Failed boards:
bbb multi_v7_defconfig : FAILED 1:22.62 panda multi_v7_defconfig : FAILED 1:36.16
Successful boards:
apc vt8500_v6_v7_defconfig : passed 1:16.49 arndale exynos_defconfig : passed 1:03.36 bbb omap2plus_defconfig : passed 1:31.32 beaver tegra_defconfig : passed 0:52.16 beaver multi_v7_defconfig : passed 0:51.51 capri bcm_defconfig : passed 0:42.97 capri multi_v7_defconfig : passed 0:44.73 cubie sunxi_defconfig : passed 0:47.59 cubie multi_v7_defconfig : passed 0:50.77 cubie2 sunxi_defconfig : passed 0:47.01 cubie2 multi_v7_defconfig : passed 1:00.55 cubie2 multi_lpae_defconfig : passed 0:49.83 cubox dove_defconfig : warnings 1:06.10 dalmore tegra_defconfig : passed 1:22.02 dalmore multi_v7_defconfig : passed 1:14.36 dalmore multi_lpae_defconfig : passed 1:20.56 panda omap2plus_defconfig : passed 1:17.33 sama5 sama5_defconfig : passed 1:49.56 seaboard tegra_defconfig : passed 0:59.33 seaboard multi_v7_defconfig : passed 1:04.64 snow exynos_defconfig : passed 1:20.58 snowball u8500_defconfig : passed 1:25.08 snowball multi_v7_defconfig : passed 2:11.54 trimslice tegra_defconfig : passed 0:59.39 trimslice multi_v7_defconfig : passed 1:00.20 wandboard imx_v6_v7_defconfig : passed 0:57.85 wandboard multi_v7_defconfig : passed 1:04.30
Board legend is available at http://arm-soc.lixom.net/boards.html
Last entries of failed logs below:
========================================================================
Board bbb-multi_v7_defconfig failure log: -------------------------------------------------
TFTP from server 172.16.1.3; our IP address is 172.16.1.121 Filename 'arm-soc/v3.13-rc5-961-ga69b188/multi_v7_defconfig/zImage'. Load address: 0x80200000 Loading: *###############################################node: bbb status: on ################## ################################################################# ################################################################# ################################################################# ##################################### 1.2 MiB/s done Bytes transferred = 4350584 (426278 hex) U-Boot# setenv serverip 172.16.1.3 setenv serverip 172.16.1.3 U-Boot# tftp 0x81f00000 arm-soc/v3.13-rc5-961-ga69b188/multi_v7_defconfig/dtbs/am335x-boneblack.dtb tftp 0x81f00000 arm-soc/v3.13-rc5-961-ga69b188/multi_v7_defconfig/dtbs/am335x-boneblack.dtb link up on port 0, speed 100, full duplex Using cpsw device TFTP from server 172.16.1.3; our IP address is 172.16.1.121 Filename 'arm-soc/v3.13-rc5-961-ga69b188/multi_v7_defconfig/dtbs/am335x-boneblack.dtb'. Load address: 0x81f00000 Loading: *## 583 KiB/s done Bytes transferred = 17911 (45f7 hex) U-Boot# setenv bootargs console=ttyO0,115200 root=/dev/mmcblk0p2 rootwait rw debug earlyprintk setenv bootargs console=ttyO0,115200 root=/dev/mmcblk0p2 rootwait rw debug earlyprintk U-Boot# printenv bootargs printenv bootargs bootargs=console=ttyO0,115200 root=/dev/mmcblk0p2 rootwait rw debug earlyprintk U-Boot# bootz 0x80200000 - 0x81f00000 bootz 0x80200000 - 0x81f00000 ## Flattened Device Tree blob at 81f00000 Booting using the fdt blob at 0x81f00000 Using Device Tree in place at 81f00000, end 81f075f6
Starting kernel ...
~$off # PYBOOT: Exception: timeout
========================================================================
Board panda-multi_v7_defconfig failure log: -------------------------------------------------
[ 1.415161] omap-dma-engine 4a056000.dma-controller: freeing channel for 62 [ 1.422515] platform 4809c000.mmc: Driver omap_hsmmc requests probe deferral [ 1.429962] omap_hsmmc 480d5000.mmc: could not find pctldev for node /ocp/pinmux@4a100040/pinmux_wl12xx_pins, deferring probe [ 1.441864] platform 480d5000.mmc: Driver omap_hsmmc requests probe deferral [ 1.449523] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.456359] usbcore: registered new interface driver usbhid [ 1.462188] usbhid: USB HID core driver [ 1.469177] TCP: cubic registered [ 1.472686] NET: Registered protocol family 17 [ 1.477508] Key type dns_resolver registered [ 1.482391] Power Management for TI OMAP4+ devices. [ 1.487579] Power Management for TI OMAP4. [ 1.491882] OMAP4 PM: u-boot >= v2012.07 is required for full PM support [ 1.499023] Registering SWP/SWPB emulation handler [ 1.504852] reg-fixed-voltage wl12xx_vmmc.10: could not find pctldev for node /ocp/pinmux@4a100040/pinmux_wl12xx_gpio, deferring probe [ 1.517669] platform wl12xx_vmmc.10: Driver reg-fixed-voltage requests probe deferral [ 1.526275] omap_i2c 48070000.i2c: could not find pctldev for node /ocp/pinmux@4a100040/pinmux_i2c1_pins, deferring probe [ 1.537811] platform 48070000.i2c: Driver omap_i2c requests probe deferral [ 1.545318] omap_i2c 48072000.i2c: could not find pctldev for node /ocp/pinmux@4a100040/pinmux_i2c2_pins, deferring probe [ 1.556823] platform 48072000.i2c: Driver omap_i2c requests probe deferral [ 1.564331] omap_i2c 48060000.i2c: could not find pctldev for node /ocp/pinmux@4a100040/pinmux_i2c3_pins, deferring probe [ 1.575836] platform 48060000.i2c: Driver omap_i2c requests probe deferral [ 1.583374] omap_i2c 48350000.i2c: could not find pctldev for node /ocp/pinmux@4a100040/pinmux_i2c4_pins, deferring probe [ 1.594879] platform 48350000.i2c: Driver omap_i2c requests probe deferral [ 1.602111] omap-dma-engine 4a056000.dma-controller: allocating channel for 62 [ 1.610321] omap-dma-engine 4a056000.dma-controller: allocating channel for 61 [ 1.616088] omap_hsmmc 4809c000.mmc: vmmc regulator missing [ 1.621856] omap-dma-engine 4a056000.dma-controller: freeing channel for 61 [ 1.631103] omap-dma-engine 4a056000.dma-controller: freeing channel for 62 [ 1.638458] platform 4809c000.mmc: Driver omap_hsmmc requests probe deferral [ 1.646118] omap_hsmmc 480d5000.mmc: could not find pctldev for node /ocp/pinmux@4a100040/pinmux_wl12xx_pins, deferring probe [ 1.658081] platform 480d5000.mmc: Driver omap_hsmmc requests probe deferral [ 1.665710] /home/build/work/batch/drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 1.666412] spear_cpufreq: Invalid cpufreq_tbl [ 1.679260] ALSA device list: [ 1.679260] No soundcards found. [ 1.686309] omap_uart 48020000.serial: no wakeirq for uart2 [ 1.686309] Waiting for root device /dev/mmcblk0p2... ~$off # PYBOOT: Exception: timeout