mainline boot: 16 passed 17 failed (mainline/v3.14-12236-g39de65a) - Kernel-build-reports

9 Apr 2014


      Failed boards:
bbb          multi_v7_defconfig            :	FAILED	3:11.70
    beaver       multi_v7_defconfig            :	FAILED	2:57.42
    capri        multi_v7_defconfig            :	FAILED	2:57.83
    cubie        multi_v7_defconfig            :	FAILED	2:57.08
    cubie2       sunxi_defconfig               :	FAILED	1:19.14
    cubie2       multi_v7_defconfig            :	FAILED	3:02.57
    cubie2       multi_lpae_defconfig          :	FAILED	2:54.06
    dalmore      multi_v7_defconfig            :	FAILED	3:04.64
    dalmore      multi_lpae_defconfig          :	FAILED	3:01.94
    hummingboard multi_v7_defconfig            :	FAILED	1:05.40
    omap5uevm    multi_v7_defconfig            :	FAILED	3:55.31
    omap5uevm    multi_lpae_defconfig          :	FAILED	3:49.15
    panda        multi_v7_defconfig            :	FAILED	3:08.56
    seaboard     multi_v7_defconfig            :	FAILED	3:02.59
    snowball     multi_v7_defconfig            :	FAILED	1:12.33
    trimslice    multi_v7_defconfig            :	FAILED	3:07.03
    wandboard    multi_v7_defconfig            :	FAILED	1:05.42
Successful boards:
apc          vt8500_v6_v7_defconfig        :	passed	1:19.84
    arndale      exynos_defconfig              :	passed	1:03.18
    bbb          omap2plus_defconfig           :	passed	1:33.27
    beaver       tegra_defconfig               :	passed	0:50.44
    capri        bcm_defconfig                 :	passed	0:43.38
    cubie        sunxi_defconfig               :	passed	0:52.67
    dalmore      tegra_defconfig               :	passed	1:18.08
    hummingboard imx_v6_v7_defconfig           :	passed	1:17.95
    omap5uevm    omap2plus_defconfig           :	warnings	1:13.27
    panda        omap2plus_defconfig           :	warnings	1:16.44
    sama5        sama5_defconfig               :	passed	1:50.78
    seaboard     tegra_defconfig               :	passed	0:57.74
    snow         exynos_defconfig              :	passed	1:32.22
    snowball     u8500_defconfig               :	passed	1:22.50
    trimslice    tegra_defconfig               :	passed	0:58.35
    wandboard    imx_v6_v7_defconfig           :	passed	0:55.07
Offline boards:
Board legend is available at http://arm-soc.lixom.net/boards.html
Last entries of failed logs below:
========================================================================
Board bbb-multi_v7_defconfig failure log:
    -------------------------------------------------
[    1.226501] usbcore: registered new interface driver uvcvideo
[    1.232632] USB Video Class driver (1.1.1)
[    1.236960] gspca_main: v2.14.0 registered
[    1.243290] sdhci: Secure Digital Host Controller Interface driver
[    1.249834] sdhci: Copyright(c) Pierre Ossman
[    1.327207] sdhci-pltfm: SDHCI platform and OF driver helper
[    1.334068] usbcore: registered new interface driver usbhid
[    1.339983] usbhid: USB HID core driver
[    1.348995] TCP: cubic registered
[    1.352498] NET: Registered protocol family 17
[    1.357611] Key type dns_resolver registered
[    1.363046] ThumbEE CPU extension supported.
[    1.367641] Registering SWP/SWPB emulation handler
[    1.372678] PJ4 iWMMXt coprocessor enabled.
[    1.384904] omap_i2c 44e0b000.i2c: bus 0 rev0.11 at 400 kHz
[    1.439784] mmc1: BKOPS_EN bit is not set
[    1.446463] mmc1: new high speed MMC card at address 0001
[    1.452891] mmcblk0: mmc1:0001 MMC02G 1.78 GiB 
[    1.457902] davinci_mdio 4a101000.mdio: davinci mdio revision 1.6
[    1.464314] davinci_mdio 4a101000.mdio: detected phy mask fffffffe
[    1.471306] mmcblk0boot0: mmc1:0001 MMC02G partition 1 1.00 MiB
[    1.477972] mmcblk0boot1: mmc1:0001 MMC02G partition 2 1.00 MiB
[    1.485391] libphy: 4a101000.mdio: probed
[    1.489732] davinci_mdio 4a101000.mdio: phy[0]: device 4a101000.mdio:00, driver unknown
[    1.499496] Detected MACID = bc:6a:29:7a:42:a8
[    1.505746] /home/build/work/batch/drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
[    1.519819] ALSA device list:
[    1.522959]   No soundcards found.
[    1.527895]  mmcblk0: p1 p2
[    1.533720]  mmcblk0boot1: unknown partition table
[    1.540802]  mmcblk0boot0: unknown partition table
[    1.548003] EXT4-fs (mmcblk0p2): couldn't mount as ext3 due to feature incompatibilities
[    1.557794] EXT4-fs (mmcblk0p2): couldn't mount as ext2 due to feature incompatibilities
[    1.617377] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
[    1.625952] VFS: Mounted root (ext4 filesystem) on device 179:2.
[    1.652733] devtmpfs: mounted
[    1.656918] Freeing unused kernel memory: 556K (c0a6e000 - c0af9000)
[    1.731764] Internal error: Oops - undefined instruction: 0 [#1] SMP ARM
~$off
# PYBOOT: Exception: timeout
========================================================================
Board beaver-multi_v7_defconfig failure log:
    -------------------------------------------------
[    3.660260] pci 0000:00:01.0:   bridge window [io  0x1000-0x1fff]
[    3.666345] pci 0000:00:01.0:   bridge window [mem 0x28000000-0x280fffff 64bit pref]
[    3.674088] pci 0000:00:01.0: nv_msi_ht_cap_quirk didn't locate host bridge
[    3.681172] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[    3.686763] r8169 0000:01:00.0: enabling device (0140 -> 0143)
[    3.693146] r8169 0000:01:00.0 eth0: RTL8168evl/8111evl at 0xf002e000, 02:04:4b:01:60:99, XID 0c900800 IRQ 472
[    3.703137] r8169 0000:01:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[    3.713097] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    3.719699] [drm] No driver support for vblank timestamp query.
[    3.725657] host1x drm: No connectors reported connected with modes
[    3.731913] [drm] Cannot find any crtc or sizes - going 1024x768
[    3.750465] Console: switching to colour frame buffer device 128x48
[    3.762508] host1x drm: fb0:  frame buffer device
[    3.767217] host1x drm: registered panic notifier
[    3.771914] [drm] Initialized tegra 0.0.0 20120330 on minor 0
[    3.778112] platform 7d004000.usb: Driver tegra-ehci requests probe deferral
[    3.785494] platform 7d008000.usb: Driver tegra-ehci requests probe deferral
[    3.796833] tegra-ehci 7d004000.usb: EHCI Host Controller
[    3.802231] tegra-ehci 7d004000.usb: new USB bus registered, assigned bus number 1
[    3.810031] tegra-ehci 7d004000.usb: irq 53, io mem 0x7d004000
[    3.833062] tegra-ehci 7d004000.usb: USB 2.0 started, EHCI 1.00
[    3.839433] hub 1-0:1.0: USB hub found
[    3.843210] hub 1-0:1.0: 1 port detected
[    3.847551] tegra-ehci 7d008000.usb: EHCI Host Controller
[    3.852946] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 2
[    3.860751] tegra-ehci 7d008000.usb: irq 129, io mem 0x7d008000
[    3.883060] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.00
[    3.889350] hub 2-0:1.0: USB hub found
[    3.893134] hub 2-0:1.0: 1 port detected
[    3.901015] tps65910-rtc tps65910-rtc: setting system clock to 2000-01-01 00:00:02 UTC (946684802)
[    3.913702] ALSA device list:
[    3.916670]   #0: NVIDIA Tegra Beaver
[    3.922818] EXT4-fs (mmcblk0p1): couldn't mount as ext3 due to feature incompatibilities
[    3.932504] EXT4-fs (mmcblk0p1): couldn't mount as ext2 due to feature incompatibilities
[    3.948387] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null)
[    3.956505] VFS: Mounted root (ext4 filesystem) readonly on device 179:1.
[    3.982693] devtmpfs: mounted
[    3.986124] Freeing unused kernel memory: 556K (c0a6e000 - c0af9000)
~$off
# PYBOOT: Exception: timeout
========================================================================
Board capri-multi_v7_defconfig failure log:
    -------------------------------------------------
[    0.930000] mmcblk0boot0: mmc0:0001 016G4A partition 1 2.00 MiB
[    0.930000] mmcblk0boot1: mmc0:0001 016G4A partition 2 2.00 MiB
[    0.940000] mmcblk0rpmb: mmc0:0001 016G4A partition 3 256 KiB
[    0.940000] Alternate GPT is invalid, using primary GPT.
[    0.950000]  mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8
[    0.950000]  mmcblk0boot1: unknown partition table
[    0.960000]  mmcblk0boot0: unknown partition table
[    1.010000] EXT4-fs (mmcblk0p8): mounted filesystem with ordered data mode. Opts: (null)
[    1.020000] VFS: Mounted root (ext4 filesystem) readonly on device 179:8.
[    1.020000] devtmpfs: mounted
[    1.030000] Freeing unused kernel memory: 556K (c0a6e000 - c0af9000)
[    1.050000] Internal error: Oops - undefined instruction: 0 [#1] SMP ARM
[    1.050000] Alignment trap: not handling instruction e1923f9f at [<c07d2054>]
[    1.050000] Unhandled fault: alignment exception (0x001) at 0x20736eae
[    1.050000] Internal error: : 1 [#2] SMP ARM
[    1.050000] Modules linked in:
[    1.050000] CPU: 0 PID: 29042 Comm:  %s
[    1.050000]  Not tainted 3.14.0-12236-g39de65a #1
[    1.050000] task: c09ab714 ti: ea838000 task.ti: 70737573
[    1.050000] PC is at _raw_spin_lock_irqsave+0x14/0x4c
[    1.050000] LR is at __down_read_trylock+0x14/0x54
[    1.050000] pc : [<c07d2058>]    lr : [<c027cfb4>]    psr: 40000193
[    1.050000] sp : ea839f38  ip : c0b06390  fp : ea83a020
[    1.050000] r10: 00000028  r9 : 20736eaa  r8 : 0000017c
[    1.050000] r7 : c09ab714  r6 : 00000017  r5 : 20736eae  r4 : 20736eaa
[    1.050000] r3 : 00000193  r2 : 20736eae  r1 : 00000000  r0 : 40000193
[    1.050000] Flags: nZcv  IRQs off  FIQs on  Mode SVC_32  ISA ARM  Segment user
[    1.050000] Control: 10c5387d  Table: babf404a  DAC: 00000015
[    1.050000] Process  %s
[    1.050000]  (pid: 29042, stack limit = 0x707377c3)
[    1.050000] Stack: (0xea839f38 to 0x70739573)
[    1.050000] [<c07d2058>] (_raw_spin_lock_irqsave) from [<c027cfb4>] (__down_read_trylock+0x14/0x54)
[    1.050000] [<c027cfb4>] (__down_read_trylock) from [<c0217cd0>] (do_page_fault+0x78/0x27c)
[    1.050000] [<c0217cd0>] (do_page_fault) from [<c02083d4>] (do_DataAbort+0x38/0x98)
[    1.050000] Code: e10f0000 f10c0080 f592f000 e1923f9f (e2831801) 
[    1.050000] ---[ end trace 01ccce6300bf521f ]---
[    1.050000] Alignment trap: not handling instruction e1923f9f at [<c07d2054>]
[    1.050000] Unhandled fault: alignment exception (0x001) at 0x20736eae
~$off
# PYBOOT: Exception: timeout
========================================================================
Board cubie-multi_v7_defconfig failure log:
    -------------------------------------------------
[    0.968913] usbcore: registered new interface driver usb-storage
[    0.976042] mousedev: PS/2 mouse device common for all mice
[    0.982900] i2c /dev entries driver
[    0.988055] usbcore: registered new interface driver uvcvideo
[    0.993869] USB Video Class driver (1.1.1)
[    0.997961] gspca_main: v2.14.0 registered
[    1.004857] sdhci: Secure Digital Host Controller Interface driver
[    1.011030] sdhci: Copyright(c) Pierre Ossman
[    1.015750] sdhci-pltfm: SDHCI platform and OF driver helper
[    1.021871] usbcore: registered new interface driver usbhid
[    1.027464] usbhid: USB HID core driver
[    1.033885] TCP: cubic registered
[    1.037204] NET: Registered protocol family 17
[    1.041806] Key type dns_resolver registered
[    1.046234] ThumbEE CPU extension supported.
[    1.050519] Registering SWP/SWPB emulation handler
[    1.055324] PJ4 iWMMXt coprocessor enabled.
[    1.060590] ahci-5v: 5000 mV 
[    1.064057] usb1-vbus: 5000 mV 
[    1.067566] usb2-vbus: 5000 mV 
[    1.071248] platform 1c14000.usb: Driver ehci-platform requests probe deferral
[    1.079078] platform 1c1c000.usb: Driver ehci-platform requests probe deferral
[    1.086735] /home/build/work/batch/drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
[    1.100073] platform 1c14000.usb: Driver ehci-platform requests probe deferral
[    1.107962] platform 1c1c000.usb: Driver ehci-platform requests probe deferral
[    3.432853] sun4i-emac 1c0b000.ethernet eth0: Link is Up - 100Mbps/Full - flow control rx/tx
[    3.452838] Sending DHCP requests ., OK
[    3.473279] IP-Config: Got DHCP answer from 172.16.1.1, my address is 172.16.1.173
[    3.481057] IP-Config: Complete:
[    3.484315]      device=eth0, hwaddr=08:00:08:1e:2f:44, ipaddr=172.16.1.173, mask=255.255.255.0, gw=172.16.1.1
[    3.494320]      host=172.16.1.173, domain=lixom.net, nis-domain=(none)
[    3.500926]      bootserver=172.16.1.7, rootserver=172.16.1.7, rootpath=
[    3.507458]      nameserver0=172.16.1.1
[    3.511585] ALSA device list:
[    3.514565]   No soundcards found.
[    3.523312] VFS: Mounted root (nfs filesystem) on device 0:11.
[    3.529576] devtmpfs: mounted
[    3.533162] Freeing unused kernel memory: 556K (c0a6e000 - c0af9000)
~$off
# PYBOOT: Exception: timeout
========================================================================
Board cubie2-multi_lpae_defconfig failure log:
    -------------------------------------------------
[    3.789616] ., OK
[    3.810078] IP-Config: Got DHCP answer from 172.16.1.1, my address is 172.16.1.109
[    3.817890] IP-Config: Complete:
[    3.821162]      device=eth0, hwaddr=08:00:08:1e:2f:64, ipaddr=172.16.1.109, mask=255.255.255.0, gw=172.16.1.1
[    3.831162]      host=172.16.1.109, domain=lixom.net, nis-domain=(none)
[    3.837768]      bootserver=172.16.1.7, rootserver=172.16.1.7, rootpath=
[    3.844296]      nameserver0=172.16.1.1
[    3.848429] ALSA device list:
[    3.851411]   No soundcards found.
[    3.860228] VFS: Mounted root (nfs filesystem) on device 0:11.
[    3.866485] devtmpfs: mounted
[    3.870105] Freeing unused kernel memory: 560K (c0a75000 - c0b01000)
[    3.893978] Internal error: Oops - undefined instruction: 0 [#1] SMP ARM
[    3.900786] Alignment trap: not handling instruction e1923f9f at [<c07d8ec4>]
[    3.907914] Unhandled fault: alignment exception (0x221) at 0x20736eae
[    3.914432] Internal error: : 221 [#2] SMP ARM
[    3.918869] Modules linked in:
[    3.921937] CPU: 0 PID: 29042 Comm:  %s
[    3.921937]  Not tainted 3.14.0-12236-g39de65a #1
[    3.930460] task: c09b2750 ti: ea03e000 task.ti: 70737573
[    3.935864] PC is at _raw_spin_lock_irqsave+0x14/0x4c
[    3.940912] LR is at __down_read_trylock+0x14/0x54
[    3.945699] pc : [<c07d8ec8>]    lr : [<c027dd08>]    psr: 40000193
[    3.945699] sp : ea03ffb8  ip : c0b0e3e8  fp : ea0400a0
[    3.957159] r10: 00000028  r9 : 20736eaa  r8 : 0000017c
[    3.962376] r7 : c09b2750  r6 : 00000207  r5 : 20736eae  r4 : 20736eaa
[    3.968893] r3 : 20000193  r2 : 20736eae  r1 : 00000000  r0 : 40000193
[    3.975412] Flags: nZcv  IRQs off  FIQs on  Mode SVC_32  ISA ARM  Segment user
[    3.982623] Control: 30c5387d  Table: 6a3ed500  DAC: fffffffd
[    3.988360] Process  %s
[    3.988360]  (pid: 29042, stack limit = 0x707377c3)
[    3.995659] Stack: (0xea03ffb8 to 0x70739573)
[    4.000027] [<c07d8ec8>] (_raw_spin_lock_irqsave) from [<c027dd08>] (__down_read_trylock+0x14/0x54)
[    4.009071] [<c027dd08>] (__down_read_trylock) from [<c0218010>] (do_page_fault+0x78/0x27c)
[    4.017416] Code: e10f0000 f10c0080 f592f000 e1923f9f (e2831801) 
[    4.023503] ---[ end trace 689d023ed820a22b ]---
[    4.028117] Alignment trap: not handling instruction e1923f9f at [<c07d8ec4>]
[    4.035240] Unhandled fault: alignment exception (0x221) at 0x20736eae
~$off
# PYBOOT: Exception: timeout
========================================================================
Board cubie2-multi_v7_defconfig failure log:
    -------------------------------------------------
[    3.429955] IP-Config: Got DHCP answer from 172.16.1.1, my address is 172.16.1.109
[    3.437786] IP-Config: Complete:
[    3.441061]      device=eth0, hwaddr=08:00:08:1e:2f:64, ipaddr=172.16.1.109, mask=255.255.255.0, gw=172.16.1.1
[    3.451061]      host=172.16.1.109, domain=lixom.net, nis-domain=(none)
[    3.457666]      bootserver=172.16.1.7, rootserver=172.16.1.7, rootpath=
[    3.464194]      nameserver0=172.16.1.1
[    3.468332] ALSA device list:
[    3.471312]   No soundcards found.
[    3.480232] VFS: Mounted root (nfs filesystem) on device 0:11.
[    3.486509] devtmpfs: mounted
[    3.490124] Freeing unused kernel memory: 556K (c0a6e000 - c0af9000)
[    3.513685] Internal error: Oops - undefined instruction: 0 [#1] SMP ARM
[    3.520495] Alignment trap: not handling instruction e1923f9f at [<c07d2054>]
[    3.527622] Unhandled fault: alignment exception (0x001) at 0x20736eae
[    3.534141] Internal error: : 1 [#2] SMP ARM
[    3.538403] Modules linked in:
[    3.541472] CPU: 0 PID: 29042 Comm:  %s
[    3.541472]  Not tainted 3.14.0-12236-g39de65a #1
[    3.549995] task: c09ab714 ti: ea03c000 task.ti: 70737573
[    3.555401] PC is at _raw_spin_lock_irqsave+0x14/0x4c
[    3.560450] LR is at __down_read_trylock+0x14/0x54
[    3.565236] pc : [<c07d2058>]    lr : [<c027cfb4>]    psr: 40000193
[    3.565236] sp : ea03df18  ip : c0b06390  fp : ea03e000
[    3.576696] r10: 00000028  r9 : 20736eaa  r8 : 0000017c
[    3.581913] r7 : c09ab714  r6 : 00000017  r5 : 20736eae  r4 : 20736eaa
[    3.588430] r3 : 20000193  r2 : 20736eae  r1 : 00000000  r0 : 40000193
[    3.594951] Flags: nZcv  IRQs off  FIQs on  Mode SVC_32  ISA ARM  Segment user
[    3.602162] Control: 10c5387d  Table: 6a47006a  DAC: 00000015
[    3.607899] Process  %s
[    3.607899]  (pid: 29042, stack limit = 0x707377c3)
[    3.615198] Stack: (0xea03df18 to 0x70739573)
[    3.619567] [<c07d2058>] (_raw_spin_lock_irqsave) from [<c027cfb4>] (__down_read_trylock+0x14/0x54)
[    3.628611] [<c027cfb4>] (__down_read_trylock) from [<c0217cd0>] (do_page_fault+0x78/0x27c)
[    3.636958] [<c0217cd0>] (do_page_fault) from [<c02083d4>] (do_DataAbort+0x38/0x98)
[    3.644607] Code: e10f0000 f10c0080 f592f000 e1923f9f (e2831801) 
[    3.650697] ---[ end trace 8cb9206db3b7b9b8 ]---
[    3.655311] Alignment trap: not handling instruction e1923f9f at [<c07d2054>]
[    3.662434] Unhandled fault: alignment exception (0x001) at 0x20736eae
~$off
# PYBOOT: Exception: timeout
========================================================================
Board cubie2-sunxi_defconfig failure log:
    -------------------------------------------------
[    0.017742] platform ahci-5v.2: Driver reg-fixed-voltage requests probe deferral
[    0.017766] reg-fixed-voltage usb1-vbus.3: could not find pctldev for node /soc@01c00000/pinctrl@01c20800/usb1_vbus_pin@0, deferring probe
[    0.017780] platform usb1-vbus.3: Driver reg-fixed-voltage requests probe deferral
[    0.017803] reg-fixed-voltage usb2-vbus.4: could not find pctldev for node /soc@01c00000/pinctrl@01c20800/usb2_vbus_pin@0, deferring probe
[    0.017816] platform usb2-vbus.4: Driver reg-fixed-voltage requests probe deferral
[    0.018768] Switched to clocksource arch_sys_counter
[    0.025784] NET: Registered protocol family 2
[    0.026258] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
[    0.026344] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[    0.026466] TCP: Hash tables configured (established 8192 bind 8192)
[    0.026552] TCP: reno registered
[    0.026567] UDP hash table entries: 512 (order: 2, 16384 bytes)
[    0.026623] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[    0.026830] NET: Registered protocol family 1
[    0.027219] RPC: Registered named UNIX socket transport module.
[    0.027232] RPC: Registered udp transport module.
[    0.027238] RPC: Registered tcp transport module.
[    0.027244] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    0.028221] futex hash table entries: 512 (order: 3, 32768 bytes)
[    0.028692] bounce pool size: 64 pages
[    0.036501] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[    0.036519] io scheduler noop registered
[    0.036526] io scheduler deadline registered
[    0.036707] io scheduler cfq registered (default)
[    0.038352] sunxi-pinctrl 1c20800.pinctrl: initialized sunXi PIO driver
[    0.079594] Serial: 8250/16550 driver, 8 ports, IRQ sharing disabled
[    0.082002] console [ttyS0] disabled
[    0.102202] 1c28000.serial: ttyS0 at MMIO 0x1c28000 (irq = 33, base_baud = 1500000) is a U6_16550A
[    0.617262] console [ttyS0] enabled
[    0.621977] mousedev: PS/2 mouse device common for all mice
[    0.627799] i2c /dev entries driver
[    0.632658] sunxi-wdt 1c20c90.watchdog: Watchdog enabled (timeout=16 sec, nowayout=0)
[    0.641650] TCP: cubic registered
[    0.644968] NET: Registered protocol family 17
[    0.649528] Registering SWP/SWPB emulation handler
[    0.655237] ahci-5v: 5000 mV 
[    0.658471] usb1-vbus: 5000 mV 
[    0.661885] usb2-vbus: 5000 mV 
~$off
# PYBOOT: Exception: timeout
========================================================================
Board dalmore-multi_lpae_defconfig failure log:
    -------------------------------------------------
[    2.746281] input: NVIDIA Tegra Dalmore Headphones as /devices/soc0/sound.5/sound/card0/input0
[    2.759231] TCP: cubic registered
[    2.762643] NET: Registered protocol family 17
[    2.767705] Key type dns_resolver registered
[    2.773749] ThumbEE CPU extension supported.
[    2.778073] Registering SWP/SWPB emulation handler
[    2.782936] PJ4 iWMMXt coprocessor enabled.
[    2.793880] dvdd_ts: 1800 mV 
[    2.798132] usb1_vbus: 5000 mV 
[    2.801441] usb1_vbus: supplied by vdd-sys-5v0
[    2.807306] usb2_vbus: 5000 mV 
[    2.810604] usb2_vbus: supplied by vdd-sys-5v0
[    2.816389] vdd_hdmi_5v0: 5000 mV 
[    2.819946] vdd_hdmi_5v0: supplied by vdd-sys-5v0
[    2.829530] vdd_cam_1v8_reg: 1800 mV 
[    2.846197] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    2.852939] [drm] No driver support for vblank timestamp query.
[    2.973922] Console: switching to colour frame buffer device 240x75
[    3.060680] host1x drm: fb0:  frame buffer device
[    3.065503] host1x drm: registered panic notifier
[    3.070287] [drm] Initialized tegra 0.0.0 20120330 on minor 0
[    3.078293] platform 7d008000.usb: Driver tegra-ehci requests probe deferral
[    3.089923] tegra-ehci 7d008000.usb: EHCI Host Controller
[    3.095586] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 1
[    3.107356] tegra-ehci 7d008000.usb: irq 129, io mem 0x7d008000
[    3.132258] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.10
[    3.141742] hub 1-0:1.0: USB hub found
[    3.145874] hub 1-0:1.0: 1 port detected
[    3.154890] input: gpio-keys.3 as /devices/soc0/gpio-keys.3/input/input1
[    3.166814] palmas-rtc rtc.8: setting system clock to 2000-01-01 00:00:01 UTC (946684801)
[    3.209873] ALSA device list:
[    3.212933]   #0: NVIDIA Tegra Dalmore
[    3.220595] EXT4-fs (mmcblk0p1): couldn't mount as ext3 due to feature incompatibilities
[    3.230983] EXT4-fs (mmcblk0p1): couldn't mount as ext2 due to feature incompatibilities
[    3.271682] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null)
[    3.280099] VFS: Mounted root (ext4 filesystem) readonly on device 179:1.
[    3.295986] devtmpfs: mounted
[    3.300645] Freeing unused kernel memory: 560K (c0a75000 - c0b01000)
~$off
# PYBOOT: Exception: timeout
========================================================================
Board dalmore-multi_v7_defconfig failure log:
    -------------------------------------------------
[    2.745692] input: NVIDIA Tegra Dalmore Headphones as /devices/soc0/sound.5/sound/card0/input0
[    2.758619] TCP: cubic registered
[    2.761968] NET: Registered protocol family 17
[    2.767059] Key type dns_resolver registered
[    2.773151] ThumbEE CPU extension supported.
[    2.777474] Registering SWP/SWPB emulation handler
[    2.782331] PJ4 iWMMXt coprocessor enabled.
[    2.793285] dvdd_ts: 1800 mV 
[    2.797556] usb1_vbus: 5000 mV 
[    2.800868] usb1_vbus: supplied by vdd-sys-5v0
[    2.806659] usb2_vbus: 5000 mV 
[    2.809976] usb2_vbus: supplied by vdd-sys-5v0
[    2.816003] vdd_hdmi_5v0: 5000 mV 
[    2.819585] vdd_hdmi_5v0: supplied by vdd-sys-5v0
[    2.829136] vdd_cam_1v8_reg: 1800 mV 
[    2.848854] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    2.855553] [drm] No driver support for vblank timestamp query.
[    2.986174] Console: switching to colour frame buffer device 240x75
[    3.073067] host1x drm: fb0:  frame buffer device
[    3.077825] host1x drm: registered panic notifier
[    3.082724] [drm] Initialized tegra 0.0.0 20120330 on minor 0
[    3.090410] platform 7d008000.usb: Driver tegra-ehci requests probe deferral
[    3.102020] tegra-ehci 7d008000.usb: EHCI Host Controller
[    3.107676] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 1
[    3.118513] tegra-ehci 7d008000.usb: irq 129, io mem 0x7d008000
[    3.142508] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.10
[    3.152023] hub 1-0:1.0: USB hub found
[    3.156095] hub 1-0:1.0: 1 port detected
[    3.165143] input: gpio-keys.3 as /devices/soc0/gpio-keys.3/input/input1
[    3.177066] palmas-rtc rtc.8: setting system clock to 2000-01-01 00:00:01 UTC (946684801)
[    3.220003] ALSA device list:
[    3.223086]   #0: NVIDIA Tegra Dalmore
[    3.230874] EXT4-fs (mmcblk0p1): couldn't mount as ext3 due to feature incompatibilities
[    3.241080] EXT4-fs (mmcblk0p1): couldn't mount as ext2 due to feature incompatibilities
[    3.282266] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null)
[    3.290504] VFS: Mounted root (ext4 filesystem) readonly on device 179:1.
[    3.307206] devtmpfs: mounted
[    3.311892] Freeing unused kernel memory: 556K (c0a6e000 - c0af9000)
~$off
# PYBOOT: Exception: timeout
========================================================================
Board hummingboard-multi_v7_defconfig failure log:
    -------------------------------------------------
C1 U-Boot > tftp 0x10800000 mainline/v3.14-12236-g39de65a/multi_v7_defconfig/zImage
tftp 0x10800000 mainline/v3.14-12236-g39de65a/multi_v7_defconfig/zImage
Using FEC device
TFTP from server 172.16.1.3; our IP address is 172.16.1.111
Filename 'mainline/v3.14-12236-g39de65a/multi_v7_defconfig/zImage'.
Load address: 0x10800000
Loading: *#################################################################
     #################################################################
     #################################################################
     #################################################################
     #########################################################
     2 MiB/s
done
Bytes transferred = 4649664 (46f2c0 hex)
C1 U-Boot > setenv serverip 172.16.1.3
setenv serverip 172.16.1.3
C1 U-Boot > tftp 0x11000000 mainline/v3.14-12236-g39de65a/multi_v7_defconfig/dtbs/imx6dl-hummingboard.dtb
tftp 0x11000000 mainline/v3.14-12236-g39de65a/multi_v7_defconfig/dtbs/imx6dl-hummingboard.dtb
Using FEC device
TFTP from server 172.16.1.3; our IP address is 172.16.1.111
Filename 'mainline/v3.14-12236-g39de65a/multi_v7_defconfig/dtbs/imx6dl-hummingboard.dtb'.
Load address: 0x11000000
Loading: *##
     809.6 KiB/s
done
Bytes transferred = 25705 (6469 hex)
C1 U-Boot > printenv bootargs
printenv bootargs
bootargs=console=ttymxc0,115200 root=/dev/mmcblk0p2 rootwait debug earlyprintk
C1 U-Boot > bootz 0x10800000 - 0x11000000
bootz 0x10800000 - 0x11000000
Kernel image @ 0x10800000 [ 0x000000 - 0x46f2c0 ]
## Flattened Device Tree blob at 11000000
   Booting using the fdt blob at 0x11000000
   Using Device Tree in place at 11000000, end 11009468
Starting kernel ...
~$off
# PYBOOT: Exception: timeout
========================================================================
Board omap5uevm-multi_lpae_defconfig failure log:
    -------------------------------------------------
[   46.716570] smps8: 600 <--> 1310 mV at 1040 mV 
[   46.722538] smps9: 2100 mV 
[   46.726347] smps10_out2: 5000 mV 
[   46.730566] smps10_out1: 5000 mV 
[   46.734426] ldo1: 1500 <--> 1800 mV 
[   46.739011] ldo2: 2800 mV 
[   46.743347] ldo3: 1500 mV 
[   46.746791] ldo4: 1500 <--> 1800 mV 
[   46.752038] ldo5: 1800 mV 
[   46.757862] ldo6: 1200 mV 
[   46.761563] ldo7: 2000 mV 
[   46.765894] ldo8: 3000 mV 
[   46.770088] ldo9: 1800 <--> 3000 mV at 900 mV 
[   46.776240] ldoln: 1800 mV 
[   46.780662] ldousb: 3250 mV 
[   46.784165] REGEN1: no parameters
[   46.787714] REGEN2: no parameters
[   46.791416] regen3: no parameters
[   46.795208] SYSEN1: no parameters
[   46.798750] SYSEN2: no parameters
[   47.041353] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz
[   47.048464] omap_i2c 4807c000.i2c: bus 4 rev0.12 at 400 kHz
[   47.055754] omap_hsmmc 4809c000.mmc: pins are not configured from the driver
[   47.101434] /home/build/work/batch/drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
[   47.114927] ALSA device list:
[   47.118058]   No soundcards found.
[   47.122085] Waiting for root device /dev/mmcblk1p2...
[   47.157921] mmc2: host does not support reading read-only switch. assuming write-enable.
[   47.168140] mmc2: new high speed SDHC card at address 0001
[   47.174107] mmcblk1: mmc2:0001 00000 14.6 GiB 
[   47.179573]  mmcblk1: p1 p2
[   47.231580] EXT4-fs (mmcblk1p2): couldn't mount as ext3 due to feature incompatibilities
[   47.240416] EXT4-fs (mmcblk1p2): couldn't mount as ext2 due to feature incompatibilities
[   47.262987] EXT4-fs (mmcblk1p2): mounted filesystem with ordered data mode. Opts: (null)
[   47.271463] VFS: Mounted root (ext4 filesystem) readonly on device 179:50.
[   47.286055] devtmpfs: mounted
[   47.289425] Freeing unused kernel memory: 560K (c0a75000 - c0b01000)
[   47.322552] Internal error: Oops - undefined instruction: 0 [#1] SMP ARM
~$off
# PYBOOT: Exception: timeout
========================================================================
Board omap5uevm-multi_v7_defconfig failure log:
    -------------------------------------------------
[   47.604549] smps8: 600 <--> 1310 mV at 1040 mV 
[   47.610524] smps9: 2100 mV 
[   47.614335] smps10_out2: 5000 mV 
[   47.618544] smps10_out1: 5000 mV 
[   47.622410] ldo1: 1500 <--> 1800 mV 
[   47.627000] ldo2: 2800 mV 
[   47.631325] ldo3: 1500 mV 
[   47.634786] ldo4: 1500 <--> 1800 mV 
[   47.640057] ldo5: 1800 mV 
[   47.645874] ldo6: 1200 mV 
[   47.649549] ldo7: 2000 mV 
[   47.653871] ldo8: 3000 mV 
[   47.658066] ldo9: 1800 <--> 3000 mV at 900 mV 
[   47.664248] ldoln: 1800 mV 
[   47.668653] ldousb: 3250 mV 
[   47.672149] REGEN1: no parameters
[   47.675694] REGEN2: no parameters
[   47.679387] regen3: no parameters
[   47.683182] SYSEN1: no parameters
[   47.686740] SYSEN2: no parameters
[   47.929725] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz
[   47.936804] omap_i2c 4807c000.i2c: bus 4 rev0.12 at 400 kHz
[   47.944074] omap_hsmmc 4809c000.mmc: pins are not configured from the driver
[   47.989812] /home/build/work/batch/drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
[   48.003275] ALSA device list:
[   48.006405]   No soundcards found.
[   48.010431] Waiting for root device /dev/mmcblk1p2...
[   48.046295] mmc2: host does not support reading read-only switch. assuming write-enable.
[   48.056506] mmc2: new high speed SDHC card at address 0001
[   48.062471] mmcblk1: mmc2:0001 00000 14.6 GiB 
[   48.067939]  mmcblk1: p1 p2
[   48.119956] EXT4-fs (mmcblk1p2): couldn't mount as ext3 due to feature incompatibilities
[   48.128799] EXT4-fs (mmcblk1p2): couldn't mount as ext2 due to feature incompatibilities
[   48.151368] EXT4-fs (mmcblk1p2): mounted filesystem with ordered data mode. Opts: (null)
[   48.159847] VFS: Mounted root (ext4 filesystem) readonly on device 179:50.
[   48.174424] devtmpfs: mounted
[   48.177804] Freeing unused kernel memory: 556K (c0a6e000 - c0af9000)
[   48.210923] Internal error: Oops - undefined instruction: 0 [#1] SMP ARM
~$off
# PYBOOT: Exception: timeout
========================================================================
Board panda-multi_v7_defconfig failure log:
    -------------------------------------------------
[    1.764190] VAUX3_6030: 1000 <--> 3000 mV at 1200 mV 
[    1.770233] VMMC: 1200 <--> 3000 mV at 3000 mV 
[    1.775756] VPP: 1800 <--> 2500 mV at 1900 mV 
[    1.781219] VUSIM: 1200 <--> 2900 mV at 1800 mV 
[    1.786193] VDAC: 1800 mV 
[    1.786193] VANA: 2100 mV 
[    1.793518] VCXIO: 1800 mV 
[    1.793518] VUSB: 3300 mV 
[    1.800445] V1V8: 1800 mV 
[    1.803985] V2V1: 2100 mV 
[    1.888946] usb 1-1: new high-speed USB device number 2 using ehci-omap
[    2.042541] omap_i2c 48070000.i2c: bus 0 rev0.11 at 400 kHz
[    2.050598] hub 1-1:1.0: USB hub found
[    2.054840] hub 1-1:1.0: 5 ports detected
[    2.060485] omap_i2c 48072000.i2c: bus 1 rev0.11 at 400 kHz
[    2.070007] omap_i2c 48060000.i2c: bus 2 rev0.11 at 100 kHz
[    2.077789] omap_i2c 48350000.i2c: bus 3 rev0.11 at 400 kHz
[    2.085723] omap_hsmmc 4809c000.mmc: pins are not configured from the driver
[    2.279388] twl_rtc rtc.15: setting system clock to 2000-01-01 00:00:00 UTC (946684800)
[    2.293273] ALSA device list:
[    2.296478]   No soundcards found.
[    2.300628] Waiting for root device /dev/mmcblk0p2...
[    2.305206] mmc0: host does not support reading read-only switch. assuming write-enable.
[    2.307128] mmc0: new high speed SDHC card at address b368
[    2.320343] mmcblk0: mmc0:b368 00000 7.51 GiB 
[    2.326416]  mmcblk0: p1 p2
[    2.335083] omap_hsmmc 480d5000.mmc: card claims to support voltages below defined range
[    2.353240] mmc1: queuing unknown CIS tuple 0x91 (3 bytes)
[    2.359832] mmc1: new SDIO card at address 0001
[    2.365081] usb 1-1.1: new high-speed USB device number 3 using ehci-omap
[    2.430480] EXT4-fs (mmcblk0p2): couldn't mount as ext3 due to feature incompatibilities
[    2.440002] EXT4-fs (mmcblk0p2): couldn't mount as ext2 due to feature incompatibilities
[    2.462432] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
[    2.470947] VFS: Mounted root (ext4 filesystem) readonly on device 179:2.
[    2.486511] devtmpfs: mounted
[    2.489685] Freeing unused kernel memory: 556K (c0a6e000 - c0af9000)
[    2.494140] smsc95xx v1.0.4
[    2.543823] Internal error: Oops - undefined instruction: 0 [#1] SMP ARM
~$off
# PYBOOT: Exception: timeout
========================================================================
Board seaboard-multi_v7_defconfig failure log:
    -------------------------------------------------
[    2.524633] Unable to handle kernel paging request at virtual address 00003aa0
[    2.524637] Unable to handle kernel paging request at virtual address 00003aa0
[    2.524640] Unable to handle kernel paging request at virtual address 00003aa0
[    2.524643] Unable to handle kernel paging request at virtual address 00003aa0
[    2.524647] Unable to handle kernel paging request at virtual address 00003aa0
[    2.524650] Unable to handle kernel paging request at virtual address 00003aa0
[    2.524653] Unable to handle kernel paging request at virtual address 00003aa0
[    2.700634] Alignment trap: not handling instruction e1923f9f at [<c07d2054>]
[    2.707755] Unhandled fault: alignment exception (0x001) at 0x20736eae
[    2.714267] Internal error: : 1 [#2] SMP ARM
[    2.718523] Modules linked in:
[    2.721577] CPU: 0 PID: 29042 Comm:  %s
[    2.721577]  Not tainted 3.14.0-12236-g39de65a #1
[    2.730092] task: c09ab714 ti: ea03a000 task.ti: 70737573
[    2.735491] PC is at _raw_spin_lock_irqsave+0x14/0x4c
[    2.740535] LR is at __down_read_trylock+0x14/0x54
[    2.745316] pc : [<c07d2058>]    lr : [<c027cfb4>]    psr: 40000193
[    2.745316] sp : ea03bee8  ip : c0b06390  fp : ea03bfd0
[    2.756769] r10: 00000028  r9 : 20736eaa  r8 : 0000017c
[    2.761980] r7 : c09ab714  r6 : 00000017  r5 : 20736eae  r4 : 20736eaa
[    2.768491] r3 : 00000193  r2 : 20736eae  r1 : 00000000  r0 : 40000193
[    2.775003] Flags: nZcv  IRQs off  FIQs on  Mode SVC_32  ISA ARM  Segment user
[    2.782209] Control: 10c5387d  Table: 2a4ac04a  DAC: 00000015
[    2.787940] Process  %s
[    2.787940]  (pid: 29042, stack limit = 0x707377c3)
[    2.795233] Stack: (0xea03bee8 to 0x70739573)
[    2.799591] [<c07d2058>] (_raw_spin_lock_irqsave) from [<c027cfb4>] (__down_read_trylock+0x14/0x54)
[    2.808634] [<c027cfb4>] (__down_read_trylock) from [<c0217cd0>] (do_page_fault+0x78/0x27c)
[    2.816974] [<c0217cd0>] (do_page_fault) from [<c02083d4>] (do_DataAbort+0x38/0x98)
[    2.824628] [<c02083d4>] (do_DataAbort) from [<c0212258>] (__dabt_svc+0x38/0x60)
[    2.832005] Exception stack(0xea03bfd0 to 0xea03c018)
[    2.837046] bfc0:                                     0000017c 00000017 ea03c000 00000193
[    2.845209] bfe0: ea03c018 c0217c58 00000017 00000000 0000017c 00404100 ea068000 ea03c0f0
[    2.853370] c000: c0b06390 ea03c018 c02083d4 c0217c84 00000193 ffffffff
[    2.859974] Code: e10f0000 f10c0080 f592f000 e1923f9f (e2831801) 
[    2.866055] ---[ end trace e587eca25db11308 ]---
[    2.870662] Alignment trap: not handling instruction e1923f9f at [<c07d2054>]
[    2.877780] Unhandled fault: alignment exception (0x001) at 0x20736eae
~$off
# PYBOOT: Exception: timeout
========================================================================
Board snowball-multi_v7_defconfig failure log:
    -------------------------------------------------
node: snowball        status: on
*** Unhandled DHCP Option in OFFER/ACK: 28
*** Unhandled DHCP Option in OFFER/ACK: 28
DHCP client bound to address 172.16.1.157
U8500 $ setenv serverip 172.16.1.3
setenv serverip 172.16.1.3
U8500 $ tftp 0x00100000 tmp/snowball-kHvlZp/tmpdEImZM-uImage
tftp 0x00100000 tmp/snowball-kHvlZp/tmpdEImZM-uImage
smc911x: detected LAN9221 controller
smc911x: phy initialized
smc911x: MAC 08:00:08:1e:0f:44
Using smc911x-0 device
TFTP from server 172.16.1.3; our IP address is 172.16.1.157
Filename 'tmp/snowball-kHvlZp/tmpdEImZM-uImage'.
Load address: 0x100000
Loading: *#################################################################
     #################################################################
     #################################################################
     #################################################################
     ############################################################
done
Bytes transferred = 4690977 (479421 hex)
U8500 $ printenv bootargs
printenv bootargs
bootargs=console=ttyAMA2,115200 root=/dev/mmcblk0p4 rootwait rw debug earlyprintk
U8500 $ bootm 0x00100000  
bootm 0x00100000  
## Booting kernel from Legacy Image at 00100000 ...
   Image Name:   Linux
   Image Type:   ARM Linux Kernel Image (uncompressed)
   Data Size:    4690913 Bytes =  4.5 MB
   Load Address: 00008000
   Entry Point:  00008000
   Loading Kernel Image ... OK
OK
Starting kernel ...
~$off
# PYBOOT: Exception: timeout
========================================================================
Board trimslice-multi_v7_defconfig failure log:
    -------------------------------------------------
[    1.688139] tegra-ehci c5008000.usb: EHCI Host Controller
[    1.693576] tegra-ehci c5008000.usb: new USB bus registered, assigned bus number 2
[    1.701429] tegra-ehci c5008000.usb: irq 129, io mem 0xc5008000
[    1.720132] tegra-ehci c5008000.usb: USB 2.0 started, EHCI 1.00
[    1.726894] hub 2-0:1.0: USB hub found
[    1.730712] hub 2-0:1.0: 1 port detected
[    1.738668] tegra-ehci c5000000.usb: EHCI Host Controller
[    1.744105] tegra-ehci c5000000.usb: new USB bus registered, assigned bus number 3
[    1.751938] tegra-ehci c5000000.usb: irq 52, io mem 0xc5000000
[    1.770132] tegra-ehci c5000000.usb: USB 2.0 started, EHCI 1.00
[    1.776915] hub 3-0:1.0: USB hub found
[    1.780766] hub 3-0:1.0: 1 port detected
[    1.785781] input: gpio-keys.2 as /devices/soc0/gpio-keys.2/input/input0
[    1.793148] rtc-em3027 2-0056: setting system clock to 2014-04-09 17:44:43 UTC (1397065483)
[    1.805664] ALSA device list:
[    1.808631]   #0: tegra-trimslice
[    1.812640] Waiting for root device /dev/sda1...
[    2.050170] usb 2-1: new high-speed USB device number 2 using tegra-ehci
[    2.201270] hub 2-1:1.0: USB hub found
[    2.205195] hub 2-1:1.0: 4 ports detected
[    2.380285] usb 3-1: new high-speed USB device number 2 using tegra-ehci
[    2.596799] usb-storage 3-1:1.0: USB Mass Storage device detected
[    2.604201] scsi0 : usb-storage 3-1:1.0
[    2.690531] usb 2-1.1: new high-speed USB device number 3 using tegra-ehci
[    3.153572] asix 2-1.1:1.0 eth1: register 'asix' at usb-c5008000.usb-1.1, ASIX AX88772 USB 2.0 Ethernet, 48:f8:b3:2b:28:b1
[    4.493025] scsi 0:0:0:0: Direct-Access     SanDisk  SSD P4 8GB       0015 PQ: 0 ANSI: 0
[    4.504490] sd 0:0:0:0: [sda] 15649196 512-byte logical blocks: (8.01 GB/7.46 GiB)
[    4.513371] sd 0:0:0:0: [sda] Write Protect is off
[    4.519496] sd 0:0:0:0: [sda] No Caching mode page found
[    4.524889] sd 0:0:0:0: [sda] Assuming drive cache: write through
[    4.537790]  sda: sda1
[    4.545611] sd 0:0:0:0: [sda] Attached SCSI disk
[    4.561693] EXT4-fs (sda1): couldn't mount as ext3 due to feature incompatibilities
[    4.571137] EXT4-fs (sda1): couldn't mount as ext2 due to feature incompatibilities
[    4.608943] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[    4.616728] VFS: Mounted root (ext4 filesystem) on device 8:1.
[    4.637266] devtmpfs: mounted
[    4.641293] Freeing unused kernel memory: 556K (c0a6e000 - c0af9000)
~$off
# PYBOOT: Exception: timeout
========================================================================
Board wandboard-multi_v7_defconfig failure log:
    -------------------------------------------------
tftp 0x10800000 mainline/v3.14-12236-g39de65a/multi_v7_defconfig/zImage
Using FEC device
TFTP from server 172.16.1.3; our IP address is 172.16.1.110
Filename 'mainline/v3.14-12236-g39de65a/multi_v7_defconfig/zImage'.
Load address: 0x10800000
Loading: *#################################################################
     #################################################################
     #################################################################
     #################################################################
     #########################################################
     6.1 MiB/s
done
Bytes transferred = 4649664 (46f2c0 hex)
=> setenv serverip 172.16.1.3
setenv servenode: wandboard       status: on
rip 172.16.1.3
=> tftp 0x11000000 mainline/v3.14-12236-g39de65a/multi_v7_defconfig/dtbs/imx6q-wandboard.dtb
tftp 0x11000000 mainline/v3.14-12236-g39de65a/multi_v7_defconfig/dtbs/imx6q-wandboard.dtb
Using FEC device
TFTP from server 172.16.1.3; our IP address is 172.16.1.110
Filename 'mainline/v3.14-12236-g39de65a/multi_v7_defconfig/dtbs/imx6q-wandboard.dtb'.
Load address: 0x11000000
Loading: *##
     1 MiB/s
done
Bytes transferred = 29143 (71d7 hex)
=>printenv bootargs
 printenv bootargs
bootargs=console=ttymxc0,115200 root=/dev/mmcblk0p2 rootwait debug
=> bootz 0x10800000 - 0x11000000
bootz 0x10800000 - 0x11000000
Kernel image @ 0x10800000 [ 0x000000 - 0x46f2c0 ]
## Flattened Device Tree blob at 11000000
   Booting using the fdt blob at 0x11000000
   Using Device Tree in place at 11000000, end 1100a1d6
Starting kernel ...
~$off
# PYBOOT: Exception: timeout