Full logs are available at http://arm-soc.lixom.net/bootlogs/mainline/v4.6-rc6-146-g85f397a/
Failed boards:
arndale arm-multi_v7_nosmp_defconfig : FAILED 1:21.86 bbb arm-omap2plus_defconfig : FAILED 1:55.03 bbb arm-multi_v7_defconfig : FAILED 1:54.70 bbb arm-multi_v7_nosmp_defconfig : FAILED 2:12.88 beagleboard-x15 arm-omap2plus_defconfig : FAILED 1:46.69 beagleboard-x15 arm-multi_v7_defconfig : FAILED 1:44.24 beagleboard-x15 arm-multi_lpae_defconfig : FAILED 1:50.46 beagleboard-x15 arm-multi_v7_nosmp_defconfig : FAILED 2:04.02 chitra powerpc-pasemi_defconfig : BUILD FAILED colombus arm-multi_v7_nosmp_defconfig : FAILED 3:20.26 cosmic arm-imx_v6_v7_defconfig : FAILED 2:02.80 cosmic arm-multi_v7_defconfig : FAILED 2:10.84 cosmic arm-multi_v7_nosmp_defconfig : FAILED 2:05.21 dalmore arm-tegra_defconfig : FAILED 1:49.65 dalmore arm-multi_v7_defconfig : FAILED 1:57.86 dalmore arm-multi_lpae_defconfig : FAILED 1:58.88 dalmore arm-multi_v7_nosmp_defconfig : FAILED 1:50.99 minnowmax minnowmax_defconfig : NO BUILD odroidu3 arm-exynos_defconfig : FAILED 1:51.03 omap5uevm arm-multi_v7_defconfig : FAILED 2:07.43 omap5uevm arm-multi_lpae_defconfig : FAILED 0:51.41 omap5uevm arm-multi_v7_nosmp_defconfig : FAILED 0:57.74 seaboard arm-tegra_defconfig : FAILED 1:50.20 seaboard arm-multi_v7_defconfig : FAILED 2:06.02 seaboard arm-multi_v7_nosmp_defconfig : FAILED 1:51.78 snow arm-multi_v7_nosmp_defconfig : FAILED 3:13.53 snowball arm-u8500_defconfig : FAILED 1:57.94 snowball arm-multi_v7_nosmp_defconfig : FAILED 1:57.95 wandboard arm-imx_v6_v7_defconfig : FAILED 3:03.23
Successful boards:
apc arm-vt8500_v6_v7_defconfig : passed 1:12.73 arndale arm-exynos_defconfig : passed 1:33.90 arndale arm-multi_v7_defconfig : passed 1:20.03 arndale arm-multi_lpae_defconfig : passed 1:34.12 capri arm-bcm_defconfig : passed 0:45.99 capri arm-multi_v7_defconfig : passed 1:02.69 capri arm-multi_v7_nosmp_defconfig : warnings 1:04.81 chitra powerpc-ppc64_defconfig : passed 2:20.21 colibri-vf61 arm-imx_v6_v7_defconfig : passed 1:35.33 colibri-vf61 arm-multi_v7_defconfig : passed 1:35.25 colibri-vf61 arm-multi_v7_nosmp_defconfig : passed 1:29.28 colombus arm-sunxi_defconfig : passed 2:24.81 colombus arm-multi_v7_defconfig : passed 2:54.34 colombus arm-multi_lpae_defconfig : passed 2:31.69 cubie arm-sunxi_defconfig : passed 0:57.58 cubie arm-multi_v7_defconfig : passed 1:03.75 cubie arm-multi_v7_nosmp_defconfig : passed 1:11.55 cubie2 arm-sunxi_defconfig : passed 0:49.18 cubie2 arm-multi_v7_defconfig : passed 0:58.50 cubie2 arm-multi_lpae_defconfig : passed 0:57.98 cubie2 arm-multi_v7_nosmp_defconfig : warnings 1:10.84 cubox arm-multi_v7_defconfig : passed 1:05.48 cubox arm-mvebu_v7_defconfig : passed 1:26.62 cubox arm-multi_v7_nosmp_defconfig : passed 1:27.36 hummingboard arm-imx_v6_v7_defconfig : passed 1:28.00 hummingboard arm-multi_v7_defconfig : passed 1:23.77 hummingboard arm-multi_v7_nosmp_defconfig : warnings 1:13.48 jetsontk1 arm-tegra_defconfig : passed 1:33.10 jetsontk1 arm-multi_v7_defconfig : passed 1:36.62 jetsontk1 arm-multi_lpae_defconfig : passed 1:50.73 jetsontk1 arm-multi_v7_nosmp_defconfig : warnings 1:37.45 omap5uevm arm-omap2plus_defconfig : passed 1:08.81 pandaes arm-omap2plus_defconfig : warnings 1:36.96 pandaes arm-multi_v7_defconfig : passed 1:42.19 pandaes arm-multi_v7_nosmp_defconfig : warnings 2:04.36 pi arm-exynos_defconfig : passed 2:37.93 pi arm-multi_v7_defconfig : passed 2:13.75 pi arm-multi_lpae_defconfig : passed 3:34.25 pi arm-multi_v7_nosmp_defconfig : warnings 2:09.27 pit arm-exynos_defconfig : passed 2:13.17 pit arm-multi_v7_defconfig : passed 2:16.58 pit arm-multi_lpae_defconfig : passed 2:18.06 pit arm-multi_v7_nosmp_defconfig : warnings 2:11.70 seattle arm64-defconfig : warnings 2:28.46 snow arm-exynos_defconfig : passed 2:05.33 snow arm-multi_v7_defconfig : passed 2:26.00 snow arm-multi_lpae_defconfig : passed 1:58.42 trimslice arm-tegra_defconfig : passed 1:32.04 trimslice arm-multi_v7_defconfig : passed 1:43.34 trimslice arm-multi_v7_nosmp_defconfig : warnings 1:49.42 wandboard arm-multi_v7_defconfig : passed 1:18.05 wandboard arm-multi_v7_nosmp_defconfig : warnings 1:00.16
Offline boards:
beaver arm-tegra_defconfig : OFFLINE 2:13.01 beaver arm-multi_v7_defconfig : OFFLINE 2:27.27 beaver arm-multi_v7_nosmp_defconfig : OFFLINE 2:15.68 parallella arm-multi_v7_defconfig : OFFLINE 2:23.06 parallella arm-multi_v7_nosmp_defconfig : OFFLINE 2:16.16 rk3288evb arm-multi_v7_defconfig : OFFLINE 1:07.53 rk3288evb arm-multi_lpae_defconfig : OFFLINE 1:01.06 rk3288evb arm-multi_v7_nosmp_defconfig : OFFLINE 0:41.24 sama5 arm-sama5_defconfig : OFFLINE 2:18.65 sama5d3-xplained arm-sama5_defconfig : OFFLINE 2:36.60 snowball arm-multi_v7_defconfig : OFFLINE 3:48.52 socfpga arm-socfpga_defconfig : OFFLINE 2:44.38 socfpga arm-multi_v7_defconfig : OFFLINE 2:35.72 socfpga arm-multi_v7_nosmp_defconfig : OFFLINE 2:12.44
Board legend is available at http://arm-soc.lixom.net/boards.html
Board arndale-arm-multi_v7_nosmp_defconfig failure log: -------------------------------------------------
[ 1.999187] ThumbEE CPU extension supported. [ 2.004282] ahci 122f0000.sata: couldn't get PHY in node sata: -517 [ 2.013777] input: gpio_keys as /devices/platform/gpio_keys/input/input0 [ 2.019203] hctosys: unable to open rtc device (rtc0) [ 2.028041] MAIN_DC: disabling [ 2.029644] hdmi-en: disabling [ 2.033042] ahci 122f0000.sata: couldn't get PHY in node sata: -517 [ 2.040081] Unable to handle kernel paging request at virtual address c10b5928 [ 2.046106] pgd = c0204000 [ 2.048796] [c10b5928] *pgd=4100041e(bad) [ 2.052792] Internal error: Oops: 8000000d [#1] ARM [ 2.057650] Modules linked in: [ 2.060692] CPU: 0 PID: 0 Comm: swapper Tainted: G W 4.6.0-rc6-00146-g85f397a #1 [ 2.069194] Hardware name: SAMSUNG EXYNOS (Flattened Device Tree) [ 2.075271] task: c1006570 ti: c1000000 task.ti: c1000000 [ 2.080653] PC is at 0xc10b5928 [ 2.083784] LR is at cpu_pm_pmu_notify+0x70/0xb4 [ 2.088379] pc : [<c10b5928>] lr : [<c0984430>] psr: 600001d3 [ 2.088379] sp : c1001f88 ip : 00000000 fp : 00000000 [ 2.099834] r10: c10b6420 r9 : 00000000 r8 : 000000a0 [ 2.105043] r7 : c10b6470 r6 : c10b5930 r5 : 00000000 r4 : c100212c [ 2.111552] r3 : 00000006 r2 : 00000000 r1 : 00000006 r0 : 00000001 [ 2.118064] Flags: nZCv IRQs off FIQs off Mode SVC_32 ISA ARM Segment none [ 2.125354] Control: 10c53c7d Table: 40204059 DAC: 00000051 [ 2.131083] Process swapper (pid: 0, stack limit = 0xc1000218) [ 2.136899] Stack: (0xc1001f88 to 0xc1002000) [ 2.141242] 1f80: c10fef5d c1002134 c10b5930 c10b63d0 c1001fac c0a8ec50 [ 2.149400] 1fa0: c1000000 c100212c c1001fb4 c0a8ee54 00000000 c035852c ffffffff c0f00c3c [ 2.157559] 1fc0: ffffffff ffffffff 00000000 c0f00684 00000000 c0f88a20 c11011d4 c10020b4 [ 2.165719] 1fe0: c0f88a1c c100772c 40204059 410fc0f4 00000000 40208078 00000000 00000000 [ 2.173887] [<c0984430>] (cpu_pm_pmu_notify) from [<c0a8ec50>] (schedule+0x44/0x9c) [ 2.181519] Code: c10b5914 c10b5a60 c10b5a60 00000000 (c10b5930) [ 2.187592] ---[ end trace cb88537fdc8fa202 ]--- [ 2.192191] Kernel panic - not syncing: Attempted to kill the idle task! [ 2.198875] ---[ end Kernel panic - not syncing: Attempted to kill the idle task!
[PYBOOT] [arndale 01:20]: got exception: panic ~$off
[PYBOOT] [arndale 01:21]: Done. Board bbb-arm-multi_v7_defconfig failure log: -------------------------------------------------
[ 1.631240] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.641502] ledtrig-cpu: registered to indicate activity on CPUs [ 1.648583] usbcore: registered new interface driver usbhid [ 1.654511] usbhid: USB HID core driver [ 1.666477] NET: Registered protocol family 10 [ 1.673072] sit: IPv6 over IPv4 tunneling driver [ 1.679208] NET: Registered protocol family 17 [ 1.683978] can: controller area network core (rev 20120528 abi 9) [ 1.690620] NET: Registered protocol family 29 [ 1.695340] can: raw protocol (rev 20120528) [ 1.699858] can: broadcast manager protocol (rev 20120528 t) [ 1.705850] can: netlink gateway (rev 20130117) max_hops=1 [ 1.712596] Key type dns_resolver registered [ 1.717505] omap_voltage_late_init: Voltage driver support not added [ 1.725783] ThumbEE CPU extension supported. [ 1.730420] Registering SWP/SWPB emulation handler [ 1.772758] tps65217 0-0024: TPS65217 ID 0xe version 1.2 [ 1.779297] at24 0-0050: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.787066] omap_i2c 44e0b000.i2c: bus 0 rev0.11 at 400 kHz [ 1.795762] at24 2-0054: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.803681] at24 2-0055: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.811508] at24 2-0056: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.819324] at24 2-0057: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.826680] omap_i2c 4819c000.i2c: bus 2 rev0.11 at 100 kHz [ 1.835357] cpufreq: cpufreq_online: CPU0: Running at unlisted freq: 550000 KHz [ 1.843284] cpufreq: cpufreq_online: CPU0: Unlisted initial frequency changed to: 600000 KHz [ 1.853018] mmc1: new high speed MMC card at address 0001 [ 1.860239] hctosys: unable to open rtc device (rtc0) [ 1.873221] mmcblk1: mmc1:0001 MMC02G 1.79 GiB [ 1.879234] mmcblk1boot0: mmc1:0001 MMC02G partition 1 1.00 MiB [ 1.886233] mmcblk1boot1: mmc1:0001 MMC02G partition 2 1.00 MiB [ 1.895097] mmcblk1: p1 p2 [ 1.900788] Waiting for root device /dev/mmcblk0p2...
[PYBOOT] [bbb 01:52]: Timed out waiting for "<type 'str'>":
[PYBOOT] [bbb 01:53]: got exception: timeout ~$off
[PYBOOT] [bbb 01:54]: Done. Board bbb-arm-multi_v7_nosmp_defconfig failure log: -------------------------------------------------
[ 1.317418] sdhci: Secure Digital Host Controller Interface driver [ 1.323940] sdhci: Copyright(c) Pierre Ossman [ 1.329743] omap_hsmmc 48060000.mmc: Got CD GPIO [ 1.392818] Synopsys Designware Multimedia Card Interface Driver [ 1.400193] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.409371] ledtrig-cpu: registered to indicate activity on CPUs [ 1.416123] usbcore: registered new interface driver usbhid [ 1.422000] usbhid: USB HID core driver [ 1.431587] NET: Registered protocol family 10 [ 1.438072] sit: IPv6 over IPv4 tunneling driver [ 1.443936] NET: Registered protocol family 17 [ 1.448671] can: controller area network core (rev 20120528 abi 9) [ 1.455264] NET: Registered protocol family 29 [ 1.459959] can: raw protocol (rev 20120528) [ 1.464472] can: broadcast manager protocol (rev 20120528 t) [ 1.470446] can: netlink gateway (rev 20130117) max_hops=1 [ 1.476957] Key type dns_resolver registered [ 1.481829] omap_voltage_late_init: Voltage driver support not added [ 1.489634] ThumbEE CPU extension supported. [ 1.502215] at24 0-0050: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.509767] omap_i2c 44e0b000.i2c: bus 0 rev0.11 at 400 kHz [ 1.517813] at24 2-0054: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.525538] at24 2-0055: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.533222] at24 2-0056: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.540893] at24 2-0057: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.548174] omap_i2c 4819c000.i2c: bus 2 rev0.11 at 100 kHz [ 1.555845] hctosys: unable to open rtc device (rtc0) [ 1.566578] Waiting for root device /dev/mmcblk0p2... [ 1.602086] mmc1: new high speed MMC card at address 0001 [ 1.608554] mmcblk1: mmc1:0001 MMC02G 1.79 GiB [ 1.613620] mmcblk1boot0: mmc1:0001 MMC02G partition 1 1.00 MiB [ 1.620104] mmcblk1boot1: mmc1:0001 MMC02G partition 2 1.00 MiB [ 1.628542] mmcblk1: p1 p2
[PYBOOT] [bbb 02:10]: Timed out waiting for "<type 'str'>":
[PYBOOT] [bbb 02:11]: got exception: timeout ~$off
[PYBOOT] [bbb 02:12]: Done. Board bbb-arm-omap2plus_defconfig failure log: -------------------------------------------------
[ 2.059293] omap_hsmmc 481d8000.mmc: lookup for GPIO cd failed [ 2.065429] omap_hsmmc 481d8000.mmc: GPIO lookup for consumer wp [ 2.071774] omap_hsmmc 481d8000.mmc: using device tree for GPIO lookup [ 2.078668] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@481d8000[0]' [ 2.088291] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@481d8000[0]' [ 2.097817] omap_hsmmc 481d8000.mmc: using lookup tables for GPIO lookup [ 2.104855] omap_hsmmc 481d8000.mmc: lookup for GPIO wp failed [ 2.148043] ledtrig-cpu: registered to indicate activity on CPUs [ 2.156774] oprofile: using arm/armv7 [ 2.161869] Initializing XFRM netlink socket [ 2.166943] NET: Registered protocol family 10 [ 2.177601] sit: IPv6 over IPv4 tunneling driver [ 2.186326] NET: Registered protocol family 17 [ 2.191253] NET: Registered protocol family 15 [ 2.196511] Key type dns_resolver registered [ 2.201422] omap_voltage_late_init: Voltage driver support not added [ 2.208183] sr_dev_init: No voltage domain specified for smartreflex0. Cannot initialize [ 2.216675] sr_dev_init: No voltage domain specified for smartreflex1. Cannot initialize [ 2.226944] ThumbEE CPU extension supported. [ 2.231594] Registering SWP/SWPB emulation handler [ 2.236644] SmartReflex Class3 initialized [ 2.305912] tps65217 0-0024: TPS65217 ID 0xe version 1.2 [ 2.313212] omap_i2c 44e0b000.i2c: bus 0 rev0.11 at 400 kHz [ 2.323760] mmc1: new high speed MMC card at address 0001 [ 2.335845] omap_i2c 4819c000.i2c: bus 2 rev0.11 at 100 kHz [ 2.344127] mmcblk1: mmc1:0001 MMC02G 1.79 GiB [ 2.351941] hctosys: unable to open rtc device (rtc0) [ 2.357262] sr_init: No PMIC hook to init smartreflex [ 2.363111] sr_init: platform driver register failed for SR [ 2.403049] mmcblk1boot0: mmc1:0001 MMC02G partition 1 1.00 MiB [ 2.411015] mmcblk1boot1: mmc1:0001 MMC02G partition 2 1.00 MiB [ 2.425233] mmcblk1: p1 p2 [ 2.442441] Waiting for root device /dev/mmcblk0p2...
[PYBOOT] [bbb 01:52]: Timed out waiting for "<type 'str'>":
[PYBOOT] [bbb 01:53]: got exception: timeout ~$off
[PYBOOT] [bbb 01:54]: Done. Board beagleboard-x15-arm-multi_lpae_defconfig failure log: -------------------------------------------------
[ 1.727734] at24 0-0050: 4096 byte 24c32 EEPROM, writable, 1 bytes/write [ 1.734819] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 1.760389] rtc-ds1307 2-006f: SET TIME! [ 1.766167] rtc-ds1307 2-006f: rtc core: registered mcp7941x as rtc0 [ 1.772937] rtc-ds1307 2-006f: 64 bytes nvram [ 1.777550] omap_i2c 48060000.i2c: bus 2 rev0.12 at 400 kHz [ 1.785744] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller [ 1.791538] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1 [ 1.799777] xhci-hcd xhci-hcd.0.auto: hcc params 0x0220f04c hci version 0x100 quirks 0x00010010 [ 1.808943] xhci-hcd xhci-hcd.0.auto: irq 400, io mem 0x48890000 [ 1.815815] hub 1-0:1.0: USB hub found [ 1.819772] hub 1-0:1.0: 1 port detected [ 1.824172] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller [ 1.829950] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2 [ 1.838073] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. [ 1.847081] hub 2-0:1.0: USB hub found [ 1.851053] hub 2-0:1.0: 1 port detected [ 1.857068] omap_hsmmc 4809c000.mmc: Got CD GPIO [ 1.890994] vdd_3v3: supplied by regen1 [ 1.927638] rtc-ds1307 2-006f: setting system clock to 2001-01-01 00:00:00 UTC (978307200) [ 1.945463] aic_dvdd_fixed: disabling [ 1.950230] Waiting for root device /dev/mmcblk0p1... [ 1.971961] mmc1: new high speed MMC card at address 0001 [ 1.977930] mmcblk1: mmc1:0001 S10004 3.56 GiB [ 1.982816] mmcblk1boot0: mmc1:0001 S10004 partition 1 4.00 MiB [ 1.989154] mmcblk1boot1: mmc1:0001 S10004 partition 2 4.00 MiB [ 1.996018] mmcblk1: p1 [ 2.129877] usb 1-1: new high-speed USB device number 2 using xhci-hcd [ 2.164906] usb 2-1: new SuperSpeed USB device number 2 using xhci-hcd [ 2.190176] hub 2-1:1.0: USB hub found [ 2.194156] hub 2-1:1.0: 4 ports detected [ 2.286204] hub 1-1:1.0: USB hub found [ 2.290189] hub 1-1:1.0: 4 ports detected
[PYBOOT] [beagleboard-x15 01:46]: Timed out waiting for "<type 'str'>":
[PYBOOT] [beagleboard-x15 01:47]: got exception: timeout ~$off
[PYBOOT] [beagleboard-x15 01:49]: Done. Board beagleboard-x15-arm-multi_v7_defconfig failure log: -------------------------------------------------
[ 1.712425] at24 0-0050: 4096 byte 24c32 EEPROM, writable, 1 bytes/write [ 1.719505] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 1.745671] rtc-ds1307 2-006f: SET TIME! [ 1.751406] rtc-ds1307 2-006f: rtc core: registered mcp7941x as rtc0 [ 1.758153] rtc-ds1307 2-006f: 64 bytes nvram [ 1.762762] omap_i2c 48060000.i2c: bus 2 rev0.12 at 400 kHz [ 1.770947] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller [ 1.776739] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1 [ 1.784984] xhci-hcd xhci-hcd.0.auto: hcc params 0x0220f04c hci version 0x100 quirks 0x00010010 [ 1.794153] xhci-hcd xhci-hcd.0.auto: irq 400, io mem 0x48890000 [ 1.801031] hub 1-0:1.0: USB hub found [ 1.804992] hub 1-0:1.0: 1 port detected [ 1.809395] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller [ 1.815178] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2 [ 1.823293] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. [ 1.832308] hub 2-0:1.0: USB hub found [ 1.836280] hub 2-0:1.0: 1 port detected [ 1.842292] omap_hsmmc 4809c000.mmc: Got CD GPIO [ 1.876289] vdd_3v3: supplied by regen1 [ 1.914362] rtc-ds1307 2-006f: setting system clock to 2001-01-01 00:00:00 UTC (978307200) [ 1.932576] aic_dvdd_fixed: disabling [ 1.937312] Waiting for root device /dev/mmcblk0p1... [ 1.964495] mmc1: new high speed MMC card at address 0001 [ 1.970470] mmcblk1: mmc1:0001 S10004 3.56 GiB [ 1.975366] mmcblk1boot0: mmc1:0001 S10004 partition 1 4.00 MiB [ 1.981706] mmcblk1boot1: mmc1:0001 S10004 partition 2 4.00 MiB [ 1.988570] mmcblk1: p1 [ 2.115173] usb 1-1: new high-speed USB device number 2 using xhci-hcd [ 2.150200] usb 2-1: new SuperSpeed USB device number 2 using xhci-hcd [ 2.175403] hub 2-1:1.0: USB hub found [ 2.179380] hub 2-1:1.0: 4 ports detected [ 2.271428] hub 1-1:1.0: USB hub found [ 2.275414] hub 1-1:1.0: 4 ports detected
[PYBOOT] [beagleboard-x15 01:41]: Timed out waiting for "<type 'str'>":
[PYBOOT] [beagleboard-x15 01:42]: got exception: timeout ~$off
[PYBOOT] [beagleboard-x15 01:43]: Done. Board beagleboard-x15-arm-multi_v7_nosmp_defconfig failure log: -------------------------------------------------
[ 1.590763] at24 0-0050: 4096 byte 24c32 EEPROM, writable, 1 bytes/write [ 1.597811] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 1.623128] rtc-ds1307 2-006f: SET TIME! [ 1.628750] rtc-ds1307 2-006f: rtc core: registered mcp7941x as rtc0 [ 1.635459] rtc-ds1307 2-006f: 64 bytes nvram [ 1.640044] omap_i2c 48060000.i2c: bus 2 rev0.12 at 400 kHz [ 1.647424] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller [ 1.653196] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1 [ 1.661410] xhci-hcd xhci-hcd.0.auto: hcc params 0x0220f04c hci version 0x100 quirks 0x00010010 [ 1.670560] xhci-hcd xhci-hcd.0.auto: irq 400, io mem 0x48890000 [ 1.677275] hub 1-0:1.0: USB hub found [ 1.681235] hub 1-0:1.0: 1 port detected [ 1.685546] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller [ 1.691318] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2 [ 1.699401] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. [ 1.708266] hub 2-0:1.0: USB hub found [ 1.712204] hub 2-0:1.0: 1 port detected [ 1.717457] omap_hsmmc 4809c000.mmc: Got CD GPIO [ 1.753358] vdd_3v3: supplied by regen1 [ 1.784443] rtc-ds1307 2-006f: setting system clock to 2001-01-01 00:00:00 UTC (978307200) [ 1.797388] aic_dvdd_fixed: disabling [ 1.802763] Waiting for root device /dev/mmcblk0p1... [ 1.849671] mmc1: new high speed MMC card at address 0001 [ 1.855537] mmcblk1: mmc1:0001 S10004 3.56 GiB [ 1.860368] mmcblk1boot0: mmc1:0001 S10004 partition 1 4.00 MiB [ 1.866669] mmcblk1boot1: mmc1:0001 S10004 partition 2 4.00 MiB [ 1.873458] mmcblk1: p1 [ 1.992665] usb 1-1: new high-speed USB device number 2 using xhci-hcd [ 2.022685] usb 2-1: new SuperSpeed USB device number 2 using xhci-hcd [ 2.051502] hub 2-1:1.0: USB hub found [ 2.055481] hub 2-1:1.0: 4 ports detected [ 2.147504] hub 1-1:1.0: USB hub found [ 2.151474] hub 1-1:1.0: 4 ports detected
[PYBOOT] [beagleboard-x15 02:01]: Timed out waiting for "<type 'str'>":
[PYBOOT] [beagleboard-x15 02:02]: got exception: timeout ~$off
[PYBOOT] [beagleboard-x15 02:03]: Done. Board beagleboard-x15-arm-omap2plus_defconfig failure log: -------------------------------------------------
[ 2.173847] omap_hsmmc 4809c000.mmc: using device tree for GPIO lookup [ 2.180721] of_get_named_gpiod_flags: parsed 'cd-gpios' property of node '/ocp/mmc@4809c000[0]' - status (0) [ 2.191103] omap_hsmmc 4809c000.mmc: Got CD GPIO [ 2.195969] omap_hsmmc 4809c000.mmc: GPIO lookup for consumer wp [ 2.202269] omap_hsmmc 4809c000.mmc: using device tree for GPIO lookup [ 2.209134] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@4809c000[0]' [ 2.218733] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@4809c000[0]' [ 2.228230] omap_hsmmc 4809c000.mmc: using lookup tables for GPIO lookup [ 2.235292] omap_hsmmc 4809c000.mmc: lookup for GPIO wp failed [ 2.283793] omap_hsmmc 480b4000.mmc: GPIO lookup for consumer cd [ 2.290089] omap_hsmmc 480b4000.mmc: using device tree for GPIO lookup [ 2.296963] of_get_named_gpiod_flags: can't parse 'cd-gpios' property of node '/ocp/mmc@480b4000[0]' [ 2.306551] of_get_named_gpiod_flags: can't parse 'cd-gpio' property of node '/ocp/mmc@480b4000[0]' [ 2.316046] omap_hsmmc 480b4000.mmc: using lookup tables for GPIO lookup [ 2.323084] omap_hsmmc 480b4000.mmc: lookup for GPIO cd failed [ 2.329204] omap_hsmmc 480b4000.mmc: GPIO lookup for consumer wp [ 2.335513] omap_hsmmc 480b4000.mmc: using device tree for GPIO lookup [ 2.342358] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@480b4000[0]' [ 2.351946] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@480b4000[0]' [ 2.361433] omap_hsmmc 480b4000.mmc: using lookup tables for GPIO lookup [ 2.368477] omap_hsmmc 480b4000.mmc: lookup for GPIO wp failed [ 2.375173] vdd_3v3: supplied by regen1 [ 2.413898] hctosys: unable to open rtc device (rtc0) [ 2.419200] sr_init: No PMIC hook to init smartreflex [ 2.424709] sr_init: platform driver register failed for SR [ 2.471800] aic_dvdd_fixed: disabling [ 2.476057] ldousb: disabling [ 2.483319] Waiting for root device /dev/mmcblk0p1... [ 2.535513] mmc1: new high speed MMC card at address 0001 [ 2.543267] mmcblk1: mmc1:0001 S10004 3.56 GiB [ 2.548562] mmcblk1boot0: mmc1:0001 S10004 partition 1 4.00 MiB [ 2.555408] mmcblk1boot1: mmc1:0001 S10004 partition 2 4.00 MiB [ 2.563910] mmcblk1: p1
[PYBOOT] [beagleboard-x15 01:44]: Timed out waiting for "<type 'str'>":
[PYBOOT] [beagleboard-x15 01:45]: got exception: timeout ~$off
[PYBOOT] [beagleboard-x15 01:46]: Done. Board colombus-arm-multi_v7_nosmp_defconfig failure log: -------------------------------------------------
[....] Waiting for /dev to be fully populated...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [....] Activating swap...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [ 41.855724] EXT4-fs (mmcblk0p1): warning: mounting fs with errors, running e2fsck is recommended [ 41.870055] EXT4-fs (mmcblk0p1): re-mounted. Opts: (null) [....] Cleaning up temporary files... /tmp[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0c. [....] Activating lvm and md swap...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [....] Checking file systems...fsck from util-linux 2.20.1 [?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [....] Mounting local filesystems...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [....] Activating swapfile swap...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [....] Cleaning up temporary files...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0c. [....] Setting kernel variables ...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [ 85.196042] random: dd urandom read with 99 bits of entropy available [....] Configuring network interfaces...Internet Systems Consortium DHCP Client 4.2.2 Copyright 2004-2011 Internet Systems Consortium. All rights reserved. For info, please visit https://www.isc.org/software/dhcp/
[ 89.589169] eth0: device MAC address 06:63:df:2a:67:9b [ 89.744959] RX IPC Checksum Offload disabled [ 89.749570] No MAC Management Counters available [ 89.755315] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready Listening on LPF/eth0/06:63:df:2a:67:9b Sending on LPF/eth0/06:63:df:2a:67:9b Sending on Socket/fallback DHCPREQUEST on eth0 to 255.255.255.255 port 67 DHCPREQUEST on eth0 to 255.255.255.255 port 67 DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 4 DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 7 DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 21 [ 134.802674] random: nonblocking pool is initialized DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 20 DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 9
[PYBOOT] [colombus 03:17]: Timed out waiting for "<type 'str'>":
[PYBOOT] [colombus 03:18]: got exception: timeout ~$off
[PYBOOT] [colombus 03:19]: Done. Board cosmic-arm-imx_v6_v7_defconfig failure log: -------------------------------------------------
[ 14.396897] blk_update_request: I/O error, dev mmcblk0, sector 3633185 [ 18.471135] mmcblk0: error -110 transferring data, sector 3633186, nr 230, cmd response 0x900, card status 0x0 [ 18.481243] blk_update_request: I/O error, dev mmcblk0, sector 3633186 [ 22.555432] mmcblk0: error -110 transferring data, sector 3633187, nr 229, cmd response 0x900, card status 0x0 [ 22.565543] blk_update_request: I/O error, dev mmcblk0, sector 3633187 [ 26.639782] mmcblk0: error -110 transferring data, sector 3633188, nr 228, cmd response 0x900, card status 0x0 [ 26.649889] blk_update_request: I/O error, dev mmcblk0, sector 3633188 [ 30.724070] mmcblk0: error -110 transferring data, sector 3633189, nr 227, cmd response 0x900, card status 0x0 [ 30.734173] blk_update_request: I/O error, dev mmcblk0, sector 3633189 [ 34.808405] mmcblk0: error -110 transferring data, sector 3633190, nr 226, cmd response 0x900, card status 0x0 [ 34.818513] blk_update_request: I/O error, dev mmcblk0, sector 3633190 [ 38.892749] mmcblk0: error -110 transferring data, sector 3633191, nr 225, cmd response 0x900, card status 0x0 [ 38.902857] blk_update_request: I/O error, dev mmcblk0, sector 3633191 [ 42.977119] mmcblk0: error -110 transferring data, sector 3633192, nr 224, cmd response 0x900, card status 0x0 [ 42.987227] blk_update_request: I/O error, dev mmcblk0, sector 3633192 [ 47.061461] mmcblk0: error -110 transferring data, sector 3633193, nr 223, cmd response 0x900, card status 0x0 [ 47.071565] blk_update_request: I/O error, dev mmcblk0, sector 3633193 [ 51.145740] mmcblk0: error -110 transferring data, sector 3633194, nr 222, cmd response 0x900, card status 0x0 [ 51.155842] blk_update_request: I/O error, dev mmcblk0, sector 3633194 [ 55.230060] mmcblk0: error -110 transferring data, sector 3633195, nr 221, cmd response 0x900, card status 0x0 [ 55.240163] blk_update_request: I/O error, dev mmcblk0, sector 3633195 [ 59.314333] mmcblk0: error -110 transferring data, sector 3633196, nr 220, cmd response 0x900, card status 0x0 [ 59.324440] blk_update_request: I/O error, dev mmcblk0, sector 3633196 [ 63.398739] mmcblk0: error -110 transferring data, sector 3633197, nr 219, cmd response 0x900, card status 0x0 [ 63.408837] blk_update_request: I/O error, dev mmcblk0, sector 3633197 [ 67.483012] mmcblk0: error -110 transferring data, sector 3633198, nr 218, cmd response 0x900, card status 0x0 [ 67.493121] blk_update_request: I/O error, dev mmcblk0, sector 3633198 [ 71.567355] mmcblk0: error -110 transferring data, sector 3633199, nr 217, cmd response 0x900, card status 0x0 [ 71.577458] blk_update_request: I/O error, dev mmcblk0, sector 3633199 [ 75.651704] mmcblk0: error -110 transferring data, sector 3633200, nr 216, cmd response 0x900, card status 0x0 [ 75.661813] blk_update_request: I/O error, dev mmcblk0, sector 3633200 [ 79.735989] mmcblk0: error -110 transferring data, sector 3633201, nr 215, cmd response 0x900, card status 0x0 [ 79.746096] blk_update_request: I/O error, dev mmcblk0, sector 3633201
[PYBOOT] [cosmic 01:58]: Timed out waiting for "<type 'str'>":
[PYBOOT] [cosmic 01:59]: got exception: timeout ~$off
[PYBOOT] [cosmic 02:00]: Done. Board cosmic-arm-multi_v7_defconfig failure log: -------------------------------------------------
[ 14.082147] blk_update_request: I/O error, dev mmcblk0, sector 3633185 [ 18.156135] mmcblk0: error -110 transferring data, sector 3633186, nr 230, cmd response 0x900, card status 0x0 [ 18.166207] blk_update_request: I/O error, dev mmcblk0, sector 3633186 [ 22.240191] mmcblk0: error -110 transferring data, sector 3633187, nr 229, cmd response 0x900, card status 0x0 [ 22.250266] blk_update_request: I/O error, dev mmcblk0, sector 3633187 [ 26.324251] mmcblk0: error -110 transferring data, sector 3633188, nr 228, cmd response 0x900, card status 0x0 [ 26.334327] blk_update_request: I/O error, dev mmcblk0, sector 3633188 [ 30.408317] mmcblk0: error -110 transferring data, sector 3633189, nr 227, cmd response 0x900, card status 0x0 [ 30.418396] blk_update_request: I/O error, dev mmcblk0, sector 3633189 [ 34.492388] mmcblk0: error -110 transferring data, sector 3633190, nr 226, cmd response 0x900, card status 0x0 [ 34.502474] blk_update_request: I/O error, dev mmcblk0, sector 3633190 [ 38.576461] mmcblk0: error -110 transferring data, sector 3633191, nr 225, cmd response 0x900, card status 0x0 [ 38.586527] blk_update_request: I/O error, dev mmcblk0, sector 3633191 [ 42.660515] mmcblk0: error -110 transferring data, sector 3633192, nr 224, cmd response 0x900, card status 0x0 [ 42.670587] blk_update_request: I/O error, dev mmcblk0, sector 3633192 [ 46.744638] mmcblk0: error -110 transferring data, sector 3633193, nr 223, cmd response 0x900, card status 0x0 [ 46.754704] blk_update_request: I/O error, dev mmcblk0, sector 3633193 [ 50.828689] mmcblk0: error -110 transferring data, sector 3633194, nr 222, cmd response 0x900, card status 0x0 [ 50.838760] blk_update_request: I/O error, dev mmcblk0, sector 3633194 [ 54.912749] mmcblk0: error -110 transferring data, sector 3633195, nr 221, cmd response 0x900, card status 0x0 [ 54.922820] blk_update_request: I/O error, dev mmcblk0, sector 3633195 [ 58.996806] mmcblk0: error -110 transferring data, sector 3633196, nr 220, cmd response 0x900, card status 0x0 [ 59.006880] blk_update_request: I/O error, dev mmcblk0, sector 3633196 [ 63.080865] mmcblk0: error -110 transferring data, sector 3633197, nr 219, cmd response 0x900, card status 0x0 [ 63.090938] blk_update_request: I/O error, dev mmcblk0, sector 3633197 [ 67.164923] mmcblk0: error -110 transferring data, sector 3633198, nr 218, cmd response 0x900, card status 0x0 [ 67.175000] blk_update_request: I/O error, dev mmcblk0, sector 3633198 [ 71.248981] mmcblk0: error -110 transferring data, sector 3633199, nr 217, cmd response 0x900, card status 0x0 [ 71.259060] blk_update_request: I/O error, dev mmcblk0, sector 3633199 [ 75.333046] mmcblk0: error -110 transferring data, sector 3633200, nr 216, cmd response 0x900, card status 0x0 [ 75.343127] blk_update_request: I/O error, dev mmcblk0, sector 3633200 [ 79.417117] mmcblk0: error -110 transferring data, sector 3633201, nr 215, cmd response 0x900, card status 0x0 [ 79.427196] blk_update_request: I/O error, dev mmcblk0, sector 3633201
[PYBOOT] [cosmic 02:07]: Timed out waiting for "<type 'str'>":
[PYBOOT] [cosmic 02:08]: got exception: timeout ~$off
[PYBOOT] [cosmic 02:10]: Done. Board cosmic-arm-multi_v7_nosmp_defconfig failure log: -------------------------------------------------
[ 13.872370] blk_update_request: I/O error, dev mmcblk0, sector 3633185 [ 17.946286] mmcblk0: error -110 transferring data, sector 3633186, nr 230, cmd response 0x900, card status 0x0 [ 17.956343] blk_update_request: I/O error, dev mmcblk0, sector 3633186 [ 22.030257] mmcblk0: error -110 transferring data, sector 3633187, nr 229, cmd response 0x900, card status 0x0 [ 22.040317] blk_update_request: I/O error, dev mmcblk0, sector 3633187 [ 26.114231] mmcblk0: error -110 transferring data, sector 3633188, nr 228, cmd response 0x900, card status 0x0 [ 26.124291] blk_update_request: I/O error, dev mmcblk0, sector 3633188 [ 30.198202] mmcblk0: error -110 transferring data, sector 3633189, nr 227, cmd response 0x900, card status 0x0 [ 30.208264] blk_update_request: I/O error, dev mmcblk0, sector 3633189 [ 34.282177] mmcblk0: error -110 transferring data, sector 3633190, nr 226, cmd response 0x900, card status 0x0 [ 34.292239] blk_update_request: I/O error, dev mmcblk0, sector 3633190 [ 38.366159] mmcblk0: error -110 transferring data, sector 3633191, nr 225, cmd response 0x900, card status 0x0 [ 38.376228] blk_update_request: I/O error, dev mmcblk0, sector 3633191 [ 42.450158] mmcblk0: error -110 transferring data, sector 3633192, nr 224, cmd response 0x900, card status 0x0 [ 42.460218] blk_update_request: I/O error, dev mmcblk0, sector 3633192 [ 46.534132] mmcblk0: error -110 transferring data, sector 3633193, nr 223, cmd response 0x900, card status 0x0 [ 46.544177] blk_update_request: I/O error, dev mmcblk0, sector 3633193 [ 50.618087] mmcblk0: error -110 transferring data, sector 3633194, nr 222, cmd response 0x900, card status 0x0 [ 50.628134] blk_update_request: I/O error, dev mmcblk0, sector 3633194 [ 54.702041] mmcblk0: error -110 transferring data, sector 3633195, nr 221, cmd response 0x900, card status 0x0 [ 54.712089] blk_update_request: I/O error, dev mmcblk0, sector 3633195 [ 58.785994] mmcblk0: error -110 transferring data, sector 3633196, nr 220, cmd response 0x900, card status 0x0 [ 58.796045] blk_update_request: I/O error, dev mmcblk0, sector 3633196 [ 62.869957] mmcblk0: error -110 transferring data, sector 3633197, nr 219, cmd response 0x900, card status 0x0 [ 62.880010] blk_update_request: I/O error, dev mmcblk0, sector 3633197 [ 66.953924] mmcblk0: error -110 transferring data, sector 3633198, nr 218, cmd response 0x900, card status 0x0 [ 66.963983] blk_update_request: I/O error, dev mmcblk0, sector 3633198 [ 71.037895] mmcblk0: error -110 transferring data, sector 3633199, nr 217, cmd response 0x900, card status 0x0 [ 71.047948] blk_update_request: I/O error, dev mmcblk0, sector 3633199 [ 75.121861] mmcblk0: error -110 transferring data, sector 3633200, nr 216, cmd response 0x900, card status 0x0 [ 75.131922] blk_update_request: I/O error, dev mmcblk0, sector 3633200 [ 79.205830] mmcblk0: error -110 transferring data, sector 3633201, nr 215, cmd response 0x900, card status 0x0 [ 79.215886] blk_update_request: I/O error, dev mmcblk0, sector 3633201
[PYBOOT] [cosmic 02:02]: Timed out waiting for "<type 'str'>":
[PYBOOT] [cosmic 02:03]: got exception: timeout ~$off
[PYBOOT] [cosmic 02:04]: Done. Board dalmore-arm-multi_lpae_defconfig failure log: -------------------------------------------------
[ 2.486321] Key type dns_resolver registered [ 2.492741] ThumbEE CPU extension supported. [ 2.497159] Registering SWP/SWPB emulation handler [ 2.534731] vdd-sys-5v0: supplied by vdd_ac_bat [ 2.542212] VDD_5V0_HDMI_CON: supplied by vdd-sys-5v0 [ 2.551271] vdd_hdmi_5v0: supplied by vdd-sys-5v0 [ 2.574771] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 2.581556] [drm] No driver support for vblank timestamp query. [ 2.613070] mmc1: new high speed MMC card at address 0001 [ 2.622163] mmcblk1: mmc1:0001 SEM32G 29.1 GiB [ 2.627976] mmcblk1boot0: mmc1:0001 SEM32G partition 1 4.00 MiB [ 2.636385] mmcblk1boot1: mmc1:0001 SEM32G partition 2 4.00 MiB [ 2.644923] mmcblk1rpmb: mmc1:0001 SEM32G partition 3 4.00 MiB [ 2.655646] mmcblk1: p1 [ 2.761851] Console: switching to colour frame buffer device 240x75 [ 2.849168] drm drm: fb0: frame buffer device [ 2.869101] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 2.879210] usb2_vbus: supplied by vdd-sys-5v0 [ 2.890836] tegra-ehci 7d008000.usb: EHCI Host Controller [ 2.896417] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 1 [ 2.905289] tegra-ehci 7d008000.usb: irq 339, io mem 0x7d008000 [ 2.919132] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.10 [ 2.929592] hub 1-0:1.0: USB hub found [ 2.933592] hub 1-0:1.0: 1 port detected [ 2.943677] input: gpio-keys as /devices/soc0/gpio-keys/input/input0 [ 2.957518] palmas-rtc 7000d000.i2c:tps65913@58:rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800) [ 3.020557] dvdd_ts: disabling [ 3.023664] usb1_vbus: disabling [ 3.027056] vdd_cam_1v8_reg: disabling [ 3.034621] Waiting for root device /dev/mmcblk0p1... [ 3.244135] usb 1-1: new high-speed USB device number 2 using tegra-ehci [ 4.222346] asix 1-1:1.0 eth0: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 48:f8:b3:2b:29:1f [ 49.818406] random: nonblocking pool is initialized
[PYBOOT] [dalmore 01:56]: Timed out waiting for "<type 'str'>":
[PYBOOT] [dalmore 01:57]: got exception: timeout ~$off
[PYBOOT] [dalmore 01:58]: Done. Board dalmore-arm-multi_v7_defconfig failure log: -------------------------------------------------
[ 2.486775] Key type dns_resolver registered [ 2.493178] ThumbEE CPU extension supported. [ 2.497601] Registering SWP/SWPB emulation handler [ 2.531572] vdd-sys-5v0: supplied by vdd_ac_bat [ 2.538608] VDD_5V0_HDMI_CON: supplied by vdd-sys-5v0 [ 2.547963] vdd_hdmi_5v0: supplied by vdd-sys-5v0 [ 2.563537] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 2.570305] [drm] No driver support for vblank timestamp query. [ 2.582281] mmc1: new high speed MMC card at address 0001 [ 2.591190] mmcblk1: mmc1:0001 SEM32G 29.1 GiB [ 2.597904] mmcblk1boot0: mmc1:0001 SEM32G partition 1 4.00 MiB [ 2.607557] mmcblk1boot1: mmc1:0001 SEM32G partition 2 4.00 MiB [ 2.617565] mmcblk1rpmb: mmc1:0001 SEM32G partition 3 4.00 MiB [ 2.628403] mmcblk1: p1 [ 2.750001] Console: switching to colour frame buffer device 240x75 [ 2.837508] drm drm: fb0: frame buffer device [ 2.854193] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 2.864300] usb2_vbus: supplied by vdd-sys-5v0 [ 2.875933] tegra-ehci 7d008000.usb: EHCI Host Controller [ 2.881527] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 1 [ 2.890275] tegra-ehci 7d008000.usb: irq 339, io mem 0x7d008000 [ 2.904208] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.10 [ 2.914633] hub 1-0:1.0: USB hub found [ 2.918639] hub 1-0:1.0: 1 port detected [ 2.928730] input: gpio-keys as /devices/soc0/gpio-keys/input/input0 [ 2.942598] palmas-rtc 7000d000.i2c:tps65913@58:rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800) [ 3.005762] dvdd_ts: disabling [ 3.008982] usb1_vbus: disabling [ 3.012241] vdd_cam_1v8_reg: disabling [ 3.019705] Waiting for root device /dev/mmcblk0p1... [ 3.229213] usb 1-1: new high-speed USB device number 2 using tegra-ehci [ 4.207839] asix 1-1:1.0 eth0: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 48:f8:b3:2b:29:1f [ 50.022553] random: nonblocking pool is initialized
[PYBOOT] [dalmore 01:55]: Timed out waiting for "<type 'str'>":
[PYBOOT] [dalmore 01:56]: got exception: timeout ~$off
[PYBOOT] [dalmore 01:57]: Done. Board dalmore-arm-multi_v7_nosmp_defconfig failure log: -------------------------------------------------
[ 2.031161] can: broadcast manager protocol (rev 20120528 t) [ 2.036922] can: netlink gateway (rev 20130117) max_hops=1 [ 2.043573] Key type dns_resolver registered [ 2.048693] ThumbEE CPU extension supported. [ 2.079557] vdd-sys-5v0: supplied by vdd_ac_bat [ 2.084461] VDD_5V0_HDMI_CON: supplied by vdd-sys-5v0 [ 2.094554] vdd_hdmi_5v0: supplied by vdd-sys-5v0 [ 2.114713] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 2.121384] [drm] No driver support for vblank timestamp query. [ 2.285127] Console: switching to colour frame buffer device 240x75 [ 2.371015] drm drm: fb0: frame buffer device [ 2.375631] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 2.383603] usb2_vbus: supplied by vdd-sys-5v0 [ 2.389608] mmc1: new high speed MMC card at address 0001 [ 2.398769] tegra-ehci 7d008000.usb: EHCI Host Controller [ 2.404380] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 1 [ 2.412443] mmcblk1: mmc1:0001 SEM32G 29.1 GiB [ 2.417452] mmcblk1boot0: mmc1:0001 SEM32G partition 1 4.00 MiB [ 2.424157] tegra-ehci 7d008000.usb: irq 339, io mem 0x7d008000 [ 2.430224] mmcblk1boot1: mmc1:0001 SEM32G partition 2 4.00 MiB [ 2.436591] mmcblk1rpmb: mmc1:0001 SEM32G partition 3 4.00 MiB [ 2.443355] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.10 [ 2.450471] mmcblk1: p1 [ 2.455338] hub 1-0:1.0: USB hub found [ 2.463594] hub 1-0:1.0: 1 port detected [ 2.471718] input: gpio-keys as /devices/soc0/gpio-keys/input/input0 [ 2.482990] palmas-rtc 7000d000.i2c:tps65913@58:rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800) [ 2.517603] dvdd_ts: disabling [ 2.520752] usb1_vbus: disabling [ 2.524033] vdd_cam_1v8_reg: disabling [ 2.529503] Waiting for root device /dev/mmcblk0p1... [ 2.774567] usb 1-1: new high-speed USB device number 2 using tegra-ehci [ 3.726874] asix 1-1:1.0 eth0: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 48:f8:b3:2b:29:1f
[PYBOOT] [dalmore 01:48]: Timed out waiting for "<type 'str'>":
[PYBOOT] [dalmore 01:49]: got exception: timeout ~$off
[PYBOOT] [dalmore 01:50]: Done. Board dalmore-arm-tegra_defconfig failure log: -------------------------------------------------
[ 2.666621] Bluetooth: RFCOMM ver 1.11 [ 2.670574] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 2.675970] Bluetooth: BNEP socket layer initialized [ 2.681068] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 2.687065] Bluetooth: HIDP socket layer initialized [ 2.694060] Key type dns_resolver registered [ 2.703655] Registering SWP/SWPB emulation handler [ 2.734274] vdd-sys-5v0: supplied by vdd_ac_bat [ 2.741323] VDD_5V0_HDMI_CON: supplied by vdd-sys-5v0 [ 2.749294] vdd_hdmi_5v0: supplied by vdd-sys-5v0 [ 2.773144] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 2.779963] [drm] No driver support for vblank timestamp query. [ 2.957861] Console: switching to colour frame buffer device 240x75 [ 3.044765] drm drm: fb0: frame buffer device [ 3.079148] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 3.086379] usb2_vbus: supplied by vdd-sys-5v0 [ 3.094853] tegra-ehci 7d008000.usb: EHCI Host Controller [ 3.100671] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 1 [ 3.109839] tegra-ehci 7d008000.usb: irq 339, io mem 0x7d008000 [ 3.129158] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.10 [ 3.143238] hub 1-0:1.0: USB hub found [ 3.147196] hub 1-0:1.0: 1 port detected [ 3.161402] input: gpio-keys as /devices/soc0/gpio-keys/input/input1 [ 3.178487] palmas-rtc 7000d000.i2c:tps65913@58:rtc: setting system clock to 2000-01-01 00:00:01 UTC (946684801) [ 3.273621] dvdd_ts: disabling [ 3.276724] usb1_vbus: disabling [ 3.280111] vdd_cam_1v8_reg: disabling [ 3.284787] ALSA device list: [ 3.287778] #0: NVIDIA Tegra Dalmore [ 3.293656] Waiting for root device /dev/mmcblk0p1... [ 3.469155] usb 1-1: new high-speed USB device number 2 using tegra-ehci [ 4.492480] asix 1-1:1.0 eth0: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 48:f8:b3:2b:29:1f [ 62.069112] random: nonblocking pool is initialized
[PYBOOT] [dalmore 01:47]: Timed out waiting for "<type 'str'>":
[PYBOOT] [dalmore 01:48]: got exception: timeout ~$off
[PYBOOT] [dalmore 01:49]: Done. Board odroidu3-arm-exynos_defconfig failure log: -------------------------------------------------
[ 1.642382] usb 1-3: new high-speed USB device number 2 using exynos-ehci [ 1.651298] dwmmc_exynos 12550000.mmc: allocated mmc-pwrseq [ 1.682424] dwmmc_exynos 12550000.mmc: 1 slots initialized [ 1.683600] usbcore: registered new interface driver usbhid [ 1.688840] usbhid: USB HID core driver [ 1.697532] NET: Registered protocol family 10 [ 1.698157] sit: IPv6 over IPv4 tunneling driver [ 1.701363] NET: Registered protocol family 17 [ 1.705397] NET: Registered protocol family 15 [ 1.709847] Key type dns_resolver registered [ 1.714177] Registering SWP/SWPB emulation handler [ 1.720007] s3c-rtc 10070000.rtc: rtc disabled, re-enabling [ 1.724421] s3c-rtc 10070000.rtc: warning: invalid RTC value so initializing it [ 1.731821] s3c-rtc 10070000.rtc: rtc core: registered s3c as rtc1 [ 1.751308] mmc_host mmc1: Bus speed (slot 0) = 44000000Hz (slot req 52000000Hz, actual 44000000HZ div = 0) [ 1.755589] mmc_host mmc1: Bus speed (slot 0) = 73333333Hz (slot req 52000000Hz, actual 36666666HZ div = 1) [ 1.762943] max98090 1-0010: MAX98090 REVID=0x43 [ 1.765161] max98090 1-0010: use default 2.8v micbias [ 1.775226] mmc1: new DDR MMC card at address 0001 [ 1.780475] mmcblk1: mmc1:0001 008G92 7.28 GiB [ 1.783862] asoc-simple-card sound: HiFi <-> 3830000.i2s mapping ok [ 1.786811] input: gpio_keys as /devices/platform/gpio_keys/input/input0 [ 1.797180] mmcblk1boot0: mmc1:0001 008G92 partition 1 4.00 MiB [ 1.803068] mmcblk1boot1: mmc1:0001 008G92 partition 2 4.00 MiB [ 1.808983] mmcblk1rpmb: mmc1:0001 008G92 partition 3 512 KiB [ 1.815542] mmcblk1: p1 p2 [ 1.820130] max77686-rtc max77686-rtc: setting system clock to 2000-01-01 01:00:19 UTC (946688419) [ 1.842061] VDD10_HDMI_1.0V: disabling [ 1.842755] vdd_g3d: disabling [ 1.843832] BUCK8_2.8V: disabling [ 1.847825] ALSA device list: [ 1.849453] #0: Odroid-U3 [ 1.853170] Waiting for root device /dev/mmcblk0p2...
[PYBOOT] [odroidu3 01:48]: Timed out waiting for "<type 'str'>":
[PYBOOT] [odroidu3 01:49]: got exception: timeout ~$off
[PYBOOT] [odroidu3 01:50]: Done. Board omap5uevm-arm-multi_lpae_defconfig failure log: -------------------------------------------------
[ 2.110746] task: ee06c000 ti: ee05a000 task.ti: ee05a000 [ 2.116401] PC is at kset_find_obj+0x24/0xb0 [ 2.120865] LR is at kset_find_obj+0x38/0xb0 [ 2.125333] pc : [<c058dac4>] lr : [<c058dad8>] psr: 80000013 [ 2.125333] sp : ee05bed8 ip : c13a29c0 fp : 00000000 [ 2.137358] r10: 00000008 r9 : 00000118 r8 : 00000000 [ 2.142827] r7 : c1140c48 r6 : c0edb3f8 r5 : ee042700 r4 : 2d2cb88c [ 2.149656] r3 : 00000073 r2 : 00000067 r1 : c0edb3f9 r0 : 00000001 [ 2.156496] Flags: Nzcv IRQs on FIQs on Mode SVC_32 ISA ARM Segment none [ 2.163969] Control: 10c5387d Table: 8020406a DAC: 00000051 [ 2.169978] Process swapper/0 (pid: 1, stack limit = 0xee05a220) [ 2.176258] Stack: (0xee05bed8 to 0xee05c000) [ 2.180818] bec0: c13bde7c c1306890 [ 2.189384] bee0: ee63afc0 c077b7b4 c13bde7c c077b838 c1306890 c1306890 ee63afc0 c0301e7c [ 2.197947] bf00: 00000000 cccccccd 00000000 c0464d8c c0c0b400 ee132880 00000000 c133659c [ 2.206511] bf20: c101e86c c0c1ceac 00000118 c035b858 c0eca318 c101d28c 00000000 00000007 [ 2.215073] bf40: 00000007 c0ee0968 c1336584 c1410000 c1410000 c1410000 c1410000 c1203228 [ 2.223646] bf60: c11a3838 c11a383c 00000118 c1100db0 00000007 00000007 00000000 c11005ac [ 2.232213] bf80: 00000000 00000000 c0b4fc6c 00000000 00000000 00000000 00000000 00000000 [ 2.240780] bfa0: 00000000 c0b4fc74 00000000 c0307d38 00000000 00000000 00000000 00000000 [ 2.249340] bfc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 [ 2.257908] bfe0: 00000000 00000000 00000000 00000000 00000013 00000000 0999c0cd e9d898e8 [ 2.266480] [<c058dac4>] (kset_find_obj) from [<c077b7b4>] (driver_find+0x14/0x30) [ 2.274409] [<c077b7b4>] (driver_find) from [<c077b838>] (driver_register+0x68/0xf4) [ 2.282521] [<c077b838>] (driver_register) from [<c0301e7c>] (do_one_initcall+0x90/0x1d4) [ 2.291083] [<c0301e7c>] (do_one_initcall) from [<c1100db0>] (kernel_init_freeable+0x158/0x1e8) [ 2.300193] [<c1100db0>] (kernel_init_freeable) from [<c0b4fc74>] (kernel_init+0x8/0x114) [ 2.308760] [<c0b4fc74>] (kernel_init) from [<c0307d38>] (ret_from_fork+0x14/0x3c) [ 2.316682] Code: e5954000 e1550004 12444004 0a00000a (e5940000) [ 2.323067] ---[ end trace f87572678ce2117d ]--- [ 2.327911] Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b [ 2.327911] [ 3.314431] SMP: failed to stop secondary CPUs [ 3.319085] ---[ end Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b [ 3.319085]
[PYBOOT] [omap5uevm 00:48]: got exception: panic ~$off
[PYBOOT] [omap5uevm 00:49]: Done. Board omap5uevm-arm-multi_v7_defconfig failure log: -------------------------------------------------
[ 2.751561] 7e00: ee625990 00000001 00000000 c2009c40 ee663310 00000000 ee665580 ee66520c [ 2.760126] 7e20: ee6655c0 ee189240 ee665380 c05c5478 ee665200 c143b968 024080c0 c0f09c70 [ 2.768688] 7e40: c1341ea4 c1341edc ee19da10 ee19da10 ee6651d0 ee19da10 c13c4f5c ee0b6000 [ 2.777251] 7e60: 0000000f ee00b000 ee03ec00 c05c55cc ee19da10 ee665190 c144fcfc c07985cc [ 2.785811] 7e80: ee19da10 c144fcf4 c144fcfc c077ae38 00000000 ee087ec8 c077b124 00000001 [ 2.794374] 7ea0: ee0b6000 00000000 ee00b000 c07793dc ee03fb70 ee62d3b8 ee19da10 ee19da44 [ 2.802934] 7ec0: c13a29c0 c077acd4 ee19da10 00000001 2ddd1000 ee19da10 ee19da10 c13a29c0 [ 2.811499] 7ee0: c13a27e0 c077a1b8 ee19da10 c13a27c0 c13a27c0 c077a644 c13a27f4 ee03ec00 [ 2.820061] 7f00: ee00b000 00000000 ee0b6000 c0356718 c1302100 ee00b018 ee00b000 ee03ec18 [ 2.828620] 7f20: 00000088 c1302100 ee00b018 ee086000 ee00b000 c0357384 ee00b168 00000000 [ 2.837188] 7f40: c035734c 00000000 ee03dc40 ee03ec00 c035734c 00000000 00000000 00000000 [ 2.845748] 7f60: 00000000 c035c140 00000001 00000000 00080405 ee03ec00 00000000 00000000 [ 2.854309] 7f80: ee087f80 ee087f80 00000001 00010001 ee087f90 ee087f90 ee03dc40 ee03dc40 [ 2.862871] 7fa0: c035c064 00000000 00000000 c0307d38 00000000 00000000 00000000 00000000 [ 2.871437] 7fc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 [ 2.880005] 7fe0: 00000000 00000000 00000000 00000000 00000013 00000000 3005c023 71808600 [ 2.888570] [<c035c568>] (kthread_data) from [<c0357968>] (wq_worker_sleeping+0x8/0xd0) [ 2.896952] [<c0357968>] (wq_worker_sleeping) from [<c0b515a4>] (__schedule+0x380/0x590) [ 2.905429] [<c0b515a4>] (__schedule) from [<c0b517f8>] (schedule+0x44/0x9c) [ 2.912811] [<c0b517f8>] (schedule) from [<c034386c>] (do_exit+0x678/0xa18) [ 2.920107] [<c034386c>] (do_exit) from [<c030bd7c>] (die+0x410/0x474) [ 2.926946] [<c030bd7c>] (die) from [<c031cb9c>] (__do_kernel_fault.part.0+0x64/0x1e4) [ 2.935238] [<c031cb9c>] (__do_kernel_fault.part.0) from [<c0317c10>] (do_page_fault+0x370/0x384) [ 2.944533] [<c0317c10>] (do_page_fault) from [<c030137c>] (do_PrefetchAbort+0x38/0x9c) [ 2.952915] [<c030137c>] (do_PrefetchAbort) from [<c030c58c>] (__pabt_svc+0x4c/0x80) [ 2.961017] Exception stack(0xee087d88 to 0xee087dd0) [ 2.966308] 7d80: ee370810 00000005 0000006d c05d1c2c 00000005 ee365880 [ 2.974879] 7da0: 00000005 eefe6d44 0000000e ee6655c0 ee663310 00000000 ed809160 ee087dd8 [ 2.983441] 7dc0: c05d1c38 0000006c 20000033 ffffffff [ 2.988730] [<c030c58c>] (__pabt_svc) from [<0000006c>] (0x6c) [ 2.994843] Code: ebff888a e1a00006 e8bd81f0 e59032f8 (e5130014) [ 3.001225] ---[ end trace 40ef52404a5dde9c ]--- [ 3.006061] Fixing recursive fault but reboot is needed!
[PYBOOT] [omap5uevm 02:04]: Timed out waiting for "<type 'str'>":
[PYBOOT] [omap5uevm 02:05]: got exception: timeout ~$off
[PYBOOT] [omap5uevm 02:06]: Done. Board omap5uevm-arm-multi_v7_nosmp_defconfig failure log: -------------------------------------------------
[ 2.872181] [<c0301620>] (gic_handle_irq) from [<c030bcd4>] (__irq_svc+0x54/0x70) [ 2.880007] Exception stack(0xee501b78 to 0xee501bc0) [ 2.885295] 1b60: 00000001 ee072254 [ 2.893858] 1b80: 00000000 ee502000 ee482200 00000000 ee06c000 00000000 ee501bc8 ee4823a8 [ 2.902424] 1ba0: c0934b92 00000000 ee072240 ee501bc8 c0357e7c c03373b0 60000113 ffffffff [ 2.910979] [<c030bcd4>] (__irq_svc) from [<c03373b0>] (do_exit+0x524/0x908) [ 2.918367] [<c03373b0>] (do_exit) from [<c030b5c4>] (die+0x328/0x394) [ 2.925200] [<c030b5c4>] (die) from [<c031a290>] (__do_kernel_fault.part.0+0x64/0x1e4) [ 2.933487] [<c031a290>] (__do_kernel_fault.part.0) from [<c0315580>] (do_page_fault+0x370/0x384) [ 2.942776] [<c0315580>] (do_page_fault) from [<c030125c>] (do_DataAbort+0x3c/0xb8) [ 2.950790] [<c030125c>] (do_DataAbort) from [<c030bc60>] (__dabt_svc+0x40/0x60) [ 2.958523] Exception stack(0xee501d50 to 0xee501d98) [ 2.963809] 1d40: 00000000 00000087 0000003a 00000000 [ 2.972374] 1d60: 20000013 00000000 00000001 c200af44 c200af44 00000000 00000000 00000000 [ 2.980932] 1d80: ee501de8 ee501da0 c0934f4c c0934b90 60000093 ffffffff [ 2.987862] [<c030bc60>] (__dabt_svc) from [<c0934b90>] (__of_find_all_nodes.part.2+0x14/0x2c) [ 2.996886] [<c0934b90>] (__of_find_all_nodes.part.2) from [<c0934f4c>] (of_find_node_by_phandle+0x70/0x88) [ 3.007079] [<c0934f4c>] (of_find_node_by_phandle) from [<c09350ac>] (__of_parse_phandle_with_args+0x148/0x224) [ 3.017645] [<c09350ac>] (__of_parse_phandle_with_args) from [<c09351b0>] (of_parse_phandle+0x28/0x50) [ 3.027392] [<c09351b0>] (of_parse_phandle) from [<c0975c18>] (extcon_get_edev_by_phandle+0x2c/0xec) [ 3.036957] [<c0975c18>] (extcon_get_edev_by_phandle) from [<c0850be0>] (dwc3_omap_probe+0x25c/0x3fc) [ 3.046609] [<c0850be0>] (dwc3_omap_probe) from [<c070108c>] (platform_drv_probe+0x50/0xb0) [ 3.055355] [<c070108c>] (platform_drv_probe) from [<c06ff8d4>] (driver_probe_device+0x208/0x2b4) [ 3.064642] [<c06ff8d4>] (driver_probe_device) from [<c06fdcf4>] (bus_for_each_drv+0x60/0x94) [ 3.073567] [<c06fdcf4>] (bus_for_each_drv) from [<c06ff5ec>] (__device_attach+0xb0/0x114) [ 3.082216] [<c06ff5ec>] (__device_attach) from [<c06fead0>] (bus_probe_device+0x84/0x8c) [ 3.090774] [<c06fead0>] (bus_probe_device) from [<c06fef5c>] (deferred_probe_work_func+0x68/0x94) [ 3.100154] [<c06fef5c>] (deferred_probe_work_func) from [<c03489dc>] (process_one_work+0x1d4/0x3e0) [ 3.109719] [<c03489dc>] (process_one_work) from [<c0348c34>] (worker_thread+0x4c/0x55c) [ 3.118189] [<c0348c34>] (worker_thread) from [<c034db14>] (kthread+0xd4/0xec) [ 3.125749] [<c034db14>] (kthread) from [<c0307998>] (ret_from_fork+0x14/0x3c) [ 3.133308] Code: e7973106 e3530000 128d2004 15832004 (e7875106) [ 3.139682] ---[ end trace cb88537fdc8fa203 ]--- [ 3.144512] Kernel panic - not syncing: Fatal exception in interrupt [ 3.151165] ---[ end Kernel panic - not syncing: Fatal exception in interrupt
[PYBOOT] [omap5uevm 00:55]: got exception: panic ~$off
[PYBOOT] [omap5uevm 00:57]: Done. Board seaboard-arm-multi_v7_defconfig failure log: -------------------------------------------------
[ 1.657098] vdd_ldo7,avdd_hdmi,vdd_fuse: supplied by vdd_sm2,vin_ldo* [ 1.667609] utmi_phy_clk_enable: timeout waiting for phy to stabilize [ 1.674085] tegra-ehci c5000000.usb: EHCI Host Controller [ 1.679507] tegra-ehci c5000000.usb: new USB bus registered, assigned bus number 3 [ 1.687979] tegra-ehci c5000000.usb: irq 287, io mem 0xc5000000 [ 1.699881] mmc2: switch to bus width 8 failed [ 1.704433] tegra-ehci c5000000.usb: USB 2.0 started, EHCI 1.00 [ 1.711065] mmc2: switch to bus width 4 failed [ 1.715575] mmc2: new high speed MMC card at address 0001 [ 1.715916] hub 3-0:1.0: USB hub found [ 1.715969] hub 3-0:1.0: 1 port detected [ 1.730807] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 1.737445] [drm] No driver support for vblank timestamp query. [ 1.743490] mmcblk2: mmc2:0001 MMC08G 7.46 GiB [ 1.748473] mmcblk2boot0: mmc2:0001 MMC08G partition 1 512 KiB [ 1.754619] mmcblk2boot1: mmc2:0001 MMC08G partition 2 512 KiB [ 1.761849] mmcblk2: p3 [ 1.772880] mmc0: queuing unknown CIS tuple 0x80 (50 bytes) [ 1.786711] mmc0: queuing unknown CIS tuple 0x80 (7 bytes) [ 1.795109] mmc0: queuing unknown CIS tuple 0x80 (7 bytes) [ 1.802447] mmc0: queuing unknown CIS tuple 0x80 (19 bytes) [ 1.821581] mmc0: queuing unknown CIS tuple 0x02 (1 bytes) [ 1.826025] mmc0: new SDIO card at address 0001 [ 1.867083] Console: switching to colour frame buffer device 170x48 [ 1.911255] drm drm: fb0: frame buffer device [ 1.928578] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 1.935359] input: gpio-keys as /devices/soc0/gpio-keys/input/input2 [ 1.964374] tps6586x-rtc tps6586x-rtc: setting system clock to 2009-01-01 00:00:00 UTC (1230768000) [ 1.978696] vdd_1v5: disabling [ 1.981751] vdd_1v2: disabling [ 2.573002] asix 2-1:1.0 eth0: register 'asix' at usb-c5008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, c0:c1:c0:13:08:60 [ 2.584452] Waiting for root device /dev/mmcblk0p3... [ 58.026280] random: nonblocking pool is initialized
[PYBOOT] [seaboard 02:02]: Timed out waiting for "<type 'str'>":
[PYBOOT] [seaboard 02:03]: got exception: timeout ~$off
[PYBOOT] [seaboard 02:05]: Done. Board seaboard-arm-multi_v7_nosmp_defconfig failure log: -------------------------------------------------
[ 1.617618] vdd_ldo8,avdd_hdmi_pll: supplied by vdd_sm2,vin_ldo* [ 1.623947] vdd_ldo7,avdd_hdmi,vdd_fuse: supplied by vdd_sm2,vin_ldo* [ 1.633881] utmi_phy_clk_enable: timeout waiting for phy to stabilize [ 1.640336] tegra-ehci c5000000.usb: EHCI Host Controller [ 1.645749] tegra-ehci c5000000.usb: new USB bus registered, assigned bus number 3 [ 1.653504] tegra-ehci c5000000.usb: irq 287, io mem 0xc5000000 [ 1.669164] tegra-ehci c5000000.usb: USB 2.0 started, EHCI 1.00 [ 1.675738] hub 3-0:1.0: USB hub found [ 1.679576] hub 3-0:1.0: 1 port detected [ 1.690379] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 1.697005] [drm] No driver support for vblank timestamp query. [ 1.703863] mmc2: switch to bus width 8 failed [ 1.708575] mmc2: switch to bus width 4 failed [ 1.713048] mmc2: new high speed MMC card at address 0001 [ 1.719222] mmcblk2: mmc2:0001 MMC08G 7.46 GiB [ 1.732107] mmcblk2boot0: mmc2:0001 MMC08G partition 1 512 KiB [ 1.738914] mmcblk2boot1: mmc2:0001 MMC08G partition 2 512 KiB [ 1.740195] mmcblk2: p3 [ 1.755311] mmc0: queuing unknown CIS tuple 0x80 (50 bytes) [ 1.762956] mmc0: queuing unknown CIS tuple 0x80 (7 bytes) [ 1.765711] mmc0: queuing unknown CIS tuple 0x80 (7 bytes) [ 1.772728] mmc0: queuing unknown CIS tuple 0x80 (19 bytes) [ 1.787882] Console: switching to colour frame buffer device 170x48 [ 1.839018] drm drm: fb0: frame buffer device [ 1.843496] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 1.849992] input: gpio-keys as /devices/soc0/gpio-keys/input/input2 [ 1.856912] tps6586x-rtc tps6586x-rtc: setting system clock to 2009-01-01 00:00:00 UTC (1230768000) [ 1.868827] vdd_1v5: disabling [ 1.871896] vdd_1v2: disabling [ 1.888212] mmc0: queuing unknown CIS tuple 0x02 (1 bytes) [ 1.897160] mmc0: new SDIO card at address 0001 [ 2.567408] asix 2-1:1.0 eth0: register 'asix' at usb-c5008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, c0:c1:c0:13:08:60 [ 2.578285] Waiting for root device /dev/mmcblk0p3...
[PYBOOT] [seaboard 01:48]: Timed out waiting for "<type 'str'>":
[PYBOOT] [seaboard 01:49]: got exception: timeout ~$off
[PYBOOT] [seaboard 01:51]: Done. Board seaboard-arm-tegra_defconfig failure log: -------------------------------------------------
[ 1.660053] Bluetooth: RFCOMM ver 1.11 [ 1.663878] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 1.669209] Bluetooth: BNEP socket layer initialized [ 1.674199] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 1.680143] Bluetooth: HIDP socket layer initialized [ 1.685728] Key type dns_resolver registered [ 1.691209] Registering SWP/SWPB emulation handler [ 1.706934] tegra-dc 54200000.dc: failed to probe RGB output: -517 [ 1.713716] VDDIO_HDMI: supplied by vdd_5v0 [ 1.718173] vdd_sys: supplied by vdd_5v0 [ 1.722216] vdd_sm2,vin_ldo*: supplied by vdd_sys [ 1.727172] vdd_ldo8,avdd_hdmi_pll: supplied by vdd_sm2,vin_ldo* [ 1.733764] vdd_ldo7,avdd_hdmi,vdd_fuse: supplied by vdd_sm2,vin_ldo* [ 1.744269] utmi_phy_clk_enable: timeout waiting for phy to stabilize [ 1.750727] tegra-ehci c5000000.usb: EHCI Host Controller [ 1.756788] tegra-ehci c5000000.usb: new USB bus registered, assigned bus number 3 [ 1.764778] tegra-ehci c5000000.usb: irq 287, io mem 0xc5000000 [ 1.781443] tegra-ehci c5000000.usb: USB 2.0 started, EHCI 1.00 [ 1.789832] hub 3-0:1.0: USB hub found [ 1.793640] hub 3-0:1.0: 1 port detected [ 1.805076] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 1.811763] [drm] No driver support for vblank timestamp query. [ 1.878166] Console: switching to colour frame buffer device 170x48 [ 1.898592] drm drm: fb0: frame buffer device [ 1.931432] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 1.938699] input: gpio-keys as /devices/soc0/gpio-keys/input/input4 [ 1.946404] tps6586x-rtc tps6586x-rtc: setting system clock to 2009-01-01 00:00:00 UTC (1230768000) [ 1.966429] vdd_1v5: disabling [ 1.969492] vdd_1v2: disabling [ 1.972776] ALSA device list: [ 1.975831] #0: NVIDIA Tegra Seaboard [ 2.322339] asix 2-1:1.0 eth0: register 'asix' at usb-c5008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, c0:c1:c0:13:08:60 [ 2.333614] Waiting for root device /dev/mmcblk0p3...
[PYBOOT] [seaboard 01:47]: Timed out waiting for "<type 'str'>":
[PYBOOT] [seaboard 01:48]: got exception: timeout ~$off
[PYBOOT] [seaboard 01:49]: Done. Board snow-arm-multi_v7_nosmp_defconfig failure log: -------------------------------------------------
[....] Waiting for /dev to be fully populated...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [....] Activating swap...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [ 3.181623] EXT4-fs (mmcblk0p3): warning: mounting fs with errors, running e2fsck is recommended [ 3.189963] EXT4-fs (mmcblk0p3): re-mounted. Opts: (null) [....] Cleaning up temporary files... /tmp[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0c. [....] Activating lvm and md swap...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [....] Checking file systems...fsck from util-linux 2.20.1 [?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [....] Mounting local filesystems...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [....] Activating swapfile swap...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [....] Cleaning up temporary files...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0c. [....] Setting kernel variables ...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [ 4.227005] random: dd urandom read with 58 bits of entropy available [....] Configuring network interfaces...Internet Systems Consortium DHCP Client 4.2.2 Copyright 2004-2011 Internet Systems Consortium. All rights reserved. For info, please visit https://www.isc.org/software/dhcp/
Cannot find device "eth0" Bind socket to interface: No such device Failed to bring up eth0. [?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [....] Cleaning up temporary files...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0c. INIT: Entering runlevel: 2 [[36minfo[39;49m] Using makefile-style concurrent boot in runlevel 2. [....] Starting enhanced syslogd: rsyslogd[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0c. [....] Starting web server: apache2apache2: Could not reliably determine the server's fully qualified domain name, using 127.0.0.1 for ServerName [?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0c. [....] Starting periodic command scheduler: cron[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0c. [....] Starting system message bus: dbus[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0c. [....] Loading cpufreq kernel modules...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone (none). [....] CPUFreq Utilities: Setting ondemand CPUFreq governor...CPU0...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [....] Starting OpenBSD Secure Shell server: sshd[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0c.
[PYBOOT] [snow 03:10]: Timed out waiting for "<type 'str'>":
[PYBOOT] [snow 03:11]: got exception: timeout ~$off
[PYBOOT] [snow 03:13]: Done. Board snowball-arm-multi_v7_nosmp_defconfig failure log: -------------------------------------------------
[ 1.897918] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.905426] ledtrig-cpu: registered to indicate activity on CPUs [ 1.911651] usbcore: registered new interface driver usbhid [ 1.917236] usbhid: USB HID core driver [ 1.924468] NET: Registered protocol family 10 [ 1.979797] sit: IPv6 over IPv4 tunneling driver [ 1.984954] NET: Registered protocol family 17 [ 1.989410] can: controller area network core (rev 20120528 abi 9) [ 1.995635] NET: Registered protocol family 29 [ 2.000091] can: raw protocol (rev 20120528) [ 2.004364] can: broadcast manager protocol (rev 20120528 t) [ 2.010040] can: netlink gateway (rev 20130117) max_hops=1 [ 2.015991] Key type dns_resolver registered [ 2.020416] ThumbEE CPU extension supported. [ 2.074768] input: gpio_keys as /devices/soc0/gpio_keys/input/input0 [ 2.089447] rtc-pl031 80154000.rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800) [ 2.098510] thermal cooling_device0: thermal-cpufreq-0 bind to 0: 0-succeed [ 2.105529] thermal cooling_device0: thermal-cpufreq-0 bind to 1: 0-succeed [ 2.112487] thermal cooling_device0: thermal-cpufreq-0 bind to 2: 0-succeed [ 2.119476] db8500-cpufreq-cooling soc:cpufreq-cooling: Cooling device registered: thermal-cpufreq-0 [ 2.131164] db8500-esram12: disabling [ 2.178924] db8500-esram34: disabling [ 2.200683] V-CSI/DSI: disabling [ 2.208923] mmci-reg: disabling [ 2.212524] uart-pl011 80007000.uart: DMA channel TX dma0chan20 [ 2.218475] uart-pl011 80007000.uart: DMA channel RX dma0chan21 [ 2.239654] Waiting for root device /dev/mmcblk0p4... [ 3.033813] mmc3: new high speed MMC card at address 0001 [ 3.049621] mmcblk3: mmc3:0001 3.53 GiB [ 3.053802] mmcblk3boot0: mmc3:0001 partition 1 2.00 MiB [ 3.069305] mmcblk3boot1: mmc3:0001 partition 2 2.00 MiB [ 3.074829] mmcblk3rpmb: mmc3:0001 partition 3 128 KiB [ 3.090637] mmcblk3: p1 p2 p3 p4
[PYBOOT] [snowball 01:55]: Timed out waiting for "<type 'str'>":
[PYBOOT] [snowball 01:56]: got exception: timeout ~$off
[PYBOOT] [snowball 01:57]: Done. Board snowball-arm-u8500_defconfig failure log: -------------------------------------------------
[ 2.607666] ux500-msp-i2s ux500-msp-i2s.1: Failed to get DMA channel capabilities, falling back to period counting: -6 [ 2.618408] snd-soc-mop500 snd-soc-mop500.0: ab8500-codec-dai.0 <-> ux500-msp-i2s.1 mapping ok [ 2.628356] ux500-msp-i2s ux500-msp-i2s.3: Failed to get DMA channel capabilities, falling back to period counting: -6 [ 2.639068] snd-soc-mop500 snd-soc-mop500.0: ab8500-codec-dai.1 <-> ux500-msp-i2s.3 mapping ok [ 2.661956] NET: Registered protocol family 10 [ 2.667236] sit: IPv6 over IPv4 tunneling driver [ 2.672668] NET: Registered protocol family 17 [ 2.677154] NET: Registered protocol family 35 [ 2.681701] NET: Registered protocol family 37 [ 2.686279] Registering SWP/SWPB emulation handler [ 2.692504] coresight-etm3x 801ae000.ptm: PTM 1.0 initialized [ 2.698638] coresight-etm3x 801af000.ptm: PTM 1.0 initialized [ 2.705322] input: gpio_keys as /devices/soc0/gpio_keys/input/input1 [ 2.712524] ab8500-rtc ab8500-rtc.0: setting system clock to 2000-04-16 20:04:30 UTC (955915470) [ 2.721801] thermal cooling_device0: thermal-cpufreq-0 bind to 0: 0-succeed [ 2.728790] thermal cooling_device0: thermal-cpufreq-0 bind to 1: 0-succeed [ 2.735809] thermal cooling_device0: thermal-cpufreq-0 bind to 2: 0-succeed [ 2.742797] db8500-cpufreq-cooling soc:cpufreq-cooling: Cooling device registered: thermal-cpufreq-0 [ 2.756256] db8500-esram12: disabling [ 2.760040] db8500-esram34: disabling [ 2.763946] V-CSI/DSI: disabling [ 2.767181] mmci-reg: disabling [ 2.770507] ALSA device list: [ 2.773468] #0: MOP500-card [ 2.776794] uart-pl011 80007000.uart: DMA channel TX dma0chan24 [ 2.782775] uart-pl011 80007000.uart: DMA channel RX dma0chan25 [ 2.788970] Waiting for root device /dev/mmcblk0p4... cu: Got hangup signal Connected. cu: waitpid: No child processes Connected.
Disconnected.
[PYBOOT] [snowball 01:53]: Timed out waiting for "<type 'str'>":
[PYBOOT] [snowball 01:54]: got exception: timeout ~$off
[PYBOOT] [snowball 01:55]: Done. Board wandboard-arm-imx_v6_v7_defconfig failure log: -------------------------------------------------
[ 20.078200] mmcblk0: error -110 sending status command, retrying [ 20.086627] mmcblk0: error -110 sending status command, aborting [ 20.097642] mmcblk0: error -110 sending status command, retrying [ 20.106081] mmcblk0: error -110 sending status command, retrying [ 20.114512] mmcblk0: error -110 sending status command, aborting INIT: cannot execute "/sbin/getty" INIT: INIT: cannot execute "/sbin/getty"INIT: cannot execute "/sbin/getty" INIT: cannot execute "/sbin/getty" cannot execute "/sbin/getty"
INIT: Id "2" respawning too fast: disabled for 5 minutes INIT: Id "6" respawning too fast: disabled for 5 minutes [ 20.250629] mmcblk0: error -110 sending status command, retrying [ 20.259096] mmcblk0: error -110 sending status command, retrying [ 20.267552] mmcblk0: error -110 sending status command, aborting [ 20.278600] mmcblk0: error -110 sending status command, retrying [ 20.287034] mmcblk0: error -110 sending status command, retrying [ 20.295473] mmcblk0: error -110 sending status command, aborting [ 20.306500] mmcblk0: error -110 sending status command, retrying [ 20.314931] mmcblk0: error -110 sending status command, retrying [ 20.323362] mmcblk0: error -110 sending status command, aborting INIT: INIT: INIT: cannot execute "/sbin/getty"cannot execute "/sbin/getty"cannot execute "/sbin/getty[ 20.339403] mmcblk0: error -110 sending status command, retrying "
INIT: Id "5" respawnin[ 20.348245] mmcblk0: error -110 sending status command, retrying g too fast: disabled for 5 minute[ 20.357126] mmcblk0: error -110 sending status command, aborting s INIT: Id "S1" respawning too fast: disabled for 5 minutes INIT: cannot execute "/sbin/getty" INIT: Id "1" respawning too fast: disabled for 5 minutes INIT: no more processes left in this runlevel [ 51.375151] random: nonblocking pool is initialized
[PYBOOT] [wandboard 03:00]: Timed out waiting for "<type 'str'>":
[PYBOOT] [wandboard 03:01]: got exception: timeout ~$off
[PYBOOT] [wandboard 03:02]: Done.
kernel-build-reports@lists.linaro.org