mainline boot: 16 passed 17 failed (mainline/v3.14-11940-ge4f3054) - Kernel-build-reports

8 Apr 2014


      Failed boards:
bbb          multi_v7_defconfig            :	FAILED	3:05.85
    beaver       multi_v7_defconfig            :	FAILED	2:57.94
    capri        multi_v7_defconfig            :	FAILED	2:57.42
    cubie        multi_v7_defconfig            :	FAILED	3:00.39
    cubie2       sunxi_defconfig               :	FAILED	1:21.09
    cubie2       multi_v7_defconfig            :	FAILED	3:04.32
    cubie2       multi_lpae_defconfig          :	FAILED	2:55.47
    dalmore      multi_v7_defconfig            :	FAILED	3:09.20
    dalmore      multi_lpae_defconfig          :	FAILED	3:01.70
    hummingboard multi_v7_defconfig            :	FAILED	1:05.20
    omap5uevm    multi_v7_defconfig            :	FAILED	3:50.28
    omap5uevm    multi_lpae_defconfig          :	FAILED	3:49.83
    panda        multi_v7_defconfig            :	FAILED	1:35.17
    seaboard     multi_v7_defconfig            :	FAILED	2:59.10
    snowball     multi_v7_defconfig            :	FAILED	1:11.84
    trimslice    multi_v7_defconfig            :	FAILED	3:09.93
    wandboard    multi_v7_defconfig            :	FAILED	1:07.27
Successful boards:
apc          vt8500_v6_v7_defconfig        :	passed	1:13.48
    arndale      exynos_defconfig              :	passed	1:05.94
    bbb          omap2plus_defconfig           :	passed	1:38.73
    beaver       tegra_defconfig               :	passed	0:54.44
    capri        bcm_defconfig                 :	passed	0:42.61
    cubie        sunxi_defconfig               :	passed	0:56.63
    dalmore      tegra_defconfig               :	passed	1:21.77
    hummingboard imx_v6_v7_defconfig           :	passed	1:16.74
    omap5uevm    omap2plus_defconfig           :	warnings	1:01.54
    panda        omap2plus_defconfig           :	passed	1:17.05
    sama5        sama5_defconfig               :	passed	1:49.40
    seaboard     tegra_defconfig               :	passed	1:57.01
    snow         exynos_defconfig              :	passed	1:32.22
    snowball     u8500_defconfig               :	passed	3:15.62
    trimslice    tegra_defconfig               :	passed	0:58.86
    wandboard    imx_v6_v7_defconfig           :	passed	0:59.95
Offline boards:
Board legend is available at http://arm-soc.lixom.net/boards.html
Last entries of failed logs below:
========================================================================
Board bbb-multi_v7_defconfig failure log:
    -------------------------------------------------
[    1.237166] gspca_main: v2.14.0 registered
[    1.243491] sdhci: Secure Digital Host Controller Interface driver
[    1.250024] sdhci: Copyright(c) Pierre Ossman
[    1.255780] 48060000.mmc supply vmmc_aux not found, using dummy regulator
[    1.297244] 481d8000.mmc supply vmmc_aux not found, using dummy regulator
[    1.337261] sdhci-pltfm: SDHCI platform and OF driver helper
[    1.344115] usbcore: registered new interface driver usbhid
[    1.350016] usbhid: USB HID core driver
[    1.359074] TCP: cubic registered
[    1.362579] NET: Registered protocol family 17
[    1.367649] Key type dns_resolver registered
[    1.373083] ThumbEE CPU extension supported.
[    1.377672] Registering SWP/SWPB emulation handler
[    1.382701] PJ4 iWMMXt coprocessor enabled.
[    1.395088] omap_i2c 44e0b000.i2c: bus 0 rev0.11 at 400 kHz
[    1.449920] mmc1: BKOPS_EN bit is not set
[    1.456578] mmc1: new high speed MMC card at address 0001
[    1.463024] mmcblk0: mmc1:0001 MMC02G 1.78 GiB 
[    1.468043] davinci_mdio 4a101000.mdio: davinci mdio revision 1.6
[    1.474444] davinci_mdio 4a101000.mdio: detected phy mask fffffffe
[    1.481437] mmcblk0boot0: mmc1:0001 MMC02G partition 1 1.00 MiB
[    1.488109] mmcblk0boot1: mmc1:0001 MMC02G partition 2 1.00 MiB
[    1.495485] libphy: 4a101000.mdio: probed
[    1.499819] davinci_mdio 4a101000.mdio: phy[0]: device 4a101000.mdio:00, driver unknown
[    1.509581] Detected MACID = bc:6a:29:7a:42:a8
[    1.515831] /home/build/work/batch/drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
[    1.529960] ALSA device list:
[    1.533094]   No soundcards found.
[    1.538022]  mmcblk0: p1 p2
[    1.543856]  mmcblk0boot1: unknown partition table
[    1.550919]  mmcblk0boot0: unknown partition table
[    1.558080] EXT4-fs (mmcblk0p2): couldn't mount as ext3 due to feature incompatibilities
[    1.567854] EXT4-fs (mmcblk0p2): couldn't mount as ext2 due to feature incompatibilities
[    1.627627] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
[    1.636205] VFS: Mounted root (ext4 filesystem) on device 179:2.
[    1.663029] devtmpfs: mounted
[    1.667205] Freeing unused kernel memory: 556K (c0a6e000 - c0af9000)
[    1.742080] Internal error: Oops - undefined instruction: 0 [#1] SMP ARM
~$off
# PYBOOT: Exception: timeout
========================================================================
Board beaver-multi_v7_defconfig failure log:
    -------------------------------------------------
[    3.660112] pci 0000:00:01.0:   bridge window [io  0x1000-0x1fff]
[    3.666197] pci 0000:00:01.0:   bridge window [mem 0x28000000-0x280fffff 64bit pref]
[    3.673941] pci 0000:00:01.0: nv_msi_ht_cap_quirk didn't locate host bridge
[    3.681035] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[    3.686630] r8169 0000:01:00.0: enabling device (0140 -> 0143)
[    3.692983] r8169 0000:01:00.0 eth0: RTL8168evl/8111evl at 0xf002e000, 02:04:4b:01:60:99, XID 0c900800 IRQ 472
[    3.702978] r8169 0000:01:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[    3.712525] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    3.719153] [drm] No driver support for vblank timestamp query.
[    3.725110] host1x drm: No connectors reported connected with modes
[    3.731366] [drm] Cannot find any crtc or sizes - going 1024x768
[    3.749784] Console: switching to colour frame buffer device 128x48
[    3.761734] host1x drm: fb0:  frame buffer device
[    3.766439] host1x drm: registered panic notifier
[    3.771136] [drm] Initialized tegra 0.0.0 20120330 on minor 0
[    3.777338] platform 7d004000.usb: Driver tegra-ehci requests probe deferral
[    3.784721] platform 7d008000.usb: Driver tegra-ehci requests probe deferral
[    3.796061] tegra-ehci 7d004000.usb: EHCI Host Controller
[    3.801459] tegra-ehci 7d004000.usb: new USB bus registered, assigned bus number 1
[    3.809255] tegra-ehci 7d004000.usb: irq 53, io mem 0x7d004000
[    3.833069] tegra-ehci 7d004000.usb: USB 2.0 started, EHCI 1.00
[    3.839446] hub 1-0:1.0: USB hub found
[    3.843223] hub 1-0:1.0: 1 port detected
[    3.847558] tegra-ehci 7d008000.usb: EHCI Host Controller
[    3.852953] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 2
[    3.860753] tegra-ehci 7d008000.usb: irq 129, io mem 0x7d008000
[    3.883068] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.00
[    3.889366] hub 2-0:1.0: USB hub found
[    3.893143] hub 2-0:1.0: 1 port detected
[    3.901009] tps65910-rtc tps65910-rtc: setting system clock to 2000-01-01 00:00:02 UTC (946684802)
[    3.913756] ALSA device list:
[    3.916722]   #0: NVIDIA Tegra Beaver
[    3.922863] EXT4-fs (mmcblk0p1): couldn't mount as ext3 due to feature incompatibilities
[    3.931785] EXT4-fs (mmcblk0p1): couldn't mount as ext2 due to feature incompatibilities
[    3.946682] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null)
[    3.954809] VFS: Mounted root (ext4 filesystem) readonly on device 179:1.
[    3.980953] devtmpfs: mounted
[    3.984418] Freeing unused kernel memory: 556K (c0a6e000 - c0af9000)
~$off
# PYBOOT: Exception: timeout
========================================================================
Board capri-multi_v7_defconfig failure log:
    -------------------------------------------------
[    0.930000] mmcblk0boot0: mmc0:0001 016G4A partition 1 2.00 MiB
[    0.930000] mmcblk0boot1: mmc0:0001 016G4A partition 2 2.00 MiB
[    0.940000] mmcblk0rpmb: mmc0:0001 016G4A partition 3 256 KiB
[    0.940000] Alternate GPT is invalid, using primary GPT.
[    0.950000]  mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8
[    0.950000]  mmcblk0boot1: unknown partition table
[    0.960000]  mmcblk0boot0: unknown partition table
[    1.010000] EXT4-fs (mmcblk0p8): mounted filesystem with ordered data mode. Opts: (null)
[    1.020000] VFS: Mounted root (ext4 filesystem) readonly on device 179:8.
[    1.020000] devtmpfs: mounted
[    1.030000] Freeing unused kernel memory: 556K (c0a6e000 - c0af9000)
[    1.050000] Internal error: Oops - undefined instruction: 0 [#1] SMP ARM
[    1.050000] Alignment trap: not handling instruction e1923f9f at [<c07d1aec>]
[    1.050000] Unhandled fault: alignment exception (0x001) at 0x20736eae
[    1.050000] Internal error: : 1 [#2] SMP ARM
[    1.050000] Modules linked in:
[    1.050000] CPU: 0 PID: 29042 Comm:  %s
[    1.050000]  Not tainted 3.14.0-11940-ge4f3054 #1
[    1.050000] task: c09ab4a4 ti: ea838000 task.ti: 70737573
[    1.050000] PC is at _raw_spin_lock_irqsave+0x14/0x4c
[    1.050000] LR is at __down_read_trylock+0x14/0x54
[    1.050000] pc : [<c07d1af0>]    lr : [<c027cfb4>]    psr: 40000193
[    1.050000] sp : ea839f38  ip : c0b06390  fp : ea83a020
[    1.050000] r10: 00000028  r9 : 20736eaa  r8 : 0000017c
[    1.050000] r7 : c09ab4a4  r6 : 00000017  r5 : 20736eae  r4 : 20736eaa
[    1.050000] r3 : 00000193  r2 : 20736eae  r1 : 00000000  r0 : 40000193
[    1.050000] Flags: nZcv  IRQs off  FIQs on  Mode SVC_32  ISA ARM  Segment user
[    1.050000] Control: 10c5387d  Table: babf404a  DAC: 00000015
[    1.050000] Process  %s
[    1.050000]  (pid: 29042, stack limit = 0x707377c3)
[    1.050000] Stack: (0xea839f38 to 0x70739573)
[    1.050000] [<c07d1af0>] (_raw_spin_lock_irqsave) from [<c027cfb4>] (__down_read_trylock+0x14/0x54)
[    1.050000] [<c027cfb4>] (__down_read_trylock) from [<c0217cd0>] (do_page_fault+0x78/0x27c)
[    1.050000] [<c0217cd0>] (do_page_fault) from [<c02083d4>] (do_DataAbort+0x38/0x98)
[    1.050000] Code: e10f0000 f10c0080 f592f000 e1923f9f (e2831801) 
[    1.050000] ---[ end trace bb21f344bc6b0dcd ]---
[    1.050000] Alignment trap: not handling instruction e1923f9f at [<c07d1aec>]
[    1.050000] Unhandled fault: alignment exception (0x001) at 0x20736eae
~$off
# PYBOOT: Exception: timeout
========================================================================
Board cubie-multi_v7_defconfig failure log:
    -------------------------------------------------
[    0.968962] usbcore: registered new interface driver usb-storage
[    0.976081] mousedev: PS/2 mouse device common for all mice
[    0.982971] i2c /dev entries driver
[    0.988109] usbcore: registered new interface driver uvcvideo
[    0.993920] USB Video Class driver (1.1.1)
[    0.998012] gspca_main: v2.14.0 registered
[    1.004929] sdhci: Secure Digital Host Controller Interface driver
[    1.011102] sdhci: Copyright(c) Pierre Ossman
[    1.015818] sdhci-pltfm: SDHCI platform and OF driver helper
[    1.021931] usbcore: registered new interface driver usbhid
[    1.027520] usbhid: USB HID core driver
[    1.033952] TCP: cubic registered
[    1.037276] NET: Registered protocol family 17
[    1.041882] Key type dns_resolver registered
[    1.046306] ThumbEE CPU extension supported.
[    1.050590] Registering SWP/SWPB emulation handler
[    1.055392] PJ4 iWMMXt coprocessor enabled.
[    1.060657] ahci-5v: 5000 mV 
[    1.064117] usb1-vbus: 5000 mV 
[    1.067625] usb2-vbus: 5000 mV 
[    1.071298] platform 1c14000.usb: Driver ehci-platform requests probe deferral
[    1.079127] platform 1c1c000.usb: Driver ehci-platform requests probe deferral
[    1.086781] /home/build/work/batch/drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
[    1.100190] platform 1c14000.usb: Driver ehci-platform requests probe deferral
[    1.108073] platform 1c1c000.usb: Driver ehci-platform requests probe deferral
[    3.432872] sun4i-emac 1c0b000.ethernet eth0: Link is Up - 100Mbps/Full - flow control rx/tx
[    3.452861] Sending DHCP requests ., OK
[    3.473301] IP-Config: Got DHCP answer from 172.16.1.1, my address is 172.16.1.173
[    3.481063] IP-Config: Complete:
[    3.484318]      device=eth0, hwaddr=08:00:08:1e:2f:44, ipaddr=172.16.1.173, mask=255.255.255.0, gw=172.16.1.1
[    3.494327]      host=172.16.1.173, domain=lixom.net, nis-domain=(none)
[    3.500933]      bootserver=172.16.1.7, rootserver=172.16.1.7, rootpath=
[    3.507463]      nameserver0=172.16.1.1
[    3.511586] ALSA device list:
[    3.514568]   No soundcards found.
[    3.523412] VFS: Mounted root (nfs filesystem) on device 0:11.
[    3.529673] devtmpfs: mounted
[    3.533261] Freeing unused kernel memory: 556K (c0a6e000 - c0af9000)
~$off
# PYBOOT: Exception: timeout
========================================================================
Board cubie2-multi_lpae_defconfig failure log:
    -------------------------------------------------
[    3.919625] ., OK
[    3.950084] IP-Config: Got DHCP answer from 172.16.1.1, my address is 172.16.1.109
[    3.957895] IP-Config: Complete:
[    3.961170]      device=eth0, hwaddr=08:00:08:1e:2f:64, ipaddr=172.16.1.109, mask=255.255.255.0, gw=172.16.1.1
[    3.971173]      host=172.16.1.109, domain=lixom.net, nis-domain=(none)
[    3.977778]      bootserver=172.16.1.7, rootserver=172.16.1.7, rootpath=
[    3.984308]      nameserver0=172.16.1.1
[    3.988442] ALSA device list:
[    3.991423]   No soundcards found.
[    4.000561] VFS: Mounted root (nfs filesystem) on device 0:11.
[    4.006802] devtmpfs: mounted
[    4.010444] Freeing unused kernel memory: 560K (c0a74000 - c0b00000)
[    4.034148] Internal error: Oops - undefined instruction: 0 [#1] SMP ARM
[    4.040955] Alignment trap: not handling instruction e1923f9f at [<c07d89ac>]
[    4.048082] Unhandled fault: alignment exception (0x221) at 0x20736eae
[    4.054603] Internal error: : 221 [#2] SMP ARM
[    4.059040] Modules linked in:
[    4.062107] CPU: 0 PID: 29042 Comm:  %s
[    4.062107]  Not tainted 3.14.0-11940-ge4f3054 #1
[    4.070630] task: c09b14b0 ti: ea03e000 task.ti: 70737573
[    4.076035] PC is at _raw_spin_lock_irqsave+0x14/0x4c
[    4.081084] LR is at __down_read_trylock+0x14/0x54
[    4.085869] pc : [<c07d89b0>]    lr : [<c027dd08>]    psr: 40000193
[    4.085869] sp : ea03ffb8  ip : c0b0c3e8  fp : ea0400a0
[    4.097327] r10: 00000028  r9 : 20736eaa  r8 : 0000017c
[    4.102544] r7 : c09b14b0  r6 : 00000207  r5 : 20736eae  r4 : 20736eaa
[    4.109061] r3 : 20000193  r2 : 20736eae  r1 : 00000000  r0 : 40000193
[    4.115582] Flags: nZcv  IRQs off  FIQs on  Mode SVC_32  ISA ARM  Segment user
[    4.122793] Control: 30c5387d  Table: 6a3ec500  DAC: fffffffd
[    4.128529] Process  %s
[    4.128529]  (pid: 29042, stack limit = 0x707377c3)
[    4.135829] Stack: (0xea03ffb8 to 0x70739573)
[    4.140199] [<c07d89b0>] (_raw_spin_lock_irqsave) from [<c027dd08>] (__down_read_trylock+0x14/0x54)
[    4.149242] [<c027dd08>] (__down_read_trylock) from [<c0218010>] (do_page_fault+0x78/0x27c)
[    4.157587] Code: e10f0000 f10c0080 f592f000 e1923f9f (e2831801) 
[    4.163674] ---[ end trace 14769bde44fb14c2 ]---
[    4.168288] Alignment trap: not handling instruction e1923f9f at [<c07d89ac>]
[    4.175412] Unhandled fault: alignment exception (0x221) at 0x20736eae
~$off
# PYBOOT: Exception: timeout
========================================================================
Board cubie2-multi_v7_defconfig failure log:
    -------------------------------------------------
[    4.939982] IP-Config: Got DHCP answer from 172.16.1.1, my address is 172.16.1.109
[    4.947823] IP-Config: Complete:
[    4.951101]      device=eth0, hwaddr=08:00:08:1e:2f:64, ipaddr=172.16.1.109, mask=255.255.255.0, gw=172.16.1.1
[    4.961101]      host=172.16.1.109, domain=lixom.net, nis-domain=(none)
[    4.967706]      bootserver=172.16.1.7, rootserver=172.16.1.7, rootpath=
[    4.974235]      nameserver0=172.16.1.1
[    4.978369] ALSA device list:
[    4.981353]   No soundcards found.
[    4.990412] VFS: Mounted root (nfs filesystem) on device 0:11.
[    4.996706] devtmpfs: mounted
[    5.000322] Freeing unused kernel memory: 556K (c0a6e000 - c0af9000)
[    5.024000] Internal error: Oops - undefined instruction: 0 [#1] SMP ARM
[    5.030813] Alignment trap: not handling instruction e1923f9f at [<c07d1aec>]
[    5.037939] Unhandled fault: alignment exception (0x001) at 0x20736eae
[    5.044457] Internal error: : 1 [#2] SMP ARM
[    5.048721] Modules linked in:
[    5.051789] CPU: 0 PID: 29042 Comm:  %s
[    5.051789]  Not tainted 3.14.0-11940-ge4f3054 #1
[    5.060313] task: c09ab4a4 ti: ea03c000 task.ti: 70737573
[    5.065716] PC is at _raw_spin_lock_irqsave+0x14/0x4c
[    5.070765] LR is at __down_read_trylock+0x14/0x54
[    5.075551] pc : [<c07d1af0>]    lr : [<c027cfb4>]    psr: 40000193
[    5.075551] sp : ea03df18  ip : c0b06390  fp : ea03e000
[    5.087010] r10: 00000028  r9 : 20736eaa  r8 : 0000017c
[    5.092227] r7 : c09ab4a4  r6 : 00000017  r5 : 20736eae  r4 : 20736eaa
[    5.098745] r3 : 20000193  r2 : 20736eae  r1 : 00000000  r0 : 40000193
[    5.105264] Flags: nZcv  IRQs off  FIQs on  Mode SVC_32  ISA ARM  Segment user
[    5.112475] Control: 10c5387d  Table: 6a47806a  DAC: 00000015
[    5.118212] Process  %s
[    5.118212]  (pid: 29042, stack limit = 0x707377c3)
[    5.125512] Stack: (0xea03df18 to 0x70739573)
[    5.129881] [<c07d1af0>] (_raw_spin_lock_irqsave) from [<c027cfb4>] (__down_read_trylock+0x14/0x54)
[    5.138925] [<c027cfb4>] (__down_read_trylock) from [<c0217cd0>] (do_page_fault+0x78/0x27c)
[    5.147271] [<c0217cd0>] (do_page_fault) from [<c02083d4>] (do_DataAbort+0x38/0x98)
[    5.154921] Code: e10f0000 f10c0080 f592f000 e1923f9f (e2831801) 
[    5.161009] ---[ end trace 5412ee899eca5701 ]---
[    5.165625] Alignment trap: not handling instruction e1923f9f at [<c07d1aec>]
[    5.172748] Unhandled fault: alignment exception (0x001) at 0x20736eae
~$off
# PYBOOT: Exception: timeout
========================================================================
Board cubie2-sunxi_defconfig failure log:
    -------------------------------------------------
[    0.017727] platform ahci-5v.2: Driver reg-fixed-voltage requests probe deferral
[    0.017753] reg-fixed-voltage usb1-vbus.3: could not find pctldev for node /soc@01c00000/pinctrl@01c20800/usb1_vbus_pin@0, deferring probe
[    0.017765] platform usb1-vbus.3: Driver reg-fixed-voltage requests probe deferral
[    0.017786] reg-fixed-voltage usb2-vbus.4: could not find pctldev for node /soc@01c00000/pinctrl@01c20800/usb2_vbus_pin@0, deferring probe
[    0.017799] platform usb2-vbus.4: Driver reg-fixed-voltage requests probe deferral
[    0.018754] Switched to clocksource arch_sys_counter
[    0.025727] NET: Registered protocol family 2
[    0.026190] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
[    0.026278] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[    0.026399] TCP: Hash tables configured (established 8192 bind 8192)
[    0.026482] TCP: reno registered
[    0.026497] UDP hash table entries: 512 (order: 2, 16384 bytes)
[    0.026553] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[    0.026753] NET: Registered protocol family 1
[    0.027139] RPC: Registered named UNIX socket transport module.
[    0.027153] RPC: Registered udp transport module.
[    0.027159] RPC: Registered tcp transport module.
[    0.027164] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    0.028124] futex hash table entries: 512 (order: 3, 32768 bytes)
[    0.028596] bounce pool size: 64 pages
[    0.036361] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[    0.036378] io scheduler noop registered
[    0.036384] io scheduler deadline registered
[    0.036563] io scheduler cfq registered (default)
[    0.038204] sunxi-pinctrl 1c20800.pinctrl: initialized sunXi PIO driver
[    0.079256] Serial: 8250/16550 driver, 8 ports, IRQ sharing disabled
[    0.081655] console [ttyS0] disabled
[    0.101852] 1c28000.serial: ttyS0 at MMIO 0x1c28000 (irq = 33, base_baud = 1500000) is a U6_16550A
[    0.616914] console [ttyS0] enabled
[    0.621629] mousedev: PS/2 mouse device common for all mice
[    0.627453] i2c /dev entries driver
[    0.632273] sunxi-wdt 1c20c90.watchdog: Watchdog enabled (timeout=16 sec, nowayout=0)
[    0.641262] TCP: cubic registered
[    0.644583] NET: Registered protocol family 17
[    0.649146] Registering SWP/SWPB emulation handler
[    0.654846] ahci-5v: 5000 mV 
[    0.658081] usb1-vbus: 5000 mV 
[    0.661484] usb2-vbus: 5000 mV 
~$off
# PYBOOT: Exception: timeout
========================================================================
Board dalmore-multi_lpae_defconfig failure log:
    -------------------------------------------------
[    2.746255] input: NVIDIA Tegra Dalmore Headphones as /devices/soc0/sound.5/sound/card0/input0
[    2.759240] TCP: cubic registered
[    2.762651] NET: Registered protocol family 17
[    2.767762] Key type dns_resolver registered
[    2.773846] ThumbEE CPU extension supported.
[    2.778169] Registering SWP/SWPB emulation handler
[    2.783031] PJ4 iWMMXt coprocessor enabled.
[    2.794095] dvdd_ts: 1800 mV 
[    2.798799] usb1_vbus: 5000 mV 
[    2.802144] usb1_vbus: supplied by vdd-sys-5v0
[    2.808170] usb2_vbus: 5000 mV 
[    2.811498] usb2_vbus: supplied by vdd-sys-5v0
[    2.817479] vdd_hdmi_5v0: 5000 mV 
[    2.821064] vdd_hdmi_5v0: supplied by vdd-sys-5v0
[    2.830772] vdd_cam_1v8_reg: 1800 mV 
[    2.850705] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    2.857442] [drm] No driver support for vblank timestamp query.
[    2.987260] Console: switching to colour frame buffer device 240x75
[    3.072911] host1x drm: fb0:  frame buffer device
[    3.077721] host1x drm: registered panic notifier
[    3.082617] [drm] Initialized tegra 0.0.0 20120330 on minor 0
[    3.090309] platform 7d008000.usb: Driver tegra-ehci requests probe deferral
[    3.102129] tegra-ehci 7d008000.usb: EHCI Host Controller
[    3.107812] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 1
[    3.118866] tegra-ehci 7d008000.usb: irq 129, io mem 0x7d008000
[    3.142415] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.10
[    3.151778] hub 1-0:1.0: USB hub found
[    3.155941] hub 1-0:1.0: 1 port detected
[    3.165017] input: gpio-keys.3 as /devices/soc0/gpio-keys.3/input/input1
[    3.176077] palmas-rtc rtc.8: setting system clock to 2000-01-01 00:00:01 UTC (946684801)
[    3.218567] ALSA device list:
[    3.221579]   #0: NVIDIA Tegra Dalmore
[    3.229480] EXT4-fs (mmcblk0p1): couldn't mount as ext3 due to feature incompatibilities
[    3.239441] EXT4-fs (mmcblk0p1): couldn't mount as ext2 due to feature incompatibilities
[    3.278862] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null)
[    3.287177] VFS: Mounted root (ext4 filesystem) readonly on device 179:1.
[    3.302164] devtmpfs: mounted
[    3.306958] Freeing unused kernel memory: 560K (c0a74000 - c0b00000)
~$off
# PYBOOT: Exception: timeout
========================================================================
Board dalmore-multi_v7_defconfig failure log:
    -------------------------------------------------
[    2.746046] input: NVIDIA Tegra Dalmore Headphones as /devices/soc0/sound.5/sound/card0/input0
[    2.759001] TCP: cubic registered
[    2.762416] NET: Registered protocol family 17
[    2.767483] Key type dns_resolver registered
[    2.773539] ThumbEE CPU extension supported.
[    2.777862] Registering SWP/SWPB emulation handler
[    2.782723] PJ4 iWMMXt coprocessor enabled.
[    2.793639] dvdd_ts: 1800 mV 
[    2.797932] usb1_vbus: 5000 mV 
[    2.801243] usb1_vbus: supplied by vdd-sys-5v0
[    2.807084] usb2_vbus: 5000 mV 
[    2.810386] usb2_vbus: supplied by vdd-sys-5v0
[    2.816198] vdd_hdmi_5v0: 5000 mV 
[    2.819760] vdd_hdmi_5v0: supplied by vdd-sys-5v0
[    2.829154] vdd_cam_1v8_reg: 1800 mV 
[    2.846801] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    2.853555] [drm] No driver support for vblank timestamp query.
[    2.972808] Console: switching to colour frame buffer device 240x75
[    3.058184] host1x drm: fb0:  frame buffer device
[    3.063079] host1x drm: registered panic notifier
[    3.067870] [drm] Initialized tegra 0.0.0 20120330 on minor 0
[    3.075745] platform 7d008000.usb: Driver tegra-ehci requests probe deferral
[    3.087356] tegra-ehci 7d008000.usb: EHCI Host Controller
[    3.093010] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 1
[    3.104040] tegra-ehci 7d008000.usb: irq 129, io mem 0x7d008000
[    3.122603] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.10
[    3.131776] hub 1-0:1.0: USB hub found
[    3.135839] hub 1-0:1.0: 1 port detected
[    3.144861] input: gpio-keys.3 as /devices/soc0/gpio-keys.3/input/input1
[    3.155956] palmas-rtc rtc.8: setting system clock to 2000-01-01 00:00:01 UTC (946684801)
[    3.198896] ALSA device list:
[    3.201906]   #0: NVIDIA Tegra Dalmore
[    3.209638] EXT4-fs (mmcblk0p1): couldn't mount as ext3 due to feature incompatibilities
[    3.219573] EXT4-fs (mmcblk0p1): couldn't mount as ext2 due to feature incompatibilities
[    3.258974] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null)
[    3.267290] VFS: Mounted root (ext4 filesystem) readonly on device 179:1.
[    3.282361] devtmpfs: mounted
[    3.287052] Freeing unused kernel memory: 556K (c0a6e000 - c0af9000)
~$off
# PYBOOT: Exception: timeout
========================================================================
Board hummingboard-multi_v7_defconfig failure log:
    -------------------------------------------------
C1 U-Boot > tftp 0x10800000 mainline/v3.14-11940-ge4f3054/multi_v7_defconfig/zImage
tftp 0x10800000 mainline/v3.14-11940-ge4f3054/multi_v7_defconfig/zImage
Using FEC device
TFTP from server 172.16.1.3; our IP address is 172.16.1.111
Filename 'mainline/v3.14-11940-ge4f3054/multi_v7_defconfig/zImage'.
Load address: 0x10800000
Loading: *#################################################################
     #################################################################
     #################################################################
     #################################################################
     #########################################################
     2 MiB/s
done
Bytes transferred = 4648072 (46ec88 hex)
C1 U-Boot >setenv serverip 172.16.1.3
 setenv serverip 172.16.1.3
C1 U-Boot >tftp 0x11000000 mainline/v3.14-11940-ge4f3054/multi_v7_defconfig/dtbs/imx6dl-hummingboard.dtb
 tftp 0x11000000 mainline/v3.14-11940-ge4f3054/multi_v7_defconfig/dtbs/imx6dl-hummingboard.dtb
Using FEC device
TFTP from server 172.16.1.3; our IP address is 172.16.1.111
Filename 'mainline/v3.14-11940-ge4f3054/multi_v7_defconfig/dtbs/imx6dl-hummingboard.dtb'.
Load address: 0x11000000
Loading: *##
     929.7 KiB/s
done
Bytes transferred = 25705 (6469 hex)
C1 U-Boot > printenv bootargs
printenv bootargs
bootargs=console=ttymxc0,115200 root=/dev/mmcblk0p2 rootwait debug earlyprintk
C1 U-Boot > bootz 0x10800000 - 0x11000000
bootz 0x10800000 - 0x11000000
Kernel image @ 0x10800000 [ 0x000000 - 0x46ec88 ]
## Flattened Device Tree blob at 11000000
   Booting using the fdt blob at 0x11000000
   Using Device Tree in place at 11000000, end 11009468
Starting kernel ...
~$off
# PYBOOT: Exception: timeout
========================================================================
Board omap5uevm-multi_lpae_defconfig failure log:
    -------------------------------------------------
[   46.731741] smps9: 2100 mV 
[   46.735549] smps10_out2: 5000 mV 
[   46.739769] smps10_out1: 5000 mV 
[   46.743632] ldo1: 1500 <--> 1800 mV 
[   46.748231] ldo2: 2800 mV 
[   46.752567] ldo3: 1500 mV 
[   46.756016] ldo4: 1500 <--> 1800 mV 
[   46.761262] ldo5: 1800 mV 
[   46.767094] ldo6: 1200 mV 
[   46.770774] ldo7: 2000 mV 
[   46.775099] ldo8: 3000 mV 
[   46.779296] ldo9: 1800 <--> 3000 mV at 900 mV 
[   46.785450] ldoln: 1800 mV 
[   46.789870] ldousb: 3250 mV 
[   46.793370] REGEN1: no parameters
[   46.796924] REGEN2: no parameters
[   46.800633] regen3: no parameters
[   46.804428] SYSEN1: no parameters
[   46.807985] SYSEN2: no parameters
[   47.050395] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz
[   47.057508] omap_i2c 4807c000.i2c: bus 4 rev0.12 at 400 kHz
[   47.063757] 4809c000.mmc supply vmmc_aux not found, using dummy regulator
[   47.071682] omap_hsmmc 4809c000.mmc: pins are not configured from the driver
[   47.110464] /home/build/work/batch/drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
[   47.123929] ALSA device list:
[   47.127034]   No soundcards found.
[   47.131083] Waiting for root device /dev/mmcblk1p2...
[   47.166959] mmc2: host does not support reading read-only switch. assuming write-enable.
[   47.177166] mmc2: new high speed SDHC card at address 0001
[   47.183114] mmcblk1: mmc2:0001 00000 14.6 GiB 
[   47.188600]  mmcblk1: p1 p2
[   47.240623] EXT4-fs (mmcblk1p2): couldn't mount as ext3 due to feature incompatibilities
[   47.249467] EXT4-fs (mmcblk1p2): couldn't mount as ext2 due to feature incompatibilities
[   47.272007] EXT4-fs (mmcblk1p2): mounted filesystem with ordered data mode. Opts: (null)
[   47.280483] VFS: Mounted root (ext4 filesystem) readonly on device 179:50.
[   47.295046] devtmpfs: mounted
[   47.298424] Freeing unused kernel memory: 560K (c0a74000 - c0b00000)
[   47.331560] Internal error: Oops - undefined instruction: 0 [#1] SMP ARM
~$off
# PYBOOT: Exception: timeout
========================================================================
Board omap5uevm-multi_v7_defconfig failure log:
    -------------------------------------------------
[   47.616032] smps9: 2100 mV 
[   47.619858] smps10_out2: 5000 mV 
[   47.624061] smps10_out1: 5000 mV 
[   47.627911] ldo1: 1500 <--> 1800 mV 
[   47.632489] ldo2: 2800 mV 
[   47.636810] ldo3: 1500 mV 
[   47.640270] ldo4: 1500 <--> 1800 mV 
[   47.645502] ldo5: 1800 mV 
[   47.651325] ldo6: 1200 mV 
[   47.655013] ldo7: 2000 mV 
[   47.659361] ldo8: 3000 mV 
[   47.663563] ldo9: 1800 <--> 3000 mV at 900 mV 
[   47.669704] ldoln: 1800 mV 
[   47.674130] ldousb: 3250 mV 
[   47.677617] REGEN1: no parameters
[   47.681194] REGEN2: no parameters
[   47.684876] regen3: no parameters
[   47.688668] SYSEN1: no parameters
[   47.692228] SYSEN2: no parameters
[   47.929314] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz
[   48.209324] omap_i2c 4807c000.i2c: bus 4 rev0.12 at 400 kHz
[   48.215554] 4809c000.mmc supply vmmc_aux not found, using dummy regulator
[   48.223462] omap_hsmmc 4809c000.mmc: pins are not configured from the driver
[   48.269395] /home/build/work/batch/drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
[   48.282734] ALSA device list:
[   48.285831]   No soundcards found.
[   48.289831] Waiting for root device /dev/mmcblk1p2...
[   48.305888] mmc2: host does not support reading read-only switch. assuming write-enable.
[   48.316091] mmc2: new high speed SDHC card at address 0001
[   48.322051] mmcblk1: mmc2:0001 00000 14.6 GiB 
[   48.327524]  mmcblk1: p1 p2
[   48.399530] EXT4-fs (mmcblk1p2): couldn't mount as ext3 due to feature incompatibilities
[   48.408348] EXT4-fs (mmcblk1p2): couldn't mount as ext2 due to feature incompatibilities
[   48.431301] EXT4-fs (mmcblk1p2): mounted filesystem with ordered data mode. Opts: (null)
[   48.439779] VFS: Mounted root (ext4 filesystem) readonly on device 179:50.
[   48.449491] devtmpfs: mounted
[   48.452859] Freeing unused kernel memory: 556K (c0a6e000 - c0af9000)
[   48.486721] Internal error: Oops - undefined instruction: 0 [#1] SMP ARM
~$off
# PYBOOT: Exception: timeout
========================================================================
Board panda-multi_v7_defconfig failure log:
    -------------------------------------------------
[    1.673492] Key type dns_resolver registered
[    1.678466] Power Management for TI OMAP4+ devices.
[    1.683654] Power Management for TI OMAP4.
[    1.687927] OMAP4 PM: u-boot >= v2012.07 is required for full PM support
[    1.695098] ThumbEE CPU extension supported.
[    1.699859] Registering SWP/SWPB emulation handler
[    1.699859] PJ4 iWMMXt coprocessor enabled.
[    1.709960] vwl1271: 1800 mV 
[    1.714630] Skipping twl internal clock init and using bootloader value (unknown osc rate)
[    1.724395] twl 0-0048: PIH (irq 39) nested IRQs
[    1.730072] twl_rtc rtc.15: Power up reset detected.
[    1.735961] twl_rtc rtc.15: Enabling TWL-RTC
[    1.742950] twl_rtc rtc.15: rtc core: registered rtc.15 as rtc0
[    1.749908] VAUX1_6030: 1000 <--> 3000 mV at 2800 mV 
[    1.755981] VAUX2_6030: 1200 <--> 2800 mV at 1800 mV 
[    1.762054] VAUX3_6030: 1000 <--> 3000 mV at 1200 mV 
[    1.768218] VMMC: 1200 <--> 3000 mV at 3000 mV 
[    1.773742] VPP: 1800 <--> 2500 mV at 1900 mV 
[    1.779235] VUSIM: 1200 <--> 2900 mV at 1800 mV 
[    1.784240] VDAC: 1800 mV 
[    1.784240] VANA: 2100 mV 
[    1.791503] VCXIO: 1800 mV 
[    1.794464] VUSB: 3300 mV 
[    1.798431] V1V8: 1800 mV 
[    1.802001] V2V1: 2100 mV 
[    1.878997] usb 1-1: new high-speed USB device number 2 using ehci-omap
[    2.031005] hub 1-1:1.0: USB hub found
[    2.035583] hub 1-1:1.0: 5 ports detected
[    2.049133] omap_i2c 48070000.i2c: bus 0 rev0.11 at 400 kHz
[    2.056762] omap_i2c 48072000.i2c: bus 1 rev0.11 at 400 kHz
[    2.065643] omap_i2c 48060000.i2c: bus 2 rev0.11 at 100 kHz
[    2.073120] omap_i2c 48350000.i2c: bus 3 rev0.11 at 400 kHz
[    2.079650] 4809c000.mmc supply vmmc_aux not found, using dummy regulator
[    2.088043] omap_hsmmc 4809c000.mmc: pins are not configured from the driver
[    2.129638] 480d5000.mmc supply vmmc_aux not found, using dummy regulator
[    2.461730] usb 1-1.1: new high-speed USB device number 3 using ehci-omap
[    2.602172] smsc95xx v1.0.4
[    3.213623] smsc95xx 1-1.1:1.0 eth0: register 'smsc95xx' at usb-4a064c00.ehci-1.1, smsc95xx USB 2.0 Ethernet, 5e:2e:78:88:4d:f9
~$off
# PYBOOT: Exception: timeout
========================================================================
Board seaboard-multi_v7_defconfig failure log:
    -------------------------------------------------
[    2.525143] Unable to handle kernel paging request at virtual address 00003aa0
[    2.525147] Unable to handle kernel paging request at virtual address 00003aa0
[    2.525150] Unable to handle kernel paging request at virtual address 00003aa0
[    2.525153] Unable to handle kernel paging request at virtual address 00003aa0
[    2.525156] Unable to handle kernel paging request at virtual address 00003aa0
[    2.525160] Unable to handle kernel paging request at virtual address 00003aa0
[    2.525163] Unable to handle kernel paging request at virtual address 00003aa0
[    2.701159] Alignment trap: not handling instruction e1923f9f at [<c07d1aec>]
[    2.708279] Unhandled fault: alignment exception (0x001) at 0x20736eae
[    2.714792] Internal error: : 1 [#2] SMP ARM
[    2.719048] Modules linked in:
[    2.722104] CPU: 0 PID: 29042 Comm:  %s
[    2.722104]  Not tainted 3.14.0-11940-ge4f3054 #1
[    2.730617] task: c09ab4a4 ti: ea03a000 task.ti: 70737573
[    2.736015] PC is at _raw_spin_lock_irqsave+0x14/0x4c
[    2.741059] LR is at __down_read_trylock+0x14/0x54
[    2.745839] pc : [<c07d1af0>]    lr : [<c027cfb4>]    psr: 40000193
[    2.745839] sp : ea03bee8  ip : c0b06390  fp : ea03bfd0
[    2.757292] r10: 00000028  r9 : 20736eaa  r8 : 0000017c
[    2.762503] r7 : c09ab4a4  r6 : 00000017  r5 : 20736eae  r4 : 20736eaa
[    2.769013] r3 : 00000193  r2 : 20736eae  r1 : 00000000  r0 : 40000193
[    2.775526] Flags: nZcv  IRQs off  FIQs on  Mode SVC_32  ISA ARM  Segment user
[    2.782732] Control: 10c5387d  Table: 2a4c804a  DAC: 00000015
[    2.788463] Process  %s
[    2.788463]  (pid: 29042, stack limit = 0x707377c3)
[    2.795755] Stack: (0xea03bee8 to 0x70739573)
[    2.800114] [<c07d1af0>] (_raw_spin_lock_irqsave) from [<c027cfb4>] (__down_read_trylock+0x14/0x54)
[    2.809156] [<c027cfb4>] (__down_read_trylock) from [<c0217cd0>] (do_page_fault+0x78/0x27c)
[    2.817497] [<c0217cd0>] (do_page_fault) from [<c02083d4>] (do_DataAbort+0x38/0x98)
[    2.825152] [<c02083d4>] (do_DataAbort) from [<c0212258>] (__dabt_svc+0x38/0x60)
[    2.832530] Exception stack(0xea03bfd0 to 0xea03c018)
[    2.837571] bfc0:                                     0000017c 00000017 ea03c000 00000193
[    2.845734] bfe0: ea03c018 c0217c58 00000017 00000000 0000017c 00404100 ea068000 ea03c0f0
[    2.853895] c000: c0b06390 ea03c018 c02083d4 c0217c84 00000193 ffffffff
[    2.860499] Code: e10f0000 f10c0080 f592f000 e1923f9f (e2831801) 
[    2.866581] ---[ end trace c8b44393a3a7cf57 ]---
[    2.871187] Alignment trap: not handling instruction e1923f9f at [<c07d1aec>]
[    2.878307] Unhandled fault: alignment exception (0x001) at 0x20736eae
~$off
# PYBOOT: Exception: timeout
========================================================================
Board snowball-multi_v7_defconfig failure log:
    -------------------------------------------------
BOOTP broadcast 1
*** Unhandled DHCP Option in OFFER/ACK: 28
*** Unhandled DHCP Option in OFFER/ACK: 28
DHCP client bound to address 172.16.1.157
U8500 $ setenv serverip 172.16.1.3
setenv serverip 172.16.1.3
U8500 $ tftp 0x00100000 tmp/snowball-Z7Q25s/tmpLiAzLr-uImage
tftp 0x00100000 tmp/snowball-Z7Q25s/tmpLiAzLr-uImage
smc911x: detected LAN9221 controller
smc911x: phy initialized
smc911x: MAC 08:00:08:1e:0f:44
Using smc911x-0 device
TFTP from server 172.16.1.3; our IP address is 172.16.1.157
Filename 'tmp/snowball-Z7Q25s/tmpLiAzLr-uImage'.
Load address: 0x100000
Loading: *#################################################################
     #################################################################
     #################################################################
     #################################################################
     ############################################################
done
Bytes transferred = 4689385 (478de9 hex)
U8500 $ printenv bootargs
printenv bootargs
bootargs=console=ttyAMA2,115200 root=/dev/mmcblk0p4 rootwait rw debug earlyprintk
U8500 $ bootm 0x00100000  
bootm 0x00100000  
## Booting kernel from Legacy Image at 00100000 ...
   Image Name:   Linux
   Image Type:   ARM Linux Kernel Image (uncompressed)
   Data Size:    4689321 Bytes =  4.5 MB
   Load Address: 00008000
   Entry Point:  00008000
   Loading Kernel Image ... OK
OK
Starting kernel ...
~$off
# PYBOOT: Exception: timeout
========================================================================
Board trimslice-multi_v7_defconfig failure log:
    -------------------------------------------------
[    4.789412]  (pid: 29042, stack limit = 0x707377c3)
[    4.796733] Stack: (0xea03bee8 to 0x70739573)
[    4.801140] [<c07d1af0>] (_raw_spin_lock_irqsave) from [<c027cfb4>] (__down_read_trylock+0x14/0x54)
[    4.810236] [<c027cfb4>] (__down_read_trylock) from [<c0217cd0>] (do_page_fault+0x78/0x27c)
[    4.818620] [<c0217cd0>] (do_page_fault) from [<c02083d4>] (do_DataAbort+0x38/0x98)
[    4.826325] [<c02083d4>] (do_DataAbort) from [<c0212258>] (__dabt_svc+0x38/0x60)
[    4.833727] Exception stack(0xea03bfd0 to 0xea03c018)
[    4.838798] bfc0:                                     0000017c 00000017 ea03c000 00000193
[    4.846995] bfe0: ea03c018 c0217c58 00000017 00000000 0000017c 00404100 ea068000 ea03c0f0
[    4.855186] c000: c0b06390 ea03c018 c02083d4 c0217c84 00000193 ffffffff
[    4.861825] Code: e10f0000 f10c0080 f592f000 e1923f9f (e2831801) 
[    4.867933] ---[ end trace 90e88fa2aa75114b ]---
[    4.872564] Alignment trap: not handling instruction e1923f9f at [<c07d1aec>]
[    4.879706] Unhandled fault: alignment exception (0x001) at 0x20736eae
[    4.890246] Unable to handle kernel paging request at virtual address fffffffe
[    4.897488] Unable to handle kernel paging request at virtual address 00003aa0
[    4.904717] Unable to handle kernel paging request at virtual address 00003aa0
[    4.911941] Unable to handle kernel paging request at virtual address 00003aa0
[    4.919166] Unable to handle kernel paging request at virtual address 00003aa0
[    4.926392] Unable to handle kernel paging request at virtual address 00003aa0
[    4.933618] Unable to handle kernel paging request at virtual address 00003aa0
[    4.940843] Unable to handle kernel paging request at virtual address 00003aa0
[    4.948067] Unable to handle kernel paging request at virtual address 00003aa0
[    4.955292] Unable to handle kernel paging request at virtual address 00003aa0
[    4.962517] Unable to handle kernel paging request at virtual address 00003aa0
[    4.969741] Unable to handle kernel paging request at virtual address 00003aa0
[    4.976965] Unable to handle kernel paging request at virtual address 00003aa0
[    4.984189] Unable to handle kernel paging request at virtual address 00003aa0
[    4.991413] Unable to handle kernel paging request at virtual address 00003aa0
[    4.998638] Unable to handle kernel paging request at virtual address 00003aa0
[    5.005863] Unable to handle kernel paging request at virtual address 00003aa0
[    5.013088] Unable to handle kernel paging request at virtual address 00003aa0
[    5.020314] Unable to handle kernel paging request at virtual address 00003aa0
[    5.027539] Unable to handle kernel paging request at virtual address 00003aa0
[    5.034763] Unable to handle kernel paging request at virtual address 00003aa0
[    5.041988] Unable to handle kernel paging request at virtual address 00003aa0
[    5.049212] Unable to handle kernel paging request at virtual address 00003aa0
[    5.056435] Unable to handle kernel paging request at virtual address 00003aa0
~$off
# PYBOOT: Exception: timeout
========================================================================
Board wandboard-multi_v7_defconfig failure log:
    -------------------------------------------------
tftp 0x10800000 mainline/v3.14-11940-ge4f3054/multi_v7_defconfig/zImage
Using FEC device
TFTP from server 172.16.1.3; our IP address is 172.16.1.110
Filename 'mainline/v3.14-11940-ge4f3054/multi_v7_defconfig/zImage'.
Load address: 0x10800000
Loading: *#################################################################
     #################################################################
     #################################################################
     #################################################################
     #########################################################
     6.1 MiB/s
done
Bytes transferred = 4648072 (46ec88 hex)
=> setenv serverip 172.16.1.3
setenv serverip 172.16.1.3
=> tftp 0x11000000 mainline/v3.14-11940-ge4f3054/multi_v7_defconfig/dtbs/imx6q-wandboard.dtb
tftp 0x11000node: wandboard       status: on
000 mainline/v3.14-11940-ge4f3054/multi_v7_defconfig/dtbs/imx6q-wandboard.dtb
Using FEC device
TFTP from server 172.16.1.3; our IP address is 172.16.1.110
Filename 'mainline/v3.14-11940-ge4f3054/multi_v7_defconfig/dtbs/imx6q-wandboard.dtb'.
Load address: 0x11000000
Loading: *##
     1.7 MiB/s
done
Bytes transferred = 29143 (71d7 hex)
=> printenv bootargs
printenv bootargs
bootargs=console=ttymxc0,115200 root=/dev/mmcblk0p2 rootwait debug
=> bootz 0x10800000 - 0x11000000
bootz 0x10800000 - 0x11000000
Kernel image @ 0x10800000 [ 0x000000 - 0x46ec88 ]
## Flattened Device Tree blob at 11000000
   Booting using the fdt blob at 0x11000000
   Using Device Tree in place at 11000000, end 1100a1d6
Starting kernel ...
~$off
# PYBOOT: Exception: timeout