Automated DT boot report for various ARM defconfigs.

Tree/Branch: next Git describe: next-20140303 Failed boot tests (console logs at the end) =========================================== ste-snowball: FAIL: multi_v7_defconfig

Full Report ===========

da8xx_omapl_defconfig --------------------- da850-evm PASS: 0 min 15.3 sec

omap2plus_defconfig ------------------- legacy,3730xm PASS: 0 min 51.4 sec am335x-boneblack PASS: 0 min 25.4 sec omap3-beagle-xm PASS: 1 min 1.6 sec legacy,3530beagle PASS: 1 min 49.6 sec omap4-panda PASS: 1 min 12.2 sec omap3-overo-tobi PASS: 0 min 22.8 sec am335x-bone PASS: 0 min 27.4 sec omap3-overo-storm-tobi PASS: 0 min 22.1 sec omap5-uevm PASS: 1 min 1.4 sec omap4-panda-es PASS: 1 min 5.4 sec legacy,3730storm PASS: 0 min 23.7 sec legacy,3530overo PASS: 0 min 21.1 sec

multi_lpae_defconfig -------------------- omap5-uevm PASS: 1 min 44.8 sec sun7i-a20-cubieboard2 PASS: 0 min 14.2 sec

tegra_defconfig --------------- tegra30-beaver PASS: 0 min 17.1 sec

imx_v6_v7_defconfig ------------------- imx6dl-wandboard,wand-dual PASS: 0 min 18.1 sec imx6dl-wandboard,wand-solo PASS: 0 min 18.3 sec imx6q-wandboard PASS: 0 min 16.5 sec

sunxi_defconfig --------------- sun7i-a20-cubieboard2 PASS: 0 min 12.7 sec sun4i-a10-cubieboard PASS: 0 min 17.1 sec

bcm_defconfig ------------- bcm28155-ap PASS: 0 min 53.5 sec

mvebu_v7_defconfig ------------------ armada-xp-openblocks-ax3-4 PASS: 0 min 22.3 sec armada-370-mirabox PASS: 0 min 20.2 sec

exynos_defconfig ---------------- exynos5250-arndale PASS: 0 min 29.2 sec

multi_v7_defconfig ------------------ qcom-apq8074-dragonboard PASS: 1 min 14.6 sec ste-snowball FAIL: 0 min 33.4 sec tegra30-beaver PASS: 0 min 19.7 sec am335x-boneblack PASS: 0 min 23.5 sec omap3-beagle-xm PASS: 0 min 52.2 sec sun7i-a20-cubieboard2 PASS: 0 min 14.1 sec armada-370-mirabox PASS: 0 min 22.1 sec omap4-panda PASS: 1 min 3.6 sec armada-xp-openblocks-ax3-4 PASS: 0 min 25.7 sec sun4i-a10-cubieboard PASS: 0 min 18.4 sec bcm28155-ap PASS: 1 min 3.9 sec omap3-overo-tobi PASS: 0 min 22.1 sec imx6dl-wandboard,wand-solo PASS: 0 min 17.5 sec am335x-bone PASS: 0 min 26.3 sec omap3-overo-storm-tobi PASS: 0 min 24.1 sec omap5-uevm PASS: 1 min 49.6 sec imx6q-wandboard PASS: 0 min 16.7 sec omap4-panda-es PASS: 0 min 53.4 sec imx6dl-wandboard,wand-dual PASS: 0 min 17.9 sec

u8500_defconfig --------------- ste-snowball PASS: 0 min 33.2 sec

sama5_defconfig --------------- sama5d35ek PASS: 0 min 17.0 sec

davinci_all_defconfig --------------------- legacy,dm365evm PASS: 0 min 17.0 sec

Console logs for failures =========================

multi_v7_defconfig ------------------

ste-snowball: FAIL: last 80 lines of boot log: ----------------------------------------------

(user:khilman) Reboot snowball Reboot: snowball ; ip9258 2 2 : ('off', 6, 'on') , sleep 6,

MCDE: startup failed sec_bridge: ISSWAPI_FLUSH_BOOT_CODE: 2 EMMC: 0, MMC: 1 In: serial Out: serial Err: serial Net: smc911x-0 Hit any key to stop autoboot: 1  0

U8500 $ U8500 $ version

U8500 $ versionsetenv ethaddr 6e:e6:84:36:8e:9e

U-Boot 2009.11 (sept. 19 2011 - 17:03:11) U8500 $ setenv ethaddr 6e:e6:84:36:8e:9esetenv bootargs console=ttyAMA2,115200n8 debug earlyprintk rw root=/dev/mmcblk0p3 rootwait rootfstype=ext4

Can't overwrite "ethaddr" U8500 $ setenv bootargs console=ttyAMA2,115200n8 debug earlyprintk rw root=/dev/mmcblk0p3 rootwait rootfstype=ext4setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}::::192.168.1.254:none'

U8500 $ setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}::::192.168.1.254:none'if test -n ${initenv}; then run initenv; fi

U8500 $ if test -n ${initenv}; then run initenv; fiif test -n ${preboot}; then run preboot; fi

U8500 $ if test -n ${preboot}; then run preboot; fisetenv autoload no; setenv autoboot no

U8500 $ setenv autoload no; setenv autoboot nodhcp

U8500 $ dhcp smc911x: detected LAN9221 controller smc911x: phy initialized smc911x: MAC 6e:e6:84:36:8e:9e BOOTP broadcast 1 BOOTP broadcast 2 DHCP client bound to address 192.168.1.159 U8500 $setenv serverip 192.168.1.2 setenv serverip 192.168.1.2 U8500 $ if test -n ${netargs}; then run netargs; fi if test -n ${netargs}; then run netargs; fi U8500 $tftp 0x00800000 192.168.1.2:tmp/snowball-S7Aaig/tmpxTiBdf-uImage tftp 0x00800000 192.168.1.2:tmp/snowball-S7Aaig/tmpxTiBdf-uImage smc911x: detected LAN9221 controller smc911x: phy initialized smc911x: MAC 6e:e6:84:36:8e:9e Using smc911x-0 device TFTP from server 192.168.1.2; our IP address is 192.168.1.159 Filename 'tmp/snowball-S7Aaig/tmpxTiBdf-uImage'. Load address: 0x800000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ##################################################### done Bytes transferred = 4587769 (4600f9 hex) U8500 $ printenv bootargs printenv bootargs bootargs=console=ttyAMA2,115200n8 debug earlyprintk rw root=/dev/mmcblk0p3 rootwait rootfstype=ext4 ip=192.168.1.159:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none U8500 $ bootm 0x00800000 bootm 0x00800000 ## Booting kernel from Legacy Image at 00800000 ... Image Name: Linux Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 4587705 Bytes = 4.4 MB Load Address: 00008000 Entry Point: 00008000 Loading Kernel Image ... OK OK

Starting kernel ...

~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 33.42 seconds. # PYBOOT: Result: FAIL