Failed boards:
beaver multi_v7_defconfig : FAILED 1:26.83 capri bcm_defconfig : FAILED 1:25.20 capri multi_v7_defconfig : FAILED 1:26.50 cubox multi_v7_defconfig : FAILED 1:35.66 dalmore multi_v7_defconfig : FAILED 1:34.12 dalmore multi_lpae_defconfig : FAILED 1:30.68 hummingboard multi_v7_defconfig : FAILED 1:28.60 jetson multi_v7_defconfig : FAILED 1:28.64 jetson multi_lpae_defconfig : FAILED 1:28.66 seaboard multi_v7_defconfig : FAILED 0:35.35 snowball u8500_defconfig : FAILED 1:44.35 wandboard multi_v7_defconfig : FAILED 1:36.70
Successful boards:
apc vt8500_v6_v7_defconfig : passed 1:12.15 arndale exynos_defconfig : passed 1:19.36 arndale multi_v7_defconfig : passed 1:27.82 arndale multi_lpae_defconfig : passed 1:23.54 bbb omap2plus_defconfig : passed 1:29.67 bbb multi_v7_defconfig : passed 1:26.40 beaver tegra_defconfig : passed 0:52.80 cubie sunxi_defconfig : passed 1:16.15 cubie multi_v7_defconfig : passed 1:40.24 cubie2 sunxi_defconfig : warnings 1:06.31 cubie2 multi_v7_defconfig : warnings 1:27.75 cubie2 multi_lpae_defconfig : warnings 1:24.56 dalmore tegra_defconfig : passed 1:21.70 hummingboard imx_v6_v7_defconfig : warnings 1:12.08 jetson tegra_defconfig : passed 0:58.86 omap5uevm omap2plus_defconfig : warnings 1:03.24 omap5uevm multi_v7_defconfig : warnings 2:04.28 omap5uevm multi_lpae_defconfig : warnings 1:59.68 panda omap2plus_defconfig : warnings 1:36.40 panda multi_v7_defconfig : warnings 1:46.63 sama5 sama5_defconfig : warnings 2:00.45 seaboard tegra_defconfig : passed 1:10.02 snow exynos_defconfig : passed 0:58.79 snow multi_v7_defconfig : passed 1:00.46 snow multi_lpae_defconfig : passed 1:00.60 snowball multi_v7_defconfig : passed 3:17.73 trimslice tegra_defconfig : passed 2:15.27 trimslice multi_v7_defconfig : passed 0:54.66 wandboard imx_v6_v7_defconfig : passed 1:11.66
Offline boards:
Board legend is available at http://arm-soc.lixom.net/boards.html
Last entries of failed logs below:
========================================================================
Board beaver-multi_v7_defconfig failure log: -------------------------------------------------
[ 3.590781] pci 0000:01:00.0: BAR 0: assigned [io 0x1000-0x10ff] [ 3.596875] pci 0000:00:01.0: PCI bridge to [bus 01] [ 3.601839] pci 0000:00:01.0: bridge window [io 0x1000-0x1fff] [ 3.607931] pci 0000:00:01.0: bridge window [mem 0x28000000-0x280fffff 64bit pref] [ 3.615682] pci 0000:00:01.0: nv_msi_ht_cap_quirk didn't locate host bridge [ 3.622789] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 3.628385] r8169 0000:01:00.0: enabling device (0140 -> 0143) [ 3.634771] r8169 0000:01:00.0 eth0: RTL8168evl/8111evl at 0xf001e000, 02:04:4b:01:60:99, XID 0c900800 IRQ 472 [ 3.644768] r8169 0000:01:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko] [ 3.655297] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 3.661925] [drm] No driver support for vblank timestamp query. [ 3.667876] host1x drm: No connectors reported connected with modes [ 3.674142] [drm] Cannot find any crtc or sizes - going 1024x768 [ 3.698038] Console: switching to colour frame buffer device 128x48 [ 3.709773] host1x drm: fb0: frame buffer device [ 3.714469] host1x drm: registered panic notifier [ 3.733636] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 3.739908] platform 7d004000.usb: Driver tegra-ehci requests probe deferral [ 3.747367] platform 7d008000.usb: Driver tegra-ehci requests probe deferral [ 3.758871] tegra-ehci 7d004000.usb: EHCI Host Controller [ 3.764276] tegra-ehci 7d004000.usb: new USB bus registered, assigned bus number 1 [ 3.772069] tegra-ehci 7d004000.usb: irq 53, io mem 0x7d004000 [ 3.783243] tegra-ehci 7d004000.usb: USB 2.0 started, EHCI 1.00 [ 3.789584] hub 1-0:1.0: USB hub found [ 3.793361] hub 1-0:1.0: 1 port detected [ 3.797738] tegra-ehci 7d008000.usb: EHCI Host Controller [ 3.803157] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 2 [ 3.810913] tegra-ehci 7d008000.usb: irq 129, io mem 0x7d008000 [ 3.823624] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.00 [ 3.829914] hub 2-0:1.0: USB hub found [ 3.833686] hub 2-0:1.0: 1 port detected [ 3.841649] tps65910-rtc tps65910-rtc: setting system clock to 2000-01-01 00:00:02 UTC (946684802) [ 3.854460] usb1_vbus: disabling [ 3.857869] ALSA device list: [ 3.860865] #0: NVIDIA Tegra Beaver [ 3.865106] Waiting for root device /dev/mmcblk0p1... [ 4.143647] usb 2-1: new high-speed USB device number 2 using tegra-ehci [ 4.612394] asix 2-1:1.0 eth1: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 58:6d:8f:50:ba:18 ~$off # PYBOOT: Exception: timeout
========================================================================
Board capri-bcm_defconfig failure log: -------------------------------------------------
[ 0.460000] iosr1: 1800 mV [ 0.460000] iosr2: at 1800 mV [ 0.470000] msr: at 1120 mV [ 0.470000] sdsr1: at 1240 mV [ 0.470000] sdsr2: at 1240 mV [ 0.480000] vsr: at 1240 mV [ 0.480000] gpldo1: at 1200 mV [ 0.480000] gpldo2: at 3300 mV [ 0.490000] gpldo3: at 1200 mV [ 0.490000] gpldo4: at 1800 mV [ 0.490000] gpldo5: at 1200 mV [ 0.500000] gpldo6: at 2500 mV [ 0.500000] : no parameters [ 0.500000] : Failed to create debugfs directory [ 0.510000] bcm-kona-i2c 3500d000.i2c: device registered successfully [ 0.510000] sdhci: Secure Digital Host Controller Interface driver [ 0.520000] sdhci: Copyright(c) Pierre Ossman [ 0.520000] TCP: cubic registered [ 0.520000] NET: Registered protocol family 10 [ 0.530000] sit: IPv6 over IPv4 tunneling driver [ 0.530000] NET: Registered protocol family 17 [ 0.530000] NET: Registered protocol family 15 [ 0.540000] ThumbEE CPU extension supported. [ 0.540000] gpldo6: disabling [ 0.550000] gpldo5: disabling [ 0.550000] gpldo4: disabling [ 0.550000] gpldo3: disabling [ 0.560000] gpldo2: disabling [ 0.560000] gpldo1: disabling [ 0.560000] vsr: disabling [ 0.570000] sdsr2: disabling [ 0.570000] sdsr1: disabling [ 0.570000] msr: disabling [ 0.580000] iosr2: disabling [ 0.580000] csr: disabling [ 0.580000] mmcldo2: disabling [ 0.590000] mmcldo1: disabling [ 0.590000] Waiting for root device /dev/mmcblk0p8... ~$off # PYBOOT: Exception: timeout
========================================================================
Board capri-multi_v7_defconfig failure log: -------------------------------------------------
[ 0.545000] ehci-omap: OMAP-EHCI Host Controller driver [ 0.550000] ehci-orion: EHCI orion driver [ 0.550000] SPEAr-ehci: EHCI SPEAr driver [ 0.555000] tegra-ehci: Tegra EHCI driver [ 0.555000] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.560000] ohci-pci: OHCI PCI platform driver [ 0.560000] ohci-platform: OHCI generic platform driver [ 0.565000] ohci-omap3: OHCI OMAP3 driver [ 0.565000] SPEAr-ohci: OHCI SPEAr driver [ 0.570000] usbcore: registered new interface driver usb-storage [ 0.575000] mousedev: PS/2 mouse device common for all mice [ 0.580000] i2c /dev entries driver [ 0.585000] bcm-kona-i2c 3e016000.i2c: device registered successfully [ 0.590000] bcm-kona-i2c 3e017000.i2c: device registered successfully [ 0.595000] bcm-kona-i2c 3e018000.i2c: device registered successfully [ 0.600000] bcm-kona-i2c 3500d000.i2c: device registered successfully [ 0.605000] usbcore: registered new interface driver uvcvideo [ 0.610000] USB Video Class driver (1.1.1) [ 0.610000] gspca_main: v2.14.0 registered [ 0.615000] sdhci: Secure Digital Host Controller Interface driver [ 0.620000] sdhci: Copyright(c) Pierre Ossman [ 0.620000] Synopsys Designware Multimedia Card Interface Driver [ 0.625000] usbcore: registered new interface driver usbhid [ 0.630000] usbhid: USB HID core driver [ 0.635000] TCP: cubic registered [ 0.635000] NET: Registered protocol family 17 [ 0.640000] can: controller area network core (rev 20120528 abi 9) [ 0.645000] NET: Registered protocol family 29 [ 0.645000] can: raw protocol (rev 20120528) [ 0.650000] can: broadcast manager protocol (rev 20120528 t) [ 0.655000] can: netlink gateway (rev 20130117) max_hops=1 [ 0.660000] Key type dns_resolver registered [ 0.660000] ThumbEE CPU extension supported. [ 0.665000] Registering SWP/SWPB emulation handler [ 0.670000] /home/build/work/batch/drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 0.675000] ALSA device list: [ 0.675000] No soundcards found. [ 0.680000] Waiting for root device /dev/mmcblk0p8... ~$off # PYBOOT: Exception: timeout
========================================================================
Board cubox-multi_v7_defconfig failure log: -------------------------------------------------
[ 1.226121] hub 2-0:1.0: 1 port detected [ 1.230496] SPEAr-ehci: EHCI SPEAr driver [ 1.234605] tegra-ehci: Tegra EHCI driver [ 1.238734] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.244915] ohci-pci: OHCI PCI platform driver [ 1.249415] ohci-platform: OHCI generic platform driver [ 1.254729] ohci-omap3: OHCI OMAP3 driver [ 1.258826] SPEAr-ohci: OHCI SPEAr driver [ 1.263554] usbcore: registered new interface driver usb-storage [ 1.271081] mousedev: PS/2 mouse device common for all mice [ 1.278056] rtc-mv f10d8500.real-time-clock: rtc core: registered f10d8500.real-time- as rtc0 [ 1.287390] i2c /dev entries driver [ 1.292871] usbcore: registered new interface driver uvcvideo [ 1.298624] USB Video Class driver (1.1.1) [ 1.302726] gspca_main: v2.14.0 registered [ 1.309988] orion_wdt: Initial timeout 25 sec [ 1.315527] sdhci: Secure Digital Host Controller Interface driver [ 1.321690] sdhci: Copyright(c) Pierre Ossman [ 1.326623] Synopsys Designware Multimedia Card Interface Driver [ 1.333324] usbcore: registered new interface driver usbhid [ 1.338884] usbhid: USB HID core driver [ 1.346712] TCP: cubic registered [ 1.350025] NET: Registered protocol family 17 [ 1.354493] can: controller area network core (rev 20120528 abi 9) [ 1.360734] NET: Registered protocol family 29 [ 1.365161] can: raw protocol (rev 20120528) [ 1.369433] can: broadcast manager protocol (rev 20120528 t) [ 1.375086] can: netlink gateway (rev 20130117) max_hops=1 [ 1.380962] Key type dns_resolver registered [ 1.385434] ThumbEE CPU extension supported. [ 1.389699] Registering SWP/SWPB emulation handler [ 1.394488] PJ4 iWMMXt v2 coprocessor enabled. [ 1.399197] ata1: SATA link down (SStatus 0 SControl F300) [ 1.405686] USB Power: 5000 mV [ 1.409193] rtc-mv f10d8500.real-time-clock: setting system clock to 2014-06-16 04:06:58 UTC (1402891618) [ 1.419713] ALSA device list: [ 1.422689] No soundcards found. [ 1.426613] Waiting for root device /dev/mmcblk0p2... ~$off # PYBOOT: Exception: timeout
========================================================================
Board dalmore-multi_lpae_defconfig failure log: -------------------------------------------------
[ 2.975235] i2c 0-004c: Driver lm90 requests probe deferral [ 2.982639] tegra-dsi 54300000.dsi: cannot get VDD supply [ 2.988243] platform 54300000.dsi: Driver tegra-dsi requests probe deferral [ 2.998186] tegra-hdmi 54280000.hdmi: failed to get PLL regulator [ 3.004650] platform 54280000.hdmi: Driver tegra-hdmi requests probe deferral [ 3.015047] tegra-ehci 7d008000.usb: EHCI Host Controller [ 3.020674] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 1 [ 3.030624] tegra-ehci 7d008000.usb: irq 129, io mem 0x7d008000 [ 3.047117] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.10 [ 3.056628] hub 1-0:1.0: USB hub found [ 3.060791] hub 1-0:1.0: 1 port detected [ 3.067073] i2c 0-004c: Driver lm90 requests probe deferral [ 3.074510] tegra-dsi 54300000.dsi: cannot get VDD supply [ 3.080137] platform 54300000.dsi: Driver tegra-dsi requests probe deferral [ 3.090163] tegra-hdmi 54280000.hdmi: failed to get PLL regulator [ 3.096670] platform 54280000.hdmi: Driver tegra-hdmi requests probe deferral [ 3.108686] input: gpio-keys as /devices/soc0/gpio-keys/input/input1 [ 3.117129] i2c 0-004c: Driver lm90 requests probe deferral [ 3.122817] palmas-rtc 7000d000.i2c:tps65913@58:rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800) [ 3.159240] VDD_5V0_HDMI_CON: disabling [ 3.163199] vdd_cam_1v8_reg: disabling [ 3.167381] vdd_hdmi_5v0: disabling [ 3.170913] usb1_vbus: disabling [ 3.174269] dvdd_ts: disabling [ 3.181590] tegra-dsi 54300000.dsi: cannot get VDD supply [ 3.182339] ALSA device list: [ 3.182355] #0: NVIDIA Tegra Dalmore [ 3.194027] platform 54300000.dsi: Driver tegra-dsi requests probe deferral [ 3.196992] tegra-hdmi 54280000.hdmi: failed to get PLL regulator [ 3.197233] platform 54280000.hdmi: Driver tegra-hdmi requests probe deferral [ 3.217043] Waiting for root device /dev/mmcblk0p1... [ 3.387257] usb 1-1: new high-speed USB device number 2 using tegra-ehci [ 3.870535] asix 1-1:1.0 eth0: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 48:f8:b3:2b:29:1f [ 3.882450] i2c 0-004c: Driver lm90 requests probe deferral [ 3.889965] tegra-dsi 54300000.dsi: cannot get VDD supply [ 3.895600] platform 54300000.dsi: Driver tegra-dsi requests probe deferral [ 3.905435] tegra-hdmi 54280000.hdmi: failed to get PLL regulator [ 3.911940] platform 54280000.hdmi: Driver tegra-hdmi requests probe deferral ~$off # PYBOOT: Exception: timeout
========================================================================
Board dalmore-multi_v7_defconfig failure log: -------------------------------------------------
[ 2.960630] i2c 0-004c: Driver lm90 requests probe deferral [ 2.968115] tegra-dsi 54300000.dsi: cannot get VDD supply [ 2.973724] platform 54300000.dsi: Driver tegra-dsi requests probe deferral [ 2.983724] tegra-hdmi 54280000.hdmi: failed to get PLL regulator [ 2.990187] platform 54280000.hdmi: Driver tegra-hdmi requests probe deferral [ 3.000529] tegra-ehci 7d008000.usb: EHCI Host Controller [ 3.006176] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 1 [ 3.016150] tegra-ehci 7d008000.usb: irq 129, io mem 0x7d008000 [ 3.032368] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.10 [ 3.041729] hub 1-0:1.0: USB hub found [ 3.045741] hub 1-0:1.0: 1 port detected [ 3.051775] i2c 0-004c: Driver lm90 requests probe deferral [ 3.059059] tegra-dsi 54300000.dsi: cannot get VDD supply [ 3.064606] platform 54300000.dsi: Driver tegra-dsi requests probe deferral [ 3.074557] tegra-hdmi 54280000.hdmi: failed to get PLL regulator [ 3.080990] platform 54280000.hdmi: Driver tegra-hdmi requests probe deferral [ 3.092671] input: gpio-keys as /devices/soc0/gpio-keys/input/input1 [ 3.100867] i2c 0-004c: Driver lm90 requests probe deferral [ 3.108536] palmas-rtc 7000d000.i2c:tps65913@58:rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800) [ 3.108707] tegra-dsi 54300000.dsi: cannot get VDD supply [ 3.108788] platform 54300000.dsi: Driver tegra-dsi requests probe deferral [ 3.111786] tegra-hdmi 54280000.hdmi: failed to get PLL regulator [ 3.112156] platform 54280000.hdmi: Driver tegra-hdmi requests probe deferral [ 3.181850] VDD_5V0_HDMI_CON: disabling [ 3.185822] vdd_cam_1v8_reg: disabling [ 3.190036] vdd_hdmi_5v0: disabling [ 3.193744] usb1_vbus: disabling [ 3.197063] dvdd_ts: disabling [ 3.202270] ALSA device list: [ 3.205297] #0: NVIDIA Tegra Dalmore [ 3.211613] Waiting for root device /dev/mmcblk0p1... [ 3.397448] usb 1-1: new high-speed USB device number 2 using tegra-ehci [ 3.881101] asix 1-1:1.0 eth0: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 48:f8:b3:2b:29:1f [ 3.892759] i2c 0-004c: Driver lm90 requests probe deferral [ 3.900289] tegra-dsi 54300000.dsi: cannot get VDD supply [ 3.905922] platform 54300000.dsi: Driver tegra-dsi requests probe deferral [ 3.915754] tegra-hdmi 54280000.hdmi: failed to get PLL regulator [ 3.922153] platform 54280000.hdmi: Driver tegra-hdmi requests probe deferral ~$off # PYBOOT: Exception: timeout
========================================================================
Board hummingboard-multi_v7_defconfig failure log: -------------------------------------------------
[ 1.161951] usbcore: registered new interface driver usb-storage [ 1.173098] ci_hdrc ci_hdrc.0: doesn't support gadget [ 1.178309] ci_hdrc ci_hdrc.0: EHCI Host Controller [ 1.183257] ci_hdrc ci_hdrc.0: new USB bus registered, assigned bus number 1 [ 1.195792] ci_hdrc ci_hdrc.0: USB 2.0 started, EHCI 1.00 [ 1.201990] hub 1-0:1.0: USB hub found [ 1.205805] hub 1-0:1.0: 1 port detected [ 1.213487] ci_hdrc ci_hdrc.1: doesn't support gadget [ 1.218590] ci_hdrc ci_hdrc.1: EHCI Host Controller [ 1.223516] ci_hdrc ci_hdrc.1: new USB bus registered, assigned bus number 2 [ 1.235803] ci_hdrc ci_hdrc.1: USB 2.0 started, EHCI 1.00 [ 1.241956] hub 2-0:1.0: USB hub found [ 1.245751] hub 2-0:1.0: 1 port detected [ 1.250497] mousedev: PS/2 mouse device common for all mice [ 1.258756] i2c /dev entries driver [ 1.263479] usbcore: registered new interface driver uvcvideo [ 1.269259] USB Video Class driver (1.1.1) [ 1.273383] gspca_main: v2.14.0 registered [ 1.280201] sdhci: Secure Digital Host Controller Interface driver [ 1.286413] sdhci: Copyright(c) Pierre Ossman [ 1.291622] Synopsys Designware Multimedia Card Interface Driver [ 1.298626] usbcore: registered new interface driver usbhid [ 1.304228] usbhid: USB HID core driver [ 1.312878] TCP: cubic registered [ 1.316246] NET: Registered protocol family 17 [ 1.320720] can: controller area network core (rev 20120528 abi 9) [ 1.326980] NET: Registered protocol family 29 [ 1.331456] can: raw protocol (rev 20120528) [ 1.335741] can: broadcast manager protocol (rev 20120528 t) [ 1.341434] can: netlink gateway (rev 20130117) max_hops=1 [ 1.347332] Key type dns_resolver registered [ 1.351779] ThumbEE CPU extension supported. [ 1.356093] Registering SWP/SWPB emulation handler [ 1.362048] /home/build/work/batch/drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 1.377248] ALSA device list: [ 1.380231] No soundcards found. [ 1.384328] Waiting for root device /dev/mmcblk0p2... [ 60.320916] imx-sdma 20ec000.sdma: firmware not found ~$off # PYBOOT: Exception: timeout
========================================================================
Board jetson-multi_lpae_defconfig failure log: -------------------------------------------------
[ 2.248699] hub 1-0:1.0: USB hub found [ 2.252530] hub 1-0:1.0: 1 port detected [ 2.257547] platform 7d008000.usb: Driver tegra-ehci requests probe deferral [ 2.265993] +1.05V_RUN_AVDD_HDMI_PLL: 1050 mV [ 2.270544] +1.05V_RUN_AVDD_HDMI_PLL: supplied by +1.05V_RUN [ 2.278469] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 2.285126] [drm] No driver support for vblank timestamp query. [ 2.291117] host1x drm: No connectors reported connected with modes [ 2.297414] [drm] Cannot find any crtc or sizes - going 1024x768 [ 2.312363] Console: switching to colour frame buffer device 128x48 [ 2.325882] host1x drm: fb0: frame buffer device [ 2.330614] host1x drm: registered panic notifier [ 2.346926] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 2.353496] tegra-ehci 7d008000.usb: EHCI Host Controller [ 2.358934] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 2 [ 2.366745] tegra-ehci 7d008000.usb: irq 129, io mem 0x7d008000 [ 2.381914] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.10 [ 2.388720] hub 2-0:1.0: USB hub found [ 2.392531] hub 2-0:1.0: 1 port detected [ 2.397633] input: gpio-keys as /devices/soc0/gpio-keys/input/input1 [ 2.404964] as3722-rtc as3722-rtc: setting system clock to 2000-02-01 00:00:18 UTC (949363218) [ 2.422948] +1.05V_RUN_AVDD_HDMI_PLL: disabling [ 2.427497] +1.8V_RUN_VPP_FUSE: disabling [ 2.431914] +2.8V_RUN_CAM_AF: disabling [ 2.436096] +3.3V_RUN_TOUCH: disabling [ 2.440217] +1.05V_RUN_CAM_REAR: disabling [ 2.444683] +VDDIO_SDMMC3: disabling [ 2.448408] +1.2V_RUN_CAM_FRONT: disabling [ 2.452632] +2.8V_RUN_CAM: disabling [ 2.456322] +1.8V_RUN_CAM: disabling [ 2.460026] +1.05V_RUN: disabling [ 2.463473] +USB0_VBUS_SW: disabling [ 2.467058] +3.3V_AVDD_HDMI_AP_GATED: disabling [ 2.471928] ALSA device list: [ 2.474890] #0: NVIDIA Tegra Jetson TK1 [ 2.479508] Waiting for root device /dev/mmcblk0p1... [ 2.701899] usb 2-1: new high-speed USB device number 2 using tegra-ehci [ 3.164491] asix 2-1:1.0 eth0: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 68:7f:74:ba:ef:28 ~$off # PYBOOT: Exception: timeout
========================================================================
Board jetson-multi_v7_defconfig failure log: -------------------------------------------------
[ 2.243779] hub 1-0:1.0: USB hub found [ 2.247609] hub 1-0:1.0: 1 port detected [ 2.252595] platform 7d008000.usb: Driver tegra-ehci requests probe deferral [ 2.261040] +1.05V_RUN_AVDD_HDMI_PLL: 1050 mV [ 2.265590] +1.05V_RUN_AVDD_HDMI_PLL: supplied by +1.05V_RUN [ 2.273518] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 2.280171] [drm] No driver support for vblank timestamp query. [ 2.286162] host1x drm: No connectors reported connected with modes [ 2.292458] [drm] Cannot find any crtc or sizes - going 1024x768 [ 2.307526] Console: switching to colour frame buffer device 128x48 [ 2.321034] host1x drm: fb0: frame buffer device [ 2.325766] host1x drm: registered panic notifier [ 2.341961] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 2.348526] tegra-ehci 7d008000.usb: EHCI Host Controller [ 2.353962] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 2 [ 2.361840] tegra-ehci 7d008000.usb: irq 129, io mem 0x7d008000 [ 2.376980] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.10 [ 2.383779] hub 2-0:1.0: USB hub found [ 2.387592] hub 2-0:1.0: 1 port detected [ 2.392690] input: gpio-keys as /devices/soc0/gpio-keys/input/input1 [ 2.400036] as3722-rtc as3722-rtc: setting system clock to 2000-02-01 00:00:21 UTC (949363221) [ 2.418110] +1.05V_RUN_AVDD_HDMI_PLL: disabling [ 2.422657] +1.8V_RUN_VPP_FUSE: disabling [ 2.427072] +2.8V_RUN_CAM_AF: disabling [ 2.431254] +3.3V_RUN_TOUCH: disabling [ 2.435371] +1.05V_RUN_CAM_REAR: disabling [ 2.439615] +VDDIO_SDMMC3: disabling [ 2.443320] +1.2V_RUN_CAM_FRONT: disabling [ 2.447542] +2.8V_RUN_CAM: disabling [ 2.451234] +1.8V_RUN_CAM: disabling [ 2.454937] +1.05V_RUN: disabling [ 2.458382] +USB0_VBUS_SW: disabling [ 2.461966] +3.3V_AVDD_HDMI_AP_GATED: disabling [ 2.466834] ALSA device list: [ 2.469797] #0: NVIDIA Tegra Jetson TK1 [ 2.474413] Waiting for root device /dev/mmcblk0p1... [ 2.696968] usb 2-1: new high-speed USB device number 2 using tegra-ehci [ 3.159762] asix 2-1:1.0 eth0: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 68:7f:74:ba:ef:28 ~$off # PYBOOT: Exception: timeout
========================================================================
Board seaboard-multi_v7_defconfig failure log: -------------------------------------------------
[ 2.120565] tegra-ehci c5000000.usb: USB 2.0 started, EHCI 1.00 [ 2.127180] hub 3-0:1.0: USB hub found [ 2.130982] hub 3-0:1.0: 1 port detected [ 2.135998] input: gpio-keys as /devices/soc0/gpio-keys/input/input4 [ 2.143024] tps6586x-rtc tps6586x-rtc: setting system clock to 2014-06-16 04:07:53 UTC (1402891673) [ 2.155645] vdd_1v2: disabling [ 2.158863] vdd_1v5: disabling [ 2.221969] ALSA device list: [ 2.224938] #0: NVIDIA Tegra Seaboard [ 2.229406] VFS: Cannot open root device "mmcblk0p3" or unknown-block(0,0): error -6 [ 2.237159] Please append a correct "root=" boot option; here are the available partitions: [ 2.245517] Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(0,0) [ 2.253768] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 3.15.0-next-20140616 #1 [ 2.260916] [<c02160fc>] (unwind_backtrace) from [<c0211c68>] (show_stack+0x10/0x14) [ 2.268659] [<c0211c68>] (show_stack) from [<c0813db0>] (dump_stack+0x88/0x98) [ 2.275873] [<c0813db0>] (dump_stack) from [<c0810bf0>] (panic+0xa0/0x218) [ 2.282739] [<c0810bf0>] (panic) from [<c0adb0c4>] (mount_block_root+0x1a0/0x230) [ 2.290209] [<c0adb0c4>] (mount_block_root) from [<c0adb25c>] (mount_root+0x108/0x110) [ 2.298112] [<c0adb25c>] (mount_root) from [<c0adb3bc>] (prepare_namespace+0x158/0x1a0) [ 2.306102] [<c0adb3bc>] (prepare_namespace) from [<c0adad80>] (kernel_init_freeable+0x1cc/0x1dc) [ 2.314958] [<c0adad80>] (kernel_init_freeable) from [<c080eee8>] (kernel_init+0x8/0xf0) [ 2.323038] [<c080eee8>] (kernel_init) from [<c020e7b8>] (ret_from_fork+0x14/0x3c) [ 2.330594] CPU1: stopping [ 2.333297] CPU: 1 PID: 0 Comm: swapper/1 Not tainted 3.15.0-next-20140616 #1 [ 2.340431] [<c02160fc>] (unwind_backtrace) from [<c0211c68>] (show_stack+0x10/0x14) [ 2.348168] [<c0211c68>] (show_stack) from [<c0813db0>] (dump_stack+0x88/0x98) [ 2.355380] [<c0813db0>] (dump_stack) from [<c021490c>] (handle_IPI+0x148/0x174) [ 2.362763] [<c021490c>] (handle_IPI) from [<c0208934>] (gic_handle_irq+0x64/0x68) [ 2.370319] [<c0208934>] (gic_handle_irq) from [<c02127c0>] (__irq_svc+0x40/0x50) [ 2.377783] Exception stack(0xea087f68 to 0xea087fb0) [ 2.382824] 7f60: 00000000 c0bc3fb4 c0bc3fb4 0000004c 8ae12190 00000000 [ 2.390985] 7f80: 8ae1f868 00000000 eafb6db0 ea086000 00000000 c0821050 00000015 ea087fb0 [ 2.399144] 7fa0: c06b3e9c c06b3ea8 60000113 ffffffff [ 2.404194] [<c02127c0>] (__irq_svc) from [<c06b3ea8>] (cpuidle_enter_state+0x68/0x100) [ 2.412193] [<c06b3ea8>] (cpuidle_enter_state) from [<c027f2a8>] (cpu_startup_entry+0x1ec/0x210) [ 2.420964] [<c027f2a8>] (cpu_startup_entry) from [<00208a84>] (0x208a84) [ 2.427736] drm_kms_helper: panic occurred, switching back to text console [ 2.434619] ---[ end Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(0,0) ~$off # PYBOOT: Exception: panic
========================================================================
Board snowball-u8500_defconfig failure log: -------------------------------------------------
[ 3.627502] platform musb-hdrc.22.auto: Driver musb-hdrc requests probe deferral [ 3.635406] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.22.auto [ 3.647338] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.22.auto) status -22 [ 3.654663] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.666137] musb-ux500 musb-hdrc.22.auto: Error applying setting, reverse things back [ 3.674652] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.23.auto [ 3.686584] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.23.auto) status -22 [ 3.693908] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.705383] musb-hdrc musb-hdrc.23.auto: Error applying setting, reverse things back [ 3.713195] HS USB OTG: no transceiver configured [ 3.717895] musb-hdrc musb-hdrc.23.auto: musb_init_controller failed with status -517 [ 3.725738] platform musb-hdrc.23.auto: Driver musb-hdrc requests probe deferral [ 3.733673] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.23.auto [ 3.745605] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.23.auto) status -22 [ 3.752899] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.764404] musb-ux500 musb-hdrc.23.auto: Error applying setting, reverse things back [ 3.772918] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.24.auto [ 3.784851] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.24.auto) status -22 [ 3.792144] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.803649] musb-hdrc musb-hdrc.24.auto: Error applying setting, reverse things back [ 3.811462] HS USB OTG: no transceiver configured [ 3.816162] musb-hdrc musb-hdrc.24.auto: musb_init_controller failed with status -517 [ 3.824005] platform musb-hdrc.24.auto: Driver musb-hdrc requests probe deferral [ 3.831909] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.24.auto [ 3.843841] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.24.auto) status -22 [ 3.851165] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.862640] musb-ux500 musb-hdrc.24.auto: Error applying setting, reverse things back [ 3.871185] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.25.auto [ 3.883117] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.25.auto) status -22 [ 3.890411] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.901885] musb-hdrc musb-hdrc.25.auto: Error applying setting, reverse things back [ 3.909698] HS USB OTG: no transceiver configured [ 3.914428] musb-hdrc musb-hdrc.25.auto: musb_init_controller failed with status -517 [ 3.922271] platform musb-hdrc.25.auto: Driver musb-hdrc requests probe deferral [ 3.930175] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.25.auto [ 3.942108] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.25.auto) status -22 [ 3.949401] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.960876] musb-ux500 musb-hdrc.25.auto: Error applying setting, reverse things back ~$off # PYBOOT: Exception: timeout
========================================================================
Board wandboard-multi_v7_defconfig failure log: -------------------------------------------------
[ 1.065076] ohci-platform: OHCI generic platform driver [ 1.070474] ohci-omap3: OHCI OMAP3 driver [ 1.074642] SPEAr-ohci: OHCI SPEAr driver [ 1.079460] usbcore: registered new interface driver usb-storage [ 1.090473] ci_hdrc ci_hdrc.0: doesn't support gadget [ 1.095553] ci_hdrc ci_hdrc.0: no supported roles [ 1.100382] 2184200.usb supply vbus not found, using dummy regulator [ 1.110483] ci_hdrc ci_hdrc.1: doesn't support gadget [ 1.115567] ci_hdrc ci_hdrc.1: EHCI Host Controller [ 1.120484] ci_hdrc ci_hdrc.1: new USB bus registered, assigned bus number 1 [ 1.132816] ci_hdrc ci_hdrc.1: USB 2.0 started, EHCI 1.00 [ 1.139017] hub 1-0:1.0: USB hub found [ 1.142827] hub 1-0:1.0: 1 port detected [ 1.147538] mousedev: PS/2 mouse device common for all mice [ 1.155675] i2c /dev entries driver [ 1.160368] usbcore: registered new interface driver uvcvideo [ 1.166142] USB Video Class driver (1.1.1) [ 1.170266] gspca_main: v2.14.0 registered [ 1.177047] sdhci: Secure Digital Host Controller Interface driver [ 1.183253] sdhci: Copyright(c) Pierre Ossman [ 1.188459] Synopsys Designware Multimedia Card Interface Driver [ 1.195419] usbcore: registered new interface driver usbhid [ 1.201018] usbhid: USB HID core driver [ 1.209356] TCP: cubic registered [ 1.212696] NET: Registered protocol family 17 [ 1.217189] can: controller area network core (rev 20120528 abi 9) [ 1.223441] NET: Registered protocol family 29 [ 1.227914] can: raw protocol (rev 20120528) [ 1.232198] can: broadcast manager protocol (rev 20120528 t) [ 1.237887] can: netlink gateway (rev 20130117) max_hops=1 [ 1.243766] Key type dns_resolver registered [ 1.248515] ThumbEE CPU extension supported. [ 1.252827] Registering SWP/SWPB emulation handler [ 1.258724] /home/build/work/batch/drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 1.273914] ALSA device list: [ 1.276899] No soundcards found. [ 1.280882] Waiting for root device /dev/mmcblk0p2... [ 60.322935] imx-sdma 20ec000.sdma: firmware not found ~$off # PYBOOT: Exception: timeout
kernel-build-reports@lists.linaro.org