Full logs are available at http://arm-soc.lixom.net/bootlogs/mainline/v4.6-rc7-96-g685764b/
Failed boards:
arndale multi_v7_nosmp_defconfig : NO BUILD bbb arm-omap2plus_defconfig : FAILED 1:55.69 bbb arm-multi_v7_defconfig : FAILED 1:57.55 bbb multi_v7_nosmp_defconfig : NO BUILD beagleboard-x15 arm-omap2plus_defconfig : FAILED 1:44.05 beagleboard-x15 arm-multi_v7_defconfig : FAILED 1:43.61 beagleboard-x15 arm-multi_lpae_defconfig : FAILED 1:53.48 beagleboard-x15 multi_v7_nosmp_defconfig : NO BUILD beaver multi_v7_nosmp_defconfig : NO BUILD capri multi_v7_nosmp_defconfig : NO BUILD chitra powerpc-pasemi_defconfig : BUILD FAILED colibri-vf61 multi_v7_nosmp_defconfig : NO BUILD colombus multi_v7_nosmp_defconfig : NO BUILD cosmic arm-imx_v6_v7_defconfig : FAILED 2:00.92 cosmic arm-multi_v7_defconfig : FAILED 2:11.05 cosmic multi_v7_nosmp_defconfig : NO BUILD cubie multi_v7_nosmp_defconfig : NO BUILD cubie2 multi_v7_nosmp_defconfig : NO BUILD cubox multi_v7_nosmp_defconfig : NO BUILD dalmore arm-tegra_defconfig : FAILED 1:49.62 dalmore arm-multi_v7_defconfig : FAILED 2:02.03 dalmore arm-multi_lpae_defconfig : FAILED 1:56.70 dalmore multi_v7_nosmp_defconfig : NO BUILD hummingboard multi_v7_nosmp_defconfig : NO BUILD jetsontk1 multi_v7_nosmp_defconfig : NO BUILD minnowmax minnowmax_defconfig : NO BUILD odroidu3 arm-exynos_defconfig : FAILED 1:49.58 omap5uevm arm-multi_v7_defconfig : FAILED 2:09.36 omap5uevm arm-multi_lpae_defconfig : FAILED 2:12.31 omap5uevm multi_v7_nosmp_defconfig : NO BUILD pandaes multi_v7_nosmp_defconfig : NO BUILD parallella multi_v7_nosmp_defconfig : NO BUILD pi multi_v7_nosmp_defconfig : NO BUILD pit multi_v7_nosmp_defconfig : NO BUILD rk3288evb multi_v7_nosmp_defconfig : NO BUILD seaboard arm-tegra_defconfig : FAILED 1:49.86 seaboard arm-multi_v7_defconfig : FAILED 1:51.68 seaboard multi_v7_nosmp_defconfig : NO BUILD snow multi_v7_nosmp_defconfig : NO BUILD snowball arm-u8500_defconfig : FAILED 1:56.58 snowball arm-multi_v7_defconfig : FAILED 2:06.57 snowball multi_v7_nosmp_defconfig : NO BUILD socfpga multi_v7_nosmp_defconfig : NO BUILD trimslice multi_v7_nosmp_defconfig : NO BUILD wandboard multi_v7_nosmp_defconfig : NO BUILD
Successful boards:
apc arm-vt8500_v6_v7_defconfig : passed 1:16.07 arndale arm-exynos_defconfig : passed 1:27.77 arndale arm-multi_v7_defconfig : passed 1:25.35 arndale arm-multi_lpae_defconfig : passed 1:33.45 capri arm-bcm_defconfig : passed 0:54.89 capri arm-multi_v7_defconfig : passed 0:54.43 chitra powerpc-ppc64_defconfig : passed 2:15.58 colombus arm-sunxi_defconfig : passed 2:23.03 colombus arm-multi_v7_defconfig : passed 2:38.22 colombus arm-multi_lpae_defconfig : passed 2:35.02 cubie arm-sunxi_defconfig : passed 0:52.68 cubie arm-multi_v7_defconfig : passed 0:53.53 cubie2 arm-sunxi_defconfig : passed 0:54.26 cubie2 arm-multi_v7_defconfig : passed 0:59.67 cubie2 arm-multi_lpae_defconfig : passed 0:54.27 cubox arm-multi_v7_defconfig : passed 1:19.39 cubox arm-mvebu_v7_defconfig : passed 1:09.25 hummingboard arm-imx_v6_v7_defconfig : passed 1:29.99 hummingboard arm-multi_v7_defconfig : passed 1:30.89 jetsontk1 arm-tegra_defconfig : passed 1:34.72 jetsontk1 arm-multi_v7_defconfig : passed 1:41.89 jetsontk1 arm-multi_lpae_defconfig : passed 2:17.94 omap5uevm arm-omap2plus_defconfig : passed 1:08.58 pandaes arm-omap2plus_defconfig : warnings 1:38.86 pandaes arm-multi_v7_defconfig : passed 1:57.46 pi arm-exynos_defconfig : passed 2:14.74 pi arm-multi_v7_defconfig : passed 2:22.35 pi arm-multi_lpae_defconfig : passed 2:21.33 pit arm-exynos_defconfig : passed 2:11.67 pit arm-multi_v7_defconfig : passed 2:18.38 pit arm-multi_lpae_defconfig : passed 2:22.43 seattle arm64-defconfig : warnings 2:15.08 snow arm-exynos_defconfig : passed 2:07.72 snow arm-multi_v7_defconfig : passed 2:01.87 snow arm-multi_lpae_defconfig : passed 1:58.45 trimslice arm-tegra_defconfig : passed 2:41.60 trimslice arm-multi_v7_defconfig : passed 1:35.77 wandboard arm-imx_v6_v7_defconfig : passed 1:20.81 wandboard arm-multi_v7_defconfig : passed 1:09.91
Offline boards:
beaver arm-tegra_defconfig : OFFLINE 2:13.08 beaver arm-multi_v7_defconfig : OFFLINE 2:16.08 colibri-vf61 arm-imx_v6_v7_defconfig : OFFLINE 2:13.88 colibri-vf61 arm-multi_v7_defconfig : OFFLINE 2:22.46 parallella arm-multi_v7_defconfig : OFFLINE 2:18.59 rk3288evb arm-multi_v7_defconfig : OFFLINE 0:46.48 rk3288evb arm-multi_lpae_defconfig : OFFLINE 0:43.83 sama5 arm-sama5_defconfig : OFFLINE 2:25.64 sama5d3-xplained arm-sama5_defconfig : OFFLINE 2:12.37 socfpga arm-socfpga_defconfig : OFFLINE 2:24.64 socfpga arm-multi_v7_defconfig : OFFLINE 2:20.27
Board legend is available at http://arm-soc.lixom.net/boards.html
Board bbb-arm-multi_v7_defconfig failure log: -------------------------------------------------
[ 1.631938] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.642251] ledtrig-cpu: registered to indicate activity on CPUs [ 1.649345] usbcore: registered new interface driver usbhid [ 1.655272] usbhid: USB HID core driver [ 1.667346] NET: Registered protocol family 10 [ 1.673938] sit: IPv6 over IPv4 tunneling driver [ 1.680083] NET: Registered protocol family 17 [ 1.684856] can: controller area network core (rev 20120528 abi 9) [ 1.691495] NET: Registered protocol family 29 [ 1.696216] can: raw protocol (rev 20120528) [ 1.700738] can: broadcast manager protocol (rev 20120528 t) [ 1.706735] can: netlink gateway (rev 20130117) max_hops=1 [ 1.713480] Key type dns_resolver registered [ 1.718384] omap_voltage_late_init: Voltage driver support not added [ 1.726697] ThumbEE CPU extension supported. [ 1.731331] Registering SWP/SWPB emulation handler [ 1.773430] tps65217 0-0024: TPS65217 ID 0xe version 1.2 [ 1.779962] at24 0-0050: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.787717] omap_i2c 44e0b000.i2c: bus 0 rev0.11 at 400 kHz [ 1.796411] at24 2-0054: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.804334] at24 2-0055: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.812158] at24 2-0056: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.819973] at24 2-0057: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.827328] omap_i2c 4819c000.i2c: bus 2 rev0.11 at 100 kHz [ 1.836027] cpufreq: cpufreq_online: CPU0: Running at unlisted freq: 550000 KHz [ 1.843942] cpufreq: cpufreq_online: CPU0: Unlisted initial frequency changed to: 600000 KHz [ 1.853669] mmc1: new high speed MMC card at address 0001 [ 1.860922] hctosys: unable to open rtc device (rtc0) [ 1.873908] mmcblk1: mmc1:0001 MMC02G 1.79 GiB [ 1.879919] mmcblk1boot0: mmc1:0001 MMC02G partition 1 1.00 MiB [ 1.886902] mmcblk1boot1: mmc1:0001 MMC02G partition 2 1.00 MiB [ 1.895731] mmcblk1: p1 p2 [ 1.901448] Waiting for root device /dev/mmcblk0p2...
[PYBOOT] [bbb 01:54]: Timed out waiting for "<type 'str'>":
[PYBOOT] [bbb 01:55]: got exception: timeout ~$off
[PYBOOT] [bbb 01:57]: Done. Board bbb-arm-omap2plus_defconfig failure log: -------------------------------------------------
[ 2.032054] omap_hsmmc 481d8000.mmc: lookup for GPIO cd failed [ 2.038169] omap_hsmmc 481d8000.mmc: GPIO lookup for consumer wp [ 2.044508] omap_hsmmc 481d8000.mmc: using device tree for GPIO lookup [ 2.051383] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@481d8000[0]' [ 2.060974] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@481d8000[0]' [ 2.070472] omap_hsmmc 481d8000.mmc: using lookup tables for GPIO lookup [ 2.077489] omap_hsmmc 481d8000.mmc: lookup for GPIO wp failed [ 2.120898] ledtrig-cpu: registered to indicate activity on CPUs [ 2.129575] oprofile: using arm/armv7 [ 2.134666] Initializing XFRM netlink socket [ 2.139744] NET: Registered protocol family 10 [ 2.150436] sit: IPv6 over IPv4 tunneling driver [ 2.159189] NET: Registered protocol family 17 [ 2.164107] NET: Registered protocol family 15 [ 2.169330] Key type dns_resolver registered [ 2.174256] omap_voltage_late_init: Voltage driver support not added [ 2.181000] sr_dev_init: No voltage domain specified for smartreflex0. Cannot initialize [ 2.189465] sr_dev_init: No voltage domain specified for smartreflex1. Cannot initialize [ 2.199702] ThumbEE CPU extension supported. [ 2.204355] Registering SWP/SWPB emulation handler [ 2.209387] SmartReflex Class3 initialized [ 2.278759] tps65217 0-0024: TPS65217 ID 0xe version 1.2 [ 2.286035] omap_i2c 44e0b000.i2c: bus 0 rev0.11 at 400 kHz [ 2.296512] mmc1: new high speed MMC card at address 0001 [ 2.308599] omap_i2c 4819c000.i2c: bus 2 rev0.11 at 100 kHz [ 2.316851] mmcblk1: mmc1:0001 MMC02G 1.79 GiB [ 2.324640] hctosys: unable to open rtc device (rtc0) [ 2.329960] sr_init: No PMIC hook to init smartreflex [ 2.335741] sr_init: platform driver register failed for SR [ 2.375566] mmcblk1boot0: mmc1:0001 MMC02G partition 1 1.00 MiB [ 2.383538] mmcblk1boot1: mmc1:0001 MMC02G partition 2 1.00 MiB [ 2.397812] mmcblk1: p1 p2 [ 2.415235] Waiting for root device /dev/mmcblk0p2...
[PYBOOT] [bbb 01:53]: Timed out waiting for "<type 'str'>":
[PYBOOT] [bbb 01:54]: got exception: timeout ~$off
[PYBOOT] [bbb 01:55]: Done. Board beagleboard-x15-arm-multi_lpae_defconfig failure log: -------------------------------------------------
[ 1.718226] at24 0-0050: 4096 byte 24c32 EEPROM, writable, 1 bytes/write [ 1.725312] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 1.750701] rtc-ds1307 2-006f: SET TIME! [ 1.756447] rtc-ds1307 2-006f: rtc core: registered mcp7941x as rtc0 [ 1.763194] rtc-ds1307 2-006f: 64 bytes nvram [ 1.767806] omap_i2c 48060000.i2c: bus 2 rev0.12 at 400 kHz [ 1.775994] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller [ 1.781776] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1 [ 1.790017] xhci-hcd xhci-hcd.0.auto: hcc params 0x0220f04c hci version 0x100 quirks 0x00010010 [ 1.799183] xhci-hcd xhci-hcd.0.auto: irq 400, io mem 0x48890000 [ 1.806055] hub 1-0:1.0: USB hub found [ 1.810006] hub 1-0:1.0: 1 port detected [ 1.814404] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller [ 1.820194] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2 [ 1.828298] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. [ 1.837301] hub 2-0:1.0: USB hub found [ 1.841271] hub 2-0:1.0: 1 port detected [ 1.847291] omap_hsmmc 4809c000.mmc: Got CD GPIO [ 1.881330] vdd_3v3: supplied by regen1 [ 1.919467] rtc-ds1307 2-006f: setting system clock to 2001-01-01 00:00:00 UTC (978307200) [ 1.937041] aic_dvdd_fixed: disabling [ 1.941783] Waiting for root device /dev/mmcblk0p1... [ 1.982250] mmc1: new high speed MMC card at address 0001 [ 1.988219] mmcblk1: mmc1:0001 S10004 3.56 GiB [ 1.993122] mmcblk1boot0: mmc1:0001 S10004 partition 1 4.00 MiB [ 1.999471] mmcblk1boot1: mmc1:0001 S10004 partition 2 4.00 MiB [ 2.006326] mmcblk1: p1 [ 2.120196] usb 1-1: new high-speed USB device number 2 using xhci-hcd [ 2.155223] usb 2-1: new SuperSpeed USB device number 2 using xhci-hcd [ 2.180404] hub 2-1:1.0: USB hub found [ 2.184383] hub 2-1:1.0: 4 ports detected [ 2.276426] hub 1-1:1.0: USB hub found [ 2.280414] hub 1-1:1.0: 4 ports detected
[PYBOOT] [beagleboard-x15 01:50]: Timed out waiting for "<type 'str'>":
[PYBOOT] [beagleboard-x15 01:51]: got exception: timeout ~$off
[PYBOOT] [beagleboard-x15 01:52]: Done. Board beagleboard-x15-arm-multi_v7_defconfig failure log: -------------------------------------------------
[ 1.717241] at24 0-0050: 4096 byte 24c32 EEPROM, writable, 1 bytes/write [ 1.724316] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 1.750708] rtc-ds1307 2-006f: SET TIME! [ 1.756448] rtc-ds1307 2-006f: rtc core: registered mcp7941x as rtc0 [ 1.763197] rtc-ds1307 2-006f: 64 bytes nvram [ 1.767812] omap_i2c 48060000.i2c: bus 2 rev0.12 at 400 kHz [ 1.776006] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller [ 1.781794] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1 [ 1.790045] xhci-hcd xhci-hcd.0.auto: hcc params 0x0220f04c hci version 0x100 quirks 0x00010010 [ 1.799199] xhci-hcd xhci-hcd.0.auto: irq 400, io mem 0x48890000 [ 1.806070] hub 1-0:1.0: USB hub found [ 1.810024] hub 1-0:1.0: 1 port detected [ 1.814423] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller [ 1.820200] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2 [ 1.828311] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. [ 1.837334] hub 2-0:1.0: USB hub found [ 1.841304] hub 2-0:1.0: 1 port detected [ 1.847323] omap_hsmmc 4809c000.mmc: Got CD GPIO [ 1.881345] vdd_3v3: supplied by regen1 [ 1.917870] rtc-ds1307 2-006f: setting system clock to 2001-01-01 00:00:00 UTC (978307200) [ 1.935085] aic_dvdd_fixed: disabling [ 1.939683] Waiting for root device /dev/mmcblk0p1... [ 1.972251] mmc1: new high speed MMC card at address 0001 [ 1.978213] mmcblk1: mmc1:0001 S10004 3.56 GiB [ 1.983105] mmcblk1boot0: mmc1:0001 S10004 partition 1 4.00 MiB [ 1.989451] mmcblk1boot1: mmc1:0001 S10004 partition 2 4.00 MiB [ 1.996326] mmcblk1: p1 [ 2.120203] usb 1-1: new high-speed USB device number 2 using xhci-hcd [ 2.155228] usb 2-1: new SuperSpeed USB device number 2 using xhci-hcd [ 2.180426] hub 2-1:1.0: USB hub found [ 2.184402] hub 2-1:1.0: 4 ports detected [ 2.276451] hub 1-1:1.0: USB hub found [ 2.280436] hub 1-1:1.0: 4 ports detected
[PYBOOT] [beagleboard-x15 01:40]: Timed out waiting for "<type 'str'>":
[PYBOOT] [beagleboard-x15 01:41]: got exception: timeout ~$off
[PYBOOT] [beagleboard-x15 01:43]: Done. Board beagleboard-x15-arm-omap2plus_defconfig failure log: -------------------------------------------------
[ 2.174183] omap_hsmmc 4809c000.mmc: using device tree for GPIO lookup [ 2.181058] of_get_named_gpiod_flags: parsed 'cd-gpios' property of node '/ocp/mmc@4809c000[0]' - status (0) [ 2.191445] omap_hsmmc 4809c000.mmc: Got CD GPIO [ 2.196305] omap_hsmmc 4809c000.mmc: GPIO lookup for consumer wp [ 2.202601] omap_hsmmc 4809c000.mmc: using device tree for GPIO lookup [ 2.209471] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@4809c000[0]' [ 2.219075] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@4809c000[0]' [ 2.228570] omap_hsmmc 4809c000.mmc: using lookup tables for GPIO lookup [ 2.235628] omap_hsmmc 4809c000.mmc: lookup for GPIO wp failed [ 2.283725] omap_hsmmc 480b4000.mmc: GPIO lookup for consumer cd [ 2.290024] omap_hsmmc 480b4000.mmc: using device tree for GPIO lookup [ 2.296894] of_get_named_gpiod_flags: can't parse 'cd-gpios' property of node '/ocp/mmc@480b4000[0]' [ 2.306489] of_get_named_gpiod_flags: can't parse 'cd-gpio' property of node '/ocp/mmc@480b4000[0]' [ 2.315986] omap_hsmmc 480b4000.mmc: using lookup tables for GPIO lookup [ 2.323025] omap_hsmmc 480b4000.mmc: lookup for GPIO cd failed [ 2.329141] omap_hsmmc 480b4000.mmc: GPIO lookup for consumer wp [ 2.335459] omap_hsmmc 480b4000.mmc: using device tree for GPIO lookup [ 2.342309] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@480b4000[0]' [ 2.351901] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@480b4000[0]' [ 2.361397] omap_hsmmc 480b4000.mmc: using lookup tables for GPIO lookup [ 2.368436] omap_hsmmc 480b4000.mmc: lookup for GPIO wp failed [ 2.375129] vdd_3v3: supplied by regen1 [ 2.413809] hctosys: unable to open rtc device (rtc0) [ 2.419115] sr_init: No PMIC hook to init smartreflex [ 2.424630] sr_init: platform driver register failed for SR [ 2.471913] aic_dvdd_fixed: disabling [ 2.476164] ldousb: disabling [ 2.483783] Waiting for root device /dev/mmcblk0p1... [ 2.535422] mmc1: new high speed MMC card at address 0001 [ 2.543186] mmcblk1: mmc1:0001 S10004 3.56 GiB [ 2.548444] mmcblk1boot0: mmc1:0001 S10004 partition 1 4.00 MiB [ 2.555215] mmcblk1boot1: mmc1:0001 S10004 partition 2 4.00 MiB [ 2.563722] mmcblk1: p1
[PYBOOT] [beagleboard-x15 01:41]: Timed out waiting for "<type 'str'>":
[PYBOOT] [beagleboard-x15 01:42]: got exception: timeout ~$off
[PYBOOT] [beagleboard-x15 01:43]: Done. Board cosmic-arm-imx_v6_v7_defconfig failure log: -------------------------------------------------
[ 14.484010] blk_update_request: I/O error, dev mmcblk0, sector 3633185 [ 18.558240] mmcblk0: error -110 transferring data, sector 3633186, nr 230, cmd response 0x900, card status 0x0 [ 18.568565] blk_update_request: I/O error, dev mmcblk0, sector 3633186 [ 22.642751] mmcblk0: error -110 transferring data, sector 3633187, nr 229, cmd response 0x900, card status 0x0 [ 22.653097] blk_update_request: I/O error, dev mmcblk0, sector 3633187 [ 26.727616] mmcblk0: error -110 transferring data, sector 3633188, nr 228, cmd response 0x900, card status 0x0 [ 26.737943] blk_update_request: I/O error, dev mmcblk0, sector 3633188 [ 30.812131] mmcblk0: error -110 transferring data, sector 3633189, nr 227, cmd response 0x900, card status 0x0 [ 30.822452] blk_update_request: I/O error, dev mmcblk0, sector 3633189 [ 34.896697] mmcblk0: error -110 transferring data, sector 3633190, nr 226, cmd response 0x900, card status 0x0 [ 34.907028] blk_update_request: I/O error, dev mmcblk0, sector 3633190 [ 38.981220] mmcblk0: error -110 transferring data, sector 3633191, nr 225, cmd response 0x900, card status 0x0 [ 38.991544] blk_update_request: I/O error, dev mmcblk0, sector 3633191 [ 43.065873] mmcblk0: error -110 transferring data, sector 3633192, nr 224, cmd response 0x900, card status 0x0 [ 43.076191] blk_update_request: I/O error, dev mmcblk0, sector 3633192 [ 47.150374] mmcblk0: error -110 transferring data, sector 3633193, nr 223, cmd response 0x900, card status 0x0 [ 47.160694] blk_update_request: I/O error, dev mmcblk0, sector 3633193 [ 51.234931] mmcblk0: error -110 transferring data, sector 3633194, nr 222, cmd response 0x900, card status 0x0 [ 51.245246] blk_update_request: I/O error, dev mmcblk0, sector 3633194 [ 55.319484] mmcblk0: error -110 transferring data, sector 3633195, nr 221, cmd response 0x900, card status 0x0 [ 55.329800] blk_update_request: I/O error, dev mmcblk0, sector 3633195 [ 59.404032] mmcblk0: error -110 transferring data, sector 3633196, nr 220, cmd response 0x900, card status 0x0 [ 59.414355] blk_update_request: I/O error, dev mmcblk0, sector 3633196 [ 63.488580] mmcblk0: error -110 transferring data, sector 3633197, nr 219, cmd response 0x900, card status 0x0 [ 63.498901] blk_update_request: I/O error, dev mmcblk0, sector 3633197 [ 67.573077] mmcblk0: error -110 transferring data, sector 3633198, nr 218, cmd response 0x900, card status 0x0 [ 67.583392] blk_update_request: I/O error, dev mmcblk0, sector 3633198 [ 71.657618] mmcblk0: error -110 transferring data, sector 3633199, nr 217, cmd response 0x900, card status 0x0 [ 71.667937] blk_update_request: I/O error, dev mmcblk0, sector 3633199 [ 75.742127] mmcblk0: error -110 transferring data, sector 3633200, nr 216, cmd response 0x900, card status 0x0 [ 75.752447] blk_update_request: I/O error, dev mmcblk0, sector 3633200 [ 79.826670] mmcblk0: error -110 transferring data, sector 3633201, nr 215, cmd response 0x900, card status 0x0 [ 79.836994] blk_update_request: I/O error, dev mmcblk0, sector 3633201
[PYBOOT] [cosmic 01:58]: Timed out waiting for "<type 'str'>":
[PYBOOT] [cosmic 01:59]: got exception: timeout ~$off
[PYBOOT] [cosmic 02:00]: Done. Board cosmic-arm-multi_v7_defconfig failure log: -------------------------------------------------
[ 14.084407] blk_update_request: I/O error, dev mmcblk0, sector 3633185 [ 18.158398] mmcblk0: error -110 transferring data, sector 3633186, nr 230, cmd response 0x900, card status 0x0 [ 18.168475] blk_update_request: I/O error, dev mmcblk0, sector 3633186 [ 22.242458] mmcblk0: error -110 transferring data, sector 3633187, nr 229, cmd response 0x900, card status 0x0 [ 22.252536] blk_update_request: I/O error, dev mmcblk0, sector 3633187 [ 26.326518] mmcblk0: error -110 transferring data, sector 3633188, nr 228, cmd response 0x900, card status 0x0 [ 26.336595] blk_update_request: I/O error, dev mmcblk0, sector 3633188 [ 30.410620] mmcblk0: error -110 transferring data, sector 3633189, nr 227, cmd response 0x900, card status 0x0 [ 30.420684] blk_update_request: I/O error, dev mmcblk0, sector 3633189 [ 34.494670] mmcblk0: error -110 transferring data, sector 3633190, nr 226, cmd response 0x900, card status 0x0 [ 34.504769] blk_update_request: I/O error, dev mmcblk0, sector 3633190 [ 38.578761] mmcblk0: error -110 transferring data, sector 3633191, nr 225, cmd response 0x900, card status 0x0 [ 38.588823] blk_update_request: I/O error, dev mmcblk0, sector 3633191 [ 42.662813] mmcblk0: error -110 transferring data, sector 3633192, nr 224, cmd response 0x900, card status 0x0 [ 42.672883] blk_update_request: I/O error, dev mmcblk0, sector 3633192 [ 46.746862] mmcblk0: error -110 transferring data, sector 3633193, nr 223, cmd response 0x900, card status 0x0 [ 46.756936] blk_update_request: I/O error, dev mmcblk0, sector 3633193 [ 50.830915] mmcblk0: error -110 transferring data, sector 3633194, nr 222, cmd response 0x900, card status 0x0 [ 50.840986] blk_update_request: I/O error, dev mmcblk0, sector 3633194 [ 54.914972] mmcblk0: error -110 transferring data, sector 3633195, nr 221, cmd response 0x900, card status 0x0 [ 54.925046] blk_update_request: I/O error, dev mmcblk0, sector 3633195 [ 58.999032] mmcblk0: error -110 transferring data, sector 3633196, nr 220, cmd response 0x900, card status 0x0 [ 59.009106] blk_update_request: I/O error, dev mmcblk0, sector 3633196 [ 63.083089] mmcblk0: error -110 transferring data, sector 3633197, nr 219, cmd response 0x900, card status 0x0 [ 63.093165] blk_update_request: I/O error, dev mmcblk0, sector 3633197 [ 67.167148] mmcblk0: error -110 transferring data, sector 3633198, nr 218, cmd response 0x900, card status 0x0 [ 67.177226] blk_update_request: I/O error, dev mmcblk0, sector 3633198 [ 71.251205] mmcblk0: error -110 transferring data, sector 3633199, nr 217, cmd response 0x900, card status 0x0 [ 71.261277] blk_update_request: I/O error, dev mmcblk0, sector 3633199 [ 75.335259] mmcblk0: error -110 transferring data, sector 3633200, nr 216, cmd response 0x900, card status 0x0 [ 75.345336] blk_update_request: I/O error, dev mmcblk0, sector 3633200 [ 79.419318] mmcblk0: error -110 transferring data, sector 3633201, nr 215, cmd response 0x900, card status 0x0 [ 79.429396] blk_update_request: I/O error, dev mmcblk0, sector 3633201
[PYBOOT] [cosmic 02:08]: Timed out waiting for "<type 'str'>":
[PYBOOT] [cosmic 02:09]: got exception: timeout ~$off
[PYBOOT] [cosmic 02:10]: Done. Board dalmore-arm-multi_lpae_defconfig failure log: -------------------------------------------------
[ 2.481188] Key type dns_resolver registered [ 2.487586] ThumbEE CPU extension supported. [ 2.492007] Registering SWP/SWPB emulation handler [ 2.517313] vdd-sys-5v0: supplied by vdd_ac_bat [ 2.523426] VDD_5V0_HDMI_CON: supplied by vdd-sys-5v0 [ 2.534705] vdd_hdmi_5v0: supplied by vdd-sys-5v0 [ 2.551102] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 2.557858] [drm] No driver support for vblank timestamp query. [ 2.580666] mmc1: new high speed MMC card at address 0001 [ 2.590529] mmcblk1: mmc1:0001 SEM32G 29.1 GiB [ 2.597651] mmcblk1boot0: mmc1:0001 SEM32G partition 1 4.00 MiB [ 2.607117] mmcblk1boot1: mmc1:0001 SEM32G partition 2 4.00 MiB [ 2.616683] mmcblk1rpmb: mmc1:0001 SEM32G partition 3 4.00 MiB [ 2.628467] mmcblk1: p1 [ 2.736732] Console: switching to colour frame buffer device 240x75 [ 2.823974] drm drm: fb0: frame buffer device [ 2.838991] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 2.848814] usb2_vbus: supplied by vdd-sys-5v0 [ 2.860713] tegra-ehci 7d008000.usb: EHCI Host Controller [ 2.866316] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 1 [ 2.876454] tegra-ehci 7d008000.usb: irq 339, io mem 0x7d008000 [ 2.888922] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.10 [ 2.899305] hub 1-0:1.0: USB hub found [ 2.903337] hub 1-0:1.0: 1 port detected [ 2.913398] input: gpio-keys as /devices/soc0/gpio-keys/input/input0 [ 2.927231] palmas-rtc 7000d000.i2c:tps65913@58:rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800) [ 2.989184] dvdd_ts: disabling [ 2.992284] usb1_vbus: disabling [ 2.995635] vdd_cam_1v8_reg: disabling [ 3.002937] Waiting for root device /dev/mmcblk0p1... [ 3.213881] usb 1-1: new high-speed USB device number 2 using tegra-ehci [ 4.197860] asix 1-1:1.0 eth0: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 48:f8:b3:2b:29:1f [ 49.033895] random: nonblocking pool is initialized
[PYBOOT] [dalmore 01:54]: Timed out waiting for "<type 'str'>":
[PYBOOT] [dalmore 01:55]: got exception: timeout ~$off
[PYBOOT] [dalmore 01:56]: Done. Board dalmore-arm-multi_v7_defconfig failure log: -------------------------------------------------
[ 2.480997] Key type dns_resolver registered [ 2.487396] ThumbEE CPU extension supported. [ 2.491814] Registering SWP/SWPB emulation handler [ 2.524127] vdd-sys-5v0: supplied by vdd_ac_bat [ 2.530336] VDD_5V0_HDMI_CON: supplied by vdd-sys-5v0 [ 2.539692] vdd_hdmi_5v0: supplied by vdd-sys-5v0 [ 2.554728] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 2.561502] [drm] No driver support for vblank timestamp query. [ 2.576782] mmc1: new high speed MMC card at address 0001 [ 2.586856] mmcblk1: mmc1:0001 SEM32G 29.1 GiB [ 2.595493] mmcblk1boot0: mmc1:0001 SEM32G partition 1 4.00 MiB [ 2.605202] mmcblk1boot1: mmc1:0001 SEM32G partition 2 4.00 MiB [ 2.613800] mmcblk1rpmb: mmc1:0001 SEM32G partition 3 4.00 MiB [ 2.623249] mmcblk1: p1 [ 2.739315] Console: switching to colour frame buffer device 240x75 [ 2.826609] drm drm: fb0: frame buffer device [ 2.848779] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 2.859010] usb2_vbus: supplied by vdd-sys-5v0 [ 2.870691] tegra-ehci 7d008000.usb: EHCI Host Controller [ 2.876339] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 1 [ 2.885039] tegra-ehci 7d008000.usb: irq 339, io mem 0x7d008000 [ 2.898810] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.10 [ 2.909058] hub 1-0:1.0: USB hub found [ 2.913056] hub 1-0:1.0: 1 port detected [ 2.923581] input: gpio-keys as /devices/soc0/gpio-keys/input/input0 [ 2.937742] palmas-rtc 7000d000.i2c:tps65913@58:rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800) [ 2.999436] dvdd_ts: disabling [ 3.002536] usb1_vbus: disabling [ 3.005899] vdd_cam_1v8_reg: disabling [ 3.013208] Waiting for root device /dev/mmcblk0p1... [ 3.229121] usb 1-1: new high-speed USB device number 2 using tegra-ehci [ 4.207346] asix 1-1:1.0 eth0: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 48:f8:b3:2b:29:1f [ 65.033972] random: nonblocking pool is initialized
[PYBOOT] [dalmore 01:59]: Timed out waiting for "<type 'str'>":
[PYBOOT] [dalmore 02:00]: got exception: timeout ~$off
[PYBOOT] [dalmore 02:01]: Done. Board dalmore-arm-tegra_defconfig failure log: -------------------------------------------------
[ 2.637436] Bluetooth: RFCOMM ver 1.11 [ 2.641411] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 2.646806] Bluetooth: BNEP socket layer initialized [ 2.651898] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 2.657895] Bluetooth: HIDP socket layer initialized [ 2.664804] Key type dns_resolver registered [ 2.674491] Registering SWP/SWPB emulation handler [ 2.699726] vdd-sys-5v0: supplied by vdd_ac_bat [ 2.705056] VDD_5V0_HDMI_CON: supplied by vdd-sys-5v0 [ 2.712330] vdd_hdmi_5v0: supplied by vdd-sys-5v0 [ 2.733991] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 2.740902] [drm] No driver support for vblank timestamp query. [ 2.918203] Console: switching to colour frame buffer device 240x75 [ 3.005041] drm drm: fb0: frame buffer device [ 3.030562] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 3.037843] usb2_vbus: supplied by vdd-sys-5v0 [ 3.046241] tegra-ehci 7d008000.usb: EHCI Host Controller [ 3.052052] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 1 [ 3.061235] tegra-ehci 7d008000.usb: irq 339, io mem 0x7d008000 [ 3.080569] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.10 [ 3.094640] hub 1-0:1.0: USB hub found [ 3.098625] hub 1-0:1.0: 1 port detected [ 3.112505] input: gpio-keys as /devices/soc0/gpio-keys/input/input1 [ 3.128291] palmas-rtc 7000d000.i2c:tps65913@58:rtc: setting system clock to 2000-01-01 00:00:01 UTC (946684801) [ 3.223453] dvdd_ts: disabling [ 3.226558] usb1_vbus: disabling [ 3.229821] vdd_cam_1v8_reg: disabling [ 3.234610] ALSA device list: [ 3.237628] #0: NVIDIA Tegra Dalmore [ 3.243602] Waiting for root device /dev/mmcblk0p1... [ 3.420447] usb 1-1: new high-speed USB device number 2 using tegra-ehci [ 4.443982] asix 1-1:1.0 eth0: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 48:f8:b3:2b:29:1f [ 62.530527] random: nonblocking pool is initialized
[PYBOOT] [dalmore 01:46]: Timed out waiting for "<type 'str'>":
[PYBOOT] [dalmore 01:47]: got exception: timeout ~$off
[PYBOOT] [dalmore 01:48]: Done. Board odroidu3-arm-exynos_defconfig failure log: -------------------------------------------------
[ 1.647574] usb 1-3: new high-speed USB device number 2 using exynos-ehci [ 1.656491] dwmmc_exynos 12550000.mmc: allocated mmc-pwrseq [ 1.687616] dwmmc_exynos 12550000.mmc: 1 slots initialized [ 1.688796] usbcore: registered new interface driver usbhid [ 1.694038] usbhid: USB HID core driver [ 1.702766] NET: Registered protocol family 10 [ 1.703388] sit: IPv6 over IPv4 tunneling driver [ 1.706594] NET: Registered protocol family 17 [ 1.710629] NET: Registered protocol family 15 [ 1.715081] Key type dns_resolver registered [ 1.719413] Registering SWP/SWPB emulation handler [ 1.725272] s3c-rtc 10070000.rtc: rtc disabled, re-enabling [ 1.729651] s3c-rtc 10070000.rtc: warning: invalid RTC value so initializing it [ 1.737053] s3c-rtc 10070000.rtc: rtc core: registered s3c as rtc1 [ 1.768133] max98090 1-0010: MAX98090 REVID=0x43 [ 1.770392] max98090 1-0010: use default 2.8v micbias [ 1.773076] mmc_host mmc1: Bus speed (slot 0) = 44000000Hz (slot req 52000000Hz, actual 44000000HZ div = 0) [ 1.782505] mmc_host mmc1: Bus speed (slot 0) = 73333333Hz (slot req 52000000Hz, actual 36666666HZ div = 1) [ 1.792029] mmc1: new DDR MMC card at address 0001 [ 1.794682] asoc-simple-card sound: HiFi <-> 3830000.i2s mapping ok [ 1.798047] input: gpio_keys as /devices/platform/gpio_keys/input/input0 [ 1.809811] mmcblk1: mmc1:0001 008G92 7.28 GiB [ 1.814026] mmcblk1boot0: mmc1:0001 008G92 partition 1 4.00 MiB [ 1.819913] mmcblk1boot1: mmc1:0001 008G92 partition 2 4.00 MiB [ 1.825824] mmcblk1rpmb: mmc1:0001 008G92 partition 3 512 KiB [ 1.832427] mmcblk1: p1 p2 [ 1.835596] max77686-rtc max77686-rtc: setting system clock to 2000-01-01 01:00:20 UTC (946688420) [ 1.860448] VDD10_HDMI_1.0V: disabling [ 1.861158] vdd_g3d: disabling [ 1.862233] BUCK8_2.8V: disabling [ 1.866286] ALSA device list: [ 1.867865] #0: Odroid-U3 [ 1.871637] Waiting for root device /dev/mmcblk0p2...
[PYBOOT] [odroidu3 01:46]: Timed out waiting for "<type 'str'>":
[PYBOOT] [odroidu3 01:47]: got exception: timeout ~$off
[PYBOOT] [odroidu3 01:49]: Done. Board omap5uevm-arm-multi_lpae_defconfig failure log: -------------------------------------------------
[ 2.240000] 3e40: c0d6b100 00000000 eefcce40 c030c494 0000154d 00000000 ff550000 c09dd444 [ 2.248523] 3e60: c1444b70 000017ff 0cfe0fd2 c0d6b0f4 c0d6b100 00000000 eefcce40 ee156e80 [ 2.257040] 3e80: 00000000 ee173ea0 c030f784 c0589848 80000013 ffffffff 00000051 c058985c [ 2.265558] 3ea0: ee710400 c133f970 ee710400 c09a45d0 00000000 00000000 00000000 00000000 [ 2.274076] 3ec0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 [ 2.282600] 3ee0: 00000000 00000000 ee710658 00061a80 ee710400 c09a0488 ee710658 ee156e80 [ 2.291111] 3f00: eefcce40 00000000 eefd0600 c0356718 c1302100 eefcce58 eefcce40 ee156e98 [ 2.299634] 3f20: 00000008 c1302100 eefcce58 ee172000 eefcce40 c0357384 ee15f1c0 ee156e80 [ 2.308161] 3f40: c035734c 00000000 ee15f1c0 ee156e80 c035734c 00000000 00000000 00000000 [ 2.316682] 3f60: 00000000 c035c140 00000000 00000000 a2042855 ee156e80 00000000 00000000 [ 2.325206] 3f80: ee173f80 ee173f80 00000000 00000000 ee173f90 ee173f90 ee15f1c0 ee15f1c0 [ 2.333719] 3fa0: c035c064 00000000 00000000 c0307d38 00000000 00000000 00000000 00000000 [ 2.342240] 3fc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 [ 2.350760] 3fe0: 00000000 00000000 00000000 00000000 00000013 00000000 40100501 53546495 [ 2.359284] [<c03842e4>] (__irq_wake_thread) from [<c0384390>] (handle_irq_event_percpu+0x74/0x14c) [ 2.368712] [<c0384390>] (handle_irq_event_percpu) from [<c03844ac>] (handle_irq_event+0x44/0x68) [ 2.377954] [<c03844ac>] (handle_irq_event) from [<c03876e8>] (handle_fasteoi_irq+0xb4/0x194) [ 2.386827] [<c03876e8>] (handle_fasteoi_irq) from [<c0383a84>] (generic_handle_irq+0x24/0x34) [ 2.395798] [<c0383a84>] (generic_handle_irq) from [<c0383d34>] (__handle_domain_irq+0x5c/0xb4) [ 2.404864] [<c0383d34>] (__handle_domain_irq) from [<c0301798>] (gic_handle_irq+0x54/0x94) [ 2.413558] [<c0301798>] (gic_handle_irq) from [<c030c494>] (__irq_svc+0x54/0x70) [ 2.421350] Exception stack(0xee173e50 to 0xee173e98) [ 2.426611] 3e40: 0000154d 00000000 ff550000 c09dd444 [ 2.435124] 3e60: c1444b70 000017ff 0cfe0fd2 c0d6b0f4 c0d6b100 00000000 eefcce40 ee156e80 [ 2.443645] 3e80: 00000000 ee173ea0 c030f784 c0589848 80000013 ffffffff [ 2.450534] [<c030c494>] (__irq_svc) from [<c0589848>] (__timer_delay+0x38/0x5c) [ 2.458243] [<c0589848>] (__timer_delay) from [<c09a45d0>] (mmc_go_idle+0xd4/0xd8) [ 2.466140] [<c09a45d0>] (mmc_go_idle) from [<c09a0488>] (mmc_rescan+0x25c/0x348) [ 2.473932] [<c09a0488>] (mmc_rescan) from [<c0356718>] (process_one_work+0x1ec/0x410) [ 2.482178] [<c0356718>] (process_one_work) from [<c0357384>] (worker_thread+0x38/0x594) [ 2.490618] [<c0357384>] (worker_thread) from [<c035c140>] (kthread+0xdc/0xf4) [ 2.498146] [<c035c140>] (kthread) from [<c0307d38>] (ret_from_fork+0x14/0x3c) [ 2.505672] Code: e2811024 eb081b06 e3500000 18bd8070 (e5952070) [ 2.512015] ---[ end t[ 2.5 [PYBOOT] [omap5uevm 02:09]: Timed out waiting for "<type 'str'>":
[PYBOOT] [omap5uevm 02:10]: got exception: timeout ~$off
[PYBOOT] [omap5uevm 02:11]: Done. Board omap5uevm-arm-multi_v7_defconfig failure log: -------------------------------------------------
[ 1.757257] usbcore: registered new interface driver usbhid [ 1.763089] usbhid: USB HID core driver [ 1.771579] NET: Registered protocol family 10 [ 1.776515] usb 1-3: new high-speed USB device number 2 using ehci-omap [ 1.783677] sit: IPv6 over IPv4 tunneling driver [ 1.788967] NET: Registered protocol family 17 [ 1.793636] can: controller area network core (rev 20120528 abi 9) [ 1.800152] NET: Registered protocol family 29 [ 1.804814] can: raw protocol (rev 20120528) [ 1.809272] can: broadcast manager protocol (rev 20120528 t) [ 1.815204] can: netlink gateway (rev 20130117) max_hops=1 [ 1.821234] Key type dns_resolver registered [ 1.825796] omap_vc_init_channel: No PMIC info for vdd_core [ 1.831628] omap_vp_init: No PMIC info for vdd_core [ 1.836729] omap_vc_init_channel: No PMIC info for vdd_mm [ 1.842374] omap_vp_init: No PMIC info for vdd_mm [ 1.847291] omap_vc_init_channel: No PMIC info for vdd_mpu [ 1.853035] omap_vp_init: No PMIC info for vdd_mpu [ 1.858552] Power Management for TI OMAP4+ devices. [ 1.863772] ThumbEE CPU extension supported. [ 1.868267] Registering SWP/SWPB emulation handler [ 1.875345] palmas 0-0048: Irq flag is 0x00000000 [ 1.901999] palmas 0-0048: Muxing GPIO 2, PWM 0, LED 0 [ 1.912693] palmas-rtc 48070000.i2c:palmas@48:rtc: rtc core: registered 48070000.i2c:palmas as rtc0 [ 1.924033] mmc0: new high speed MMC card at address 0001 [ 1.930189] mmcblk0: mmc0:0001 SEM04G 3.69 GiB [ 1.935098] mmcblk0boot0: mmc0:0001 SEM04G partition 1 2.00 MiB [ 1.941452] mmcblk0boot1: mmc0:0001 SEM04G partition 2 2.00 MiB [ 1.974570] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 2.000111] omap_i2c 4807c000.i2c: bus 4 rev0.12 at 400 kHz [ 2.010139] smsc95xx v1.0.4 [ 2.041147] cpufreq: cpufreq_online: CPU0: Running at unlisted freq: 1100000 KHz [ 2.049052] cpufreq: cpufreq_online: CPU0: Unlisted initial frequency changed to: 1500000 KHz
[PYBOOT] [omap5uevm 02:06]: Timed out waiting for "<type 'str'>":
[PYBOOT] [omap5uevm 02:07]: got exception: timeout ~$off
[PYBOOT] [omap5uevm 02:08]: Done. Board seaboard-arm-multi_v7_defconfig failure log: -------------------------------------------------
[ 1.656403] vdd_ldo7,avdd_hdmi,vdd_fuse: supplied by vdd_sm2,vin_ldo* [ 1.671008] utmi_phy_clk_enable: timeout waiting for phy to stabilize [ 1.677520] tegra-ehci c5000000.usb: EHCI Host Controller [ 1.682992] tegra-ehci c5000000.usb: new USB bus registered, assigned bus number 3 [ 1.690953] tegra-ehci c5000000.usb: irq 287, io mem 0xc5000000 [ 1.733562] mmc2: switch to bus width 8 failed [ 1.738356] mmc2: switch to bus width 4 failed [ 1.738696] tegra-ehci c5000000.usb: USB 2.0 started, EHCI 1.00 [ 1.748768] mmc2: new high speed MMC card at address 0001 [ 1.749267] hub 3-0:1.0: USB hub found [ 1.749327] hub 3-0:1.0: 1 port detected [ 1.754889] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 1.754893] [drm] No driver support for vblank timestamp query. [ 1.791383] mmcblk2: mmc2:0001 MMC08G 7.46 GiB [ 1.796809] mmcblk2boot0: mmc2:0001 MMC08G partition 1 512 KiB [ 1.797125] mmcblk2boot1: mmc2:0001 MMC08G partition 2 512 KiB [ 1.798710] mmcblk2: p3 [ 1.801267] mmc0: queuing unknown CIS tuple 0x80 (50 bytes) [ 1.809365] mmc0: queuing unknown CIS tuple 0x80 (7 bytes) [ 1.812296] mmc0: queuing unknown CIS tuple 0x80 (7 bytes) [ 1.819755] mmc0: queuing unknown CIS tuple 0x80 (19 bytes) [ 1.839402] mmc0: queuing unknown CIS tuple 0x02 (1 bytes) [ 1.846591] mmc0: new SDIO card at address 0001 [ 1.849704] Console: switching to colour frame buffer device 170x48 [ 1.925449] drm drm: fb0: frame buffer device [ 1.943746] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 1.950935] input: gpio-keys as /devices/soc0/gpio-keys/input/input2 [ 1.958178] tps6586x-rtc tps6586x-rtc: setting system clock to 2009-01-01 00:00:00 UTC (1230768000) [ 1.985424] vdd_1v5: disabling [ 1.988479] vdd_1v2: disabling [ 2.607209] asix 2-1:1.0 eth0: register 'asix' at usb-c5008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, c0:c1:c0:13:08:60 [ 2.618595] Waiting for root device /dev/mmcblk0p3... [ 58.179514] random: nonblocking pool is initialized
[PYBOOT] [seaboard 01:48]: Timed out waiting for "<type 'str'>":
[PYBOOT] [seaboard 01:49]: got exception: timeout ~$off
[PYBOOT] [seaboard 01:51]: Done. Board seaboard-arm-tegra_defconfig failure log: -------------------------------------------------
[ 1.668770] Bluetooth: RFCOMM ver 1.11 [ 1.672588] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 1.677919] Bluetooth: BNEP socket layer initialized [ 1.682909] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 1.688853] Bluetooth: HIDP socket layer initialized [ 1.694453] Key type dns_resolver registered [ 1.699956] Registering SWP/SWPB emulation handler [ 1.715779] tegra-dc 54200000.dc: failed to probe RGB output: -517 [ 1.722581] VDDIO_HDMI: supplied by vdd_5v0 [ 1.727040] vdd_sys: supplied by vdd_5v0 [ 1.731050] vdd_sm2,vin_ldo*: supplied by vdd_sys [ 1.736086] vdd_ldo8,avdd_hdmi_pll: supplied by vdd_sm2,vin_ldo* [ 1.742677] vdd_ldo7,avdd_hdmi,vdd_fuse: supplied by vdd_sm2,vin_ldo* [ 1.752744] utmi_phy_clk_enable: timeout waiting for phy to stabilize [ 1.759190] tegra-ehci c5000000.usb: EHCI Host Controller [ 1.764633] tegra-ehci c5000000.usb: new USB bus registered, assigned bus number 3 [ 1.772558] tegra-ehci c5000000.usb: irq 287, io mem 0xc5000000 [ 1.791530] tegra-ehci c5000000.usb: USB 2.0 started, EHCI 1.00 [ 1.799534] hub 3-0:1.0: USB hub found [ 1.803356] hub 3-0:1.0: 1 port detected [ 1.813832] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 1.820431] [drm] No driver support for vblank timestamp query. [ 1.882524] Console: switching to colour frame buffer device 170x48 [ 1.900025] drm drm: fb0: frame buffer device [ 1.931520] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 1.938574] input: gpio-keys as /devices/soc0/gpio-keys/input/input4 [ 1.946096] tps6586x-rtc tps6586x-rtc: setting system clock to 2009-01-01 00:00:00 UTC (1230768000) [ 1.964454] vdd_1v5: disabling [ 1.967505] vdd_1v2: disabling [ 1.970664] ALSA device list: [ 1.973644] #0: NVIDIA Tegra Seaboard [ 2.332349] asix 2-1:1.0 eth0: register 'asix' at usb-c5008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, c0:c1:c0:13:08:60 [ 2.343606] Waiting for root device /dev/mmcblk0p3...
[PYBOOT] [seaboard 01:47]: Timed out waiting for "<type 'str'>":
[PYBOOT] [seaboard 01:48]: got exception: timeout ~$off
[PYBOOT] [seaboard 01:49]: Done. Board snowball-arm-multi_v7_defconfig failure log: -------------------------------------------------
[ 1.927124] ledtrig-cpu: registered to indicate activity on CPUs [ 1.934020] usbcore: registered new interface driver usbhid [ 1.939636] usbhid: USB HID core driver [ 1.954162] NET: Registered protocol family 10 [ 1.960418] sit: IPv6 over IPv4 tunneling driver [ 1.966278] NET: Registered protocol family 17 [ 1.970794] can: controller area network core (rev 20120528 abi 9) [ 1.977142] NET: Registered protocol family 29 [ 1.981628] can: raw protocol (rev 20120528) [ 1.985931] can: broadcast manager protocol (rev 20120528 t) [ 1.991638] can: netlink gateway (rev 20130117) max_hops=1 [ 1.998016] Key type dns_resolver registered [ 2.002655] ThumbEE CPU extension supported. [ 2.006988] Registering SWP/SWPB emulation handler [ 2.019683] input: gpio_keys as /devices/soc0/gpio_keys/input/input0 [ 2.026824] rtc-pl031 80154000.rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800) [ 2.036376] thermal cooling_device0: thermal-cpufreq-0 bind to 0: 0-succeed [ 2.043426] thermal cooling_device0: thermal-cpufreq-0 bind to 1: 0-succeed [ 2.050476] thermal cooling_device0: thermal-cpufreq-0 bind to 2: 0-succeed [ 2.057495] db8500-cpufreq-cooling soc:cpufreq-cooling: Cooling device registered: thermal-cpufreq-0 [ 2.074584] db8500-esram12: disabling [ 2.078399] db8500-esram34: disabling [ 2.082519] V-CSI/DSI: disabling [ 2.085876] mmci-reg: disabling [ 2.090972] uart-pl011 80007000.uart: DMA channel TX dma0chan20 [ 2.096984] uart-pl011 80007000.uart: DMA channel RX dma0chan21 [ 2.105682] Waiting for root device /dev/mmcblk0p4... [ 2.143768] mmc3: new high speed MMC card at address 0001 [ 2.150085] mmcblk3: mmc3:0001 3.53 GiB [ 2.154541] mmcblk3boot0: mmc3:0001 partition 1 2.00 MiB [ 2.160400] mmcblk3boot1: mmc3:0001 partition 2 2.00 MiB [ 2.166229] mmcblk3rpmb: mmc3:0001 partition 3 128 KiB [ 2.173126] mmcblk3: p1 p2 p3 p4
[PYBOOT] [snowball 02:01]: Timed out waiting for "<type 'str'>":
[PYBOOT] [snowball 02:02]: got exception: timeout ~$off
[PYBOOT] [snowball 02:04]: Done. Board snowball-arm-u8500_defconfig failure log: -------------------------------------------------
[ 2.710937] ux500-msp-i2s ux500-msp-i2s.1: Failed to get DMA channel capabilities, falling back to period counting: -6 [ 2.721649] snd-soc-mop500 snd-soc-mop500.0: ab8500-codec-dai.0 <-> ux500-msp-i2s.1 mapping ok [ 2.731597] ux500-msp-i2s ux500-msp-i2s.3: Failed to get DMA channel capabilities, falling back to period counting: -6 [ 2.742309] snd-soc-mop500 snd-soc-mop500.0: ab8500-codec-dai.1 <-> ux500-msp-i2s.3 mapping ok [ 2.765899] NET: Registered protocol family 10 [ 2.771972] sit: IPv6 over IPv4 tunneling driver [ 2.778167] NET: Registered protocol family 17 [ 2.782714] NET: Registered protocol family 35 [ 2.787322] NET: Registered protocol family 37 [ 2.791900] Registering SWP/SWPB emulation handler [ 2.798217] coresight-etm3x 801ae000.ptm: PTM 1.0 initialized [ 2.804504] coresight-etm3x 801af000.ptm: PTM 1.0 initialized [ 2.811096] input: gpio_keys as /devices/soc0/gpio_keys/input/input1 [ 2.818084] ab8500-rtc ab8500-rtc.0: setting system clock to 2000-04-22 20:58:30 UTC (956437110) [ 2.827239] thermal cooling_device0: thermal-cpufreq-0 bind to 0: 0-succeed [ 2.834289] thermal cooling_device0: thermal-cpufreq-0 bind to 1: 0-succeed [ 2.841278] thermal cooling_device0: thermal-cpufreq-0 bind to 2: 0-succeed [ 2.848236] db8500-cpufreq-cooling soc:cpufreq-cooling: Cooling device registered: thermal-cpufreq-0 [ 2.861816] db8500-esram12: disabling [ 2.865570] db8500-esram34: disabling [ 2.869445] V-CSI/DSI: disabling [ 2.872741] mmci-reg: disabling [ 2.876068] ALSA device list: [ 2.879028] #0: MOP500-card [ 2.882385] uart-pl011 80007000.uart: DMA channel TX dma0chan24 [ 2.888336] uart-pl011 80007000.uart: DMA channel RX dma0chan25 [ 2.894531] Waiting for root device /dev/mmcblk0p4... Connected. cu: Got hangup signal cu: waitpid: No child processes Connected.
Disconnected.
[PYBOOT] [snowball 01:53]: Timed out waiting for "<type 'str'>":
[PYBOOT] [snowball 01:54]: got exception: timeout ~$off
[PYBOOT] [snowball 01:55]: Done.