Full logs are available at http://arm-soc.lixom.net/bootlogs/stable-rc/v4.4.30-35-gf821e08/
Failed boards:
arndale arm-multi_v7_nosmp_defconfig : FAILED 2:43.75 bbb arm-omap2plus_defconfig : FAILED 1:53.78 bbb arm-multi_v7_defconfig : FAILED 1:56.08 bbb arm-multi_v7_nosmp_defconfig : FAILED 2:21.52 beagleboard-x15 arm-omap2plus_defconfig : FAILED 1:44.24 beagleboard-x15 arm-multi_v7_defconfig : FAILED 1:43.46 beagleboard-x15 arm-multi_lpae_defconfig : FAILED 1:52.16 beagleboard-x15 arm-multi_v7_nosmp_defconfig : FAILED 2:15.29 beaver arm-tegra_defconfig : FAILED 1:44.23 beaver arm-multi_v7_defconfig : FAILED 1:50.46 beaver arm-multi_v7_nosmp_defconfig : FAILED 2:08.66 chitra powerpc-pasemi_defconfig : BUILD FAILED colombus arm-multi_v7_nosmp_defconfig : FAILED 3:20.67 dalmore arm-tegra_defconfig : FAILED 1:48.87 dalmore arm-multi_v7_defconfig : FAILED 2:00.13 dalmore arm-multi_lpae_defconfig : FAILED 2:13.04 dalmore arm-multi_v7_nosmp_defconfig : FAILED 1:51.96 hummingboard arm-imx_v6_v7_defconfig : FAILED 1:50.61 hummingboard arm-multi_v7_defconfig : FAILED 2:15.89 hummingboard arm-multi_v7_nosmp_defconfig : FAILED 1:45.03 jetsontx1 arm64-defconfig : NO DTB jetsontx1 arm64-nosmp_defconfig : NO DTB odroidu3 arm-exynos_defconfig : FAILED 1:52.31 odroidu3 arm-multi_v7_defconfig : FAILED 2:18.95 seaboard arm-tegra_defconfig : FAILED 1:51.29 seaboard arm-multi_v7_nosmp_defconfig : FAILED 1:55.74 snow arm-multi_v7_nosmp_defconfig : FAILED 0:51.00 snowball arm-u8500_defconfig : FAILED 2:03.37 snowball arm-multi_v7_defconfig : FAILED 3:17.15 snowball arm-multi_v7_nosmp_defconfig : FAILED 2:08.14 wandboard arm-imx_v6_v7_defconfig : FAILED 2:58.06
Successful boards:
apc arm-vt8500_v6_v7_defconfig : passed 1:15.37 arndale arm-exynos_defconfig : warnings 1:32.57 arndale arm-multi_v7_defconfig : passed 1:30.69 arndale arm-multi_lpae_defconfig : passed 1:47.34 capri arm-multi_v7_defconfig : passed 0:51.37 capri arm-multi_v7_nosmp_defconfig : warnings 1:12.44 chitra powerpc-ppc64_defconfig : passed 2:34.99 colombus arm-sunxi_defconfig : passed 2:02.63 colombus arm-multi_v7_defconfig : passed 3:06.37 colombus arm-multi_lpae_defconfig : passed 2:11.03 cosmic arm-imx_v6_v7_defconfig : passed 3:22.82 cosmic arm-multi_v7_defconfig : passed 4:08.13 cosmic arm-multi_v7_nosmp_defconfig : passed 2:40.43 cubie arm-sunxi_defconfig : passed 0:49.50 cubie arm-multi_v7_defconfig : passed 0:54.82 cubie arm-multi_v7_nosmp_defconfig : passed 0:57.49 cubie2 arm-sunxi_defconfig : passed 0:51.56 cubie2 arm-multi_v7_defconfig : passed 0:57.45 cubie2 arm-multi_lpae_defconfig : passed 0:53.60 cubie2 arm-multi_v7_nosmp_defconfig : warnings 1:23.99 cubox arm-multi_v7_defconfig : passed 1:16.86 cubox arm-mvebu_v7_defconfig : passed 1:16.26 cubox arm-multi_v7_nosmp_defconfig : passed 1:10.24 jetsontk1 arm-tegra_defconfig : passed 1:36.35 jetsontk1 arm-multi_v7_defconfig : passed 1:34.19 jetsontk1 arm-multi_lpae_defconfig : passed 2:03.96 jetsontk1 arm-multi_v7_nosmp_defconfig : warnings 1:37.16 minnowmax x86-minnowmax_defconfig : passed 2:09.32 omap5uevm arm-omap2plus_defconfig : passed 1:09.17 omap5uevm arm-multi_v7_defconfig : passed 1:09.82 omap5uevm arm-multi_lpae_defconfig : passed 1:14.96 omap5uevm arm-multi_v7_nosmp_defconfig : warnings 1:35.71 pandaes arm-omap2plus_defconfig : passed 1:42.31 pandaes arm-multi_v7_defconfig : passed 1:57.80 pandaes arm-multi_v7_nosmp_defconfig : warnings 2:28.70 parallella arm-multi_v7_defconfig : passed 3:11.65 parallella arm-multi_v7_nosmp_defconfig : warnings 2:41.01 pi arm-exynos_defconfig : passed 1:28.67 pi arm-multi_v7_defconfig : passed 1:36.77 pi arm-multi_lpae_defconfig : passed 2:28.26 pi arm-multi_v7_nosmp_defconfig : warnings 1:32.61 pit arm-exynos_defconfig : passed 1:28.15 pit arm-multi_v7_defconfig : passed 1:32.49 pit arm-multi_lpae_defconfig : passed 1:35.92 seattle arm64-defconfig : passed 2:32.89 seattle arm64-nosmp_defconfig : passed 2:01.12 snow arm-exynos_defconfig : passed 1:07.52 snow arm-multi_v7_defconfig : passed 1:31.61 snow arm-multi_lpae_defconfig : passed 1:26.58 socfpga arm-socfpga_defconfig : passed 1:21.78 socfpga arm-multi_v7_defconfig : passed 3:16.31 socfpga arm-multi_v7_nosmp_defconfig : warnings 1:16.70 trimslice arm-tegra_defconfig : passed 1:35.39 trimslice arm-multi_v7_defconfig : passed 1:47.01 trimslice arm-multi_v7_nosmp_defconfig : warnings 2:49.92 wandboard arm-multi_v7_defconfig : passed 1:28.17 wandboard arm-multi_v7_nosmp_defconfig : warnings 1:22.36
Offline boards:
colibri-vf61 arm-imx_v6_v7_defconfig : OFFLINE 1:17.22 colibri-vf61 arm-multi_v7_defconfig : OFFLINE 1:20.54 colibri-vf61 arm-multi_v7_nosmp_defconfig : OFFLINE 1:26.28 pit arm-multi_v7_nosmp_defconfig : OFFLINE 2:56.13 rk3288evb arm-multi_v7_defconfig : OFFLINE 0:49.67 rk3288evb arm-multi_lpae_defconfig : OFFLINE 0:50.29 rk3288evb arm-multi_v7_nosmp_defconfig : OFFLINE 1:03.63 sama5 arm-sama5_defconfig : OFFLINE 2:16.24 sama5d3-xplained arm-sama5_defconfig : OFFLINE 2:56.65 seaboard arm-multi_v7_defconfig : OFFLINE 2:17.74
Board legend is available at http://arm-soc.lixom.net/boards.html
Last entries of failed logs below:
========================================================================
Board arndale-arm-multi_v7_nosmp_defconfig failure log: -------------------------------------------------
[ 2.244467] MAIN_DC: disabling [ 2.246040] hdmi-en: disabling [ 2.249457] ahci 122f0000.sata: couldn't get PHY in node sata: -517 [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 4.4.31-rc1-00035-gf821e08 (build@brutus) (gcc version 6.1.0 (GCC) ) #1 Tue Nov 8 08:22:01 PST 2016 [ 0.000000] CPU: ARMv7 Processor [410fc0f4] revision 4 (ARMv7), cr=10c53c7d [ 2.277808] [c0f26e50] *pgd=40e0040e(bad) [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache [ 0.000000] Machine model: Insignal Arndale evaluation board based on EXYNOS5250 [ 2.296125] Modules linked in: [ 0.000000] cma: Reserved 64 MiB at 0xbc000000 [ 0.000000] Memory policy: Data cache writeback [ 0.000000] Samsung CPU ID: 0x43520010 [ 0.000000] On node 0 totalpages: 520192 [ 0.000000] free_area_init_node: node 0, pgdat c0f68884, node_mem_map eeff7000 [ 0.000000] DMA zone: 1536 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 192512 pages, LIFO batch:31 [ 0.000000] HighMem zone: 327680 pages, LIFO batch:31 [ 0.000000] ------------[ cut here ]------------ [ 0.000000] WARNING: CPU: 0 PID: 0 at /work/build/batch/arch/arm/kernel/devtree.c:157 arm_dt_init_cpu_maps+0x114/0x168() [ 0.000000] DT /cpu 2 nodes greater than max cores 1, capping them [ 0.000000] Modules linked in: [ 0.000000] CPU: 0 PID: 0 Comm: swapper Not tainted 4.4.31-rc1-00035-gf821e08 #1 [ 0.000000] Hardware name: SAMSUNG EXYNOS (Flattened Device Tree) [ 0.000000] [<c021768c>] (unwind_backtrace) from [<c0214204>] (show_stack+0x10/0x14) [ 0.000000] [<c0214204>] (show_stack) from [<c02406b0>] (warn_slowpath_common+0x80/0xac) [ 0.000000] [<c02406b0>] (warn_slowpath_common) from [<c024070c>] (warn_slowpath_fmt+0x30/0x40) [ 0.000000] [<c024070c>] (warn_slowpath_fmt) from [<c0d8bfdc>] (arm_dt_init_cpu_maps+0x114/0x168) [ 0.000000] [<c0d8bfdc>] (arm_dt_init_cpu_maps) from [<c0d8b2f0>] (setup_arch+0x710/0x848) [ 0.000000] [<c0d8b2f0>] (setup_arch) from [<c0d88960>] (start_kernel+0x94/0x398) [ 0.000000] [<c0d88960>] (start_kernel) from [<40208078>] (0x40208078) [ 0.000000] ---[ end trace cb88537fdc8fa200 ]---
[PYBOOT] [arndale 02:39]: Timed out waiting for "<type 'str'>":
[PYBOOT] [arndale 02:40]: got exception: timeout ~$off
[PYBOOT] [arndale 02:42]: Done.
========================================================================
Board bbb-arm-multi_v7_defconfig failure log: -------------------------------------------------
[ 1.529636] omap_hsmmc 48060000.mmc: Got CD GPIO [ 1.595998] Synopsys Designware Multimedia Card Interface Driver [ 1.603808] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.613441] ledtrig-cpu: registered to indicate activity on CPUs [ 1.620269] usbcore: registered new interface driver usbhid [ 1.626168] usbhid: USB HID core driver [ 1.636865] NET: Registered protocol family 10 [ 1.643364] sit: IPv6 over IPv4 tunneling driver [ 1.649505] NET: Registered protocol family 17 [ 1.654270] can: controller area network core (rev 20120528 abi 9) [ 1.660912] NET: Registered protocol family 29 [ 1.665634] can: raw protocol (rev 20120528) [ 1.670155] can: broadcast manager protocol (rev 20120528 t) [ 1.676151] can: netlink gateway (rev 20130117) max_hops=1 [ 1.682842] Key type dns_resolver registered [ 1.687722] omap_voltage_late_init: Voltage driver support not added [ 1.695872] ThumbEE CPU extension supported. [ 1.700484] Registering SWP/SWPB emulation handler [ 1.714463] at24 0-0050: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.722208] omap_i2c 44e0b000.i2c: bus 0 rev0.11 at 400 kHz [ 1.730621] at24 2-0054: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.738297] at24 2-0055: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.745893] at24 2-0056: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.753449] at24 2-0057: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.760767] omap_i2c 4819c000.i2c: bus 2 rev0.11 at 100 kHz [ 1.768928] hctosys: unable to open rtc device (rtc0) [ 1.782588] Waiting for root device /dev/mmcblk1p2... [ 1.818001] mmc1: MAN_BKOPS_EN bit is not set [ 1.824514] mmc1: new high speed MMC card at address 0001 [ 1.831198] mmcblk0: mmc1:0001 MMC02G 1.79 GiB [ 1.836409] mmcblk0boot0: mmc1:0001 MMC02G partition 1 1.00 MiB [ 1.843004] mmcblk0boot1: mmc1:0001 MMC02G partition 2 1.00 MiB [ 1.851538] mmcblk0: p1 p2
[PYBOOT] [bbb 01:53]: Timed out waiting for "<type 'str'>":
[PYBOOT] [bbb 01:54]: got exception: timeout ~$off
[PYBOOT] [bbb 01:55]: Done.
========================================================================
Board bbb-arm-multi_v7_nosmp_defconfig failure log: -------------------------------------------------
[ 1.350537] sdhci: Copyright(c) Pierre Ossman [ 1.356334] omap_hsmmc 48060000.mmc: Got CD GPIO [ 1.418945] Synopsys Designware Multimedia Card Interface Driver [ 1.426473] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.435590] ledtrig-cpu: registered to indicate activity on CPUs [ 1.442314] usbcore: registered new interface driver usbhid [ 1.448193] usbhid: USB HID core driver [ 1.457543] NET: Registered protocol family 10 [ 1.464053] sit: IPv6 over IPv4 tunneling driver [ 1.469980] NET: Registered protocol family 17 [ 1.474714] can: controller area network core (rev 20120528 abi 9) [ 1.481307] NET: Registered protocol family 29 [ 1.486004] can: raw protocol (rev 20120528) [ 1.490514] can: broadcast manager protocol (rev 20120528 t) [ 1.496491] can: netlink gateway (rev 20130117) max_hops=1 [ 1.503127] Key type dns_resolver registered [ 1.507969] omap_voltage_late_init: Voltage driver support not added [ 1.515789] ThumbEE CPU extension supported. [ 1.528120] at24 0-0050: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.535688] omap_i2c 44e0b000.i2c: bus 0 rev0.11 at 400 kHz [ 1.543462] at24 2-0054: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.550988] at24 2-0055: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.558474] at24 2-0056: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.565948] at24 2-0057: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.573221] omap_i2c 4819c000.i2c: bus 2 rev0.11 at 100 kHz [ 1.580810] hctosys: unable to open rtc device (rtc0) [ 1.591723] Waiting for root device /dev/mmcblk1p2... [ 1.626032] mmc1: MAN_BKOPS_EN bit is not set [ 1.632413] mmc1: new high speed MMC card at address 0001 [ 1.638865] mmcblk0: mmc1:0001 MMC02G 1.79 GiB [ 1.643934] mmcblk0boot0: mmc1:0001 MMC02G partition 1 1.00 MiB [ 1.650412] mmcblk0boot1: mmc1:0001 MMC02G partition 2 1.00 MiB [ 1.658660] mmcblk0: p1 p2
[PYBOOT] [bbb 02:18]: Timed out waiting for "<type 'str'>":
[PYBOOT] [bbb 02:19]: got exception: timeout ~$off
[PYBOOT] [bbb 02:20]: Done.
========================================================================
Board bbb-arm-omap2plus_defconfig failure log: -------------------------------------------------
[ 2.052773] omap_hsmmc 481d8000.mmc: GPIO lookup for consumer wp [ 2.059107] omap_hsmmc 481d8000.mmc: using device tree for GPIO lookup [ 2.065990] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@481d8000[0]' [ 2.075596] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@481d8000[0]' [ 2.085105] omap_hsmmc 481d8000.mmc: using lookup tables for GPIO lookup [ 2.092131] omap_hsmmc 481d8000.mmc: lookup for GPIO wp failed [ 2.135648] ledtrig-cpu: registered to indicate activity on CPUs [ 2.143794] oprofile: using arm/armv7 [ 2.148955] Initializing XFRM netlink socket [ 2.154010] NET: Registered protocol family 10 [ 2.164252] sit: IPv6 over IPv4 tunneling driver [ 2.172960] NET: Registered protocol family 17 [ 2.177890] NET: Registered protocol family 15 [ 2.183159] Key type dns_resolver registered [ 2.188115] omap_voltage_late_init: Voltage driver support not added [ 2.194798] sr_dev_init: No voltage domain specified for smartreflex0. Cannot initialize [ 2.203345] sr_dev_init: No voltage domain specified for smartreflex1. Cannot initialize [ 2.213594] ThumbEE CPU extension supported. [ 2.218248] Registering SWP/SWPB emulation handler [ 2.223281] SmartReflex Class3 initialized [ 2.292360] mmc1: MAN_BKOPS_EN bit is not set [ 2.303041] mmc1: new high speed MMC card at address 0001 [ 2.315080] mmcblk0: mmc1:0001 MMC02G 1.79 GiB [ 2.325744] tps65217 0-0024: TPS65217 ID 0xe version 1.2 [ 2.332855] omap_i2c 44e0b000.i2c: bus 0 rev0.11 at 400 kHz [ 2.340815] mmcblk0boot0: mmc1:0001 MMC02G partition 1 1.00 MiB [ 2.348775] mmcblk0boot1: mmc1:0001 MMC02G partition 2 1.00 MiB [ 2.361988] omap_i2c 4819c000.i2c: bus 2 rev0.11 at 100 kHz [ 2.372457] mmcblk0: p1 p2 [ 2.378149] hctosys: unable to open rtc device (rtc0) [ 2.383467] sr_init: No PMIC hook to init smartreflex [ 2.389283] sr_init: platform driver register failed for SR [ 2.444339] Waiting for root device /dev/mmcblk1p2...
[PYBOOT] [bbb 01:51]: Timed out waiting for "<type 'str'>":
[PYBOOT] [bbb 01:52]: got exception: timeout ~$off
[PYBOOT] [bbb 01:53]: Done.
========================================================================
Board beagleboard-x15-arm-multi_lpae_defconfig failure log: -------------------------------------------------
[ 1.571260] NET: Registered protocol family 10 [ 1.576512] sit: IPv6 over IPv4 tunneling driver [ 1.581806] NET: Registered protocol family 17 [ 1.586472] can: controller area network core (rev 20120528 abi 9) [ 1.592980] NET: Registered protocol family 29 [ 1.597641] can: raw protocol (rev 20120528) [ 1.602116] can: broadcast manager protocol (rev 20120528 t) [ 1.608047] can: netlink gateway (rev 20130117) max_hops=1 [ 1.614085] Key type dns_resolver registered [ 1.618644] omap_voltage_late_init: Voltage driver support not added [ 1.625787] Power Management for TI OMAP4+ devices. [ 1.631094] ThumbEE CPU extension supported. [ 1.635592] Registering SWP/SWPB emulation handler [ 1.642440] palmas 0-0058: Irq flag is 0x00000008 [ 1.666975] palmas 0-0058: Muxing GPIO 2f, PWM 0, LED 0 [ 1.698066] palmas-rtc 48070000.i2c:tps659038@58:tps659038_rtc: rtc core: registered 48070000.i2c:tps659 as rtc1 [ 1.712251] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 1.735299] rtc-ds1307 2-006f: SET TIME! [ 1.741061] rtc-ds1307 2-006f: rtc core: registered mcp7941x as rtc0 [ 1.747830] rtc-ds1307 2-006f: 64 bytes nvram [ 1.752438] omap_i2c 48060000.i2c: bus 2 rev0.12 at 400 kHz [ 1.761282] omap_hsmmc 4809c000.mmc: Got CD GPIO [ 1.795803] vdd_3v3: supplied by regen1 [ 1.836605] rtc-ds1307 2-006f: setting system clock to 2001-01-01 00:00:00 UTC (978307200) [ 1.853775] aic_dvdd_fixed: disabling [ 1.857796] ldousb: disabling [ 1.861836] Waiting for root device /dev/mmcblk1p1... [ 1.879372] mmc1: MAN_BKOPS_EN bit is not set [ 1.891361] mmc1: new high speed MMC card at address 0001 [ 1.897344] mmcblk0: mmc1:0001 S10004 3.56 GiB [ 1.902244] mmcblk0boot0: mmc1:0001 S10004 partition 1 4.00 MiB [ 1.908592] mmcblk0boot1: mmc1:0001 S10004 partition 2 4.00 MiB [ 1.915439] mmcblk0: p1
[PYBOOT] [beagleboard-x15 01:49]: Timed out waiting for "<type 'str'>":
[PYBOOT] [beagleboard-x15 01:50]: got exception: timeout ~$off
[PYBOOT] [beagleboard-x15 01:51]: Done.
========================================================================
Board beagleboard-x15-arm-multi_v7_defconfig failure log: -------------------------------------------------
[ 1.566085] NET: Registered protocol family 10 [ 1.571361] sit: IPv6 over IPv4 tunneling driver [ 1.576642] NET: Registered protocol family 17 [ 1.581305] can: controller area network core (rev 20120528 abi 9) [ 1.587817] NET: Registered protocol family 29 [ 1.592475] can: raw protocol (rev 20120528) [ 1.596943] can: broadcast manager protocol (rev 20120528 t) [ 1.602862] can: netlink gateway (rev 20130117) max_hops=1 [ 1.608889] Key type dns_resolver registered [ 1.613441] omap_voltage_late_init: Voltage driver support not added [ 1.620582] Power Management for TI OMAP4+ devices. [ 1.625890] ThumbEE CPU extension supported. [ 1.630385] Registering SWP/SWPB emulation handler [ 1.637263] palmas 0-0058: Irq flag is 0x00000008 [ 1.661840] palmas 0-0058: Muxing GPIO 2f, PWM 0, LED 0 [ 1.692773] palmas-rtc 48070000.i2c:tps659038@58:tps659038_rtc: rtc core: registered 48070000.i2c:tps659 as rtc1 [ 1.706902] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 1.730207] rtc-ds1307 2-006f: SET TIME! [ 1.735954] rtc-ds1307 2-006f: rtc core: registered mcp7941x as rtc0 [ 1.742719] rtc-ds1307 2-006f: 64 bytes nvram [ 1.747327] omap_i2c 48060000.i2c: bus 2 rev0.12 at 400 kHz [ 1.756189] omap_hsmmc 4809c000.mmc: Got CD GPIO [ 1.790705] vdd_3v3: supplied by regen1 [ 1.831312] rtc-ds1307 2-006f: setting system clock to 2001-01-01 00:00:00 UTC (978307200) [ 1.848421] aic_dvdd_fixed: disabling [ 1.852429] ldousb: disabling [ 1.859557] Waiting for root device /dev/mmcblk1p1... [ 1.894275] mmc1: MAN_BKOPS_EN bit is not set [ 1.906298] mmc1: new high speed MMC card at address 0001 [ 1.912304] mmcblk0: mmc1:0001 S10004 3.56 GiB [ 1.917200] mmcblk0boot0: mmc1:0001 S10004 partition 1 4.00 MiB [ 1.923551] mmcblk0boot1: mmc1:0001 S10004 partition 2 4.00 MiB [ 1.930391] mmcblk0: p1
[PYBOOT] [beagleboard-x15 01:40]: Timed out waiting for "<type 'str'>":
[PYBOOT] [beagleboard-x15 01:41]: got exception: timeout ~$off
[PYBOOT] [beagleboard-x15 01:42]: Done.
========================================================================
Board beagleboard-x15-arm-multi_v7_nosmp_defconfig failure log: -------------------------------------------------
[ 1.456511] NET: Registered protocol family 10 [ 1.461760] sit: IPv6 over IPv4 tunneling driver [ 1.466931] NET: Registered protocol family 17 [ 1.471595] can: controller area network core (rev 20120528 abi 9) [ 1.478086] NET: Registered protocol family 29 [ 1.482741] can: raw protocol (rev 20120528) [ 1.487210] can: broadcast manager protocol (rev 20120528 t) [ 1.493136] can: netlink gateway (rev 20130117) max_hops=1 [ 1.499106] Key type dns_resolver registered [ 1.503656] omap_voltage_late_init: Voltage driver support not added [ 1.510601] Power Management for TI OMAP4+ devices. [ 1.515870] ThumbEE CPU extension supported. [ 1.520445] ata1: SATA link down (SStatus 0 SControl 300) [ 1.527375] palmas 0-0058: Irq flag is 0x00000008 [ 1.552450] palmas 0-0058: Muxing GPIO 2f, PWM 0, LED 0 [ 1.580659] palmas-rtc 48070000.i2c:tps659038@58:tps659038_rtc: rtc core: registered 48070000.i2c:tps659 as rtc1 [ 1.593974] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 1.616011] rtc-ds1307 2-006f: SET TIME! [ 1.621630] rtc-ds1307 2-006f: rtc core: registered mcp7941x as rtc0 [ 1.628326] rtc-ds1307 2-006f: 64 bytes nvram [ 1.632903] omap_i2c 48060000.i2c: bus 2 rev0.12 at 400 kHz [ 1.640734] omap_hsmmc 4809c000.mmc: Got CD GPIO [ 1.676232] vdd_3v3: supplied by regen1 [ 1.711380] rtc-ds1307 2-006f: setting system clock to 2001-01-01 00:00:00 UTC (978307200) [ 1.723780] aic_dvdd_fixed: disabling [ 1.727778] ldousb: disabling [ 1.731574] Waiting for root device /dev/mmcblk1p1... [ 1.770121] mmc1: MAN_BKOPS_EN bit is not set [ 1.782106] mmc1: new high speed MMC card at address 0001 [ 1.787979] mmcblk0: mmc1:0001 S10004 3.56 GiB [ 1.792813] mmcblk0boot0: mmc1:0001 S10004 partition 1 4.00 MiB [ 1.799103] mmcblk0boot1: mmc1:0001 S10004 partition 2 4.00 MiB [ 1.805848] mmcblk0: p1
[PYBOOT] [beagleboard-x15 02:11]: Timed out waiting for "<type 'str'>":
[PYBOOT] [beagleboard-x15 02:12]: got exception: timeout ~$off
[PYBOOT] [beagleboard-x15 02:13]: Done.
========================================================================
Board beagleboard-x15-arm-omap2plus_defconfig failure log: -------------------------------------------------
[ 2.177530] of_get_named_gpiod_flags: parsed 'cd-gpios' property of node '/ocp/mmc@4809c000[0]' - status (0) [ 2.187911] omap_hsmmc 4809c000.mmc: Got CD GPIO [ 2.192772] omap_hsmmc 4809c000.mmc: GPIO lookup for consumer wp [ 2.199063] omap_hsmmc 4809c000.mmc: using device tree for GPIO lookup [ 2.205919] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@4809c000[0]' [ 2.215521] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@4809c000[0]' [ 2.225020] omap_hsmmc 4809c000.mmc: using lookup tables for GPIO lookup [ 2.232070] omap_hsmmc 4809c000.mmc: lookup for GPIO wp failed [ 2.272603] omap_hsmmc 480b4000.mmc: GPIO lookup for consumer cd [ 2.278906] omap_hsmmc 480b4000.mmc: using device tree for GPIO lookup [ 2.285786] of_get_named_gpiod_flags: can't parse 'cd-gpios' property of node '/ocp/mmc@480b4000[0]' [ 2.295385] of_get_named_gpiod_flags: can't parse 'cd-gpio' property of node '/ocp/mmc@480b4000[0]' [ 2.304889] omap_hsmmc 480b4000.mmc: using lookup tables for GPIO lookup [ 2.311944] omap_hsmmc 480b4000.mmc: lookup for GPIO cd failed [ 2.318064] omap_hsmmc 480b4000.mmc: GPIO lookup for consumer wp [ 2.324377] omap_hsmmc 480b4000.mmc: using device tree for GPIO lookup [ 2.331259] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@480b4000[0]' [ 2.340888] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@480b4000[0]' [ 2.350391] omap_hsmmc 480b4000.mmc: using lookup tables for GPIO lookup [ 2.357468] omap_hsmmc 480b4000.mmc: lookup for GPIO wp failed [ 2.364307] vdd_3v3: supplied by regen1 [ 2.402872] hctosys: unable to open rtc device (rtc0) [ 2.408182] sr_init: No PMIC hook to init smartreflex [ 2.413738] sr_init: platform driver register failed for SR [ 2.456876] mmc1: MAN_BKOPS_EN bit is not set [ 2.465203] aic_dvdd_fixed: disabling [ 2.469423] ldousb: disabling [ 2.473854] mmc1: new high speed MMC card at address 0001 [ 2.480218] Waiting for root device /dev/mmcblk1p1... [ 2.481566] mmcblk0: mmc1:0001 S10004 3.56 GiB [ 2.482264] mmcblk0boot0: mmc1:0001 S10004 partition 1 4.00 MiB [ 2.483037] mmcblk0boot1: mmc1:0001 S10004 partition 2 4.00 MiB [ 2.496700] mmcblk0: p1
[PYBOOT] [beagleboard-x15 01:41]: Timed out waiting for "<type 'str'>":
[PYBOOT] [beagleboard-x15 01:42]: got exception: timeout ~$off
[PYBOOT] [beagleboard-x15 01:43]: Done.
========================================================================
Board beaver-arm-multi_v7_defconfig failure log: -------------------------------------------------
[ 3.178358] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 3.183941] r8169 0000:01:00.0: enabling device (0140 -> 0143) [ 3.190950] r8169 0000:01:00.0 eth0: RTL8168evl/8111evl at 0xf08d6000, 02:04:4b:01:60:99, XID 0c900800 IRQ 375 [ 3.200950] r8169 0000:01:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko] [ 3.210280] +VDD_5V_HDMI: supplied by sys_3v3,vdd_3v3_alw [ 3.215767] vdd_1v8_gen: supplied by vdd_5v_in [ 3.221835] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 3.228465] [drm] No driver support for vblank timestamp query. [ 3.234421] drm drm: No connectors reported connected with modes [ 3.240443] [drm] Cannot find any crtc or sizes - going 1024x768 [ 3.265460] Console: switching to colour frame buffer device 128x48 [ 3.277453] drm drm: fb0: frame buffer device [ 3.293294] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 3.301715] usb3_vbus: supplied by vdd_5v_in [ 3.308107] utmi_phy_clk_enable: timeout waiting for phy to stabilize [ 3.314576] tegra-ehci 7d004000.usb: EHCI Host Controller [ 3.319986] tegra-ehci 7d004000.usb: new USB bus registered, assigned bus number 1 [ 3.327817] tegra-ehci 7d004000.usb: irq 343, io mem 0x7d004000 [ 3.343302] tegra-ehci 7d004000.usb: USB 2.0 started, EHCI 1.00 [ 3.350070] hub 1-0:1.0: USB hub found [ 3.353855] hub 1-0:1.0: 1 port detected [ 3.358666] tegra-ehci 7d008000.usb: EHCI Host Controller [ 3.364082] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 2 [ 3.371841] tegra-ehci 7d008000.usb: irq 344, io mem 0x7d008000 [ 3.388294] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.00 [ 3.394992] hub 2-0:1.0: USB hub found [ 3.398771] hub 2-0:1.0: 1 port detected [ 3.407037] tps65910-rtc tps65910-rtc: setting system clock to 2000-01-01 00:00:02 UTC (946684802) [ 3.420924] vdd_sata,avdd_plle: disabling [ 3.425359] usb1_vbus: disabling [ 3.429411] Waiting for root device /dev/mmcblk1p1... [ 3.708302] usb 2-1: new high-speed USB device number 2 using tegra-ehci [ 4.646815] asix 2-1:1.0 eth1: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 58:6d:8f:50:ba:18
[PYBOOT] [beaver 01:47]: Timed out waiting for "<type 'str'>":
[PYBOOT] [beaver 01:48]: got exception: timeout ~$off
[PYBOOT] [beaver 01:49]: Done.
========================================================================
Board beaver-arm-multi_v7_nosmp_defconfig failure log: -------------------------------------------------
[ 3.152893] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 3.158475] r8169 0000:01:00.0: enabling device (0140 -> 0143) [ 3.165072] r8169 0000:01:00.0 eth0: RTL8168evl/8111evl at 0xf08d6000, 02:04:4b:01:60:99, XID 0c900800 IRQ 375 [ 3.175066] r8169 0000:01:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko] [ 3.184221] +VDD_5V_HDMI: supplied by sys_3v3,vdd_3v3_alw [ 3.189702] vdd_1v8_gen: supplied by vdd_5v_in [ 3.195281] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 3.201894] [drm] No driver support for vblank timestamp query. [ 3.207826] drm drm: No connectors reported connected with modes [ 3.213830] [drm] Cannot find any crtc or sizes - going 1024x768 [ 3.233092] Console: switching to colour frame buffer device 128x48 [ 3.244850] drm drm: fb0: frame buffer device [ 3.249287] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 3.257213] usb3_vbus: supplied by vdd_5v_in [ 3.263463] utmi_phy_clk_enable: timeout waiting for phy to stabilize [ 3.269909] tegra-ehci 7d004000.usb: EHCI Host Controller [ 3.275312] tegra-ehci 7d004000.usb: new USB bus registered, assigned bus number 1 [ 3.283034] tegra-ehci 7d004000.usb: irq 343, io mem 0x7d004000 [ 3.297980] tegra-ehci 7d004000.usb: USB 2.0 started, EHCI 1.00 [ 3.304319] hub 1-0:1.0: USB hub found [ 3.308084] hub 1-0:1.0: 1 port detected [ 3.312706] tegra-ehci 7d008000.usb: EHCI Host Controller [ 3.318113] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 2 [ 3.325770] tegra-ehci 7d008000.usb: irq 344, io mem 0x7d008000 [ 3.337976] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.00 [ 3.344237] hub 2-0:1.0: USB hub found [ 3.348002] hub 2-0:1.0: 1 port detected [ 3.355482] tps65910-rtc tps65910-rtc: setting system clock to 2000-01-01 00:00:02 UTC (946684802) [ 3.368738] vdd_sata,avdd_plle: disabling [ 3.373128] usb1_vbus: disabling [ 3.377040] Waiting for root device /dev/mmcblk1p1... [ 3.657984] usb 2-1: new high-speed USB device number 2 using tegra-ehci [ 4.596451] asix 2-1:1.0 eth1: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 58:6d:8f:50:ba:18
[PYBOOT] [beaver 02:05]: Timed out waiting for "<type 'str'>":
[PYBOOT] [beaver 02:06]: got exception: timeout ~$off
[PYBOOT] [beaver 02:07]: Done.
========================================================================
Board beaver-arm-tegra_defconfig failure log: -------------------------------------------------
[ 3.583693] r8169 0000:01:00.0 eth0: RTL8168evl/8111evl at 0xf08b6000, 02:04:4b:01:60:99, XID 0c900800 IRQ 375 [ 3.593694] r8169 0000:01:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko] [ 3.602565] +VDD_5V_HDMI: supplied by sys_3v3,vdd_3v3_alw [ 3.608086] vdd_1v8_gen: supplied by vdd_5v_in [ 3.616349] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 3.622987] [drm] No driver support for vblank timestamp query. [ 3.628983] drm drm: No connectors reported connected with modes [ 3.634999] [drm] Cannot find any crtc or sizes - going 1024x768 [ 3.660871] Console: switching to colour frame buffer device 128x48 [ 3.672658] drm drm: fb0: frame buffer device [ 3.700274] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 3.707746] usb3_vbus: supplied by vdd_5v_in [ 3.713871] utmi_phy_clk_enable: timeout waiting for phy to stabilize [ 3.720336] tegra-ehci 7d004000.usb: EHCI Host Controller [ 3.725753] tegra-ehci 7d004000.usb: new USB bus registered, assigned bus number 1 [ 3.733725] tegra-ehci 7d004000.usb: irq 343, io mem 0x7d004000 [ 3.750283] tegra-ehci 7d004000.usb: USB 2.0 started, EHCI 1.00 [ 3.757818] hub 1-0:1.0: USB hub found [ 3.761611] hub 1-0:1.0: 1 port detected [ 3.766362] tegra-ehci 7d008000.usb: EHCI Host Controller [ 3.771796] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 2 [ 3.779655] tegra-ehci 7d008000.usb: irq 344, io mem 0x7d008000 [ 3.800274] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.00 [ 3.807680] hub 2-0:1.0: USB hub found [ 3.811462] hub 2-0:1.0: 1 port detected [ 3.819642] tps65910-rtc tps65910-rtc: setting system clock to 2000-01-01 00:00:02 UTC (946684802) [ 3.838085] vdd_sata,avdd_plle: disabling [ 3.842670] usb1_vbus: disabling [ 3.846108] ALSA device list: [ 3.849066] #0: NVIDIA Tegra Beaver [ 3.853305] Waiting for root device /dev/mmcblk1p1... [ 4.130277] usb 2-1: new high-speed USB device number 2 using tegra-ehci [ 5.115571] asix 2-1:1.0 eth1: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 58:6d:8f:50:ba:18
[PYBOOT] [beaver 01:41]: Timed out waiting for "<type 'str'>":
[PYBOOT] [beaver 01:42]: got exception: timeout ~$off
[PYBOOT] [beaver 01:43]: Done.
========================================================================
Board colombus-arm-multi_v7_nosmp_defconfig failure log: -------------------------------------------------
[....] Cleaning up temporary files... /tmp[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0c. [....] Activating lvm and md swap...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [....] Checking file systems...fsck from util-linux 2.20.1 [?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [....] Mounting local filesystems...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [....] Activating swapfile swap...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [....] Cleaning up temporary files...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0c. [....] Setting kernel variables ...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [ 81.621611] random: dd: uninitialized urandom read (512 bytes read, 51 bits of entropy available) [....] Configuring network interfaces...Internet Systems Consortium DHCP Client 4.2.2 Copyright 2004-2011 Internet Systems Consortium. All rights reserved. For info, please visit https://www.isc.org/software/dhcp/
[ 86.038814] eth0: device MAC address 3e:a3:66:37:f5:ea [ 86.190313] RX IPC Checksum Offload disabled [ 86.194942] No MAC Management Counters available Listening on LPF/eth0/3e:a3:66:37:f5:ea Sending on LPF/eth0/3e:a3:66:37:f5:ea Sending on Socket/fallback DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 4 DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 8 DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 8 DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 8 DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 10 DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 17 DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 6 No DHCPOFFERS received. No working leases in persistent database - sleeping. [?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [....] Cleaning up temporary files...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0c. INIT: Entering runlevel: 2 [[36minfo[39;49m] Using makefile-style concurrent boot in runlevel 2.
[PYBOOT] [colombus 03:18]: Timed out waiting for "<type 'str'>":
[PYBOOT] [colombus 03:19]: got exception: timeout ~$off
[PYBOOT] [colombus 03:20]: Done.
========================================================================
Board dalmore-arm-multi_lpae_defconfig failure log: -------------------------------------------------
[ 2.409922] mmcblk0boot1: mmc1:0001 SEM32G partition 2 4.00 MiB [ 2.410723] mmcblk0rpmb: mmc1:0001 SEM32G partition 3 4.00 MiB [ 2.413065] mmcblk0: p1 [ 2.441419] NET: Registered protocol family 29 [ 2.445994] can: raw protocol (rev 20120528) [ 2.450383] can: broadcast manager protocol (rev 20120528 t) [ 2.456176] can: netlink gateway (rev 20130117) max_hops=1 [ 2.463339] Key type dns_resolver registered [ 2.469664] ThumbEE CPU extension supported. [ 2.474083] Registering SWP/SWPB emulation handler [ 2.501471] vdd-sys-5v0: supplied by vdd_ac_bat [ 2.506760] VDD_5V0_HDMI_CON: supplied by vdd-sys-5v0 [ 2.515611] vdd_hdmi_5v0: supplied by vdd-sys-5v0 [ 2.531014] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 2.537928] [drm] No driver support for vblank timestamp query. [ 2.707559] Console: switching to colour frame buffer device 240x75 [ 2.794183] drm drm: fb0: frame buffer device [ 2.818142] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 2.827963] usb2_vbus: supplied by vdd-sys-5v0 [ 2.840769] tegra-ehci 7d008000.usb: EHCI Host Controller [ 2.846409] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 1 [ 2.855099] tegra-ehci 7d008000.usb: irq 339, io mem 0x7d008000 [ 2.868179] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.10 [ 2.878655] hub 1-0:1.0: USB hub found [ 2.882659] hub 1-0:1.0: 1 port detected [ 2.893323] input: gpio-keys as /devices/soc0/gpio-keys/input/input0 [ 2.907401] palmas-rtc 7000d000.i2c:tps65913@58:rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800) [ 2.973971] dvdd_ts: disabling [ 2.977079] usb1_vbus: disabling [ 2.980493] vdd_cam_1v8_reg: disabling [ 2.987581] Waiting for root device /dev/mmcblk1p1... [ 3.193224] usb 1-1: new high-speed USB device number 2 using tegra-ehci [ 4.155896] asix 1-1:1.0 eth0: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 48:f8:b3:2b:29:1f
[PYBOOT] [dalmore 02:09]: Timed out waiting for "<type 'str'>":
[PYBOOT] [dalmore 02:10]: got exception: timeout ~$off
[PYBOOT] [dalmore 02:11]: Done.
========================================================================
Board dalmore-arm-multi_v7_defconfig failure log: -------------------------------------------------
[ 2.404694] mmcblk0boot1: mmc1:0001 SEM32G partition 2 4.00 MiB [ 2.405514] mmcblk0rpmb: mmc1:0001 SEM32G partition 3 4.00 MiB [ 2.412515] mmcblk0: p1 [ 2.436312] NET: Registered protocol family 29 [ 2.440888] can: raw protocol (rev 20120528) [ 2.445276] can: broadcast manager protocol (rev 20120528 t) [ 2.451072] can: netlink gateway (rev 20130117) max_hops=1 [ 2.458208] Key type dns_resolver registered [ 2.464556] ThumbEE CPU extension supported. [ 2.468976] Registering SWP/SWPB emulation handler [ 2.496517] vdd-sys-5v0: supplied by vdd_ac_bat [ 2.502890] VDD_5V0_HDMI_CON: supplied by vdd-sys-5v0 [ 2.511536] vdd_hdmi_5v0: supplied by vdd-sys-5v0 [ 2.527918] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 2.534779] [drm] No driver support for vblank timestamp query. [ 2.706123] Console: switching to colour frame buffer device 240x75 [ 2.792758] drm drm: fb0: frame buffer device [ 2.812958] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 2.822596] usb2_vbus: supplied by vdd-sys-5v0 [ 2.835594] tegra-ehci 7d008000.usb: EHCI Host Controller [ 2.841189] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 1 [ 2.849879] tegra-ehci 7d008000.usb: irq 339, io mem 0x7d008000 [ 2.862998] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.10 [ 2.873421] hub 1-0:1.0: USB hub found [ 2.877497] hub 1-0:1.0: 1 port detected [ 2.888206] input: gpio-keys as /devices/soc0/gpio-keys/input/input0 [ 2.903010] palmas-rtc 7000d000.i2c:tps65913@58:rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800) [ 2.969208] dvdd_ts: disabling [ 2.972308] usb1_vbus: disabling [ 2.975693] vdd_cam_1v8_reg: disabling [ 2.982945] Waiting for root device /dev/mmcblk1p1... [ 3.188002] usb 1-1: new high-speed USB device number 2 using tegra-ehci [ 4.149810] asix 1-1:1.0 eth0: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 48:f8:b3:2b:29:1f
[PYBOOT] [dalmore 01:57]: Timed out waiting for "<type 'str'>":
[PYBOOT] [dalmore 01:58]: got exception: timeout ~$off
[PYBOOT] [dalmore 01:59]: Done.
========================================================================
Board dalmore-arm-multi_v7_nosmp_defconfig failure log: -------------------------------------------------
[ 2.057480] can: netlink gateway (rev 20130117) max_hops=1 [ 2.064220] Key type dns_resolver registered [ 2.069327] ThumbEE CPU extension supported. [ 2.101193] vdd-sys-5v0: supplied by vdd_ac_bat [ 2.106151] VDD_5V0_HDMI_CON: supplied by vdd-sys-5v0 [ 2.116279] vdd_hdmi_5v0: supplied by vdd-sys-5v0 [ 2.139269] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 2.145958] [drm] No driver support for vblank timestamp query. [ 2.226810] mmc1: MAN_BKOPS_EN bit is not set [ 2.310408] Console: switching to colour frame buffer device 240x75 [ 2.402400] drm drm: fb0: frame buffer device [ 2.407014] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 2.415187] usb2_vbus: supplied by vdd-sys-5v0 [ 2.421173] mmc1: new high speed MMC card at address 0001 [ 2.432997] tegra-ehci 7d008000.usb: EHCI Host Controller [ 2.438521] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 1 [ 2.446628] mmcblk0: mmc1:0001 SEM32G 29.1 GiB [ 2.451656] mmcblk0boot0: mmc1:0001 SEM32G partition 1 4.00 MiB [ 2.458059] mmcblk0boot1: mmc1:0001 SEM32G partition 2 4.00 MiB [ 2.464598] tegra-ehci 7d008000.usb: irq 339, io mem 0x7d008000 [ 2.470859] mmcblk0rpmb: mmc1:0001 SEM32G partition 3 4.00 MiB [ 2.478447] mmcblk0: p1 [ 2.481458] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.10 [ 2.494885] hub 1-0:1.0: USB hub found [ 2.498853] hub 1-0:1.0: 1 port detected [ 2.506100] input: gpio-keys as /devices/soc0/gpio-keys/input/input0 [ 2.517457] palmas-rtc 7000d000.i2c:tps65913@58:rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800) [ 2.558272] dvdd_ts: disabling [ 2.561422] usb1_vbus: disabling [ 2.564701] vdd_cam_1v8_reg: disabling [ 2.570119] Waiting for root device /dev/mmcblk1p1... [ 2.810719] usb 1-1: new high-speed USB device number 2 using tegra-ehci [ 3.764727] asix 1-1:1.0 eth0: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 48:f8:b3:2b:29:1f
[PYBOOT] [dalmore 01:49]: Timed out waiting for "<type 'str'>":
[PYBOOT] [dalmore 01:50]: got exception: timeout ~$off
[PYBOOT] [dalmore 01:51]: Done.
========================================================================
Board dalmore-arm-tegra_defconfig failure log: -------------------------------------------------
[ 2.804433] Bluetooth: RFCOMM socket layer initialized [ 2.809656] Bluetooth: RFCOMM ver 1.11 [ 2.813852] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 2.819256] Bluetooth: BNEP socket layer initialized [ 2.824349] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 2.830348] Bluetooth: HIDP socket layer initialized [ 2.837303] Key type dns_resolver registered [ 2.846897] Registering SWP/SWPB emulation handler [ 2.886620] vdd-sys-5v0: supplied by vdd_ac_bat [ 2.892750] VDD_5V0_HDMI_CON: supplied by vdd-sys-5v0 [ 2.903882] vdd_hdmi_5v0: supplied by vdd-sys-5v0 [ 2.928349] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 2.935260] [drm] No driver support for vblank timestamp query. [ 3.109460] Console: switching to colour frame buffer device 240x75 [ 3.195741] drm drm: fb0: frame buffer device [ 3.223756] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 3.230958] usb2_vbus: supplied by vdd-sys-5v0 [ 3.242773] tegra-ehci 7d008000.usb: EHCI Host Controller [ 3.248535] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 1 [ 3.257592] tegra-ehci 7d008000.usb: irq 339, io mem 0x7d008000 [ 3.283676] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.10 [ 3.297709] hub 1-0:1.0: USB hub found [ 3.301667] hub 1-0:1.0: 1 port detected [ 3.315746] input: gpio-keys as /devices/soc0/gpio-keys/input/input1 [ 3.329999] palmas-rtc 7000d000.i2c:tps65913@58:rtc: setting system clock to 2000-01-01 00:00:01 UTC (946684801) [ 3.422026] dvdd_ts: disabling [ 3.425276] usb1_vbus: disabling [ 3.428587] vdd_cam_1v8_reg: disabling [ 3.433341] ALSA device list: [ 3.436335] #0: NVIDIA Tegra Dalmore [ 3.442116] Waiting for root device /dev/mmcblk1p1... [ 3.623679] usb 1-1: new high-speed USB device number 2 using tegra-ehci [ 4.658267] asix 1-1:1.0 eth0: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 48:f8:b3:2b:29:1f
[PYBOOT] [dalmore 01:46]: Timed out waiting for "<type 'str'>":
[PYBOOT] [dalmore 01:47]: got exception: timeout ~$off
[PYBOOT] [dalmore 01:48]: Done.
========================================================================
Board hummingboard-arm-imx_v6_v7_defconfig failure log: -------------------------------------------------
[ 2.332470] usbhid: USB HID core driver [ 2.340788] mmc0: host does not support reading read-only switch, assuming write-enable [ 2.351830] fsl-asoc-card sound-sgtl5000: ASoC: CPU DAI (null) not registered [ 2.359107] fsl-asoc-card sound-sgtl5000: snd_soc_register_card failed (-517) [ 2.371009] mmc0: new high speed SDHC card at address b368 [ 2.380172] fsl-asrc 2034000.asrc: driver registered [ 2.389463] mmcblk0: mmc0:b368 00000 7.51 GiB [ 2.401864] mmcblk0: p1 p2 [ 3.007463] imx-sgtl5000 sound-sgtl5000: ASoC: CODEC DAI sgtl5000 not registered [ 3.014937] imx-sgtl5000 sound-sgtl5000: snd_soc_register_card failed (-517) [ 3.024699] imx-spdif sound-spdif: snd-soc-dummy-dai <-> 2004000.spdif mapping ok [ 3.038635] NET: Registered protocol family 10 [ 3.046036] sit: IPv6 over IPv4 tunneling driver [ 3.052815] NET: Registered protocol family 17 [ 3.057316] can: controller area network core (rev 20120528 abi 9) [ 3.063705] NET: Registered protocol family 29 [ 3.068197] can: raw protocol (rev 20120528) [ 3.072596] can: broadcast manager protocol (rev 20120528 t) [ 3.078297] can: netlink gateway (rev 20130117) max_hops=1 [ 3.084534] Key type dns_resolver registered [ 3.094036] Registering SWP/SWPB emulation handler [ 3.105008] imx_thermal 2000000.aips-bus:tempmon: Commercial CPU temperature grade - max:95C critical:90C passive:85C [ 3.117797] /soc/aips-bus@02100000/usdhc@02190000: voltage-ranges unspecified [ 3.125004] sdhci-esdhc-imx 2190000.usdhc: could not get ultra high speed state, work on normal mode [ 3.135329] fsl-asoc-card sound-sgtl5000: ASoC: CODEC DAI sgtl5000 not registered [ 3.142881] fsl-asoc-card sound-sgtl5000: snd_soc_register_card failed (-517) [ 3.150395] imx-sgtl5000 sound-sgtl5000: ASoC: CODEC DAI sgtl5000 not registered [ 3.157808] imx-sgtl5000 sound-sgtl5000: snd_soc_register_card failed (-517) [ 3.166252] snvs_rtc 20cc000.snvs:snvs-rtc-lp: setting system clock to 1970-01-01 00:00:01 UTC (1) [ 3.215949] brcm_reg: disabling [ 3.219652] ALSA device list: [ 3.222632] #0: On-board SPDIF [ 3.227297] Waiting for root device /dev/mmcblk1p2...
[PYBOOT] [hummingboard 01:47]: Timed out waiting for "<type 'str'>":
[PYBOOT] [hummingboard 01:48]: got exception: timeout ~$off
[PYBOOT] [hummingboard 01:49]: Done.
========================================================================
Board hummingboard-arm-multi_v7_defconfig failure log: -------------------------------------------------
[ 1.256748] sdhci-esdhc-imx 2190000.usdhc: could not get ultra high speed state, work on normal mode [ 1.266483] /soc/aips-bus@02100000/usdhc@02194000: voltage-ranges unspecified [ 1.273657] sdhci-esdhc-imx 2194000.usdhc: could not get ultra high speed state, work on normal mode [ 1.282833] sdhci-esdhc-imx 2194000.usdhc: Got CD GPIO [ 1.288767] sdhci-esdhc-imx 2194000.usdhc: No vqmmc regulator found [ 1.330133] mmc0: SDHCI controller on 2194000.usdhc [2194000.usdhc] using ADMA [ 1.339644] ledtrig-cpu: registered to indicate activity on CPUs [ 1.345911] usbcore: registered new interface driver usbhid [ 1.351511] usbhid: USB HID core driver [ 1.360389] NET: Registered protocol family 10 [ 1.367780] sit: IPv6 over IPv4 tunneling driver [ 1.373061] NET: Registered protocol family 17 [ 1.377558] can: controller area network core (rev 20120528 abi 9) [ 1.383823] NET: Registered protocol family 29 [ 1.388301] can: raw protocol (rev 20120528) [ 1.392599] can: broadcast manager protocol (rev 20120528 t) [ 1.398290] can: netlink gateway (rev 20130117) max_hops=1 [ 1.404269] Key type dns_resolver registered [ 1.408726] ThumbEE CPU extension supported. [ 1.413040] Registering SWP/SWPB emulation handler [ 1.428818] imx-gpc 20dc000.gpc: failed to get pu regulator: -517 [ 1.437255] /soc/aips-bus@02100000/usdhc@02190000: voltage-ranges unspecified [ 1.444450] sdhci-esdhc-imx 2190000.usdhc: could not get ultra high speed state, work on normal mode [ 1.456517] hctosys: unable to open rtc device (rtc0) [ 1.471119] brcm_reg: disabling [ 1.475262] Waiting for root device /dev/mmcblk1p2... [ 1.512580] mmc0: host does not support reading read-only switch, assuming write-enable [ 1.526667] mmc0: new high speed SDHC card at address b368 [ 1.532645] mmcblk0: mmc0:b368 00000 7.51 GiB [ 1.538562] mmcblk0: p1 p2 [ 1.542325] imx-gpc 20dc000.gpc: failed to get pu regulator: -517 [ 1.550827] /soc/aips-bus@02100000/usdhc@02190000: voltage-ranges unspecified [ 1.558015] sdhci-esdhc-imx 2190000.usdhc: could not get ultra high speed state, work on normal mode
[PYBOOT] [hummingboard 02:13]: Timed out waiting for "<type 'str'>":
[PYBOOT] [hummingboard 02:14]: got exception: timeout ~$off
[PYBOOT] [hummingboard 02:15]: Done.
========================================================================
Board hummingboard-arm-multi_v7_nosmp_defconfig failure log: -------------------------------------------------
[ 1.252548] /soc/aips-bus@02100000/usdhc@02190000: voltage-ranges unspecified [ 1.259714] sdhci-esdhc-imx 2190000.usdhc: could not get ultra high speed state, work on normal mode [ 1.269399] /soc/aips-bus@02100000/usdhc@02194000: voltage-ranges unspecified [ 1.276563] sdhci-esdhc-imx 2194000.usdhc: could not get ultra high speed state, work on normal mode [ 1.285728] sdhci-esdhc-imx 2194000.usdhc: Got CD GPIO [ 1.291588] sdhci-esdhc-imx 2194000.usdhc: No vqmmc regulator found [ 1.331717] mmc0: SDHCI controller on 2194000.usdhc [2194000.usdhc] using ADMA [ 1.340884] ledtrig-cpu: registered to indicate activity on CPUs [ 1.347131] usbcore: registered new interface driver usbhid [ 1.352724] usbhid: USB HID core driver [ 1.360538] NET: Registered protocol family 10 [ 1.367951] sit: IPv6 over IPv4 tunneling driver [ 1.373108] NET: Registered protocol family 17 [ 1.377597] can: controller area network core (rev 20120528 abi 9) [ 1.383845] NET: Registered protocol family 29 [ 1.388316] can: raw protocol (rev 20120528) [ 1.392607] can: broadcast manager protocol (rev 20120528 t) [ 1.398291] can: netlink gateway (rev 20130117) max_hops=1 [ 1.404213] Key type dns_resolver registered [ 1.408656] ThumbEE CPU extension supported. [ 1.421494] imx-gpc 20dc000.gpc: failed to get pu regulator: -517 [ 1.429572] /soc/aips-bus@02100000/usdhc@02190000: voltage-ranges unspecified [ 1.436766] sdhci-esdhc-imx 2190000.usdhc: could not get ultra high speed state, work on normal mode [ 1.448667] hctosys: unable to open rtc device (rtc0) [ 1.459373] brcm_reg: disabling [ 1.463339] Waiting for root device /dev/mmcblk1p2... [ 1.504145] mmc0: host does not support reading read-only switch, assuming write-enable [ 1.518160] mmc0: new high speed SDHC card at address b368 [ 1.524033] mmcblk0: mmc0:b368 00000 7.51 GiB [ 1.529832] mmcblk0: p1 p2 [ 1.533427] imx-gpc 20dc000.gpc: failed to get pu regulator: -517 [ 1.541536] /soc/aips-bus@02100000/usdhc@02190000: voltage-ranges unspecified [ 1.548718] sdhci-esdhc-imx 2190000.usdhc: could not get ultra high speed state, work on normal mode
[PYBOOT] [hummingboard 01:42]: Timed out waiting for "<type 'str'>":
[PYBOOT] [hummingboard 01:43]: got exception: timeout ~$off
[PYBOOT] [hummingboard 01:44]: Done.
========================================================================
Board odroidu3-arm-exynos_defconfig failure log: -------------------------------------------------
[ 1.937273] usbhid: USB HID core driver [ 1.944919] NET: Registered protocol family 10 [ 1.946019] sit: IPv6 over IPv4 tunneling driver [ 1.950568] NET: Registered protocol family 17 [ 1.954552] NET: Registered protocol family 15 [ 1.959077] Registering SWP/SWPB emulation handler [ 1.964800] s3c-rtc 10070000.rtc: rtc disabled, re-enabling [ 1.969356] s3c-rtc 10070000.rtc: warning: invalid RTC value so initializing it [ 1.974382] mmc1: MAN_BKOPS_EN bit is not set [ 1.975627] mmc_host mmc1: Bus speed (slot 0) = 44000000Hz (slot req 52000000Hz, actual 44000000HZ div = 0) [ 1.975836] mmc_host mmc1: Bus speed (slot 0) = 73333333Hz (slot req 52000000Hz, actual 36666666HZ div = 1) [ 1.976099] mmc1: new DDR MMC card at address 0001 [ 1.976672] mmcblk0: mmc1:0001 008G92 7.28 GiB [ 1.976943] mmcblk0boot0: mmc1:0001 008G92 partition 1 4.00 MiB [ 1.977119] mmcblk0boot1: mmc1:0001 008G92 partition 2 4.00 MiB [ 1.977295] mmcblk0rpmb: mmc1:0001 008G92 partition 3 512 KiB [ 1.992747] mmcblk0: p1 p2 [ 2.022238] usb 1-3: New USB device found, idVendor=0424, idProduct=3503 [ 2.022246] usb 1-3: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 2.022915] hub 1-3:1.0: USB hub found [ 2.023107] hub 1-3:1.0: 3 ports detected [ 2.051681] s3c-rtc 10070000.rtc: rtc core: registered s3c as rtc1 [ 2.082460] max98090 1-0010: MAX98090 REVID=0x43 [ 2.084898] max98090 1-0010: use default 2.8v micbias [ 2.093598] asoc-simple-card sound: HiFi <-> 3830000.i2s mapping ok [ 2.097523] input: gpio_keys as /devices/platform/gpio_keys/input/input0 [ 2.122364] max77686-rtc max77686-rtc: setting system clock to 2000-01-01 01:00:20 UTC (946688420) [ 2.139933] VDD10_HDMI_1.0V: disabling [ 2.140643] vdd_g3d: disabling [ 2.141712] BUCK8_2.8V: disabling [ 2.145715] ALSA device list: [ 2.147339] #0: Odroid-U3 [ 2.150932] Waiting for root device /dev/mmcblk1p2...
[PYBOOT] [odroidu3 01:49]: Timed out waiting for "<type 'str'>":
[PYBOOT] [odroidu3 01:50]: got exception: timeout ~$off
[PYBOOT] [odroidu3 01:51]: Done.
========================================================================
Board odroidu3-arm-multi_v7_defconfig failure log: -------------------------------------------------
[ 1.390229] dwmmc_exynos 12550000.mmc: No vqmmc regulator found [ 1.396134] dwmmc_exynos 12550000.mmc: allocated mmc-pwrseq [ 1.429341] dwmmc_exynos 12550000.mmc: 1 slots initialized [ 1.429864] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.436075] ledtrig-cpu: registered to indicate activity on CPUs [ 1.440925] usbcore: registered new interface driver usbhid [ 1.446360] usbhid: USB HID core driver [ 1.452859] NET: Registered protocol family 10 [ 1.455049] sit: IPv6 over IPv4 tunneling driver [ 1.459536] NET: Registered protocol family 17 [ 1.463618] can: controller area network core (rev 20120528 abi 9) [ 1.469810] NET: Registered protocol family 29 [ 1.474189] can: raw protocol (rev 20120528) [ 1.478452] can: broadcast manager protocol (rev 20120528 t) [ 1.484092] can: netlink gateway (rev 20130117) max_hops=1 [ 1.489800] Key type dns_resolver registered [ 1.493923] ThumbEE CPU extension supported. [ 1.498061] Registering SWP/SWPB emulation handler [ 1.505510] input: gpio_keys as /devices/platform/gpio_keys/input/input0 [ 1.534846] max77686-rtc max77686-rtc: setting system clock to 2000-01-01 01:00:20 UTC (946688420) [ 1.536892] mmc1: MAN_BKOPS_EN bit is not set [ 1.538131] mmc_host mmc1: Bus speed (slot 0) = 44000000Hz (slot req 52000000Hz, actual 44000000HZ div = 0) [ 1.538317] mmc_host mmc1: Bus speed (slot 0) = 73333333Hz (slot req 52000000Hz, actual 36666666HZ div = 1) [ 1.538598] mmc1: new DDR MMC card at address 0001 [ 1.576067] mmcblk0: mmc1:0001 008G92 7.28 GiB [ 1.576070] VDD10_HDMI_1.0V: disabling [ 1.576705] vdd_g3d: disabling [ 1.577323] BUCK8_2.8V: disabling [ 1.585226] mmcblk0boot0: mmc1:0001 008G92 partition 1 4.00 MiB [ 1.591086] mmcblk0boot1: mmc1:0001 008G92 partition 2 4.00 MiB [ 1.596968] mmcblk0rpmb: mmc1:0001 008G92 partition 3 512 KiB [ 1.603411] mmcblk0: p1 p2 [ 1.607779] Waiting for root device /dev/mmcblk1p2...
[PYBOOT] [odroidu3 02:16]: Timed out waiting for "<type 'str'>":
[PYBOOT] [odroidu3 02:17]: got exception: timeout ~$off
[PYBOOT] [odroidu3 02:18]: Done.
========================================================================
Board seaboard-arm-multi_v7_nosmp_defconfig failure log: -------------------------------------------------
[ 1.644916] vdd_ldo8,avdd_hdmi_pll: supplied by vdd_sm2,vin_ldo* [ 1.651296] vdd_ldo7,avdd_hdmi,vdd_fuse: supplied by vdd_sm2,vin_ldo* [ 1.661617] utmi_phy_clk_enable: timeout waiting for phy to stabilize [ 1.668082] tegra-ehci c5000000.usb: EHCI Host Controller [ 1.673494] tegra-ehci c5000000.usb: new USB bus registered, assigned bus number 3 [ 1.681233] tegra-ehci c5000000.usb: irq 287, io mem 0xc5000000 [ 1.693548] tegra-ehci c5000000.usb: USB 2.0 started, EHCI 1.00 [ 1.700093] hub 3-0:1.0: USB hub found [ 1.703888] hub 3-0:1.0: 1 port detected [ 1.711186] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 1.717798] [drm] No driver support for vblank timestamp query. [ 1.724623] mmc2: switch to bus width 2 failed [ 1.750682] mmc2: switch to bus width 1 failed [ 1.755137] mmc2: new high speed MMC card at address 0001 [ 1.768705] mmcblk0: mmc2:0001 MMC08G 7.46 GiB [ 1.768814] mmcblk0boot0: mmc2:0001 MMC08G partition 1 512 KiB [ 1.768953] mmcblk0boot1: mmc2:0001 MMC08G partition 2 512 KiB [ 1.770029] mmcblk0: p3 [ 1.822529] Console: switching to colour frame buffer device 170x48 [ 1.860145] drm drm: fb0: frame buffer device [ 1.864608] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 1.871040] input: gpio-keys as /devices/soc0/gpio-keys/input/input2 [ 1.877929] tps6586x-rtc tps6586x-rtc: setting system clock to 2009-01-01 00:00:00 UTC (1230768000) [ 1.889899] vdd_1v5: disabling [ 1.892960] vdd_1v2: disabling [ 1.905597] mmc0: queuing unknown CIS tuple 0x80 (50 bytes) [ 1.919064] mmc0: queuing unknown CIS tuple 0x80 (7 bytes) [ 1.927384] mmc0: queuing unknown CIS tuple 0x80 (7 bytes) [ 1.940120] mmc0: queuing unknown CIS tuple 0x80 (19 bytes) [ 1.964791] mmc0: queuing unknown CIS tuple 0x02 (1 bytes) [ 1.973696] mmc0: new SDIO card at address 0001 [ 2.504376] asix 2-1:1.0 eth0: register 'asix' at usb-c5008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, c0:c1:c0:13:08:60 [ 2.515650] Waiting for root device /dev/mmcblk2p3...
[PYBOOT] [seaboard 01:53]: Timed out waiting for "<type 'str'>":
[PYBOOT] [seaboard 01:54]: got exception: timeout ~$off
[PYBOOT] [seaboard 01:55]: Done.
========================================================================
Board seaboard-arm-tegra_defconfig failure log: -------------------------------------------------
[ 1.793479] Bluetooth: RFCOMM ver 1.11 [ 1.797259] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 1.802748] Bluetooth: BNEP socket layer initialized [ 1.807721] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 1.813693] Bluetooth: HIDP socket layer initialized [ 1.819417] Key type dns_resolver registered [ 1.825100] Registering SWP/SWPB emulation handler [ 1.852550] tegra-dc 54200000.dc: failed to probe RGB output: -517 [ 1.859485] VDDIO_HDMI: supplied by vdd_5v0 [ 1.864002] vdd_sys: supplied by vdd_5v0 [ 1.868054] vdd_sm2,vin_ldo*: supplied by vdd_sys [ 1.873107] vdd_ldo8,avdd_hdmi_pll: supplied by vdd_sm2,vin_ldo* [ 1.879837] vdd_ldo7,avdd_hdmi,vdd_fuse: supplied by vdd_sm2,vin_ldo* [ 1.891323] utmi_phy_clk_enable: timeout waiting for phy to stabilize [ 1.897793] tegra-ehci c5000000.usb: EHCI Host Controller [ 1.903291] tegra-ehci c5000000.usb: new USB bus registered, assigned bus number 3 [ 1.911478] tegra-ehci c5000000.usb: irq 287, io mem 0xc5000000 [ 1.929196] tegra-ehci c5000000.usb: USB 2.0 started, EHCI 1.00 [ 1.938611] hub 3-0:1.0: USB hub found [ 1.942483] hub 3-0:1.0: 1 port detected [ 1.955554] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 1.962196] [drm] No driver support for vblank timestamp query. [ 2.053655] Console: switching to colour frame buffer device 170x48 [ 2.076773] drm drm: fb0: frame buffer device [ 2.109161] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 2.116587] input: gpio-keys as /devices/soc0/gpio-keys/input/input4 [ 2.124426] tps6586x-rtc tps6586x-rtc: setting system clock to 2009-01-01 00:00:00 UTC (1230768000) [ 2.145787] vdd_1v5: disabling [ 2.148856] vdd_1v2: disabling [ 2.152091] ALSA device list: [ 2.155054] #0: NVIDIA Tegra Seaboard [ 2.370407] asix 2-1:1.0 eth0: register 'asix' at usb-c5008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, c0:c1:c0:13:08:60 [ 2.381806] Waiting for root device /dev/mmcblk2p3...
[PYBOOT] [seaboard 01:48]: Timed out waiting for "<type 'str'>":
[PYBOOT] [seaboard 01:49]: got exception: timeout ~$off
[PYBOOT] [seaboard 01:50]: Done.
========================================================================
Board snow-arm-multi_v7_nosmp_defconfig failure log: -------------------------------------------------
[....] CPUFreq Utilities: Setting ondemand CPUFreq governor...CPU0...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [....] Starting OpenBSD Secure Shell server: sshd[ 5.405105] random: sshd: uninitialized urandom read (32 bytes read, 92 bits of entropy available) [?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0c.
Debian GNU/Linux 7.0 snow ttySAC3
snow login: root root[ 6.705087] Unable to handle kernel paging request at virtual address c0f26e50 [ 6.705096] pgd = c0204000 [ 6.705115] [c0f26e50] *pgd=40e0040e(bad) [ 6.705134] Internal error: Oops: 8000000d [#1] ARM [ 6.705147] Modules linked in: [ 6.705169] CPU: 0 PID: 0 Comm: swapper Tainted: G W 4.4.31-rc1-00035-gf821e08 #1 [ 6.705178] Hardware name: SAMSUNG EXYNOS (Flattened Device Tree) [ 6.705191] task: c0e7c070 ti: c0e76000 task.ti: c0e76000 [ 6.705205] PC is at 0xc0f26e50 [ 6.705234] LR is at reset_ctrl_regs+0x94/0x258 [ 6.705254] pc : [<c0f26e50>] lr : [<c0218048>] psr: 600001d3 [ 6.705254] sp : c0e77f88 ip : 00000000 fp : 00000000 [ 6.705265] r10: 00000000 r9 : 00000001 r8 : 8d462849 [ 6.705277] r7 : 00000001 r6 : c0f27abc r5 : c0f27a7c r4 : c0e7812c [ 6.705288] r3 : 02008002 r2 : 00000000 r1 : 00000000 r0 : 00000001 [ 6.705304] Flags: nZCv IRQs off FIQs off Mode SVC_32 ISA ARM Segment none [ 6.705319] Control: 10c53c7d Table: 6d448059 DAC: 00000051 [ 6.705331] Process swapper (pid: 0, stack limit = 0xc0e76218) [ 6.705342] Stack: (0xc0e77f88 to 0xc0e78000) [ 6.705369] 7f80: c0f6a4d9 c0e78134 c0f26e58 c0f27a1c c0e77fac c0993c88 [ 6.705399] 7fa0: c0e76000 c0e7812c c0e77fb4 c0993e8c 00000000 c0262604 ffffffff c0d88c58 [ 6.705427] 7fc0: ffffffff ffffffff 00000000 c0d88678 00000000 c0e11a20 c0f6d1d4 c0e780b4 [ 6.705456] 7fe0: c0e11a1c c0e7d204 40204059 410fc0f4 00000000 40208078 00000000 00000000 [ 6.705509] [<c0218048>] (reset_ctrl_regs) from [<c0993c88>] (schedule+0x44/0x9c) [ 6.705543] Code: c0f26e3c c0f26f88 c0f26f88 00000000 (c0f26e58) [ 6.705559] ---[ end trace cb88537fdc8fa202 ]--- [ 6.705571] Kernel panic - not syncing: Attempted to kill the idle task! [ 6.863938] ---[ end Kernel panic - not syncing: Attempted to kill the idle task!
[PYBOOT] [snow 00:49]: got exception: panic ~$off
[PYBOOT] [snow 00:50]: Done.
========================================================================
Board snowball-arm-multi_v7_defconfig failure log: -------------------------------------------------
[ 1.938507] ledtrig-cpu: registered to indicate activity on CPUs [ 1.944763] usbcore: registered new interface driver usbhid [ 1.950317] usbhid: USB HID core driver [ 1.958160] NET: Registered protocol family 10 [ 1.963592] sit: IPv6 over IPv4 tunneling driver [ 1.968811] NET: Registered protocol family 17 [ 1.973297] can: controller area network core (rev 20120528 abi 9) [ 1.979553] NET: Registered protocol family 29 [ 1.984008] can: raw protocol (rev 20120528) [ 1.988281] can: broadcast manager protocol (rev 20120528 t) [ 1.993957] can: netlink gateway (rev 20130117) max_hops=1 [ 1.999938] Key type dns_resolver registered [ 2.004394] ThumbEE CPU extension supported. [ 2.008697] Registering SWP/SWPB emulation handler [ 2.015991] input: gpio_keys as /devices/soc0/gpio_keys/input/input0 [ 2.022735] rtc-pl031 80154000.rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800) [ 2.031921] thermal cooling_device0: thermal-cpufreq-0 bind to 0: 0-succeed [ 2.038940] thermal cooling_device0: thermal-cpufreq-0 bind to 1: 0-succeed [ 2.045928] thermal cooling_device0: thermal-cpufreq-0 bind to 2: 0-succeed [ 2.052917] db8500-cpufreq-cooling soc:cpufreq-cooling: Cooling device registered: thermal-cpufreq-0 [ 2.066436] db8500-esram12: disabling [ 2.070220] db8500-esram34: disabling [ 2.074188] V-CSI/DSI: disabling [ 2.077453] mmci-reg: disabling [ 2.081115] uart-pl011 80007000.uart: DMA channel TX dma0chan20 [ 2.087097] uart-pl011 80007000.uart: DMA channel RX dma0chan21 [ 2.093353] Waiting for root device /dev/mmcblk3p4... Connected. cu: Got hangup signal cu: waitpid: No child processes Connected.
Disconnected.
[PYBOOT] [snowball 03:13]: Timed out waiting for "<type 'str'>":
[PYBOOT] [snowball 03:14]: got exception: timeout ~$off
[PYBOOT] [snowball 03:16]: Done.
========================================================================
Board snowball-arm-multi_v7_nosmp_defconfig failure log: -------------------------------------------------
[ 1.895874] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.903808] ledtrig-cpu: registered to indicate activity on CPUs [ 1.910095] usbcore: registered new interface driver usbhid [ 1.915649] usbhid: USB HID core driver [ 1.923492] NET: Registered protocol family 10 [ 1.982177] sit: IPv6 over IPv4 tunneling driver [ 1.987304] NET: Registered protocol family 17 [ 1.991790] can: controller area network core (rev 20120528 abi 9) [ 1.998016] NET: Registered protocol family 29 [ 2.002471] can: raw protocol (rev 20120528) [ 2.006744] can: broadcast manager protocol (rev 20120528 t) [ 2.012420] can: netlink gateway (rev 20130117) max_hops=1 [ 2.018341] Key type dns_resolver registered [ 2.022796] ThumbEE CPU extension supported. [ 2.078277] input: gpio_keys as /devices/soc0/gpio_keys/input/input0 [ 2.091979] rtc-pl031 80154000.rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800) [ 2.101074] thermal cooling_device0: thermal-cpufreq-0 bind to 0: 0-succeed [ 2.108062] thermal cooling_device0: thermal-cpufreq-0 bind to 1: 0-succeed [ 2.115051] thermal cooling_device0: thermal-cpufreq-0 bind to 2: 0-succeed [ 2.122039] db8500-cpufreq-cooling soc:cpufreq-cooling: Cooling device registered: thermal-cpufreq-0 [ 2.134002] db8500-esram12: disabling [ 2.181823] db8500-esram34: disabling [ 2.207580] V-CSI/DSI: disabling [ 2.211791] mmci-reg: disabling [ 2.215393] uart-pl011 80007000.uart: DMA channel TX dma0chan20 [ 2.221374] uart-pl011 80007000.uart: DMA channel RX dma0chan21 [ 2.242553] Waiting for root device /dev/mmcblk3p4... [ 4.115539] mmc3: new high speed MMC card at address 0001 [ 4.121734] mmcblk0: mmc3:0001 3.53 GiB [ 4.125976] mmcblk0boot0: mmc3:0001 partition 1 2.00 MiB [ 4.131652] mmcblk0boot1: mmc3:0001 partition 2 2.00 MiB [ 4.137298] mmcblk0rpmb: mmc3:0001 partition 3 128 KiB [ 4.143829] mmcblk0: p1 p2 p3 p4
[PYBOOT] [snowball 02:05]: Timed out waiting for "<type 'str'>":
[PYBOOT] [snowball 02:06]: got exception: timeout ~$off
[PYBOOT] [snowball 02:07]: Done.
========================================================================
Board snowball-arm-u8500_defconfig failure log: -------------------------------------------------
[ 2.570098] coresight-etm3x 801ae000.ptm: PTM 1.0 initialized [ 2.576293] coresight-etm3x 801af000.ptm: PTM 1.0 initialized [ 2.588958] ux500-msp-i2s ux500-msp-i2s.1: Failed to get DMA channel capabilities, falling back to period counting: -6 [ 2.599670] snd-soc-mop500 snd-soc-mop500.0: ab8500-codec-dai.0 <-> ux500-msp-i2s.1 mapping ok [ 2.609588] ux500-msp-i2s ux500-msp-i2s.3: Failed to get DMA channel capabilities, falling back to period counting: -6 [ 2.620300] snd-soc-mop500 snd-soc-mop500.0: ab8500-codec-dai.1 <-> ux500-msp-i2s.3 mapping ok [ 2.644592] NET: Registered protocol family 10 [ 2.649963] sit: IPv6 over IPv4 tunneling driver [ 2.655548] NET: Registered protocol family 17 [ 2.660003] NET: Registered protocol family 35 [ 2.664611] NET: Registered protocol family 37 [ 2.669128] Registering SWP/SWPB emulation handler [ 2.675903] input: gpio_keys as /devices/soc0/gpio_keys/input/input1 [ 2.688079] ab8500-rtc ab8500-rtc.0: setting system clock to 2000-02-05 22:46:53 UTC (949790813) [ 2.697387] thermal cooling_device0: thermal-cpufreq-0 bind to 0: 0-succeed [ 2.704437] thermal cooling_device0: thermal-cpufreq-0 bind to 1: 0-succeed [ 2.711456] thermal cooling_device0: thermal-cpufreq-0 bind to 2: 0-succeed [ 2.718444] db8500-cpufreq-cooling soc:cpufreq-cooling: Cooling device registered: thermal-cpufreq-0 [ 2.732391] db8500-esram12: disabling [ 2.736114] db8500-esram34: disabling [ 2.740020] V-CSI/DSI: disabling [ 2.743347] mmci-reg: disabling [ 2.746643] ALSA device list: [ 2.749603] #0: MOP500-card [ 2.752960] uart-pl011 80007000.uart: DMA channel TX dma0chan24 [ 2.758911] uart-pl011 80007000.uart: DMA channel RX dma0chan25 [ 2.765106] Waiting for root device /dev/mmcblk3p4... cu: Got hangup signal Connected. cu: waitpid: No child processes Connected.
Disconnected.
[PYBOOT] [snowball 01:59]: Timed out waiting for "<type 'str'>":
[PYBOOT] [snowball 02:00]: got exception: timeout ~$off
[PYBOOT] [snowball 02:02]: Done.
========================================================================
Board wandboard-arm-imx_v6_v7_defconfig failure log: -------------------------------------------------
INIT: Id "1" respawning too fas[ 20.018788] mmcblk0: error -110 sending status command, retrying t: disabled for 5 minutes [ 20.027638] mmcblk0: error -110 sending status command, aborting [ 20.038817] mmcblk0: error -110 sending status command, retrying [ 20.047327] mmcblk0: error -110 sending status command, retrying [ 20.055737] mmcblk0: error -110 sending status command, aborting [ 20.066753] mmcblk0: error -110 sending status command, retrying [ 20.075189] mmcblk0: error -110 sending status command, retrying [ 20.083668] mmcblk0: error -110 sending status command, aborting INIT: cannot execute "/sbin/getty" INIT: cannot execute "/sbin/gett[ 20.097809] mmcblk0: error -110 sending status command, retrying y" INIT: Id "S1" respawning too fa[ 20.106687] mmcblk0: error -110 sending status command, retrying st: disabled for 5 minutes [ 20.115894] mmcblk0: error -110 sending status command, aborting INIT: INIT: INIT: cannot execute "/sbin/getty" cannot execute "/sbin/getty"[ 20.129686] mmcblk0: error -110 sending status command, retrying
INIT: Id "4" respawning too fast: disab[ 20.138937] mmcblk0: error -110 sending status command, retrying led for 5 minutes INIT: Id "5" respawning too fast[ 20.150245] mmcblk0: error -110 sending status command, aborting : disabled for 5 minutes INIT: cannot execute "/sbin/gett[ 20.164310] mmcblk0: error -110 sending status command, retrying y" INIT: Id "6" respawning too fas[ 20.173110] mmcblk0: error -110 sending status command, retrying t: disabled for 5 minutes [ 20.182364] mmcblk0: error -110 sending status command, aborting INIT: cannot execute "/sbin/getty" INIT: Id "2" respawning too fast: disabled for 5 minutes INIT: no more processes left in this runlevel [ 141.294285] random: nonblocking pool is initialized
[PYBOOT] [wandboard 02:55]: Timed out waiting for "<type 'str'>":
[PYBOOT] [wandboard 02:56]: got exception: timeout ~$off
[PYBOOT] [wandboard 02:57]: Done.