Automated DT boot report for various ARM defconfigs.
Tree/Branch: arm-soc Git describe: v3.13-rc5-1111-gc954e78 Failed boot tests (console logs at the end) =========================================== omap4-panda-es: FAIL: multi_v7_defconfig
Full Report ===========
omap2plus_defconfig ------------------- am335x-boneblack PASS: 0 min 24.8 sec omap3-beagle-xm PASS: 0 min 59.8 sec am335x-bone PASS: 0 min 26.6 sec omap4-panda PASS: 1 min 10.3 sec omap4-panda-es PASS: 1 min 9.5 sec omap3-tobi,3730storm PASS: 0 min 21.1 sec omap3-tobi,3530overo PASS: 0 min 21.6 sec
tegra_defconfig --------------- tegra30-beaver PASS: 0 min 17.0 sec
imx_v6_v7_defconfig ------------------- imx6dl-wandboard,wand-dual PASS: 0 min 17.0 sec imx6dl-wandboard,wand-solo PASS: 0 min 18.4 sec imx6q-wandboard PASS: 0 min 16.8 sec
sunxi_defconfig --------------- sun7i-a20-cubieboard2 PASS: 0 min 12.1 sec
mvebu_defconfig --------------- armada-xp-openblocks-ax3-4 PASS: 0 min 22.0 sec armada-370-mirabox PASS: 0 min 20.2 sec
exynos_defconfig ---------------- exynos5250-arndale PASS: 0 min 28.7 sec
multi_v7_defconfig ------------------ ste-snowball PASS: 1 min 16.8 sec tegra30-beaver PASS: 0 min 24.1 sec am335x-boneblack PASS: 0 min 22.6 sec omap3-beagle-xm PASS: 0 min 47.6 sec sun7i-a20-cubieboard2 PASS: 0 min 13.4 sec armada-370-mirabox PASS: 0 min 21.4 sec omap4-panda PASS: 0 min 51.8 sec omap4-panda-es FAIL: 1 min 47.8 sec armada-xp-openblocks-ax3-4 PASS: 0 min 24.0 sec imx6dl-wandboard,wand-solo PASS: 0 min 17.3 sec am335x-bone PASS: 0 min 24.3 sec imx6q-wandboard PASS: 0 min 16.3 sec omap3-tobi,3730storm PASS: 0 min 22.8 sec imx6dl-wandboard,wand-dual PASS: 0 min 17.5 sec omap3-tobi,3530overo PASS: 0 min 20.7 sec
u8500_defconfig --------------- ste-snowball PASS: 0 min 31.4 sec
sama5_defconfig --------------- sama5d35ek PASS: 0 min 17.4 sec
Console logs for failures =========================
multi_v7_defconfig ------------------
omap4-panda-es: FAIL: last 24 lines of boot log: ------------------------------------------------
[ 1.624053] Registering SWP/SWPB emulation handler [ 1.629943] vwl1271: 1800 mV [ 1.636962] Skipping twl internal clock init and using bootloader value (unknown osc rate) [ 1.646331] twl 0-0048: PIH (irq 39) nested IRQs [ 1.652618] twl_rtc rtc.11: Enabling TWL-RTC [ 1.659362] twl_rtc rtc.11: rtc core: registered rtc.11 as rtc0 [ 1.666229] VAUX1_6030: 1000 <--> 3000 mV at 2800 mV [ 1.672271] VAUX2_6030: 1200 <--> 2800 mV at 1800 mV [ 1.678283] VAUX3_6030: 1000 <--> 3000 mV at 1200 mV [ 1.684265] VMMC: 1200 <--> 3000 mV at 3000 mV [ 1.689727] VPP: 1800 <--> 2500 mV at 1900 mV [ 1.695037] VUSIM: 1200 <--> 2900 mV at 1800 mV [ 1.700042] VDAC: 1800 mV [ 1.703613] VANA: 2100 mV [ 1.707061] VCXIO: 1800 mV [ 1.710113] VUSB: 3300 mV [ 1.713836] V1V8: 1800 mV [ 1.717315] V2V1: 2100 mV [ 1.724548] omap_i2c 48070000.i2c: bus 0 rev0.11 at 400 kHz [ 1.816375] usb 1-1: new high-speed USB device number 2 using ehci-omap ~$off # PYBOOT: Exception: kernel: ERROR: failed to boot: <class 'pexpect.TIMEOUT'> # PYBOOT: Time: 107.76 seconds. # PYBOOT: Result: FAIL
On 01/14/2014 12:20 PM, Kevin's boot bot wrote:
Automated DT boot report for various ARM defconfigs.
Tree/Branch: arm-soc Git describe: v3.13-rc5-1111-gc954e78 Failed boot tests (console logs at the end) =========================================== omap4-panda-es: FAIL: multi_v7_defconfig
This one has been failing for a bit, but I finally bisected it.
This is a known issue where cpuidle on OMAP4460 is broken in mainline. There has been a fix posted[1], but it needs some work before being merged. It was exposed when CPUidle was enabled by default in multi_v7_defconfig, which explains why the 4460 panda-es boots fine with omap2plus_defconfig, but not omap2plus_defconfig.
Kevin
* Kevin Hilman khilman@linaro.org [140114 13:25]:
On 01/14/2014 12:20 PM, Kevin's boot bot wrote:
Automated DT boot report for various ARM defconfigs.
Tree/Branch: arm-soc Git describe: v3.13-rc5-1111-gc954e78 Failed boot tests (console logs at the end) =========================================== omap4-panda-es: FAIL: multi_v7_defconfig
This one has been failing for a bit, but I finally bisected it.
This is a known issue where cpuidle on OMAP4460 is broken in mainline. There has been a fix posted[1], but it needs some work before being merged. It was exposed when CPUidle was enabled by default in multi_v7_defconfig, which explains why the 4460 panda-es boots fine with omap2plus_defconfig, but not omap2plus_defconfig.
OK good to hear. I tried tracking this down this morning, but my 4430 sdp booted just fine with linux next and multi_v7_defconfig. So it seems to be 4460 specific like you mentioned.
Regards,
Tony
kernel-build-reports@lists.linaro.org