queue boot: 17 pass, 2 fail (v3.10.32-37-gdbbec17) - Kernel-build-reports

28 Feb 2014


      Automated DT boot report for various ARM defconfigs.
Tree/Branch: queue
Git describe: v3.10.32-37-gdbbec17
Failed boot tests (console logs at the end)
===========================================
  imx6dl-wandboard,wand-solo:     FAIL:    imx_v6_v7_defconfig
                   da850-evm:     FAIL:    davinci_all_defconfig
Full Report
===========
da8xx_omapl_defconfig
---------------------
                   da850-evm     PASS:    0 min 15.0 sec
omap2plus_defconfig
-------------------
               legacy,3730xm     PASS:    0 min 50.2 sec
             omap3-beagle-xm     PASS:    0 min 54.3 sec
           legacy,3530beagle     PASS:    0 min 34.0 sec
                 omap4-panda     PASS:    1 min  3.8 sec
                  omap3-tobi     PASS:    0 min 33.7 sec
                 am335x-bone     PASS:    0 min 26.7 sec
              omap4-panda-es     PASS:    1 min  3.3 sec
            legacy,3730storm     PASS:    0 min 23.4 sec
            legacy,3530overo     PASS:    0 min 24.0 sec
tegra_defconfig
---------------
              tegra30-beaver     PASS:    0 min 17.1 sec
imx_v6_v7_defconfig
-------------------
  imx6dl-wandboard,wand-dual     PASS:    0 min 17.4 sec
  imx6dl-wandboard,wand-solo     FAIL:    0 min 31.4 sec
mvebu_defconfig
---------------
  armada-xp-openblocks-ax3-4     PASS:    0 min 21.5 sec
          armada-370-mirabox     PASS:    0 min 19.6 sec
exynos_defconfig
----------------
          exynos5250-arndale     PASS:    1 min  0.8 sec
sama5_defconfig
---------------
                  sama5d35ek     PASS:    0 min 16.3 sec
davinci_all_defconfig
---------------------
             legacy,dm365evm     PASS:    0 min 16.5 sec
                   da850-evm     FAIL:    0 min 20.8 sec
Console logs for failures
=========================
imx_v6_v7_defconfig
-------------------
imx6dl-wandboard,wand-solo: FAIL: last 80 lines of boot log:
    ------------------------------------------------------------
Connected to wand-solo console [channel connected] (~$quit to exit)
(user:khilman) is already connected
~$hardreset
Command(wand-solo console)> hardreset
(user:khilman) Reboot wand-solo
Reboot: wand-solo ; phidget 2 2 :  off, sleep, on
U-Boot 2013.04-00012-g0b44183-dirty (May 15 2013 - 16:16:11)
CPU:   Freescale i.MX6SOLO rev1.1 at 792 MHz
Reset cause: POR
Board: Wandboard
DRAM:  512 MiB
WARNING: Caches not enabled
MMC:   FSL_SDHC: 0
*** Warning - bad CRC, using default env  0 
=> ~$off
# PYBOOT: Exception: ERROR: Could not break into autoboot.
# PYBOOT: Time: 31.38 seconds.
# PYBOOT: Result: FAIL
davinci_all_defconfig
---------------------
da850-evm: FAIL: last 80 lines of boot log:
    -------------------------------------------
Err:   serial
SF: Detected M25P64 with page size 256 Bytes, erase size 64 KiB, total 8 MiB
Net:   DaVinci-EMAC
Hit any key to stop autoboot:  
3  0 
U-Boot > 
U-Boot > version
version
U-Boot 2014.01-dirty (Feb 27 2014 - 15:12:48)
arm-linux-gnueabi-gcc (Ubuntu/Linaro 4.7.3-1ubuntu1) 4.7.3
GNU ld (GNU Binutils for Ubuntu) 2.23.52.20130913
U-Boot > setenv bootargs console=ttyS2,115200n8 debug earlyprintk
setenv bootargs console=ttyS2,115200n8 debug earlyprintk
U-Boot > if test -n ${initenv}; then run initenv; fi
if test -n ${initenv}; then run initenv; fi
U-Boot > if test -n ${preboot}; then run preboot; fi
if test -n ${preboot}; then run preboot; fi
U-Boot >setenv autoload no; setenv autoboot no
 setenv autoload no; setenv autoboot no
U-Boot > dhcp
dhcp
BOOTP broadcast 1
DHCP client bound to address 192.168.1.194
U-Boot >setenv serverip 192.168.1.2
 setenv serverip 192.168.1.2
U-Boot > if test -n ${netargs}; then run netargs; fi
if test -n ${netargs}; then run netargs; fi
U-Boot > tftp 0xc0800000 192.168.1.2:tmp/da850evm-FGQds2/zImage
tftp 0xc0800000 192.168.1.2:tmp/da850evm-FGQds2/zImage
Using DaVinci-EMAC device
TFTP from server 192.168.1.2; our IP address is 192.168.1.194
Filename 'tmp/da850evm-FGQds2/zImage'.
Load address: 0xc0800000
Loading: *#################################################################
     #################################################################
     ########
     1.7 MiB/s
done
Bytes transferred = 2017232 (1ec7d0 hex)
U-Boot > tftp 0xc0c00000 192.168.1.2:buildroot.cpio.gz.uboot
tftp 0xc0c00000 192.168.1.2:buildroot.cpio.gz.uboot
Using DaVinci-EMAC device
TFTP from server 192.168.1.2; our IP address is 192.168.1.194
Filename 'buildroot.cpio.gz.uboot'.
Load address: 0xc0c00000
Loading: *############################################
     1.7 MiB/s
done
Bytes transferred = 642602 (9ce2a hex)
U-Boot > tftp 0xc07f0000 192.168.1.2:tmp/da850evm-FGQds2/da850-evm.dtb
tftp 0xc07f0000 192.168.1.2:tmp/da850evm-FGQds2/da850-evm.dtb
Using DaVinci-EMAC device
TFTP from server 192.168.1.2; our IP address is 192.168.1.194
Filename 'tmp/da850evm-FGQds2/da850-evm.dtb'.
Load address: 0xc07f0000
Loading: *#
     1.1 MiB/s
done
Bytes transferred = 5972 (1754 hex)
U-Boot >printenv bootargs
 printenv bootargs
bootargs=console=ttyS2,115200n8 debug earlyprintk
U-Boot > bootz 0xc0800000 0xc0c00000 0xc07f0000
bootz 0xc0800000 0xc0c00000 0xc07f0000
Kernel image @ 0xc0800000 [ 0x000000 - 0x1ec7d0 ]
## Loading init Ramdisk from Legacy Image at c0c00000 ...
   Image Name:   
   Image Type:   ARM Linux RAMDisk Image (uncompressed)
   Data Size:    642538 Bytes = 627.5 KiB
   Load Address: 00000000
   Entry Point:  00000000
   Verifying Checksum ... OK
Starting kernel ...
~$off
# PYBOOT: Exception: kernel: ERROR: did not start booting.
# PYBOOT: Time: 20.82 seconds.
# PYBOOT: Result: FAIL