Tree/Branch: arm-soc Git describe: v3.15-8902-g213d819 Failed boot tests (console logs at the end) =========================================== qcom-apq8074-dragonboard: FAIL: arm-qcom_defconfig exynos5420-arndale-octa: FAIL: arm-exynos_defconfig ste-snowball: FAIL: arm-u8500_defconfig
Full Report ===========
arm-davinci_all_defconfig ------------------------- legacy,dm365evm 0 min 17.2 sec: PASS da850-evm 0 min 15.1 sec: PASS
arm-tegra_defconfig ------------------- tegra124-jetson-tk1 0 min 17.4 sec: PASS tegra30-beaver 0 min 17.7 sec: PASS
arm-multi_v7_defconfig+CONFIG_ARM_LPAE=y ---------------------------------------- tegra124-jetson-tk1 0 min 17.6 sec: PASS armada-xp-openblocks-ax3-4 0 min 23.9 sec: PASS omap5-uevm 1 min 37.4 sec: PASS (Warnings: 1) sun7i-a20-cubieboard2 0 min 13.1 sec: PASS
arm-mvebu_v7_defconfig+CONFIG_CPU_BIG_ENDIAN=y ---------------------------------------------- armada-xp-openblocks-ax3-4 0 min 23.9 sec: PASS armada-370-mirabox 0 min 20.6 sec: PASS
arm-omap2plus_defconfig ----------------------- legacy,3730xm 0 min 40.0 sec: PASS am335x-boneblack 0 min 22.8 sec: PASS omap3-beagle-xm 0 min 50.1 sec: PASS legacy,3530beagle 0 min 29.4 sec: PASS (Warnings: 1) omap4-panda 0 min 51.8 sec: PASS (Warnings: 1) omap3-overo-tobi 0 min 26.8 sec: PASS am335x-bone 0 min 24.6 sec: PASS omap3-overo-storm-tobi 0 min 21.8 sec: PASS omap5-uevm 0 min 52.9 sec: PASS (Warnings: 1) omap3-n900 0 min 18.2 sec: PASS legacy,n900 0 min 18.2 sec: PASS (Warnings: 1) omap4-panda-es 0 min 49.8 sec: PASS (Warnings: 1) legacy,3730storm 0 min 23.1 sec: PASS legacy,3530overo 0 min 21.5 sec: PASS (Warnings: 1)
arm-multi_v7_defconfig ---------------------- imx6dl-wandboard,wand-solo 0 min 15.5 sec: PASS am335x-boneblack 0 min 21.9 sec: PASS sun7i-a20-cubieboard2 0 min 12.9 sec: PASS sun4i-a10-cubieboard 0 min 17.6 sec: PASS exynos5410-smdk5410 0 min 29.1 sec: PASS am335x-bone 0 min 23.7 sec: PASS tegra124-jetson-tk1 0 min 17.5 sec: PASS armada-370-mirabox 0 min 21.8 sec: PASS omap4-panda 0 min 53.6 sec: PASS (Warnings: 1) imx6q-wandboard 0 min 14.2 sec: PASS imx6dl-wandboard,wand-dual 0 min 15.3 sec: PASS ste-snowball 1 min 11.4 sec: PASS tegra30-beaver 0 min 19.6 sec: PASS omap3-n900 0 min 15.3 sec: PASS qcom-apq8074-dragonboard 0 min 19.9 sec: PASS bcm28155-ap 0 min 27.1 sec: PASS omap3-overo-tobi 0 min 22.1 sec: PASS omap3-overo-storm-tobi 0 min 20.9 sec: PASS omap3-beagle-xm 0 min 52.7 sec: PASS exynos5420-arndale-octa 1 min 12.6 sec: PASS armada-xp-openblocks-ax3-4 0 min 25.1 sec: PASS omap5-uevm 1 min 41.9 sec: PASS (Warnings: 1) omap4-panda-es 0 min 55.8 sec: PASS (Warnings: 1) exynos5250-arndale 0 min 31.3 sec: PASS
arm-sunxi_defconfig ------------------- sun7i-a20-cubieboard2 0 min 11.7 sec: PASS sun4i-a10-cubieboard 0 min 16.3 sec: PASS
arm-qcom_defconfig ------------------ qcom-apq8074-dragonboard 0 min 17.9 sec: FAIL
arm-bcm_defconfig ----------------- bcm28155-ap 0 min 23.1 sec: PASS
arm-exynos_defconfig -------------------- exynos5420-arndale-octa 0 min 39.1 sec: FAIL exynos5250-arndale 0 min 29.7 sec: PASS exynos5410-smdk5410 0 min 27.3 sec: PASS
arm-imx_v6_v7_defconfig ----------------------- imx6dl-wandboard,wand-dual 0 min 15.4 sec: PASS imx6dl-wandboard,wand-solo 0 min 15.7 sec: PASS imx6q-wandboard 0 min 14.1 sec: PASS
arm-u8500_defconfig ------------------- ste-snowball 1 min 53.9 sec: FAIL
arm-multi_v7_defconfig+CONFIG_CPU_BIG_ENDIAN=y ---------------------------------------------- armada-xp-openblocks-ax3-4 0 min 26.5 sec: PASS armada-370-mirabox 0 min 22.2 sec: PASS
arm-mvebu_v7_defconfig ---------------------- armada-xp-openblocks-ax3-4 0 min 22.9 sec: PASS armada-370-mirabox 0 min 20.4 sec: PASS
arm-sama5_defconfig ------------------- sama5d35ek 0 min 15.7 sec: PASS (Warnings: 1)
Console logs for failures =========================
arm-qcom_defconfig ------------------
qcom-apq8074-dragonboard: FAIL: last 40 lines of boot log: ----------------------------------------------------------
[ 1.514365] 9fc0: c06d88ec c09b31fc 00000020 ee099fe0 c020fc90 c020fc94 60000013 ffffffff [ 1.522533] [<c06d06c0>] (__irq_svc) from [<c020fc94>] (arch_cpu_idle+0x28/0x30) [ 1.530692] [<c020fc94>] (arch_cpu_idle) from [<c025866c>] (cpu_startup_entry+0x128/0x268) [ 1.538154] [<c025866c>] (cpu_startup_entry) from [<00208624>] (0x208624) [ 1.546220] CPU2: stopping [ 1.553075] CPU: 2 PID: 0 Comm: swapper/2 Tainted: G D 3.15.0-08902-g213d819 #1 [ 1.555701] [<c0214b74>] (unwind_backtrace) from [<c02122b8>] (show_stack+0x10/0x14) [ 1.563944] [<c02122b8>] (show_stack) from [<c06cb360>] (dump_stack+0x70/0xbc) [ 1.571836] [<c06cb360>] (dump_stack) from [<c0213cd0>] (handle_IPI+0x154/0x188) [ 1.578864] [<c0213cd0>] (handle_IPI) from [<c0208588>] (gic_handle_irq+0x58/0x60) [ 1.586419] [<c0208588>] (gic_handle_irq) from [<c06d06c0>] (__irq_svc+0x40/0x70) [ 1.593789] Exception stack(0xee097f98 to 0xee097fe0) [ 1.601338] 7f80: 00000002 c0851740 [ 1.606380] 7fa0: 00000050 00000000 ee096000 ee096000 ee096000 c09b31fc c097246c 512f06f0 [ 1.614539] 7fc0: c06d88ec c09b31fc 00000020 ee097fe0 c020fc90 c020fc94 60000013 ffffffff [ 1.622706] [<c06d06c0>] (__irq_svc) from [<c020fc94>] (arch_cpu_idle+0x28/0x30) [ 1.630864] [<c020fc94>] (arch_cpu_idle) from [<c025866c>] (cpu_startup_entry+0x128/0x268) [ 1.638326] [<c025866c>] (cpu_startup_entry) from [<00208624>] (0x208624) [ 1.646391] CPU0: stopping [ 1.653244] CPU: 0 PID: 0 Comm: swapper/0 Tainted: G D 3.15.0-08902-g213d819 #1 [ 1.655866] [<c0214b74>] (unwind_backtrace) from [<c02122b8>] (show_stack+0x10/0x14) [ 1.664109] [<c02122b8>] (show_stack) from [<c06cb360>] (dump_stack+0x70/0xbc) [ 1.672005] [<c06cb360>] (dump_stack) from [<c0213cd0>] (handle_IPI+0x154/0x188) [ 1.679034] [<c0213cd0>] (handle_IPI) from [<c0208588>] (gic_handle_irq+0x58/0x60) [ 1.686586] [<c0208588>] (gic_handle_irq) from [<c06d06c0>] (__irq_svc+0x40/0x70) [ 1.693957] Exception stack(0xc096bf60 to 0xc096bfa8) [ 1.701510] bf60: 00000000 c0851740 000001e0 00000000 c096a000 c096a000 c096a000 c09b31fc [ 1.706549] bf80: c097246c 512f06f0 c06d88ec c09b31fc 00000000 c096bfa8 c020fc90 c020fc94 [ 1.714705] bfa0: 60000113 ffffffff [ 1.722866] [<c06d06c0>] (__irq_svc) from [<c020fc94>] (arch_cpu_idle+0x28/0x30) [ 1.726170] [<c020fc94>] (arch_cpu_idle) from [<c025866c>] (cpu_startup_entry+0x128/0x268) [ 1.733811] [<c025866c>] (cpu_startup_entry) from [<c091caa8>] (start_kernel+0x2e8/0x344) [ 1.741880] [<c091caa8>] (start_kernel) from [<00208074>] (0x208074) [ 1.750128] ---[ end Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b [ 1.750128] ~$off # PYBOOT: Exception: kernel: Unable to handle kernel NULL pointer dereference at virtual address 00000000
# PYBOOT: Time: 17.94 seconds. # PYBOOT: Result: FAIL
arm-exynos_defconfig --------------------
exynos5420-arndale-octa: FAIL: last 40 lines of boot log: ---------------------------------------------------------
[ 16.256555] mmcblk0: p1 p2 p3 p4 [ 16.259724] Unhandled fault: external abort on non-linefetch (0x008) at 0xf00bc088 [ 16.267262] Internal error: : 8 [#2] PREEMPT SMP ARM [ 16.272197] Modules linked in: [ 16.275235] CPU: 0 PID: 6 Comm: kworker/u16:0 Tainted: G D 3.15.0-08902-g213d819 #1 [ 16.283817] Workqueue: kmmcd mmc_rescan [ 16.287623] task: eec14000 ti: eecb4000 task.ti: eecb4000 [ 16.293002] PC is at rescan_partitions+0xb4/0x290 [ 16.297675] LR is at 0xf00bc000 [ 16.300796] pc : [<c01afcd8>] lr : [<f00bc000>] psr: 20000113 [ 16.300796] sp : eecb5c80 ip : 00000000 fp : 00000000 [ 16.312232] r10: 00000000 r9 : ed2d7140 r8 : ed24b200 [ 16.317431] r7 : 00000000 r6 : ed424280 r5 : 00000000 r4 : 00000008 [ 16.323930] r3 : 00000013 r2 : 00000000 r1 : 00000000 r0 : 00000001 [ 16.330431] Flags: nzCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment kernel [ 16.337710] Control: 10c5387d Table: 2000406a DAC: 00000015 [ 16.343429] Process kworker/u16:0 (pid: 6, stack limit = 0xeecb4240) [ 16.349754] Stack: (0xeecb5c80 to 0xeecb6000) [ 16.354091] 5c80: c054c214 00000001 eecb4000 c0387150 00000001 c05284f8 ed1f7598 c05283c8 [ 16.362235] 5ca0: ed424380 ed1f7468 ed424330 ed424280 00000000 ed1f7468 00000000 00000000 [ 16.370380] 5cc0: 00000000 ed424280 ed24b200 ed424290 00000001 00000000 00000000 c00e305c [ 16.378525] 5ce0: c00e19fc 00000000 00000000 00000001 ed424280 00000000 ed24b270 ed24b20c [ 16.386671] 5d00: 00000000 ed1f7380 00000003 c00e32c0 c052a6cc 00000001 00000003 c0388418 [ 16.394816] 5d20: c052a6cc c00e1fcc eecb5d34 c02222ec ed24b240 00000001 ed424280 ed24b200 [ 16.402961] 5d40: ed24b270 ed24b20c 00000000 ed1f7380 00000003 c01adbf0 c01aca44 ed24b200 [ 16.411108] 5d60: 00000080 0b300000 00000002 eeefc800 eeef8000 eeeff000 eeeff000 eeeff2bc [ 16.419253] 5d80: c02baca8 eeef8000 eeeff000 eeef8188 eecb5dd6 c02bbbac 00000056 eeef806c [ 16.427398] 5da0: 00000003 eeefc800 eeef8000 c02bc7dc 00000003 eecb5dd6 00000008 ed1d5708 [ 16.435544] 5dc0: c0469eec eeeff298 00000000 34362e33 42694720 32310000 694b2038 c0000042 [ 16.443689] 5de0: 00000001 eeef8008 c058de1c 00000000 c054c19c 00000001 00000000 c054be48 [ 16.451835] 5e00: eec13c00 c02b112c c02b1114 c0225d90 00000000 eeef8008 c0225f40 eeefb408 [ 16.459981] 5e20: 00000000 c022456c eef51698 ed1ad044 eeef8008 eeef803c c054bd68 c0225c6c [ 16.468126] 5e40: eeef8008 eeef8008 c054bd68 c02253dc eeef8008 00000000 eeef8010 c0223a44 [ 16.476272] 5e60: eec13c00 c0381094 c047d090 eecb5e84 00061a80 eeef8000 eeef8008 c047d03c [ 16.484417] 5e80: 00061a80 c03b10ac 00000000 c02b154c c047d03c c0451f2c c047cff8 00000001 [ 16.492562] 5ea0: eeefb400 00000000 eeefb400 c02b3f98 00061a80 40ff8080 00000000 eeefb5ec [ 16.500708] 5ec0: c03b10a0 c02b0dd8 e~$off # PYBOOT: Exception: kernel: ERROR: failed to boot: Unhandled fault # PYBOOT: Time: 39.12 seconds. # PYBOOT: Result: FAIL
arm-u8500_defconfig -------------------
ste-snowball: FAIL: last 40 lines of boot log: ----------------------------------------------
[ 3.499267] musb-hdrc musb-hdrc.20.auto: musb_init_controller failed with status -517 [ 3.507141] platform musb-hdrc.20.auto: Driver musb-hdrc requests probe deferral [ 3.515167] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.20.auto [ 3.527069] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.20.auto) status -22 [ 3.534393] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.545867] musb-ux500 musb-hdrc.20.auto: Error applying setting, reverse things back [ 3.554565] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.21.auto [ 3.566497] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.21.auto) status -22 [ 3.573822] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.585296] musb-hdrc musb-hdrc.21.auto: Error applying setting, reverse things back [ 3.593109] HS USB OTG: no transceiver configured [ 3.597808] musb-hdrc musb-hdrc.21.auto: musb_init_controller failed with status -517 [ 3.605682] platform musb-hdrc.21.auto: Driver musb-hdrc requests probe deferral [ 3.613708] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.21.auto [ 3.625640] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.21.auto) status -22 [ 3.632965] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.644439] musb-ux500 musb-hdrc.21.auto: Error applying setting, reverse things back [ 3.653106] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.22.auto [ 3.665039] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.22.auto) status -22 [ 3.672363] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.683837] musb-hdrc musb-hdrc.22.auto: Error applying setting, reverse things back [ 3.691650] HS USB OTG: no transceiver configured [ 3.696350] musb-hdrc musb-hdrc.22.auto: musb_init_controller failed with status -517 [ 3.704223] platform musb-hdrc.22.auto: Driver musb-hdrc requests probe deferral [ 3.712249] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.22.auto [ 3.724182] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.22.auto) status -22 [ 3.731506] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.742980] musb-ux500 musb-hdrc.22.auto: Error applying setting, reverse things back [ 3.751647] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.23.auto [ 3.763580] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.23.auto) status -22 [ 3.770904] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.782379] musb-hdrc musb-hdrc.23.auto: Error applying setting, reverse things back [ 3.790191] HS USB OTG: no transceiver configured [ 3.794921] musb-hdrc musb-hdrc.23.auto: musb_init_controller failed with status -517 [ 3.802764] platform musb-hdrc.23.auto: Driver musb-hdrc requests probe deferral [ 3.810821] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.23.auto ~$off # PYBOOT: Exception: kernel: ERROR: failed to boot: <class 'pexpect.TIMEOUT'> # PYBOOT: Time: 113.89 seconds. # PYBOOT: Result: FAIL