Full logs are available at http://arm-soc.lixom.net/bootlogs/mainline/v4.6-rc7-111-g02c9c0e/
Failed boards:
arndale multi_v7_nosmp_defconfig : NO BUILD bbb arm-multi_v7_defconfig : FAILED 2:08.88 bbb multi_v7_nosmp_defconfig : NO BUILD beagleboard-x15 arm-omap2plus_defconfig : FAILED 1:44.22 beagleboard-x15 arm-multi_v7_defconfig : FAILED 1:43.98 beagleboard-x15 arm-multi_lpae_defconfig : FAILED 1:46.53 beagleboard-x15 multi_v7_nosmp_defconfig : NO BUILD beaver multi_v7_nosmp_defconfig : NO BUILD capri multi_v7_nosmp_defconfig : NO BUILD chitra powerpc-pasemi_defconfig : BUILD FAILED colibri-vf61 multi_v7_nosmp_defconfig : NO BUILD colombus multi_v7_nosmp_defconfig : NO BUILD cosmic arm-imx_v6_v7_defconfig : FAILED 2:01.29 cosmic arm-multi_v7_defconfig : FAILED 2:09.38 cosmic multi_v7_nosmp_defconfig : NO BUILD cubie multi_v7_nosmp_defconfig : NO BUILD cubie2 multi_v7_nosmp_defconfig : NO BUILD cubox multi_v7_nosmp_defconfig : NO BUILD dalmore arm-tegra_defconfig : FAILED 1:49.20 dalmore arm-multi_v7_defconfig : FAILED 3:19.64 dalmore arm-multi_lpae_defconfig : FAILED 1:52.69 dalmore multi_v7_nosmp_defconfig : NO BUILD hummingboard multi_v7_nosmp_defconfig : NO BUILD jetsontk1 multi_v7_nosmp_defconfig : NO BUILD minnowmax minnowmax_defconfig : NO BUILD odroidu3 arm-exynos_defconfig : FAILED 1:47.98 omap5uevm arm-multi_v7_defconfig : FAILED 2:08.65 omap5uevm arm-multi_lpae_defconfig : FAILED 2:10.26 omap5uevm multi_v7_nosmp_defconfig : NO BUILD pandaes multi_v7_nosmp_defconfig : NO BUILD parallella multi_v7_nosmp_defconfig : NO BUILD pi multi_v7_nosmp_defconfig : NO BUILD pit multi_v7_nosmp_defconfig : NO BUILD rk3288evb multi_v7_nosmp_defconfig : NO BUILD seaboard arm-tegra_defconfig : FAILED 1:49.02 seaboard arm-multi_v7_defconfig : FAILED 1:51.99 seaboard multi_v7_nosmp_defconfig : NO BUILD snow multi_v7_nosmp_defconfig : NO BUILD snowball arm-u8500_defconfig : FAILED 1:57.73 snowball arm-multi_v7_defconfig : FAILED 2:08.17 snowball multi_v7_nosmp_defconfig : NO BUILD socfpga multi_v7_nosmp_defconfig : NO BUILD trimslice multi_v7_nosmp_defconfig : NO BUILD wandboard multi_v7_nosmp_defconfig : NO BUILD
Successful boards:
apc arm-vt8500_v6_v7_defconfig : passed 1:18.62 arndale arm-exynos_defconfig : passed 1:31.44 arndale arm-multi_v7_defconfig : passed 1:21.32 arndale arm-multi_lpae_defconfig : passed 1:33.35 capri arm-bcm_defconfig : passed 0:50.54 capri arm-multi_v7_defconfig : passed 0:54.89 chitra powerpc-ppc64_defconfig : passed 3:09.50 colombus arm-sunxi_defconfig : passed 2:34.61 colombus arm-multi_v7_defconfig : passed 2:36.87 colombus arm-multi_lpae_defconfig : passed 2:27.41 cubie arm-sunxi_defconfig : passed 0:53.32 cubie arm-multi_v7_defconfig : passed 0:49.42 cubie2 arm-sunxi_defconfig : passed 0:49.43 cubie2 arm-multi_v7_defconfig : passed 1:04.34 cubie2 arm-multi_lpae_defconfig : passed 0:55.30 cubox arm-multi_v7_defconfig : passed 1:08.86 cubox arm-mvebu_v7_defconfig : passed 1:15.60 hummingboard arm-imx_v6_v7_defconfig : passed 1:28.45 hummingboard arm-multi_v7_defconfig : passed 1:11.56 jetsontk1 arm-tegra_defconfig : passed 1:35.79 jetsontk1 arm-multi_v7_defconfig : passed 1:36.03 jetsontk1 arm-multi_lpae_defconfig : passed 1:37.89 omap5uevm arm-omap2plus_defconfig : passed 1:04.08 pandaes arm-omap2plus_defconfig : warnings 1:45.63 pandaes arm-multi_v7_defconfig : passed 1:47.43 pi arm-exynos_defconfig : passed 2:13.81 pi arm-multi_v7_defconfig : passed 2:21.45 pi arm-multi_lpae_defconfig : passed 2:11.78 pit arm-exynos_defconfig : passed 2:12.28 pit arm-multi_v7_defconfig : passed 2:17.36 pit arm-multi_lpae_defconfig : passed 2:10.18 seattle arm64-defconfig : warnings 2:26.97 snow arm-exynos_defconfig : passed 2:06.18 snow arm-multi_v7_defconfig : passed 1:58.62 snow arm-multi_lpae_defconfig : passed 1:58.54 trimslice arm-tegra_defconfig : passed 1:32.05 trimslice arm-multi_v7_defconfig : passed 1:36.18 wandboard arm-imx_v6_v7_defconfig : passed 1:15.36 wandboard arm-multi_v7_defconfig : passed 1:17.55
Offline boards:
bbb arm-omap2plus_defconfig : OFFLINE 1:30.82 beaver arm-tegra_defconfig : OFFLINE 2:13.57 beaver arm-multi_v7_defconfig : OFFLINE 2:18.24 colibri-vf61 arm-imx_v6_v7_defconfig : OFFLINE 2:13.67 colibri-vf61 arm-multi_v7_defconfig : OFFLINE 2:31.33 parallella arm-multi_v7_defconfig : OFFLINE 2:18.93 rk3288evb arm-multi_v7_defconfig : OFFLINE 0:46.08 rk3288evb arm-multi_lpae_defconfig : OFFLINE 0:42.32 sama5 arm-sama5_defconfig : OFFLINE 2:24.33 sama5d3-xplained arm-sama5_defconfig : OFFLINE 2:12.11 socfpga arm-socfpga_defconfig : OFFLINE 2:21.14 socfpga arm-multi_v7_defconfig : OFFLINE 2:14.23
Board legend is available at http://arm-soc.lixom.net/boards.html
Board bbb-arm-multi_v7_defconfig failure log: -------------------------------------------------
[ 1.626045] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.636320] ledtrig-cpu: registered to indicate activity on CPUs [ 1.643426] usbcore: registered new interface driver usbhid [ 1.649353] usbhid: USB HID core driver [ 1.661372] NET: Registered protocol family 10 [ 1.667957] sit: IPv6 over IPv4 tunneling driver [ 1.674105] NET: Registered protocol family 17 [ 1.678876] can: controller area network core (rev 20120528 abi 9) [ 1.685512] NET: Registered protocol family 29 [ 1.690231] can: raw protocol (rev 20120528) [ 1.694753] can: broadcast manager protocol (rev 20120528 t) [ 1.700749] can: netlink gateway (rev 20130117) max_hops=1 [ 1.707505] Key type dns_resolver registered [ 1.712402] omap_voltage_late_init: Voltage driver support not added [ 1.720663] ThumbEE CPU extension supported. [ 1.725286] Registering SWP/SWPB emulation handler [ 1.767476] tps65217 0-0024: TPS65217 ID 0xe version 1.2 [ 1.774008] at24 0-0050: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.781764] omap_i2c 44e0b000.i2c: bus 0 rev0.11 at 400 kHz [ 1.790435] at24 2-0054: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.798348] at24 2-0055: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.806170] at24 2-0056: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.813985] at24 2-0057: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.821324] omap_i2c 4819c000.i2c: bus 2 rev0.11 at 100 kHz [ 1.830012] cpufreq: cpufreq_online: CPU0: Running at unlisted freq: 550000 KHz [ 1.837936] cpufreq: cpufreq_online: CPU0: Unlisted initial frequency changed to: 600000 KHz [ 1.847649] mmc1: new high speed MMC card at address 0001 [ 1.854895] hctosys: unable to open rtc device (rtc0) [ 1.867875] mmcblk1: mmc1:0001 MMC02G 1.79 GiB [ 1.873895] mmcblk1boot0: mmc1:0001 MMC02G partition 1 1.00 MiB [ 1.880881] mmcblk1boot1: mmc1:0001 MMC02G partition 2 1.00 MiB [ 1.889713] mmcblk1: p1 p2 [ 1.895430] Waiting for root device /dev/mmcblk0p2...
[PYBOOT] [bbb 02:05]: Timed out waiting for "<type 'str'>":
[PYBOOT] [bbb 02:06]: got exception: timeout ~$off
[PYBOOT] [bbb 02:07]: Done. Board beagleboard-x15-arm-multi_lpae_defconfig failure log: -------------------------------------------------
[ 1.713125] at24 0-0050: 4096 byte 24c32 EEPROM, writable, 1 bytes/write [ 1.720210] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 1.745714] rtc-ds1307 2-006f: SET TIME! [ 1.751451] rtc-ds1307 2-006f: rtc core: registered mcp7941x as rtc0 [ 1.758202] rtc-ds1307 2-006f: 64 bytes nvram [ 1.762816] omap_i2c 48060000.i2c: bus 2 rev0.12 at 400 kHz [ 1.771004] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller [ 1.776787] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1 [ 1.785024] xhci-hcd xhci-hcd.0.auto: hcc params 0x0220f04c hci version 0x100 quirks 0x00010010 [ 1.794183] xhci-hcd xhci-hcd.0.auto: irq 400, io mem 0x48890000 [ 1.801071] hub 1-0:1.0: USB hub found [ 1.805030] hub 1-0:1.0: 1 port detected [ 1.809420] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller [ 1.815200] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2 [ 1.823308] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. [ 1.832323] hub 2-0:1.0: USB hub found [ 1.836288] hub 2-0:1.0: 1 port detected [ 1.842299] omap_hsmmc 4809c000.mmc: Got CD GPIO [ 1.876326] vdd_3v3: supplied by regen1 [ 1.915679] rtc-ds1307 2-006f: setting system clock to 2001-01-01 00:00:00 UTC (978307200) [ 1.933250] aic_dvdd_fixed: disabling [ 1.938070] Waiting for root device /dev/mmcblk0p1... [ 1.982256] mmc1: new high speed MMC card at address 0001 [ 1.988250] mmcblk1: mmc1:0001 S10004 3.56 GiB [ 1.993139] mmcblk1boot0: mmc1:0001 S10004 partition 1 4.00 MiB [ 1.999485] mmcblk1boot1: mmc1:0001 S10004 partition 2 4.00 MiB [ 2.006525] mmcblk1: p1 [ 2.115214] usb 1-1: new high-speed USB device number 2 using xhci-hcd [ 2.150277] usb 2-1: new SuperSpeed USB device number 2 using xhci-hcd [ 2.175415] hub 2-1:1.0: USB hub found [ 2.179394] hub 2-1:1.0: 4 ports detected [ 2.271436] hub 1-1:1.0: USB hub found [ 2.275426] hub 1-1:1.0: 4 ports detected
[PYBOOT] [beagleboard-x15 01:43]: Timed out waiting for "<type 'str'>":
[PYBOOT] [beagleboard-x15 01:44]: got exception: timeout ~$off
[PYBOOT] [beagleboard-x15 01:45]: Done. Board beagleboard-x15-arm-multi_v7_defconfig failure log: -------------------------------------------------
[ 1.717367] at24 0-0050: 4096 byte 24c32 EEPROM, writable, 1 bytes/write [ 1.724447] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 1.750705] rtc-ds1307 2-006f: SET TIME! [ 1.756447] rtc-ds1307 2-006f: rtc core: registered mcp7941x as rtc0 [ 1.763196] rtc-ds1307 2-006f: 64 bytes nvram [ 1.767807] omap_i2c 48060000.i2c: bus 2 rev0.12 at 400 kHz [ 1.776003] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller [ 1.781787] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1 [ 1.790033] xhci-hcd xhci-hcd.0.auto: hcc params 0x0220f04c hci version 0x100 quirks 0x00010010 [ 1.799198] xhci-hcd xhci-hcd.0.auto: irq 400, io mem 0x48890000 [ 1.806084] hub 1-0:1.0: USB hub found [ 1.810033] hub 1-0:1.0: 1 port detected [ 1.814431] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller [ 1.820205] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2 [ 1.828314] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. [ 1.837332] hub 2-0:1.0: USB hub found [ 1.841297] hub 2-0:1.0: 1 port detected [ 1.847316] omap_hsmmc 4809c000.mmc: Got CD GPIO [ 1.881340] vdd_3v3: supplied by regen1 [ 1.919417] rtc-ds1307 2-006f: setting system clock to 2001-01-01 00:00:00 UTC (978307200) [ 1.937327] aic_dvdd_fixed: disabling [ 1.942058] Waiting for root device /dev/mmcblk0p1... [ 1.969232] mmc1: new high speed MMC card at address 0001 [ 1.975208] mmcblk1: mmc1:0001 S10004 3.56 GiB [ 1.980072] mmcblk1boot0: mmc1:0001 S10004 partition 1 4.00 MiB [ 1.986409] mmcblk1boot1: mmc1:0001 S10004 partition 2 4.00 MiB [ 1.993275] mmcblk1: p1 [ 2.120204] usb 1-1: new high-speed USB device number 2 using xhci-hcd [ 2.155227] usb 2-1: new SuperSpeed USB device number 2 using xhci-hcd [ 2.180423] hub 2-1:1.0: USB hub found [ 2.184402] hub 2-1:1.0: 4 ports detected [ 2.276444] hub 1-1:1.0: USB hub found [ 2.280424] hub 1-1:1.0: 4 ports detected
[PYBOOT] [beagleboard-x15 01:41]: Timed out waiting for "<type 'str'>":
[PYBOOT] [beagleboard-x15 01:42]: got exception: timeout ~$off
[PYBOOT] [beagleboard-x15 01:43]: Done. Board beagleboard-x15-arm-omap2plus_defconfig failure log: -------------------------------------------------
[ 2.174277] omap_hsmmc 4809c000.mmc: using device tree for GPIO lookup [ 2.181148] of_get_named_gpiod_flags: parsed 'cd-gpios' property of node '/ocp/mmc@4809c000[0]' - status (0) [ 2.191537] omap_hsmmc 4809c000.mmc: Got CD GPIO [ 2.196397] omap_hsmmc 4809c000.mmc: GPIO lookup for consumer wp [ 2.202690] omap_hsmmc 4809c000.mmc: using device tree for GPIO lookup [ 2.209543] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@4809c000[0]' [ 2.219137] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@4809c000[0]' [ 2.228639] omap_hsmmc 4809c000.mmc: using lookup tables for GPIO lookup [ 2.235698] omap_hsmmc 4809c000.mmc: lookup for GPIO wp failed [ 2.283715] omap_hsmmc 480b4000.mmc: GPIO lookup for consumer cd [ 2.290018] omap_hsmmc 480b4000.mmc: using device tree for GPIO lookup [ 2.296891] of_get_named_gpiod_flags: can't parse 'cd-gpios' property of node '/ocp/mmc@480b4000[0]' [ 2.306477] of_get_named_gpiod_flags: can't parse 'cd-gpio' property of node '/ocp/mmc@480b4000[0]' [ 2.315982] omap_hsmmc 480b4000.mmc: using lookup tables for GPIO lookup [ 2.323023] omap_hsmmc 480b4000.mmc: lookup for GPIO cd failed [ 2.329138] omap_hsmmc 480b4000.mmc: GPIO lookup for consumer wp [ 2.335449] omap_hsmmc 480b4000.mmc: using device tree for GPIO lookup [ 2.342296] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@480b4000[0]' [ 2.351880] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@480b4000[0]' [ 2.361383] omap_hsmmc 480b4000.mmc: using lookup tables for GPIO lookup [ 2.368424] omap_hsmmc 480b4000.mmc: lookup for GPIO wp failed [ 2.375122] vdd_3v3: supplied by regen1 [ 2.413819] hctosys: unable to open rtc device (rtc0) [ 2.419129] sr_init: No PMIC hook to init smartreflex [ 2.424647] sr_init: platform driver register failed for SR [ 2.471966] aic_dvdd_fixed: disabling [ 2.476239] ldousb: disabling [ 2.483486] Waiting for root device /dev/mmcblk0p1... [ 2.535434] mmc1: new high speed MMC card at address 0001 [ 2.543208] mmcblk1: mmc1:0001 S10004 3.56 GiB [ 2.548491] mmcblk1boot0: mmc1:0001 S10004 partition 1 4.00 MiB [ 2.555269] mmcblk1boot1: mmc1:0001 S10004 partition 2 4.00 MiB [ 2.563751] mmcblk1: p1
[PYBOOT] [beagleboard-x15 01:41]: Timed out waiting for "<type 'str'>":
[PYBOOT] [beagleboard-x15 01:42]: got exception: timeout ~$off
[PYBOOT] [beagleboard-x15 01:43]: Done. Board cosmic-arm-imx_v6_v7_defconfig failure log: -------------------------------------------------
[ 14.483942] blk_update_request: I/O error, dev mmcblk0, sector 3633185 [ 18.558180] mmcblk0: error -110 transferring data, sector 3633186, nr 230, cmd response 0x900, card status 0x0 [ 18.568505] blk_update_request: I/O error, dev mmcblk0, sector 3633186 [ 22.642687] mmcblk0: error -110 transferring data, sector 3633187, nr 229, cmd response 0x900, card status 0x0 [ 22.653009] blk_update_request: I/O error, dev mmcblk0, sector 3633187 [ 26.727236] mmcblk0: error -110 transferring data, sector 3633188, nr 228, cmd response 0x900, card status 0x0 [ 26.737558] blk_update_request: I/O error, dev mmcblk0, sector 3633188 [ 30.811750] mmcblk0: error -110 transferring data, sector 3633189, nr 227, cmd response 0x900, card status 0x0 [ 30.822079] blk_update_request: I/O error, dev mmcblk0, sector 3633189 [ 34.896321] mmcblk0: error -110 transferring data, sector 3633190, nr 226, cmd response 0x900, card status 0x0 [ 34.906652] blk_update_request: I/O error, dev mmcblk0, sector 3633190 [ 38.980841] mmcblk0: error -110 transferring data, sector 3633191, nr 225, cmd response 0x900, card status 0x0 [ 38.991168] blk_update_request: I/O error, dev mmcblk0, sector 3633191 [ 43.065418] mmcblk0: error -110 transferring data, sector 3633192, nr 224, cmd response 0x900, card status 0x0 [ 43.075807] blk_update_request: I/O error, dev mmcblk0, sector 3633192 [ 47.149992] mmcblk0: error -110 transferring data, sector 3633193, nr 223, cmd response 0x900, card status 0x0 [ 47.160312] blk_update_request: I/O error, dev mmcblk0, sector 3633193 [ 51.234548] mmcblk0: error -110 transferring data, sector 3633194, nr 222, cmd response 0x900, card status 0x0 [ 51.244864] blk_update_request: I/O error, dev mmcblk0, sector 3633194 [ 55.319093] mmcblk0: error -110 transferring data, sector 3633195, nr 221, cmd response 0x900, card status 0x0 [ 55.329409] blk_update_request: I/O error, dev mmcblk0, sector 3633195 [ 59.403645] mmcblk0: error -110 transferring data, sector 3633196, nr 220, cmd response 0x900, card status 0x0 [ 59.413990] blk_update_request: I/O error, dev mmcblk0, sector 3633196 [ 63.488313] mmcblk0: error -110 transferring data, sector 3633197, nr 219, cmd response 0x900, card status 0x0 [ 63.498631] blk_update_request: I/O error, dev mmcblk0, sector 3633197 [ 67.572807] mmcblk0: error -110 transferring data, sector 3633198, nr 218, cmd response 0x900, card status 0x0 [ 67.583122] blk_update_request: I/O error, dev mmcblk0, sector 3633198 [ 71.657348] mmcblk0: error -110 transferring data, sector 3633199, nr 217, cmd response 0x900, card status 0x0 [ 71.667667] blk_update_request: I/O error, dev mmcblk0, sector 3633199 [ 75.741852] mmcblk0: error -110 transferring data, sector 3633200, nr 216, cmd response 0x900, card status 0x0 [ 75.752169] blk_update_request: I/O error, dev mmcblk0, sector 3633200 [ 79.826396] mmcblk0: error -110 transferring data, sector 3633201, nr 215, cmd response 0x900, card status 0x0 [ 79.836715] blk_update_request: I/O error, dev mmcblk0, sector 3633201
[PYBOOT] [cosmic 01:58]: Timed out waiting for "<type 'str'>":
[PYBOOT] [cosmic 01:59]: got exception: timeout ~$off
[PYBOOT] [cosmic 02:00]: Done. Board cosmic-arm-multi_v7_defconfig failure log: -------------------------------------------------
[ 14.079035] blk_update_request: I/O error, dev mmcblk0, sector 3633185 [ 18.153025] mmcblk0: error -110 transferring data, sector 3633186, nr 230, cmd response 0x900, card status 0x0 [ 18.163095] blk_update_request: I/O error, dev mmcblk0, sector 3633186 [ 22.237081] mmcblk0: error -110 transferring data, sector 3633187, nr 229, cmd response 0x900, card status 0x0 [ 22.247156] blk_update_request: I/O error, dev mmcblk0, sector 3633187 [ 26.321136] mmcblk0: error -110 transferring data, sector 3633188, nr 228, cmd response 0x900, card status 0x0 [ 26.331215] blk_update_request: I/O error, dev mmcblk0, sector 3633188 [ 30.405194] mmcblk0: error -110 transferring data, sector 3633189, nr 227, cmd response 0x900, card status 0x0 [ 30.415281] blk_update_request: I/O error, dev mmcblk0, sector 3633189 [ 34.489273] mmcblk0: error -110 transferring data, sector 3633190, nr 226, cmd response 0x900, card status 0x0 [ 34.499355] blk_update_request: I/O error, dev mmcblk0, sector 3633190 [ 38.573344] mmcblk0: error -110 transferring data, sector 3633191, nr 225, cmd response 0x900, card status 0x0 [ 38.583409] blk_update_request: I/O error, dev mmcblk0, sector 3633191 [ 42.657396] mmcblk0: error -110 transferring data, sector 3633192, nr 224, cmd response 0x900, card status 0x0 [ 42.667460] blk_update_request: I/O error, dev mmcblk0, sector 3633192 [ 46.741440] mmcblk0: error -110 transferring data, sector 3633193, nr 223, cmd response 0x900, card status 0x0 [ 46.751512] blk_update_request: I/O error, dev mmcblk0, sector 3633193 [ 50.825499] mmcblk0: error -110 transferring data, sector 3633194, nr 222, cmd response 0x900, card status 0x0 [ 50.835591] blk_update_request: I/O error, dev mmcblk0, sector 3633194 [ 54.909573] mmcblk0: error -110 transferring data, sector 3633195, nr 221, cmd response 0x900, card status 0x0 [ 54.919639] blk_update_request: I/O error, dev mmcblk0, sector 3633195 [ 58.993626] mmcblk0: error -110 transferring data, sector 3633196, nr 220, cmd response 0x900, card status 0x0 [ 59.003699] blk_update_request: I/O error, dev mmcblk0, sector 3633196 [ 63.077685] mmcblk0: error -110 transferring data, sector 3633197, nr 219, cmd response 0x900, card status 0x0 [ 63.087760] blk_update_request: I/O error, dev mmcblk0, sector 3633197 [ 67.161742] mmcblk0: error -110 transferring data, sector 3633198, nr 218, cmd response 0x900, card status 0x0 [ 67.171820] blk_update_request: I/O error, dev mmcblk0, sector 3633198 [ 71.245801] mmcblk0: error -110 transferring data, sector 3633199, nr 217, cmd response 0x900, card status 0x0 [ 71.255879] blk_update_request: I/O error, dev mmcblk0, sector 3633199 [ 75.329866] mmcblk0: error -110 transferring data, sector 3633200, nr 216, cmd response 0x900, card status 0x0 [ 75.339939] blk_update_request: I/O error, dev mmcblk0, sector 3633200 [ 79.413920] mmcblk0: error -110 transferring data, sector 3633201, nr 215, cmd response 0x900, card status 0x0 [ 79.423999] blk_update_request: I/O error, dev mmcblk0, sector 3633201
[PYBOOT] [cosmic 02:06]: Timed out waiting for "<type 'str'>":
[PYBOOT] [cosmic 02:07]: got exception: timeout ~$off
[PYBOOT] [cosmic 02:08]: Done. Board dalmore-arm-multi_lpae_defconfig failure log: -------------------------------------------------
[ 2.480343] Key type dns_resolver registered [ 2.486746] ThumbEE CPU extension supported. [ 2.491164] Registering SWP/SWPB emulation handler [ 2.541286] vdd-sys-5v0: supplied by vdd_ac_bat [ 2.546640] VDD_5V0_HDMI_CON: supplied by vdd-sys-5v0 [ 2.555116] vdd_hdmi_5v0: supplied by vdd-sys-5v0 [ 2.570956] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 2.577741] [drm] No driver support for vblank timestamp query. [ 2.589254] mmc1: new high speed MMC card at address 0001 [ 2.598237] mmcblk1: mmc1:0001 SEM32G 29.1 GiB [ 2.606231] mmcblk1boot0: mmc1:0001 SEM32G partition 1 4.00 MiB [ 2.614508] mmcblk1boot1: mmc1:0001 SEM32G partition 2 4.00 MiB [ 2.623053] mmcblk1rpmb: mmc1:0001 SEM32G partition 3 4.00 MiB [ 2.633907] mmcblk1: p1 [ 2.757155] Console: switching to colour frame buffer device 240x75 [ 2.844094] drm drm: fb0: frame buffer device [ 2.864980] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 2.875104] usb2_vbus: supplied by vdd-sys-5v0 [ 2.885851] tegra-ehci 7d008000.usb: EHCI Host Controller [ 2.891447] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 1 [ 2.900402] tegra-ehci 7d008000.usb: irq 339, io mem 0x7d008000 [ 2.915013] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.10 [ 2.925537] hub 1-0:1.0: USB hub found [ 2.929554] hub 1-0:1.0: 1 port detected [ 2.940573] input: gpio-keys as /devices/soc0/gpio-keys/input/input0 [ 2.954647] palmas-rtc 7000d000.i2c:tps65913@58:rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800) [ 3.016385] dvdd_ts: disabling [ 3.019486] usb1_vbus: disabling [ 3.022856] vdd_cam_1v8_reg: disabling [ 3.030466] Waiting for root device /dev/mmcblk0p1... [ 3.240019] usb 1-1: new high-speed USB device number 2 using tegra-ehci [ 4.202714] asix 1-1:1.0 eth0: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 48:f8:b3:2b:29:1f [ 59.944972] random: nonblocking pool is initialized
[PYBOOT] [dalmore 01:50]: Timed out waiting for "<type 'str'>":
[PYBOOT] [dalmore 01:51]: got exception: timeout ~$off
[PYBOOT] [dalmore 01:52]: Done. Board dalmore-arm-multi_v7_defconfig failure log: -------------------------------------------------
[ 2.481161] Key type dns_resolver registered [ 2.487551] ThumbEE CPU extension supported. [ 2.491984] Registering SWP/SWPB emulation handler [ 2.519577] vdd-sys-5v0: supplied by vdd_ac_bat [ 2.526666] VDD_5V0_HDMI_CON: supplied by vdd-sys-5v0 [ 2.537273] vdd_hdmi_5v0: supplied by vdd-sys-5v0 [ 2.551656] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 2.558444] [drm] No driver support for vblank timestamp query. [ 2.583425] mmc1: new high speed MMC card at address 0001 [ 2.591090] mmcblk1: mmc1:0001 SEM32G 29.1 GiB [ 2.598119] mmcblk1boot0: mmc1:0001 SEM32G partition 1 4.00 MiB [ 2.606679] mmcblk1boot1: mmc1:0001 SEM32G partition 2 4.00 MiB [ 2.615247] mmcblk1rpmb: mmc1:0001 SEM32G partition 3 4.00 MiB [ 2.626015] mmcblk1: p1 [ 2.737461] Console: switching to colour frame buffer device 240x75 [ 2.824996] drm drm: fb0: frame buffer device [ 2.843848] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 2.853942] usb2_vbus: supplied by vdd-sys-5v0 [ 2.865642] tegra-ehci 7d008000.usb: EHCI Host Controller [ 2.871230] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 1 [ 2.880048] tegra-ehci 7d008000.usb: irq 339, io mem 0x7d008000 [ 2.893862] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.10 [ 2.904130] hub 1-0:1.0: USB hub found [ 2.908134] hub 1-0:1.0: 1 port detected [ 2.918692] input: gpio-keys as /devices/soc0/gpio-keys/input/input0 [ 2.932992] palmas-rtc 7000d000.i2c:tps65913@58:rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800) [ 2.994860] dvdd_ts: disabling [ 2.997964] usb1_vbus: disabling [ 3.001332] vdd_cam_1v8_reg: disabling [ 3.008813] Waiting for root device /dev/mmcblk0p1... [ 3.223881] usb 1-1: new high-speed USB device number 2 using tegra-ehci [ 4.202457] asix 1-1:1.0 eth0: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 48:f8:b3:2b:29:1f [ 65.350608] random: nonblocking pool is initialized
[PYBOOT] [dalmore 03:16]: Timed out waiting for "<type 'str'>":
[PYBOOT] [dalmore 03:17]: got exception: timeout ~$off
[PYBOOT] [dalmore 03:18]: Done. Board dalmore-arm-tegra_defconfig failure log: -------------------------------------------------
[ 2.626729] Bluetooth: RFCOMM ver 1.11 [ 2.630709] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 2.636105] Bluetooth: BNEP socket layer initialized [ 2.641199] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 2.647199] Bluetooth: HIDP socket layer initialized [ 2.654101] Key type dns_resolver registered [ 2.663794] Registering SWP/SWPB emulation handler [ 2.690680] vdd-sys-5v0: supplied by vdd_ac_bat [ 2.696977] VDD_5V0_HDMI_CON: supplied by vdd-sys-5v0 [ 2.708005] vdd_hdmi_5v0: supplied by vdd-sys-5v0 [ 2.732620] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 2.739271] [drm] No driver support for vblank timestamp query. [ 2.916432] Console: switching to colour frame buffer device 240x75 [ 3.003673] drm drm: fb0: frame buffer device [ 3.030020] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 3.037237] usb2_vbus: supplied by vdd-sys-5v0 [ 3.046516] tegra-ehci 7d008000.usb: EHCI Host Controller [ 3.052315] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 1 [ 3.061605] tegra-ehci 7d008000.usb: irq 339, io mem 0x7d008000 [ 3.079948] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.10 [ 3.094036] hub 1-0:1.0: USB hub found [ 3.097994] hub 1-0:1.0: 1 port detected [ 3.112163] input: gpio-keys as /devices/soc0/gpio-keys/input/input1 [ 3.127575] palmas-rtc 7000d000.i2c:tps65913@58:rtc: setting system clock to 2000-01-01 00:00:01 UTC (946684801) [ 3.222442] dvdd_ts: disabling [ 3.225547] usb1_vbus: disabling [ 3.228810] vdd_cam_1v8_reg: disabling [ 3.233599] ALSA device list: [ 3.236594] #0: NVIDIA Tegra Dalmore [ 3.242419] Waiting for root device /dev/mmcblk0p1... [ 3.419933] usb 1-1: new high-speed USB device number 2 using tegra-ehci [ 4.454534] asix 1-1:1.0 eth0: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 48:f8:b3:2b:29:1f [ 47.541661] random: nonblocking pool is initialized
[PYBOOT] [dalmore 01:45]: Timed out waiting for "<type 'str'>":
[PYBOOT] [dalmore 01:46]: got exception: timeout ~$off
[PYBOOT] [dalmore 01:48]: Done. Board odroidu3-arm-exynos_defconfig failure log: -------------------------------------------------
[ 1.688706] usbcore: registered new interface driver usbhid [ 1.693948] usbhid: USB HID core driver [ 1.702637] NET: Registered protocol family 10 [ 1.703254] sit: IPv6 over IPv4 tunneling driver [ 1.706471] NET: Registered protocol family 17 [ 1.710505] NET: Registered protocol family 15 [ 1.714955] Key type dns_resolver registered [ 1.719284] Registering SWP/SWPB emulation handler [ 1.725112] s3c-rtc 10070000.rtc: rtc disabled, re-enabling [ 1.729692] s3c-rtc 10070000.rtc: rtc core: registered s3c as rtc1 [ 1.756230] mmc_host mmc1: Bus speed (slot 0) = 44000000Hz (slot req 52000000Hz, actual 44000000HZ div = 0) [ 1.758092] max98090 1-0010: MAX98090 REVID=0x43 [ 1.760371] max98090 1-0010: use default 2.8v micbias [ 1.770259] mmc_host mmc1: Bus speed (slot 0) = 73333333Hz (slot req 52000000Hz, actual 36666666HZ div = 1) [ 1.777920] usb 1-3: New USB device found, idVendor=0424, idProduct=3503 [ 1.777925] usb 1-3: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.778481] hub 1-3:1.0: USB hub found [ 1.778623] hub 1-3:1.0: 3 ports detected [ 1.782882] asoc-simple-card sound: HiFi <-> 3830000.i2s mapping ok [ 1.786115] input: gpio_keys as /devices/platform/gpio_keys/input/input0 [ 1.814396] mmc1: new DDR MMC card at address 0001 [ 1.819347] mmcblk1: mmc1:0001 008G92 7.28 GiB [ 1.823384] max77686-rtc max77686-rtc: setting system clock to 2000-01-01 01:00:19 UTC (946688419) [ 1.832623] mmcblk1boot0: mmc1:0001 008G92 partition 1 4.00 MiB [ 1.838482] mmcblk1boot1: mmc1:0001 008G92 partition 2 4.00 MiB [ 1.839123] VDD10_HDMI_1.0V: disabling [ 1.839774] vdd_g3d: disabling [ 1.840408] BUCK8_2.8V: disabling [ 1.841g61] ALSA device list: [ 1.841766] #0: Odroid-U3 [ 1.860150] mmcblk1rpmb: mmc1:0001 008G92 partition 3 512 KiB [ 1.866686] mmcblk1: p1 p2 [ 1.870710] Waiting for root device /dev/mmcblk0p2...
[PYBOOT] [odroidu3 01:45]: Timed out waiting for "<type 'str'>":
[PYBOOT] [odroidu3 01:46]: got exception: timeout ~$off
[PYBOOT] [odroidu3 01:47]: Done. Board omap5uevm-arm-multi_lpae_defconfig failure log: -------------------------------------------------
[ 1.760412] usbhid: USB HID core driver [ 1.768940] NET: Registered protocol family 10 [ 1.773881] usb 1-3: new high-speed USB device number 2 using ehci-omap [ 1.781020] sit: IPv6 over IPv4 tunneling driver [ 1.786286] NET: Registered protocol family 17 [ 1.790944] can: controller area network core (rev 20120528 abi 9) [ 1.797454] NET: Registered protocol family 29 [ 1.802114] can: raw protocol (rev 20120528) [ 1.806578] can: broadcast manager protocol (rev 20120528 t) [ 1.812511] can: netlink gateway (rev 20130117) max_hops=1 [ 1.818532] Key type dns_resolver registered [ 1.823086] omap_vc_init_channel: No PMIC info for vdd_core [ 1.828921] omap_vp_init: No PMIC info for vdd_core [ 1.834024] omap_vc_init_channel: No PMIC info for vdd_mm [ 1.836354] mmc0: new high speed MMC card at address 0001 [ 1.836678] mmcblk0: mmc0:0001 SEM04G 3.69 GiB [ 1.836818] mmcblk0boot0: mmc0:0001 SEM04G partition 1 2.00 MiB [ 1.836947] mmcblk0boot1: mmc0:0001 SEM04G partition 2 2.00 MiB [ 1.862431] omap_vp_init: No PMIC info for vdd_mm [ 1.867351] omap_vc_init_channel: No PMIC info for vdd_mpu [ 1.873085] omap_vp_init: No PMIC info for vdd_mpu [ 1.878643] Power Management for TI OMAP4+ devices. [ 1.883876] ThumbEE CPU extension supported. [ 1.888363] Registering SWP/SWPB emulation handler [ 1.895373] palmas 0-0048: Irq flag is 0x00000000 [ 1.914502] smsc95xx v1.0.4 [ 1.920441] palmas 0-0048: Muxing GPIO 2, PWM 0, LED 0 [ 1.931070] palmas-rtc 48070000.i2c:palmas@48:rtc: rtc core: registered 48070000.i2c:palmas as rtc0 [ 1.970310] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 1.980910] smsc95xx 1-3:1.0 eth0: register 'smsc95xx' at usb-4a064c00.ehci-3, smsc95xx USB 2.0 Ethernet, 7e:78:44:d9:90:82 [ 1.993482] omap_i2c 4807c000.i2c: bus 4 rev0.12 at 400 kHz [ 2.033420] cpufreq: cpufreq_online: CPU0: Running at unlisted freq: 1100000 KHz [ 2.041353] cpufreq: cpufreq_online: CPU0: Unlisted initial frequency changed to: 1500000 KHz
[PYBOOT] [omap5uevm 02:06]: Timed out waiting for "<type 'str'>":
[PYBOOT] [omap5uevm 02:07]: got exception: timeout ~$off
[PYBOOT] [omap5uevm 02:08]: Done. Board omap5uevm-arm-multi_v7_defconfig failure log: -------------------------------------------------
[ 2.208254] bd60: 00000000 c140e039 ee05bdac c0f041f0 0000079c 00000000 00000000 00000000 [ 2.216812] bd80: 00000000 ee64d400 00000018 ee025f48 00005bb7 c058d298 ee025f48 c0f66110 [ 2.225368] bda0: ee025f58 ee05bdec ee025f48 ee05dd50 00000000 c1444b80 024080c0 024000c0 [ 2.233934] bdc0: 00000008 ee025f48 00000001 c1442a50 80000000 c1444b84 024000c0 20000013 [ 2.242497] bde0: 00000000 c058d404 c1444b98 00005bb7 ee663960 c0f72064 ee663960 c046df9c [ 2.251064] be00: ee663960 c1302300 ed8023b8 ee05be60 00000000 c1302700 ed808bb0 ee05be60 [ 2.259633] be20: ed808bdc c0427bcc ed8023b8 ee05be60 00000000 00000000 c1140c94 c05961ac [ 2.268197] be40: ed808bb0 ffffff05 ffff0a00 c0ee0a5a 00000000 00000000 00000000 c0ee0a58 [ 2.276757] be60: ee05befc 00000000 c0ee0a5a 00000002 ee05be88 c05964fc ffffff05 ffff0a00 [ 2.285314] be80: 00000000 00000000 ffffff05 ffff0a00 00000000 ee05bef8 c1410000 c0ee0a58 [ 2.293885] bea0: c1140c94 024000c0 c05980cc 00000008 00000000 c0597fd4 00000000 ee05beb8 [ 2.302449] bec0: 00000118 ee05bef8 c144fcf4 c1410000 c1410000 c1203228 c1140c94 00000000 [ 2.311019] bee0: 00000118 c05980cc c113ee10 ee05bef8 c0301e20 c0ee0a58 c1140c94 ee05a000 [ 2.319582] bf00: 00000000 cccccccd 00000000 c0464e3c c0c0b400 ee132880 00000000 c133659c [ 2.328149] bf20: c101e854 c0c1ceac 00000118 c035b858 c0eca0f8 c101d274 00000000 00000007 [ 2.336718] bf40: 00000007 c0ee0748 c1336584 c1410000 c1410000 c1410000 c1410000 c1203228 [ 2.345289] bf60: c11a3838 c11a383c 00000118 c1100db0 00000007 00000007 00000000 c11005ac [ 2.353855] bf80: 00000000 00000000 c0b50b64 00000000 00000000 00000000 00000000 00000000 [ 2.362421] bfa0: 00000000 c0b50b6c 00000000 c0307d38 00000000 00000000 00000000 00000000 [ 2.370984] bfc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 [ 2.379551] bfe0: 00000000 00000000 00000000 00000000 00000013 00000000 4899c0cd e9d998e8 [ 2.388124] [<c03ae634>] (get_symbol_pos) from [<c03aed08>] (kallsyms_lookup+0x40/0xbc) [ 2.396504] [<c03aed08>] (kallsyms_lookup) from [<c03aedb4>] (__sprint_symbol+0x30/0xcc) [ 2.404982] [<c03aedb4>] (__sprint_symbol) from [<c0593d90>] (symbol_string+0x44/0x80) [ 2.413278] [<c0593d90>] (symbol_string) from [<c05961ac>] (pointer+0x3d0/0x544) [ 2.421023] [<c05961ac>] (pointer) from [<c05964fc>] (vsnprintf+0x1dc/0x458) [ 2.428411] [<c05964fc>] (vsnprintf) from [<c0597fd4>] (kvasprintf+0x30/0x9c) [ 2.435885] [<c0597fd4>] (kvasprintf) from [<c05980cc>] (kasprintf+0x1c/0x2c) [ 2.443364] [<c05980cc>] (kasprintf) from [<c0301e20>] (do_one_initcall+0x34/0x1d4) [ 2.451382] [<c0301e20>] (do_one_initcall) from [<c1100db0>] (kernel_init_freeable+0x158/0x1e8) [ 2.460490] [<c1100db0>] (kernel_init_freeable) from [<c0b50b6c>] (kernel_init+0x8/0x114) [ 2.469060] [<c0b50b6c>] (kernel_init) from [<c0307d38>] (ret_from_fork+0x14/0x3c) [ 2.476984] Code: e5935000 e1a04007 ea000005 e08c30a3 (e796e103)
[PYBOOT] [omap5uevm 02:05]: Timed out waiting for "<type 'str'>":
[PYBOOT] [omap5uevm 02:06]: got exception: timeout ~$off
[PYBOOT] [omap5uevm 02:07]: Done. Board seaboard-arm-multi_v7_defconfig failure log: -------------------------------------------------
[ 1.657159] vdd_ldo7,avdd_hdmi,vdd_fuse: supplied by vdd_sm2,vin_ldo* [ 1.667682] utmi_phy_clk_enable: timeout waiting for phy to stabilize [ 1.674158] tegra-ehci c5000000.usb: EHCI Host Controller [ 1.679576] tegra-ehci c5000000.usb: new USB bus registered, assigned bus number 3 [ 1.687992] tegra-ehci c5000000.usb: irq 287, io mem 0xc5000000 [ 1.698847] mmc2: switch to bus width 8 failed [ 1.703581] mmc2: switch to bus width 4 failed [ 1.708071] mmc2: new high speed MMC card at address 0001 [ 1.708700] tegra-ehci c5000000.usb: USB 2.0 started, EHCI 1.00 [ 1.720804] mmcblk2: mmc2:0001 MMC08G 7.46 GiB [ 1.722980] hub 3-0:1.0: USB hub found [ 1.723027] hub 3-0:1.0: 1 port detected [ 1.733453] mmcblk2boot0: mmc2:0001 MMC08G partition 1 512 KiB [ 1.741053] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 1.747689] [drm] No driver support for vblank timestamp query. [ 1.753963] mmcblk2boot1: mmc2:0001 MMC08G partition 2 512 KiB [ 1.761267] mmcblk2: p3 [ 1.795371] mmc0: queuing unknown CIS tuple 0x80 (50 bytes) [ 1.803334] mmc0: queuing unknown CIS tuple 0x80 (7 bytes) [ 1.806207] mmc0: queuing unknown CIS tuple 0x80 (7 bytes) [ 1.813536] mmc0: queuing unknown CIS tuple 0x80 (19 bytes) [ 1.833092] mmc0: queuing unknown CIS tuple 0x02 (1 bytes) [ 1.838678] mmc0: new SDIO card at address 0001 [ 1.862307] Console: switching to colour frame buffer device 170x48 [ 1.917546] drm drm: fb0: frame buffer device [ 1.933646] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 1.940458] input: gpio-keys as /devices/soc0/gpio-keys/input/input2 [ 1.947530] tps6586x-rtc tps6586x-rtc: setting system clock to 2009-01-01 00:00:00 UTC (1230768000) [ 1.961684] vdd_1v5: disabling [ 1.964766] vdd_1v2: disabling [ 2.588234] asix 2-1:1.0 eth0: register 'asix' at usb-c5008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, c0:c1:c0:13:08:60 [ 2.599668] Waiting for root device /dev/mmcblk0p3... [ 58.457336] random: nonblocking pool is initialized
[PYBOOT] [seaboard 01:49]: Timed out waiting for "<type 'str'>":
[PYBOOT] [seaboard 01:50]: got exception: timeout ~$off
[PYBOOT] [seaboard 01:51]: Done. Board seaboard-arm-tegra_defconfig failure log: -------------------------------------------------
[ 1.660388] Bluetooth: RFCOMM ver 1.11 [ 1.664278] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 1.669672] Bluetooth: BNEP socket layer initialized [ 1.674663] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 1.680622] Bluetooth: HIDP socket layer initialized [ 1.686216] Key type dns_resolver registered [ 1.691748] Registering SWP/SWPB emulation handler [ 1.707463] tegra-dc 54200000.dc: failed to probe RGB output: -517 [ 1.714264] VDDIO_HDMI: supplied by vdd_5v0 [ 1.718719] vdd_sys: supplied by vdd_5v0 [ 1.722797] vdd_sm2,vin_ldo*: supplied by vdd_sys [ 1.727761] vdd_ldo8,avdd_hdmi_pll: supplied by vdd_sm2,vin_ldo* [ 1.734361] vdd_ldo7,avdd_hdmi,vdd_fuse: supplied by vdd_sm2,vin_ldo* [ 1.744898] utmi_phy_clk_enable: timeout waiting for phy to stabilize [ 1.751359] tegra-ehci c5000000.usb: EHCI Host Controller [ 1.757403] tegra-ehci c5000000.usb: new USB bus registered, assigned bus number 3 [ 1.765394] tegra-ehci c5000000.usb: irq 287, io mem 0xc5000000 [ 1.781510] tegra-ehci c5000000.usb: USB 2.0 started, EHCI 1.00 [ 1.789910] hub 3-0:1.0: USB hub found [ 1.793738] hub 3-0:1.0: 1 port detected [ 1.805207] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 1.811854] [drm] No driver support for vblank timestamp query. [ 1.882117] Console: switching to colour frame buffer device 170x48 [ 1.902090] drm drm: fb0: frame buffer device [ 1.931512] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 1.938795] input: gpio-keys as /devices/soc0/gpio-keys/input/input4 [ 1.946506] tps6586x-rtc tps6586x-rtc: setting system clock to 2009-01-01 00:00:00 UTC (1230768000) [ 1.966531] vdd_1v5: disabling [ 1.969585] vdd_1v2: disabling [ 1.972795] ALSA device list: [ 1.975755] #0: NVIDIA Tegra Seaboard [ 2.342423] asix 2-1:1.0 eth0: register 'asix' at usb-c5008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, c0:c1:c0:13:08:60 [ 2.353695] Waiting for root device /dev/mmcblk0p3...
[PYBOOT] [seaboard 01:46]: Timed out waiting for "<type 'str'>":
[PYBOOT] [seaboard 01:47]: got exception: timeout ~$off
[PYBOOT] [seaboard 01:48]: Done. Board snowball-arm-multi_v7_defconfig failure log: -------------------------------------------------
[ 1.958160] ledtrig-cpu: registered to indicate activity on CPUs [ 1.965698] usbcore: registered new interface driver usbhid [ 1.971343] usbhid: USB HID core driver [ 1.995330] NET: Registered protocol family 10 [ 2.002990] sit: IPv6 over IPv4 tunneling driver [ 2.009948] NET: Registered protocol family 17 [ 2.014526] can: controller area network core (rev 20120528 abi 9) [ 2.020965] NET: Registered protocol family 29 [ 2.025543] can: raw protocol (rev 20120528) [ 2.029876] can: broadcast manager protocol (rev 20120528 t) [ 2.035644] can: netlink gateway (rev 20130117) max_hops=1 [ 2.042694] Key type dns_resolver registered [ 2.047668] ThumbEE CPU extension supported. [ 2.052062] Registering SWP/SWPB emulation handler [ 2.068511] input: gpio_keys as /devices/soc0/gpio_keys/input/input0 [ 2.076324] rtc-pl031 80154000.rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800) [ 2.086517] thermal cooling_device0: thermal-cpufreq-0 bind to 0: 0-succeed [ 2.093658] thermal cooling_device0: thermal-cpufreq-0 bind to 1: 0-succeed [ 2.100799] thermal cooling_device0: thermal-cpufreq-0 bind to 2: 0-succeed [ 2.107879] db8500-cpufreq-cooling soc:cpufreq-cooling: Cooling device registered: thermal-cpufreq-0 [ 2.131103] db8500-esram12: disabling [ 2.134979] db8500-esram34: disabling [ 2.142608] V-CSI/DSI: disabling [ 2.146026] mmci-reg: disabling [ 2.150482] uart-pl011 80007000.uart: DMA channel TX dma0chan20 [ 2.156585] uart-pl011 80007000.uart: DMA channel RX dma0chan21 [ 2.163848] Waiting for root device /dev/mmcblk0p4... [ 2.189025] mmc3: new high speed MMC card at address 0001 [ 2.196014] mmcblk3: mmc3:0001 3.53 GiB [ 2.200836] mmcblk3boot0: mmc3:0001 partition 1 2.00 MiB [ 2.207061] mmcblk3boot1: mmc3:0001 partition 2 2.00 MiB [ 2.213195] mmcblk3rpmb: mmc3:0001 partition 3 128 KiB [ 2.220977] mmcblk3: p1 p2 p3 p4
[PYBOOT] [snowball 02:05]: Timed out waiting for "<type 'str'>":
[PYBOOT] [snowball 02:06]: got exception: timeout ~$off
[PYBOOT] [snowball 02:07]: Done. Board snowball-arm-u8500_defconfig failure log: -------------------------------------------------
[ 2.672363] ux500-msp-i2s ux500-msp-i2s.1: Failed to get DMA channel capabilities, falling back to period counting: -6 [ 2.683105] snd-soc-mop500 snd-soc-mop500.0: ab8500-codec-dai.0 <-> ux500-msp-i2s.1 mapping ok [ 2.693023] ux500-msp-i2s ux500-msp-i2s.3: Failed to get DMA channel capabilities, falling back to period counting: -6 [ 2.703735] snd-soc-mop500 snd-soc-mop500.0: ab8500-codec-dai.1 <-> ux500-msp-i2s.3 mapping ok [ 2.727416] NET: Registered protocol family 10 [ 2.733489] sit: IPv6 over IPv4 tunneling driver [ 2.739654] NET: Registered protocol family 17 [ 2.744232] NET: Registered protocol family 35 [ 2.748809] NET: Registered protocol family 37 [ 2.753387] Registering SWP/SWPB emulation handler [ 2.769805] coresight-etm3x 801ae000.ptm: PTM 1.0 initialized [ 2.776489] coresight-etm3x 801af000.ptm: PTM 1.0 initialized [ 2.783874] input: gpio_keys as /devices/soc0/gpio_keys/input/input1 [ 2.791015] ab8500-rtc ab8500-rtc.0: setting system clock to 2000-04-23 17:39:03 UTC (956511543) [ 2.800231] thermal cooling_device0: thermal-cpufreq-0 bind to 0: 0-succeed [ 2.807220] thermal cooling_device0: thermal-cpufreq-0 bind to 1: 0-succeed [ 2.814239] thermal cooling_device0: thermal-cpufreq-0 bind to 2: 0-succeed [ 2.821228] db8500-cpufreq-cooling soc:cpufreq-cooling: Cooling device registered: thermal-cpufreq-0 [ 2.834655] db8500-esram12: disabling [ 2.838439] db8500-esram34: disabling [ 2.842376] V-CSI/DSI: disabling [ 2.845642] mmci-reg: disabling [ 2.848937] ALSA device list: [ 2.851928] #0: MOP500-card [ 2.855285] uart-pl011 80007000.uart: DMA channel TX dma0chan24 [ 2.861236] uart-pl011 80007000.uart: DMA channel RX dma0chan25 [ 2.867431] Waiting for root device /dev/mmcblk0p4... Connected. cu: Got hangup signal cu: waitpid: No child processes Connected.
Disconnected.
[PYBOOT] [snowball 01:54]: Timed out waiting for "<type 'str'>":
[PYBOOT] [snowball 01:55]: got exception: timeout ~$off
[PYBOOT] [snowball 01:56]: Done.
kernel-build-reports@lists.linaro.org
-
Olof's autobooter