Full logs are available at http://arm-soc.lixom.net/bootlogs/next/next-20160503/
Failed boards:
arndale arm-multi_v7_nosmp_defconfig : FAILED 2:18.79 bbb arm-omap2plus_defconfig : FAILED 1:53.88 bbb arm-multi_v7_defconfig : FAILED 1:53.87 bbb arm-multi_v7_nosmp_defconfig : FAILED 2:17.41 beagleboard-x15 arm-omap2plus_defconfig : FAILED 1:45.59 beagleboard-x15 arm-multi_v7_defconfig : FAILED 1:44.44 beagleboard-x15 arm-multi_lpae_defconfig : FAILED 1:49.27 beagleboard-x15 arm-multi_v7_nosmp_defconfig : FAILED 1:58.09 chitra powerpc-pasemi_defconfig : BUILD FAILED colombus arm-multi_v7_nosmp_defconfig : FAILED 3:19.78 cosmic arm-imx_v6_v7_defconfig : FAILED 2:01.36 cosmic arm-multi_v7_defconfig : FAILED 2:02.71 cosmic arm-multi_v7_nosmp_defconfig : FAILED 2:09.44 dalmore arm-tegra_defconfig : FAILED 1:53.85 dalmore arm-multi_v7_defconfig : FAILED 1:57.23 dalmore arm-multi_v7_nosmp_defconfig : FAILED 1:57.26 jetsontk1 arm-tegra_defconfig : FAILED 0:29.21 minnowmax minnowmax_defconfig : NO BUILD odroidu3 arm-exynos_defconfig : FAILED 2:08.56 omap5uevm arm-omap2plus_defconfig : FAILED 2:05.87 omap5uevm arm-multi_v7_defconfig : FAILED 2:06.77 omap5uevm arm-multi_lpae_defconfig : FAILED 2:20.32 omap5uevm arm-multi_v7_nosmp_defconfig : FAILED 2:04.06 seaboard arm-tegra_defconfig : FAILED 1:54.95 seaboard arm-multi_v7_defconfig : FAILED 2:09.72 seaboard arm-multi_v7_nosmp_defconfig : FAILED 1:53.11 snow arm-multi_v7_nosmp_defconfig : FAILED 1:48.31 snowball arm-u8500_defconfig : FAILED 1:58.53 snowball arm-multi_v7_defconfig : FAILED 2:17.24 snowball arm-multi_v7_nosmp_defconfig : FAILED 2:02.78
Successful boards:
apc arm-vt8500_v6_v7_defconfig : passed 1:10.43 arndale arm-exynos_defconfig : passed 1:28.17 arndale arm-multi_v7_defconfig : passed 1:19.02 arndale arm-multi_lpae_defconfig : passed 1:41.16 capri arm-bcm_defconfig : passed 0:45.31 capri arm-multi_v7_defconfig : passed 0:57.18 capri arm-multi_v7_nosmp_defconfig : warnings 1:00.70 chitra powerpc-ppc64_defconfig : passed 2:08.03 colombus arm-sunxi_defconfig : passed 2:26.15 colombus arm-multi_v7_defconfig : passed 2:41.03 colombus arm-multi_lpae_defconfig : passed 2:37.68 cubie arm-sunxi_defconfig : passed 0:56.82 cubie arm-multi_v7_defconfig : passed 0:56.98 cubie arm-multi_v7_nosmp_defconfig : passed 1:06.09 cubie2 arm-sunxi_defconfig : passed 0:51.04 cubie2 arm-multi_v7_defconfig : passed 0:54.83 cubie2 arm-multi_lpae_defconfig : passed 0:58.00 cubie2 arm-multi_v7_nosmp_defconfig : warnings 0:56.42 cubox arm-multi_v7_defconfig : passed 1:25.30 cubox arm-mvebu_v7_defconfig : passed 1:04.85 cubox arm-multi_v7_nosmp_defconfig : passed 1:13.24 hummingboard arm-imx_v6_v7_defconfig : passed 1:35.47 hummingboard arm-multi_v7_defconfig : passed 1:27.43 hummingboard arm-multi_v7_nosmp_defconfig : warnings 1:04.60 jetsontk1 arm-multi_v7_defconfig : warnings 0:49.46 jetsontk1 arm-multi_lpae_defconfig : warnings 0:56.86 jetsontk1 arm-multi_v7_nosmp_defconfig : warnings 1:48.21 pandaes arm-omap2plus_defconfig : warnings 2:42.91 pandaes arm-multi_v7_defconfig : passed 1:59.92 pandaes arm-multi_v7_nosmp_defconfig : warnings 2:22.00 pi arm-exynos_defconfig : passed 2:14.33 pi arm-multi_v7_defconfig : passed 2:17.32 pi arm-multi_lpae_defconfig : passed 2:33.30 pi arm-multi_v7_nosmp_defconfig : warnings 2:06.74 pit arm-exynos_defconfig : passed 2:13.02 pit arm-multi_v7_defconfig : passed 2:13.07 pit arm-multi_lpae_defconfig : passed 2:26.39 pit arm-multi_v7_nosmp_defconfig : warnings 2:14.06 seattle arm64-defconfig : passed 2:34.25 snow arm-exynos_defconfig : passed 2:03.67 snow arm-multi_v7_defconfig : passed 2:16.47 snow arm-multi_lpae_defconfig : passed 1:54.44 trimslice arm-tegra_defconfig : warnings 1:36.46 trimslice arm-multi_v7_defconfig : warnings 1:55.01 trimslice arm-multi_v7_nosmp_defconfig : warnings 2:39.45 wandboard arm-imx_v6_v7_defconfig : passed 1:20.72 wandboard arm-multi_v7_defconfig : passed 1:12.05 wandboard arm-multi_v7_nosmp_defconfig : warnings 1:12.09
Offline boards:
beaver arm-tegra_defconfig : OFFLINE 2:11.06 beaver arm-multi_v7_defconfig : OFFLINE 2:19.36 beaver arm-multi_v7_nosmp_defconfig : OFFLINE 2:12.94 colibri-vf61 arm-imx_v6_v7_defconfig : OFFLINE 1:17.38 colibri-vf61 arm-multi_v7_defconfig : OFFLINE 1:20.11 colibri-vf61 arm-multi_v7_nosmp_defconfig : OFFLINE 1:23.50 dalmore arm-multi_lpae_defconfig : OFFLINE 2:26.65 parallella arm-multi_v7_defconfig : OFFLINE 2:35.47 parallella arm-multi_v7_nosmp_defconfig : OFFLINE 2:18.04 rk3288evb arm-multi_v7_defconfig : OFFLINE 1:00.91 rk3288evb arm-multi_lpae_defconfig : OFFLINE 0:51.55 rk3288evb arm-multi_v7_nosmp_defconfig : OFFLINE 0:42.16 sama5 arm-sama5_defconfig : OFFLINE 2:18.11 sama5d3-xplained arm-sama5_defconfig : OFFLINE 2:28.35 socfpga arm-socfpga_defconfig : OFFLINE 2:22.10 socfpga arm-multi_v7_defconfig : OFFLINE 2:25.83 socfpga arm-multi_v7_nosmp_defconfig : OFFLINE 2:13.93
Board legend is available at http://arm-soc.lixom.net/boards.html
Board arndale-arm-multi_v7_nosmp_defconfig failure log: -------------------------------------------------
input: gpio_keys as /devices/platform/gpio_keys/input/input0 hctosys: unable to open rtc device (rtc0) MAIN_DC: disabling hdmi-en: disabling ahci 122f0000.sata: couldn't get PHY in node sata: -517 MAIN_DC: disabling hdmi-en: disabling [c10b3480] *pgd=4100041e(bad) ahci Unable to handle kernel paging request at virtual address c10b3480 Modules linked in: pgd = c0204000 Internal error: Oops: 8000000d [#1] ARM CPU: 0 PID: 0 Comm: swapper Tainted: G W 4.6.0-rc6-next-20160503 #1 Hardware name: SAMSUNG EXYNOS (Flattened Device Tree) task: c1005f30 ti: c1000000 task.ti: c1000000 PC is at 0xc10b3480 LR is at cpu_pm_pmu_notify+0x70/0xb4 pc : [<c10b3480>] lr : [<c0992c6c>] psr: 600001d3 sp : c1001f88 ip : 00000000 fp : 000000a0 r10: 00000000 r9 : 00000000 r8 : 68bc852d r7 : 00000001 r6 : c10b3488 r5 : c10b3fc8 r4 : c100212c r3 : 00000006 r2 : 00000000 r1 : 00000006 r0 : 00000000 Flags: nZCv IRQs off FIQs off Mode SVC_32 ISA ARM Segment none Control: 10c53c7d Table: 40204059 DAC: 00000051 Process swapper (pid: 0, stack limit = 0xc1000218) Stack: (0xc1001f88 to 0xc1002000) 1f80: c10fdc9d c1002134 c10b3488 c10b3f28 c1001fac c0a9f400 1fa0: c1000000 c100212c c1001fb4 c0a9f604 00000000 c0358818 ffffffff c0f00c40 1fc0: ffffffff ffffffff 00000000 c0f00684 00000000 c0f8aa20 c10ff1d4 c10020b4 1fe0: c0f8aa1c c10070f4 40204059 410fc0f4 00000000 40208078 00000000 00000000 [<c0992c6c>] (cpu_pm_pmu_notify) from [<c0a9f400>] (schedule+0x44/0x9c) Code: c10b346c c10b35b8 c10b35b8 00000000 (c10b3488)
[PYBOOT] [arndale 02:16]: Timed out waiting for "<type 'str'>":
[PYBOOT] [arndale 02:17]: got exception: timeout ~$off
[PYBOOT] [arndale 02:18]: Done. Board bbb-arm-multi_v7_defconfig failure log: -------------------------------------------------
[ 1.566101] omap_hsmmc 48060000.mmc: Got CD GPIO [ 1.631775] Synopsys Designware Multimedia Card Interface Driver [ 1.639572] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.649497] ledtrig-cpu: registered to indicate activity on CPUs [ 1.656735] usbcore: registered new interface driver usbhid [ 1.662660] usbhid: USB HID core driver [ 1.674663] NET: Registered protocol family 10 [ 1.681177] sit: IPv6 over IPv4 tunneling driver [ 1.687318] NET: Registered protocol family 17 [ 1.692079] can: controller area network core (rev 20120528 abi 9) [ 1.698716] NET: Registered protocol family 29 [ 1.703428] can: raw protocol (rev 20120528) [ 1.707940] can: broadcast manager protocol (rev 20120528 t) [ 1.713924] can: netlink gateway (rev 20130117) max_hops=1 [ 1.720675] Key type dns_resolver registered [ 1.725543] omap_voltage_late_init: Voltage driver support not added [ 1.732506] ThumbEE CPU extension supported. [ 1.737050] Registering SWP/SWPB emulation handler [ 1.781776] tps65217 0-0024: TPS65217 ID 0xe version 1.2 [ 1.788201] at24 0-0050: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.795936] omap_i2c 44e0b000.i2c: bus 0 rev0.11 at 400 kHz [ 1.804557] at24 2-0054: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.812402] at24 2-0055: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.820163] at24 2-0056: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.827885] at24 2-0057: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.835229] omap_i2c 4819c000.i2c: bus 2 rev0.11 at 100 kHz [ 1.842294] hctosys: unable to open rtc device (rtc0) [ 1.855799] Waiting for root device /dev/mmcblk0p2... [ 1.861547] mmc1: new high speed MMC card at address 0001 [ 1.868350] mmcblk1: mmc1:0001 MMC02G 1.79 GiB [ 1.873626] mmcblk1boot0: mmc1:0001 MMC02G partition 1 1.00 MiB [ 1.880283] mmcblk1boot1: mmc1:0001 MMC02G partition 2 1.00 MiB [ 1.888908] mmcblk1: p1 p2
[PYBOOT] [bbb 01:50]: Timed out waiting for "<type 'str'>":
[PYBOOT] [bbb 01:51]: got exception: timeout ~$off
[PYBOOT] [bbb 01:53]: Done. Board bbb-arm-multi_v7_nosmp_defconfig failure log: -------------------------------------------------
sdhci: Secure Digital Host Controller Interface driver sdhci: Copyright(c) Pierre Ossman omap_hsmmc 48060000.mmc: Got CD GPIO Synopsys Designware Multimedia Card Interface Driver sdhci-pltfm: SDHCI platform and OF driver helper ledtrig-cpu: registered to indicate activity on CPUs usbcore: registered new interface driver usbhid usbhid: USB HID core driver NET: Registered protocol family 10 sit: IPv6 over IPv4 tunneling driver NET: Registered protocol family 17 can: controller area network core (rev 20120528 abi 9) NET: Registered protocol family 29 can: raw protocol (rev 20120528) can: broadcast manager protocol (rev 20120528 t) can: netlink gateway (rev 20130117) max_hops=1 Key type dns_resolver registered omap_voltage_late_init: Voltage driver support not added ThumbEE CPU extension supported. at24 0-0050: 32768 byte 24c256 EEPROM, writable, 1 bytes/write omap_i2c 44e0b000.i2c: bus 0 rev0.11 at 400 kHz at24 2-0054: 32768 byte 24c256 EEPROM, writable, 1 bytes/write at24 2-0055: 32768 byte 24c256 EEPROM, writable, 1 bytes/write at24 2-0056: 32768 byte 24c256 EEPROM, writable, 1 bytes/write at24 2-0057: 32768 byte 24c256 EEPROM, writable, 1 bytes/write omap_i2c 4819c000.i2c: bus 2 rev0.11 at 100 kHz hctosys: unable to open rtc device (rtc0) Waiting for root device /dev/mmcblk0p2... mmc1: new high speed MMC card at address 0001 mmcblk1: mmc1:0001 MMC02G 1.79 GiB mmcblk1boot0: mmc1:0001 MMC02G partition 1 1.00 MiB mmcblk1boot1: mmc1:0001 MMC02G partition 2 1.00 MiB mmcblk1: p1 p2
[PYBOOT] [bbb 02:14]: Timed out waiting for "<type 'str'>":
[PYBOOT] [bbb 02:15]: got exception: timeout ~$off
[PYBOOT] [bbb 02:16]: Done. Board bbb-arm-omap2plus_defconfig failure log: -------------------------------------------------
[ 2.042029] omap_hsmmc 481d8000.mmc: lookup for GPIO cd failed [ 2.048161] omap_hsmmc 481d8000.mmc: GPIO lookup for consumer wp [ 2.054500] omap_hsmmc 481d8000.mmc: using device tree for GPIO lookup [ 2.061388] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@481d8000[0]' [ 2.070999] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@481d8000[0]' [ 2.080512] omap_hsmmc 481d8000.mmc: using lookup tables for GPIO lookup [ 2.087540] omap_hsmmc 481d8000.mmc: lookup for GPIO wp failed [ 2.130685] ledtrig-cpu: registered to indicate activity on CPUs [ 2.139362] oprofile: using arm/armv7 [ 2.144346] Initializing XFRM netlink socket [ 2.149484] NET: Registered protocol family 10 [ 2.160092] sit: IPv6 over IPv4 tunneling driver [ 2.168900] NET: Registered protocol family 17 [ 2.173838] NET: Registered protocol family 15 [ 2.179060] Key type dns_resolver registered [ 2.183917] omap_voltage_late_init: Voltage driver support not added [ 2.190667] sr_dev_init: No voltage domain specified for smartreflex0. Cannot initialize [ 2.199149] sr_dev_init: No voltage domain specified for smartreflex1. Cannot initialize [ 2.208759] ThumbEE CPU extension supported. [ 2.213399] Registering SWP/SWPB emulation handler [ 2.218427] SmartReflex Class3 initialized [ 2.290239] tps65217 0-0024: TPS65217 ID 0xe version 1.2 [ 2.297514] omap_i2c 44e0b000.i2c: bus 0 rev0.11 at 400 kHz [ 2.306248] mmc1: new high speed MMC card at address 0001 [ 2.321247] omap_i2c 4819c000.i2c: bus 2 rev0.11 at 100 kHz [ 2.329537] mmcblk1: mmc1:0001 MMC02G 1.79 GiB [ 2.337365] hctosys: unable to open rtc device (rtc0) [ 2.342823] sr_init: No PMIC hook to init smartreflex [ 2.348528] sr_init: platform driver register failed for SR [ 2.386710] mmcblk1boot0: mmc1:0001 MMC02G partition 1 1.00 MiB [ 2.394994] mmcblk1boot1: mmc1:0001 MMC02G partition 2 1.00 MiB [ 2.409421] mmcblk1: p1 p2 [ 2.428116] Waiting for root device /dev/mmcblk0p2...
[PYBOOT] [bbb 01:51]: Timed out waiting for "<type 'str'>":
[PYBOOT] [bbb 01:52]: got exception: timeout ~$off
[PYBOOT] [bbb 01:53]: Done. Board beagleboard-x15-arm-multi_lpae_defconfig failure log: -------------------------------------------------
[ 2.161153] palmas-rtc 48070000.i2c:tps659038@58:tps659038_rtc: rtc core: registered 48070000.i2c:tps659 as rtc1 [ 2.175866] at24 0-0050: 4096 byte 24c32 EEPROM, writable, 1 bytes/write [ 2.182942] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 2.205453] rtc-ds1307 2-006f: SET TIME! [ 2.211204] rtc-ds1307 2-006f: rtc core: registered mcp7941x as rtc0 [ 2.217954] rtc-ds1307 2-006f: 64 bytes nvram [ 2.222571] omap_i2c 48060000.i2c: bus 2 rev0.12 at 400 kHz [ 2.230822] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller [ 2.236608] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1 [ 2.244852] xhci-hcd xhci-hcd.0.auto: hcc params 0x0220f04c hci version 0x100 quirks 0x00010010 [ 2.254016] xhci-hcd xhci-hcd.0.auto: irq 410, io mem 0x48890000 [ 2.260890] hub 1-0:1.0: USB hub found [ 2.264841] hub 1-0:1.0: 1 port detected [ 2.269249] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller [ 2.275024] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2 [ 2.283120] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. [ 2.292136] hub 2-0:1.0: USB hub found [ 2.296104] hub 2-0:1.0: 1 port detected [ 2.302196] omap_hsmmc 4809c000.mmc: Got CD GPIO [ 2.366451] rtc-ds1307 2-006f: setting system clock to 2001-01-01 00:00:00 UTC (978307200) [ 2.384573] aic_dvdd_fixed: disabling [ 2.389266] Waiting for root device /dev/mmcblk0p1... [ 2.422020] mmc1: new high speed MMC card at address 0001 [ 2.428046] mmcblk1: mmc1:0001 S10004 3.56 GiB [ 2.432961] mmcblk1boot0: mmc1:0001 S10004 partition 1 4.00 MiB [ 2.439332] mmcblk1boot1: mmc1:0001 S10004 partition 2 4.00 MiB [ 2.446264] mmcblk1: p1 [ 2.574945] usb 1-1: new high-speed USB device number 2 using xhci-hcd [ 2.731268] hub 1-1:1.0: USB hub found [ 2.735257] hub 1-1:1.0: 4 ports detected [ 2.814978] usb 2-1: new SuperSpeed USB device number 2 using xhci-hcd [ 2.843260] hub 2-1:1.0: USB hub found [ 2.847245] hub 2-1:1.0: 4 ports detected
[PYBOOT] [beagleboard-x15 01:46]: Timed out waiting for "<type 'str'>":
[PYBOOT] [beagleboard-x15 01:47]: got exception: timeout ~$off
[PYBOOT] [beagleboard-x15 01:48]: Done. Board beagleboard-x15-arm-multi_v7_defconfig failure log: -------------------------------------------------
[ 2.160886] palmas-rtc 48070000.i2c:tps659038@58:tps659038_rtc: rtc core: registered 48070000.i2c:tps659 as rtc1 [ 2.175619] at24 0-0050: 4096 byte 24c32 EEPROM, writable, 1 bytes/write [ 2.182697] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 2.205382] rtc-ds1307 2-006f: SET TIME! [ 2.211126] rtc-ds1307 2-006f: rtc core: registered mcp7941x as rtc0 [ 2.217881] rtc-ds1307 2-006f: 64 bytes nvram [ 2.222496] omap_i2c 48060000.i2c: bus 2 rev0.12 at 400 kHz [ 2.230727] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller [ 2.236520] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1 [ 2.244768] xhci-hcd xhci-hcd.0.auto: hcc params 0x0220f04c hci version 0x100 quirks 0x00010010 [ 2.253946] xhci-hcd xhci-hcd.0.auto: irq 410, io mem 0x48890000 [ 2.260819] hub 1-0:1.0: USB hub found [ 2.264776] hub 1-0:1.0: 1 port detected [ 2.269186] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller [ 2.274964] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2 [ 2.283071] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. [ 2.292092] hub 2-0:1.0: USB hub found [ 2.296062] hub 2-0:1.0: 1 port detected [ 2.302149] omap_hsmmc 4809c000.mmc: Got CD GPIO [ 2.366517] rtc-ds1307 2-006f: setting system clock to 2001-01-01 00:00:00 UTC (978307200) [ 2.384611] aic_dvdd_fixed: disabling [ 2.389307] Waiting for root device /dev/mmcblk0p1... [ 2.416950] mmc1: new high speed MMC card at address 0001 [ 2.422988] mmcblk1: mmc1:0001 S10004 3.56 GiB [ 2.427900] mmcblk1boot0: mmc1:0001 S10004 partition 1 4.00 MiB [ 2.434260] mmcblk1boot1: mmc1:0001 S10004 partition 2 4.00 MiB [ 2.441194] mmcblk1: p1 [ 2.574890] usb 1-1: new high-speed USB device number 2 using xhci-hcd [ 2.731218] hub 1-1:1.0: USB hub found [ 2.735206] hub 1-1:1.0: 4 ports detected [ 2.814923] usb 2-1: new SuperSpeed USB device number 2 using xhci-hcd [ 2.843210] hub 2-1:1.0: USB hub found [ 2.847199] hub 2-1:1.0: 4 ports detected
[PYBOOT] [beagleboard-x15 01:41]: Timed out waiting for "<type 'str'>":
[PYBOOT] [beagleboard-x15 01:42]: got exception: timeout ~$off
[PYBOOT] [beagleboard-x15 01:43]: Done. Board beagleboard-x15-arm-multi_v7_nosmp_defconfig failure log: -------------------------------------------------
palmas-rtc 48070000.i2c:tps659038@58:tps659038_rtc: rtc core: registered 48070000.i2c:tps659 as rtc1 at24 0-0050: 4096 byte 24c32 EEPROM, writable, 1 bytes/write omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz rtc-ds1307 2-006f: SET TIME! rtc-ds1307 2-006f: rtc core: registered mcp7941x as rtc0 rtc-ds1307 2-006f: 64 bytes nvram omap_i2c 48060000.i2c: bus 2 rev0.12 at 400 kHz xhci-hcd xhci-hcd.0.auto: xHCI Host Controller xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1 xhci-hcd xhci-hcd.0.auto: hcc params 0x0220f04c hci version 0x100 quirks 0x00010010 xhci-hcd xhci-hcd.0.auto: irq 410, io mem 0x48890000 hub 1-0:1.0: USB hub found hub 1-0:1.0: 1 port detected xhci-hcd xhci-hcd.0.auto: xHCI Host Controller xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2 usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. hub 2-0:1.0: USB hub found hub 2-0:1.0: 1 port detected omap_hsmmc 4809c000.mmc: Got CD GPIO rtc-ds1307 2-006f: setting system clock to 2001-01-01 00:00:00 UTC (978307200) aic_dvdd_fixed: disabling Waiting for root device /dev/mmcblk0p1... mmc1: new high speed MMC card at address 0001 mmcblk1: mmc1:0001 S10004 3.56 GiB mmcblk1boot0: mmc1:0001 S10004 partition 1 4.00 MiB mmcblk1boot1: mmc1:0001 S10004 partition 2 4.00 MiB mmcblk1: p1 usb 1-1: new high-speed USB device number 2 using xhci-hcd hub 1-1:1.0: USB hub found hub 1-1:1.0: 4 ports detected usb 2-1: new SuperSpeed USB device number 2 using xhci-hcd hub 2-1:1.0: USB hub found hub 2-1:1.0: 4 ports detected
[PYBOOT] [beagleboard-x15 01:55]: Timed out waiting for "<type 'str'>":
[PYBOOT] [beagleboard-x15 01:56]: got exception: timeout ~$off
[PYBOOT] [beagleboard-x15 01:57]: Done. Board beagleboard-x15-arm-omap2plus_defconfig failure log: -------------------------------------------------
[ 4.258476] omap_hsmmc 4809c000.mmc: GPIO lookup for consumer cd [ 4.264766] omap_hsmmc 4809c000.mmc: using device tree for GPIO lookup [ 4.271663] of_get_named_gpiod_flags: parsed 'cd-gpios' property of node '/ocp/mmc@4809c000[0]' - status (0) [ 4.282060] omap_hsmmc 4809c000.mmc: Got CD GPIO [ 4.286925] omap_hsmmc 4809c000.mmc: GPIO lookup for consumer wp [ 4.293221] omap_hsmmc 4809c000.mmc: using device tree for GPIO lookup [ 4.300087] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@4809c000[0]' [ 4.309685] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@4809c000[0]' [ 4.319176] omap_hsmmc 4809c000.mmc: using lookup tables for GPIO lookup [ 4.326220] omap_hsmmc 4809c000.mmc: lookup for GPIO wp failed [ 4.367408] omap_hsmmc 480b4000.mmc: GPIO lookup for consumer cd [ 4.373705] omap_hsmmc 480b4000.mmc: using device tree for GPIO lookup [ 4.380572] of_get_named_gpiod_flags: can't parse 'cd-gpios' property of node '/ocp/mmc@480b4000[0]' [ 4.390170] of_get_named_gpiod_flags: can't parse 'cd-gpio' property of node '/ocp/mmc@480b4000[0]' [ 4.399669] omap_hsmmc 480b4000.mmc: using lookup tables for GPIO lookup [ 4.406713] omap_hsmmc 480b4000.mmc: lookup for GPIO cd failed [ 4.412843] omap_hsmmc 480b4000.mmc: GPIO lookup for consumer wp [ 4.419160] omap_hsmmc 480b4000.mmc: using device tree for GPIO lookup [ 4.426001] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@480b4000[0]' [ 4.435583] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@480b4000[0]' [ 4.445083] omap_hsmmc 480b4000.mmc: using lookup tables for GPIO lookup [ 4.452130] omap_hsmmc 480b4000.mmc: lookup for GPIO wp failed [ 4.497701] hctosys: unable to open rtc device (rtc0) [ 4.503007] sr_init: No PMIC hook to init smartreflex [ 4.508573] sr_init: platform driver register failed for SR [ 4.554745] aic_dvdd_fixed: disabling [ 4.558977] ldousb: disabling [ 4.563310] mmc1: new high speed MMC card at address 0001 [ 4.569806] Waiting for root device /dev/mmcblk0p1... [ 4.575914] mmcblk1: mmc1:0001 S10004 3.56 GiB [ 4.581384] mmcblk1boot0: mmc1:0001 S10004 partition 1 4.00 MiB [ 4.588156] mmcblk1boot1: mmc1:0001 S10004 partition 2 4.00 MiB [ 4.596545] mmcblk1: p1
[PYBOOT] [beagleboard-x15 01:43]: Timed out waiting for "<type 'str'>":
[PYBOOT] [beagleboard-x15 01:44]: got exception: timeout ~$off
[PYBOOT] [beagleboard-x15 01:45]: Done. Board colombus-arm-multi_v7_nosmp_defconfig failure log: -------------------------------------------------
[....] Activating swap...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. EXT4-fs (mmcblk0p1): warning: mounting fs with errors, running e2fsck is recommended EXT4-fs (mmcblk0p1): re-mounted. Opts: (null) [....] Cleaning up temporary files... /tmp[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0c. [....] Activating lvm and md swap...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [....] Checking file systems...fsck from util-linux 2.20.1 [?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [....] Mounting local filesystems...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [....] Activating swapfile swap...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [....] Cleaning up temporary files...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0c. [....] Setting kernel variables ...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. random: dd urandom read with 58 bits of entropy available [....] Configuring network interfaces...Internet Systems Consortium DHCP Client 4.2.2 Copyright 2004-2011 Internet Systems Consortium. All rights reserved. For info, please visit https://www.isc.org/software/dhcp/
eth0: device MAC address 82:f0:a4:3e:94:eb RX IPC Checksum Offload disabled No MAC Management Counters available IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready Listening on LPF/eth0/82:f0:a4:3e:94:eb Sending on LPF/eth0/82:f0:a4:3e:94:eb Sending on Socket/fallback DHCPREQUEST on eth0 to 255.255.255.255 port 67 DHCPREQUEST on eth0 to 255.255.255.255 port 67 DHCPREQUEST on eth0 to 255.255.255.255 port 67 DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 7 DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 10 DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 9 DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 12 DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 10 DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 12
[PYBOOT] [colombus 03:17]: Timed out waiting for "<type 'str'>":
[PYBOOT] [colombus 03:18]: got exception: timeout ~$off
[PYBOOT] [colombus 03:19]: Done. Board cosmic-arm-imx_v6_v7_defconfig failure log: -------------------------------------------------
[ 14.424198] blk_update_request: I/O error, dev mmcblk0, sector 3633185 [ 18.498421] mmcblk0: error -110 transferring data, sector 3633186, nr 230, cmd response 0x900, card status 0x0 [ 18.508741] blk_update_request: I/O error, dev mmcblk0, sector 3633186 [ 22.582960] mmcblk0: error -110 transferring data, sector 3633187, nr 229, cmd response 0x900, card status 0x0 [ 22.593282] blk_update_request: I/O error, dev mmcblk0, sector 3633187 [ 26.667452] mmcblk0: error -110 transferring data, sector 3633188, nr 228, cmd response 0x900, card status 0x0 [ 26.677782] blk_update_request: I/O error, dev mmcblk0, sector 3633188 [ 30.751998] mmcblk0: error -110 transferring data, sector 3633189, nr 227, cmd response 0x900, card status 0x0 [ 30.762323] blk_update_request: I/O error, dev mmcblk0, sector 3633189 [ 34.836497] mmcblk0: error -110 transferring data, sector 3633190, nr 226, cmd response 0x900, card status 0x0 [ 34.846826] blk_update_request: I/O error, dev mmcblk0, sector 3633190 [ 38.921048] mmcblk0: error -110 transferring data, sector 3633191, nr 225, cmd response 0x900, card status 0x0 [ 38.931396] blk_update_request: I/O error, dev mmcblk0, sector 3633191 [ 43.005591] mmcblk0: error -110 transferring data, sector 3633192, nr 224, cmd response 0x900, card status 0x0 [ 43.015921] blk_update_request: I/O error, dev mmcblk0, sector 3633192 [ 47.090146] mmcblk0: error -110 transferring data, sector 3633193, nr 223, cmd response 0x900, card status 0x0 [ 47.100531] blk_update_request: I/O error, dev mmcblk0, sector 3633193 [ 51.174693] mmcblk0: error -110 transferring data, sector 3633194, nr 222, cmd response 0x900, card status 0x0 [ 51.185015] blk_update_request: I/O error, dev mmcblk0, sector 3633194 [ 55.259234] mmcblk0: error -110 transferring data, sector 3633195, nr 221, cmd response 0x900, card status 0x0 [ 55.269551] blk_update_request: I/O error, dev mmcblk0, sector 3633195 [ 59.343760] mmcblk0: error -110 transferring data, sector 3633196, nr 220, cmd response 0x900, card status 0x0 [ 59.354078] blk_update_request: I/O error, dev mmcblk0, sector 3633196 [ 63.428296] mmcblk0: error -110 transferring data, sector 3633197, nr 219, cmd response 0x900, card status 0x0 [ 63.438615] blk_update_request: I/O error, dev mmcblk0, sector 3633197 [ 67.512825] mmcblk0: error -110 transferring data, sector 3633198, nr 218, cmd response 0x900, card status 0x0 [ 67.523144] blk_update_request: I/O error, dev mmcblk0, sector 3633198 [ 71.597301] mmcblk0: error -110 transferring data, sector 3633199, nr 217, cmd response 0x900, card status 0x0 [ 71.607618] blk_update_request: I/O error, dev mmcblk0, sector 3633199 [ 75.681833] mmcblk0: error -110 transferring data, sector 3633200, nr 216, cmd response 0x900, card status 0x0 [ 75.692155] blk_update_request: I/O error, dev mmcblk0, sector 3633200 [ 79.766308] mmcblk0: error -110 transferring data, sector 3633201, nr 215, cmd response 0x900, card status 0x0 [ 79.776631] blk_update_request: I/O error, dev mmcblk0, sector 3633201
[PYBOOT] [cosmic 01:58]: Timed out waiting for "<type 'str'>":
[PYBOOT] [cosmic 01:59]: got exception: timeout ~$off
[PYBOOT] [cosmic 02:00]: Done. Board cosmic-arm-multi_v7_defconfig failure log: -------------------------------------------------
[ 14.056835] blk_update_request: I/O error, dev mmcblk0, sector 3633185 [ 18.130815] mmcblk0: error -110 transferring data, sector 3633186, nr 230, cmd response 0x900, card status 0x0 [ 18.140894] blk_update_request: I/O error, dev mmcblk0, sector 3633186 [ 22.214869] mmcblk0: error -110 transferring data, sector 3633187, nr 229, cmd response 0x900, card status 0x0 [ 22.224945] blk_update_request: I/O error, dev mmcblk0, sector 3633187 [ 26.298921] mmcblk0: error -110 transferring data, sector 3633188, nr 228, cmd response 0x900, card status 0x0 [ 26.308996] blk_update_request: I/O error, dev mmcblk0, sector 3633188 [ 30.382979] mmcblk0: error -110 transferring data, sector 3633189, nr 227, cmd response 0x900, card status 0x0 [ 30.393056] blk_update_request: I/O error, dev mmcblk0, sector 3633189 [ 34.467042] mmcblk0: error -110 transferring data, sector 3633190, nr 226, cmd response 0x900, card status 0x0 [ 34.477127] blk_update_request: I/O error, dev mmcblk0, sector 3633190 [ 38.551110] mmcblk0: error -110 transferring data, sector 3633191, nr 225, cmd response 0x900, card status 0x0 [ 38.561181] blk_update_request: I/O error, dev mmcblk0, sector 3633191 [ 42.635178] mmcblk0: error -110 transferring data, sector 3633192, nr 224, cmd response 0x900, card status 0x0 [ 42.645249] blk_update_request: I/O error, dev mmcblk0, sector 3633192 [ 46.719222] mmcblk0: error -110 transferring data, sector 3633193, nr 223, cmd response 0x900, card status 0x0 [ 46.729292] blk_update_request: I/O error, dev mmcblk0, sector 3633193 [ 50.803273] mmcblk0: error -110 transferring data, sector 3633194, nr 222, cmd response 0x900, card status 0x0 [ 50.813344] blk_update_request: I/O error, dev mmcblk0, sector 3633194 [ 54.887325] mmcblk0: error -110 transferring data, sector 3633195, nr 221, cmd response 0x900, card status 0x0 [ 54.897395] blk_update_request: I/O error, dev mmcblk0, sector 3633195 [ 58.971372] mmcblk0: error -110 transferring data, sector 3633196, nr 220, cmd response 0x900, card status 0x0 [ 58.981446] blk_update_request: I/O error, dev mmcblk0, sector 3633196 [ 63.055426] mmcblk0: error -110 transferring data, sector 3633197, nr 219, cmd response 0x900, card status 0x0 [ 63.065497] blk_update_request: I/O error, dev mmcblk0, sector 3633197 [ 67.139477] mmcblk0: error -110 transferring data, sector 3633198, nr 218, cmd response 0x900, card status 0x0 [ 67.149559] blk_update_request: I/O error, dev mmcblk0, sector 3633198 [ 71.223541] mmcblk0: error -110 transferring data, sector 3633199, nr 217, cmd response 0x900, card status 0x0 [ 71.233618] blk_update_request: I/O error, dev mmcblk0, sector 3633199 [ 75.307605] mmcblk0: error -110 transferring data, sector 3633200, nr 216, cmd response 0x900, card status 0x0 [ 75.317686] blk_update_request: I/O error, dev mmcblk0, sector 3633200 [ 79.391667] mmcblk0: error -110 transferring data, sector 3633201, nr 215, cmd response 0x900, card status 0x0 [ 79.401746] blk_update_request: I/O error, dev mmcblk0, sector 3633201
[PYBOOT] [cosmic 01:59]: Timed out waiting for "<type 'str'>":
[PYBOOT] [cosmic 02:00]: got exception: timeout ~$off
[PYBOOT] [cosmic 02:01]: Done. Board cosmic-arm-multi_v7_nosmp_defconfig failure log: -------------------------------------------------
blk_update_request: I/O error, dev mmcblk0, sector 3633185 mmcblk0: error -110 transferring data, sector 3633186, nr 230, cmd response 0x900, card status 0x0 blk_update_request: I/O error, dev mmcblk0, sector 3633186 mmcblk0: error -110 transferring data, sector 3633187, nr 229, cmd response 0x900, card status 0x0 blk_update_request: I/O error, dev mmcblk0, sector 3633187 mmcblk0: error -110 transferring data, sector 3633188, nr 228, cmd response 0x900, card status 0x0 blk_update_request: I/O error, dev mmcblk0, sector 3633188 mmcblk0: error -110 transferring data, sector 3633189, nr 227, cmd response 0x900, card status 0x0 blk_update_request: I/O error, dev mmcblk0, sector 3633189 mmcblk0: error -110 transferring data, sector 3633190, nr 226, cmd response 0x900, card status 0x0 blk_update_request: I/O error, dev mmcblk0, sector 3633190 mmcblk0: error -110 transferring data, sector 3633191, nr 225, cmd response 0x900, card status 0x0 blk_update_request: I/O error, dev mmcblk0, sector 3633191 mmcblk0: error -110 transferring data, sector 3633192, nr 224, cmd response 0x900, card status 0x0 blk_update_request: I/O error, dev mmcblk0, sector 3633192 mmcblk0: error -110 transferring data, sector 3633193, nr 223, cmd response 0x900, card status 0x0 blk_update_request: I/O error, dev mmcblk0, sector 3633193 mmcblk0: error -110 transferring data, sector 3633194, nr 222, cmd response 0x900, card status 0x0 blk_update_request: I/O error, dev mmcblk0, sector 3633194 mmcblk0: error -110 transferring data, sector 3633195, nr 221, cmd response 0x900, card status 0x0 blk_update_request: I/O error, dev mmcblk0, sector 3633195 mmcblk0: error -110 transferring data, sector 3633196, nr 220, cmd response 0x900, card status 0x0 blk_update_request: I/O error, dev mmcblk0, sector 3633196 mmcblk0: error -110 transferring data, sector 3633197, nr 219, cmd response 0x900, card status 0x0 blk_update_request: I/O error, dev mmcblk0, sector 3633197 mmcblk0: error -110 transferring data, sector 3633198, nr 218, cmd response 0x900, card status 0x0 blk_update_request: I/O error, dev mmcblk0, sector 3633198 mmcblk0: error -110 transferring data, sector 3633199, nr 217, cmd response 0x900, card status 0x0 blk_update_request: I/O error, dev mmcblk0, sector 3633199 mmcblk0: error -110 transferring data, sector 3633200, nr 216, cmd response 0x900, card status 0x0 blk_update_request: I/O error, dev mmcblk0, sector 3633200 mmcblk0: error -110 transferring data, sector 3633201, nr 215, cmd response 0x900, card status 0x0 blk_update_request: I/O error, dev mmcblk0, sector 3633201
[PYBOOT] [cosmic 02:06]: Timed out waiting for "<type 'str'>":
[PYBOOT] [cosmic 02:07]: got exception: timeout ~$off
[PYBOOT] [cosmic 02:09]: Done. Board dalmore-arm-multi_v7_defconfig failure log: -------------------------------------------------
[ 2.782727] can: netlink gateway (rev 20130117) max_hops=1 [ 2.789675] Key type dns_resolver registered [ 2.796110] ThumbEE CPU extension supported. [ 2.800500] Registering SWP/SWPB emulation handler [ 2.817525] usb1_vbus: supplied by vdd-sys-5v0 [ 2.827565] usb2_vbus: supplied by vdd-sys-5v0 [ 2.845830] VDD_5V0_HDMI_CON: supplied by vdd-sys-5v0 [ 2.869318] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 2.876076] [drm] No driver support for vblank timestamp query. [ 2.896418] mmc1: new high speed MMC card at address 0001 [ 2.903977] mmcblk1: mmc1:0001 SEM32G 29.1 GiB [ 2.909645] mmcblk1boot0: mmc1:0001 SEM32G partition 1 4.00 MiB [ 2.918199] mmcblk1boot1: mmc1:0001 SEM32G partition 2 4.00 MiB [ 2.926904] mmcblk1rpmb: mmc1:0001 SEM32G partition 3 4.00 MiB [ 2.936838] mmcblk1: p1 [ 3.056471] Console: switching to colour frame buffer device 240x75 [ 3.144053] drm drm: fb0: frame buffer device [ 3.160552] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 3.175754] tegra-ehci 7d008000.usb: EHCI Host Controller [ 3.181337] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 1 [ 3.190135] tegra-ehci 7d008000.usb: irq 339, io mem 0x7d008000 [ 3.205566] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.10 [ 3.215873] hub 1-0:1.0: USB hub found [ 3.219868] hub 1-0:1.0: 1 port detected [ 3.229861] input: gpio-keys as /devices/soc0/gpio-keys/input/input0 [ 3.241539] palmas-rtc 7000d000.i2c:tps65913@58:rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800) [ 3.296533] dvdd_ts: disabling [ 3.299633] usb1_vbus: disabling [ 3.302999] vdd_cam_1v8_reg: disabling [ 3.310353] Waiting for root device /dev/mmcblk0p1... [ 3.530568] usb 1-1: new high-speed USB device number 2 using tegra-ehci [ 4.503537] asix 1-1:1.0 eth0: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 48:f8:b3:2b:29:1f [ 62.288601] random: nonblocking pool is initialized
[PYBOOT] [dalmore 01:54]: Timed out waiting for "<type 'str'>":
[PYBOOT] [dalmore 01:55]: got exception: timeout ~$off
[PYBOOT] [dalmore 01:56]: Done. Board dalmore-arm-multi_v7_nosmp_defconfig failure log: -------------------------------------------------
can: raw protocol (rev 20120528) can: broadcast manager protocol (rev 20120528 t) can: netlink gateway (rev 20130117) max_hops=1 Key type dns_resolver registered ThumbEE CPU extension supported. usb1_vbus: supplied by vdd-sys-5v0 usb2_vbus: supplied by vdd-sys-5v0 VDD_5V0_HDMI_CON: supplied by vdd-sys-5v0 [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [drm] No driver support for vblank timestamp query. Console: switching to colour frame buffer device 240x75 drm drm: fb0: frame buffer device [drm] Initialized tegra 0.0.0 20120330 on minor 0 tegra-ehci 7d008000.usb: EHCI Host Controller tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 1 mmc1: new high speed MMC card at address 0001 tegra-ehci 7d008000.usb: irq 339, io mem 0x7d008000 mmcblk1: mmc1:0001 SEM32G 29.1 GiB mmcblk1boot0: mmc1:0001 SEM32G partition 1 4.00 MiB tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.10 hub 1-0:1.0: USB hub found mmcblk1boot1: mmc1:0001 SEM32G partition 2 4.00 MiB hub 1-0:1.0: 1 port detected mmcblk1rpmb: mmc1:0001 SEM32G partition 3 4.00 MiB input: gpio-keys as /devices/soc0/gpio-keys/input/input0 mmcblk1: p1 palmas-rtc 7000d000.i2c:tps65913@58:rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800) dvdd_ts: disabling usb1_vbus: disabling vdd_cam_1v8_reg: disabling Waiting for root device /dev/mmcblk0p1... usb 1-1: new high-speed USB device number 2 using tegra-ehci asix 1-1:1.0 eth0: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 48:f8:b3:2b:29:1f
[PYBOOT] [dalmore 01:54]: Timed out waiting for "<type 'str'>":
[PYBOOT] [dalmore 01:55]: got exception: timeout ~$off
[PYBOOT] [dalmore 01:56]: Done. Board dalmore-arm-tegra_defconfig failure log: -------------------------------------------------
[ 5.452242] Bluetooth: RFCOMM socket layer initialized [ 5.457466] Bluetooth: RFCOMM ver 1.11 [ 5.461308] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 5.466799] Bluetooth: BNEP socket layer initialized [ 5.471860] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 5.477857] Bluetooth: HIDP socket layer initialized [ 5.484196] Key type dns_resolver registered [ 5.493608] Registering SWP/SWPB emulation handler [ 5.510985] usb1_vbus: supplied by vdd-sys-5v0 [ 5.521163] usb2_vbus: supplied by vdd-sys-5v0 [ 5.534726] VDD_5V0_HDMI_CON: supplied by vdd-sys-5v0 [ 5.561217] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 5.568007] [drm] No driver support for vblank timestamp query. [ 5.745761] Console: switching to colour frame buffer device 240x75 [ 5.833416] drm drm: fb0: frame buffer device [ 5.861951] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 5.871133] tegra-ehci 7d008000.usb: EHCI Host Controller [ 5.877065] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 1 [ 5.886280] tegra-ehci 7d008000.usb: irq 339, io mem 0x7d008000 [ 5.911960] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.10 [ 5.925854] hub 1-0:1.0: USB hub found [ 5.929806] hub 1-0:1.0: 1 port detected [ 5.943575] input: gpio-keys as /devices/soc0/gpio-keys/input/input1 [ 5.958888] palmas-rtc 7000d000.i2c:tps65913@58:rtc: setting system clock to 2000-01-01 00:00:01 UTC (946684801) [ 6.046203] dvdd_ts: disabling [ 6.049337] usb1_vbus: disabling [ 6.052754] vdd_cam_1v8_reg: disabling [ 6.057326] ALSA device list: [ 6.060317] #0: NVIDIA Tegra Dalmore [ 6.066261] Waiting for root device /dev/mmcblk0p1... [ 6.251948] usb 1-1: new high-speed USB device number 2 using tegra-ehci [ 7.276392] asix 1-1:1.0 eth0: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 48:f8:b3:2b:29:1f [ 63.711921] random: nonblocking pool is initialized
[PYBOOT] [dalmore 01:50]: Timed out waiting for "<type 'str'>":
[PYBOOT] [dalmore 01:51]: got exception: timeout ~$off
[PYBOOT] [dalmore 01:53]: Done. Board jetsontk1-arm-tegra_defconfig failure log: -------------------------------------------------
[ 4.320786] [<c010bb94>] (__irq_svc) from [<c01080b4>] (arch_cpu_idle+0x38/0x3c) [ 4.328178] [<c01080b4>] (arch_cpu_idle) from [<c015a3a4>] (cpu_startup_entry+0x1bc/0x218) [ 4.336433] [<c015a3a4>] (cpu_startup_entry) from [<8010150c>] (0x8010150c) [ 4.343386] CPU1: stopping [ 4.346096] CPU: 1 PID: 0 Comm: swapper/1 Tainted: G D W 4.6.0-rc6-next-20160503 #1 [ 4.354693] Hardware name: NVIDIA Tegra SoC (Flattened Device Tree) [ 4.360967] [<c010fa6c>] (unwind_backtrace) from [<c010b028>] (show_stack+0x10/0x14) [ 4.368706] [<c010b028>] (show_stack) from [<c03482d0>] (dump_stack+0x88/0x9c) [ 4.375924] [<c03482d0>] (dump_stack) from [<c010e21c>] (handle_IPI+0x16c/0x180) [ 4.383311] [<c010e21c>] (handle_IPI) from [<c010146c>] (gic_handle_irq+0x84/0x88) [ 4.390870] [<c010146c>] (gic_handle_irq) from [<c010bb94>] (__irq_svc+0x54/0x90) [ 4.398338] Exception stack(0xee87ff88 to 0xee87ffd0) [ 4.403384] ff80: 00000001 00000000 00000000 c0118fe0 ee87e000 c0d0249c [ 4.411552] ffa0: 00000000 00000000 c0c565b8 c0d02500 c0d5bc98 c0d02508 60000013 ee87ffd8 [ 4.419714] ffc0: c01080b0 c01080b4 60000013 ffffffff [ 4.424765] [<c010bb94>] (__irq_svc) from [<c01080b4>] (arch_cpu_idle+0x38/0x3c) [ 4.432155] [<c01080b4>] (arch_cpu_idle) from [<c015a3a4>] (cpu_startup_entry+0x1bc/0x218) [ 4.440410] [<c015a3a4>] (cpu_startup_entry) from [<8010150c>] (0x8010150c) [ 4.447360] CPU3: stopping [ 4.450069] CPU: 3 PID: 0 Comm: swapper/3 Tainted: G D W 4.6.0-rc6-next-20160503 #1 [ 4.458665] Hardware name: NVIDIA Tegra SoC (Flattened Device Tree) [ 4.464937] [<c010fa6c>] (unwind_backtrace) from [<c010b028>] (show_stack+0x10/0x14) [ 4.472677] [<c010b028>] (show_stack) from [<c03482d0>] (dump_stack+0x88/0x9c) [ 4.479893] [<c03482d0>] (dump_stack) from [<c010e21c>] (handle_IPI+0x16c/0x180) [ 4.487279] [<c010e21c>] (handle_IPI) from [<c010146c>] (gic_handle_irq+0x84/0x88) [ 4.494838] [<c010146c>] (gic_handle_irq) from [<c010bb94>] (__irq_svc+0x54/0x90) [ 4.502306] Exception stack(0xee885f88 to 0xee885fd0) [ 4.507354] 5f80: 00000001 00000000 00000000 c0118fe0 ee884000 c0d0249c [ 4.515522] 5fa0: 00000000 00000000 c0c565b8 c0d02500 c0d5bc98 c0d02508 60000013 ee885fd8 [ 4.523686] 5fc0: c01080b0 c01080b4 60000013 ffffffff [ 4.528735] [<c010bb94>] (__irq_svc) from [<c01080b4>] (arch_cpu_idle+0x38/0x3c) [ 4.536124] [<c01080b4>] (arch_cpu_idle) from [<c015a3a4>] (cpu_startup_entry+0x1bc/0x218) [ 4.544379] [<c015a3a4>] (cpu_startup_entry) from [<8010150c>] (0x8010150c) [ 4.551337] ---[ end Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b [ 4.551337]
[PYBOOT] [jetsontk1 00:27]: got exception: panic ~$off
[PYBOOT] [jetsontk1 00:28]: Done. Board odroidu3-arm-exynos_defconfig failure log: -------------------------------------------------
[ 1.706058] sit: IPv6 over IPv4 tunneling driver [ 1.711320] NET: Registered protocol family 17 [ 1.714547] NET: Registered protocol family 15 [ 1.719034] Key type dns_resolver registered [ 1.723342] Registering SWP/SWPB emulation handler [ 1.731176] [drm] Exynos DRM: using 12c10000.mixer device for DMA mapping operations [ 1.735905] exynos-drm exynos-drm: bound 12c10000.mixer (ops mixer_component_ops) [ 1.743322] exynos-drm exynos-drm: bound 12d00000.hdmi (ops hdmi_component_ops) [ 1.750467] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 1.757049] [drm] No driver support for vblank timestamp query. [ 1.762967] [drm] Initialized exynos 1.0.0 20110530 on minor 0 [ 1.769301] s3c-rtc 10070000.rtc: rtc disabled, re-enabling [ 1.774354] s3c-rtc 10070000.rtc: warning: invalid RTC value so initializing it [ 1.781774] s3c-rtc 10070000.rtc: rtc core: registered s3c as rtc1 [ 1.788927] mmc_host mmc1: Bus speed (slot 0) = 44000000Hz (slot req 52000000Hz, actual 44000000HZ div = 0) [ 1.797742] mmc_host mmc1: Bus speed (slot 0) = 73333333Hz (slot req 52000000Hz, actual 36666666HZ div = 1) [ 1.807511] mmc1: new DDR MMC card at address 0001 [ 1.811737] max98090 1-0010: MAX98090 REVID=0x43 [ 1.814031] max98090 1-0010: use default 2.8v micbias [ 1.822773] mmcblk1: mmc1:0001 008G92 7.28 GiB [ 1.826435] mmcblk1boot0: mmc1:0001 008G92 partition 1 4.00 MiB [ 1.832624] mmcblk1boot1: mmc1:0001 008G92 partition 2 4.00 MiB [ 1.833673] asoc-simple-card sound: HiFi <-> 3830000.i2s mapping ok [ 1.837301] input: gpio_keys as /devices/platform/gpio_keys/input/input0 [ 1.851097] mmcblk1rpmb: mmc1:0001 008G92 partition 3 512 KiB [ 1.857733] mmcblk1: p1 p2 [ 1.870699] max77686-rtc max77686-rtc: setting system clock to 2000-01-01 01:00:20 UTC (946688420) [ 1.892400] VDD10_HDMI_1.0V: disabling [ 1.893133] vdd_g3d: disabling [ 1.894204] BUCK8_2.8V: disabling [ 1.898265] ALSA device list: [ 1.899795] #0: Odroid-U3 [ 1.903713] Waiting for root device /dev/mmcblk0p2...
[PYBOOT] [odroidu3 02:05]: Timed out waiting for "<type 'str'>":
[PYBOOT] [odroidu3 02:06]: got exception: timeout ~$off
[PYBOOT] [odroidu3 02:07]: Done. Board omap5uevm-arm-multi_lpae_defconfig failure log: -------------------------------------------------
[ 1.930709] mmc0: new high speed MMC card at address 0001 [ 1.941409] mmcblk0: mmc0:0001 SEM04G 3.69 GiB [ 1.946327] mmcblk0boot0: mmc0:0001 SEM04G partition 1 2.00 MiB [ 1.952677] mmcblk0boot1: mmc0:0001 SEM04G partition 2 2.00 MiB [ 1.962827] smps9: Bringing 0uV into 2100000-2100000uV [ 1.970948] ldo1: Bringing 0uV into 1800000-1800000uV [ 1.977506] ldo2: Bringing 0uV into 2800000-2800000uV [ 1.985549] ldo4: Bringing 0uV into 1800000-1800000uV [ 1.996650] ldo7: Bringing 0uV into 2000000-2000000uV [ 2.003908] smsc95xx v1.0.4 [ 2.007623] ldo9: bypassed regulator has no supply! [ 2.012743] ldo9: failed to get the current voltage(-517) [ 2.018414] palmas-pmic 48070000.i2c:palmas@48:palmas_pmic: failed to register 48070000.i2c:palmas@48:palmas_pmic regulator [ 2.033749] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 2.056779] omap_i2c 4807c000.i2c: bus 4 rev0.12 at 400 kHz [ 2.060572] smsc95xx 1-3:1.0 eth0: register 'smsc95xx' at usb-4a064c00.ehci-3, smsc95xx USB 2.0 Ethernet, 86:db:61:8a:08:9e [ 2.074852] omap-dwc3 4a020000.omap_dwc3: vbus init failed [ 2.104760] smps9: Bringing 0uV into 2100000-2100000uV [ 2.123564] ldo9: bypassed regulator has no supply! [ 2.128689] ldo9: failed to get the current voltage(-517) [ 2.134349] palmas-pmic 48070000.i2c:palmas@48:palmas_pmic: failed to register 48070000.i2c:palmas@48:palmas_pmic regulator [ 2.148784] palmas-rtc 48070000.i2c:palmas@48:rtc: setting system clock to 2000-01-01 00:02:35 UTC (946684955) [ 2.164490] pbias_mmc_omap5: disabling [ 2.168439] vmmcsdio_fixed: disabling [ 2.172988] Waiting for root device /dev/mmcblk1p2... [ 2.285996] usb 1-2: new high-speed USB device number 3 using ehci-omap [ 2.421862] hub 1-2:1.0: USB hub found [ 2.425866] hub 1-2:1.0: 3 ports detected [ 2.431732] omap-dwc3 4a020000.omap_dwc3: vbus init failed [ 2.459798] smps9: Bringing 0uV into 2100000-2100000uV [ 2.478628] ldo9: bypassed regulator has no supply! [ 2.483748] ldo9: failed to get the current voltage(-517) [ 2.489410] palmas-pmic 48070000.i2c:palmas@48:palmas_pmic: failed to register 48070000.i2c:palmas@48:palmas_pmic regulator
[PYBOOT] [omap5uevm 02:17]: Timed out waiting for "<type 'str'>":
[PYBOOT] [omap5uevm 02:18]: got exception: timeout ~$off
[PYBOOT] [omap5uevm 02:19]: Done. Board omap5uevm-arm-multi_v7_defconfig failure log: -------------------------------------------------
[ 1.930747] mmc0: new high speed MMC card at address 0001 [ 1.935806] mmcblk0: mmc0:0001 SEM04G 3.69 GiB [ 1.935982] mmcblk0boot0: mmc0:0001 SEM04G partition 1 2.00 MiB [ 1.936146] mmcblk0boot1: mmc0:0001 SEM04G partition 2 2.00 MiB [ 1.963064] smps9: Bringing 0uV into 2100000-2100000uV [ 1.971265] ldo1: Bringing 0uV into 1800000-1800000uV [ 1.977810] ldo2: Bringing 0uV into 2800000-2800000uV [ 1.985810] ldo4: Bringing 0uV into 1800000-1800000uV [ 1.996917] ldo7: Bringing 0uV into 2000000-2000000uV [ 2.003937] smsc95xx v1.0.4 [ 2.007668] ldo9: bypassed regulator has no supply! [ 2.012781] ldo9: failed to get the current voltage(-517) [ 2.018452] palmas-pmic 48070000.i2c:palmas@48:palmas_pmic: failed to register 48070000.i2c:palmas@48:palmas_pmic regulator [ 2.033739] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 2.056806] omap_i2c 4807c000.i2c: bus 4 rev0.12 at 400 kHz [ 2.060605] smsc95xx 1-3:1.0 eth0: register 'smsc95xx' at usb-4a064c00.ehci-3, smsc95xx USB 2.0 Ethernet, 6e:71:55:f4:d8:3f [ 2.074888] omap-dwc3 4a020000.omap_dwc3: vbus init failed [ 2.104761] smps9: Bringing 0uV into 2100000-2100000uV [ 2.123480] ldo9: bypassed regulator has no supply! [ 2.128594] ldo9: failed to get the current voltage(-517) [ 2.134261] palmas-pmic 48070000.i2c:palmas@48:palmas_pmic: failed to register 48070000.i2c:palmas@48:palmas_pmic regulator [ 2.148724] palmas-rtc 48070000.i2c:palmas@48:rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800) [ 2.164421] pbias_mmc_omap5: disabling [ 2.168368] vmmcsdio_fixed: disabling [ 2.172897] Waiting for root device /dev/mmcblk1p2... [ 2.291033] usb 1-2: new high-speed USB device number 3 using ehci-omap [ 2.426897] hub 1-2:1.0: USB hub found [ 2.430903] hub 1-2:1.0: 3 ports detected [ 2.436755] omap-dwc3 4a020000.omap_dwc3: vbus init failed [ 2.464748] smps9: Bringing 0uV into 2100000-2100000uV [ 2.483499] ldo9: bypassed regulator has no supply! [ 2.488620] ldo9: failed to get the current voltage(-517) [ 2.494293] palmas-pmic 48070000.i2c:palmas@48:palmas_pmic: failed to register 48070000.i2c:palmas@48:palmas_pmic regulator
[PYBOOT] [omap5uevm 02:02]: Timed out waiting for "<type 'str'>":
[PYBOOT] [omap5uevm 02:03]: got exception: timeout ~$off
[PYBOOT] [omap5uevm 02:04]: Done. Board omap5uevm-arm-multi_v7_nosmp_defconfig failure log: -------------------------------------------------
ldo1: Bringing 0uV into 1800000-1800000uV ldo2: Bringing 0uV into 2800000-2800000uV ldo4: Bringing 0uV into 1800000-1800000uV ldo7: Bringing 0uV into 2000000-2000000uV ldo9: bypassed regulator has no supply! ldo9: failed to get the current voltage(-517) palmas-pmic 48070000.i2c:palmas@48:palmas_pmic: failed to register 48070000.i2c:palmas@48:palmas_pmic regulator omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz smsc95xx v1.0.4 omap_i2c 4807c000.i2c: bus 4 rev0.12 at 400 kHz omap-dwc3 4a020000.omap_dwc3: vbus init failed smps9: Bringing 0uV into 2100000-2100000uV ldo9: bypassed regulator has no supply! ldo9: failed to get the current voltage(-517) palmas-pmic 48070000.i2c:palmas@48:palmas_pmic: failed to register 48070000.i2c:palmas@48:palmas_pmic regulator palmas-rtc 48070000.i2c:palmas@48:rtc: setting system clock to 2000-01-01 00:04:50 UTC (946685090) pbias_mmc_omap5: disabling vmmcsdio_fixed: disabling smsc95xx 1-3:1.0 eth0: register 'smsc95xx' at usb-4a064c00.ehci-3, smsc95xx USB 2.0 Ethernet, 82:7e:5b:ff:15:ea omap-dwc3 4a020000.omap_dwc3: vbus init failed smps9: Bringing 0uV into 2100000-2100000uV ldo9: bypassed regulator has no supply! ldo9: failed to get the current voltage(-517) palmas-pmic 48070000.i2c:palmas@48:palmas_pmic: failed to register 48070000.i2c:palmas@48:palmas_pmic regulator Waiting for root device /dev/mmcblk1p2... usb 1-2: new high-speed USB device number 3 using ehci-omap hub 1-2:1.0: USB hub found hub 1-2:1.0: 3 ports detected omap-dwc3 4a020000.omap_dwc3: vbus init failed smps9: Bringing 0uV into 2100000-2100000uV ldo9: bypassed regulator has no supply! ldo9: failed to get the current voltage(-517) palmas-pmic 48070000.i2c:palmas@48:palmas_pmic: failed to register 48070000.i2c:palmas@48:palmas_pmic regulator
[PYBOOT] [omap5uevm 02:01]: Timed out waiting for "<type 'str'>":
[PYBOOT] [omap5uevm 02:02]: got exception: timeout ~$off
[PYBOOT] [omap5uevm 02:03]: Done. Board omap5uevm-arm-omap2plus_defconfig failure log: -------------------------------------------------
[ 3.934967] ldo9: bypassed regulator has no supply! [ 3.940104] ldo9: failed to get the current voltage(-517) [ 3.945781] palmas-pmic 48070000.i2c:palmas@48:palmas_pmic: failed to register 48070000.i2c:palmas@48:palmas_pmic regulator [ 3.968777] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 3.976292] omap_i2c 4807c000.i2c: bus 4 rev0.12 at 400 kHz [ 3.982901] omap_hsmmc 4809c000.mmc: GPIO lookup for consumer cd [ 3.989218] omap_hsmmc 4809c000.mmc: using device tree for GPIO lookup [ 3.996066] of_get_named_gpiod_flags: can't parse 'cd-gpios' property of node '/ocp/mmc@4809c000[0]' [ 4.005661] of_get_named_gpiod_flags: can't parse 'cd-gpio' property of node '/ocp/mmc@4809c000[0]' [ 4.015168] omap_hsmmc 4809c000.mmc: using lookup tables for GPIO lookup [ 4.022228] omap_hsmmc 4809c000.mmc: lookup for GPIO cd failed [ 4.028363] omap_hsmmc 4809c000.mmc: GPIO lookup for consumer wp [ 4.034662] omap_hsmmc 4809c000.mmc: using device tree for GPIO lookup [ 4.041527] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@4809c000[0]' [ 4.051115] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@4809c000[0]' [ 4.060611] omap_hsmmc 4809c000.mmc: using lookup tables for GPIO lookup [ 4.067654] omap_hsmmc 4809c000.mmc: lookup for GPIO wp failed [ 4.108475] omap_hsmmc 480ad000.mmc: GPIO lookup for consumer wp [ 4.114776] omap_hsmmc 480ad000.mmc: using device tree for GPIO lookup [ 4.121650] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@480ad000[0]' [ 4.131249] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@480ad000[0]' [ 4.140746] omap_hsmmc 480ad000.mmc: using lookup tables for GPIO lookup [ 4.147786] omap_hsmmc 480ad000.mmc: lookup for GPIO wp failed [ 4.168138] smps9: Bringing 0uV into 2100000-2100000uV [ 4.196483] ldo9: bypassed regulator has no supply! [ 4.201626] ldo9: failed to get the current voltage(-517) [ 4.207296] palmas-pmic 48070000.i2c:palmas@48:palmas_pmic: failed to register 48070000.i2c:palmas@48:palmas_pmic regulator [ 4.227409] hctosys: unable to open rtc device (rtc0) [ 4.232729] sr_init: No PMIC hook to init smartreflex [ 4.238235] sr_init: platform driver register failed for SR [ 4.266271] pbias_mmc_omap5: disabling [ 4.270234] vmmcsdio_fixed: disabling [ 4.276378] Waiting for root device /dev/mmcblk1p2...
[PYBOOT] [omap5uevm 02:03]: Timed out waiting for "<type 'str'>":
[PYBOOT] [omap5uevm 02:04]: got exception: timeout ~$off
[PYBOOT] [omap5uevm 02:05]: Done. Board seaboard-arm-multi_v7_defconfig failure log: -------------------------------------------------
[ 1.877863] tegra-dc 54200000.dc: failed to probe RGB output: -517 [ 1.884926] utmi_phy_clk_enable: timeout waiting for phy to stabilize [ 1.884946] tegra-ehci c5000000.usb: EHCI Host Controller [ 1.884967] tegra-ehci c5000000.usb: new USB bus registered, assigned bus number 3 [ 1.885192] tegra-ehci c5000000.usb: irq 287, io mem 0xc5000000 [ 1.901448] tegra-ehci c5000000.usb: USB 2.0 started, EHCI 1.00 [ 1.902032] hub 3-0:1.0: USB hub found [ 1.902061] hub 3-0:1.0: 1 port detected [ 1.937692] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 1.944331] [drm] No driver support for vblank timestamp query. [ 1.990656] mmc2: switch to bus width 8 failed [ 1.990829] mmc0: queuing unknown CIS tuple 0x80 (50 bytes) [ 1.990938] mmc2: switch to bus width 4 failed [ 1.990953] mmc2: new high speed MMC card at address 0001 [ 1.991937] mmcblk2: mmc2:0001 MMC08G 7.46 GiB [ 1.992171] mmcblk2boot0: mmc2:0001 MMC08G partition 1 512 KiB [ 1.992390] mmcblk2boot1: mmc2:0001 MMC08G partition 2 512 KiB [ 1.993711] mmcblk2: p3 [ 1.999170] mmc0: queuing unknown CIS tuple 0x80 (7 bytes) [ 2.001986] mmc0: queuing unknown CIS tuple 0x80 (7 bytes) [ 2.009179] mmc0: queuing unknown CIS tuple 0x80 (19 bytes) [ 2.027955] Console: switching to colour frame buffer device 170x48 [ 2.028235] mmc0: queuing unknown CIS tuple 0x02 (1 bytes) [ 2.032315] mmc0: new SDIO card at address 0001 [ 2.116265] drm drm: fb0: frame buffer device [ 2.131459] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 2.138208] input: gpio-keys as /devices/soc0/gpio-keys/input/input2 [ 2.145267] tps6586x-rtc tps6586x-rtc: setting system clock to 2009-01-01 00:00:00 UTC (1230768000) [ 2.159563] vdd_1v5: disabling [ 2.162644] vdd_1v2: disabling [ 2.874754] asix 2-1:1.0 eth0: register 'asix' at usb-c5008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, c0:c1:c0:13:08:60 [ 2.886120] Waiting for root device /dev/mmcblk0p3... [ 57.973514] random: nonblocking pool is initialized
[PYBOOT] [seaboard 02:07]: Timed out waiting for "<type 'str'>":
[PYBOOT] [seaboard 02:08]: got exception: timeout ~$off
[PYBOOT] [seaboard 02:09]: Done. Board seaboard-arm-multi_v7_nosmp_defconfig failure log: -------------------------------------------------
VDDIO_HDMI: supplied by vdd_5v0 tegra-dc 54200000.dc: failed to probe RGB output: -517 utmi_phy_clk_enable: timeout waiting for phy to stabilize tegra-ehci c5000000.usb: EHCI Host Controller tegra-ehci c5000000.usb: new USB bus registered, assigned bus number 3 tegra-ehci c5000000.usb: irq 287, io mem 0xc5000000 mmc2: switch to bus width 8 failed mmc2: switch to bus width 4 failed mmc2: new high speed MMC card at address 0001 mmcblk2: mmc2:0001 MMC08G 7.46 GiB tegra-ehci c5000000.usb: USB 2.0 started, EHCI 1.00 hub 3-0:1.0: USB hub found mmcblk2boot0: mmc2:0001 MMC08G partition 1 512 KiB hub 3-0:1.0: 1 port detected mmcblk2boot1: mmc2:0001 MMC08G partition 2 512 KiB [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [drm] No driver support for vblank timestamp query. mmcblk2: p3 mmc0: queuing unknown CIS tuple 0x80 (50 bytes) mmc0: queuing unknown CIS tuple 0x80 (7 bytes) mmc0: queuing unknown CIS tuple 0x80 (7 bytes) mmc0: queuing unknown CIS tuple 0x80 (19 bytes) mmc0: queuing unknown CIS tuple 0x02 (1 bytes) mmc0: new SDIO card at address 0001 Console: switching to colour frame buffer device 170x48 drm drm: fb0: frame buffer device [drm] Initialized tegra 0.0.0 20120330 on minor 0 input: gpio-keys as /devices/soc0/gpio-keys/input/input2 tps6586x-rtc tps6586x-rtc: setting system clock to 2009-01-01 00:00:00 UTC (1230768000) vdd_1v5: disabling vdd_1v2: disabling asix 2-1:1.0 eth0: register 'asix' at usb-c5008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, c0:c1:c0:13:08:60 Waiting for root device /dev/mmcblk0p3...
[PYBOOT] [seaboard 01:50]: Timed out waiting for "<type 'str'>":
[PYBOOT] [seaboard 01:51]: got exception: timeout ~$off
[PYBOOT] [seaboard 01:52]: Done. Board seaboard-arm-tegra_defconfig failure log: -------------------------------------------------
[ 4.400354] can: raw protocol (rev 20120528) [ 4.404677] can: broadcast manager protocol (rev 20120528 t) [ 4.410380] can: netlink gateway (rev 20130117) max_hops=1 [ 4.445520] Bluetooth: RFCOMM socket layer initialized [ 4.450674] Bluetooth: RFCOMM ver 1.11 [ 4.454432] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 4.459782] Bluetooth: BNEP socket layer initialized [ 4.464738] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 4.470693] Bluetooth: HIDP socket layer initialized [ 4.476991] Key type dns_resolver registered [ 4.482753] Registering SWP/SWPB emulation handler [ 4.498434] VDDIO_HDMI: supplied by vdd_5v0 [ 4.505425] tegra-dc 54200000.dc: failed to probe RGB output: -517 [ 4.517348] utmi_phy_clk_enable: timeout waiting for phy to stabilize [ 4.523824] tegra-ehci c5000000.usb: EHCI Host Controller [ 4.529328] tegra-ehci c5000000.usb: new USB bus registered, assigned bus number 3 [ 4.537539] tegra-ehci c5000000.usb: irq 287, io mem 0xc5000000 [ 4.555421] tegra-ehci c5000000.usb: USB 2.0 started, EHCI 1.00 [ 4.565187] hub 3-0:1.0: USB hub found [ 4.569100] hub 3-0:1.0: 1 port detected [ 4.583614] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 4.590305] [drm] No driver support for vblank timestamp query. [ 4.724572] asix 2-1:1.0 eth0: register 'asix' at usb-c5008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, c0:c1:c0:13:08:60 [ 4.746763] Console: switching to colour frame buffer device 170x48 [ 4.786799] drm drm: fb0: frame buffer device [ 4.815315] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 4.822472] input: gpio-keys as /devices/soc0/gpio-keys/input/input4 [ 4.830100] tps6586x-rtc tps6586x-rtc: setting system clock to 2009-01-01 00:00:01 UTC (1230768001) [ 4.892969] vdd_1v5: disabling [ 4.896053] vdd_1v2: disabling [ 4.899198] ALSA device list: [ 4.902156] #0: NVIDIA Tegra Seaboard [ 4.906652] Waiting for root device /dev/mmcblk0p3...
[PYBOOT] [seaboard 01:51]: Timed out waiting for "<type 'str'>":
[PYBOOT] [seaboard 01:52]: got exception: timeout ~$off
[PYBOOT] [seaboard 01:53]: Done. Board snow-arm-multi_v7_nosmp_defconfig failure log: -------------------------------------------------
Debian GNU/Linux comes with ABSOLUTELY NO WARRANTY, to the extent permitted by applicable law. root@snow:~# cat /proc/cmdline cat /proc/cmdline console=ttySAC3,115200 earlyprintk debug root=/dev/mmcblk0p3 rootwait root@snow:~# uname -r uname Unable to handle kernel paging request at virtual address c10b3480 pgd = c0204000 [c10b3480] *pgd=4100041e(bad) Internal error: Oops: 8000000d [#1] ARM Modules linked in: CPU: 0 PID: 0 Comm: swapper Tainted: G W 4.6.0-rc6-next-20160503 #1 Hardware name: SAMSUNG EXYNOS (Flattened Device Tree) task: c1005f30 ti: c1000000 task.ti: c1000000 PC is at 0xc10b3480 LR is at cpu_pm_pmu_notify+0x70/0xb4 pc : [<c10b3480>] lr : [<c0992c6c>] psr: 600001d3 sp : c1001f88 ip : 00000000 fp : 000000a0 r10: 00000000 r9 : 00000001 r8 : 8bb6ae63 r7 : 00000001 r6 : c10b3488 r5 : c10b3fc8 r4 : c100212c r3 : 00000006 r2 : 00000000 r1 : 00000006 r0 : 00000000 Flags: nZCv IRQs off FIQs off Mode SVC_32 ISA ARM Segment none Control: 10c53c7d Table: 6d24c059 DAC: 00000051 Process swapper (pid: 0, stack limit = 0xc1000218) Stack: (0xc1001f88 to 0xc1002000) 1f80: c10fdc9d c1002134 c10b3488 c10b3f28 c1001fac c0a9f400 1fa0: c1000000 c100212c c1001fb4 c0a9f604 00000000 c0358818 ffffffff c0f00c40 1fc0: ffffffff ffffffff 00000000 c0f00684 00000000 c0f8aa20 c10ff1d4 c10020b4 1fe0: c0f8aa1c c10070f4 40204059 410fc0f4 00000000 40208078 00000000 00000000 [<c0992c6c>] (cpu_pm_pmu_notify) from [<c0a9f400>] (schedule+0x44/0x9c) Code: c10b346c c10b35b8 c10b35b8 00000000 (c10b3488) ---[ end trace cb88537fdc8fa202 ]--- Kernel panic - not syncing: Attempted to kill the idle task! ---[ end Kernel panic - not syncing: Attempted to kill the idle task!
[PYBOOT] [snow 01:46]: got exception: ERROR: Timeout waiting for command: uname -r. ~$off
[PYBOOT] [snow 01:47]: Done. Board snowball-arm-multi_v7_defconfig failure log: -------------------------------------------------
[ 2.000518] NET: Registered protocol family 29 [ 2.005004] can: raw protocol (rev 20120528) [ 2.009307] can: broadcast manager protocol (rev 20120528 t) [ 2.014984] can: netlink gateway (rev 20130117) max_hops=1 [ 2.021301] Key type dns_resolver registered [ 2.025939] ThumbEE CPU extension supported. [ 2.030242] Registering SWP/SWPB emulation handler [ 2.042541] input: gpio_keys as /devices/soc0/gpio_keys/input/input0 [ 2.049682] rtc-pl031 80154000.rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800) [ 2.059234] thermal cooling_device0: thermal-cpufreq-0 bind to 0: 0-succeed [ 2.066284] thermal cooling_device0: thermal-cpufreq-0 bind to 1: 0-succeed [ 2.073333] thermal cooling_device0: thermal-cpufreq-0 bind to 2: 0-succeed [ 2.080352] db8500-cpufreq-cooling soc:cpufreq-cooling: Cooling device registered: thermal-cpufreq-0 [ 2.097625] db8500-esram12: disabling [ 2.101440] db8500-esram34: disabling [ 2.105224] en-3v3-fixed-supply: disabling [ 2.110870] V-CSI/DSI: disabling [ 2.116210] mmci-reg: disabling [ 2.120117] uart-pl011 80007000.uart: DMA channel TX dma0chan20 [ 2.126129] uart-pl011 80007000.uart: DMA channel RX dma0chan21 [ 2.132751] Waiting for root device /dev/mmcblk0p4... [ 2.155090] mmc3: new high speed MMC card at address 0001 [ 2.161437] mmcblk3: mmc3:0001 3.53 GiB [ 2.165832] mmcblk3boot0: mmc3:0001 partition 1 2.00 MiB [ 2.171661] mmcblk3boot1: mmc3:0001 partition 2 2.00 MiB [ 2.177429] mmcblk3rpmb: mmc3:0001 partition 3 128 KiB [ 2.184326] mmcblk3: p1 p2 p3 p4 cu: Got hangup signal Connected. cu: waitpid: No child processes Connected.
Disconnected.
[PYBOOT] [snowball 02:14]: Timed out waiting for "<type 'str'>":
[PYBOOT] [snowball 02:15]: got exception: timeout ~$off
[PYBOOT] [snowball 02:16]: Done. Board snowball-arm-multi_v7_nosmp_defconfig failure log: -------------------------------------------------
ledtrig-cpu: registered to indicate activity on CPUs usbcore: registered new interface driver usbhid usbhid: USB HID core driver NET: Registered protocol family 10 sit: IPv6 over IPv4 tunneling driver NET: Registered protocol family 17 can: controller area network core (rev 20120528 abi 9) NET: Registered protocol family 29 can: raw protocol (rev 20120528) can: broadcast manager protocol (rev 20120528 t) can: netlink gateway (rev 20130117) max_hops=1 Key type dns_resolver registered ThumbEE CPU extension supported. input: gpio_keys as /devices/soc0/gpio_keys/input/input0 rtc-pl031 80154000.rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800) thermal cooling_device0: thermal-cpufreq-0 bind to 0: 0-succeed thermal cooling_device0: thermal-cpufreq-0 bind to 1: 0-succeed thermal cooling_device0: thermal-cpufreq-0 bind to 2: 0-succeed db8500-cpufreq-cooling soc:cpufreq-cooling: Cooling device registered: thermal-cpufreq-0 db8500-esram12: disabling db8500-esram34: disabling en-3v3-fixed-supply: disabling V-CSI/DSI: disabling mmci-reg: disabling uart-pl011 80007000.uart: DMA channel TX dma0chan20 uart-pl011 80007000.uart: DMA channel RX dma0chan21 Waiting for root device /dev/mmcblk0p4... mmc3: new high speed MMC card at address 0001 mmcblk3: mmc3:0001 3.53 GiB mmcblk3boot0: mmc3:0001 partition 1 2.00 MiB mmcblk3boot1: mmc3:0001 partition 2 2.00 MiB mmcblk3rpmb: mmc3:0001 partition 3 128 KiB mmcblk3: p1 p2 p3 p4
[PYBOOT] [snowball 01:59]: Timed out waiting for "<type 'str'>":
[PYBOOT] [snowball 02:00]: got exception: timeout ~$off
[PYBOOT] [snowball 02:01]: Done. Board snowball-arm-u8500_defconfig failure log: -------------------------------------------------
[ 2.548950] coresight-etm3x 801af000.ptm: PTM 1.0 initialized [ 2.565643] ux500-msp-i2s ux500-msp-i2s.1: Failed to get DMA channel capabilities, falling back to period counting: -6 [ 2.576568] snd-soc-mop500 snd-soc-mop500.0: ab8500-codec-dai.0 <-> ux500-msp-i2s.1 mapping ok [ 2.589538] ux500-msp-i2s ux500-msp-i2s.3: Failed to get DMA channel capabilities, falling back to period counting: -6 [ 2.600250] snd-soc-mop500 snd-soc-mop500.0: ab8500-codec-dai.1 <-> ux500-msp-i2s.3 mapping ok [ 2.623901] NET: Registered protocol family 10 [ 2.639434] sit: IPv6 over IPv4 tunneling driver [ 2.644836] NET: Registered protocol family 17 [ 2.649322] NET: Registered protocol family 35 [ 2.653930] NET: Registered protocol family 37 [ 2.658477] Registering SWP/SWPB emulation handler [ 2.675323] input: gpio_keys as /devices/soc0/gpio_keys/input/input1 [ 2.682495] ab8500-rtc ab8500-rtc.0: setting system clock to 2000-04-14 06:51:17 UTC (955695077) [ 2.691772] thermal cooling_device0: thermal-cpufreq-0 bind to 0: 0-succeed [ 2.698760] thermal cooling_device0: thermal-cpufreq-0 bind to 1: 0-succeed [ 2.705871] thermal cooling_device0: thermal-cpufreq-0 bind to 2: 0-succeed [ 2.712921] db8500-cpufreq-cooling soc:cpufreq-cooling: Cooling device registered: thermal-cpufreq-0 [ 2.727294] db8500-esram12: disabling [ 2.731262] db8500-esram34: disabling [ 2.734985] en-3v3-fixed-supply: disabling [ 2.739288] V-CSI/DSI: disabling [ 2.742614] mmci-reg: disabling [ 2.745910] ALSA device list: [ 2.748870] #0: MOP500-card [ 2.752227] uart-pl011 80007000.uart: DMA channel TX dma0chan24 [ 2.758178] uart-pl011 80007000.uart: DMA channel RX dma0chan25 [ 2.764495] Waiting for root device /dev/mmcblk0p4... cu: Got hangup signal Connected. cu: waitpid: No child processes Connected.
Disconnected.
[PYBOOT] [snowball 01:55]: Timed out waiting for "<type 'str'>":
[PYBOOT] [snowball 01:56]: got exception: timeout ~$off
[PYBOOT] [snowball 01:58]: Done.
kernel-build-reports@lists.linaro.org