arm-multi_v7_defconfig ---------------------- cubie PASS: 0 min 15.7 sec 4430panda PASS: 1 min 2.8 sec

arm-exynos_defconfig -------------------- arndale PASS: 0 min 32.5 sec

arm-omap2plus_defconfig ----------------------- 3530overo PASS: 0 min 24.8 sec 4460panda-es PASS: 1 min 35.9 sec 3730storm PASS: 0 min 24.6 sec 3730xm FAIL: 0 min 0.0 sec 3530beagle PASS: 1 min 1.6 sec 4430panda PASS: 1 min 8.2 sec am335xboneb PASS: 0 min 27.7 sec

======================================================================

arm-omap2plus_defconfig -----------------------

3730xm: FAIL: last 24 lines of boot log: ----------------------------------------

[ 2.734344] usb usb1: SerialNumber: ehci-omap.0 [ 2.740631] mmc0: new high speed SDHC card at address 1234 [ 2.749786] mmcblk0: mmc0:1234 SA04G 3.63 GiB [ 2.765014] mmcblk0: p1 p2 [ 2.770050] hub 1-0:1.0: USB hub found [ 2.774200] hub 1-0:1.0: 3 ports detected [ 2.791534] input: gpio-keys as /devices/platform/gpio-keys/input/input1 [ 2.802368] twl_rtc twl_rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800) [ 3.095367] usb 1-2: new high-speed USB device number 2 using ehci-omap [ 3.246551] usb 1-2: New USB device found, idVendor=0424, idProduct=9514 [ 3.253631] usb 1-2: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 3.265350] hub 1-2:1.0: USB hub found [ 3.269836] hub 1-2:1.0: 5 ports detected [ 3.555694] usb 1-2.1: new high-speed USB device number 3 using ehci-omap [ 3.686309] usb 1-2.1: New USB device found, idVendor=0424, idProduct=ec00 [ 3.693572] usb 1-2.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 3.706939] smsc95xx v1.0.4 [ 3.800964] smsc95xx 1-2.1:1.0 eth0: register 'smsc95xx' at usb-ehci-omap.0-2.1, smsc95xx USB 2.0 Ethernet, 86:ae:6e:dd:88:a9 [ 3.897888] smsc95xx 1-2.1:1.0 eth0: hardware isn't capable of remote wakeup [ 5.309600] smsc95xx 1-2.1:1.0 eth0: link up, 100Mbps, half-duplex, lpa 0x40A1 [ 5.345336] Sending DHCP requests .~$off # PYBOOT: Exception: ERROR: Timeout waiting for command: if test -n ${preboot}; then run preboot; fi. # PYBOOT: Time: 0.00 seconds. # PYBOOT: Result: FAIL