Tree/Branch: mainline Git describe: v3.15-11906-g6d87c22 Failed boot tests (console logs at the end) =========================================== exynos5420-arndale-octa: FAIL: arm-multi_v7_defconfig ste-snowball: FAIL: arm-u8500_defconfig
Full Report ===========
arm-davinci_all_defconfig ------------------------- legacy,dm365evm 0 min 17.3 sec: PASS da850-evm 0 min 15.0 sec: PASS
arm-tegra_defconfig ------------------- tegra124-jetson-tk1 0 min 17.5 sec: PASS tegra30-beaver 0 min 24.1 sec: PASS
arm-multi_v7_defconfig+CONFIG_ARM_LPAE=y ---------------------------------------- tegra124-jetson-tk1 0 min 17.5 sec: PASS armada-xp-openblocks-ax3-4 0 min 23.9 sec: PASS omap5-uevm 1 min 36.2 sec: PASS (Warnings: 1) sun7i-a20-cubieboard2 0 min 13.0 sec: PASS
arm-mvebu_v7_defconfig+CONFIG_CPU_BIG_ENDIAN=y ---------------------------------------------- armada-xp-openblocks-ax3-4 0 min 23.6 sec: PASS armada-370-mirabox 0 min 20.6 sec: PASS
arm-omap2plus_defconfig ----------------------- legacy,3730xm 0 min 41.3 sec: PASS am335x-boneblack 0 min 22.2 sec: PASS omap3-beagle-xm 0 min 49.5 sec: PASS legacy,3530beagle 0 min 44.8 sec: PASS (Warnings: 1) omap4-panda 0 min 51.6 sec: PASS (Warnings: 1) omap3-overo-tobi 0 min 22.9 sec: PASS am335x-bone 0 min 33.9 sec: PASS omap3-overo-storm-tobi 0 min 24.7 sec: PASS omap5-uevm 0 min 54.1 sec: PASS (Warnings: 1) omap3-n900 0 min 17.6 sec: PASS legacy,n900 0 min 17.1 sec: PASS (Warnings: 1) omap4-panda-es 0 min 50.0 sec: PASS (Warnings: 1) legacy,3730storm 0 min 22.9 sec: PASS legacy,3530overo 0 min 20.6 sec: PASS (Warnings: 1)
arm-multi_v7_defconfig ---------------------- imx6dl-wandboard,wand-solo 0 min 15.1 sec: PASS am335x-boneblack 0 min 22.0 sec: PASS sun7i-a20-cubieboard2 0 min 15.8 sec: PASS sun4i-a10-cubieboard 0 min 15.5 sec: PASS exynos5410-smdk5410 0 min 30.9 sec: PASS am335x-bone 0 min 28.7 sec: PASS tegra124-jetson-tk1 0 min 17.5 sec: PASS armada-370-mirabox 0 min 21.7 sec: PASS omap4-panda 0 min 53.9 sec: PASS (Warnings: 1) imx6q-wandboard 0 min 13.9 sec: PASS imx6dl-wandboard,wand-dual 0 min 15.2 sec: PASS ste-snowball 1 min 14.3 sec: PASS tegra30-beaver 0 min 21.0 sec: PASS omap3-n900 0 min 15.1 sec: PASS qcom-apq8074-dragonboard 0 min 19.2 sec: PASS bcm28155-ap 0 min 26.4 sec: PASS omap3-overo-tobi 0 min 22.0 sec: PASS omap3-overo-storm-tobi 0 min 24.2 sec: PASS omap3-beagle-xm 0 min 48.6 sec: PASS exynos5420-arndale-octa 0 min 48.1 sec: FAIL armada-xp-openblocks-ax3-4 0 min 25.0 sec: PASS omap5-uevm 1 min 38.3 sec: PASS (Warnings: 1) omap4-panda-es 0 min 52.6 sec: PASS (Warnings: 1) exynos5250-arndale 0 min 30.7 sec: PASS
arm-sunxi_defconfig ------------------- sun7i-a20-cubieboard2 0 min 11.7 sec: PASS sun4i-a10-cubieboard 0 min 11.5 sec: PASS
arm-qcom_defconfig ------------------ qcom-apq8074-dragonboard 0 min 17.9 sec: PASS
arm-bcm_defconfig ----------------- bcm28155-ap 0 min 22.5 sec: PASS
arm-exynos_defconfig -------------------- exynos5420-arndale-octa 0 min 39.9 sec: PASS exynos5250-arndale 0 min 30.2 sec: PASS exynos5410-smdk5410 0 min 27.4 sec: PASS
arm-imx_v6_v7_defconfig ----------------------- imx6dl-wandboard,wand-dual 0 min 15.5 sec: PASS imx6dl-wandboard,wand-solo 0 min 16.0 sec: PASS imx6q-wandboard 0 min 14.1 sec: PASS
arm-u8500_defconfig ------------------- ste-snowball 1 min 50.5 sec: FAIL
arm-multi_v7_defconfig+CONFIG_CPU_BIG_ENDIAN=y ---------------------------------------------- armada-xp-openblocks-ax3-4 0 min 26.4 sec: PASS armada-370-mirabox 0 min 22.2 sec: PASS
arm-mvebu_v7_defconfig ---------------------- armada-xp-openblocks-ax3-4 0 min 22.5 sec: PASS armada-370-mirabox 0 min 20.0 sec: PASS
arm-sama5_defconfig ------------------- sama5d35ek 0 min 15.4 sec: PASS (Warnings: 1)
Console logs for failures =========================
arm-multi_v7_defconfig ----------------------
exynos5420-arndale-octa: FAIL: last 40 lines of boot log: ---------------------------------------------------------
[ 16.038749] PVDD_G3D_1V0: disabling [ 16.043179] mmc_host mmc0: Bus speed (slot 0) = 100000000Hz (slot req 52000000Hz, actual 50000000HZ div = 1) [ 16.052278] mmc0: new DDR MMC card at address 0001 [ 16.057431] mmcblk0: mmc0:0001 M4G1FB 3.64 GiB [ 16.061589] mmcblk0boot0: mmc0:0001 M4G1FB partition 1 1.00 MiB [ 16.067494] mmcblk0boot1: mmc0:0001 M4G1FB partition 2 1.00 MiB [ 16.073360] mmcblk0rpmb: mmc0:0001 M4G1FB partition 3 128 KiB [ 16.080047] PVDD_G3DS_1V0: disabling [ 16.082794] mmcblk0: p1 p2 p3 p4 [ 16.085579] Unhandled fault: external abort on non-linefetch (0x008) at 0xf003b088 [ 16.093070] Internal error: : 8 [#2] SMP ARM [ 16.097313] Modules linked in: [ 16.100351] CPU: 0 PID: 65 Comm: kworker/u16:1 Tainted: G D 3.15.0-11906-g6d87c22 #1 [ 16.109022] Workqueue: kmmcd mmc_rescan [ 16.112825] task: e922b600 ti: e9546000 task.ti: e9546000 [ 16.118203] PC is at rescan_partitions+0xb4/0x290 [ 16.122877] LR is at 0xf003b000 [ 16.125998] pc : [<c0401ae4>] lr : [<f003b000>] psr: 20000113 [ 16.125998] sp : e9547c98 ip : 00000000 fp : 00000000 [ 16.137434] r10: 00000000 r9 : e95773c0 r8 : e9585c00 [ 16.142634] r7 : 00000000 r6 : e8824200 r5 : 00000000 r4 : 00000010 [ 16.149132] r3 : 00000013 r2 : 00000000 r1 : 00000000 r0 : 00000001 [ 16.155633] Flags: nzCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment kernel [ 16.162912] Control: 10c5387d Table: 2020406a DAC: 00000015 [ 16.168630] Process kworker/u16:1 (pid: 65, stack limit = 0xe9546250) [ 16.175042] Stack: (0xe9547c98 to 0xe9548000) [ 16.179377] 7c80: 00000000 c03fe838 [ 16.187524] 7ca0: c03fe860 e9574f80 e9016400 c03fe86c c03fe860 c0527558 00000000 00000003 [ 16.195668] 7cc0: e9585c70 e8824200 00000000 e8824200 00000000 00000000 00000000 e8824200 [ 16.203814] 7ce0: e9585c00 e8824210 00000001 00000000 00000000 c031cec8 00000000 00000000 [ 16.211959] 7d00: 00000001 00000001 e8824200 e8824200 00000000 e9585c0c 00000000 e951a280 [ 16.220105] 7d20: 00000003 c031d154 e88242fc 00000001 e8824200 c0304bf0 e8824290 c031be40 [ 16.228250] 7d40: e9547d4c e9585c40 00000000 00000001 e8824200 e9585c00 e9585c70 e9585c0c [ 16.236396] 7d60: 00000000 e951a280 00000003 c03ff9d8 c03fe860 e9585c00 00000080 0b300000 [ 16.244542] 7d80: 00000002 e95c0400 e9584c00 e9585800 e9585800 e9585a8c e95c0400 e9584c00 [ 16.252687] 7da0: e9585800 e9584dc8 e9547dee c06b0674 00000056 e9584c6c 00000003 e95c0400 [ 16.260833] 7dc0: e9584c00 c06b1310~$off # PYBOOT: Exception: kernel: ERROR: failed to boot: Unhandled fault # PYBOOT: Time: 48.12 seconds. # PYBOOT: Result: FAIL
arm-u8500_defconfig -------------------
ste-snowball: FAIL: last 40 lines of boot log: ----------------------------------------------
[ 3.493591] musb-hdrc musb-hdrc.20.auto: musb_init_controller failed with status -517 [ 3.501464] platform musb-hdrc.20.auto: Driver musb-hdrc requests probe deferral [ 3.509368] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.20.auto [ 3.521301] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.20.auto) status -22 [ 3.528594] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.540100] musb-ux500 musb-hdrc.20.auto: Error applying setting, reverse things back [ 3.548645] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.21.auto [ 3.560577] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.21.auto) status -22 [ 3.567871] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.579376] musb-hdrc musb-hdrc.21.auto: Error applying setting, reverse things back [ 3.587188] HS USB OTG: no transceiver configured [ 3.591918] musb-hdrc musb-hdrc.21.auto: musb_init_controller failed with status -517 [ 3.599731] platform musb-hdrc.21.auto: Driver musb-hdrc requests probe deferral [ 3.607666] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.21.auto [ 3.619598] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.21.auto) status -22 [ 3.626922] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.638397] musb-ux500 musb-hdrc.21.auto: Error applying setting, reverse things back [ 3.646911] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.22.auto [ 3.658843] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.22.auto) status -22 [ 3.666168] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.677642] musb-hdrc musb-hdrc.22.auto: Error applying setting, reverse things back [ 3.685485] HS USB OTG: no transceiver configured [ 3.690185] musb-hdrc musb-hdrc.22.auto: musb_init_controller failed with status -517 [ 3.698028] platform musb-hdrc.22.auto: Driver musb-hdrc requests probe deferral [ 3.705963] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.22.auto [ 3.717864] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.22.auto) status -22 [ 3.725189] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.736694] musb-ux500 musb-hdrc.22.auto: Error applying setting, reverse things back [ 3.745208] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.23.auto [ 3.757141] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.23.auto) status -22 [ 3.764465] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.775939] musb-hdrc musb-hdrc.23.auto: Error applying setting, reverse things back [ 3.783752] HS USB OTG: no transceiver configured [ 3.788452] musb-hdrc musb-hdrc.23.auto: musb_init_controller failed with status -517 [ 3.796295] platform musb-hdrc.23.auto: Driver musb-hdrc requests probe deferral [ 3.804229] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.23.auto ~$off # PYBOOT: Exception: kernel: ERROR: failed to boot: <class 'pexpect.TIMEOUT'> # PYBOOT: Time: 110.55 seconds. # PYBOOT: Result: FAIL