Failed boards:
beaver tegra_defconfig : FAILED 1:03.90 capri bcm_defconfig : FAILED 1:02.98 cubie sunxi_defconfig : FAILED 1:05.33 cubie multi_v7_defconfig : FAILED 1:00.77 cubie2 sunxi_defconfig : FAILED 1:00.01 cubie2 multi_v7_defconfig : FAILED 1:01.68 cubie2 multi_lpae_defconfig : FAILED 0:58.75 dalmore tegra_defconfig : FAILED 1:09.44 panda multi_v7_defconfig : FAILED 1:35.41 seaboard tegra_defconfig : FAILED 1:09.85 snowball multi_v7_defconfig : FAILED 1:08.39 trimslice tegra_defconfig : FAILED 1:07.78
Successful boards:
apc vt8500_v6_v7_defconfig : passed 1:16.05 arndale exynos_defconfig : passed 1:07.83 bbb omap2plus_defconfig : passed 1:34.57 bbb multi_v7_defconfig : passed 1:24.49 beaver multi_v7_defconfig : passed 0:48.15 capri multi_v7_defconfig : passed 0:44.59 dalmore multi_v7_defconfig : passed 1:17.10 dalmore multi_lpae_defconfig : passed 1:16.70 hummingboard imx_v6_v7_defconfig : passed 1:25.40 hummingboard multi_v7_defconfig : passed 1:08.42 omap5uevm omap2plus_defconfig : passed 1:11.72 omap5uevm multi_v7_defconfig : passed 1:44.62 omap5uevm multi_lpae_defconfig : passed 1:37.44 panda omap2plus_defconfig : warnings 1:14.07 sama5 sama5_defconfig : passed 1:51.04 seaboard multi_v7_defconfig : passed 1:08.19 snow exynos_defconfig : passed 1:53.03 snowball u8500_defconfig : passed 2:09.61 trimslice multi_v7_defconfig : passed 0:55.36 wandboard imx_v6_v7_defconfig : passed 1:00.07 wandboard multi_v7_defconfig : passed 1:01.51
Offline boards:
Board legend is available at http://arm-soc.lixom.net/boards.html
Last entries of failed logs below:
========================================================================
Board beaver-tegra_defconfig failure log: -------------------------------------------------
tftp 0x82000000 next/next-20140515/tegra_defconfig/zImage Using asx0 device TFTP from server 172.16.1.3; our IP address is 172.16.1.108 Filename 'next/next-20140515/tegra_defconfig/zImage'. Load address: 0x82000000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ####################################### 3.3 MiB/s done Bytes transferred = 4377496 (42cb98 hex) Tegra30 (Beaver) # setenv serverip 172.16.1.3 setenv serverip 172.16.1.3 Tegra30 (Beaver) # tftp 0x83000000 next/next-20140515/tegra_defconfig/dtbs/tegra30-beaver.dtb tftp 0x83000000 next/next-20140515/tegra_defconfig/dtbs/tegra30-beaver.dtb Using asx0 device TFTP from server 172.16.1.3; our IP address is 172.16.1.108 Filename 'next/next-20140515/tegra_defconfig/dtbs/tegra30-beaver.dtb'. Load address: 0x83000000 Loading: *## 454.1 KiB/s done Bytes transferred = 24197 (5e85 hex) Tegra30 (Beaver) # printenv bootargs printenv bootargs bootargs=console=ttyS0,115200 earlyprintk debug root=/dev/mmcblk0p1 rootwait Tegra30 (Beaver) # bootz 0x82000000 - 0x83000000 bootz 0x82000000 - 0x83000000 Kernel image @ 0x82000000 [ 0x000000 - 0x42cb98 ] ## Flattened Device Tree blob at 83000000 Booting using the fdt blob at 0x83000000 Loading Device Tree to 8fff7000, end 8ffffe84 ... OK
Starting kernel ...
Uncompressing Linux... done, booting the kernel. ~$off # PYBOOT: Exception: timeout
========================================================================
Board capri-bcm_defconfig failure log: -------------------------------------------------
bcm_defconfig/zImage next/next-20140515/bcm_defconfig/dtbs/bcm28155-ap.dtb (user:build) Load fastboot kernel GET_DESC ->STRING DESC sending 'kernel' (2401 KB)... ...........................................................................OKAY [ 0.492s] writing 'kernel'...
downloading of 2459224 bytes finished Flashing Raw Image Writing to partition 'kernel' WriOKAY [ 0.679s] finished. total time: 1.170s ting 'kernel' DONE! GET_DESC ->STRING DESC sending 'device-tree' (7 KB)...
downloaOKAY [ 0.009s] writing 'device-tree'... ding of 7575 bytes finished Flashing Raw Image Writing to partition 'device-tree' Writing 'devicOKAY [ 0.009s] finished. total time: 0.018s e-tree' DONE! GET_DESC ->STRING DESC resuming boot... OKAY [ 0.002s] finished. total time: 0.002s
MMC read: dev # 0, block # 72320, count 16384 ... 16384 blocks read: OK
MMC read: dev # 0, block # 114688, count 32768 ... 32768 blocks read: OK ## Flattened Device Tree blob at 9e000000 Booting using the fdt blob at 0x9e000000 Using Device Tree in place at 9e000000, end 9e004d96
Starting kernel ...
~$off # PYBOOT: Exception: timeout
========================================================================
Board cubie-multi_v7_defconfig failure log: -------------------------------------------------
sun4i#tftp 0x42000000 next/next-20140515/multi_v7_defconfig/zImage tftp 0x42000000 next/next-20140515/multi_v7_defconfig/zImage Using emac device TFTP from server 172.16.1.3; our IP address is 172.16.1.139 Filename 'next/next-20140515/multi_v7_defconfig/zImage'. Load address: 0x42000000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ########################################################### 2.9 MiB/s done Bytes transferred = 4668648 (473ce8 hex) sun4i#setenv serverip 172.16.1.3 setenv serverip 172.16.1.3 sun4i#tftp 0x48000000 next/next-20140515/multi_v7_defconfig/dtbs/sun4i-a10-cubieboard.dtb tftp 0x48000000 next/next-20140515/multi_v7_defconfig/dtbs/sun4i-a10-cubieboard.dtb Using emac device TFTP from server 172.16.1.3; our IP address is 172.16.1.139 Filename 'next/next-20140515/multi_v7_defconfig/dtbs/sun4i-a10-cubieboard.dtb'. Load address: 0x48000000 Loading: *## 529.3 KiB/s done Bytes transferred = 15184 (3b50 hex) sun4i#printenv bootargs printenv bootargs bootargs=console=ttyS0,115200n8 root=/dev/nfs rootwait rw nfsroot=172.16.1.7:/work/nfsroot/cubie ip=dhcp sun4i#bootz 0x42000000 - 0x48000000 bootz 0x42000000 - 0x48000000 Kernel image @ 0x42000000 [ 0x000000 - 0x473ce8 ] ## Flattened Device Tree blob at 48000000 Booting using the fdt blob at 0x48000000 Loading Device Tree to 40ff9000, end 40fffb4f ... OK
Starting kernel ...
~$off # PYBOOT: Exception: timeout
========================================================================
Board cubie-sunxi_defconfig failure log: -------------------------------------------------
DHCP client bound to address 172.16.1.139 sun4i#setenv serverip 172.16.1.3 setenv serverip 172.16.1.3 sun4i#tftp 0x42000000 next/next-20140515/sunxi_defconfig/zImage tftp 0x42000000 next/next-20140515/sunxi_defconfig/zImage Using emac device TFTP from server 172.16.1.3; our IP address is 172.16.1.139 Filename 'next/next-20140515/sunxi_defconfig/zImage'. Load address: 0x42000000 Loading: *################################################################# ############################################################# 2.8 MiB/s done Bytes transferred = 1845608 (1c2968 hex) sun4i#setenv serverip 172.16.1.3 setenv serverip 172.16.1.3 sun4i#tftp 0x48000000 next/next-20140515/sunxi_defconfig/dtbs/sun4i-a10-cubieboard.dtb tftp 0x48000000 next/next-20140515/sunxi_defconfig/dtbs/sun4i-a10-cubieboard.dtb Using emac device TFTP from server 172.16.1.3; our IP address is 172.16.1.139 Filename 'next/next-20140515/sunxi_defconfig/dtbs/sun4i-a10-cubieboard.dtb'. Load address: 0x48000000 Loading: *## 570.3 KiB/s done Bytes transferred = 15184 (3b50 hex) sun4i#printenv bootargs printenv bootargs bootargs=console=ttyS0,115200n8 root=/dev/nfs rootwait rw nfsroot=172.16.1.7:/work/nfsroot/cubie ip=dhcp sun4i#bootz 0x42000000 - 0x48000000 bootz 0x42000000 - 0x48000000 Kernel image @ 0x42000000 [ 0x000000 - 0x1c2968 ] ## Flattened Device Tree blob at 48000000 Booting using the fdt blob at 0x48000000 Loading Device Tree to 40ff9000, end 40fffb4f ... OK
Starting kernel ...
~$off # PYBOOT: Exception: timeout
========================================================================
Board cubie2-multi_lpae_defconfig failure log: -------------------------------------------------
sun7i# tftp 0x42000000 next/next-20140515/multi_lpae_defconfig/zImage tftp 0x42000000 next/next-20140515/multi_lpae_defconfig/zImage Using emac device TFTP from server 172.16.1.3; our IP address is 172.16.1.116 Filename 'next/next-20140515/multi_lpae_defconfig/zImage'. Load address: 0x42000000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ############################################################ 4.3 MiB/s done Bytes transferred = 4691800 (479758 hex) sun7i# setenv serverip 172.16.1.3 setenv serverip 172.16.1.3 sun7i# tftp 0x44000000 next/next-20140515/multi_lpae_defconfig/dtbs/sun7i-a20-cubieboard2.dtb tftp 0x44000000 next/next-20140515/multi_lpae_defconfig/dtbs/sun7i-a20-cubieboard2.dtb Using emac device TFTP from server 172.16.1.3; our IP address is 172.16.1.116 Filename 'next/next-20140515/multi_lpae_defconfig/dtbs/sun7i-a20-cubieboard2.dtb'. Load address: 0x44000000 Loading: *## 3.5 MiB/s done Bytes transferred = 18501 (4845 hex) sun7i# printenv bootargs printenv bootargs bootargs=console=ttyS0,115200n8 root=/dev/nfs rootwait rw nfsroot=172.16.1.7:/work/nfsroot/cubie2 ip=dhcp sun7i# bootz 0x42000000 - 0x44000000 bootz 0x42000000 - 0x44000000 Kernel image @ 0x42000000 [ 0x000000 - 0x479758 ] ## Flattened Device Tree blob at 44000000 Booting using the fdt blob at 0x44000000 Loading Device Tree to 40ff8000, end 40fff844 ... OK
Starting kernel ...
~$off # PYBOOT: Exception: timeout
========================================================================
Board cubie2-multi_v7_defconfig failure log: -------------------------------------------------
tftp 0x42000000 next/next-20140515/multi_v7_defconfig/zImage Using emac device TFTP from server 172.16.1.3; our IP address is 172.16.1.116 Filename 'next/next-20140515/multi_v7_defconfig/zImage'. Load address: 0x42000000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ########################################################### 4.4 MiB/s done Bytes transferred = 4668648 (473ce8 hex) sun7i# setenv serverip 172.16.1.3 setenv serverip 172.16.1.3 sun7i# tftp 0x44000000 next/next-20140515/multi_v7_defconfig/dtbs/sun7i-a20-cubieboard2.dtb tftp 0x44000000 nenode: cubie2 status: on xt/next-20140515/multi_v7_defconfig/dtbs/sun7i-a20-cubieboard2.dtb Using emac device TFTP from server 172.16.1.3; our IP address is 172.16.1.116 Filename 'next/next-20140515/multi_v7_defconfig/dtbs/sun7i-a20-cubieboard2.dtb'. Load address: 0x44000000 Loading: *## 752 KiB/s done Bytes transferred = 18501 (4845 hex) sun7i# printenv bootargs printenv bootargs bootargs=console=ttyS0,115200n8 root=/dev/nfs rootwait rw nfsroot=172.16.1.7:/work/nfsroot/cubie2 ip=dhcp sun7i# bootz 0x42000000 - 0x44000000 bootz 0x42000000 - 0x44000000 Kernel image @ 0x42000000 [ 0x000000 - 0x473ce8 ] ## Flattened Device Tree blob at 44000000 Booting using the fdt blob at 0x44000000 Loading Device Tree to 40ff8000, end 40fff844 ... OK
Starting kernel ...
~$off # PYBOOT: Exception: timeout
========================================================================
Board cubie2-sunxi_defconfig failure log: -------------------------------------------------
DHCP client bound to address 172.16.1.116 sun7i# setenv serverip 172.16.1.3 setenv serverip 172.16.1.3 sun7i# tftp 0x42000000 next/next-20140515/sunxi_defconfig/zImage tftp 0x42000000 next/next-20140515/sunxi_defconfig/zImage Using emac device TFTP from server 172.16.1.3; our IP address is 172.16.1.116 Filename 'next/next-20140515/sunxi_defconfig/zImage'. Load address: 0x42000000 Loading: *################################################################# ############################################################# 4.3 MiB/s done Bytes transferred = 1845608 (1c2968 hex) sun7i# setenv serverip 172.16.1.3 setenv serverip 172.16.1.3 sun7i# tftp 0x44000000 next/next-20140515/sunxi_defconfig/dtbs/sun7i-a20-cubieboard2.dtb tftp 0x44000000 next/next-20140515/sunxi_defconfig/dtbs/sun7i-a20-cubieboard2.dtb Using emac device TFTP from server 172.16.1.3; our IP address is 172.16.1.116 Filename 'next/next-20140515/sunxi_defconfig/dtbs/sun7i-a20-cubieboard2.dtb'. Load address: 0x44000000 Loading: *## 3.5 MiB/s done Bytes transferred = 18501 (4845 hex) sun7i# printenv bootargs printenv bootargs bootargs=console=ttyS0,115200n8 root=/dev/nfs rootwait rw nfsroot=172.16.1.7:/work/nfsroot/cubie2 ip=dhcp sun7i# bootz 0x42000000 - 0x44000000 bootz 0x42000000 - 0x44000000 Kernel image @ 0x42000000 [ 0x000000 - 0x1c2968 ] ## Flattened Device Tree blob at 44000000 Booting using the fdt blob at 0x44000000 Loading Device Tree to 40ff8000, end 40fff844 ... OK
Starting kernel ...
~$off # PYBOOT: Exception: timeout
========================================================================
Board dalmore-tegra_defconfig failure log: -------------------------------------------------
tftp 0x82000000 next/next-20140515/tegra_defconfig/zImage Using asx0 device TFTP from server 172.16.1.3; our IP address is 172.16.1.121 Filename 'next/next-20140515/tegra_defconfig/zImage'. Load address: 0x82000000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ####################################### 3 MiB/s done Bytes transferred = 4377496 (42cb98 hex) Tegra114 (Dalmore) # setenv serverip 172.16.1.3 setenv serverip 172.16.1.3 Tegra114 (Dalmore) # tftp 0x83000000 next/next-20140515/tegra_defconfig/dtbs/tegra114-dalmore.dtb tftp 0x83000000 next/next-20140515/tegra_defconfig/dtbs/tegra114-dalmore.dtb Using asx0 device TFTP from server 172.16.1.3; our IP address is 172.16.1.121 Filename 'next/next-20140515/tegra_defconfig/dtbs/tegra114-dalmore.dtb'. Load address: 0x83000000 Loading: *### 928.7 KiB/s done Bytes transferred = 34244 (85c4 hex) Tegra114 (Dalmore) # printenv bootargs printenv bootargs bootargs=console=ttyS0,115200 root=/dev/mmcblk0p1 rootwait debug earlyprintk Tegra114 (Dalmore) # bootz 0x82000000 - 0x83000000 bootz 0x82000000 - 0x83000000 Kernel image @ 0x82000000 [ 0x000000 - 0x42cb98 ] ## Flattened Device Tree blob at 83000000 Booting using the fdt blob at 0x83000000 Loading Device Tree to 8fff4000, end 8ffff5c3 ... OK
Starting kernel ...
Uncompressing Linux... done, booting the kernel. ~$off # PYBOOT: Exception: timeout
========================================================================
Board panda-multi_v7_defconfig failure log: -------------------------------------------------
[ 1.687561] usbhid: USB HID core driver [ 1.695922] TCP: cubic registered [ 1.699432] NET: Registered protocol family 17 [ 1.704284] Key type dns_resolver registered [ 1.709259] Power Management for TI OMAP4+ devices. [ 1.714416] Power Management for TI OMAP4. [ 1.718719] OMAP4 PM: u-boot >= v2012.07 is required for full PM support [ 1.726135] ThumbEE CPU extension supported. [ 1.726135] Registering SWP/SWPB emulation handler [ 1.736450] vwl1271: 1800 mV [ 1.741149] Skipping twl internal clock init and using bootloader value (unknown osc rate) [ 1.750885] twl 0-0048: PIH (irq 39) nested IRQs [ 1.756927] twl_rtc rtc.15: Power up reset detected. [ 1.762817] twl_rtc rtc.15: Enabling TWL-RTC [ 1.769622] twl_rtc rtc.15: rtc core: registered rtc.15 as rtc0 [ 1.776702] VAUX1_6030: 1000 <--> 3000 mV at 2800 mV [ 1.782806] VAUX2_6030: 1200 <--> 2800 mV at 1800 mV [ 1.788970] VAUX3_6030: 1000 <--> 3000 mV at 1200 mV [ 1.795074] VMMC: 1200 <--> 3000 mV at 3000 mV [ 1.800628] VPP: 1800 <--> 2500 mV at 1900 mV [ 1.806091] VUSIM: 1200 <--> 2900 mV at 1800 mV [ 1.811126] VDAC: 1800 mV [ 1.811126] VANA: 2100 mV [ 1.818450] VCXIO: 1800 mV [ 1.821838] VUSB: 3300 mV [ 1.825408] V1V8: 1800 mV [ 1.829010] V2V1: 2100 mV [ 1.834960] omap_i2c 48070000.i2c: bus 0 rev0.11 at 400 kHz [ 1.906402] usb 1-1: new high-speed USB device number 2 using ehci-omap [ 2.077819] hub 1-1:1.0: USB hub found [ 2.082061] hub 1-1:1.0: 5 ports detected [ 2.146820] omap_i2c 48072000.i2c: bus 1 rev0.11 at 400 kHz [ 2.236572] gic_timer_retrigger: lost localtimer interrupt [ 2.242706] gic_timer_retrigger: lost localtimer interrupt [ 2.376312] usb 1-1.1: new high-speed USB device number 3 using ehci-omap [ 2.457000] omap_i2c 48060000.i2c: bus 2 rev0.11 at 100 kHz [ 2.511047] smsc95xx v1.0.4 [ 2.608184] smsc95xx 1-1.1:1.0 eth0: register 'smsc95xx' at usb-4a064c00.ehci-1.1, smsc95xx USB 2.0 Ethernet, fa:ac:02:a1:b3:b0 ~$off # PYBOOT: Exception: timeout
========================================================================
Board seaboard-tegra_defconfig failure log: -------------------------------------------------
tftp 0x800000 next/next-20140515/tegra_defconfig/zImage Using asx0 device TFTP from server 172.16.1.3; our IP address is 172.16.1.117 Filename 'next/next-20140515/tegra_defconfig/zImage'. Load address: 0x800000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ####################################### 3.3 MiB/s done Bytes transferred = 4377496 (42cb98 hex) Tegra20 (SeaBoard) # setenv serverip 172.16.1.3 setenv serverip 172.16.1.3 Tegra20 (SeaBoard) # tftp 0x1800000 next/next-20140515/tegra_defconfig/dtbs/tegra20-seaboard.dtb tftp 0x1800000 next/next-20140515/tegra_defconfig/dtbs/tegra20-seaboard.dtb Using asx0 device TFTP from server 172.16.1.3; our IP address is 172.16.1.117 Filename 'next/next-20140515/tegra_defconfig/dtbs/tegra20-seaboard.dtb'. Load address: 0x1800000 Loading: *## 2.8 MiB/s done Bytes transferred = 26465 (6761 hex) Tegra20 (SeaBoard) # printenv bootargs printenv bootargs bootargs=root=/dev/mmcblk0p3 console=ttyS0,115200 debug earlyprintk Tegra20 (SeaBoard) # bootz 0x800000 - 0x1800000 bootz 0x800000 - 0x1800000 Kernel image @ 0x800000 [ 0x000000 - 0x42cb98 ] ## Flattened Device Tree blob at 01800000 Booting using the fdt blob at 0x1800000 Loading Device Tree to 0fff6000, end 0ffff760 ... OK
Starting kernel ...
Uncompressing Linux... done, booting the kernel. ~$off # PYBOOT: Exception: timeout
========================================================================
Board snowball-multi_v7_defconfig failure log: -------------------------------------------------
BOOTP broadcast 1 *** Unhandled DHCP Option in OFFER/ACK: 28 *** Unhandled DHCP Option in OFFER/ACK: 28 DHCP client bound to address 172.16.1.118 U8500 $ setenv serverip 172.16.1.3 setenv serverip 172.16.1.3 U8500 $ tftp 0x01000000 tmp/snowball-iuFyYC/tmpGIQ3M3-uImage tftp 0x01000000 tmp/snowball-iuFyYC/tmpGIQ3M3-uImage smc911x: detected LAN9221 controller smc911x: phy initialized smc911x: MAC 08:00:08:1e:0f:44 Using smc911x-0 device TFTP from server 172.16.1.3; our IP address is 172.16.1.118 Filename 'tmp/snowball-iuFyYC/tmpGIQ3M3-uImage'. Load address: 0x1000000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ############################################################# done Bytes transferred = 4709957 (47de45 hex) U8500 $ printenv bootargs printenv bootargs bootargs=console=ttyAMA2,115200 root=/dev/mmcblk0p4 rootwait rw debug earlyprintk U8500 $ bootm 0x01000000 bootm 0x01000000 ## Booting kernel from Legacy Image at 01000000 ... Image Name: Linux Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 4709893 Bytes = 4.5 MB Load Address: 00008000 Entry Point: 00008000 Loading Kernel Image ... OK OK
Starting kernel ...
~$off # PYBOOT: Exception: timeout
========================================================================
Board trimslice-tegra_defconfig failure log: -------------------------------------------------
tftp 0x800000 next/next-20140515/tegra_defconfig/zImage Using asx0 device TFTP from server 172.16.1.3; our IP address is 172.16.1.105 Filename 'next/next-20140515/tegra_defconfig/zImage'. Load address: 0x800000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ####################################### 2.9 MiB/s done Bytes transferred = 4377496 (42cb98 hex) Tegra20 (TrimSlice) # setenv serverip 172.16.1.3 setenv serverip 172.16.1.3 Tegra20 (TrimSlice) # tftp 0x1800000 next/next-20140515/tegra_defconfig/dtbs/tegra20-trimslice.dtb tftp 0x1800000 next/next-20140515/tegra_defconfig/dtbs/tegra20-trimslice.dtb Using asx0 device TFTP from server 172.16.1.3; our IP address is 172.16.1.105 Filename 'next/next-20140515/tegra_defconfig/dtbs/tegra20-trimslice.dtb'. Load address: 0x1800000 Loading: *## 2.8 MiB/s done Bytes transferred = 20401 (4fb1 hex) Tegra20 (TrimSlice) # printenv bootargs printenv bootargs bootargs=console=ttyS0,115200 root=/dev/sda1 rootwait rw Tegra20 (TrimSlice) # bootz 0x800000 - 0x1800000 bootz 0x800000 - 0x1800000 Kernel image @ 0x800000 [ 0x000000 - 0x42cb98 ] ## Flattened Device Tree blob at 01800000 Booting using the fdt blob at 0x1800000 Loading Device Tree to 0fff8000, end 0fffffb0 ... OK
Starting kernel ...
Uncompressing Linux... done, booting the kernel. ~$off # PYBOOT: Exception: timeout
On 05/15/2014 11:15 AM, Olof's autobooter wrote:
Failed boards:
beaver tegra_defconfig : FAILED 1:03.90 dalmore tegra_defconfig : FAILED 1:09.44 seaboard tegra_defconfig : FAILED 1:09.85 trimslice tegra_defconfig : FAILED 1:07.78
I believe these failures (and the same in Kevin's tester) are all due to 9d755d33f0db "cgroup: use cgroup->self.refcnt for cgroup refcnting". At least, I get the same no-output-on-boot on Jetson TK1, and reverting that patch solves it. I've replied to that patch to try and find out the problem.
On Thu, May 15, 2014 at 12:08 PM, Stephen Warren swarren@wwwdotorg.org wrote:
On 05/15/2014 11:15 AM, Olof's autobooter wrote:
Failed boards:
beaver tegra_defconfig : FAILED 1:03.90 dalmore tegra_defconfig : FAILED 1:09.44 seaboard tegra_defconfig : FAILED 1:09.85 trimslice tegra_defconfig : FAILED 1:07.78I believe these failures (and the same in Kevin's tester) are all due to 9d755d33f0db "cgroup: use cgroup->self.refcnt for cgroup refcnting". At least, I get the same no-output-on-boot on Jetson TK1, and reverting that patch solves it. I've replied to that patch to try and find out the problem.
FWIW, I confirm that reverting that cgroup commit gets beaver booting here with current -next.
Kevin
kernel-build-reports@lists.linaro.org
-
Kevin Hilman -
Olof's autobooter -
Stephen Warren