stable-rc boot: 44 passed 19 failed (stable-rc/v4.1.26)

Full logs are available at http://arm-soc.lixom.net/bootlogs/stable-rc/v4.1.26/

Failed boards:

arndale arm-multi_v7_nosmp_defconfig : BUILD FAILED bbb arm-omap2plus_defconfig : FAILED 1:52.87 bbb arm-multi_v7_defconfig : FAILED 1:54.78 bbb arm-multi_v7_nosmp_defconfig : BUILD FAILED beagleboard-x15 arm-omap2plus_defconfig : FAILED 1:42.78 beagleboard-x15 arm-multi_v7_defconfig : FAILED 1:42.23 beagleboard-x15 arm-multi_lpae_defconfig : FAILED 1:43.51 beagleboard-x15 arm-multi_v7_nosmp_defconfig : BUILD FAILED beaver arm-tegra_defconfig : FAILED 1:43.68 beaver arm-multi_v7_defconfig : FAILED 1:56.32 beaver arm-multi_v7_nosmp_defconfig : BUILD FAILED capri arm-multi_v7_nosmp_defconfig : BUILD FAILED chitra powerpc-pasemi_defconfig : BUILD FAILED colibri-vf61 arm-multi_v7_nosmp_defconfig : BUILD FAILED colombus arm-multi_v7_nosmp_defconfig : BUILD FAILED cosmic arm-multi_v7_nosmp_defconfig : BUILD FAILED cubie arm-multi_v7_nosmp_defconfig : BUILD FAILED cubie2 arm-multi_v7_nosmp_defconfig : BUILD FAILED cubox arm-multi_v7_nosmp_defconfig : BUILD FAILED dalmore arm-tegra_defconfig : FAILED 1:48.61 dalmore arm-multi_v7_defconfig : FAILED 1:54.30 dalmore arm-multi_lpae_defconfig : FAILED 2:05.88 dalmore arm-multi_v7_nosmp_defconfig : BUILD FAILED hummingboard arm-imx_v6_v7_defconfig : FAILED 1:45.75 hummingboard arm-multi_v7_defconfig : FAILED 1:43.86 hummingboard arm-multi_v7_nosmp_defconfig : BUILD FAILED jetsontk1 arm-multi_v7_nosmp_defconfig : BUILD FAILED jetsontx1 arm64-defconfig : NO DTB jetsontx1 arm64-nosmp_defconfig : NO DTB odroidu3 arm-exynos_defconfig : FAILED 2:04.88 odroidu3 arm-multi_v7_defconfig : FAILED 1:50.62 omap5uevm arm-multi_v7_nosmp_defconfig : BUILD FAILED pandaes arm-multi_v7_nosmp_defconfig : BUILD FAILED parallella arm-multi_v7_nosmp_defconfig : BUILD FAILED pi arm-multi_v7_nosmp_defconfig : BUILD FAILED pit arm-multi_v7_nosmp_defconfig : BUILD FAILED rk3288evb arm-multi_v7_nosmp_defconfig : BUILD FAILED seaboard arm-tegra_defconfig : FAILED 1:48.75 seaboard arm-multi_v7_defconfig : FAILED 2:50.78 seaboard arm-multi_v7_nosmp_defconfig : BUILD FAILED seattle arm64-nosmp_defconfig : FAILED 2:59.32 snow arm-multi_v7_nosmp_defconfig : BUILD FAILED snowball arm-u8500_defconfig : FAILED 1:59.05 snowball arm-multi_v7_defconfig : FAILED 2:14.73 snowball arm-multi_v7_nosmp_defconfig : BUILD FAILED socfpga arm-multi_v7_nosmp_defconfig : BUILD FAILED trimslice arm-multi_v7_nosmp_defconfig : BUILD FAILED wandboard arm-multi_v7_nosmp_defconfig : BUILD FAILED

Successful boards:

apc arm-vt8500_v6_v7_defconfig : passed 1:20.44 arndale arm-exynos_defconfig : passed 1:28.38 arndale arm-multi_v7_defconfig : passed 1:30.87 arndale arm-multi_lpae_defconfig : passed 1:28.24 capri arm-multi_v7_defconfig : passed 0:45.43 chitra powerpc-ppc64_defconfig : passed 3:56.69 colombus arm-sunxi_defconfig : passed 1:06.36 colombus arm-multi_v7_defconfig : passed 1:24.45 colombus arm-multi_lpae_defconfig : passed 1:08.82 cosmic arm-imx_v6_v7_defconfig : passed 3:16.42 cosmic arm-multi_v7_defconfig : passed 3:48.34 cubie arm-sunxi_defconfig : passed 0:52.48 cubie arm-multi_v7_defconfig : passed 0:53.24 cubie2 arm-sunxi_defconfig : passed 0:48.43 cubie2 arm-multi_v7_defconfig : passed 1:01.57 cubie2 arm-multi_lpae_defconfig : passed 1:00.38 cubox arm-multi_v7_defconfig : passed 1:04.05 cubox arm-mvebu_v7_defconfig : passed 1:25.25 jetsontk1 arm-tegra_defconfig : passed 1:31.61 jetsontk1 arm-multi_v7_defconfig : passed 1:40.34 jetsontk1 arm-multi_lpae_defconfig : passed 1:36.51 minnowmax x86-minnowmax_defconfig : passed 1:41.27 omap5uevm arm-omap2plus_defconfig : passed 1:03.67 omap5uevm arm-multi_v7_defconfig : passed 1:11.49 omap5uevm arm-multi_lpae_defconfig : passed 1:18.23 pandaes arm-omap2plus_defconfig : warnings 1:49.96 pandaes arm-multi_v7_defconfig : passed 1:42.30 parallella arm-multi_v7_defconfig : passed 4:08.42 pi arm-exynos_defconfig : passed 1:35.53 pi arm-multi_v7_defconfig : passed 1:33.78 pi arm-multi_lpae_defconfig : passed 2:05.40 pit arm-exynos_defconfig : passed 1:29.67 pit arm-multi_v7_defconfig : passed 1:37.18 pit arm-multi_lpae_defconfig : passed 1:53.11 seattle arm64-defconfig : passed 2:17.75 snow arm-exynos_defconfig : passed 1:09.33 snow arm-multi_v7_defconfig : passed 1:06.47 snow arm-multi_lpae_defconfig : passed 1:17.91 socfpga arm-socfpga_defconfig : passed 1:12.95 socfpga arm-multi_v7_defconfig : passed 1:36.12 trimslice arm-tegra_defconfig : passed 1:38.15 trimslice arm-multi_v7_defconfig : passed 2:58.82 wandboard arm-imx_v6_v7_defconfig : passed 1:07.93 wandboard arm-multi_v7_defconfig : passed 1:10.84

Offline boards:

colibri-vf61 arm-imx_v6_v7_defconfig : OFFLINE 1:19.48 colibri-vf61 arm-multi_v7_defconfig : OFFLINE 1:22.01 rk3288evb arm-multi_v7_defconfig : OFFLINE 0:50.20 rk3288evb arm-multi_lpae_defconfig : OFFLINE 0:43.21 sama5 arm-sama5_defconfig : OFFLINE 2:15.80 sama5d3-xplained arm-sama5_defconfig : OFFLINE 3:11.04

Board legend is available at http://arm-soc.lixom.net/boards.html

Last entries of failed logs below:

========================================================================

Board bbb-arm-multi_v7_defconfig failure log: -------------------------------------------------

[ 1.395107] omap_hsmmc 48060000.mmc: Got CD GPIO [ 1.460676] Synopsys Designware Multimedia Card Interface Driver [ 1.468271] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.477356] ledtrig-cpu: registered to indicate activity on CPUs [ 1.484189] usbcore: registered new interface driver usbhid [ 1.490083] usbhid: USB HID core driver [ 1.498655] usbcore: registered new interface driver snd-usb-audio [ 1.509382] NET: Registered protocol family 17 [ 1.514208] can: controller area network core (rev 20120528 abi 9) [ 1.520905] NET: Registered protocol family 29 [ 1.525629] can: raw protocol (rev 20120528) [ 1.530159] can: broadcast manager protocol (rev 20120528 t) [ 1.536144] can: netlink gateway (rev 20130117) max_hops=1 [ 1.542661] Key type dns_resolver registered [ 1.547524] omap_voltage_late_init: Voltage driver support not added [ 1.555508] ThumbEE CPU extension supported. [ 1.560106] Registering SWP/SWPB emulation handler [ 1.573698] omap_i2c 44e0b000.i2c: bus 0 rev0.11 at 400 kHz [ 1.627938] mmc1: MAN_BKOPS_EN bit is not set [ 1.634406] mmc1: new high speed MMC card at address 0001 [ 1.640869] mmcblk0: mmc1:0001 MMC02G 1.79 GiB [ 1.645880] davinci_mdio 4a101000.mdio: davinci mdio revision 1.6 [ 1.652318] davinci_mdio 4a101000.mdio: detected phy mask fffffffe [ 1.659250] mmcblk0boot0: mmc1:0001 MMC02G partition 1 1.00 MiB [ 1.666022] mmcblk0boot1: mmc1:0001 MMC02G partition 2 1.00 MiB [ 1.673172] libphy: 4a101000.mdio: probed [ 1.677470] davinci_mdio 4a101000.mdio: phy[0]: device 4a101000.mdio:00, driver SMSC LAN8710/LAN8720 [ 1.689040] cpsw 4a100000.ethernet: Detected MACID = bc:6a:29:7a:42:a8 [ 1.697890] hctosys: unable to open rtc device (rtc0) [ 1.710113] ALSA device list: [ 1.713252] No soundcards found. [ 1.720563] mmcblk0: p1 p2 [ 1.727725] Waiting for root device /dev/mmcblk1p2...

[PYBOOT] [bbb 01:52]: Timed out waiting for "<type 'str'>":

[PYBOOT] [bbb 01:53]: got exception: timeout ~$off

[PYBOOT] [bbb 01:54]: Done.

========================================================================

Board bbb-arm-omap2plus_defconfig failure log: -------------------------------------------------

[ 1.904835] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@481d8000[0]' [ 1.914440] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@481d8000[0]' [ 1.923949] omap_hsmmc 481d8000.mmc: using lookup tables for GPIO lookup [ 1.930974] omap_hsmmc 481d8000.mmc: lookup for GPIO wp failed [ 1.974138] ledtrig-cpu: registered to indicate activity on CPUs [ 1.982310] oprofile: using arm/armv7 [ 1.987510] Initializing XFRM netlink socket [ 1.992218] NET: Registered protocol family 17 [ 1.997119] NET: Registered protocol family 15 [ 2.002372] Key type dns_resolver registered [ 2.007283] omap_voltage_late_init: Voltage driver support not added [ 2.014020] sr_dev_init: No voltage domain specified for smartreflex0. Cannot initialize [ 2.022496] sr_dev_init: No voltage domain specified for smartreflex1. Cannot initialize [ 2.032704] ThumbEE CPU extension supported. [ 2.037344] Registering SWP/SWPB emulation handler [ 2.042382] SmartReflex Class3 initialized [ 2.110620] mmc1: MAN_BKOPS_EN bit is not set [ 2.116220] tps65217 0-0024: TPS65217 ID 0xe version 1.2 [ 2.122035] omap_i2c 44e0b000.i2c: bus 0 rev0.11 at 400 kHz [ 2.150152] mmc1: new high speed MMC card at address 0001 [ 2.159832] mmcblk0: mmc1:0001 MMC02G 1.79 GiB [ 2.165667] mmcblk0boot0: mmc1:0001 MMC02G partition 1 1.00 MiB [ 2.172626] mmcblk0boot1: mmc1:0001 MMC02G partition 2 1.00 MiB [ 2.185791] mmcblk0: p1 p2 [ 2.195534] davinci_mdio 4a101000.mdio: davinci mdio revision 1.6 [ 2.201942] davinci_mdio 4a101000.mdio: detected phy mask fffffffe [ 2.221733] libphy: 4a101000.mdio: probed [ 2.226162] davinci_mdio 4a101000.mdio: phy[0]: device 4a101000.mdio:00, driver SMSC LAN8710/LAN8720 [ 2.237878] cpsw 4a100000.ethernet: Detected MACID = bc:6a:29:7a:42:a8 [ 2.249708] hctosys: unable to open rtc device (rtc0) [ 2.255165] sr_init: No PMIC hook to init smartreflex [ 2.260919] sr_init: platform driver register failed for SR [ 2.307295] Waiting for root device /dev/mmcblk1p2...

[PYBOOT] [bbb 01:50]: Timed out waiting for "<type 'str'>":

[PYBOOT] [bbb 01:51]: got exception: timeout ~$off

[PYBOOT] [bbb 01:52]: Done.

========================================================================

Board beagleboard-x15-arm-multi_lpae_defconfig failure log: -------------------------------------------------

[ 1.753811] reg-fixed-voltage fixedregulator-vdd_3v3: Failed to resolve vin-supply for vdd_3v3 [ 1.763270] reg-fixed-voltage fixedregulator-vdd_3v3: Failed to resolve vin-supply for vdd_3v3 [ 1.772726] reg-fixed-voltage fixedregulator-vdd_3v3: Failed to resolve vin-supply for vdd_3v3 [ 1.782986] reg-fixed-voltage fixedregulator-vdd_3v3: Failed to resolve vin-supply for vdd_3v3 [ 1.793465] reg-fixed-voltage fixedregulator-vdd_3v3: Failed to resolve vin-supply for vdd_3v3 [ 1.803944] reg-fixed-voltage fixedregulator-vdd_3v3: Failed to resolve vin-supply for vdd_3v3 [ 1.813504] vdd_3v3: supplied by regen1 [ 1.817707] vtt_fixed: supplied by smps3 [ 1.826899] palmas-rtc 48070000.i2c:tps659038@58:tps659038_rtc: rtc core: registered 48070000.i2c:tps659 as rtc1 [ 1.840069] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 1.863736] rtc-ds1307 2-006f: SET TIME! [ 1.868571] rtc-ds1307 2-006f: rtc core: registered mcp7941x as rtc0 [ 1.875268] rtc-ds1307 2-006f: 64 bytes nvram [ 1.879863] omap_i2c 48060000.i2c: bus 2 rev0.12 at 400 kHz [ 1.887143] omap_hsmmc 4809c000.mmc: Got CD GPIO [ 1.992822] mmc1: MAN_BKOPS_EN bit is not set [ 1.997414] davinci_mdio 48485000.mdio: davinci mdio revision 1.6 [ 2.003820] davinci_mdio 48485000.mdio: detected phy mask fffffff9 [ 2.014226] libphy: 48485000.mdio: probed [ 2.018450] davinci_mdio 48485000.mdio: phy[1]: device 48485000.mdio:01, driver Micrel KSZ9031 Gigabit PHY [ 2.028592] davinci_mdio 48485000.mdio: phy[2]: device 48485000.mdio:02, driver Micrel KSZ9031 Gigabit PHY [ 2.039336] cpsw 48484000.ethernet: Detected MACID = 74:da:ea:08:33:f4 [ 2.046707] cpsw 48484000.ethernet: cpsw: Detected MACID = 74:da:ea:08:33:f5 [ 2.054142] mmc1: new high speed MMC card at address 0001 [ 2.060059] mmcblk0: mmc1:0001 S10004 3.56 GiB [ 2.064902] rtc-ds1307 2-006f: setting system clock to 2001-01-01 00:00:00 UTC (978307200) [ 2.078265] mmcblk0boot0: mmc1:0001 S10004 partition 1 4.00 MiB [ 2.084605] mmcblk0boot1: mmc1:0001 S10004 partition 2 4.00 MiB [ 2.084612] ldousb: disabling [ 2.094334] ALSA device list: [ 2.094704] mmcblk0: p1 [ 2.100110] No soundcards found. [ 2.104156] Waiting for root device /dev/mmcblk1p1...

[PYBOOT] [beagleboard-x15 01:40]: Timed out waiting for "<type 'str'>":

[PYBOOT] [beagleboard-x15 01:41]: got exception: timeout ~$off

[PYBOOT] [beagleboard-x15 01:42]: Done.

========================================================================

Board beagleboard-x15-arm-multi_v7_defconfig failure log: -------------------------------------------------

[ 1.753799] reg-fixed-voltage fixedregulator-vdd_3v3: Failed to resolve vin-supply for vdd_3v3 [ 1.763278] reg-fixed-voltage fixedregulator-vdd_3v3: Failed to resolve vin-supply for vdd_3v3 [ 1.772732] reg-fixed-voltage fixedregulator-vdd_3v3: Failed to resolve vin-supply for vdd_3v3 [ 1.782956] reg-fixed-voltage fixedregulator-vdd_3v3: Failed to resolve vin-supply for vdd_3v3 [ 1.793416] reg-fixed-voltage fixedregulator-vdd_3v3: Failed to resolve vin-supply for vdd_3v3 [ 1.803879] reg-fixed-voltage fixedregulator-vdd_3v3: Failed to resolve vin-supply for vdd_3v3 [ 1.813438] vdd_3v3: supplied by regen1 [ 1.817645] vtt_fixed: supplied by smps3 [ 1.826807] palmas-rtc 48070000.i2c:tps659038@58:tps659038_rtc: rtc core: registered 48070000.i2c:tps659 as rtc1 [ 1.839952] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 1.863759] rtc-ds1307 2-006f: SET TIME! [ 1.868613] rtc-ds1307 2-006f: rtc core: registered mcp7941x as rtc0 [ 1.875310] rtc-ds1307 2-006f: 64 bytes nvram [ 1.879909] omap_i2c 48060000.i2c: bus 2 rev0.12 at 400 kHz [ 1.887199] omap_hsmmc 4809c000.mmc: Got CD GPIO [ 1.992848] mmc1: MAN_BKOPS_EN bit is not set [ 1.997440] davinci_mdio 48485000.mdio: davinci mdio revision 1.6 [ 2.003843] davinci_mdio 48485000.mdio: detected phy mask fffffff9 [ 2.014566] libphy: 48485000.mdio: probed [ 2.018791] davinci_mdio 48485000.mdio: phy[1]: device 48485000.mdio:01, driver Micrel KSZ9031 Gigabit PHY [ 2.028927] davinci_mdio 48485000.mdio: phy[2]: device 48485000.mdio:02, driver Micrel KSZ9031 Gigabit PHY [ 2.039653] cpsw 48484000.ethernet: Detected MACID = 74:da:ea:08:33:f4 [ 2.047027] cpsw 48484000.ethernet: cpsw: Detected MACID = 74:da:ea:08:33:f5 [ 2.054454] mmc1: new high speed MMC card at address 0001 [ 2.060361] mmcblk0: mmc1:0001 S10004 3.56 GiB [ 2.065193] rtc-ds1307 2-006f: setting system clock to 2001-01-01 00:00:00 UTC (978307200) [ 2.078291] mmcblk0boot0: mmc1:0001 S10004 partition 1 4.00 MiB [ 2.084635] mmcblk0boot1: mmc1:0001 S10004 partition 2 4.00 MiB [ 2.084642] ldousb: disabling [ 2.094364] ALSA device list: [ 2.094708] mmcblk0: p1 [ 2.100138] No soundcards found. [ 2.104186] Waiting for root device /dev/mmcblk1p1...

[PYBOOT] [beagleboard-x15 01:39]: Timed out waiting for "<type 'str'>":

[PYBOOT] [beagleboard-x15 01:40]: got exception: timeout ~$off

[PYBOOT] [beagleboard-x15 01:41]: Done.

========================================================================

Board beagleboard-x15-arm-omap2plus_defconfig failure log: -------------------------------------------------

[ 2.339796] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@4809c000[0]' [ 2.349297] omap_hsmmc 4809c000.mmc: using lookup tables for GPIO lookup [ 2.356334] omap_hsmmc 4809c000.mmc: lookup for GPIO wp failed [ 2.400088] omap_hsmmc 480b4000.mmc: GPIO lookup for consumer cd [ 2.406394] omap_hsmmc 480b4000.mmc: using device tree for GPIO lookup [ 2.413266] of_get_named_gpiod_flags: can't parse 'cd-gpios' property of node '/ocp/mmc@480b4000[0]' [ 2.422869] of_get_named_gpiod_flags: can't parse 'cd-gpio' property of node '/ocp/mmc@480b4000[0]' [ 2.432366] omap_hsmmc 480b4000.mmc: using lookup tables for GPIO lookup [ 2.439414] omap_hsmmc 480b4000.mmc: lookup for GPIO cd failed [ 2.445531] omap_hsmmc 480b4000.mmc: GPIO lookup for consumer wp [ 2.451836] omap_hsmmc 480b4000.mmc: using device tree for GPIO lookup [ 2.458720] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@480b4000[0]' [ 2.468355] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@480b4000[0]' [ 2.477871] omap_hsmmc 480b4000.mmc: using lookup tables for GPIO lookup [ 2.484952] omap_hsmmc 480b4000.mmc: lookup for GPIO wp failed [ 2.574304] mmc1: MAN_BKOPS_EN bit is not set [ 2.579218] davinci_mdio 48485000.mdio: davinci mdio revision 1.6 [ 2.585628] davinci_mdio 48485000.mdio: detected phy mask fffffff9 [ 2.598696] libphy: 48485000.mdio: probed [ 2.602933] davinci_mdio 48485000.mdio: phy[1]: device 48485000.mdio:01, driver unknown [ 2.602954] mmc1: new high speed MMC card at address 0001 [ 2.617011] davinci_mdio 48485000.mdio: phy[2]: device 48485000.mdio:02, driver unknown [ 2.619481] mmcblk0: mmc1:0001 S10004 3.56 GiB [ 2.619837] mmcblk0boot0: mmc1:0001 S10004 partition 1 4.00 MiB [ 2.620169] mmcblk0boot1: mmc1:0001 S10004 partition 2 4.00 MiB [ 2.636626] mmcblk0: p1 [ 2.646173] cpsw 48484000.ethernet: Detected MACID = 74:da:ea:08:33:f4 [ 2.654813] cpsw 48484000.ethernet: cpsw: Detected MACID = 74:da:ea:08:33:f5 [ 2.663481] hctosys: unable to open rtc device (rtc0) [ 2.668784] sr_init: No PMIC hook to init smartreflex [ 2.674286] sr_init: platform driver register failed for SR [ 2.726135] ldousb: disabling [ 2.731976] Waiting for root device /dev/mmcblk1p1...

[PYBOOT] [beagleboard-x15 01:40]: Timed out waiting for "<type 'str'>":

[PYBOOT] [beagleboard-x15 01:41]: got exception: timeout ~$off

[PYBOOT] [beagleboard-x15 01:42]: Done.

========================================================================

Board beaver-arm-multi_v7_defconfig failure log: -------------------------------------------------

[ 3.913345] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 3.918933] r8169 0000:01:00.0: enabling device (0140 -> 0143) [ 3.925415] r8169 0000:01:00.0 eth0: RTL8168evl/8111evl at 0xf00e8000, 02:04:4b:01:60:99, XID 0c900800 IRQ 375 [ 3.935411] r8169 0000:01:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko] [ 3.947062] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 3.953704] [drm] No driver support for vblank timestamp query. [ 3.959639] drm drm: No connectors reported connected with modes [ 3.965648] [drm] Cannot find any crtc or sizes - going 1024x768 [ 3.991780] Console: switching to colour frame buffer device 128x48 [ 4.003770] drm drm: fb0: frame buffer device [ 4.008201] drm drm: registered panic notifier [ 4.023622] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 4.033709] utmi_phy_clk_enable: timeout waiting for phy to stabilize [ 4.040174] tegra-ehci 7d004000.usb: EHCI Host Controller [ 4.045583] tegra-ehci 7d004000.usb: new USB bus registered, assigned bus number 1 [ 4.054064] tegra-ehci 7d004000.usb: irq 343, io mem 0x7d004000 [ 4.068314] tegra-ehci 7d004000.usb: USB 2.0 started, EHCI 1.00 [ 4.074738] hub 1-0:1.0: USB hub found [ 4.078517] hub 1-0:1.0: 1 port detected [ 4.083248] tegra-ehci 7d008000.usb: EHCI Host Controller [ 4.088663] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 2 [ 4.096401] tegra-ehci 7d008000.usb: irq 344, io mem 0x7d008000 [ 4.108612] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.00 [ 4.114943] hub 2-0:1.0: USB hub found [ 4.118716] hub 2-0:1.0: 1 port detected [ 4.127422] tps65910-rtc tps65910-rtc: setting system clock to 2000-01-01 00:00:02 UTC (946684802) [ 4.141043] vdd_sata,avdd_plle: disabling [ 4.145498] usb1_vbus: disabling [ 4.148910] ALSA device list: [ 4.151867] #0: NVIDIA Tegra Beaver [ 4.156125] Waiting for root device /dev/mmcblk1p1... [ 4.428620] usb 2-1: new high-speed USB device number 2 using tegra-ehci [ 5.370488] asix 2-1:1.0 eth1: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 58:6d:8f:50:ba:18

[PYBOOT] [beaver 01:53]: Timed out waiting for "<type 'str'>":

[PYBOOT] [beaver 01:54]: got exception: timeout ~$off

[PYBOOT] [beaver 01:55]: Done.

========================================================================

Board beaver-arm-tegra_defconfig failure log: -------------------------------------------------

[ 3.872659] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 3.881807] utmi_phy_clk_enable: timeout waiting for phy to stabilize [ 3.888278] tegra-ehci 7d004000.usb: EHCI Host Controller [ 3.893703] tegra-ehci 7d004000.usb: new USB bus registered, assigned bus number 1 [ 3.901658] tegra-ehci 7d004000.usb: irq 343, io mem 0x7d004000 [ 3.902378] cfg80211: Calling CRDA to update world regulatory domain [ 3.932656] tegra-ehci 7d004000.usb: USB 2.0 started, EHCI 1.00 [ 3.939858] hub 1-0:1.0: USB hub found [ 3.943654] hub 1-0:1.0: 1 port detected [ 3.948415] tegra-ehci 7d008000.usb: EHCI Host Controller [ 3.953843] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 2 [ 3.961699] tegra-ehci 7d008000.usb: irq 344, io mem 0x7d008000 [ 3.982650] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.00 [ 3.989742] hub 2-0:1.0: USB hub found [ 3.993524] hub 2-0:1.0: 1 port detected [ 4.001603] tps65910-rtc tps65910-rtc: setting system clock to 2000-01-01 00:00:02 UTC (946684802) [ 4.020182] vdd_sata,avdd_plle: disabling [ 4.024694] usb1_vbus: disabling [ 4.028102] ALSA device list: [ 4.031059] #0: NVIDIA Tegra Beaver [ 4.035280] Waiting for root device /dev/mmcblk1p1... [ 4.312653] usb 2-1: new high-speed USB device number 2 using tegra-ehci [ 5.314864] asix 2-1:1.0 eth1: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 58:6d:8f:50:ba:18 [ 7.062360] cfg80211: Calling CRDA to update world regulatory domain [ 10.222348] cfg80211: Calling CRDA to update world regulatory domain [ 13.382366] cfg80211: Calling CRDA to update world regulatory domain [ 16.542346] cfg80211: Calling CRDA to update world regulatory domain [ 19.702346] cfg80211: Calling CRDA to update world regulatory domain [ 22.862346] cfg80211: Calling CRDA to update world regulatory domain [ 26.022353] cfg80211: Calling CRDA to update world regulatory domain [ 29.182346] cfg80211: Calling CRDA to update world regulatory domain [ 32.342346] cfg80211: Calling CRDA to update world regulatory domain [ 35.502344] cfg80211: Exceeded CRDA call max attempts. Not calling CRDA

[PYBOOT] [beaver 01:40]: Timed out waiting for "<type 'str'>":

[PYBOOT] [beaver 01:41]: got exception: timeout ~$off

[PYBOOT] [beaver 01:43]: Done.

========================================================================

Board dalmore-arm-multi_lpae_defconfig failure log: -------------------------------------------------

[ 2.968601] can: controller area network core (rev 20120528 abi 9) [ 2.975102] NET: Registered protocol family 29 [ 2.979667] can: raw protocol (rev 20120528) [ 2.984047] can: broadcast manager protocol (rev 20120528 t) [ 2.989834] can: netlink gateway (rev 20130117) max_hops=1 [ 2.996884] Key type dns_resolver registered [ 3.003218] ThumbEE CPU extension supported. [ 3.007631] Registering SWP/SWPB emulation handler [ 3.020782] usb1_vbus: supplied by vdd-sys-5v0 [ 3.027762] usb2_vbus: supplied by vdd-sys-5v0 [ 3.037539] VDD_5V0_HDMI_CON: supplied by vdd-sys-5v0 [ 3.054421] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 3.061216] [drm] No driver support for vblank timestamp query. [ 3.230800] Console: switching to colour frame buffer device 240x75 [ 3.317698] drm drm: fb0: frame buffer device [ 3.322224] drm drm: registered panic notifier [ 3.337531] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 3.349807] tegra-ehci 7d008000.usb: EHCI Host Controller [ 3.355399] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 1 [ 3.364090] tegra-ehci 7d008000.usb: irq 339, io mem 0x7d008000 [ 3.377525] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.10 [ 3.387070] hub 1-0:1.0: USB hub found [ 3.391167] hub 1-0:1.0: 1 port detected [ 3.401541] input: gpio-keys as /devices/soc0/gpio-keys/input/input1 [ 3.414047] palmas-rtc 7000d000.i2c:tps65913@58:rtc: setting system clock to 2000-01-01 00:00:01 UTC (946684801) [ 3.479083] dvdd_ts: disabling [ 3.482279] usb1_vbus: disabling [ 3.485574] vdd_cam_1v8_reg: disabling [ 3.490322] ALSA device list: [ 3.493433] #0: NVIDIA Tegra Dalmore [ 3.499685] Waiting for root device /dev/mmcblk1p1... [ 3.702596] usb 1-1: new high-speed USB device number 2 using tegra-ehci [ 4.674683] asix 1-1:1.0 eth0: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 48:f8:b3:2b:29:1f

[PYBOOT] [dalmore 02:03]: Timed out waiting for "<type 'str'>":

[PYBOOT] [dalmore 02:04]: got exception: timeout ~$off

[PYBOOT] [dalmore 02:05]: Done.

========================================================================

Board dalmore-arm-multi_v7_defconfig failure log: -------------------------------------------------

[ 2.968892] can: controller area network core (rev 20120528 abi 9) [ 2.975388] NET: Registered protocol family 29 [ 2.979954] can: raw protocol (rev 20120528) [ 2.984338] can: broadcast manager protocol (rev 20120528 t) [ 2.990129] can: netlink gateway (rev 20130117) max_hops=1 [ 2.997206] Key type dns_resolver registered [ 3.003505] ThumbEE CPU extension supported. [ 3.007918] Registering SWP/SWPB emulation handler [ 3.021104] usb1_vbus: supplied by vdd-sys-5v0 [ 3.028356] usb2_vbus: supplied by vdd-sys-5v0 [ 3.038399] VDD_5V0_HDMI_CON: supplied by vdd-sys-5v0 [ 3.055184] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 3.062039] [drm] No driver support for vblank timestamp query. [ 3.231670] Console: switching to colour frame buffer device 240x75 [ 3.318559] drm drm: fb0: frame buffer device [ 3.323084] drm drm: registered panic notifier [ 3.342384] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 3.354223] tegra-ehci 7d008000.usb: EHCI Host Controller [ 3.359801] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 1 [ 3.368521] tegra-ehci 7d008000.usb: irq 339, io mem 0x7d008000 [ 3.382329] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.10 [ 3.391838] hub 1-0:1.0: USB hub found [ 3.395916] hub 1-0:1.0: 1 port detected [ 3.406082] input: gpio-keys as /devices/soc0/gpio-keys/input/input1 [ 3.416434] palmas-rtc 7000d000.i2c:tps65913@58:rtc: setting system clock to 2000-01-01 00:00:01 UTC (946684801) [ 3.482409] dvdd_ts: disabling [ 3.485543] usb1_vbus: disabling [ 3.488849] vdd_cam_1v8_reg: disabling [ 3.493542] ALSA device list: [ 3.496534] #0: NVIDIA Tegra Dalmore [ 3.502983] Waiting for root device /dev/mmcblk1p1... [ 3.707431] usb 1-1: new high-speed USB device number 2 using tegra-ehci [ 4.679704] asix 1-1:1.0 eth0: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 48:f8:b3:2b:29:1f

[PYBOOT] [dalmore 01:51]: Timed out waiting for "<type 'str'>":

[PYBOOT] [dalmore 01:52]: got exception: timeout ~$off

[PYBOOT] [dalmore 01:53]: Done.

========================================================================

Board dalmore-arm-tegra_defconfig failure log: -------------------------------------------------

[ 2.884939] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 2.891752] [drm] No driver support for vblank timestamp query. [ 3.068199] Console: switching to colour frame buffer device 240x75 [ 3.155028] drm drm: fb0: frame buffer device [ 3.159504] drm drm: registered panic notifier [ 3.191945] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 3.200718] tegra-ehci 7d008000.usb: EHCI Host Controller [ 3.206451] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 1 [ 3.215766] tegra-ehci 7d008000.usb: irq 339, io mem 0x7d008000 [ 3.241865] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.10 [ 3.255518] hub 1-0:1.0: USB hub found [ 3.259536] hub 1-0:1.0: 1 port detected [ 3.273149] input: gpio-keys as /devices/soc0/gpio-keys/input/input1 [ 3.286568] palmas-rtc 7000d000.i2c:tps65913@58:rtc: setting system clock to 2000-01-01 00:00:01 UTC (946684801) [ 3.378355] dvdd_ts: disabling [ 3.381458] usb1_vbus: disabling [ 3.384843] vdd_cam_1v8_reg: disabling [ 3.389564] ALSA device list: [ 3.392630] #0: NVIDIA Tegra Dalmore [ 3.398345] Waiting for root device /dev/mmcblk1p1... [ 3.581955] usb 1-1: new high-speed USB device number 2 using tegra-ehci [ 4.341868] cfg80211: Calling CRDA to update world regulatory domain [ 4.615652] asix 1-1:1.0 eth0: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 48:f8:b3:2b:29:1f [ 7.501761] cfg80211: Calling CRDA to update world regulatory domain [ 10.661918] cfg80211: Calling CRDA to update world regulatory domain [ 13.821901] cfg80211: Calling CRDA to update world regulatory domain [ 16.981869] cfg80211: Calling CRDA to update world regulatory domain [ 20.141934] cfg80211: Calling CRDA to update world regulatory domain [ 23.301894] cfg80211: Calling CRDA to update world regulatory domain [ 26.461869] cfg80211: Calling CRDA to update world regulatory domain [ 29.621854] cfg80211: Calling CRDA to update world regulatory domain [ 32.781877] cfg80211: Calling CRDA to update world regulatory domain [ 35.941892] cfg80211: Exceeded CRDA call max attempts. Not calling CRDA

[PYBOOT] [dalmore 01:45]: Timed out waiting for "<type 'str'>":

[PYBOOT] [dalmore 01:46]: got exception: timeout ~$off

[PYBOOT] [dalmore 01:48]: Done.

========================================================================

Board hummingboard-arm-imx_v6_v7_defconfig failure log: -------------------------------------------------

[ 1.692787] imx-sgtl5000 sound-sgtl5000: snd_soc_register_card failed (-517) [ 1.702770] imx-spdif sound-spdif: snd-soc-dummy-dai <-> 2004000.spdif mapping ok [ 1.718502] NET: Registered protocol family 10 [ 1.727423] sit: IPv6 over IPv4 tunneling driver [ 1.734584] NET: Registered protocol family 17 [ 1.739138] mmc0: host does not support reading read-only switch, assuming write-enable [ 1.747264] can: controller area network core (rev 20120528 abi 9) [ 1.756816] NET: Registered protocol family 29 [ 1.762423] mmc0: new high speed SDHC card at address b368 [ 1.769231] can: raw protocol (rev 20120528) [ 1.773666] can: broadcast manager protocol (rev 20120528 t) [ 1.780344] mmcblk0: mmc0:b368 00000 7.51 GiB [ 1.786348] can: netlink gateway (rev 20130117) max_hops=1 [ 1.794808] mmcblk0: p1 p2 [ 1.798701] Key type dns_resolver registered [ 1.810704] Registering SWP/SWPB emulation handler [ 1.823737] imx-sgtl5000 sound-sgtl5000: ASoC: CODEC DAI sgtl5000 not registered [ 1.831213] imx-sgtl5000 sound-sgtl5000: snd_soc_register_card failed (-517) [ 1.840813] snvs_rtc 20cc034.snvs-rtc-lp: setting system clock to 1970-01-01 00:00:00 UTC (0) [ 1.888877] ALSA device list: [ 1.891944] #0: On-board SPDIF [ 1.896820] Waiting for root device /dev/mmcblk1p2... [ 3.310736] cfg80211: Calling CRDA to update world regulatory domain [ 6.469267] cfg80211: Calling CRDA to update world regulatory domain [ 9.629260] cfg80211: Calling CRDA to update world regulatory domain [ 12.789286] cfg80211: Calling CRDA to update world regulatory domain [ 15.949260] cfg80211: Calling CRDA to update world regulatory domain [ 19.109249] cfg80211: Calling CRDA to update world regulatory domain [ 22.269244] cfg80211: Calling CRDA to update world regulatory domain [ 25.429251] cfg80211: Calling CRDA to update world regulatory domain [ 28.589249] cfg80211: Calling CRDA to update world regulatory domain [ 31.749252] cfg80211: Calling CRDA to update world regulatory domain [ 34.909241] cfg80211: Exceeded CRDA call max attempts. Not calling CRDA

[PYBOOT] [hummingboard 01:42]: Timed out waiting for "<type 'str'>":

[PYBOOT] [hummingboard 01:43]: got exception: timeout ~$off

[PYBOOT] [hummingboard 01:44]: Done.

========================================================================

Board hummingboard-arm-multi_v7_defconfig failure log: -------------------------------------------------

[ 1.207020] gspca_main: v2.14.0 registered [ 1.215469] sdhci: Secure Digital Host Controller Interface driver [ 1.221689] sdhci: Copyright(c) Pierre Ossman [ 1.227586] Synopsys Designware Multimedia Card Interface Driver [ 1.234749] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.241204] /soc/aips-bus@02100000/usdhc@02194000: voltage-ranges unspecified [ 1.248401] sdhci-esdhc-imx 2194000.usdhc: Got CD GPIO [ 1.253589] sdhci-esdhc-imx 2194000.usdhc: could not get ultra high speed state, work on normal mode [ 1.263117] sdhci-esdhc-imx 2194000.usdhc: No vqmmc regulator found [ 1.301932] mmc0: SDHCI controller on 2194000.usdhc [2194000.usdhc] using ADMA [ 1.310791] ledtrig-cpu: registered to indicate activity on CPUs [ 1.317088] usbcore: registered new interface driver usbhid [ 1.322695] usbhid: USB HID core driver [ 1.330199] usbcore: registered new interface driver snd-usb-audio [ 1.341376] NET: Registered protocol family 17 [ 1.345897] can: controller area network core (rev 20120528 abi 9) [ 1.352176] NET: Registered protocol family 29 [ 1.356640] can: raw protocol (rev 20120528) [ 1.360948] can: broadcast manager protocol (rev 20120528 t) [ 1.366648] can: netlink gateway (rev 20130117) max_hops=1 [ 1.372571] Key type dns_resolver registered [ 1.377017] ThumbEE CPU extension supported. [ 1.381312] Registering SWP/SWPB emulation handler [ 1.395042] imx-gpc 20dc000.gpc: failed to get pu regulator: -517 [ 1.406893] hctosys: unable to open rtc device (rtc0) [ 1.421229] ALSA device list: [ 1.424270] No soundcards found. [ 1.428365] Waiting for root device /dev/mmcblk1p2... [ 1.464358] mmc0: host does not support reading read-only switch, assuming write-enable [ 1.478407] mmc0: new high speed SDHC card at address b368 [ 1.484280] mmcblk0: mmc0:b368 00000 7.51 GiB [ 1.490200] mmcblk0: p1 p2 [ 1.493918] imx-gpc 20dc000.gpc: failed to get pu regulator: -517

[PYBOOT] [hummingboard 01:41]: Timed out waiting for "<type 'str'>":

[PYBOOT] [hummingboard 01:42]: got exception: timeout ~$off

[PYBOOT] [hummingboard 01:43]: Done.

========================================================================

Board odroidu3-arm-exynos_defconfig failure log: -------------------------------------------------

[ 1.521652] NET: Registered protocol family 15 [ 1.526189] Registering SWP/SWPB emulation handler [ 1.532183] s3c-rtc 10070000.rtc: rtc disabled, re-enabling [ 1.536425] s3c-rtc 10070000.rtc: warning: invalid RTC value so initializing it [ 1.543871] s3c-rtc 10070000.rtc: rtc core: registered s3c as rtc1 [ 1.550843] input: gpio_keys as /devices/platform/gpio_keys/input/input0 [ 1.573678] mmc1: MAN_BKOPS_EN bit is not set [ 1.574937] mmc_host mmc1: Bus speed (slot 0) = 44000000Hz (slot req 52000000Hz, actual 44000000HZ div = 0) [ 1.582272] mmc_host mmc1: Bus speed (slot 0) = 73333333Hz (slot req 52000000Hz, actual 36666666HZ div = 1) [ 1.591841] max77686-rtc max77686-rtc: setting system clock to 2000-01-01 01:00:19 UTC (946688419) [ 1.601053] mmc1: new DDR MMC card at address 0001 [ 1.605996] mmcblk0: mmc1:0001 008G92 7.28 GiB [ 1.606785] VDD10_HDMI_1.0V: disabling [ 1.607455] vdd_g3d: disabling [ 1.608107] BUCK8_2.8V: disabling [ 1.609440] ALSA device list: [ 1.609443] No soundcards found. [ 1.626541] mmcblk0boot0: mmc1:0001 008G92 partition 1 4.00 MiB [ 1.632438] mmcblk0boot1: mmc1:0001 008G92 partition 2 4.00 MiB [ 1.638321] mmcblk0rpmb: mmc1:0001 008G92 partition 3 512 KiB [ 1.644919] mmcblk0: p1 p2 [ 1.648819] Waiting for root device /dev/mmcblk1p2... [ 3.341131] cfg80211: Calling CRDA to update world regulatory domain [ 6.491125] cfg80211: Calling CRDA to update world regulatory domain [ 9.641126] cfg80211: Calling CRDA to update world regulatory domain [ 12.791125] cfg80211: Calling CRDA to update world regulatory domain [ 15.941125] cfg80211: Calling CRDA to update world regulatory domain [ 19.091125] cfg80211: Calling CRDA to update world regulatory domain [ 22.241125] cfg80211: Calling CRDA to update world regulatory domain [ 25.391125] cfg80211: Calling CRDA to update world regulatory domain [ 28.541125] cfg80211: Calling CRDA to update world regulatory domain [ 31.691125] cfg80211: Calling CRDA to update world regulatory domain [ 34.841125] cfg80211: Exceeded CRDA call max attempts. Not calling CRDA

[PYBOOT] [odroidu3 02:02]: Timed out waiting for "<type 'str'>":

[PYBOOT] [odroidu3 02:03]: got exception: timeout ~$off

[PYBOOT] [odroidu3 02:04]: Done.

========================================================================

Board odroidu3-arm-multi_v7_defconfig failure log: -------------------------------------------------

[ 1.462039] dwmmc_exynos 12550000.mmc: 1 slots initialized [ 1.462556] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.468668] ledtrig-cpu: registered to indicate activity on CPUs [ 1.473657] usbcore: registered new interface driver usbhid [ 1.479056] usbhid: USB HID core driver [ 1.485264] usbcore: registered new interface driver snd-usb-audio [ 1.491236] NET: Registered protocol family 17 [ 1.493471] can: controller area network core (rev 20120528 abi 9) [ 1.499665] NET: Registered protocol family 29 [ 1.504047] can: raw protocol (rev 20120528) [ 1.508290] can: broadcast manager protocol (rev 20120528 t) [ 1.513932] can: netlink gateway (rev 20130117) max_hops=1 [ 1.519652] Key type dns_resolver registered [ 1.523810] ThumbEE CPU extension supported. [ 1.527900] Registering SWP/SWPB emulation handler [ 1.534434] input: gpio_keys as /devices/platform/gpio_keys/input/input0 [ 1.562531] max77686-rtc max77686-rtc: setting system clock to 2000-01-01 01:00:20 UTC (946688420) [ 1.574961] VDD10_HDMI_1.0V: disabling [ 1.575617] VDDQ_MIPIHSI_1.8V: disabling [ 1.577590] vdd_g3d: disabling [ 1.580608] BUCK8_2.8V: disabling [ 1.584638] mmc1: MAN_BKOPS_EN bit is not set [ 1.585135] ALSA device list: [ 1.585137] No soundcards found. [ 1.594513] Waiting for root device /dev/mmcblk1p2... [ 1.599665] mmc_host mmc1: Bus speed (slot 0) = 44000000Hz (slot req 52000000Hz, actual 44000000HZ div = 0) [ 1.608860] mmc_host mmc1: Bus speed (slot 0) = 73333333Hz (slot req 52000000Hz, actual 36666666HZ div = 1) [ 1.618705] mmc1: new DDR MMC card at address 0001 [ 1.623533] mmcblk0: mmc1:0001 008G92 7.28 GiB [ 1.627820] mmcblk0boot0: mmc1:0001 008G92 partition 1 4.00 MiB [ 1.633698] mmcblk0boot1: mmc1:0001 008G92 partition 2 4.00 MiB [ 1.639596] mmcblk0rpmb: mmc1:0001 008G92 partition 3 512 KiB [ 1.646086] mmcblk0: p1 p2

[PYBOOT] [odroidu3 01:48]: Timed out waiting for "<type 'str'>":

[PYBOOT] [odroidu3 01:49]: got exception: timeout ~$off

[PYBOOT] [odroidu3 01:50]: Done.

========================================================================

Board seaboard-arm-multi_v7_defconfig failure log: -------------------------------------------------

[ 1.910741] can: broadcast manager protocol (rev 20120528 t) [ 1.916414] can: netlink gateway (rev 20130117) max_hops=1 [ 1.921933] mmc0: queuing unknown CIS tuple 0x80 (7 bytes) [ 1.922273] Key type dns_resolver registered [ 1.922578] ThumbEE CPU extension supported. [ 1.922595] Registering SWP/SWPB emulation handler [ 1.943726] mmc0: queuing unknown CIS tuple 0x80 (7 bytes) [ 1.944228] tegra-dc 54200000.dc: failed to probe RGB output: -517 [ 1.945282] 54280000.hdmi supply hdmi not found, using dummy regulator [ 1.949255] utmi_phy_clk_enable: timeout waiting for phy to stabilize [ 1.949279] tegra-ehci c5000000.usb: EHCI Host Controller [ 1.949304] tegra-ehci c5000000.usb: new USB bus registered, assigned bus number 3 [ 1.949559] tegra-ehci c5000000.usb: irq 287, io mem 0xc5000000 [ 1.960810] tegra-ehci c5000000.usb: USB 2.0 started, EHCI 1.00 [ 1.961516] hub 3-0:1.0: USB hub found [ 1.961551] hub 3-0:1.0: 1 port detected [ 2.004604] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 2.010644] mmc0: queuing unknown CIS tuple 0x80 (19 bytes) [ 2.016797] [drm] No driver support for vblank timestamp query. [ 2.030476] mmc0: queuing unknown CIS tuple 0x02 (1 bytes) [ 2.041310] mmc0: new SDIO card at address 0001 [ 2.095514] Console: switching to colour frame buffer device 170x48 [ 2.124357] drm drm: fb0: frame buffer device [ 2.128822] drm drm: registered panic notifier [ 2.145837] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 2.153153] input: gpio-keys as /devices/soc0/gpio-keys/input/input4 [ 2.160370] tps6586x-rtc tps6586x-rtc: setting system clock to 2009-01-01 00:00:00 UTC (1230768000) [ 2.176681] vdd_1v5: disabling [ 2.179738] vdd_1v2: disabling [ 2.182996] ALSA device list: [ 2.185986] #0: NVIDIA Tegra Seaboard [ 2.626212] asix 2-1:1.0 eth0: register 'asix' at usb-c5008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, c0:c1:c0:13:08:60 [ 2.637078] Waiting for root device /dev/mmcblk2p3...

[PYBOOT] [seaboard 02:46]: Timed out waiting for "<type 'str'>":

[PYBOOT] [seaboard 02:47]: got exception: timeout ~$off

[PYBOOT] [seaboard 02:48]: Done.

========================================================================

Board seaboard-arm-tegra_defconfig failure log: -------------------------------------------------

[ 1.858550] tegra-ehci c5000000.usb: new USB bus registered, assigned bus number 3 [ 1.866499] mmc0: queuing unknown CIS tuple 0x80 (19 bytes) [ 1.866603] tegra-ehci c5000000.usb: irq 287, io mem 0xc5000000 [ 1.886527] tegra-ehci c5000000.usb: USB 2.0 started, EHCI 1.00 [ 1.895175] hub 3-0:1.0: USB hub found [ 1.899057] hub 3-0:1.0: 1 port detected [ 1.911077] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 1.917771] [drm] No driver support for vblank timestamp query. [ 1.926058] mmc0: queuing unknown CIS tuple 0x02 (1 bytes) [ 1.937836] mmc0: new SDIO card at address 0001 [ 2.026771] Console: switching to colour frame buffer device 170x48 [ 2.049847] drm drm: fb0: frame buffer device [ 2.054284] drm drm: registered panic notifier [ 2.086537] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 2.093955] input: gpio-keys as /devices/soc0/gpio-keys/input/input4 [ 2.101752] tps6586x-rtc tps6586x-rtc: setting system clock to 2009-01-01 00:00:00 UTC (1230768000) [ 2.123387] vdd_1v5: disabling [ 2.126441] vdd_1v2: disabling [ 2.129660] ALSA device list: [ 2.132633] #0: NVIDIA Tegra Seaboard [ 2.491413] asix 2-1:1.0 eth0: register 'asix' at usb-c5008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, c0:c1:c0:13:08:60 [ 2.502536] Waiting for root device /dev/mmcblk2p3... [ 3.766666] cfg80211: Calling CRDA to update world regulatory domain [ 6.926632] cfg80211: Calling CRDA to update world regulatory domain [ 10.086641] cfg80211: Calling CRDA to update world regulatory domain [ 13.246629] cfg80211: Calling CRDA to update world regulatory domain [ 16.406630] cfg80211: Calling CRDA to update world regulatory domain [ 19.566615] cfg80211: Calling CRDA to update world regulatory domain [ 22.726656] cfg80211: Calling CRDA to update world regulatory domain [ 25.886625] cfg80211: Calling CRDA to update world regulatory domain [ 29.046623] cfg80211: Calling CRDA to update world regulatory domain [ 32.206791] cfg80211: Calling CRDA to update world regulatory domain [ 35.366629] cfg80211: Exceeded CRDA call max attempts. Not calling CRDA

[PYBOOT] [seaboard 01:45]: Timed out waiting for "<type 'str'>":

[PYBOOT] [seaboard 01:46]: got exception: timeout ~$off

[PYBOOT] [seaboard 01:48]: Done.

========================================================================

Board seattle-arm64-nosmp_defconfig failure log: -------------------------------------------------

NBP filename is grubaa64.efi NBP filesize is 841728 Bytes

...

Checking Media Presence...... Media Present......

Downloading NBP file...

Succeed to download NBP file.  Minimal BASH-like line editing is supported. For the first word, TAB lists possible command completions. Anywhere else TAB lists possible device or file completions.

grub> [PYBOOT] [seattle 01:15]: grub: taking control.

[PYBOOT] [seattle 01:15]: before linux load linux stable-rc/v4.1.26/arm64-nosmp_defconfig/Image root=/dev/sda5 rootwait ro linux stable-rc/v4.1.26/arm64-nosmp_defconfig/Image root=/dev/sda5 rootwa i t ro grub> [PYBOOT] [seattle 01:35]: after linux load

grub> [PYBOOT] [seattle 01:36]: before dtb load

[PYBOOT] [seattle 01:36]: after dtb load boot boot EFI stub: Booting Linux Kernel... EFI stub: Using DTB from configuration table EFI stub: Exiting boot services and installing virtual address map...

[PYBOOT] [seattle 02:56]: Timed out waiting for "<type 'str'>":

[PYBOOT] [seattle 02:57]: got exception: timeout ~$off

[PYBOOT] [seattle 02:58]: Done.

========================================================================

Board snowball-arm-multi_v7_defconfig failure log: -------------------------------------------------

[ 1.877410] usbcore: registered new interface driver usbhid [ 1.883026] usbhid: USB HID core driver [ 1.890655] usbcore: registered new interface driver snd-usb-audio [ 1.899536] NET: Registered protocol family 17 [ 1.904052] can: controller area network core (rev 20120528 abi 9) [ 1.910308] NET: Registered protocol family 29 [ 1.914794] can: raw protocol (rev 20120528) [ 1.919067] can: broadcast manager protocol (rev 20120528 t) [ 1.924774] can: netlink gateway (rev 20130117) max_hops=1 [ 1.930725] Key type dns_resolver registered [ 1.935180] ThumbEE CPU extension supported. [ 1.939483] Registering SWP/SWPB emulation handler [ 1.946990] input: gpio_keys as /devices/soc0/gpio_keys/input/input0 [ 1.953765] rtc-pl031 80154000.rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800) [ 1.962921] thermal cooling_device0: thermal-cpufreq-0 bind to 0: 0-succeed [ 1.969940] mmc3: new high speed MMC card at address 0001 [ 1.969970] thermal cooling_device0: thermal-cpufreq-0 bind to 1: 0-succeed [ 1.969970] thermal cooling_device0: thermal-cpufreq-0 bind to 2: 0-succeed [ 1.970001] db8500-cpufreq-cooling soc:cpufreq-cooling: Cooling device registered: thermal-cpufreq-0 [ 1.974395] db8500-esram12: disabling [ 1.974487] db8500-esram34: disabling [ 1.974792] V-CSI/DSI: disabling [ 1.974853] mmci-reg: disabling [ 1.975006] ALSA device list: [ 1.975006] No soundcards found. [ 2.018768] uart-pl011 80007000.uart: DMA channel TX dma0chan20 [ 2.019378] mmcblk0: mmc3:0001 3.53 GiB [ 2.019500] mmcblk0boot0: mmc3:0001 partition 1 2.00 MiB [ 2.019653] mmcblk0boot1: mmc3:0001 partition 2 2.00 MiB [ 2.019775] mmcblk0rpmb: mmc3:0001 partition 3 128 KiB [ 2.039672] mmcblk0: p1 p2 p3 p4 [ 2.048217] uart-pl011 80007000.uart: DMA channel RX dma0chan21 [ 2.054473] Waiting for root device /dev/mmcblk3p4...

[PYBOOT] [snowball 02:11]: Timed out waiting for "<type 'str'>":

[PYBOOT] [snowball 02:12]: got exception: timeout ~$off

[PYBOOT] [snowball 02:14]: Done.

========================================================================

Board snowball-arm-u8500_defconfig failure log: -------------------------------------------------

[ 2.509429] Registering SWP/SWPB emulation handler [ 2.517730] input: gpio_keys as /devices/soc0/gpio_keys/input/input1 [ 2.524810] ab8500-rtc ab8500-rtc.0: setting system clock to 2000-01-31 22:51:43 UTC (949359103) [ 2.533996] thermal cooling_device0: thermal-cpufreq-0 bind to 0: 0-succeed [ 2.541046] thermal cooling_device0: thermal-cpufreq-0 bind to 1: 0-succeed [ 2.548034] thermal cooling_device0: thermal-cpufreq-0 bind to 2: 0-succeed [ 2.555084] db8500-cpufreq-cooling soc:cpufreq-cooling: Cooling device registered: thermal-cpufreq-0 [ 2.568908] db8500-esram12: disabling [ 2.572692] db8500-esram34: disabling [ 2.576568] V-CSI/DSI: disabling [ 2.579833] mmci-reg: disabling [ 2.583190] ALSA device list: [ 2.586181] #0: MOP500-card [ 2.589447] uart-pl011 80007000.uart: DMA channel TX dma0chan24 [ 2.595428] uart-pl011 80007000.uart: DMA channel RX dma0chan25 [ 2.601623] Waiting for root device /dev/mmcblk3p4... [ 4.201293] cfg80211: Calling CRDA to update world regulatory domain [ 7.361297] cfg80211: Calling CRDA to update world regulatory domain [ 10.521301] cfg80211: Calling CRDA to update world regulatory domain [ 13.681274] cfg80211: Calling CRDA to update world regulatory domain [ 16.841308] cfg80211: Calling CRDA to update world regulatory domain [ 20.001312] cfg80211: Calling CRDA to update world regulatory domain [ 23.161315] cfg80211: Calling CRDA to update world regulatory domain [ 26.321289] cfg80211: Calling CRDA to update world regulatory domain [ 29.481292] cfg80211: Calling CRDA to update world regulatory domain [ 32.641296] cfg80211: Calling CRDA to update world regulatory domain [ 35.801300] cfg80211: Exceeded CRDA call max attempts. Not calling CRDA Connected. cu: Got hangup signal cu: waitpid: No child processes Connected.

Disconnected.

[PYBOOT] [snowball 01:56]: Timed out waiting for "<type 'str'>":

[PYBOOT] [snowball 01:57]: got exception: timeout ~$off

[PYBOOT] [snowball 01:58]: Done.