Full logs are available at http://arm-soc.lixom.net/bootlogs/mainline/v4.8-rc7-168-gd0c1d15/

Failed boards:

arndale arm-multi_v7_nosmp_defconfig : FAILED 2:18.44 beaver arm-tegra_defconfig : FAILED 1:45.29 beaver arm-multi_v7_defconfig : FAILED 1:45.98 beaver arm-multi_v7_nosmp_defconfig : FAILED 1:48.56 capri bcm_defconfig : NO BUILD chitra powerpc-ppc64_defconfig : FAILED 1:55.97 colombus arm-multi_v7_nosmp_defconfig : FAILED 3:20.89 minnowmax minnowmax_defconfig : NO BUILD odroidu3 arm-exynos_defconfig : FAILED 1:53.07 omap5uevm arm-multi_v7_defconfig : FAILED 0:50.78 omap5uevm arm-multi_lpae_defconfig : FAILED 2:08.11 pi arm-multi_v7_nosmp_defconfig : FAILED 1:47.87 snow arm-multi_v7_nosmp_defconfig : FAILED 1:49.96 snowball arm-u8500_defconfig : FAILED 1:55.68 wandboard arm-imx_v6_v7_defconfig : FAILED 3:01.79

Successful boards:

apc arm-vt8500_v6_v7_defconfig : passed 1:12.81 arndale arm-exynos_defconfig : passed 1:34.02 arndale arm-multi_v7_defconfig : passed 1:48.99 arndale arm-multi_lpae_defconfig : passed 1:35.78 bbb arm-omap2plus_defconfig : passed 1:43.41 bbb arm-multi_v7_defconfig : passed 1:20.97 bbb arm-multi_v7_nosmp_defconfig : passed 1:18.72 beagleboard-x15 arm-omap2plus_defconfig : passed 0:50.04 beagleboard-x15 arm-multi_v7_defconfig : passed 0:47.62 beagleboard-x15 arm-multi_lpae_defconfig : passed 0:47.44 beagleboard-x15 arm-multi_v7_nosmp_defconfig : warnings 0:58.78 capri arm-multi_v7_defconfig : passed 0:49.36 capri arm-multi_v7_nosmp_defconfig : warnings 0:51.88 chitra powerpc-pasemi_defconfig : passed 1:36.81 colombus arm-sunxi_defconfig : passed 2:03.19 colombus arm-multi_v7_defconfig : passed 2:21.60 colombus arm-multi_lpae_defconfig : passed 2:19.19 cosmic arm-imx_v6_v7_defconfig : passed 3:21.36 cosmic arm-multi_v7_defconfig : passed 2:54.76 cosmic arm-multi_v7_nosmp_defconfig : passed 2:42.03 cubie arm-sunxi_defconfig : passed 0:50.99 cubie arm-multi_v7_defconfig : passed 0:55.01 cubie arm-multi_v7_nosmp_defconfig : passed 0:59.68 cubie2 arm-sunxi_defconfig : passed 0:51.43 cubie2 arm-multi_v7_defconfig : passed 0:55.61 cubie2 arm-multi_lpae_defconfig : passed 0:51.43 cubie2 arm-multi_v7_nosmp_defconfig : warnings 1:04.17 cubox arm-multi_v7_defconfig : passed 1:15.19 cubox arm-mvebu_v7_defconfig : passed 1:06.54 cubox arm-multi_v7_nosmp_defconfig : passed 1:26.03 jetsontk1 arm-tegra_defconfig : passed 0:51.02 jetsontk1 arm-multi_v7_defconfig : passed 0:47.53 jetsontk1 arm-multi_lpae_defconfig : passed 0:54.92 jetsontk1 arm-multi_v7_nosmp_defconfig : warnings 0:45.22 omap5uevm arm-omap2plus_defconfig : passed 1:08.57 omap5uevm arm-multi_v7_nosmp_defconfig : warnings 1:07.31 pandaes arm-omap2plus_defconfig : warnings 1:43.71 pandaes arm-multi_v7_defconfig : passed 1:33.95 pandaes arm-multi_v7_nosmp_defconfig : warnings 1:39.52 pi arm-exynos_defconfig : passed 2:10.89 pi arm-multi_v7_defconfig : passed 2:13.45 pi arm-multi_lpae_defconfig : passed 2:21.30 pit arm-exynos_defconfig : passed 2:11.40 pit arm-multi_v7_defconfig : passed 2:15.15 pit arm-multi_lpae_defconfig : passed 2:30.11 pit arm-multi_v7_nosmp_defconfig : warnings 2:11.84 seaboard arm-tegra_defconfig : passed 1:03.89 seaboard arm-multi_v7_defconfig : passed 1:04.25 seaboard arm-multi_v7_nosmp_defconfig : warnings 1:01.81 seattle arm64-defconfig : warnings 2:27.84 snow arm-exynos_defconfig : passed 2:12.84 snow arm-multi_v7_defconfig : passed 2:02.46 snow arm-multi_lpae_defconfig : passed 1:56.43 snowball arm-multi_v7_defconfig : passed 1:13.40 snowball arm-multi_v7_nosmp_defconfig : warnings 1:15.72 trimslice arm-tegra_defconfig : passed 2:40.05 trimslice arm-multi_v7_defconfig : passed 2:50.44 trimslice arm-multi_v7_nosmp_defconfig : warnings 1:31.11 wandboard arm-multi_v7_defconfig : passed 1:39.39 wandboard arm-multi_v7_nosmp_defconfig : warnings 1:05.16

Offline boards:

colibri-vf61 arm-imx_v6_v7_defconfig : OFFLINE 2:13.57 colibri-vf61 arm-multi_v7_defconfig : OFFLINE 2:24.38 colibri-vf61 arm-multi_v7_nosmp_defconfig : OFFLINE 2:15.18 dalmore arm-tegra_defconfig : OFFLINE 2:19.68 dalmore arm-multi_v7_defconfig : OFFLINE 2:27.42 dalmore arm-multi_lpae_defconfig : OFFLINE 2:23.41 dalmore arm-multi_v7_nosmp_defconfig : OFFLINE 2:19.10 hummingboard arm-imx_v6_v7_defconfig : OFFLINE 2:28.99 hummingboard arm-multi_v7_defconfig : OFFLINE 2:16.06 hummingboard arm-multi_v7_nosmp_defconfig : OFFLINE 2:11.84 parallella arm-multi_v7_defconfig : OFFLINE 2:22.76 parallella arm-multi_v7_nosmp_defconfig : OFFLINE 2:16.29 rk3288evb arm-multi_v7_defconfig : OFFLINE 0:46.06 rk3288evb arm-multi_lpae_defconfig : OFFLINE 1:07.73 rk3288evb arm-multi_v7_nosmp_defconfig : OFFLINE 0:42.37 sama5 arm-sama5_defconfig : OFFLINE 2:20.26 sama5d3-xplained arm-sama5_defconfig : OFFLINE 2:39.59 socfpga arm-socfpga_defconfig : OFFLINE 2:19.63 socfpga arm-multi_v7_defconfig : OFFLINE 2:31.57 socfpga arm-multi_v7_nosmp_defconfig : OFFLINE 2:14.93

Board legend is available at http://arm-soc.lixom.net/boards.html

Board arndale-arm-multi_v7_nosmp_defconfig failure log: -------------------------------------------------

[ 2.400277] [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 4.8.0-rc7-00168-gd0c1d15 (build@brutus) (gcc version 6.1.0 (GCC) ) #1 Fri Sep 23 16:42:26 PDT 2016 [ 0.000000] CPU: ARMv7 Processor [410fc0f4] revision 4 (ARMv7), cr=10c53c7d [ 0.000000] CPU: div instructions available: patching division code [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache [ 2.477238] [c11c31d8] *pgd=4100040e(bad) [ 0.000000] OF: fdt:Machine model: Insignal Arndale evaluation board based on EXYNOS5250 [ 0.000000] Reserved memory: created DMA memory pool at 0xbf800000, size 8 MiB [ 2.496508] Modules linked in: [ 0.000000] OF: reserved mem: initialized node region_mfc_right, compatible id shared-dma-pool [ 0.000000] Reserved memory: created DMA memory pool at 0xbe800000, size 16 MiB [ 0.000000] OF: reserved mem: initialized node region_mfc_left, compatible id shared-dma-pool [ 0.000000] cma: Reserved 64 MiB at 0xba800000 [ 0.000000] Memory policy: Data cache writeback [ 0.000000] Samsung CPU ID: 0x43520010 [ 0.000000] On node 0 totalpages: 518144 [ 0.000000] free_area_init_node: node 0, pgdat c120ee34, node_mem_map ef028000 [ 0.000000] DMA zone: 1536 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 196608 pages, LIFO batch:31 [ 0.000000] HighMem zone: 321536 pages, LIFO batch:31 [ 0.000000] ------------[ cut here ]------------ [ 0.000000] WARNING: CPU: 0 PID: 0 at /work/build/batch/arch/arm/kernel/devtree.c:150 arm_dt_init_cpu_maps+0xe4/0x148 [ 0.000000] DT /cpu 2 nodes greater than max cores 1, capping them [ 0.000000] Modules linked in: [ 0.000000] CPU: 0 PID: 0 Comm: swapper Not tainted 4.8.0-rc7-00168-gd0c1d15 #1 [ 0.000000] Hardware name: SAMSUNG EXYNOS (Flattened Device Tree) [ 0.000000] [<c030e9b4>] (unwind_backtrace) from [<c030b458>] (show_stack+0x10/0x14) [ 0.000000] [<c030b458>] (show_stack) from [<c033851c>] (__warn+0xe4/0xfc) [ 0.000000] [<c033851c>] (__warn) from [<c033856c>] (warn_slowpath_fmt+0x38/0x48) [ 0.000000] [<c033856c>] (warn_slowpath_fmt) from [<c1004fc8>] (arm_dt_init_cpu_maps+0xe4/0x148) [ 0.000000] [<c1004fc8>] (arm_dt_init_cpu_maps) from [<c1004198>] (setup_arch+0x804/0xa10)

[PYBOOT] [arndale 02:15]: Timed out waiting for "<type 'str'>":

[PYBOOT] [arndale 02:16]: got exception: timeout ~$off

[PYBOOT] [arndale 02:17]: Done. Board beaver-arm-multi_v7_defconfig failure log: -------------------------------------------------

[ 3.298106] pcieport 0000:00:01.0: Signaling PME through PCIe PME interrupt [ 3.305063] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt [ 3.311584] pcie_pme 0000:00:01.0:pcie001: service driver pcie_pme loaded [ 3.318547] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 3.324136] r8169 0000:01:00.0: enabling device (0140 -> 0143) [ 3.331123] r8169 0000:01:00.0 eth0: RTL8168evl/8111evl at 0xf09f2000, 02:04:4b:01:60:99, XID 0c900800 IRQ 375 [ 3.341121] r8169 0000:01:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko] [ 3.352892] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 3.359508] [drm] No driver support for vblank timestamp query. [ 3.365451] drm drm: No connectors reported connected with modes [ 3.371457] [drm] Cannot find any crtc or sizes - going 1024x768 [ 3.397461] Console: switching to colour frame buffer device 128x48 [ 3.409439] drm drm: fb0: frame buffer device [ 3.428991] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 3.439745] utmi_phy_clk_enable: timeout waiting for phy to stabilize [ 3.446213] tegra-ehci 7d004000.usb: EHCI Host Controller [ 3.451624] tegra-ehci 7d004000.usb: new USB bus registered, assigned bus number 1 [ 3.459447] tegra-ehci 7d004000.usb: irq 343, io mem 0x7d004000 [ 3.478703] tegra-ehci 7d004000.usb: USB 2.0 started, EHCI 1.00 [ 3.485802] hub 1-0:1.0: USB hub found [ 3.489575] hub 1-0:1.0: 1 port detected [ 3.494539] tegra-ehci 7d008000.usb: EHCI Host Controller [ 3.499951] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 2 [ 3.507696] tegra-ehci 7d008000.usb: irq 344, io mem 0x7d008000 [ 3.528699] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.00 [ 3.535667] hub 2-0:1.0: USB hub found [ 3.539435] hub 2-0:1.0: 1 port detected [ 3.548106] tps65910-rtc tps65910-rtc: setting system clock to 2000-01-01 00:00:02 UTC (946684802) [ 3.561871] vdd_sata,avdd_plle: disabling [ 3.566573] usb1_vbus: disabling [ 3.570647] Waiting for root device /dev/mmcblk0p1... [ 3.873704] usb 2-1: new high-speed USB device number 2 using tegra-ehci [ 4.873294] asix 2-1:1.0 eth1: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 58:6d:8f:50:ba:18

[PYBOOT] [beaver 01:43]: Timed out waiting for "<type 'str'>":

[PYBOOT] [beaver 01:44]: got exception: timeout ~$off

[PYBOOT] [beaver 01:45]: Done. Board beaver-arm-multi_v7_nosmp_defconfig failure log: -------------------------------------------------

[ 3.232769] pcieport 0000:00:01.0: Signaling PME through PCIe PME interrupt [ 3.239721] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt [ 3.246237] pcie_pme 0000:00:01.0:pcie001: service driver pcie_pme loaded [ 3.253177] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 3.258759] r8169 0000:01:00.0: enabling device (0140 -> 0143) [ 3.265347] r8169 0000:01:00.0 eth0: RTL8168evl/8111evl at 0xf09f2000, 02:04:4b:01:60:99, XID 0c900800 IRQ 375 [ 3.275339] r8169 0000:01:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko] [ 3.285584] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 3.292198] [drm] No driver support for vblank timestamp query. [ 3.298133] drm drm: No connectors reported connected with modes [ 3.304141] [drm] Cannot find any crtc or sizes - going 1024x768 [ 3.323522] Console: switching to colour frame buffer device 128x48 [ 3.335301] drm drm: fb0: frame buffer device [ 3.339739] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 3.349861] utmi_phy_clk_enable: timeout waiting for phy to stabilize [ 3.356317] tegra-ehci 7d004000.usb: EHCI Host Controller [ 3.361722] tegra-ehci 7d004000.usb: new USB bus registered, assigned bus number 1 [ 3.369434] tegra-ehci 7d004000.usb: irq 343, io mem 0x7d004000 [ 3.388153] tegra-ehci 7d004000.usb: USB 2.0 started, EHCI 1.00 [ 3.394510] hub 1-0:1.0: USB hub found [ 3.398276] hub 1-0:1.0: 1 port detected [ 3.402982] tegra-ehci 7d008000.usb: EHCI Host Controller [ 3.408389] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 2 [ 3.416042] tegra-ehci 7d008000.usb: irq 344, io mem 0x7d008000 [ 3.433152] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.00 [ 3.439424] hub 2-0:1.0: USB hub found [ 3.443183] hub 2-0:1.0: 1 port detected [ 3.450668] tps65910-rtc tps65910-rtc: setting system clock to 2000-01-01 00:00:02 UTC (946684802) [ 3.463789] vdd_sata,avdd_plle: disabling [ 3.468181] usb1_vbus: disabling [ 3.472091] Waiting for root device /dev/mmcblk0p1... [ 3.773154] usb 2-1: new high-speed USB device number 2 using tegra-ehci [ 4.761739] asix 2-1:1.0 eth1: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 58:6d:8f:50:ba:18

[PYBOOT] [beaver 01:45]: Timed out waiting for "<type 'str'>":

[PYBOOT] [beaver 01:46]: got exception: timeout ~$off

[PYBOOT] [beaver 01:48]: Done. Board beaver-arm-tegra_defconfig failure log: -------------------------------------------------

[ 6.944251] pcie_pme 0000:00:01.0:pcie001: service driver pcie_pme loaded [ 6.951307] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 6.956912] r8169 0000:01:00.0: enabling device (0140 -> 0143) [ 6.964418] r8169 0000:01:00.0 eth0: RTL8168evl/8111evl at 0xf087e000, 02:04:4b:01:60:99, XID 0c900800 IRQ 375 [ 6.974417] r8169 0000:01:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko] [ 6.987450] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 6.994069] [drm] No driver support for vblank timestamp query. [ 7.000067] drm drm: No connectors reported connected with modes [ 7.006077] [drm] Cannot find any crtc or sizes - going 1024x768 [ 7.033584] Console: switching to colour frame buffer device 128x48 [ 7.045380] drm drm: fb0: frame buffer device [ 7.091127] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 7.100273] utmi_phy_clk_enable: timeout waiting for phy to stabilize [ 7.106750] tegra-ehci 7d004000.usb: EHCI Host Controller [ 7.112181] tegra-ehci 7d004000.usb: new USB bus registered, assigned bus number 1 [ 7.120134] tegra-ehci 7d004000.usb: irq 343, io mem 0x7d004000 [ 7.151139] tegra-ehci 7d004000.usb: USB 2.0 started, EHCI 1.00 [ 7.159067] hub 1-0:1.0: USB hub found [ 7.162847] hub 1-0:1.0: 1 port detected [ 7.167640] tegra-ehci 7d008000.usb: EHCI Host Controller [ 7.173065] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 2 [ 7.180960] tegra-ehci 7d008000.usb: irq 344, io mem 0x7d008000 [ 7.211129] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.00 [ 7.218915] hub 2-0:1.0: USB hub found [ 7.222691] hub 2-0:1.0: 1 port detected [ 7.230868] tps65910-rtc tps65910-rtc: setting system clock to 2000-01-01 00:00:03 UTC (946684803) [ 7.249094] vdd_sata,avdd_plle: disabling [ 7.253574] usb1_vbus: disabling [ 7.256963] ALSA device list: [ 7.259921] #0: NVIDIA Tegra Beaver [ 7.264124] Waiting for root device /dev/mmcblk0p1... [ 7.581132] usb 2-1: new high-speed USB device number 2 using tegra-ehci [ 8.680466] asix 2-1:1.0 eth1: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 58:6d:8f:50:ba:18

[PYBOOT] [beaver 01:41]: Timed out waiting for "<type 'str'>":

[PYBOOT] [beaver 01:42]: got exception: timeout ~$off

[PYBOOT] [beaver 01:43]: Done. Board chitra-powerpc-ppc64_defconfig failure log: -------------------------------------------------

PID hash table entries: 4096 (order: 3, 32768 bytes) Sorting __ex_table... Memory: 4023680K/4194304K available (10012K kernel code, 1748K rwdata, 3432K rodata, 4204K init, 1027K bss, 170624K reserved, 0K cma-reserved) SLUB: HWalign=128, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 Hierarchical RCU implementation. Build-time adjustment of leaf fanout to 64. RCU restricting CPUs from NR_CPUS=32 to nr_cpu_ids=2. RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=2 NR_IRQS:512 nr_irqs:512 16 OpenPIC addr: fc000000 mpic: Setting up MPIC "PASEMI-OPIC" version 1.3 at fc000000, max 2 CPUs mpic: ISU size: 1024, shift: 10, mask: 3ff mpic: Initializing for 1024 sources time_init: decrementer frequency = 66.666666 MHz time_init: processor frequency = 2000.000000 MHz clocksource: timebase: mask: 0xffffffffffffffff max_cycles: 0xf6018975a, max_idle_ns: 440795204712 ns clocksource: timebase mult[f000003] shift[24] registered clockevent: decrementer mult[1111110e] shift[32] cpu[0] Console: colour dummy device 80x25 pid_max: default: 32768 minimum: 301 Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) Mount-cache hash table entries: 8192 (order: 4, 65536 bytes) Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes) mpic: requesting IPIs... Brought up 2 CPUs devtmpfs: initialized clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns kworker/u4:0 (22) used greatest stack depth: 12992 bytes left NET: Registered protocol family 16 eeh_init: Platform EEH operation not found IBM eBus Device Driver cpuidle: using governor menu kworker/u4:0 (39) used greatest stack d [PYBOOT] [chitra 01:53]: Timed out waiting for "<type 'str'>":

[PYBOOT] [chitra 01:54]: got exception: timeout ~$off

[PYBOOT] [chitra 01:55]: Done. Board colombus-arm-multi_v7_nosmp_defconfig failure log: -------------------------------------------------

[?25l[?1c7[ ok 8[?25h[?0c. [....] Synthesizing the initial hotplug events...[?25l[?1c7[ ok 8[?25h[?0cdone. [....] Waiting for /dev to be fully populated...[?25l[?1c7[ ok 8[?25h[?0cdone. [....] Activating swap...[?25l[?1c7[ ok 8[?25h[?0cdone. [ 45.045182] EXT4-fs (mmcblk0p1): warning: mounting fs with errors, running e2fsck is recommended [ 45.059641] EXT4-fs (mmcblk0p1): re-mounted. Opts: (null) [....] Cleaning up temporary files... /tmp[?25l[?1c7[ ok 8[?25h[?0c. [....] Activating lvm and md swap...[?25l[?1c7[ ok 8[?25h[?0cdone. [....] Checking file systems...fsck from util-linux 2.20.1 [?25l[?1c7[ ok 8[?25h[?0cdone. [....] Mounting local filesystems...[?25l[?1c7[ ok 8[?25h[?0cdone. [....] Activating swapfile swap...[?25l[?1c7[ ok 8[?25h[?0cdone. [....] Cleaning up temporary files...[?25l[?1c7[ ok 8[?25h[?0c. [....] Setting kernel variables ...[?25l[?1c7[ ok 8[?25h[?0cdone. [....] Configuring network interfaces...Internet Systems Consortium DHCP Client 4.2.2 Copyright 2004-2011 Internet Systems Consortium. All rights reserved. For info, please visit https://www.isc.org/software/dhcp/

[ 93.236510] eth0: device MAC address aa:d4:15:de:ef:4f [ 93.274381] RX IPC Checksum Offload disabled [ 93.278997] No MAC Management Counters available [ 93.284730] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready Listening on LPF/eth0/aa:d4:15:de:ef:4f Sending on LPF/eth0/aa:d4:15:de:ef:4f Sending on Socket/fallback DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 6 DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 14 DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 14 DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 17 DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 10 No DHCPOFFERS received. No working leases in persistent database - sleeping.

[PYBOOT] [colombus 03:18]: Timed out waiting for "<type 'str'>":

[PYBOOT] [colombus 03:19]: got exception: timeout ~$off

[PYBOOT] [colombus 03:20]: Done. Board odroidu3-arm-exynos_defconfig failure log: -------------------------------------------------

[ 2.172105] Key type dns_resolver registered [ 2.176449] Registering SWP/SWPB emulation handler [ 2.184469] [drm] Exynos DRM: using 12c10000.mixer device for DMA mapping operations [ 2.189029] exynos-drm exynos-drm: bound 12c10000.mixer (ops mixer_component_ops) [ 2.196449] exynos-drm exynos-drm: bound 12d00000.hdmi (ops hdmi_component_ops) [ 2.203744] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 2.210176] [drm] No driver support for vblank timestamp query. [ 2.216197] [drm] Initialized exynos 1.0.0 20110530 on minor 0 [ 2.221922] mmc_host mmc1: Bus speed (slot 0) = 44000000Hz (slot req 52000000Hz, actual 44000000HZ div = 0) [ 2.233287] s3c-rtc 10070000.rtc: rtc disabled, re-enabling [ 2.233326] mmc1: new DDR MMC card at address 0001 [ 2.237258] mmcblk1: mmc1:0001 008G92 7.28 GiB [ 2.237479] mmcblk1boot0: mmc1:0001 008G92 partition 1 4.00 MiB [ 2.237684] mmcblk1boot1: mmc1:0001 008G92 partition 2 4.00 MiB [ 2.237896] mmcblk1rpmb: mmc1:0001 008G92 partition 3 512 KiB [ 2.238996] mmcblk1: p1 p2 [ 2.251800] usb 1-3: New USB device found, idVendor=0424, idProduct=3503 [ 2.251806] usb 1-3: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 2.252456] hub 1-3:1.0: USB hub found [ 2.252543] hub 1-3:1.0: 3 ports detected [ 2.288313] rtc rtc1: invalid alarm value: 1900-1-2 0:0:0 [ 2.293767] s3c-rtc 10070000.rtc: rtc core: registered s3c as rtc1 [ 2.327003] max98090 1-0010: MAX98090 REVID=0x43 [ 2.329306] max98090 1-0010: use default 2.8v micbias [ 2.337316] asoc-simple-card sound: HiFi <-> 3830000.i2s mapping ok [ 2.345710] input: gpio_keys as /devices/platform/gpio_keys/input/input0 [ 2.371090] max77686-rtc max77686-rtc: setting system clock to 2000-01-01 01:00:22 UTC (946688422) [ 2.388075] VDD10_HDMI_1.0V: disabling [ 2.388989] vdd_g3d: disabling [ 2.389835] BUCK8_P3V3: disabling [ 2.393790] ALSA device list: [ 2.395459] #0: Odroid-U3 [ 2.399067] Waiting for root device /dev/mmcblk0p2...

[PYBOOT] [odroidu3 01:50]: Timed out waiting for "<type 'str'>":

[PYBOOT] [odroidu3 01:51]: got exception: timeout ~$off

[PYBOOT] [odroidu3 01:52]: Done. Board omap5uevm-arm-multi_lpae_defconfig failure log: -------------------------------------------------

[ 1.831481] palmas 0-0048: Muxing GPIO 2, PWM 0, LED 0 [ 1.842298] palmas-rtc 48070000.i2c:palmas@48:rtc: rtc core: registered 48070000.i2c:palmas as rtc0 [ 1.857611] SMPS6: supplied by vsys_cobra [ 1.862159] smps6: Bringing 1350000uV into 1200000-1200000uV [ 1.869829] SMPS7: supplied by vsys_cobra [ 1.874204] random: fast init done [ 1.878271] vdds_1v8_main: supplied by smps7 [ 1.883668] SMPS8: supplied by vsys_cobra [ 1.888550] mmc0: new high speed MMC card at address 0001 [ 1.894576] mmcblk0: mmc0:0001 SEM04G 3.69 GiB [ 1.899490] mmcblk0boot0: mmc0:0001 SEM04G partition 1 2.00 MiB [ 1.905833] mmcblk0boot1: mmc0:0001 SEM04G partition 2 2.00 MiB [ 1.912669] SMPS9: supplied by vsys_cobra [ 1.917965] smps9: Bringing 0uV into 2100000-2100000uV [ 1.925996] LDO1: supplied by vsys_cobra [ 1.930416] ldo1: Bringing 0uV into 1800000-1800000uV [ 1.936806] LDO2: supplied by vsys_cobra [ 1.941224] ldo2: Bringing 0uV into 2800000-2800000uV [ 1.947617] LDO3: supplied by vdds_1v8_main [ 1.953651] LDO4: supplied by vdds_1v8_main [ 1.958346] ldo4: Bringing 0uV into 1800000-1800000uV [ 1.964749] LDO5: supplied by vsys_cobra [ 1.970493] LDO6: supplied by vdds_1v8_main [ 1.978022] LDO7: supplied by vsys_cobra [ 1.982447] ldo7: Bringing 0uV into 2000000-2000000uV [ 1.988833] LDO8: supplied by vsys_cobra [ 1.994593] LDO9: supplied by vmmcsd_fixed [ 2.000697] LDOLN: supplied by vsys_cobra [ 2.006533] LDOUSB: supplied by vsys_cobra [ 2.014838] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 2.034662] omap_i2c 4807c000.i2c: bus 4 rev0.12 at 400 kHz [ 2.042457] cpufreq: cpufreq_online: CPU0: Running at unlisted freq: 1100000 KHz [ 2.050330] cpufreq: cpufreq_online: CPU0: Unlisted initial frequency changed to: 1500000 KHz [ 2.060760] Unable to handle kernel paging reques [PYBOOT] [omap5uevm 02:04]: Timed out waiting for "<type 'str'>":

[PYBOOT] [omap5uevm 02:05]: got exception: timeout ~$off

[PYBOOT] [omap5uevm 02:06]: Done. Board omap5uevm-arm-multi_v7_defconfig failure log: -------------------------------------------------

[ 2.183375] 1fe0: c10a6a2c c1207630 8020406a 412fc0f2 00000000 8020807c 00000000 00000000 [ 2.191877] [<c037a74c>] (cpu_startup_entry) from [<c1000c50>] (start_kernel+0x374/0x380) [ 2.200373] [<c1000c50>] (start_kernel) from [<8020807c>] (0x8020807c) [ 2.207152] Code: 00000000 00000000 00000000 00000000 (00000000) [ 2.213484] ---[ end trace 638a2979c5d9b43e ]--- [ 2.218276] Kernel panic - not syncing: Attempted to kill the idle task! [ 2.225238] CPU1: stopping [ 2.228045] CPU: 1 PID: 0 Comm: swapper/1 Tainted: G D 4.8.0-rc7-00168-gd0c1d15 #1 [ [ 2.237271] Unable to handle kernel paging request at virtual address 0000ea8c [ 2.237272] pgd = c0204000 [ 2.237275] [0000ea8c] *pgd=00000000 [ 2.237278] Internal error: Oops: 5 [#2] SMP ARM [ 2.237280] Modules linked in: [ 2.237283] CPU: 1 PID: 0 Comm: swapper/1 Tainted: G D 4.8.0-rc7-00168-gd0c1d15 #1 [ 2.237284] Hardware name: Generic OMAP5 (Flattened Device Tree) [ 2.237287] task: ee0779c0 task.stack: ee09a000 [ 2.237294] PC is at __timer_const_udelay+0x8/0x1c [ 2.237298] LR is at wait_for_xmitr+0x5c/0xd8 [ 2.237302] pc : [<c0595e94>] lr : [<c06faf10>] psr: 20000193 [ 2.237302] sp : ee09bd88 ip : 00000000 fp : 00000004 [ 2.237304] r10: 00000044 r9 : c123ea80 r8 : 0000270f [ 2.237306] r7 : 00000005 r6 : 00063f98 r5 : ee0eb410 r4 : 00000000 [ 2.237308] r3 : 0000ea80 r2 : 00000002 r1 : 00000020 r0 : c123ea80 [ 2.237310] Flags: nzCv IRQs off FIQs on Mode SVC_32 ISA ARM Segment none [ 2.237313] Control: 10c5387d Table: 8020406a DAC: 00000051 [ 2.237315] Process swapper/1 (pid: 0, stack limit = 0xee09a220) [ 2.237317] Stack: (0xee09bd88 to 0xee09c000) [ 2.237321] bd80: 00000020 ee0eb410 ee0eb410 c06faf8c 00000000 c1314c84 [ 2.237325] bda0: 00000044 c06faf9c c1314c88 c1314cc8 ee0eb410 c06d87e8 ee0eb410 00000001 [ 2.237329] bdc0: 60000193 00000001 00000000 c06fb064 00000001 c12a2420 c1314770 ee09a000 [ 2.237334] bde0: c13350b4 00000000 00000044 c06fafb4 00000110 c03847d8 c1319e10 00000044 [ 2.237338] be00: 00000110 00000000 00000000 00000000 c13346f0 c0385340 00000400 00000000 [ 2.237342] be20: 00000111 00000000 c1319e10 c1314770 0000000f 00000000 00000000 60000193 [ 2.237347] be40: c123670c c0e6b280 00000001 ee09a000 c12024a4 00000000 c1314770 00000034 [ 2.237351] be60: c1314770 c123670c c13370b6 00000000 00000000 00000000 00000000 c0385904 [ 2.237355] be80: 00000000 00000000 00000000 00000000 c13370b6 00000034 00000 [PYBOOT] [omap5uevm 00:49]: got exception: panic ~$off

[PYBOOT] [omap5uevm 00:50]: Done. Board pi-arm-multi_v7_nosmp_defconfig failure log: -------------------------------------------------

[ 1.747491] NET: Registered protocol family 17 [ 1.751701] can: controller area network core (rev 20120528 abi 9) [ 1.757876] NET: Registered protocol family 29 [ 1.762280] can: raw protocol (rev 20120528) [ 1.766515] can: broadcast manager protocol (rev 20160617 t) [ 1.772170] can: netlink gateway (rev 20130117) max_hops=1 [ 1.777762] Key type dns_resolver registered [ 1.782218] ThumbEE CPU extension supported. [ 1.789846] dwmmc_exynos 12210000.mmc: IDMAC supports 32-bit address mode. [ 1.795295] dwmmc_exynos 12210000.mmc: Using internal DMA controller. [ 1.801676] dwmmc_exynos 12210000.mmc: Version ID is 250a [ 1.807052] dwmmc_exynos 12210000.mmc: DW MMC controller at irq 79,64 bit host data width,64 deep fifo [ 1.816823] input: gpio-keys as /devices/platform/gpio-keys/input/input1 [ 1.823056] mmc_host mmc0: Bus speed (slot 0) = 200000000Hz (slot req 200000000Hz, actual 200000000HZ div = 0) [ 1.836292] dwmmc_exynos 12210000.mmc: IDMAC supports 32-bit address mode. [ 1.841897] dwmmc_exynos 12210000.mmc: Using internal DMA controller. [ 1.848128] dwmmc_exynos 12210000.mmc: Version ID is 250a [ 1.853495] dwmmc_exynos 12210000.mmc: DW MMC controller at irq 79,64 bit host data width,64 deep fifo [ 1.863154] max77686-rtc max77802-rtc: hctosys: unable to read the hardware clock [ 1.874631] mmc0: tuning execution failed: -5 [ 1.877526] mmc0: error -5 whilst initialising MMC card [ 1.882741] Waiting for root device /dev/mmcblk0p1... [ 2.768202] asix 1-1:1.0 eth0: register 'asix' at usb-xhci-hcd.2.auto-1, ASIX AX88772 USB 2.0 Ethernet, c8:b3:73:46:fb:95 [ 2.781040] dwmmc_exynos 12210000.mmc: IDMAC supports 32-bit address mode. [ 2.786483] dwmmc_exynos 12210000.mmc: Using internal DMA controller. [ 2.792868] dwmmc_exynos 12210000.mmc: Version ID is 250a [ 2.798248] dwmmc_exynos 12210000.mmc: DW MMC controller at irq 79,64 bit host data width,64 deep fifo [ 5.282161] dma-pl330 3880000.adma: Loaded driver for PL330 DMAC-241330 [ 5.287309] dma-pl330 3880000.adma: DBUFF-4x8bytes Num_Chans-6 Num_Peri-16 Num_Events-6 [ 5.298498] dwmmc_exynos 12210000.mmc: IDMAC supports 32-bit address mode. [ 5.303925] dwmmc_exynos 12210000.mmc: Using internal DMA controller. [ 5.310325] dwmmc_exynos 12210000.mmc: Version ID is 250a [ 5.315703] dwmmc_exynos 12210000.mmc: DW MMC controller at irq 79,64 bit host data width,64 deep fifo

[PYBOOT] [pi 01:45]: Timed out waiting for "<type 'str'>":

[PYBOOT] [pi 01:46]: got exception: timeout ~$off

[PYBOOT] [pi 01:47]: Done. Board snow-arm-multi_v7_nosmp_defconfig failure log: -------------------------------------------------

The programs included with the Debian GNU/Linux system are free software; the exact distribution terms for each program are described in the individual files in /usr/share/doc/*/copyright.

Debian GNU/Linux comes with ABSOLUTELY NO WARRANTY, to the extent permitted by applicable law. root@snow:~# cat /proc/cmdline cat /proc/cmdline[ 7.723346] Unable to handle kernel paging request at virtual address c11c31d8 [ 7.729095] pgd = c0204000 [ 7.731785] [c11c31d8] *pgd=4100041e(bad) [ 7.735781] Internal error: Oops: 8000000d [#1] ARM [ 7.740637] Modules linked in: [ 7.743684] CPU: 0 PID: 0 Comm: swapper Tainted: G W 4.8.0-rc7-00168-gd0c1d15 #1 [ 7.752181] Hardware name: SAMSUNG EXYNOS (Flattened Device Tree) [ 7.758259] task: c1105fb8 task.stack: c1100000 [ 7.762775] PC is at 0xc11c31d8 [ 7.765910] LR is at cpu_pm_pmu_notify+0x70/0xb4 [ 7.770503] pc : [<c11c31d8>] lr : [<c0a375dc>] psr: 600001d3 [ 7.770503] sp : c1101f88 ip : 00000000 fp : 000000a0 [ 7.781955] r10: 00000000 r9 : 00000001 r8 : c11c3d20 [ 7.787165] r7 : c11c3ce0 r6 : c11c31e0 r5 : 00000001 r4 : c110212c [ 7.793673] r3 : 00000006 r2 : 00000000 r1 : 00000006 r0 : 00000000 [ 7.800186] Flags: nZCv IRQs off FIQs off Mode SVC_32 ISA ARM Segment none [ 7.807475] Control: 10c53c7d Table: 6d414059 DAC: 00000051 [ 7.813204] Process swapper (pid: 0, stack limit = 0xc1100218) [ 7.819020] Stack: (0xc1101f88 to 0xc1102000) [ 7.823367] 1f80: c1210961 c1102134 c11c31e0 c11c3c80 c1101fac c0b48c10 [ 7.831527] 1fa0: c1100000 c110212c c1101fb4 c0b48e18 00000000 c035b29c ffffffff c1000c40 [ 7.839686] 1fc0: ffffffff ffffffff 00000000 c1000684 00000000 c1091a28 c12121d4 c11020b4 [ 7.847845] 1fe0: c1091a24 c110719c 40204059 410fc0f4 00000000 40208078 00000000 00000000 [ 7.856021] [<c0a375dc>] (cpu_pm_pmu_notify) from [<c0b48c10>] (schedule+0x44/0x9c) [ 7.863646] Code: c11c31c4 c11c3310 c11c3310 00000000 (c11c31e0) [ 7.869716] ---[ end trace e1d20ee040f5fc21 ]--- [ 7.874311] Kernel panic - not syncing: Attempted to kill the idle task! [ 7.880998] ---[ end Kernel panic - not syncing: Attempted to kill the idle task!

[PYBOOT] [snow 01:48]: got exception: ERROR: Timeout waiting for command: cat /proc/cmdline. ~$off

[PYBOOT] [snow 01:49]: Done. Board snowball-arm-u8500_defconfig failure log: -------------------------------------------------

[ERR] [ 2.310485] nmk-i2c 80128000.i2c: write to slave 0x18 timed out [ERR] [ 2.316436] nmk-i2c 80128000.i2c: no ack received after address transmission [ERR] [ 2.530517] nmk-i2c 80128000.i2c: write to slave 0x18 timed out [ERR] [ 2.536468] nmk-i2c 80128000.i2c: no ack received after address transmission [ERR] [ 2.543701] iio iio:device0: failed to read Who-Am-I register. [ERR] [ 2.593444] iio iio:device1: lsm303dlh_magn: WhoAmI mismatch (0x3c). [ERR] [ 2.818817] EXT4-fs (mmcblk3p4): couldn't mount as ext3 due to feature incompatibilities root@snowball:~# dmesg -l warn | awk '{ print "[WARN] " $0 }' dmesg -l warn | awk '{ print "[WARN] " $0 }' [WARN] [ 0.000000] GIC: PPI13 is secure or misconfigured [WARN] [ 0.000000] GIC: PPI13 is secure or misconfigured [WARN] [ 0.110351] GIC: PPI13 is secure or misconfigured [WARN] [ 0.158294] "Battery level lower than power on reset threshold" [WARN] [ 0.158325] "Vbus Detect (USB)" [WARN] [ 0.173675] irq: no irq domain found for /soc/gpio@8000e100 ! [WARN] [ 0.962646] V-CSI/DSI: Failed to create debugfs directory [WARN] [ 1.327545] irq: type mismatch, failed to map hwirq-12 for /soc/gpio@8000e100! [WARN] [ 1.334808] smsc911x: Could not allocate irq resource [WARN] [ 1.459350] db8500-thermal: probe of 801573c0.thermal failed with error -16 [WARN] [ 1.485534] cpufreq: cpufreq_online: CPU0: Running at unlisted freq: 998400 KHz [WARN] [ 1.493133] cpufreq: cpufreq_online: CPU0: Unlisted initial frequency changed to: 1000000 KHz [WARN] [ 1.878692] irq: type mismatch, failed to map hwirq-3 for /soc/gpio@8000e180! [WARN] [ 2.550018] st-accel-i2c: probe of 2-0018 failed with error -110 [WARN] [ 2.557067] irq: type mismatch, failed to map hwirq-6 for /soc/gpio@8000e180! [WARN] [ 2.585510] irq: type mismatch, failed to map hwirq-5 for /soc/gpio@8000e180! [WARN] [ 2.600036] st-magn-i2c: probe of 2-001e failed with error -22 [WARN] [ 2.635772] ux500-msp-i2s ux500-msp-i2s.1: Failed to get DMA channel capabilities, falling back to period counting: -6 [WARN] [ 2.656494] ux500-msp-i2s ux500-msp-i2s.3: Failed to get DMA channel capabilities, falling back to period counting: -6 [WARN] [ 2.939331] EXT4-fs (mmcblk3p4): warning: mounting fs with errors, running e2fsck is recommended [WARN] [cu: Got hangup signal Connected. cu: waitpid: No child processes Connected.

Disconnected.

[PYBOOT] [snowball 01:53]: got exception: ERROR: Timeout waiting for command: dmesg -l warn | awk '{ print "[WARN] " $0 }'. ~$off

[PYBOOT] [snowball 01:54]: Done. Board wandboard-arm-imx_v6_v7_defconfig failure log: -------------------------------------------------

[ 22.699553] mmcblk0: error -110 sending status command, retrying [ 22.707911] mmcblk0: error -110 sending status command, retrying [ 22.716267] mmcblk0: error -110 sending status command, aborting INIT: INIT: cannot execute "/sbin/getty"

INIT: INIT: cannot execute "/sbin/getty" INIT: cannot execute "/sbin/getty" INIT: Id "2" respawning too fast: [ 22.739237] mmcblk0: error -110 sending status command, retrying disabled for 5 minutes INIT: I[ 22.749718] mmcblk0: error -110 sending status command, retrying d "4" respawning too fast: disabl[ 22.760203] mmcblk0: error -110 sending status command, aborting ed for 5 minutes INIT: cannot execute "/sbin/getty" [ 22.772166] mmcblk0: error -110 sending status command, retrying [ 22.780530] mmcblk0: error -110 sending status command, retrying [ 22.788884] mmcblk0: error -110 sending status command, aborting INIT: cannot execute "/sbin/getty"[ 22.799865] mmcblk0: error -110 sending status command, retrying

INIT: Id "5" respawning too fast[ 22.808408] mmcblk0: error -110 sending status command, retrying : disabled for 5 minutes [ 22.819553] mmcblk0: error -110 sending status command, aborting INIT: cannot execute "/sbin/getty" I[ 22.830546] mmcblk0: error -110 sending status command, retrying NIT: Id "3" respawning too fast: [ 22.839370] mmcblk0: error -110 sending status command, retrying disabled for 5 minutes [ 22.848235] mmcblk0: error -110 sending status command, aborting INIT: INIT: cannot execute "/sbin/getty"cannot execute "/sbin/getty"

INIT: Id "6" respawning too fast: disabled for 5 minutes INIT: Id "S1" respawning too fast: disabled for 5 minutes INIT: no more processes left in this runlevel [ 93.994057] random: crng init done

[PYBOOT] [wandboard 02:59]: Timed out waiting for "<type 'str'>":

[PYBOOT] [wandboard 03:00]: got exception: timeout ~$off

[PYBOOT] [wandboard 03:01]: Done.