Automated DT boot report for various ARM defconfigs.

Tree/Branch: arm-soc Git describe: v3.13-rc5-1096-g00b1cb6 Failed boot tests (console logs at the end) =========================================== omap4-panda: FAIL: multi_v7_defconfig omap4-panda-es: FAIL: multi_v7_defconfig

Full Report ===========

omap2plus_defconfig ------------------- am335x-boneblack PASS: 0 min 27.8 sec omap3-beagle-xm PASS: 0 min 59.5 sec am335x-bone PASS: 0 min 31.6 sec omap4-panda PASS: 1 min 9.1 sec omap4-panda-es PASS: 1 min 13.1 sec omap3-tobi,3730storm PASS: 0 min 24.1 sec omap3-tobi,3530overo PASS: 0 min 21.9 sec

tegra_defconfig --------------- tegra30-beaver PASS: 0 min 17.0 sec

imx_v6_v7_defconfig ------------------- imx6dl-wandboard,wand-dual PASS: 0 min 17.0 sec imx6dl-wandboard,wand-solo PASS: 0 min 16.9 sec imx6q-wandboard PASS: 0 min 16.6 sec

sunxi_defconfig --------------- sun7i-a20-cubieboard2 PASS: 0 min 12.1 sec

mvebu_defconfig --------------- armada-xp-openblocks-ax3-4 PASS: 0 min 21.9 sec armada-370-mirabox PASS: 0 min 20.2 sec

exynos_defconfig ---------------- exynos5250-arndale PASS: 0 min 28.8 sec

multi_v7_defconfig ------------------ ste-snowball PASS: 1 min 17.1 sec tegra30-beaver PASS: 0 min 19.4 sec am335x-boneblack PASS: 0 min 25.5 sec omap3-beagle-xm PASS: 0 min 50.3 sec sun7i-a20-cubieboard2 PASS: 0 min 13.5 sec armada-370-mirabox PASS: 0 min 21.4 sec omap4-panda FAIL: 1 min 48.9 sec omap4-panda-es FAIL: 1 min 47.1 sec armada-xp-openblocks-ax3-4 PASS: 0 min 23.8 sec imx6dl-wandboard,wand-solo PASS: 0 min 17.2 sec am335x-bone PASS: 0 min 24.3 sec imx6q-wandboard PASS: 0 min 16.6 sec omap3-tobi,3730storm PASS: 0 min 22.9 sec imx6dl-wandboard,wand-dual PASS: 0 min 17.5 sec omap3-tobi,3530overo PASS: 0 min 20.6 sec

u8500_defconfig --------------- ste-snowball PASS: 0 min 28.3 sec

sama5_defconfig --------------- sama5d35ek PASS: 0 min 19.1 sec

Console logs for failures =========================

multi_v7_defconfig ------------------

omap4-panda: FAIL: last 24 lines of boot log: ---------------------------------------------

[ 1.801635] usb 1-1: new high-speed USB device number 2 using ehci-omap [ 1.932647] omap_i2c 48070000.i2c: bus 0 rev0.10 at 400 kHz [ 1.940551] omap_i2c 48072000.i2c: bus 1 rev0.10 at 400 kHz [ 1.951354] omap_i2c 48060000.i2c: bus 2 rev0.10 at 100 kHz [ 1.958892] hub 1-1:1.0: USB hub found [ 1.962951] hub 1-1:1.0: 5 ports detected [ 1.968566] omap_i2c 48350000.i2c: bus 3 rev0.10 at 400 kHz [ 1.975280] omap-dma-engine 4a056000.dma-controller: allocating channel for 62 [ 1.982879] omap-dma-engine 4a056000.dma-controller: allocating channel for 61 [ 1.990661] 4809c000.mmc supply vmmc_aux not found, using dummy regulator [ 1.999267] omap_hsmmc 4809c000.mmc: pins are not configured from the driver [ 2.058105] omap-dma-engine 4a056000.dma-controller: allocating channel for 60 [ 2.065765] omap-dma-engine 4a056000.dma-controller: allocating channel for 59 [ 2.073425] 480d5000.mmc supply vmmc_aux not found, using dummy regulator [ 2.113586] mmc0: host does not support reading read-only switch. assuming write-enable. [ 2.124267] mmc0: new high speed SD card at address f3c2 [ 2.124267] isa bounce pool size: 16 pages [ 2.134704] mmcblk0: mmc0:f3c2 SD02G 1.84 GiB [ 2.141204] mmcblk0: p1 p2 [ 10.452117] [sched_delayed] sched: RT throttling activated ~$off # PYBOOT: Exception: kernel: ERROR: failed to boot: <class 'pexpect.TIMEOUT'> # PYBOOT: Time: 108.89 seconds. # PYBOOT: Result: FAIL

omap4-panda-es: FAIL: last 24 lines of boot log: ------------------------------------------------

[ 1.562499] Power Management for TI OMAP4. [ 1.566802] OMAP4 PM: u-boot >= v2012.07 is required for full PM support [ 1.573944] Registering SWP/SWPB emulation handler [ 1.579803] vwl1271: 1800 mV [ 1.586639] Skipping twl internal clock init and using bootloader value (unknown osc rate) [ 1.596008] twl 0-0048: PIH (irq 39) nested IRQs [ 1.602294] twl_rtc rtc.11: Enabling TWL-RTC [ 1.609130] twl_rtc rtc.11: rtc core: registered rtc.11 as rtc0 [ 1.615997] VAUX1_6030: 1000 <--> 3000 mV at 2800 mV [ 1.621978] VAUX2_6030: 1200 <--> 2800 mV at 1800 mV [ 1.627960] VAUX3_6030: 1000 <--> 3000 mV at 1200 mV [ 1.633972] VMMC: 1200 <--> 3000 mV at 3000 mV [ 1.639404] VPP: 1800 <--> 2500 mV at 1900 mV [ 1.644744] VUSIM: 1200 <--> 2900 mV at 1800 mV [ 1.649780] VDAC: 1800 mV [ 1.649780] VANA: 2100 mV [ 1.656829] VCXIO: 1800 mV [ 1.656829] VUSB: 3300 mV [ 1.663604] V1V8: 1800 mV [ 1.667144] V2V1: 2100 mV ~$off # PYBOOT: Exception: kernel: ERROR: failed to boot: <class 'pexpect.TIMEOUT'> # PYBOOT: Time: 107.09 seconds. # PYBOOT: Result: FAIL