queue boot: 5 passed 10 failed (queue/v3.10.17-40-gcbc903d) - Kernel-build-reports

26 Oct 2013


      arndale             :	passed	0:55.95
    bbb                 :	FAILED	1:14.22
    beaver              :	passed	0:32.75
    multi-beaver        :	FAILED	0:46.40
    cubie2              :	FAILED	0:52.62
    cubie               :	FAILED	0:12.97
    cubox               :	passed	0:51.46
    panda               :	passed	2:50.33
    multi-panda         :	FAILED	0:46.87
    sama5               :	passed	1:41.55
    snowball            :	FAILED	1:35.94
    multi-snowball      :	FAILED	0:48.43
    multi-trimslice     :	FAILED	0:44.40
    wandboard           :	FAILED	0:40.87
    multi-wandboard     :	FAILED	0:40.38
Board legend:
Board               :	System                 SoC                  Defconfig
arndale             :	InSignal ArndaleBoard     Samsung Exynos 5250  exynos_defconfig
    bbb                 :	BeagleBone Black          TI Sitara AM3359     omap2plus_defconfig
    beaver              :	Nvidia Beaver             Nvidia Tegra 30      tegra_defconfig
    multi-beaver        :	                                               multi_v7_defconfig
    cubie               :	Cubieboard                Allwinner A10        multi_v7_defconfig
    cubie2              :	Cubieboard 2              Allwinner A20        multi_v7_defconfig
    cubox               :	SolidRun Cubox            Marvell 88AP510      dove_defconfig
    multi-trimslice     :	CompuLab TrimSlice        Nvidia Tegra 20      multi_v7_defconfig
    panda               :	TI PandaBoard ES          TI OMAP4460          omap2plus_defconfig
    multi-panda         :	                                               multi_v7_defconfig
    sama5               :	Atmel SAMA5 devboard      Atmel SAMA5D35       sama5_defconfig
    snowball            :	CALAO Snowball            ST-Ericsson A9500    u8500_defconfig
    multi-snowball      :	                                               multi_v7_defconfig
    wandboard           :	Wandboard                 Freescale i.MX6 Quad imx_v6_v7_defconfig
    multi-wandboard     :	                                               multi_v7_defconfig
Last entries of failed logs below:
========================================================================
Board bbb failure log:
    -------------------------------------------------
Environment size: 4203/131068 bytes
U-Boot# setenv bootargs 'console=ttyO0,115200 root=/dev/nfs rootwait rw nfsroot=172.16.1.7:/work/nfsroot/bbb ip=dhcp'
setenv bootargs 'console=ttyO0,115200 root=/dev/nfs rootwait rw nfsroot=172.16.1.7:/work/nfsroot/bbb ip=dhcp'
U-Boot# printenv bootargs
printenv bootargs
bootargs=console=ttyO0,115200 root=/dev/nfs rootwait rw nfsroot=172.16.1.7:/work/nfsroot/bbb ip=dhcp
U-Boot# tftpboot 0x80000000 172.16.1.4:/srv/tftp/queue/v3.10.17-40-gcbc903d/uImage.omap
tftpboot 0x80000000 172.16.1.4:/srv/tftp/queue/v3.10.17-40-gcbc903d/uImage.omap
link up on port 0, speed 100, full duplex
Using cpsw device
TFTP from server 172.16.1.4; our IP address is 172.16.1.107
Filename '/srv/tftp/queue/v3.10.17-40-gcbc903d/uImage.omap'.
Load address: 0x80000000
Loading: *#################################################################
     #################################################################
     #################################################################
     #################################################################
     #################################################################
     #################################################################
     #################################################################
     #################################################################
     #################################################################
     #################################################################
     #################################################################
     #################################################################
     #####
     625 KiB/s
done
Bytes transferred = 4018560 (3d5180 hex)
U-Boot# tftpboot 0x81000000 172.16.1.4:/srv/tftp/queue/v3.10.17-40-gcbc903d/am335x-boneblack.dtb
tftpboot 0x81000000 172.16.1.4:/srv/tftp/queue/v3.10.17-40-gcbc903d/am335x-boneblack.dtb
link up on port 0, speed 100, full duplex
Using cpsw device
TFTP from server 172.16.1.4; our IP address is 172.16.1.107
Filename '/srv/tftp/queue/v3.10.17-40-gcbc903d/am335x-boneblack.dtb'.
Load address: 0x81000000
Loading: *
TFTP error: 'File not found' (1)
Not retrying...
U-Boot# ~$off
========================================================================
Board cubie2 failure log:
    -------------------------------------------------
netmask=255.255.255.0
panicarg=panic=10
partition=0:1
scriptaddr=0x44000000
serverip=172.16.1.4
setargs=if test -z \"$root\"; then if test \"$bootpath\" = "boot/"; then root="/dev/mmcblk0p1 rootwait"; else root="/dev/mmcblk0p2 rootwait"; fi; fi; setenv bootargs console=${console} root=${root} loglevel=${loglevel} ${panicarg} ${extraargs}
stderr=serial
stdin=serial
stdout=serial
Environment size: 2099/131068 bytes
sun7i# printenv bootargs
printenv bootargs
bootargs=console=ttyS0,115200n8 root=/dev/nfs rootwait rw nfsroot=172.16.1.7:/work/nfsroot/cubie2 ip=dhcp
sun7i# tftpboot 0x41000000 172.16.1.4:/srv/tftp/queue/v3.10.17-40-gcbc903d/uImage.multi-1g
tftpboot 0x41000000 172.16.1.4:/srv/tftp/queue/v3.10.17-40-gcbc903d/uImage.multi-1g
Using emac device
TFTP from server 172.16.1.4; our IP address is 172.16.1.153
Filename '/srv/tftp/queue/v3.10.17-40-gcbc903d/uImage.multi-1g'.
Load address: 0x41000000
Loading: *#################################################################
     #################################################################
     #################################################################
     #################################################################
     #################################################################
     ###############################
     2.7 MiB/s
done
Bytes transferred = 1820064 (1bc5a0 hex)
sun7i# tftpboot 0x42000000 172.16.1.4:/srv/tftp/queue/v3.10.17-40-gcbc903d/sun7i-a20-cubieboard2.dtb
tftpboot 0x42000000 172.16.1.4:/srv/tftp/queue/v3.10.17-40-gcbc903d/sun7i-a20-cubieboard2.dtb
Using emac device
TFTP from server 172.16.1.4; our IP address is 172.16.1.153
Filename '/srv/tftp/queue/v3.10.17-40-gcbc903d/sun7i-a20-cubieboard2.dtb'.
Load address: 0x42000000
Loading: *
TFTP error: 'File not found' (1)
Not retrying...
sun7i# node: cubie2          status: on
~$off
========================================================================
Board cubie failure log:
    -------------------------------------------------
io scheduler deadline registered
io scheduler cfq registered (default)
sunxi-pinctrl 1c20800.pinctrl: initialized sunXi PIO driver
ipmi message handler version 39.2
IPMI System Interface driver.
ipmi_si: Adding default-specified kcs state machine
ipmi_si: Trying default-specified kcs state machine at i/o address 0xca2, slave address 0x0, irq 0
ipmi_si: Could not set up I/O space
Trying to free nonexistent resource <0000000000000ca2-0000000000000ca2>
Trying to free nonexistent resource <0000000000000ca3-00000node: cubie           status: on
00000000ca3>
ipmi_si: Adding default-specified smic state machine
ipmi_si: Trying default-specified smic state machine at i/o address 0xca9, slave address 0x0, irq 0
ipmi_si: Could not set up I/O space
Trying to free nonexistent resource <0000000000000ca9-0000000000000ca9>
Trying to free nonexistent resource <0000000000000caa-0000000000000caa>
Trying to free nonexistent resource <0000000000000cab-0000000000000cab>
ipmi_si: Adding default-specified bt state machine
ipmi_si: Trying default-specified bt state machine at i/o address 0xe4, slave address 0x0, irq 0
ipmi_si: Could not set up I/O space
Trying to free nonexistent resource <00000000000000e4-00000000000000e4>
Trying to free nonexistent resource <00000000000000e5-00000000000000e5>
Trying to free nonexistent resource <00000000000000e6-00000000000000e6>
ipmi_si: Unable to find any System Interface(s)
Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
1c28000.serial: ttyS0 at MMIO 0x1c28000 (irq = 17) is a U6_16550A
console [ttyS0] enabled
usbcore: registered new interface driver usb-storage
mousedev: PS/2 mouse device common for all mice
sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright(c) Pierre Ossman
sdhci-pltfm: SDHCI platform and OF driver helper
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 3
Registering SWP/SWPB emulation handler
../../drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
List of all partitions:
No filesystem could mount root, tried: 
Kernel panic - ~$off
========================================================================
Board multi-beaver failure log:
    -------------------------------------------------
TFTP from server 172.16.1.4; our IP address is 172.16.1.174
Filename '/srv/tftp/queue/v3.10.17-40-gcbc903d/uImage.multi-2g'.
Load address: 0x82000000
Loading: *#################################################################
     #################################################################
     #################################################################
     #################################################################
     #################################################################
     ###############################
     1.9 MiB/s
done
Bytes transferred = 1820064 (1bc5a0 hex)
Tegra30 (Beaver) # tftpboot 0x83000000 172.16.1.4:/srv/tftp/queue/v3.10.17-40-gcbc903d/tegra30-beaver.dtb
tftpboot 0x83000000 172.16.1.4:/srv/tftp/queue/v3.10.17-40-gcbc903d/tegra30-beaver.dtb
Using asx0 device
TFTP from server 172.16.1.4; our IP address is 172.16.1.174
Filename '/srv/tftp/queue/v3.10.17-40-gcbc903d/tegra30-beaver.dtb'.
Load address: 0x83000000
Loading: *####
     1.3 MiB/s
done
Bytes transferred = 16546 (40a2 hex)
Tegra30 (Beaver) # bootm 0x82000000 - 0x83000000
bootm 0x82000000 - 0x83000000
## Booting kernel from Legacy Image at 82000000 ...
   Image Name:   
   Image Type:   ARM Linux Kernel Image (uncompressed)
   Data Size:    1820000 Bytes = 1.7 MiB
   Load Address: 80008000
   Entry Point:  80008000
   Verifying Checksum ... OK
## Flattened Device Tree blob at 83000000
   Booting using the fdt blob at 0x83000000
   Loading Kernel Image ... OK
   Loading Device Tree to 8fff8000, end 8ffff0a1 ... OK
Starting kernel ...
node: beaver          status: on
~$off
========================================================================
Board multi-panda failure log:
    -------------------------------------------------
TFTP from server 172.16.1.4; our IP address is 172.16.1.182
Filename '/srv/tftp/queue/v3.10.17-40-gcbc903d/uImage.multi-2g'.
Load address: 0x80000000
Loading: *#################################################################
     #################################################################
     #################################################################
     #################################################################
     #################################################################
     ###############################
done
Bytes transferred = 1820064 (1bc5a0 hex)
Panda # tftpboot 0x81000000 172.16.1.4:/srv/tftp/queue/v3.10.17-40-gcbc903d/omap4-panda-es.dtb
tftpboot 0x81000000 172.16.1.4:/srv/tftp/queue/v3.10.17-40-gcbc903d/omap4-panda-es.dtb
Waiting for Ethernet connection... done.
Using sms0 device
TFTP from server 172.16.1.4; our IP address is 172.16.1.182
Filename '/srv/tftp/queue/v3.10.17-40-gcbc903d/omap4-panda-es.dtb'.
Load address: 0x81000000
Loading: *####
done
Bytes transferred = 17271 (4377 hex)
Panda # bootm 0x80000000 - 0x81000000
bootm 0x80000000 - 0x81000000
## Booting kernel from Legacy Image at 80000000 ...
   Image Name:   
   Image Type:   ARM Linux Kernel Image (uncompressed)
   Data Size:    1820000 Bytes = 1.7 MiB
   Load Address: 80008000
   Entry Point:  80008000
   Verifying Checksum ... OK
## Flattened Device Tree blob at 81000000
   Booting using the fdt blob at 0x81000000
   Loading Kernel Image ... OK
OK
   reserving fdt memory region: addr=9d000000 size=3000000
   Using Device Tree in place at 81000000, end 81007376
Starting kernel ...
~$off
========================================================================
Board multi-snowball failure log:
    -------------------------------------------------
ipaddr=172.16.1.121
serverip=172.16.1.7
bootfile=queue/v3.10.17-40-gcbc903d/uImage.multi-snowball
autoboot=no
Environment size: 1706/4092 bytes
U8500 $ printenv bootargs
printenv bootargs
bootargs=console=ttyAMA2,115200 root=/dev/mmcblk0p4 rootwait rw debug earlyprintk
U8500 $ tftpboot 0x100000 172.16.1.4:/srv/tftp/queue/v3.10.17-40-gcbc903d/uImage.multi-snowball
tftpboot 0x100000 172.16.1.4:/srv/tftp/queue/v3.10.17-40-gcbc903d/uImage.multi-snowball
smc911x: detected LAN9221 controller
smc911x: phy initialized
smc911x: MAC 08:00:08:1e:0f:44
Using smc911x-0 device
TFTP from server 172.16.1.4; our IP address is 172.16.1.121
Filename '/srv/tftp/queue/v3.10.17-40-gcbc903d/uImage.multi-snowball'.
Load address: 0x100000
Loading: *#################################################################
     #################################################################
     #################################################################
     #################################################################
     #################################################################
     #######################T ########
done
Bytes transferred = 1820064 (1bc5a0 hex)
U8500 $ bootm 0x100000
bootm 0x100000
## Booting kernel from Legacy Image at 00100000 ...
   Image Name:   
   Image Type:   ARM Linux Kernel Image (uncompressed)
   Data Size:    1820000 Bytes =  1.7 MB
   Load Address: 00008000
   Entry Point:  00008000
   Loading Kernel Image ... OK
OK
Starting kernel ...
~$off
========================================================================
Board multi-trimslice failure log:
    -------------------------------------------------
*** Unhandled DHCP Option in OFFER/ACK: 28
DHCP client bound to address 172.16.1.135
TrimSlice # setenv bootfile queue/v3.10.17-40-gcbc903d/uImage.multi-trimslice
setenv bootfile queue/v3.10.17-40-gcbc903d/uImage.multi-trimslice
TrimSlice # setenv autoboot no
setenv autoboot no
TrimSlice # printenv
printenv
bootdelay=5
baudrate=115200
loadaddr=0x408000
stdin=serial,usbkbd
stdout=serial,lcd
stderr=serial,lcd
console=ttyS0,115200n8
ethact=RTL8169#0
gateway=172.16.1.1
bootcmd=none
bootargs=console=ttyS0,115200 root=/dev/sda1 rootwait rw
autoload=no
netmask=255.255.255.0
ipaddr=172.16.1.135
serverip=172.16.1.7
bootfile=queue/v3.10.17-40-gcbc903d/uImage.multi-trimslice
autoboot=no
Environment size: 376/65532 bytes
TrimSlice # printenv bootargs
printenv bootargs
bootargs=console=ttyS0,115200 root=/dev/sda1 rootwait rw
TrimSlice # tftpboot 0x800000 172.16.1.4:/srv/tftp/queue/v3.10.17-40-gcbc903d/uImage.multi-trimslice
tftpboot 0x800000 172.16.1.4:/srv/tftp/queue/v3.10.17-40-gcbc903d/uImage.multi-trimslice
Using RTL8169#0 device
TFTP from server 172.16.1.4; our IP address is 172.16.1.135
Filename '/srv/tftp/queue/v3.10.17-40-gcbc903d/uImage.multi-trimslice'.
Load address: 0x800000
Loading: *
TFTP error: 'File not found' (1)
Not retrying...
TrimSlice # ~$off
========================================================================
Board multi-wandboard failure log:
    -------------------------------------------------
mmcroot=/dev/mmcblk0p2 ro
mmcrootfstype=ext4 rootwait
netargs=setenv bootargs console=${console},${baudrate} root=/dev/nfs ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp
netboot=echo Booting from net ...; run netargs; if test ${ip_dyn} = yes; then setenv get_cmd dhcp; else setenv get_cmd tftp; fi; ${get_cmd} zImage; if test ${boot_fdt} = yes || test ${boot_fdt} = try; then if ${get_cmd} ${fdt_addr} ${fdt_file}; then bootz ${loadaddr} - ${fdt_addr}; else if test ${boot_fdt} = try; then bootz ${loadaddr}; else echo WARN: Cannot load the DT; fi; fi; else bootz ${loadaddr}; fi;
netmask=255.255.255.0
script=boot.scr
serverip=172.16.1.7
uimage=uImage
update_sd_firmware=if test ${ip_dyn} = yes; then setenv get_cmd dhcp; else setenv get_cmd tftp; fi; if mmc dev ${mmcdev}; then if ${get_cmd} ${update_sd_firmware_filename}; then setexpr fw_sz ${filesize} / 0x200; setexpr fw_sz ${fw_sz} + 1; mmc write ${loadaddr} 0x2 ${fw_sz}; fi; fi
update_sd_firmware_filename=u-boot.imx
Environment size: 2719/8188 bytes
=> printenv bootargs
printenv bootargs
bootargs=console=ttymxc0,115200 root=/dev/mmcblk0p2 rootwait debug
=> tftpboot 0x12000000 172.16.1.4:/srv/tftp/queue/v3.10.17-40-gcbc903d/uImage.multi-256m
tftpboot 0x12000000 172.16.1.4:/srv/tftp/queue/v3.10.17-40-gcbc903d/uImage.multi-256m
Using FEC device
TFTP from server 172.16.1.4; our IP address is 172.16.1.154
Filename '/srv/tftp/queue/v3.10.17-40-gcbc903d/uImage.multi-256m'.
Load address: 0x12000000
Loading: *#################################################################
     #################################################################
     #################################################################
     #################################################################
     #################################################################
     ###############################
     3.7 MiB/s
done
Bytes transferred = 1820064 (1bc5a0 hex)
=> tftpboot 0x14000000 172.16.1.4:/srv/tftp/queue/v3.10.17-40-gcbc903d/imx6q-wandboard.dtb
tftpboot 0x14000000 172.16.1.4:/srv/tftp/queue/v3.10.17-40-gcbc903d/imx6q-wandboard.dtb
Using FEC device
TFTP from server 172.16.1.4; our IP address is 172.16.1.154
Filename '/srv/tftp/queue/v3.10.17-40-gcbc903d/imx6q-wandboard.dtb'.
Load address: 0x14000000
Loading: *
TFTP error: 'File not found' (1)
Not retrying...
=> ~$off
========================================================================
Board snowball failure log:
    -------------------------------------------------
[WARN] mmci-pl18x sdi0: Platform OCR mask is ignored
[WARN] leds-gpio leds-gpio.0: pins are not configured from the driver
[WARN] dma40 dma40.0: coherent DMA mask is unset
[WARN] EXT4-fs (mmcblk0p4): warning: maximal mount count reached, running e2fsck is recommended
[WARN] dma40 dma40.0: coherent DMA mask is unset
[WARN] dma40 dma40.0: coherent DMA mask is unset
[WARN] dma40 dma40.0: coherent DMA mask is unset
[WARN] dma40 dma40.0: coherent DMA mask is unset
[WARN] dma40 dma40.0: coherent DMA mask is unset
root@snowball:~# ifconfig -a
ifconfig -a
eth0      Link encap:Ethernet  HWaddr 08:00:08:1e:0f:44  
          inet addr:172.16.1.121  Bcast:172.16.1.255  Mask:255.255.255.0
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:19 errors:0 dropped:0 overruns:0 frame:0
          TX packets:12 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000 
          RX bytes:2485 (2.4 KiB)  TX bytes:1715 (1.6 KiB)
          Interrupt:50
lo        Link encap:Local Loopback  
          inet addr:127.0.0.1  Mask:255.0.0.0
          UP LOOPBACK RUNNING  MTU:65536  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0 
          RX bytes:0 (0.0 B)  TX bytes:0 (0.0 B)
root@snowball:~# halt
halt

Broadcast message from root@snowball (ttyAMA2) (Sat Oct 26 20:19:01 2013):
The system is going down for system halt NOW!
INIT: Switching to runlevel: 0
INIT: Sending processes the TERM signal
tty_port_close_start: tty->count = 1 port count = 2.
ó[[36minfo[39;49m] Using makefile-style concurrent boot in runlevel 0.
[....] Stopping web server: apache2 ... waiting [?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0c.
[....] Asking all remaining processes to terminate...EXT4-fs (mmcblk0p4): re-mounted. Opts: (null)
Power ~$off
========================================================================
Board wandboard failure log:
    -------------------------------------------------
uimage=uImage
update_sd_firmware=if test ${ip_dyn} = yes; then setenv get_cmd dhcp; else setenv get_cmd tftp; fi; if mmc dev ${mmcdev}; then if ${get_cmd} ${update_sd_firmware_filename}; then setexpr fw_sz ${filesize} / 0x200; setexpr fw_sz ${fw_sz} + 1; mmc write ${loadaddr} 0x2 ${fw_sz}; fi; fi
update_sd_firmware_filename=u-boot.imx
Environment size: 2712/8188 bytes
=> printenv bootargs
printenv bootargs
bootargs=console=ttymxc0,115200 root=/dev/mmcblk0p2 rootwait debug
=> tftpboot 0x12000000 172.16.1.4:/srv/tftp/queue/v3.10.17-40-gcbc903d/uImage.imx
tftpboot 0x12000000 172.16.1.4:/srv/tftp/queue/v3.10.17-40-gcbc903d/uImage.imx
Using FEC device
TFTP from server 172.16.1.4; our IP address is 172.16.1.154
Filename '/srv/tftp/queue/v3.10.17-40-gcbc903d/uImage.imx'.
Load address: 0x12000000
Loading: *#################################################################
     #################################################################
     #################################################################
     #################################################################
     #################################################################
     #################################################################
     #################################################################
     #################################################################
     #################################################################
     #################################################################
     #################################################################
     #################################################################
     ##########################################
     3.8 MiB/s
done
Bytes transferred = 4204888 (402958 hex)
=> tftpboot 0x14000000 172.16.1.4:/srv/tftp/queue/v3.10.17-40-gcbc903d/imx6q-wandboard.dtb
tftpboot 0x14000000 172.16.1.4:/srv/tftp/queue/v3.10.17-40-gcbc903d/imx6q-wandboard.dtb
Using FEC device
TFTP from server 172.16.1.4; our IP address is 172.16.1.154
Filename '/srv/tftp/queue/v3.10.17-40-gcbc903d/imx6q-wandboard.dtb'.
Load address: 0x14000000
Loading: *
TFTP error: 'File not found' (1)
Not retrying...
=> ~$off