Full logs are available at http://arm-soc.lixom.net/bootlogs/next/next-20150408/

Failed boards:

minnowmax x86-minnowmax_defconfig : FAILED 0:57.80 pi arm-exynos_defconfig : FAILED 0:30.80 pit arm-exynos_defconfig : FAILED 0:33.32 seaboard arm-tegra_defconfig : FAILED 1:49.78 seaboard arm-multi_v7_defconfig : FAILED 2:01.43 snowball arm-u8500_defconfig : FAILED 3:10.36 socfpga arm-multi_v7_defconfig : FAILED 3:04.48 wandboard arm-multi_v7_defconfig : FAILED 2:57.90

Successful boards:

apc arm-vt8500_v6_v7_defconfig : passed 1:21.03 arndale arm-exynos_defconfig : passed 1:30.55 bbb arm-omap2plus_defconfig : passed 1:45.15 bbb arm-multi_v7_defconfig : passed 1:13.83 beaver arm-tegra_defconfig : passed 0:58.28 beaver arm-multi_v7_defconfig : passed 0:57.86 capri arm-bcm_defconfig : passed 0:39.64 capri arm-multi_v7_defconfig : passed 0:43.53 chitra powerpc-pasemi_defconfig : passed 1:15.01 chitra powerpc-ppc64_defconfig : warnings 2:07.09 colombus arm-sunxi_defconfig : passed 0:58.42 colombus arm-multi_v7_defconfig : passed 1:23.55 colombus arm-multi_lpae_defconfig : passed 1:07.65 cosmic arm-imx_v6_v7_defconfig : passed 2:03.25 cosmic arm-multi_v7_defconfig : passed 1:28.36 cubie arm-sunxi_defconfig : passed 1:00.92 cubie arm-multi_v7_defconfig : passed 1:10.06 cubie2 arm-sunxi_defconfig : passed 0:58.71 cubie2 arm-multi_v7_defconfig : passed 1:11.70 cubie2 arm-multi_lpae_defconfig : passed 1:10.49 cubox arm-multi_v7_defconfig : passed 1:13.60 cubox arm-mvebu_v7_defconfig : passed 1:22.08 dalmore arm-tegra_defconfig : passed 1:27.06 dalmore arm-multi_v7_defconfig : passed 1:22.44 dalmore arm-multi_lpae_defconfig : passed 1:32.15 hummingboard arm-imx_v6_v7_defconfig : passed 1:25.33 hummingboard arm-multi_v7_defconfig : passed 1:16.99 jetsontk1 arm-tegra_defconfig : passed 0:55.35 jetsontk1 arm-multi_v7_defconfig : passed 1:00.17 jetsontk1 arm-multi_lpae_defconfig : passed 1:12.38 odroidu3 arm-exynos_defconfig : passed 0:58.11 omap5uevm arm-omap2plus_defconfig : passed 1:06.68 omap5uevm arm-multi_v7_defconfig : passed 1:07.93 omap5uevm arm-multi_lpae_defconfig : passed 1:33.44 pandaes arm-omap2plus_defconfig : warnings 1:47.15 pandaes arm-multi_v7_defconfig : passed 1:55.36 pi arm-multi_v7_defconfig : passed 0:50.67 pi arm-multi_lpae_defconfig : passed 0:59.81 pit arm-multi_v7_defconfig : passed 0:51.00 pit arm-multi_lpae_defconfig : passed 1:05.90 rk3288evb arm-multi_v7_defconfig : passed 1:03.54 rk3288evb arm-multi_lpae_defconfig : passed 0:47.73 sama5 arm-sama5_defconfig : passed 1:20.39 snow arm-exynos_defconfig : passed 1:01.32 snowball arm-multi_v7_defconfig : warnings 2:18.57 socfpga arm-socfpga_defconfig : passed 1:09.09 trimslice arm-tegra_defconfig : passed 1:03.48 trimslice arm-multi_v7_defconfig : passed 0:56.20 wandboard arm-imx_v6_v7_defconfig : passed 1:08.29

Offline boards:

arndale arm-multi_v7_defconfig : OFFLINE 1:13.50 arndale arm-multi_lpae_defconfig : OFFLINE 1:21.25 parallella arm-multi_v7_defconfig : OFFLINE 1:25.68 snow arm-multi_v7_defconfig : OFFLINE 0:46.89 snow arm-multi_lpae_defconfig : OFFLINE 0:49.89

Board legend is available at http://arm-soc.lixom.net/boards.html

Board minnowmax-x86-minnowmax_defconfig failure log: -------------------------------------------------

Connected to minnowmax console [channel connected] (~$quit to exit) ~$open

~$hardreset

Command(minnowmax console)> open console already open

Command(minnowmax console)> hardreset (user:build) Reset target node minnowmax status: off node minnowmax status: on

[PYBOOT] [minnowmax 00:54]: Timed out waiting for "<type 'str'>":

[PYBOOT] [minnowmax 00:55]: got exception: timeout ~$off

[PYBOOT] [minnowmax 00:56]: Done. Board pi-arm-exynos_defconfig failure log: -------------------------------------------------

[ 3.520528] exynos-dp 145b0000.dp-controller: Link Training success! [ 3.570821] Console: switching to colour frame buffer device 274x77 [ 3.643023] exynos-drm exynos-drm: fb0: frame buffer device [ 3.648660] exynos-drm exynos-drm: registered panic notifier [ 3.667964] [drm] Initialized exynos 1.0.0 20110530 on minor 0 [ 3.672895] input: gpio-keys as /devices/platform/gpio-keys/input/input2 [ 3.680623] max77802-rtc max77802-rtc: hctosys: unable to read the hardware clock [ 3.706663] TPS65090_RAILSLDO2: disabling [ 3.709243] TPS65090_RAILSLDO1: disabling [ 3.713207] TPS65090_RAILSDCDC3: disabling [ 3.717300] vdd_1v2_2: disabling [ 3.721200] ALSA device list: [ 3.723438] No soundcard[ 3.728089] EXT3-fs (mmcblk0p1): error: couldn't mount because of unsupported optional features (240) [ 3.736259] EXT2-fs (mmcblk0p1): error: couldn't mount because of unsupported optional features (240) [ 3.748717] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null) [ 3.755455] VFS: Mounted root (ext4 filesystem) readonly on device 179:1. [ 3.764480] devtmpfs: mounted [ 3.766166] Freeing unused kernel memory: 348K (c0733000 - c078a000)

[PYBOOT] [pi 00:28]: kernel: finished booting, starting userspace. [ 3.776419] Unhandled fault: imprecise external abort (0x1406) at 0x00000000 [ 3.781979] pgd = ed320000 [ 3.784669] [00000000] *pgd=6d291831, *pte=00000000, *ppte=00000000 [ 3.798013] Kernel panic - not syncing: Attempted to kill init! exitcode=0x00000007 [ 3.798013] [ 3.805656] CPU: 0 PID: 1 Comm: init Not tainted 4.0.0-rc7-next-20150408 #1 [ 3.812593] Hardware name: SAMSUNG EXYNOS (Flattened Device Tree) [ 3.818684] [<c001546c>] (unwind_backtrace) from [<c0012374>] (show_stack+0x10/0x14) [ 3.826395] [<c0012374>] (show_stack) from [<c05235ac>] (dump_stack+0x84/0xc4) [ 3.833591] [<c05235ac>] (dump_stack) from [<c0521c18>] (panic+0x9c/0x200) [ 3.840444] [<c0521c18>] (panic) from [<c00248f0>] (complete_and_exit+0x0/0x1c) [ 3.847729] [<c00248f0>] (complete_and_exit) from [<00000000>] ( (null)) [ 3.854495] drm_kms_helper: panic occurred, switching back to text console [ 3.861373] ---[ end Kernel panic - not syncing: Attempted to kill init! exitcode=0x00000007 [ 3.861373]

[PYBOOT] [pi 00:29]: got exception: panic ~$off

[PYBOOT] [pi 00:30]: Done. Board pit-arm-exynos_defconfig failure log: -------------------------------------------------

[ 3.829037] Console: switching to colour frame buffer device 195x54 [ 3.895626] exynos-drm exynos-drm: fb0: frame buffer device [ 3.901263] exynos-drm exynos-drm: registered panic notifier [ 3.918036] [drm] Initialized exynos 1.0.0 20110530 on minor 0 [ 3.922968] input: gpio-keys as /devices/platform/gpio-keys/input/input2 [ 3.930693] max77802-rtc max77802-rtc: hctosys: unable to read the hardware clock [ 3.955846] TPS65090_RAILSLDO2: disabling [ 3.958401] TPS65090_RAILSLDO1: disabling [ 3.962372] TPS65090_RAILSDCDC3: disabling [ 3.966505] vdd_1v2_2: disabling [ 3.970369] ALSA device list: [ 3.972603] No soundcardã[ 3.977301] EXT3-fs (mmcblk0p1): error: couldn't mount because of unsupported optional features (240) [ 3.985522] EXT2-fs (mmcblk0p1): error: couldn't mount because of unsupported optional features (240) [ 3.998397] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null) [ 4.005134] VFS: Mounted root (ext4 filesystem) readonly on device 179:1. [ 4.014101] devtmpfs: mounted [ 4.015785] Freeing unused kernel memory: 348K (c0733000 - c078a000) [ 4.023044] vdd_1v8: operation not allowed

[PYBOOT] [pit 00:30]: kernel: finished booting, starting userspace. [ 4.028140] Unhandled fault: imprecise external abort (0x1406) at 0x00000000 [ 4.033698] pgd = ed308000 [ 4.036387] [00000000] *pgd=6d2e4831, *pte=00000000, *ppte=00000000 [ 4.048084] Kernel panic - not syncing: Attempted to kill init! exitcode=0x00000007 [ 4.048084] [ 4.055726] CPU: 0 PID: 1 Comm: init Not tainted 4.0.0-rc7-next-20150408 #1 [ 4.062664] Hardware name: SAMSUNG EXYNOS (Flattened Device Tree) [ 4.068754] [<c001546c>] (unwind_backtrace) from [<c0012374>] (show_stack+0x10/0x14) [ 4.076466] [<c0012374>] (show_stack) from [<c05235ac>] (dump_stack+0x84/0xc4) [ 4.083661] [<c05235ac>] (dump_stack) from [<c0521c18>] (panic+0x9c/0x200) [ 4.090515] [<c0521c18>] (panic) from [<c00248f0>] (complete_and_exit+0x0/0x1c) [ 4.097800] [<c00248f0>] (complete_and_exit) from [<00000000>] ( (null)) [ 4.104565] drm_kms_helper: panic occurred, switching back to text console [ 4.111443] ---[ end Kernel panic - not syncing: Attempted to kill init! exitcode=0x00000007 [ 4.111443]

[PYBOOT] [pit 00:31]: got exception: panic ~$off

[PYBOOT] [pit 00:32]: Done. Board seaboard-arm-multi_v7_defconfig failure log: -------------------------------------------------

[ 1.715980] mmc2: new high speed MMC card at address 0001 [ 1.722133] mmcblk0: mmc2:0001 MMC08G 7.45 GiB [ 1.726807] mmcblk0boot0: mmc2:0001 MMC08G partition 1 512 KiB [ 1.732779] mmcblk0boot1: mmc2:0001 MMC08G partition 2 512 KiB [ 1.739711] mmcblk0: p3 [ 1.796988] mmc0: queuing unknown CIS tuple 0x80 (50 bytes) [ 1.810767] mmc0: queuing unknown CIS tuple 0x80 (7 bytes) [ 1.819217] mmc0: queuing unknown CIS tuple 0x80 (7 bytes) [ 1.832185] mmc0: queuing unknown CIS tuple 0x80 (19 bytes) [ 1.839570] input: NVIDIA Tegra Seaboard Headphone Jack as /devices/soc0/sound/sound/card0/input2 [ 1.848891] input: NVIDIA Tegra Seaboard Mic Jack as /devices/soc0/sound/sound/card0/input3 [ 1.858636] NET: Registered protocol family 17 [ 1.863119] can: controller area network core (rev 20120528 abi 9) [ 1.869387] NET: Registered protocol family 29 [ 1.873857] can: raw protocol (rev 20120528) [ 1.878139] can: broadcast manager protocol (rev 20120528 t) [ 1.883810] can: netlink gateway (rev 20130117) max_hops=1 [ 1.889772] Key type dns_resolver registered [ 1.891612] mmc0: queuing unknown CIS tuple 0x02 (1 bytes) [ 1.895544] mmc0: new SDIO card at address 0001 [ 1.904448] ThumbEE CPU extension supported. [ 1.908748] Registering SWP/SWPB emulation handler [ 1.920035] tegra-dc 54200000.dc: failed to probe RGB output: -517 [ 1.927456] 54280000.hdmi supply hdmi not found, using dummy regulator [ 1.938615] utmi_phy_clk_enable: timeout waiting for phy to stabilize [ 1.945084] tegra-ehci c5000000.usb: EHCI Host Controller [ 1.950521] tegra-ehci c5000000.usb: new USB bus registered, assigned bus number 3 [ 1.958325] tegra-ehci c5000000.usb: irq 287, io mem 0xc5000000 [ 1.972600] tegra-ehci c5000000.usb: USB 2.0 started, EHCI 1.00 [ 1.979440] hub 3-0:1.0: USB hub found [ 1.983264] hub 3-0:1.0: 1 port detected [ 1.991456] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 1.998099] [drm] No driver support for vblank timestamp query.

[PYBOOT] [seaboard 01:58]: Timed out waiting for "<type 'str'>":

[PYBOOT] [seaboard 01:59]: got exception: timeout ~$off

[PYBOOT] [seaboard 02:00]: Done. Board seaboard-arm-tegra_defconfig failure log: -------------------------------------------------

[ 1.747226] NET: Registered protocol family 29 [ 1.751721] can: raw protocol (rev 20120528) [ 1.756072] can: broadcast manager protocol (rev 20120528 t) [ 1.761820] can: netlink gateway (rev 20130117) max_hops=1 [ 1.767815] Bluetooth: RFCOMM socket layer initialized [ 1.773061] Bluetooth: RFCOMM ver 1.11 [ 1.776886] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 1.782290] Bluetooth: BNEP socket layer initialized [ 1.787285] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 1.793302] Bluetooth: HIDP socket layer initialized [ 1.798565] mmc0: new SDIO card at address 0001 [ 1.800170] Registering SWP/SWPB emulation handler [ 1.819837] tegra-dc 54200000.dc: failed to probe RGB output: -517 [ 1.826670] 54280000.hdmi supply hdmi not found, using dummy regulator [ 1.837913] utmi_phy_clk_enable: timeout waiting for phy to stabilize [ 1.844432] tegra-ehci c5000000.usb: EHCI Host Controller [ 1.849905] tegra-ehci c5000000.usb: new USB bus registered, assigned bus number 3 [ 1.858089] tegra-ehci c5000000.usb: irq 287, io mem 0xc5000000 [ 1.882014] tegra-ehci c5000000.usb: USB 2.0 started, EHCI 1.00 [ 1.891640] hub 3-0:1.0: USB hub found [ 1.895498] hub 3-0:1.0: 1 port detected [ 1.909900] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 1.916549] [drm] No driver support for vblank timestamp query. [ 1.982874] Console: switching to colour frame buffer device 170x48 [ 2.002901] drm drm: fb0: frame buffer device [ 2.007336] drm drm: registered panic notifier [ 2.041991] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 2.049190] input: gpio-keys as /devices/soc0/gpio-keys/input/input4 [ 2.057247] tps6586x-rtc tps6586x-rtc: setting system clock to 2015-04-08 11:27:08 UTC (1428492428) [ 2.076555] vdd_1v2: disabling [ 2.079614] vdd_1v5: disabling [ 2.083138] ALSA device list: [ 2.086107] #0: NVIDIA Tegra Seaboard

[PYBOOT] [seaboard 01:47]: Timed out waiting for "<type 'str'>":

[PYBOOT] [seaboard 01:48]: got exception: timeout ~$off

[PYBOOT] [seaboard 01:49]: Done. Board snowball-arm-u8500_defconfig failure log: -------------------------------------------------

[....] Starting the hotplug events dispatcher: udevd[ 3.944732] udevd[1075]: starting version 175 [?25l[?1c7[ ok 8[?25h[?0c. [....] Synthesizing the initial hotplug events...[?25l[?1c7[ ok 8[?25h[?0cdone. [....] Waiting for /dev to be fully populated...[ 4.561035] cfg80211: Calling CRDA to update world regulatory domain [ 6.172973] mmci-pl18x 80114000.sdi4_per2: error during DMA transfer! [ 6.179718] mmcblk0rpmb: error -110 transferring data, sector 0, nr 8, cmd response 0x900, card status 0x0 [ 6.189575] mmc2: tried to reset card [ 6.193328] mmcblk0rpmb: retrying using single block read [ 6.694396] mmci-pl18x 80114000.sdi4_per2: error during DMA transfer! [ 6.701141] mmcblk0rpmb: error -110 transferring data, sector 24, nr 8, cmd response 0x900, card status 0x0 [ 6.711090] mmc2: tried to reset card [ 6.714752] mmcblk0rpmb: retrying using single block read [ 7.216064] mmci-pl18x 80114000.sdi4_per2: error during DMA transfer! [ 7.222808] mmcblk0rpmb: error -110 transferring data, sector 8, nr 8, cmd response 0x900, card status 0x0 [ 7.232635] mmc2: tried to reset card [ 7.236358] mmcblk0rpmb: retrying using single block read [ 7.449859] mmci-pl18x 80114000.sdi4_per2: error during DMA transfer! [ 7.456634] mmcblk0rpmb: error -110 transferring data, sector 56, nr 8, cmd response 0x900, card status 0x0 [ 7.466552] mmc2: tried to reset card [ 7.470245] mmcblk0rpmb: retrying using single block read [ 7.685363] mmci-pl18x 80114000.sdi4_per2: error during DMA transfer! [ 7.692108] mmcblk0rpmb: error -110 transferring data, sector 120, nr 8, cmd response 0x900, card status 0x0 [ 7.702117] mmc2: tried to reset card [ 7.705780] mmcblk0rpmb: retrying using single block read [ 7.721038] cfg80211: Calling CRDA to update world regulatory domain [ 7.920349] mmci-pl18x 80114000.sdi4_per2: error during DMA transfer! [ 7.927215] mmcblk0rpmb: error -110 transferring data, sector 64, nr 8, cmd response 0x900, card status 0x0 [ 7.937133] mmc2: tried to reset card [ 7.940826] mmcblk0rpmb: retrying using single block read [ 8.155975] mmci-pl18x 80114000.sdi4_per2: error during DMA transfer! [ 8.162689] mmcblk0rpmb: error -110 transferring data, sector 16, nr 8, cmd response 0x900, card status 0x0 [ 8.172607] mmc2: tried to reset card [ 8.176269] mmcblk0rpmb: retrying using single block read

[PYBOOT] [snowball 03:07]: Timed out waiting for "<type 'str'>":

[PYBOOT] [snowball 03:08]: got exception: timeout ~$off

[PYBOOT] [snowball 03:09]: Done. Board socfpga-arm-multi_v7_defconfig failure log: -------------------------------------------------

[ 1.192673] dw_mmc ff704000.dwmmc0: Version ID is 240a [ 1.197832] dw_mmc ff704000.dwmmc0: DW MMC controller at irq 30, 32 bit host data width, 1024 deep fifo [ 1.207327] dw_mmc ff704000.dwmmc0: Got CD GPIO [ 1.237437] dw_mmc ff704000.dwmmc0: 1 slots initialized [ 1.243163] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.249670] ledtrig-cpu: registered to indicate activity on CPUs [ 1.255832] usbcore: registered new interface driver usbhid [ 1.261393] usbhid: USB HID core driver [ 1.267131] usbcore: registered new interface driver snd-usb-audio [ 1.275128] NET: Registered protocol family 17 [ 1.279589] can: controller area network core (rev 20120528 abi 9) [ 1.285818] NET: Registered protocol family 29 [ 1.290262] can: raw protocol (rev 20120528) [ 1.294529] can: broadcast manager protocol (rev 20120528 t) [ 1.300179] can: netlink gateway (rev 20130117) max_hops=1 [ 1.305966] Key type dns_resolver registered [ 1.310338] ThumbEE CPU extension supported. [ 1.314612] Registering SWP/SWPB emulation handler [ 1.321326] rtc-ds1307 0-0068: setting system clock to 2000-01-01 00:00:22 UTC (946684822) [ 1.331423] ALSA device list: [ 1.334412] No soundcards found. [ 1.338470] Waiting for root device /dev/mmcblk0p2... [ 1.368688] mmc_host mmc0: Bus speed (slot 0) = 200000000Hz (slot req 50000000Hz, actual 50000000HZ div = 2) [ 1.378545] mmc0: new high speed SDHC card at address 0002 [ 1.384324] mmcblk0: mmc0:0002 SD8GB 7.43 GiB [ 1.391286] mmcblk0: p1 p2 p3 [ 1.449166] EXT4-fs (mmcblk0p2): mounting ext3 file system using the ext4 subsystem [ 1.487129] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null) [ 1.495233] VFS: Mounted root (ext3 filesystem) readonly on device 179:2. [ 1.528985] devtmpfs: mounted [ 1.532588] Freeing unused kernel memory: 820K (c0d89000 - [PYBOOT] [socfpga 00:31]: kernel: finished booting, starting userspace. c0e56000)

[PYBOOT] [socfpga 03:01]: Timed out waiting for "<type 'str'>":

[PYBOOT] [socfpga 03:02]: got exception: timeout ~$off

[PYBOOT] [socfpga 03:03]: Done. Board wandboard-arm-multi_v7_defconfig failure log: -------------------------------------------------

[....] Cleaning up temporary files...[?25l[?1c7[ ok 8[?25h[?0c. [....] Setting kernel variables ...[?25l[?1c7[ ok 8[?25h[?0cdone. [ 6.015840] random: dd urandom read with 46 bits of entropy available [....] Configuring network interfaces...Internet Systems Consortium DHCP Client 4.2.2 Copyright 2004-2011 Internet Systems Consortium. All rights reserved. For info, please visit https://www.isc.org/software/dhcp/

[ 6.458232] fec 2188000.ethernet eth0: Freescale FEC PHY driver [Atheros 8031 ethernet] (mii_bus:phy_addr=2188000.ethernet:01, irq=-1) Listening on LPF/eth0/00:1f:7b:b4:05:0e Sending on LPF/eth0/00:1f:7b:b4:05:0e Sending on Socket/fallback DHCPREQUEST on eth0 to 255.255.255.255 port 67 [ 10.458165] fec 2188000.ethernet eth0: Link is Up - 1Gbps/Full - flow control off DHCPREQUEST on eth0 to 255.255.255.255 port 67 DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 6 DHCPREQUEST on eth0 to 255.255.255.255 port 67 DHCPOFFER from 172.16.1.1 DHCPACK from 172.16.1.1 bound to 172.16.1.149 -- renewal in 1789 seconds. [?25l[?1c7[ ok 8[?25h[?0cdone. [....] Cleaning up temporary files...[?25l[?1c7[ ok 8[?25h[?0c. INIT: Entering runlevel: 2 [info] Using makefile-style concurrent boot in runlevel 2. [....] Starting enhanced syslogd: rsyslogd[?25l[?1c7[ ok 8[?25h[?0c. [....] Starting web server: apache2apache2: apr_sockaddr_info_get() failed for wandboard apache2: Could not reliably determine the server's fully qualified domain name, using 127.0.0.1 for ServerName [?25l[?1c7[ ok 8[?25h[?0c. [....] Starting periodic command scheduler: cron[?25l[?1c7[ ok 8[?25h[?0c. [....] Loading cpufreq kernel modules...[?25l[?1c7[ ok 8[?25h[?0cdone (none). [....] Starting system message bus: dbus[?25l[?1c7[ ok 8[?25h[?0c. [....] CPUFreq Utilities: Setting ondemand CPUFreq governor...disabled, governor not available...[?25l[?1c7[ ok 8[?25h[?0cdone. [....] Starting OpenBSD Secure Shell server: sshd[?25l[?1c7[ ok 8[?25h[?0c.

[PYBOOT] [wandboard 02:55]: Timed out waiting for "<type 'str'>":

[PYBOOT] [wandboard 02:56]: got exception: timeout ~$off

[PYBOOT] [wandboard 02:57]: Done.