48070000.i2c:palmas as rtc0 [ 1.934058] mmc0: new high speed MMC card at address 0001 [ 1.940057] mmcblk0: mmc0:0001 SEM04G 3.69 GiB [ 1.944949] mmcblk0boot0: mmc0:0001 SEM04G partition 1 2.00 MiB [ 1.951307] mmcblk0boot1: mmc0:0001 SEM04G partition 2 2.00 MiB [ 1.973072] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 1.997552] omap_i2c 4807c000.i2c: bus 4 rev0.12 at 400 kHz [ 2.003566] smsc95xx v1.0.4 [ 2.038757] cpufreq: cpufreq_online: CPU0: Running at unlisted freq: 1100000 KHz [ 2.046687] cpufreq: cpufreq_online: CPU0: Unlisted initial frequency changed to: 1500000 KHz

[PYBOOT] [omap5uevm 02:07]: Timed out waiting for "<type 'str'>":

[PYBOOT] [omap5uevm 02:08]: got exception: timeout ~$off

[PYBOOT] [omap5uevm 02:09]: Done. Board omap5uevm-arm-multi_v7_nosmp_defconfig failure log: -------------------------------------------------

[ 49.784796] [<c0349af4>] (wq_worker_sleeping) from [<c0a8f5d8>] (__schedule+0x31c/0x470) [ 49.793269] [<c0a8f5d8>] (__schedule) from [<c0a8f770>] (schedule+0x44/0x9c) [ 49.800651] [<c0a8f770>] (schedule) from [<c0337680>] (do_exit+0x7b4/0x908) [ 49.807946] [<c0337680>] (do_exit) from [<c030b5c4>] (die+0x328/0x394) [ 49.814785] [<c030b5c4>] (die) from [<c031a290>] (__do_kernel_fault.part.0+0x64/0x1e4) [ 49.823078] [<c031a290>] (__do_kernel_fault.part.0) from [<c0315580>] (do_page_fault+0x370/0x384) [ 49.832365] [<c0315580>] (do_page_fault) from [<c030125c>] (do_DataAbort+0x3c/0xb8) [ 49.840378] [<c030125c>] (do_DataAbort) from [<c030bc60>] (__dabt_svc+0x40/0x60) [ 49.848122] Exception stack(0xee4fad08 to 0xee4fad50) [ 49.853413] ad00: ee482200 00000000 ffffffff 00000000 ee482200 00000000 [ 49.861978] ad20: c1035a08 00000000 ee48242c c0a8f770 c034de82 ee4fad9c ee483338 ee4fad58 [ 49.870546] ad40: c0349af4 c034de80 20000193 ffffffff [ 49.875834] [<c030bc60>] (__dabt_svc) from [<c034de80>] (kthread_data+0x4/0xc) [ 49.883395] [<c034de80>] (kthread_data) from [<c0349af4>] (wq_worker_sleeping+0x8/0xb8) [ 49.891775] [<c0349af4>] (wq_worker_sleeping) from [<c0a8f5d8>] (__schedule+0x31c/0x470) [ 49.900245] [<c0a8f5d8>] (__schedule) from [<c0a8f770>] (schedule+0x44/0x9c) [ 49.907627] [<c0a8f770>] (schedule) from [<c0337680>] (do_exit+0x7b4/0x908) [ 49.914920] [<c0337680>] (do_exit) from [<c030b5c4>] (die+0x328/0x394) [ 49.921759] [<c030b5c4>] (die) from [<c031a290>] (__do_kernel_fault.part.0+0x64/0x1e4) [ 49.930048] [<c031a290>] (__do_kernel_fault.part.0) from [<c0315580>] (do_page_fault+0x370/0x384) [ 49.939338] [<c0315580>] (do_page_fault) from [<c030125c>] (do_DataAbort+0x3c/0xb8) [ 49.947350] [<c030125c>] (do_DataAbort) from [<c030bc60>] (__dabt_svc+0x40/0x60) [ 49.955092] Exception stack(0xee4faf38 to 0xee4faf80) [ 49.960372] af20: ee482200 00000000 [ 49.968934] af40: ffffffff 00000000 ee482200 00000000 c1035a08 00000000 ee48242c c0a8f770 [ 49.977494] af60: c034de82 ee4fafcc ee483338 ee4faf88 c0349af4 c034de80 20000193 ffffffff [ 49.986055] [<c030bc60>] (__dabt_svc) from [<c034de80>] (kthread_data+0x4/0xc) [ 49.993623] [<c034de80>] (kthread_data) from [<c0349af4>] (wq_worker_sleeping+0x8/0xb8) [ 50.002011] [<c0349af4>] (wq_worker_sleeping) from [<c0a8f5d8>] (__schedule+0x31c/0x470) [ 50.010480] [<c0a8f5d8>] (__schedule) from [<c0a8f770>] (schedule+0x44/0x9c) [ 50.017859] [<c0a8f770>] (schedule) from [<c0337680>] (do_exit+0x7b4/0x908) [ 50.025146] [<c0337680>] (do_exit) from [<c030b5c4>] (die+0x328/0x394) [ 50.031980] [<c030b5c4>] (die) from [<c031a290>] (__do_kernel_fault.part.0+0x64/0x1e4) [ 50.040268] [<c031a290>] (__do_kernel_fault.part.0) from [<c0315580>] (do_page_fault+0x370/0x384) [ 50.049562] [<c0315580>] (do_page_fault) from [<c030125c>] (do_DataAbort+0x3c/0xb8) [ 50.057576] [PYBOOT] [omap5uevm 01:42]: got exception: panic ~$off

[PYBOOT] [omap5uevm 01:43]: Done. Board seaboard-arm-multi_v7_defconfig failure log: -------------------------------------------------

[ 1.652280] vdd_ldo7,avdd_hdmi,vdd_fuse: supplied by vdd_sm2,vin_ldo* [ 1.662841] utmi_phy_clk_enable: timeout waiting for phy to stabilize [ 1.669319] tegra-ehci c5000000.usb: EHCI Host Controller [ 1.674737] tegra-ehci c5000000.usb: new USB bus registered, assigned bus number 3 [ 1.683177] tegra-ehci c5000000.usb: irq 287, io mem 0xc5000000 [ 1.694025] mmc2: switch to bus width 8 failed [ 1.698650] tegra-ehci c5000000.usb: USB 2.0 started, EHCI 1.00 [ 1.704674] mmc2: switch to bus width 4 failed [ 1.709181] mmc2: new high speed MMC card at address 0001 [ 1.716835] mmcblk2: mmc2:0001 MMC08G 7.46 GiB [ 1.721912] hub 3-0:1.0: USB hub found [ 1.725800] hub 3-0:1.0: 1 port detected [ 1.725937] mmcblk2boot0: mmc2:0001 MMC08G partition 1 512 KiB [ 1.726301] mmcblk2boot1: mmc2:0001 MMC08G partition 2 512 KiB [ 1.736444] mmcblk2: p3 [ 1.748996] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 1.755631] [drm] No driver support for vblank timestamp query. [ 1.793532] mmc0: queuing unknown CIS tuple 0x80 (50 bytes) [ 1.801516] mmc0: queuing unknown CIS tuple 0x80 (7 bytes) [ 1.804397] mmc0: queuing unknown CIS tuple 0x80 (7 bytes) [ 1.811750] mmc0: queuing unknown CIS tuple 0x80 (19 bytes) [ 1.835092] Console: switching to colour frame buffer device 170x48 [ 1.880544] drm drm: fb0: frame buffer device [ 1.895912] mmc0: queuing unknown CIS tuple 0x02 (1 bytes) [ 1.903682] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 1.910560] input: gpio-keys as /devices/soc0/gpio-keys/input/input2 [ 1.917674] tps6586x-rtc tps6586x-rtc: setting system clock to 2009-01-01 00:00:00 UTC (1230768000) [ 1.931828] vdd_1v5: disabling [ 1.934916] vdd_1v2: disabling [ 1.941127] mmc0: new SDIO card at address 0001 [ 2.563235] asix 2-1:1.0 eth0: register 'asix' at usb-c5008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, c0:c1:c0:13:08:60 [ 2.574661] Waiting for root device /dev/mmcblk0p3... [ 58.654173] random: nonblocking pool is initialized

[PYBOOT] [seaboard 01:47]: Timed out waiting for "<type 'str'>":

[PYBOOT] [seaboard 01:48]: got exception: timeout ~$off

[PYBOOT] [seaboard 01:49]: Done. Board seaboard-arm-multi_v7_nosmp_defconfig failure log: -------------------------------------------------

[ 1.606987] vdd_ldo8,avdd_hdmi_pll: supplied by vdd_sm2,vin_ldo* [ 1.613324] vdd_ldo7,avdd_hdmi,vdd_fuse: supplied by vdd_sm2,vin_ldo* [ 1.623239] utmi_phy_clk_enable: timeout waiting for phy to stabilize [ 1.629687] tegra-ehci c5000000.usb: EHCI Host Controller [ 1.635099] tegra-ehci c5000000.usb: new USB bus registered, assigned bus number 3 [ 1.642855] tegra-ehci c5000000.usb: irq 287, io mem 0xc5000000 [ 1.658197] tegra-ehci c5000000.usb: USB 2.0 started, EHCI 1.00 [ 1.664692] hub 3-0:1.0: USB hub found [ 1.668532] hub 3-0:1.0: 1 port detected [ 1.673452] mmc2: switch to bus width 8 failed [ 1.681737] mmc2: switch to bus width 4 failed [ 1.686208] mmc2: new high speed MMC card at address 0001 [ 1.691969] mmcblk2: mmc2:0001 MMC08G 7.46 GiB [ 1.696708] mmcblk2boot0: mmc2:0001 MMC08G partition 1 512 KiB [ 1.702718] mmcblk2boot1: mmc2:0001 MMC08G partition 2 512 KiB [ 1.709925] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 1.716544] [drm] No driver support for vblank timestamp query. [ 1.723786] mmcblk2: p3 [ 1.749562] mmc0: queuing unknown CIS tuple 0x80 (50 bytes) [ 1.757132] mmc0: queuing unknown CIS tuple 0x80 (7 bytes) [ 1.759861] mmc0: queuing unknown CIS tuple 0x80 (7 bytes) [ 1.766795] mmc0: queuing unknown CIS tuple 0x80 (19 bytes) [ 1.779281] Console: switching to colour frame buffer device 170x48 [ 1.819170] drm drm: fb0: frame buffer device [ 1.823642] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 1.830053] input: gpio-keys as /devices/soc0/gpio-keys/input/input2 [ 1.836923] tps6586x-rtc tps6586x-rtc: setting system clock to 2009-01-01 00:00:00 UTC (1230768000) [ 1.848666] vdd_1v5: disabling [ 1.851730] vdd_1v2: disabling [ 1.869120] mmc0: queuing unknown CIS tuple 0x02 (1 bytes) [ 1.877622] mmc0: new SDIO card at address 0001 [ 2.552390] asix 2-1:1.0 eth0: register 'asix' at usb-c5008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, c0:c1:c0:13:08:60 [ 2.563242] Waiting for root device /dev/mmcblk0p3...

[PYBOOT] [seaboard 02:02]: Timed out waiting for "<type 'str'>":

[PYBOOT] [seaboard 02:03]: got exception: timeout ~$off

[PYBOOT] [seaboard 02:04]: Done. Board seaboard-arm-tegra_defconfig failure log: -------------------------------------------------

[ 1.669850] Bluetooth: RFCOMM ver 1.11 [ 1.673658] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 1.678990] Bluetooth: BNEP socket layer initialized [ 1.683976] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 1.689911] Bluetooth: HIDP socket layer initialized [ 1.695486] Key type dns_resolver registered [ 1.700977] Registering SWP/SWPB emulation handler [ 1.716693] tegra-dc 54200000.dc: failed to probe RGB output: -517 [ 1.723480] VDDIO_HDMI: supplied by vdd_5v0 [ 1.727935] vdd_sys: supplied by vdd_5v0 [ 1.732023] vdd_sm2,vin_ldo*: supplied by vdd_sys [ 1.736974] vdd_ldo8,avdd_hdmi_pll: supplied by vdd_sm2,vin_ldo* [ 1.743598] vdd_ldo7,avdd_hdmi,vdd_fuse: supplied by vdd_sm2,vin_ldo* [ 1.754052] utmi_phy_clk_enable: timeout waiting for phy to stabilize [ 1.760504] tegra-ehci c5000000.usb: EHCI Host Controller [ 1.765963] tegra-ehci c5000000.usb: new USB bus registered, assigned bus number 3 [ 1.773943] tegra-ehci c5000000.usb: irq 287, io mem 0xc5000000 [ 1.791388] tegra-ehci c5000000.usb: USB 2.0 started, EHCI 1.00 [ 1.799770] hub 3-0:1.0: USB hub found [ 1.803666] hub 3-0:1.0: 1 port detected [ 1.815197] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 1.821818] [drm] No driver support for vblank timestamp query. [ 1.902709] Console: switching to colour frame buffer device 170x48 [ 1.922495] drm drm: fb0: frame buffer device [ 1.951376] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 1.958658] input: gpio-keys as /devices/soc0/gpio-keys/input/input4 [ 1.966713] tps6586x-rtc tps6586x-rtc: setting system clock to 2009-01-01 00:00:00 UTC (1230768000) [ 1.986622] vdd_1v5: disabling [ 1.989674] vdd_1v2: disabling [ 1.992884] ALSA device list: [ 1.995853] #0: NVIDIA Tegra Seaboard [ 2.329277] asix 2-1:1.0 eth0: register 'asix' at usb-c5008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, c0:c1:c0:13:08:60 [ 2.340382] Waiting for root device /dev/mmcblk0p3...

[PYBOOT] [seaboard 01:46]: Timed out waiting for "<type 'str'>":

[PYBOOT] [seaboard 01:47]: got exception: timeout ~$off

[PYBOOT] [seaboard 01:49]: Done. Board snow-arm-multi_v7_nosmp_defconfig failure log: -------------------------------------------------

[....] Waiting for /dev to be fully populated...[?25l[?1c7[ ok 8[?25h[?0cdone. [....] Activating swap...[?25l[?1c7[ ok 8[?25h[?0cdone. [ 3.185948] EXT4-fs (mmcblk0p3): warning: mounting fs with errors, running e2fsck is recommended [ 3.194297] EXT4-fs (mmcblk0p3): re-mounted. Opts: (null) [....] Cleaning up temporary files... /tmp[?25l[?1c7[ ok 8[?25h[?0c. [....] Activating lvm and md swap...[?25l[?1c7[ ok 8[?25h[?0cdone. [....] Checking file systems...fsck from util-linux 2.20.1 [?25l[?1c7[ ok 8[?25h[?0cdone. [....] Mounting local filesystems...[?25l[?1c7[ ok 8[?25h[?0cdone. [....] Activating swapfile swap...[?25l[?1c7[ ok 8[?25h[?0cdone. [....] Cleaning up temporary files...[?25l[?1c7[ ok 8[?25h[?0c. [....] Setting kernel variables ...[?25l[?1c7[ ok 8[?25h[?0cdone. [ 4.234721] random: dd urandom read with 58 bits of entropy available [....] Configuring network interfaces...Internet Systems Consortium DHCP Client 4.2.2 Copyright 2004-2011 Internet Systems Consortium. All rights reserved. For info, please visit https://www.isc.org/software/dhcp/

Cannot find device "eth0" Bind socket to interface: No such device Failed to bring up eth0. [?25l[?1c7[ ok 8[?25h[?0cdone. [....] Cleaning up temporary files...[?25l[?1c7[ ok 8[?25h[?0c. INIT: Entering runlevel: 2 [info] Using makefile-style concurrent boot in runlevel 2. [....] Starting enhanced syslogd: rsyslogd[?25l[?1c7[ ok 8[?25h[?0c. [....] Starting web server: apache2apache2: Could not reliably determine the server's fully qualified domain name, using 127.0.0.1 for ServerName [?25l[?1c7[ ok 8[?25h[?0c. [....] Starting periodic command scheduler: cron[?25l[?1c7[ ok 8[?25h[?0c. [....] Loading cpufreq kernel modules...[?25l[?1c7[ ok 8[?25h[?0cdone (none). [....] Starting system message bus: dbus[?25l[?1c7[ ok 8[?25h[?0c. [....] CPUFreq Utilities: Setting ondemand CPUFreq governor...CPU0...[?25l[?1c7[ ok 8[?25h[?0cdone. [....] Starting OpenBSD Secure Shell server: sshd[?25l[?1c7[ ok 8[?25h[?0c.

[PYBOOT] [snow 03:10]: Timed out waiting for "<type 'str'>":

[PYBOOT] [snow 03:11]: got exception: timeout ~$off

[PYBOOT] [snow 03:12]: Done. Board snowball-arm-multi_v7_defconfig failure log: -------------------------------------------------

[ 1.991363] can: controller area network core (rev 20120528 abi 9) [ 1.997619] NET: Registered protocol family 29 [ 2.002105] can: raw protocol (rev 20120528) [ 2.006378] can: broadcast manager protocol (rev 20120528 t) [ 2.012054] can: netlink gateway (rev 20130117) max_hops=1 [ 2.018096] Key type dns_resolver registered [ 2.020324] mmc3: new high speed MMC card at address 0001 [ 2.020812] mmcblk3: mmc3:0001 3.53 GiB [ 2.021026] mmcblk3boot0: mmc3:0001 partition 1 2.00 MiB [ 2.021179] mmcblk3boot1: mmc3:0001 partition 2 2.00 MiB [ 2.021362] mmcblk3rpmb: mmc3:0001 partition 3 128 KiB [ 2.023406] mmcblk3: p1 p2 p3 p4 [ 2.051391] ThumbEE CPU extension supported. [ 2.055694] Registering SWP/SWPB emulation handler [ 2.067535] input: gpio_keys as /devices/soc0/gpio_keys/input/input0 [ 2.075500] rtc-pl031 80154000.rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800) [ 2.084777] thermal cooling_device0: thermal-cpufreq-0 bind to 0: 0-succeed [ 2.091796] thermal cooling_device0: thermal-cpufreq-0 bind to 1: 0-succeed [ 2.098785] thermal cooling_device0: thermal-cpufreq-0 bind to 2: 0-succeed [ 2.105773] db8500-cpufreq-cooling soc:cpufreq-cooling: Cooling device registered: thermal-cpufreq-0 [ 2.119079] db8500-esram12: disabling [ 2.122802] db8500-esram34: disabling [ 2.126800] V-CSI/DSI: disabling [ 2.130096] mmci-reg: disabling [ 2.133758] uart-pl011 80007000.uart: DMA channel TX dma0chan20 [ 2.139739] uart-pl011 80007000.uart: DMA channel RX dma0chan21 [ 2.146026] Waiting for root device /dev/mmcblk0p4... cu: Got hangup signal Connected. cu: waitpid: No child processes Connected.

Disconnected.

[PYBOOT] [snowball 02:05]: Timed out waiting for "<type 'str'>":

[PYBOOT] [snowball 02:06]: got exception: timeout ~$off

[PYBOOT] [snowball 02:07]: Done. Board snowball-arm-multi_v7_nosmp_defconfig failure log: -------------------------------------------------

[ 1.857177] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.864715] ledtrig-cpu: registered to indicate activity on CPUs [ 1.870971] usbcore: registered new interface driver usbhid [ 1.876525] usbhid: USB HID core driver [ 1.883819] NET: Registered protocol family 10 [ 1.889312] sit: IPv6 over IPv4 tunneling driver [ 1.894500] NET: Registered protocol family 17 [ 1.898956] can: controller area network core (rev 20120528 abi 9) [ 1.905181] NET: Registered protocol family 29 [ 1.909637] can: raw protocol (rev 20120528) [ 1.913909] can: broadcast manager protocol (rev 20120528 t) [ 1.919586] can: netlink gateway (rev 20130117) max_hops=1 [ 1.925506] Key type dns_resolver registered [ 1.929962] ThumbEE CPU extension supported. [ 1.942626] input: gpio_keys as /devices/soc0/gpio_keys/input/input0 [ 1.949340] rtc-pl031 80154000.rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800) [ 1.958435] thermal cooling_device0: thermal-cpufreq-0 bind to 0: 0-succeed [ 1.965454] thermal cooling_device0: thermal-cpufreq-0 bind to 1: 0-succeed [ 1.972412] thermal cooling_device0: thermal-cpufreq-0 bind to 2: 0-succeed [ 1.979400] db8500-cpufreq-cooling soc:cpufreq-cooling: Cooling device registered: thermal-cpufreq-0 [ 1.991271] db8500-esram12: disabling [ 1.995056] db8500-esram34: disabling [ 1.998992] V-CSI/DSI: disabling [ 2.002258] mmci-reg: disabling [ 2.005950] uart-pl011 80007000.uart: DMA channel TX dma0chan20 [ 2.011932] uart-pl011 80007000.uart: DMA channel RX dma0chan21 [ 2.019134] Waiting for root device /dev/mmcblk0p4... [ 2.055114] mmc3: new high speed MMC card at address 0001 [ 2.060913] mmcblk3: mmc3:0001 3.53 GiB [ 2.065093] mmcblk3boot0: mmc3:0001 partition 1 2.00 MiB [ 2.070678] mmcblk3boot1: mmc3:0001 partition 2 2.00 MiB [ 2.076202] mmcblk3rpmb: mmc3:0001 partition 3 128 KiB [ 2.082489] mmcblk3: p1 p2 p3 p4

[PYBOOT] [snowball 02:01]: Timed out waiting for "<type 'str'>":

[PYBOOT] [snowball 02:02]: got exception: timeout ~$off

[PYBOOT] [snowball 02:03]: Done. Board snowball-arm-u8500_defconfig failure log: -------------------------------------------------

[ 2.603424] ux500-msp-i2s ux500-msp-i2s.1: Failed to get DMA channel capabilities, falling back to period counting: -6 [ 2.614227] snd-soc-mop500 snd-soc-mop500.0: ab8500-codec-dai.0 <-> ux500-msp-i2s.1 mapping ok [ 2.624176] ux500-msp-i2s ux500-msp-i2s.3: Failed to get DMA channel capabilities, falling back to period counting: -6 [ 2.634918] snd-soc-mop500 snd-soc-mop500.0: ab8500-codec-dai.1 <-> ux500-msp-i2s.3 mapping ok [ 2.659149] NET: Registered protocol family 10 [ 2.664581] sit: IPv6 over IPv4 tunneling driver [ 2.670104] NET: Registered protocol family 17 [ 2.674621] NET: Registered protocol family 35 [ 2.679138] NET: Registered protocol family 37 [ 2.683715] Registering SWP/SWPB emulation handler [ 2.700317] coresight-etm3x 801ae000.ptm: PTM 1.0 initialized [ 2.707122] coresight-etm3x 801af000.ptm: PTM 1.0 initialized [ 2.714416] input: gpio_keys as /devices/soc0/gpio_keys/input/input1 [ 2.727020] ab8500-rtc ab8500-rtc.0: setting system clock to 2000-04-19 19:00:05 UTC (956170805) [ 2.736236] thermal cooling_device0: thermal-cpufreq-0 bind to 0: 0-succeed [ 2.743316] thermal cooling_device0: thermal-cpufreq-0 bind to 1: 0-succeed [ 2.750366] thermal cooling_device0: thermal-cpufreq-0 bind to 2: 0-succeed [ 2.757354] db8500-cpufreq-cooling soc:cpufreq-cooling: Cooling device registered: thermal-cpufreq-0 [ 2.771026] db8500-esram12: disabling [ 2.774780] db8500-esram34: disabling [ 2.778656] V-CSI/DSI: disabling [ 2.781951] mmci-reg: disabling [ 2.785278] ALSA device list: [ 2.788238] #0: MOP500-card [ 2.791595] uart-pl011 80007000.uart: DMA channel TX dma0chan24 [ 2.797515] uart-pl011 80007000.uart: DMA channel RX dma0chan25 [ 2.803741] Waiting for root device /dev/mmcblk0p4... cu: Got hangup signal Connected. cu: waitpid: No child processes Connected.

Disconnected.

[PYBOOT] [snowball 01:52]: Timed out waiting for "<type 'str'>":

[PYBOOT] [snowball 01:53]: got exception: timeout ~$off

[PYBOOT] [snowball 01:54]: Done. Board wandboard-arm-imx_v6_v7_defconfig failure log: -------------------------------------------------

INIT: Id "4" respawning too fast: disab[ 19.940413] mmcblk0: error -110 sending status command, retrying led for 5 minutes INIT: Id "S1[ 19.949177] mmcblk0: error -110 sending status command, retrying " respawning too fast: disabled f[ 19.958024] mmcblk0: error -110 sending status command, aborting or 5 minutes [ 19.969536] mmcblk0: error -110 sending status command, retrying [ 19.978070] mmcblk0: error -110 sending status command, retrying [ 19.986554] mmcblk0: error -110 sending status command, aborting [ 19.997612] mmcblk0: error -110 sending status command, retrying [ 20.006063] mmcblk0: error -110 sending status command, retrying [ 20.014486] mmcblk0: error -110 sending status command, aborting [ 20.025520] mmcblk0: error -110 sending status command, retrying [ 20.033951] mmcblk0: error -110 sending status command, retrying [ 20.042406] mmcblk0: error -110 sending status command, aborting INIT: cannot execute "/sbin/getty" INIT: cannot execute "/sbin/getty" INIT: cannot execute "/sbin/getty" INIT: cannot execute "/sbin/getty"INIT: Id "3" respawning too fast: disabled for 5 minutes INIT: Id "2" respawning too fast: disabled for 5 minutes [ 20.091632] mmcblk0: error -110 sending status command, retrying [ 20.100128] mmcblk0: error -110 sending status command, retrying [ 20.108591] mmcblk0: error -110 sending status command, aborting [ 20.119644] mmcblk0: error -110 sending status command, retrying [ 20.128100] mmcblk0: error -110 sending status command, retrying [ 20.136522] mmcblk0: error -110 sending status command, aborting INIT: INIT: cannot execute "/sbin/getty"cannot execute "/sbin/getty"

INIT: Id "1" respawning too fast: disabled for 5 minutes INIT: Id "5" respawning too fast: disabled for 5 minutes INIT: no more processes left in this runlevel [ 51.385089] random: nonblocking pool is initialized

[PYBOOT] [wandboard 02:54]: Timed out waiting for "<type 'str'>":

[PYBOOT] [wandboard 02:55]: got exception: timeout ~$off

[PYBOOT] [wandboard 02:56]: Done.