Full logs are available at http://arm-soc.lixom.net/bootlogs/next/next-20160418/

Failed boards:

arndale arm-multi_v7_nosmp_defconfig : FAILED 12:08.89 bbb arm-omap2plus_defconfig : FAILED 1:55.45 bbb arm-multi_v7_defconfig : FAILED 0:47.27 bbb arm-multi_v7_nosmp_defconfig : FAILED 0:44.95 beagleboard-x15 arm-omap2plus_defconfig : FAILED 1:44.46 beagleboard-x15 arm-multi_v7_defconfig : FAILED 0:28.09 beagleboard-x15 arm-multi_lpae_defconfig : FAILED 0:23.99 beagleboard-x15 arm-multi_v7_nosmp_defconfig : FAILED 0:52.82 beaver arm-tegra_defconfig : FAILED 1:45.93 beaver arm-multi_v7_defconfig : FAILED 1:56.77 beaver arm-multi_v7_nosmp_defconfig : FAILED 1:49.23 colombus arm-multi_v7_nosmp_defconfig : FAILED 3:22.18 cosmic arm-imx_v6_v7_defconfig : FAILED 2:01.52 cosmic arm-multi_v7_defconfig : FAILED 2:19.04 cosmic arm-multi_v7_nosmp_defconfig : FAILED 2:03.26 dalmore arm-tegra_defconfig : FAILED 1:51.36 dalmore arm-multi_v7_defconfig : FAILED 1:59.76 dalmore arm-multi_lpae_defconfig : FAILED 2:01.39 dalmore arm-multi_v7_nosmp_defconfig : FAILED 1:53.04 minnowmax minnowmax_defconfig : NO BUILD odroidu3 arm-exynos_defconfig : FAILED 1:56.43 pi arm-multi_lpae_defconfig : FAILED 1:55.62 snow arm-multi_v7_nosmp_defconfig : FAILED 13:47.96 snowball arm-multi_v7_defconfig : FAILED 2:11.64 snowball arm-multi_v7_nosmp_defconfig : FAILED 2:01.04

Successful boards:

apc arm-vt8500_v6_v7_defconfig : passed 1:18.55 arndale arm-exynos_defconfig : passed 1:32.44 arndale arm-multi_v7_defconfig : warnings 1:34.11 arndale arm-multi_lpae_defconfig : warnings 1:22.91 capri arm-bcm_defconfig : passed 1:00.14 capri arm-multi_v7_defconfig : warnings 0:51.07 capri arm-multi_v7_nosmp_defconfig : warnings 0:51.93 chitra powerpc-pasemi_defconfig : passed 1:56.19 chitra powerpc-ppc64_defconfig : passed 2:51.74 colibri-vf61 arm-imx_v6_v7_defconfig : passed 1:37.37 colibri-vf61 arm-multi_v7_defconfig : warnings 1:30.55 colibri-vf61 arm-multi_v7_nosmp_defconfig : warnings 1:17.05 colombus arm-sunxi_defconfig : passed 2:35.94 colombus arm-multi_v7_defconfig : warnings 2:46.85 colombus arm-multi_lpae_defconfig : warnings 2:31.56 cubie arm-sunxi_defconfig : passed 0:51.26 cubie arm-multi_v7_defconfig : warnings 0:57.06 cubie arm-multi_v7_nosmp_defconfig : warnings 1:12.93 cubie2 arm-sunxi_defconfig : passed 0:50.53 cubie2 arm-multi_v7_defconfig : warnings 0:59.27 cubie2 arm-multi_lpae_defconfig : warnings 1:02.45 cubie2 arm-multi_v7_nosmp_defconfig : warnings 0:58.08 cubox arm-multi_v7_defconfig : warnings 1:04.91 cubox arm-mvebu_v7_defconfig : passed 1:08.28 cubox arm-multi_v7_nosmp_defconfig : warnings 1:08.46 hummingboard arm-imx_v6_v7_defconfig : passed 1:35.69 hummingboard arm-multi_v7_defconfig : warnings 1:26.07 hummingboard arm-multi_v7_nosmp_defconfig : warnings 1:13.49 jetsontk1 arm-tegra_defconfig : warnings 1:32.82 jetsontk1 arm-multi_v7_defconfig : warnings 1:36.10 jetsontk1 arm-multi_lpae_defconfig : warnings 1:40.69 jetsontk1 arm-multi_v7_nosmp_defconfig : warnings 1:34.98 pandaes arm-omap2plus_defconfig : warnings 1:44.91 pandaes arm-multi_v7_defconfig : passed 1:45.30 pandaes arm-multi_v7_nosmp_defconfig : warnings 1:44.91 pi arm-exynos_defconfig : passed 2:10.07 pi arm-multi_v7_defconfig : warnings 2:31.50 pi arm-multi_v7_nosmp_defconfig : warnings 2:13.25 pit arm-exynos_defconfig : passed 2:10.86 pit arm-multi_v7_defconfig : warnings 2:19.45 pit arm-multi_lpae_defconfig : warnings 2:20.98 pit arm-multi_v7_nosmp_defconfig : warnings 2:13.59 seattle arm64-defconfig : warnings 2:29.35 snow arm-exynos_defconfig : passed 2:19.78 snow arm-multi_v7_defconfig : warnings 2:02.60 snow arm-multi_lpae_defconfig : warnings 2:01.03 socfpga arm-socfpga_defconfig : warnings 1:14.05 socfpga arm-multi_v7_defconfig : warnings 1:11.69 socfpga arm-multi_v7_nosmp_defconfig : warnings 1:33.40 trimslice arm-multi_v7_defconfig : warnings 1:36.40 trimslice arm-multi_v7_nosmp_defconfig : warnings 1:35.84 wandboard arm-imx_v6_v7_defconfig : passed 1:18.20 wandboard arm-multi_v7_defconfig : warnings 1:23.21 wandboard arm-multi_v7_nosmp_defconfig : warnings 1:03.62

Offline boards:

omap5uevm arm-omap2plus_defconfig : OFFLINE 1:17.44 omap5uevm arm-multi_v7_defconfig : OFFLINE 1:17.50 omap5uevm arm-multi_lpae_defconfig : OFFLINE 1:24.36 omap5uevm arm-multi_v7_nosmp_defconfig : OFFLINE 1:24.68 parallella arm-multi_v7_defconfig : OFFLINE 2:24.79 parallella arm-multi_v7_nosmp_defconfig : OFFLINE 2:14.98 rk3288evb arm-multi_v7_defconfig : OFFLINE 0:52.51 rk3288evb arm-multi_lpae_defconfig : OFFLINE 0:46.46 rk3288evb arm-multi_v7_nosmp_defconfig : OFFLINE 0:41.88 sama5 arm-sama5_defconfig : OFFLINE 2:17.02 sama5d3-xplained arm-sama5_defconfig : OFFLINE 2:24.01 seaboard arm-tegra_defconfig : OFFLINE 2:23.32 seaboard arm-multi_v7_defconfig : OFFLINE 2:17.97 seaboard arm-multi_v7_nosmp_defconfig : OFFLINE 2:13.01 snowball arm-u8500_defconfig : OFFLINE 1:53.90 trimslice arm-tegra_defconfig : OFFLINE 2:22.73

Board legend is available at http://arm-soc.lixom.net/boards.html

Board arndale-arm-multi_v7_nosmp_defconfig failure log: -------------------------------------------------

[ 1.602951] console [ttySAC2] enabled [ 1.606785] 12c30000.serial: ttySAC3 at MMIO 0x12c30000 (irq = 59, base_baud = 0) is a S3C6400/10 [ 1.616270] msm_serial: driver initialized [ 1.619658] STMicroelectronics ASC driver initialized [ 1.625615] [drm] Initialized drm 1.1.0 20060810 [ 1.634503] loop: module loaded [ 1.637126] ahci 122f0000.sata: couldn't get PHY in node sata: -517 [ 1.645620] libphy: Fixed MDIO Bus: probed [ 1.648618] CAN device driver interface [ 1.652971] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.3.0-k [ 1.659002] igb: Copyright (c) 2007-2014 Intel Corporation. [ 1.666268] pegasus: v0.9.3 (2013/04/25), Pegasus/Pegasus II USB Ethernet driver [ 1.672221] usbcore: registered new interface driver pegasus [ 1.677862] usbcore: registered new interface driver asix [ 1.683236] usbcore: registered new interface driver ax88179_178a [ 1.689311] usbcore: registered new interface driver cdc_ether [ 1.695140] usbcore: registered new interface driver smsc75xx [ 1.700865] usbcore: registered new interface driver smsc95xx [ 1.706584] usbcore: registered new interface driver net1080 [ 1.712227] usbcore: registered new interface driver cdc_subset [ 1.718127] usbcore: registered new interface driver zaurus [ 1.723702] usbcore: registered new interface driver cdc_ncm [ 1.729966] usb_phy_generic.0.auto supply vcc not found, using dummy regulator [ 1.736624] usb_phy_generic.1.auto supply vcc not found, using dummy regulator [ 1.743758] exynos-dwc3 usb_dwc3: no suspend clk specified [ 1.749190] usb_dwc3 supply vdd33 not found, using dummy regulator [ 1.755363] usb_dwc3 supply vdd10 not found, using dummy regulator [ 1.763386] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.768448] ehci-pci: EHCI PCI platform driver [ 1.772897] ehci-platform: EHCI generic platform driver [ 1.778219] ehci-omap: OMAP-EHCI Host Controller driver [ 1.783368] ehci-orion: EHCI orion driver [ 1.787360] SPEAr-ehci: EHCI SPEAr driver [ 1.791355] ehci-st: EHCI STMicroelectronics driver [ 1.796216] ehci-exynos: EHCI EXYNOS driver [ 1.800474] ehci-atmel: EHCI Atmel dr [PYBOOT] [arndale 12:04]: got exception: maximum recursion depth exceeded ~$off

[PYBOOT] [arndale 12:05]: Done. Board bbb-arm-multi_v7_defconfig failure log: -------------------------------------------------

[ 1.452559] Stack: (0xdb057dd0 to 0xdb058000) [ 1.457136] 7dc0: 00000001 c0a06900 db0efa10 db0efa10 [ 1.465725] 7de0: 00000000 db37ccc0 c13b2474 db37caa8 c144fc50 db0efa10 00000000 00000000 [ 1.474314] 7e00: e083cd00 00000000 00000000 00000000 00000000 e083c800 e083ca00 00000000 [ 1.482903] 7e20: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 4a102000 [ 1.491492] 7e40: 00000000 00000000 00000000 00000000 db0f08c0 db0efa10 db0efa10 c13b2488 [ 1.500080] 7e60: fffffdfb 00000000 00000000 00000000 00000000 c0782700 c07826b4 db0efa10 [ 1.508669] 7e80: c144cf3c c144cf44 c13b2488 c0780e20 00000000 db0efa10 c13b2488 db0efa44 [ 1.517258] 7ea0: c13a3768 c140d000 0000011e c0780f78 00000000 c13b2488 c0780ecc c077f17c [ 1.525848] 7ec0: db01f85c db0d7e34 c13b2488 db4a3400 00000000 c0780418 c0f87cb8 c11a5834 [ 1.534438] 7ee0: c13b2488 c13b2488 c1140868 c11a5834 c140d000 c07817b4 c13b2474 c120bee0 [ 1.543027] 7f00: c1140868 c0301ea0 dfdff4c0 db057f28 c035c290 c0594214 20000000 ffffffff [ 1.551616] 7f20: 00000051 c1336dc0 00000591 c102cc34 c0c1d1dc c035c468 cccccccd 00000000 [ 1.560205] 7f40: c0f9bdbc 00000000 00000006 00000006 c1336da8 00000000 c120bee0 00000006 [ 1.568794] 7f60: c11a5834 c140d000 c140d000 0000011e c11a583c c1100db4 00000006 00000006 [ 1.577382] 7f80: 00000000 c11005a4 00000000 c0b6e494 00000000 00000000 00000000 00000000 [ 1.585971] 7fa0: 00000000 c0b6e49c 00000000 c0307ef8 00000000 00000000 00000000 00000000 [ 1.594559] 7fc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 [ 1.603147] 7fe0: 00000000 00000000 00000000 00000000 00000013 00000000 793d25f2 31fc6d5a [ 1.611766] [<c08b9898>] (cpsw_probe) from [<c0782700>] (platform_drv_probe+0x4c/0xb0) [ 1.620087] [<c0782700>] (platform_drv_probe) from [<c0780e20>] (driver_probe_device+0x214/0x2c0) [ 1.629405] [<c0780e20>] (driver_probe_device) from [<c0780f78>] (__driver_attach+0xac/0xb0) [ 1.638278] [<c0780f78>] (__driver_attach) from [<c077f17c>] (bus_for_each_dev+0x6c/0xa0) [ 1.646868] [<c077f17c>] (bus_for_each_dev) from [<c0780418>] (bus_add_driver+0x1a0/0x218) [ 1.655548] [<c0780418>] (bus_add_driver) from [<c07817b4>] (driver_register+0x78/0xf8) [ 1.663958] [<c07817b4>] (driver_register) from [<c0301ea0>] (do_one_initcall+0x40/0x170) [ 1.672559] [<c0301ea0>] (do_one_initcall) from [<c1100db4>] (kernel_init_freeable+0x15c/0x1fc) [ 1.681712] [<c1100db4>] (kernel_init_freeable) from [<c0b6e49c>] (kernel_init+0x8/0x114) [ 1.690312] [<c0b6e49c>] (kernel_init) from [<c0307ef8>] (ret_from_fork+0x14/0x3c) [ 1.698265] Code: e5837010 e7816000 e2800028 e5832004 (e1d721be) [ 1.704796] ---[ end trace 78dd65b275c9687a ]--- [ 1.709725] Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b [ 1.709725] [ 1.719324] ---[ end Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b [ 1.719324]

[PYBOOT] [bbb 00:44]: got exception: panic ~$off

[PYBOOT] [bbb 00:45]: Done. Board bbb-arm-multi_v7_nosmp_defconfig failure log: -------------------------------------------------

[ 1.224202] Stack: (0xdb057dd0 to 0xdb058000) [ 1.228776] 7dc0: 00000001 00000000 a0000013 db0dda10 [ 1.237362] 7de0: 00000000 c10a5ea4 db351a80 c113ae14 db351c80 db0dda10 0000a1ff 00000000 [ 1.245947] 7e00: e0832d00 00000000 00000000 00000000 00000000 e0832800 e0832a00 00000000 [ 1.254531] 7e20: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 4a102000 [ 1.263116] 7e40: 00000000 00000000 00000000 00000000 db0e0000 db0dda10 db0dda10 c10a5eb8 [ 1.271700] 7e60: fffffdfb 00000000 00000000 00000000 00000000 c0700c64 c0700c18 db0dda10 [ 1.280287] 7e80: c11382e0 c11382e8 c10a5eb8 c06ff3cc 00000000 db0dda10 c10a5eb8 db0dda44 [ 1.288872] 7ea0: c1097ea8 c10fe000 000000fc c06ff524 00000000 c10a5eb8 c06ff478 c06fd868 [ 1.297459] 7ec0: db03410c db0cec30 c10a5eb8 db40b400 00000000 c06fe9c4 c0dec1e8 c0f8a830 [ 1.306044] 7ee0: c10a5eb8 c10a5eb8 c0f3897c c0f8a830 c10fe000 c06ffd20 c10a5ea4 c0fed9ec [ 1.314630] 7f00: c0f3897c c0301c48 db004cc0 c112371c db032580 c0b06f44 00000000 00000000 [ 1.323216] 7f20: 0000e000 c042cf28 000004e7 c0e87d94 c0b1c39c c034cd24 00000000 00000000 [ 1.331802] 7f40: c0dfcef0 00000000 00000006 00000006 00000000 00000000 c0fed9ec 00000006 [ 1.340388] 7f60: c0f8a830 c10fe000 c10fe000 000000fc c0f8a838 c0f00d84 00000006 00000006 [ 1.348974] 7f80: 00000000 c0f005a4 00000000 c0a90e08 00000000 00000000 00000000 00000000 [ 1.357558] 7fa0: 00000000 c0a90e10 00000000 c0307b58 00000000 00000000 00000000 00000000 [ 1.366143] 7fc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 [ 1.374728] 7fe0: 00000000 00000000 00000000 00000000 00000013 00000000 793f25f2 33f86d5a [ 1.383344] [<c0813780>] (cpsw_probe) from [<c0700c64>] (platform_drv_probe+0x4c/0xb0) [ 1.391665] [<c0700c64>] (platform_drv_probe) from [<c06ff3cc>] (driver_probe_device+0x214/0x2c0) [ 1.400982] [<c06ff3cc>] (driver_probe_device) from [<c06ff524>] (__driver_attach+0xac/0xb0) [ 1.409842] [<c06ff524>] (__driver_attach) from [<c06fd868>] (bus_for_each_dev+0x6c/0xa0) [ 1.418427] [<c06fd868>] (bus_for_each_dev) from [<c06fe9c4>] (bus_add_driver+0x1a0/0x218) [ 1.427105] [<c06fe9c4>] (bus_add_driver) from [<c06ffd20>] (driver_register+0x78/0xf8) [ 1.435514] [<c06ffd20>] (driver_register) from [<c0301c48>] (do_one_initcall+0x40/0x170) [ 1.444111] [<c0301c48>] (do_one_initcall) from [<c0f00d84>] (kernel_init_freeable+0x138/0x1d8) [ 1.453252] [<c0f00d84>] (kernel_init_freeable) from [<c0a90e10>] (kernel_init+0x8/0x110) [ 1.461844] [<c0a90e10>] (kernel_init) from [<c0307b58>] (ret_from_fork+0x14/0x3c) [ 1.469795] Code: e5837010 e7816000 e2800028 e5832004 (e1d721be) [ 1.476264] ---[ end trace 7e1dbffc38f1ad3e ]--- [ 1.481166] Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b [ 1.481166] [ 1.490756] ---[ end Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b [ 1.490756]

[PYBOOT] [bbb 00:43]: got exception: panic ~$off

[PYBOOT] [bbb 00:44]: Done. Board bbb-arm-omap2plus_defconfig failure log: -------------------------------------------------

[ 2.089098] omap_hsmmc 481d8000.mmc: lookup for GPIO cd failed [ 2.095229] omap_hsmmc 481d8000.mmc: GPIO lookup for consumer wp [ 2.101565] omap_hsmmc 481d8000.mmc: using device tree for GPIO lookup [ 2.108451] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@481d8000[0]' [ 2.118060] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@481d8000[0]' [ 2.127574] omap_hsmmc 481d8000.mmc: using lookup tables for GPIO lookup [ 2.134601] omap_hsmmc 481d8000.mmc: lookup for GPIO wp failed [ 2.176391] ledtrig-cpu: registered to indicate activity on CPUs [ 2.185132] oprofile: using arm/armv7 [ 2.190149] Initializing XFRM netlink socket [ 2.195300] NET: Registered protocol family 10 [ 2.206407] sit: IPv6 over IPv4 tunneling driver [ 2.215360] NET: Registered protocol family 17 [ 2.220309] NET: Registered protocol family 15 [ 2.225575] Key type dns_resolver registered [ 2.230496] omap_voltage_late_init: Voltage driver support not added [ 2.237250] sr_dev_init: No voltage domain specified for smartreflex0. Cannot initialize [ 2.245801] sr_dev_init: No voltage domain specified for smartreflex1. Cannot initialize [ 2.256267] ThumbEE CPU extension supported. [ 2.260803] Registering SWP/SWPB emulation handler [ 2.265901] SmartReflex Class3 initialized [ 2.337284] mmc1: new high speed MMC card at address 0001 [ 2.351603] mmcblk1: mmc1:0001 MMC02G 1.79 GiB [ 2.361808] mmcblk1boot0: mmc1:0001 MMC02G partition 1 1.00 MiB [ 2.371708] mmcblk1boot1: mmc1:0001 MMC02G partition 2 1.00 MiB [ 2.386708] tps65217 0-0024: TPS65217 ID 0xe version 1.2 [ 2.394031] omap_i2c 44e0b000.i2c: bus 0 rev0.11 at 400 kHz [ 2.406529] mmcblk1: p1 p2 [ 2.414678] omap_i2c 4819c000.i2c: bus 2 rev0.11 at 100 kHz [ 2.434739] hctosys: unable to open rtc device (rtc0) [ 2.440268] sr_init: No PMIC hook to init smartreflex [ 2.446116] sr_init: platform driver register failed for SR [ 2.489664] Waiting for root device /dev/mmcblk0p2...

[PYBOOT] [bbb 01:52]: Timed out waiting for "<type 'str'>":

[PYBOOT] [bbb 01:53]: got exception: timeout ~$off

[PYBOOT] [bbb 01:54]: Done. Board beagleboard-x15-arm-multi_lpae_defconfig failure log: -------------------------------------------------

[ 2.004855] df80: 00000000 c11005a4 00000000 c0b6e494 00000000 00000000 00000000 00000000 [ 2.013404] dfa0: 00000000 c0b6e49c 00000000 c0307ef8 00000000 00000000 00000000 00000000 [ 2.021959] dfc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 [ 2.030513] dfe0: 00000000 00000000 00000000 00000000 00000013 00000000 ffffffff 00000000 [ 2.039066] [<c08b9898>] (cpsw_probe) from [<c0782700>] (platform_drv_probe+0x4c/0xb0) [ 2.047342] [<c0782700>] (platform_drv_probe) from [<c0780e20>] (driver_probe_device+0x214/0x2c0) [ 2.056615] [<c0780e20>] (driver_probe_device) from [<c0780f78>] (__driver_attach+0xac/0xb0) [ 2.065439] [<c0780f78>] (__driver_attach) from [<c077f17c>] (bus_for_each_dev+0x6c/0xa0) [ 2.073996] [<c077f17c>] (bus_for_each_dev) from [<c0780418>] (bus_add_driver+0x1a0/0x218) [ 2.082638] [<c0780418>] (bus_add_driver) from [<c07817b4>] (driver_register+0x78/0xf8) [ 2.091005] [<c07817b4>] (driver_register) from [<c0301ea0>] (do_one_initcall+0x40/0x170) [ 2.099557] [<c0301ea0>] (do_one_initcall) from [<c1100db4>] (kernel_init_freeable+0x15c/0x1fc) [ 2.108648] [<c1100db4>] (kernel_init_freeable) from [<c0b6e49c>] (kernel_init+0x8/0x114) [ 2.117205] [<c0b6e49c>] (kernel_init) from [<c0307ef8>] (ret_from_fork+0x14/0x3c) [ 2.125120] Code: e5837010 e7816000 e2800028 e5832004 (e1d721be) [ 2.131495] ---[ end trace 8fe418cb8e46a20a ]--- [ 2.136344] Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b [ 2.136344] [ 2.145896] CPU1: stopping [ 2.148731] CPU: 1 PID: 0 Comm: swapper/1 Tainted: G D W 4.6.0-rc3-next-20160418 #1 [ 2.157749] Hardware name: Generic DRA74X (Flattened Device Tree) [ 2.164142] [<c031046c>] (unwind_backtrace) from [<c030bb08>] (show_stack+0x10/0x14) [ 2.172248] [<c030bb08>] (show_stack) from [<c058d8c0>] (dump_stack+0x98/0xac) [ 2.179805] [<c058d8c0>] (dump_stack) from [<c030ec04>] (handle_IPI+0x16c/0x18c) [ 2.187550] [<c030ec04>] (handle_IPI) from [<c03017ac>] (gic_handle_irq+0x90/0x94) [ 2.195476] [<c03017ac>] (gic_handle_irq) from [<c030c694>] (__irq_svc+0x54/0x70) [ 2.203310] Exception stack(0xee0aff88 to 0xee0affd0) [ 2.208603] ff80: 00000001 00000000 00000000 c031b1c0 c13024a4 00000000 [ 2.217161] ffa0: 00000000 c1210600 c1302504 c130250c c140b229 ee0ae000 2dd8f000 ee0affd8 [ 2.225718] ffc0: c030892c c0308930 60000013 ffffffff [ 2.231005] [<c030c694>] (__irq_svc) from [<c0308930>] (arch_cpu_idle+0x38/0x3c) [ 2.238752] [<c0308930>] (arch_cpu_idle) from [<c0378b98>] (cpu_startup_entry+0x1bc/0x220) [ 2.247409] [<c0378b98>] (cpu_startup_entry) from [<80301c6c>] (0x80301c6c) [ 2.254707] ---[ end Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b [ 2.254707]

[PYBOOT] [beagleboard-x15 00:22]: got exception: panic ~$off

[PYBOOT] [beagleboard-x15 00:23]: Done. Board beagleboard-x15-arm-multi_v7_defconfig failure log: -------------------------------------------------

[ 2.013245] dfa0: 00000000 c0b6e49c 00000000 c0307ef8 00000000 00000000 00000000 00000000 [ 2.021790] dfc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 [ 2.030336] dfe0: 00000000 00000000 00000000 00000000 00000013 00000000 ffffffff 00000000 [ 2.038885] [<c08b9898>] (cpsw_probe) from [<c0782700>] (platform_drv_probe+0x4c/0xb0) [ 2.047158] [<c0782700>] (platform_drv_probe) from [<c0780e20>] (driver_probe_device+0x214/0x2c0) [ 2.056434] [<c0780e20>] (driver_probe_device) from [<c0780f78>] (__driver_attach+0xac/0xb0) [ 2.065253] [<c0780f78>] (__driver_attach) from [<c077f17c>] (bus_for_each_dev+0x6c/0xa0) [ 2.073805] [<c077f17c>] (bus_for_each_dev) from [<c0780418>] (bus_add_driver+0x1a0/0x218) [ 2.082434] [<c0780418>] (bus_add_driver) from [<c07817b4>] (driver_register+0x78/0xf8) [ 2.090800] [<c07817b4>] (driver_register) from [<c0301ea0>] (do_one_initcall+0x40/0x170) [ 2.099347] [<c0301ea0>] (do_one_initcall) from [<c1100db4>] (kernel_init_freeable+0x15c/0x1fc) [ 2.108437] [<c1100db4>] (kernel_init_freeable) from [<c0b6e49c>] (kernel_init+0x8/0x114) [ 2.116986] [<c0b6e49c>] (kernel_init) from [<c0307ef8>] (ret_from_fork+0x14/0x3c) [ 2.124897] Code: e5837010 e7816000 e2800028 e5832004 (e1d721be) [ 2.131262] ---[ end trace 63996b596ac264f7 ]--- [ 2.136103] Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b [ 2.136103] [ 2.145645] CPU0: stopping [ 2.148481] CPU: 0 PID: 0 Comm: swapper/0 Tainted: G D W 4.6.0-rc3-next-20160418 #1 [ 2.157496] Hardware name: Generic DRA74X (Flattened Device Tree) [ 2.163886] [<c031046c>] (unwind_backtrace) from [<c030bb08>] (show_stack+0x10/0x14) [ 2.172000] [<c030bb08>] (show_stack) from [<c058d8c0>] (dump_stack+0x98/0xac) [ 2.179564] [<c058d8c0>] (dump_stack) from [<c030ec04>] (handle_IPI+0x16c/0x18c) [ 2.187317] [<c030ec04>] (handle_IPI) from [<c03017ac>] (gic_handle_irq+0x90/0x94) [ 2.195248] [<c03017ac>] (gic_handle_irq) from [<c030c694>] (__irq_svc+0x54/0x70) [ 2.203087] Exception stack(0xc1301f50 to 0xc1301f98) [ 2.208381] 1f40: 00000001 00000000 00000000 c031b1c0 [ 2.216957] 1f60: c13024a4 00000000 00000000 c1210600 c1302504 c130250c c140b229 c1300000 [ 2.225519] 1f80: 2dd83000 c1301fa0 c030892c c0308930 60000013 ffffffff [ 2.232453] [<c030c694>] (__irq_svc) from [<c0308930>] (arch_cpu_idle+0x38/0x3c) [ 2.240202] [<c0308930>] (arch_cpu_idle) from [<c0378b98>] (cpu_startup_entry+0x1bc/0x220) [ 2.248864] [<c0378b98>] (cpu_startup_entry) from [<c1100c4c>] (start_kernel+0x370/0x37c) [ 2.257430] [<c1100c4c>] (start_kernel) from [<8020807c>] (0x8020807c) [ 2.264269] ---[ end Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b [ 2.264269]

[PYBOOT] [beagleboard-x15 00:25]: got exception: panic ~$off

[PYBOOT] [beagleboard-x15 00:27]: Done. Board beagleboard-x15-arm-multi_v7_nosmp_defconfig failure log: -------------------------------------------------

[ 1.736388] Stack: (0xee07fdd0 to 0xee080000) [ 1.740936] fdc0: 00000002 00000000 a0000053 ee188410 [ 1.749481] fde0: 00000000 c10a5ea4 ee479280 c113ae14 ee479480 ee188410 0000a1ff 00000000 [ 1.758030] fe00: fa484d00 00000000 00000000 00000000 00000000 fa484800 fa484a00 00000000 [ 1.766583] fe20: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 48486000 [ 1.775133] fe40: 00000000 00000000 00000000 00000000 ee1892d0 ee188410 ee188410 c10a5eb8 [ 1.783679] fe60: fffffdfb 00000000 00000000 00000000 00000000 c0700c64 c0700c18 ee188410 [ 1.792230] fe80: c11382e0 c11382e8 c10a5eb8 c06ff3cc 00000000 ee188410 c10a5eb8 ee188444 [ 1.800784] fea0: c1097ea8 c10fe000 000000fc c06ff524 00000000 c10a5eb8 c06ff478 c06fd868 [ 1.809332] fec0: ee05934c ee1846b0 c10a5eb8 ee552f00 00000000 c06fe9c4 c0dec1e8 c0f8a830 [ 1.817879] fee0: c10a5eb8 c10a5eb8 c0f3897c c0f8a830 c10fe000 c06ffd20 c10a5ea4 c0fed9ec [ 1.826425] ff00: c0f3897c c0301c48 ee004f00 c112371c ee055e00 c0b06f44 00000000 00000000 [ 1.834972] ff20: 0000e000 c042cf28 000004e7 c0e87d94 c0b1c39c c034cd24 00000000 00000000 [ 1.843524] ff40: c0dfcef0 00000000 00000006 00000006 00000000 00000000 c0fed9ec 00000006 [ 1.852068] ff60: c0f8a830 c10fe000 c10fe000 000000fc c0f8a838 c0f00d84 00000006 00000006 [ 1.860620] ff80: 00000000 c0f005a4 00000000 c0a90e08 00000000 00000000 00000000 00000000 [ 1.869173] ffa0: 00000000 c0a90e10 00000000 c0307b58 00000000 00000000 00000000 00000000 [ 1.877715] ffc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 [ 1.886267] ffe0: 00000000 00000000 00000000 00000000 00000013 00000000 ffffffff 00000000 [ 1.894830] [<c0813780>] (cpsw_probe) from [<c0700c64>] (platform_drv_probe+0x4c/0xb0) [ 1.903108] [<c0700c64>] (platform_drv_probe) from [<c06ff3cc>] (driver_probe_device+0x214/0x2c0) [ 1.912396] [<c06ff3cc>] (driver_probe_device) from [<c06ff524>] (__driver_attach+0xac/0xb0) [ 1.921227] [<c06ff524>] (__driver_attach) from [<c06fd868>] (bus_for_each_dev+0x6c/0xa0) [ 1.929775] [<c06fd868>] (bus_for_each_dev) from [<c06fe9c4>] (bus_add_driver+0x1a0/0x218) [ 1.938421] [<c06fe9c4>] (bus_add_driver) from [<c06ffd20>] (driver_register+0x78/0xf8) [ 1.946796] [<c06ffd20>] (driver_register) from [<c0301c48>] (do_one_initcall+0x40/0x170) [ 1.955353] [<c0301c48>] (do_one_initcall) from [<c0f00d84>] (kernel_init_freeable+0x138/0x1d8) [ 1.964450] [<c0f00d84>] (kernel_init_freeable) from [<c0a90e10>] (kernel_init+0x8/0x110) [ 1.973005] [<c0a90e10>] (kernel_init) from [<c0307b58>] (ret_from_fork+0x14/0x3c) [ 1.980928] Code: e5837010 e7816000 e2800028 e5832004 (e1d721be) [ 1.987301] ---[ end trace cb88537fdc8fa204 ]--- [ 1.992146] Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b [ 1.992146] [ 2.001705] ---[ end Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b [ 2.001705]

[PYBOOT] [beagleboard-x15 00:50]: got exception: panic ~$off

[PYBOOT] [beagleboard-x15 00:51]: Done. Board beagleboard-x15-arm-omap2plus_defconfig failure log: -------------------------------------------------

[ 2.684781] omap_hsmmc 4809c000.mmc: GPIO lookup for consumer cd [ 2.691101] omap_hsmmc 4809c000.mmc: using device tree for GPIO lookup [ 2.697972] of_get_named_gpiod_flags: parsed 'cd-gpios' property of node '/ocp/mmc@4809c000[0]' - status (0) [ 2.708379] omap_hsmmc 4809c000.mmc: Got CD GPIO [ 2.713228] omap_hsmmc 4809c000.mmc: GPIO lookup for consumer wp [ 2.719545] omap_hsmmc 4809c000.mmc: using device tree for GPIO lookup [ 2.726393] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@4809c000[0]' [ 2.735979] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@4809c000[0]' [ 2.745481] omap_hsmmc 4809c000.mmc: using lookup tables for GPIO lookup [ 2.752541] omap_hsmmc 4809c000.mmc: lookup for GPIO wp failed [ 2.799133] omap_hsmmc 480b4000.mmc: GPIO lookup for consumer cd [ 2.805425] omap_hsmmc 480b4000.mmc: using device tree for GPIO lookup [ 2.812296] of_get_named_gpiod_flags: can't parse 'cd-gpios' property of node '/ocp/mmc@480b4000[0]' [ 2.821887] of_get_named_gpiod_flags: can't parse 'cd-gpio' property of node '/ocp/mmc@480b4000[0]' [ 2.831384] omap_hsmmc 480b4000.mmc: using lookup tables for GPIO lookup [ 2.838429] omap_hsmmc 480b4000.mmc: lookup for GPIO cd failed [ 2.844544] omap_hsmmc 480b4000.mmc: GPIO lookup for consumer wp [ 2.850858] omap_hsmmc 480b4000.mmc: using device tree for GPIO lookup [ 2.857698] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@480b4000[0]' [ 2.867296] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@480b4000[0]' [ 2.876798] omap_hsmmc 480b4000.mmc: using lookup tables for GPIO lookup [ 2.883836] omap_hsmmc 480b4000.mmc: lookup for GPIO wp failed [ 2.929419] hctosys: unable to open rtc device (rtc0) [ 2.934718] sr_init: No PMIC hook to init smartreflex [ 2.940252] sr_init: platform driver register failed for SR [ 2.986939] aic_dvdd_fixed: disabling [ 2.992201] ldousb: disabling [ 3.000483] Waiting for root device /dev/mmcblk0p1... [ 3.050795] mmc1: new high speed MMC card at address 0001 [ 3.058560] mmcblk1: mmc1:0001 S10004 3.56 GiB [ 3.063972] mmcblk1boot0: mmc1:0001 S10004 partition 1 4.00 MiB [ 3.070789] mmcblk1boot1: mmc1:0001 S10004 partition 2 4.00 MiB [ 3.079336] mmcblk1: p1

[PYBOOT] [beagleboard-x15 01:41]: Timed out waiting for "<type 'str'>":

[PYBOOT] [beagleboard-x15 01:42]: got exception: timeout ~$off

[PYBOOT] [beagleboard-x15 01:44]: Done. Board beaver-arm-multi_v7_defconfig failure log: -------------------------------------------------

[ 3.580053] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt [ 3.586572] pcie_pme 0000:00:01.0:pcie01: service driver pcie_pme loaded [ 3.593444] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 3.599027] r8169 0000:01:00.0: enabling device (0140 -> 0143) [ 3.606132] r8169 0000:01:00.0 eth0: RTL8168evl/8111evl at 0xf09f2000, 02:04:4b:01:60:99, XID 0c900800 IRQ 375 [ 3.616131] r8169 0000:01:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko] [ 3.628231] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 3.634845] [drm] No driver support for vblank timestamp query. [ 3.640789] drm drm: No connectors reported connected with modes [ 3.646793] [drm] Cannot find any crtc or sizes - going 1024x768 [ 3.673219] Console: switching to colour frame buffer device 128x48 [ 3.685273] drm drm: fb0: frame buffer device [ 3.703769] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 3.714672] utmi_phy_clk_enable: timeout waiting for phy to stabilize [ 3.721133] tegra-ehci 7d004000.usb: EHCI Host Controller [ 3.726545] tegra-ehci 7d004000.usb: new USB bus registered, assigned bus number 1 [ 3.734385] tegra-ehci 7d004000.usb: irq 343, io mem 0x7d004000 [ 3.748782] tegra-ehci 7d004000.usb: USB 2.0 started, EHCI 1.00 [ 3.756020] hub 1-0:1.0: USB hub found [ 3.759798] hub 1-0:1.0: 1 port detected [ 3.764773] tegra-ehci 7d008000.usb: EHCI Host Controller [ 3.770186] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 2 [ 3.777925] tegra-ehci 7d008000.usb: irq 344, io mem 0x7d008000 [ 3.793773] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.00 [ 3.800931] hub 2-0:1.0: USB hub found [ 3.804701] hub 2-0:1.0: 1 port detected [ 3.813441] tps65910-rtc tps65910-rtc: setting system clock to 2000-01-01 00:00:02 UTC (946684802) [ 3.827009] vdd_sata,avdd_plle: disabling [ 3.831833] usb1_vbus: disabling [ 3.835889] Waiting for root device /dev/mmcblk0p1... [ 4.113778] usb 2-1: new high-speed USB device number 2 using tegra-ehci [ 5.059396] asix 2-1:1.0 eth1: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 58:6d:8f:50:ba:18 [ 76.498777] random: nonblocking pool is initialized

[PYBOOT] [beaver 01:53]: Timed out waiting for "<type 'str'>":

[PYBOOT] [beaver 01:54]: got exception: timeout ~$off

[PYBOOT] [beaver 01:55]: Done. Board beaver-arm-multi_v7_nosmp_defconfig failure log: -------------------------------------------------

[ 3.472448] pcieport 0000:00:01.0: Signaling PME through PCIe PME interrupt [ 3.479401] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt [ 3.485917] pcie_pme 0000:00:01.0:pcie01: service driver pcie_pme loaded [ 3.492747] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 3.498331] r8169 0000:01:00.0: enabling device (0140 -> 0143) [ 3.504942] r8169 0000:01:00.0 eth0: RTL8168evl/8111evl at 0xf087e000, 02:04:4b:01:60:99, XID 0c900800 IRQ 375 [ 3.514935] r8169 0000:01:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko] [ 3.525288] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 3.531907] [drm] No driver support for vblank timestamp query. [ 3.537840] drm drm: No connectors reported connected with modes [ 3.543842] [drm] Cannot find any crtc or sizes - going 1024x768 [ 3.563216] Console: switching to colour frame buffer device 128x48 [ 3.575003] drm drm: fb0: frame buffer device [ 3.579440] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 3.589314] utmi_phy_clk_enable: timeout waiting for phy to stabilize [ 3.595761] tegra-ehci 7d004000.usb: EHCI Host Controller [ 3.601167] tegra-ehci 7d004000.usb: new USB bus registered, assigned bus number 1 [ 3.608891] tegra-ehci 7d004000.usb: irq 343, io mem 0x7d004000 [ 3.622836] tegra-ehci 7d004000.usb: USB 2.0 started, EHCI 1.00 [ 3.629201] hub 1-0:1.0: USB hub found [ 3.632965] hub 1-0:1.0: 1 port detected [ 3.637616] tegra-ehci 7d008000.usb: EHCI Host Controller [ 3.643023] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 2 [ 3.650683] tegra-ehci 7d008000.usb: irq 344, io mem 0x7d008000 [ 3.662833] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.00 [ 3.669144] hub 2-0:1.0: USB hub found [ 3.672902] hub 2-0:1.0: 1 port detected [ 3.680368] tps65910-rtc tps65910-rtc: setting system clock to 2000-01-01 00:00:02 UTC (946684802) [ 3.693574] vdd_sata,avdd_plle: disabling [ 3.697963] usb1_vbus: disabling [ 3.701857] Waiting for root device /dev/mmcblk0p1... [ 3.982838] usb 2-1: new high-speed USB device number 2 using tegra-ehci [ 4.921380] asix 2-1:1.0 eth1: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 58:6d:8f:50:ba:18

[PYBOOT] [beaver 01:45]: Timed out waiting for "<type 'str'>":

[PYBOOT] [beaver 01:46]: got exception: timeout ~$off

[PYBOOT] [beaver 01:47]: Done. Board beaver-arm-tegra_defconfig failure log: -------------------------------------------------

[ 3.694217] pcie_pme 0000:00:01.0:pcie01: service driver pcie_pme loaded [ 3.701175] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 3.706779] r8169 0000:01:00.0: enabling device (0140 -> 0143) [ 3.714306] r8169 0000:01:00.0 eth0: RTL8168evl/8111evl at 0xf087e000, 02:04:4b:01:60:99, XID 0c900800 IRQ 375 [ 3.724308] r8169 0000:01:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko] [ 3.737216] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 3.743863] [drm] No driver support for vblank timestamp query. [ 3.749858] drm drm: No connectors reported connected with modes [ 3.755884] [drm] Cannot find any crtc or sizes - going 1024x768 [ 3.781648] Console: switching to colour frame buffer device 128x48 [ 3.793466] drm drm: fb0: frame buffer device [ 3.820801] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 3.830085] utmi_phy_clk_enable: timeout waiting for phy to stabilize [ 3.836563] tegra-ehci 7d004000.usb: EHCI Host Controller [ 3.841995] tegra-ehci 7d004000.usb: new USB bus registered, assigned bus number 1 [ 3.849976] tegra-ehci 7d004000.usb: irq 343, io mem 0x7d004000 [ 3.870797] tegra-ehci 7d004000.usb: USB 2.0 started, EHCI 1.00 [ 3.878536] hub 1-0:1.0: USB hub found [ 3.882334] hub 1-0:1.0: 1 port detected [ 3.887164] tegra-ehci 7d008000.usb: EHCI Host Controller [ 3.892608] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 2 [ 3.900473] tegra-ehci 7d008000.usb: irq 344, io mem 0x7d008000 [ 3.920793] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.00 [ 3.928384] hub 2-0:1.0: USB hub found [ 3.932171] hub 2-0:1.0: 1 port detected [ 3.940418] tps65910-rtc tps65910-rtc: setting system clock to 2000-01-01 00:00:02 UTC (946684802) [ 3.959002] vdd_sata,avdd_plle: disabling [ 3.963512] usb1_vbus: disabling [ 3.966924] ALSA device list: [ 3.969881] #0: NVIDIA Tegra Beaver [ 3.974120] Waiting for root device /dev/mmcblk0p1... [ 4.250798] usb 2-1: new high-speed USB device number 2 using tegra-ehci [ 5.236250] asix 2-1:1.0 eth1: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 58:6d:8f:50:ba:18

[PYBOOT] [beaver 01:43]: Timed out waiting for "<type 'str'>":

[PYBOOT] [beaver 01:44]: got exception: timeout ~$off

[PYBOOT] [beaver 01:45]: Done. Board colombus-arm-multi_v7_nosmp_defconfig failure log: -------------------------------------------------

[....] Activating swap...[?25l[?1c7[ ok 8[?25h[?0cdone. [ 41.845187] EXT4-fs (mmcblk0p1): warning: mounting fs with errors, running e2fsck is recommended [ 41.859538] EXT4-fs (mmcblk0p1): re-mounted. Opts: (null) [....] Cleaning up temporary files... /tmp[?25l[?1c7[ ok 8[?25h[?0c. [....] Activating lvm and md swap...[?25l[?1c7[ ok 8[?25h[?0cdone. [....] Checking file systems...fsck from util-linux 2.20.1 [?25l[?1c7[ ok 8[?25h[?0cdone. [....] Mounting local filesystems...[?25l[?1c7[ ok 8[?25h[?0cdone. [....] Activating swapfile swap...[?25l[?1c7[ ok 8[?25h[?0cdone. [....] Cleaning up temporary files...[?25l[?1c7[ ok 8[?25h[?0c. [....] Setting kernel variables ...[?25l[?1c7[ ok 8[?25h[?0cdone. [ 85.469595] random: dd urandom read with 59 bits of entropy available [....] Configuring network interfaces...Internet Systems Consortium DHCP Client 4.2.2 Copyright 2004-2011 Internet Systems Consortium. All rights reserved. For info, please visit https://www.isc.org/software/dhcp/

[ 89.894207] eth0: device MAC address d6:46:5f:de:6a:b5 [ 90.049913] RX IPC Checksum Offload disabled [ 90.054540] No MAC Management Counters available [ 90.060307] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready Listening on LPF/eth0/d6:46:5f:de:6a:b5 Sending on LPF/eth0/d6:46:5f:de:6a:b5 Sending on Socket/fallback DHCPREQUEST on eth0 to 255.255.255.255 port 67 DHCPREQUEST on eth0 to 255.255.255.255 port 67 DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 7 DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 12 DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 9 DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 9 DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 8 DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 8 DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 7

[PYBOOT] [colombus 03:18]: Timed out waiting for "<type 'str'>":

[PYBOOT] [colombus 03:19]: got exception: timeout ~$off

[PYBOOT] [colombus 03:20]: Done. Board cosmic-arm-imx_v6_v7_defconfig failure log: -------------------------------------------------

[ 14.458387] blk_update_request: I/O error, dev mmcblk0, sector 3633185 [ 18.532621] mmcblk0: error -110 transferring data, sector 3633186, nr 230, cmd response 0x900, card status 0x0 [ 18.542948] blk_update_request: I/O error, dev mmcblk0, sector 3633186 [ 22.617186] mmcblk0: error -110 transferring data, sector 3633187, nr 229, cmd response 0x900, card status 0x0 [ 22.627508] blk_update_request: I/O error, dev mmcblk0, sector 3633187 [ 26.701746] mmcblk0: error -110 transferring data, sector 3633188, nr 228, cmd response 0x900, card status 0x0 [ 26.712070] blk_update_request: I/O error, dev mmcblk0, sector 3633188 [ 30.786329] mmcblk0: error -110 transferring data, sector 3633189, nr 227, cmd response 0x900, card status 0x0 [ 30.796656] blk_update_request: I/O error, dev mmcblk0, sector 3633189 [ 34.870901] mmcblk0: error -110 transferring data, sector 3633190, nr 226, cmd response 0x900, card status 0x0 [ 34.881232] blk_update_request: I/O error, dev mmcblk0, sector 3633190 [ 38.955475] mmcblk0: error -110 transferring data, sector 3633191, nr 225, cmd response 0x900, card status 0x0 [ 38.965803] blk_update_request: I/O error, dev mmcblk0, sector 3633191 [ 43.040009] mmcblk0: error -110 transferring data, sector 3633192, nr 224, cmd response 0x900, card status 0x0 [ 43.050372] blk_update_request: I/O error, dev mmcblk0, sector 3633192 [ 47.124611] mmcblk0: error -110 transferring data, sector 3633193, nr 223, cmd response 0x900, card status 0x0 [ 47.134930] blk_update_request: I/O error, dev mmcblk0, sector 3633193 [ 51.209103] mmcblk0: error -110 transferring data, sector 3633194, nr 222, cmd response 0x900, card status 0x0 [ 51.219423] blk_update_request: I/O error, dev mmcblk0, sector 3633194 [ 55.293654] mmcblk0: error -110 transferring data, sector 3633195, nr 221, cmd response 0x900, card status 0x0 [ 55.303975] blk_update_request: I/O error, dev mmcblk0, sector 3633195 [ 59.378148] mmcblk0: error -110 transferring data, sector 3633196, nr 220, cmd response 0x900, card status 0x0 [ 59.388469] blk_update_request: I/O error, dev mmcblk0, sector 3633196 [ 63.462702] mmcblk0: error -110 transferring data, sector 3633197, nr 219, cmd response 0x900, card status 0x0 [ 63.473024] blk_update_request: I/O error, dev mmcblk0, sector 3633197 [ 67.547259] mmcblk0: error -110 transferring data, sector 3633198, nr 218, cmd response 0x900, card status 0x0 [ 67.557584] blk_update_request: I/O error, dev mmcblk0, sector 3633198 [ 71.631815] mmcblk0: error -110 transferring data, sector 3633199, nr 217, cmd response 0x900, card status 0x0 [ 71.642138] blk_update_request: I/O error, dev mmcblk0, sector 3633199 [ 75.716384] mmcblk0: error -110 transferring data, sector 3633200, nr 216, cmd response 0x900, card status 0x0 [ 75.726710] blk_update_request: I/O error, dev mmcblk0, sector 3633200 [ 79.800944] mmcblk0: error -110 transferring data, sector 3633201, nr 215, cmd response 0x900, card status 0x0 [ 79.811271] blk_update_request: I/O error, dev mmcblk0, sector 3633201

[PYBOOT] [cosmic 01:58]: Timed out waiting for "<type 'str'>":

[PYBOOT] [cosmic 01:59]: got exception: timeout ~$off

[PYBOOT] [cosmic 02:00]: Done. Board cosmic-arm-multi_v7_defconfig failure log: -------------------------------------------------

[ 14.188250] blk_update_request: I/O error, dev mmcblk0, sector 3633185 [ 18.262225] mmcblk0: error -110 transferring data, sector 3633186, nr 230, cmd response 0x900, card status 0x0 [ 18.272300] blk_update_request: I/O error, dev mmcblk0, sector 3633186 [ 22.346342] mmcblk0: error -110 transferring data, sector 3633187, nr 229, cmd response 0x900, card status 0x0 [ 22.356408] blk_update_request: I/O error, dev mmcblk0, sector 3633187 [ 26.430388] mmcblk0: error -110 transferring data, sector 3633188, nr 228, cmd response 0x900, card status 0x0 [ 26.440464] blk_update_request: I/O error, dev mmcblk0, sector 3633188 [ 30.514436] mmcblk0: error -110 transferring data, sector 3633189, nr 227, cmd response 0x900, card status 0x0 [ 30.524536] blk_update_request: I/O error, dev mmcblk0, sector 3633189 [ 34.598515] mmcblk0: error -110 transferring data, sector 3633190, nr 226, cmd response 0x900, card status 0x0 [ 34.608579] blk_update_request: I/O error, dev mmcblk0, sector 3633190 [ 38.682549] mmcblk0: error -110 transferring data, sector 3633191, nr 225, cmd response 0x900, card status 0x0 [ 38.692622] blk_update_request: I/O error, dev mmcblk0, sector 3633191 [ 42.766599] mmcblk0: error -110 transferring data, sector 3633192, nr 224, cmd response 0x900, card status 0x0 [ 42.776674] blk_update_request: I/O error, dev mmcblk0, sector 3633192 [ 46.850650] mmcblk0: error -110 transferring data, sector 3633193, nr 223, cmd response 0x900, card status 0x0 [ 46.860725] blk_update_request: I/O error, dev mmcblk0, sector 3633193 [ 50.934703] mmcblk0: error -110 transferring data, sector 3633194, nr 222, cmd response 0x900, card status 0x0 [ 50.944776] blk_update_request: I/O error, dev mmcblk0, sector 3633194 [ 55.018753] mmcblk0: error -110 transferring data, sector 3633195, nr 221, cmd response 0x900, card status 0x0 [ 55.028829] blk_update_request: I/O error, dev mmcblk0, sector 3633195 [ 59.102802] mmcblk0: error -110 transferring data, sector 3633196, nr 220, cmd response 0x900, card status 0x0 [ 59.112878] blk_update_request: I/O error, dev mmcblk0, sector 3633196 [ 63.186850] mmcblk0: error -110 transferring data, sector 3633197, nr 219, cmd response 0x900, card status 0x0 [ 63.196930] blk_update_request: I/O error, dev mmcblk0, sector 3633197 [ 67.270902] mmcblk0: error -110 transferring data, sector 3633198, nr 218, cmd response 0x900, card status 0x0 [ 67.280981] blk_update_request: I/O error, dev mmcblk0, sector 3633198 [ 71.354953] mmcblk0: error -110 transferring data, sector 3633199, nr 217, cmd response 0x900, card status 0x0 [ 71.365032] blk_update_request: I/O error, dev mmcblk0, sector 3633199 [ 75.439009] mmcblk0: error -110 transferring data, sector 3633200, nr 216, cmd response 0x900, card status 0x0 [ 75.449093] blk_update_request: I/O error, dev mmcblk0, sector 3633200 [ 79.523052] mmcblk0: error -110 transferring data, sector 3633201, nr 215, cmd response 0x900, card status 0x0 [ 79.533121] blk_update_request: I/O error, dev mmcblk0, sector 3633201

[PYBOOT] [cosmic 02:16]: Timed out waiting for "<type 'str'>":

[PYBOOT] [cosmic 02:17]: got exception: timeout ~$off

[PYBOOT] [cosmic 02:18]: Done. Board cosmic-arm-multi_v7_nosmp_defconfig failure log: -------------------------------------------------

[ 13.946595] blk_update_request: I/O error, dev mmcblk0, sector 3633185 [ 18.020505] mmcblk0: error -110 transferring data, sector 3633186, nr 230, cmd response 0x900, card status 0x0 [ 18.030558] blk_update_request: I/O error, dev mmcblk0, sector 3633186 [ 22.104467] mmcblk0: error -110 transferring data, sector 3633187, nr 229, cmd response 0x900, card status 0x0 [ 22.114522] blk_update_request: I/O error, dev mmcblk0, sector 3633187 [ 26.188429] mmcblk0: error -110 transferring data, sector 3633188, nr 228, cmd response 0x900, card status 0x0 [ 26.198488] blk_update_request: I/O error, dev mmcblk0, sector 3633188 [ 30.272395] mmcblk0: error -110 transferring data, sector 3633189, nr 227, cmd response 0x900, card status 0x0 [ 30.282452] blk_update_request: I/O error, dev mmcblk0, sector 3633189 [ 34.356359] mmcblk0: error -110 transferring data, sector 3633190, nr 226, cmd response 0x900, card status 0x0 [ 34.366417] blk_update_request: I/O error, dev mmcblk0, sector 3633190 [ 38.440335] mmcblk0: error -110 transferring data, sector 3633191, nr 225, cmd response 0x900, card status 0x0 [ 38.450399] blk_update_request: I/O error, dev mmcblk0, sector 3633191 [ 42.524313] mmcblk0: error -110 transferring data, sector 3633192, nr 224, cmd response 0x900, card status 0x0 [ 42.534367] blk_update_request: I/O error, dev mmcblk0, sector 3633192 [ 46.608272] mmcblk0: error -110 transferring data, sector 3633193, nr 223, cmd response 0x900, card status 0x0 [ 46.618322] blk_update_request: I/O error, dev mmcblk0, sector 3633193 [ 50.692225] mmcblk0: error -110 transferring data, sector 3633194, nr 222, cmd response 0x900, card status 0x0 [ 50.702276] blk_update_request: I/O error, dev mmcblk0, sector 3633194 [ 54.776181] mmcblk0: error -110 transferring data, sector 3633195, nr 221, cmd response 0x900, card status 0x0 [ 54.786241] blk_update_request: I/O error, dev mmcblk0, sector 3633195 [ 58.860150] mmcblk0: error -110 transferring data, sector 3633196, nr 220, cmd response 0x900, card status 0x0 [ 58.870207] blk_update_request: I/O error, dev mmcblk0, sector 3633196 [ 62.944117] mmcblk0: error -110 transferring data, sector 3633197, nr 219, cmd response 0x900, card status 0x0 [ 62.954172] blk_update_request: I/O error, dev mmcblk0, sector 3633197 [ 67.028081] mmcblk0: error -110 transferring data, sector 3633198, nr 218, cmd response 0x900, card status 0x0 [ 67.038136] blk_update_request: I/O error, dev mmcblk0, sector 3633198 [ 71.112047] mmcblk0: error -110 transferring data, sector 3633199, nr 217, cmd response 0x900, card status 0x0 [ 71.122100] blk_update_request: I/O error, dev mmcblk0, sector 3633199 [ 75.196013] mmcblk0: error -110 transferring data, sector 3633200, nr 216, cmd response 0x900, card status 0x0 [ 75.206074] blk_update_request: I/O error, dev mmcblk0, sector 3633200 [ 79.279981] mmcblk0: error -110 transferring data, sector 3633201, nr 215, cmd response 0x900, card status 0x0 [ 79.290040] blk_update_request: I/O error, dev mmcblk0, sector 3633201

[PYBOOT] [cosmic 02:00]: Timed out waiting for "<type 'str'>":

[PYBOOT] [cosmic 02:01]: got exception: timeout ~$off

[PYBOOT] [cosmic 02:02]: Done. Board dalmore-arm-multi_lpae_defconfig failure log: -------------------------------------------------

[ 2.910744] can: netlink gateway (rev 20130117) max_hops=1 [ 2.917691] Key type dns_resolver registered [ 2.924174] ThumbEE CPU extension supported. [ 2.928565] Registering SWP/SWPB emulation handler [ 2.947699] usb1_vbus: supplied by vdd-sys-5v0 [ 2.958405] usb2_vbus: supplied by vdd-sys-5v0 [ 2.977673] VDD_5V0_HDMI_CON: supplied by vdd-sys-5v0 [ 2.998305] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 3.005089] [drm] No driver support for vblank timestamp query. [ 3.029357] mmc1: new high speed MMC card at address 0001 [ 3.038960] mmcblk1: mmc1:0001 SEM32G 29.1 GiB [ 3.047065] mmcblk1boot0: mmc1:0001 SEM32G partition 1 4.00 MiB [ 3.056955] mmcblk1boot1: mmc1:0001 SEM32G partition 2 4.00 MiB [ 3.066667] mmcblk1rpmb: mmc1:0001 SEM32G partition 3 4.00 MiB [ 3.076890] mmcblk1: p1 [ 3.185824] Console: switching to colour frame buffer device 240x75 [ 3.273829] drm drm: fb0: frame buffer device [ 3.293778] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 3.308711] tegra-ehci 7d008000.usb: EHCI Host Controller [ 3.314290] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 1 [ 3.323069] tegra-ehci 7d008000.usb: irq 339, io mem 0x7d008000 [ 3.338807] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.10 [ 3.349240] hub 1-0:1.0: USB hub found [ 3.353236] hub 1-0:1.0: 1 port detected [ 3.363906] input: gpio-keys as /devices/soc0/gpio-keys/input/input0 [ 3.378678] palmas-rtc 7000d000.i2c:tps65913@58:rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800) [ 3.440326] dvdd_ts: disabling [ 3.443541] usb1_vbus: disabling [ 3.446800] vdd_cam_1v8_reg: disabling [ 3.454364] Waiting for root device /dev/mmcblk0p1... [ 3.668831] usb 1-1: new high-speed USB device number 2 using tegra-ehci [ 4.647661] asix 1-1:1.0 eth0: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 48:f8:b3:2b:29:1f [ 60.038798] random: nonblocking pool is initialized

[PYBOOT] [dalmore 01:58]: Timed out waiting for "<type 'str'>":

[PYBOOT] [dalmore 01:59]: got exception: timeout ~$off

[PYBOOT] [dalmore 02:00]: Done. Board dalmore-arm-multi_v7_defconfig failure log: -------------------------------------------------

[ 2.910776] can: netlink gateway (rev 20130117) max_hops=1 [ 2.917821] Key type dns_resolver registered [ 2.924326] ThumbEE CPU extension supported. [ 2.928713] Registering SWP/SWPB emulation handler [ 2.946769] usb1_vbus: supplied by vdd-sys-5v0 [ 2.957317] usb2_vbus: supplied by vdd-sys-5v0 [ 2.977928] VDD_5V0_HDMI_CON: supplied by vdd-sys-5v0 [ 3.000813] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 3.007560] [drm] No driver support for vblank timestamp query. [ 3.029844] mmc1: new high speed MMC card at address 0001 [ 3.039727] mmcblk1: mmc1:0001 SEM32G 29.1 GiB [ 3.046835] mmcblk1boot0: mmc1:0001 SEM32G partition 1 4.00 MiB [ 3.055352] mmcblk1boot1: mmc1:0001 SEM32G partition 2 4.00 MiB [ 3.064827] mmcblk1rpmb: mmc1:0001 SEM32G partition 3 4.00 MiB [ 3.075552] mmcblk1: p1 [ 3.188323] Console: switching to colour frame buffer device 240x75 [ 3.275529] drm drm: fb0: frame buffer device [ 3.293857] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 3.308860] tegra-ehci 7d008000.usb: EHCI Host Controller [ 3.314440] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 1 [ 3.323240] tegra-ehci 7d008000.usb: irq 339, io mem 0x7d008000 [ 3.338871] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.10 [ 3.349420] hub 1-0:1.0: USB hub found [ 3.353414] hub 1-0:1.0: 1 port detected [ 3.364067] input: gpio-keys as /devices/soc0/gpio-keys/input/input0 [ 3.377847] palmas-rtc 7000d000.i2c:tps65913@58:rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800) [ 3.440377] dvdd_ts: disabling [ 3.443597] usb1_vbus: disabling [ 3.446856] vdd_cam_1v8_reg: disabling [ 3.454281] Waiting for root device /dev/mmcblk0p1... [ 3.668893] usb 1-1: new high-speed USB device number 2 using tegra-ehci [ 4.652392] asix 1-1:1.0 eth0: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 48:f8:b3:2b:29:1f [ 63.523856] random: nonblocking pool is initialized

[PYBOOT] [dalmore 01:57]: Timed out waiting for "<type 'str'>":

[PYBOOT] [dalmore 01:58]: got exception: timeout ~$off

[PYBOOT] [dalmore 01:59]: Done. Board dalmore-arm-multi_v7_nosmp_defconfig failure log: -------------------------------------------------

[ 2.426617] can: raw protocol (rev 20120528) [ 2.430936] can: broadcast manager protocol (rev 20120528 t) [ 2.436654] can: netlink gateway (rev 20130117) max_hops=1 [ 2.443203] Key type dns_resolver registered [ 2.448208] ThumbEE CPU extension supported. [ 2.470199] usb1_vbus: supplied by vdd-sys-5v0 [ 2.478520] usb2_vbus: supplied by vdd-sys-5v0 [ 2.492770] VDD_5V0_HDMI_CON: supplied by vdd-sys-5v0 [ 2.518339] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 2.525022] [drm] No driver support for vblank timestamp query. [ 2.689912] Console: switching to colour frame buffer device 240x75 [ 2.778437] drm drm: fb0: frame buffer device [ 2.783167] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 2.793937] tegra-ehci 7d008000.usb: EHCI Host Controller [ 2.799488] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 1 [ 2.807878] mmc1: new high speed MMC card at address 0001 [ 2.814410] tegra-ehci 7d008000.usb: irq 339, io mem 0x7d008000 [ 2.820733] mmcblk1: mmc1:0001 SEM32G 29.1 GiB [ 2.825567] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.10 [ 2.831895] mmcblk1boot0: mmc1:0001 SEM32G partition 1 4.00 MiB [ 2.840237] hub 1-0:1.0: USB hub found [ 2.844387] mmcblk1boot1: mmc1:0001 SEM32G partition 2 4.00 MiB [ 2.850616] hub 1-0:1.0: 1 port detected [ 2.858069] input: gpio-keys as /devices/soc0/gpio-keys/input/input0 [ 2.864982] mmcblk1rpmb: mmc1:0001 SEM32G partition 3 4.00 MiB [ 2.872864] mmcblk1: p1 [ 2.879381] palmas-rtc 7000d000.i2c:tps65913@58:rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800) [ 2.920357] dvdd_ts: disabling [ 2.923515] usb1_vbus: disabling [ 2.926832] vdd_cam_1v8_reg: disabling [ 2.932173] Waiting for root device /dev/mmcblk0p1... [ 3.160688] usb 1-1: new high-speed USB device number 2 using tegra-ehci [ 4.113012] asix 1-1:1.0 eth0: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 48:f8:b3:2b:29:1f

[PYBOOT] [dalmore 01:50]: Timed out waiting for "<type 'str'>":

[PYBOOT] [dalmore 01:51]: got exception: timeout ~$off

[PYBOOT] [dalmore 01:52]: Done. Board dalmore-arm-tegra_defconfig failure log: -------------------------------------------------

[ 2.916335] Bluetooth: RFCOMM socket layer initialized [ 2.921583] Bluetooth: RFCOMM ver 1.11 [ 2.925494] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 2.930890] Bluetooth: BNEP socket layer initialized [ 2.935943] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 2.941943] Bluetooth: HIDP socket layer initialized [ 2.948803] Key type dns_resolver registered [ 2.958269] Registering SWP/SWPB emulation handler [ 2.975105] usb1_vbus: supplied by vdd-sys-5v0 [ 2.984594] usb2_vbus: supplied by vdd-sys-5v0 [ 3.000531] VDD_5V0_HDMI_CON: supplied by vdd-sys-5v0 [ 3.027998] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 3.034649] [drm] No driver support for vblank timestamp query. [ 3.212776] Console: switching to colour frame buffer device 240x75 [ 3.299308] drm drm: fb0: frame buffer device [ 3.325608] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 3.334837] tegra-ehci 7d008000.usb: EHCI Host Controller [ 3.340692] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 1 [ 3.349948] tegra-ehci 7d008000.usb: irq 339, io mem 0x7d008000 [ 3.375617] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.10 [ 3.389233] hub 1-0:1.0: USB hub found [ 3.393187] hub 1-0:1.0: 1 port detected [ 3.406819] input: gpio-keys as /devices/soc0/gpio-keys/input/input1 [ 3.422018] palmas-rtc 7000d000.i2c:tps65913@58:rtc: setting system clock to 2000-01-01 00:00:01 UTC (946684801) [ 3.515544] dvdd_ts: disabling [ 3.518660] usb1_vbus: disabling [ 3.521924] vdd_cam_1v8_reg: disabling [ 3.526649] ALSA device list: [ 3.529643] #0: NVIDIA Tegra Dalmore [ 3.535677] Waiting for root device /dev/mmcblk0p1... [ 3.715611] usb 1-1: new high-speed USB device number 2 using tegra-ehci [ 4.749647] asix 1-1:1.0 eth0: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 48:f8:b3:2b:29:1f [ 61.505574] random: nonblocking pool is initialized

[PYBOOT] [dalmore 01:48]: Timed out waiting for "<type 'str'>":

[PYBOOT] [dalmore 01:49]: got exception: timeout ~$off

[PYBOOT] [dalmore 01:50]: Done. Board odroidu3-arm-exynos_defconfig failure log: -------------------------------------------------

[ 1.746700] usbcore: registered new interface driver usbhid [ 1.748791] usbhid: USB HID core driver [ 1.756606] NET: Registered protocol family 10 [ 1.757514] sit: IPv6 over IPv4 tunneling driver [ 1.762068] NET: Registered protocol family 17 [ 1.766057] NET: Registered protocol family 15 [ 1.771519] Key type dns_resolver registered [ 1.776831] Registering SWP/SWPB emulation handler [ 1.780630] s3c-rtc 10070000.rtc: rtc disabled, re-enabling [ 1.785246] s3c-rtc 10070000.rtc: rtc core: registered s3c as rtc1 [ 1.806344] mmc_host mmc1: Bus speed (slot 0) = 44000000Hz (slot req 52000000Hz, actual 44000000HZ div = 0) [ 1.810596] mmc_host mmc1: Bus speed (slot 0) = 73333333Hz (slot req 52000000Hz, actual 36666666HZ div = 1) [ 1.813165] max98090 1-0010: MAX98090 REVID=0x43 [ 1.815396] max98090 1-0010: use default 2.8v micbias [ 1.827971] usb 1-3: New USB device found, idVendor=0424, idProduct=3503 [ 1.827977] usb 1-3: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.828578] hub 1-3:1.0: USB hub found [ 1.828714] hub 1-3:1.0: 3 ports detected [ 1.844409] asoc-simple-card sound: HiFi <-> 3830000.i2s mapping ok [ 1.858272] input: gpio_keys as /devices/platform/gpio_keys/input/input0 [ 1.864617] mmc1: new DDR MMC card at address 0001 [ 1.869486] mmcblk1: mmc1:0001 008G92 7.28 GiB [ 1.873748] mmcblk1boot0: mmc1:0001 008G92 partition 1 4.00 MiB [ 1.879610] mmcblk1boot1: mmc1:0001 008G92 partition 2 4.00 MiB [ 1.885513] mmcblk1rpmb: mmc1:0001 008G92 partition 3 512 KiB [ 1.892058] mmcblk1: p1 p2 [ 1.897377] max77686-rtc max77686-rtc: setting system clock to 2000-01-01 01:00:19 UTC (946688419) [ 1.918709] VDD10_HDMI_1.0V: disabling [ 1.919411] vdd_g3d: disabling [ 1.920478] BUCK8_2.8V: disabling [ 1.924455] ALSA device list: [ 1.926095] #0: Odroid-U3 [ 1.929835] Waiting for root device /dev/mmcblk0p2...

[PYBOOT] [odroidu3 01:53]: Timed out waiting for "<type 'str'>":

[PYBOOT] [odroidu3 01:54]: got exception: timeout ~$off

[PYBOOT] [odroidu3 01:55]: Done. Board pi-arm-multi_lpae_defconfig failure log: -------------------------------------------------

[ 1.638031] isl29018 7-0044: No cache defaults, reading back from HW [ 1.644387] isl29018 7-0044: Failed to read 1: -6 [ 1.648971] isl29018 7-0044: regmap initialization fails: -6 [ 1.659259] NET: Registered protocol family 10 [ 1.663670] sit: IPv6 over IPv4 tunneling driver [ 1.667264] NET: Registered protocol family 17 [ 1.671262] can: controller area network core (rev 20120528 abi 9) [ 1.677451] NET: Registered protocol family 29 [ 1.681840] can: raw protocol (rev 20120528) [ 1.686090] can: broadcast manager protocol (rev 20120528 t) [ 1.691732] can: netlink gateway (rev 20130117) max_hops=1 [ 1.697451] Key type dns_resolver registered [ 1.701767] ThumbEE CPU extension supported. [ 1.705681] Registering SWP/SWPB emulation handler [ 1.714865] dwmmc_exynos 12210000.mmc: IDMAC supports 32-bit address mode. [ 1.720350] dwmmc_exynos 12210000.mmc: Using internal DMA controller. [ 1.726710] dwmmc_exynos 12210000.mmc: Version ID is 250a [ 1.732084] dwmmc_exynos 12210000.mmc: DW MMC controller at irq 70,64 bit host data width,64 deep fifo [ 1.742153] input: gpio-keys as /devices/platform/gpio-keys/input/input1 [ 1.751768] dwmmc_exynos 12210000.mmc: IDMAC supports 32-bit address mode. [ 1.757200] mmc_host mmc0: Bus speed (slot 0) = 200000000Hz (slot req 200000000Hz, actual 200000000HZ div = 0) [ 1.767407] dwmmc_exynos 12210000.mmc: Using internal DMA controller. [ 1.773580] dwmmc_exynos 12210000.mmc: Version ID is 250a [ 1.778957] dwmmc_exynos 12210000.mmc: DW MMC controller at irq 70,64 bit host data width,64 deep fifo [ 1.788676] max77686-rtc max77802-rtc: hctosys: unable to read the hardware clock [ 1.810855] Waiting for root device /dev/mmcblk0p1... [ 1.814736] mmc0: tuning execution failed: -5 [ 1.818787] mmc0: error -5 whilst initialising MMC card [ 2.688033] asix 1-1:1.0 eth0: register 'asix' at usb-xhci-hcd.2.auto-1, ASIX AX88772 USB 2.0 Ethernet, c8:b3:73:46:fb:95 [ 2.701423] dwmmc_exynos 12210000.mmc: IDMAC supports 32-bit address mode. [ 2.706883] dwmmc_exynos 12210000.mmc: Using internal DMA controller. [ 2.713253] dwmmc_exynos 12210000.mmc: Version ID is 250a [ 2.718637] dwmmc_exynos 12210000.mmc: DW MMC controller at irq 70,64 bit host data width,64 deep fifo

[PYBOOT] [pi 01:53]: Timed out waiting for "<type 'str'>":

[PYBOOT] [pi 01:54]: got exception: timeout ~$off

[PYBOOT] [pi 01:55]: Done. Board snow-arm-multi_v7_nosmp_defconfig failure log: -------------------------------------------------

[ 0.056188] dma-pl330 121a0000.pdma: Loaded driver for PL330 DMAC-241330 [ 0.056195] dma-pl330 121a0000.pdma: DBUFF-32x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32 [ 0.057179] dma-pl330 121b0000.pdma: Loaded driver for PL330 DMAC-241330 [ 0.057184] dma-pl330 121b0000.pdma: DBUFF-32x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32 [ 0.057492] dma-pl330 10800000.mdma: Loaded driver for PL330 DMAC-241330 [ 0.057497] dma-pl330 10800000.mdma: DBUFF-64x8bytes Num_Chans-8 Num_Peri-1 Num_Events-32 [ 0.057795] dma-pl330 11c10000.mdma: Loaded driver for PL330 DMAC-241330 [ 0.057800] dma-pl330 11c10000.mdma: DBUFF-64x8bytes Num_Chans-8 Num_Peri-1 Num_Events-32 [ 0.059256] P1.8V_LDO_OUT2: Bringing 1500000uV into 1800000-1800000uV [ 0.093335] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [ 0.094396] 12c00000.serial: ttySAC0 at MMIO 0x12c00000 (irq = 56, base_baud = 0) is a S3C6400/10 [ 0.094530] 12c10000.serial: ttySAC1 at MMIO 0x12c10000 (irq = 57, base_baud = 0) is a S3C6400/10 [ 0.094658] 12c20000.serial: ttySAC2 at MMIO 0x12c20000 (irq = 58, base_baud = 0) is a S3C6400/10 [ 0.094783] 12c30000.serial: ttySAC3 at MMIO 0x12c30000 (irq = 59, base_baud = 0) is a S3C6400/10 [ 1.157151] console [ttySAC3] enabled [ 1.161322] msm_serial: driver initialized [ 1.164960] STMicroelectronics ASC driver initialized [ 1.170615] [drm] Initialized drm 1.1.0 20060810 [ 1.178119] loop: module loaded [ 1.182442] libphy: Fixed MDIO Bus: probed [ 1.185312] CAN device driver interface [ 1.189489] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.3.0-k [ 1.195819] igb: Copyright (c) 2007-2014 Intel Corporation. [ 1.202506] pegasus: v0.9.3 (2013/04/25), Pegasus/Pegasus II USB Ethernet driver [ 1.208774] usbcore: registered new interface driver pegasus [ 1.214415] usbcore: registered new interface driver asix [ 1.219790] usbcore: registered new interface driver ax88179_178a [ 1.225867] usbcore: registered new interface driver cdc_ether [ 1.231689] usbcore: registered new interface driver smsc75xx [ 1.237422] usbcore: registered new interface driver smsc95xx [ 1.243143] usbcore: registered new interface driver net1080 [ 1.248782] usbcore: registered new interface driver cdc_subset [ 1.254684] usbcore: registered new interface driver zaurus [ 1.260253] usbcore: registered new interface driver cdc_ncm [ 1.266324] usb_phy_generic.0.auto supply vcc not found, using dummy regulator [ 1.273148] usb_phy_generic.1.auto supply vcc not fo [PYBOOT] [snow 13:43]: got exception: maximum recursion depth exceeded ~$off

[PYBOOT] [snow 13:44]: Done. Board snowball-arm-multi_v7_defconfig failure log: -------------------------------------------------

[ 2.016021] ledtrig-cpu: registered to indicate activity on CPUs [ 2.022521] usbcore: registered new interface driver usbhid [ 2.028106] usbhid: USB HID core driver [ 2.036560] NET: Registered protocol family 10 [ 2.041931] sit: IPv6 over IPv4 tunneling driver [ 2.047180] NET: Registered protocol family 17 [ 2.051666] can: controller area network core (rev 20120528 abi 9) [ 2.057922] NET: Registered protocol family 29 [ 2.062377] can: raw protocol (rev 20120528) [ 2.066650] can: broadcast manager protocol (rev 20120528 t) [ 2.072326] can: netlink gateway (rev 20130117) max_hops=1 [ 2.078338] Key type dns_resolver registered [ 2.082794] ThumbEE CPU extension supported. [ 2.083801] mmc3: new high speed MMC card at address 0001 [ 2.084320] mmcblk3: mmc3:0001 3.53 GiB [ 2.084533] mmcblk3boot0: mmc3:0001 partition 1 2.00 MiB [ 2.084716] mmcblk3boot1: mmc3:0001 partition 2 2.00 MiB [ 2.084899] mmcblk3rpmb: mmc3:0001 partition 3 128 KiB [ 2.089874] mmcblk3: p1 p2 p3 p4 [ 2.115905] Registering SWP/SWPB emulation handler [ 2.123046] input: gpio_keys as /devices/soc0/gpio_keys/input/input0 [ 2.129821] rtc-pl031 80154000.rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800) [ 2.139038] thermal cooling_device0: thermal-cpufreq-0 bind to 0: 0-succeed [ 2.146057] thermal cooling_device0: thermal-cpufreq-0 bind to 1: 0-succeed [ 2.153045] thermal cooling_device0: thermal-cpufreq-0 bind to 2: 0-succeed [ 2.160034] db8500-cpufreq-cooling soc:cpufreq-cooling: Cooling device registered: thermal-cpufreq-0 [ 2.173339] db8500-esram12: disabling [ 2.177337] db8500-esram34: disabling [ 2.181732] V-CSI/DSI: disabling [ 2.185150] mmci-reg: disabling [ 2.189605] uart-pl011 80007000.uart: DMA channel TX dma0chan20 [ 2.195739] uart-pl011 80007000.uart: DMA channel RX dma0chan21 [ 2.202056] Waiting for root device /dev/mmcblk0p4...

[PYBOOT] [snowball 02:08]: Timed out waiting for "<type 'str'>":

[PYBOOT] [snowball 02:09]: got exception: timeout ~$off

[PYBOOT] [snowball 02:10]: Done. Board snowball-arm-multi_v7_nosmp_defconfig failure log: -------------------------------------------------

[ 1.987945] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.995391] ledtrig-cpu: registered to indicate activity on CPUs [ 2.001708] usbcore: registered new interface driver usbhid [ 2.007293] usbhid: USB HID core driver [ 2.014373] NET: Registered protocol family 10 [ 2.069641] sit: IPv6 over IPv4 tunneling driver [ 2.074798] NET: Registered protocol family 17 [ 2.079284] can: controller area network core (rev 20120528 abi 9) [ 2.085510] NET: Registered protocol family 29 [ 2.089935] can: raw protocol (rev 20120528) [ 2.094207] can: broadcast manager protocol (rev 20120528 t) [ 2.099884] can: netlink gateway (rev 20130117) max_hops=1 [ 2.105773] Key type dns_resolver registered [ 2.110198] ThumbEE CPU extension supported. [ 2.161407] input: gpio_keys as /devices/soc0/gpio_keys/input/input0 [ 2.174102] rtc-pl031 80154000.rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800) [ 2.183166] thermal cooling_device0: thermal-cpufreq-0 bind to 0: 0-succeed [ 2.190155] thermal cooling_device0: thermal-cpufreq-0 bind to 1: 0-succeed [ 2.197143] thermal cooling_device0: thermal-cpufreq-0 bind to 2: 0-succeed [ 2.204132] db8500-cpufreq-cooling soc:cpufreq-cooling: Cooling device registered: thermal-cpufreq-0 [ 2.216125] db8500-esram12: disabling [ 2.268920] db8500-esram34: disabling [ 2.290649] V-CSI/DSI: disabling [ 2.298889] mmci-reg: disabling [ 2.302459] uart-pl011 80007000.uart: DMA channel TX dma0chan20 [ 2.308410] uart-pl011 80007000.uart: DMA channel RX dma0chan21 [ 2.329589] Waiting for root device /dev/mmcblk0p4... [ 3.137786] mmc3: new high speed MMC card at address 0001 [ 3.149627] mmcblk3: mmc3:0001 3.53 GiB [ 3.158782] mmcblk3boot0: mmc3:0001 partition 1 2.00 MiB [ 3.169311] mmcblk3boot1: mmc3:0001 partition 2 2.00 MiB [ 3.183837] mmcblk3rpmb: mmc3:0001 partition 3 128 KiB [ 3.190643] mmcblk3: p1 p2 p3 p4

[PYBOOT] [snowball 01:57]: Timed out waiting for "<type 'str'>":

[PYBOOT] [snowball 01:58]: got exception: timeout ~$off

[PYBOOT] [snowball 01:59]: Done.