Full logs are available at http://arm-soc.lixom.net/bootlogs/next/next-20160229/
Failed boards:
arndale arm-multi_v7_nosmp_defconfig : FAILED 22:46.82 colombus arm-multi_v7_defconfig : FAILED 3:48.27 colombus arm-multi_lpae_defconfig : FAILED 3:11.03 colombus arm-multi_v7_nosmp_defconfig : FAILED 3:20.49 cosmic arm-imx_v6_v7_defconfig : FAILED 2:03.75 cosmic arm-multi_v7_defconfig : FAILED 2:36.32 cosmic arm-multi_v7_nosmp_defconfig : FAILED 2:16.63 minnowmax minnowmax_defconfig : NO BUILD omap5uevm arm-multi_v7_defconfig : FAILED 2:08.01 omap5uevm arm-multi_lpae_defconfig : FAILED 2:15.06 omap5uevm arm-multi_v7_nosmp_defconfig : FAILED 2:35.47 pi arm-exynos_defconfig : FAILED 1:46.93 pi arm-multi_v7_defconfig : FAILED 2:00.29 pi arm-multi_lpae_defconfig : FAILED 2:25.39 pit arm-exynos_defconfig : FAILED 1:48.43 snow arm-multi_v7_nosmp_defconfig : FAILED 3:16.01 snowball arm-u8500_defconfig : FAILED 1:13.50 snowball arm-multi_v7_defconfig : FAILED 3:30.61 snowball arm-multi_v7_nosmp_defconfig : FAILED 1:17.13
Successful boards:
apc arm-vt8500_v6_v7_defconfig : passed 1:27.75 arndale arm-exynos_defconfig : passed 1:32.04 arndale arm-multi_v7_defconfig : passed 2:02.11 arndale arm-multi_lpae_defconfig : passed 2:30.38 bbb arm-omap2plus_defconfig : passed 1:46.94 bbb arm-multi_v7_defconfig : passed 1:38.16 beagleboard-x15 arm-omap2plus_defconfig : passed 0:49.72 beagleboard-x15 arm-multi_v7_defconfig : passed 0:41.87 beagleboard-x15 arm-multi_lpae_defconfig : passed 0:57.23 beagleboard-x15 arm-multi_v7_nosmp_defconfig : warnings 1:07.42 beaver arm-tegra_defconfig : passed 1:51.87 beaver arm-multi_v7_defconfig : passed 1:51.31 beaver arm-multi_v7_nosmp_defconfig : warnings 1:45.74 capri arm-bcm_defconfig : passed 1:00.89 capri arm-multi_v7_defconfig : passed 1:13.85 capri arm-multi_v7_nosmp_defconfig : warnings 0:54.10 chitra powerpc-pasemi_defconfig : passed 2:52.38 chitra powerpc-ppc64_defconfig : passed 2:01.07 colibri-vf61 arm-imx_v6_v7_defconfig : warnings 1:39.63 colibri-vf61 arm-multi_v7_defconfig : passed 1:26.60 colibri-vf61 arm-multi_v7_nosmp_defconfig : passed 1:58.62 cubie arm-sunxi_defconfig : passed 0:55.67 cubie arm-multi_v7_defconfig : passed 0:57.38 cubie arm-multi_v7_nosmp_defconfig : passed 0:59.55 cubie2 arm-sunxi_defconfig : passed 1:02.05 cubie2 arm-multi_v7_defconfig : passed 1:04.28 cubie2 arm-multi_lpae_defconfig : passed 1:10.34 cubie2 arm-multi_v7_nosmp_defconfig : warnings 0:56.28 cubox arm-multi_v7_defconfig : passed 1:35.76 cubox arm-mvebu_v7_defconfig : passed 1:29.38 cubox arm-multi_v7_nosmp_defconfig : passed 1:09.52 dalmore arm-tegra_defconfig : passed 1:24.00 dalmore arm-multi_v7_defconfig : passed 1:40.43 dalmore arm-multi_lpae_defconfig : passed 1:49.34 dalmore arm-multi_v7_nosmp_defconfig : warnings 1:46.90 hummingboard arm-imx_v6_v7_defconfig : passed 1:46.45 hummingboard arm-multi_v7_defconfig : passed 1:26.18 hummingboard arm-multi_v7_nosmp_defconfig : warnings 1:12.42 jetsontk1 arm-tegra_defconfig : passed 1:33.20 jetsontk1 arm-multi_v7_defconfig : passed 1:37.73 odroidu3 arm-exynos_defconfig : warnings 3:56.88 omap5uevm arm-omap2plus_defconfig : passed 1:04.52 pandaes arm-omap2plus_defconfig : warnings 1:43.66 pandaes arm-multi_v7_defconfig : passed 1:48.46 pandaes arm-multi_v7_nosmp_defconfig : warnings 2:06.06 parallella arm-multi_v7_defconfig : passed 2:58.07 parallella arm-multi_v7_nosmp_defconfig : warnings 2:40.69 pi arm-multi_v7_nosmp_defconfig : warnings 1:48.52 pit arm-multi_v7_defconfig : passed 1:49.23 pit arm-multi_lpae_defconfig : passed 2:01.47 pit arm-multi_v7_nosmp_defconfig : warnings 1:53.22 seaboard arm-tegra_defconfig : passed 1:03.19 seaboard arm-multi_v7_defconfig : passed 1:19.52 seaboard arm-multi_v7_nosmp_defconfig : warnings 1:42.10 seattle arm64-defconfig : warnings 2:35.01 snow arm-exynos_defconfig : passed 2:18.66 snow arm-multi_v7_defconfig : passed 2:16.69 snow arm-multi_lpae_defconfig : passed 2:00.47 socfpga arm-socfpga_defconfig : passed 1:10.88 socfpga arm-multi_v7_nosmp_defconfig : warnings 1:09.27 trimslice arm-tegra_defconfig : passed 1:33.71 trimslice arm-multi_v7_defconfig : passed 3:24.26 trimslice arm-multi_v7_nosmp_defconfig : warnings 1:44.49 wandboard arm-imx_v6_v7_defconfig : passed 1:21.34 wandboard arm-multi_v7_defconfig : passed 1:17.00 wandboard arm-multi_v7_nosmp_defconfig : warnings 1:33.54
Offline boards:
bbb arm-multi_v7_nosmp_defconfig : OFFLINE 2:02.13 colombus arm-sunxi_defconfig : OFFLINE 1:00.88 jetsontk1 arm-multi_lpae_defconfig : OFFLINE 3:08.71 jetsontk1 arm-multi_v7_nosmp_defconfig : OFFLINE 2:14.96 rk3288evb arm-multi_v7_defconfig : OFFLINE 0:55.07 rk3288evb arm-multi_lpae_defconfig : OFFLINE 1:10.89 rk3288evb arm-multi_v7_nosmp_defconfig : OFFLINE 0:39.11 sama5 arm-sama5_defconfig : OFFLINE 2:26.36 sama5d3-xplained arm-sama5_defconfig : OFFLINE 2:48.42 socfpga arm-multi_v7_defconfig : OFFLINE 3:13.09
Board legend is available at http://arm-soc.lixom.net/boards.html
Last entries of failed logs below:
========================================================================
Board arndale-arm-multi_v7_nosmp_defconfig failure log: -------------------------------------------------
[ 1.587189] usbcore: registered new interface driver cdc_ncm [ 1.593492] usb_phy_generic.0.auto supply vcc not found, using dummy regulator [ 1.600098] usb_phy_generic.1.auto supply vcc not found, using dummy regulator [ 1.607225] exynos-dwc3 usb@12000000: no suspend clk specified [ 1.613011] usb@12000000 supply vdd33 not found, using dummy regulator [ 1.619533] usb@12000000 supply vdd10 not found, using dummy regulator [ 1.827910] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.832973] ehci-pci: EHCI PCI platform driver [ 1.837421] ehci-platform: EHCI generic platform driver [ 1.842743] ehci-omap: OMAP-EHCI Host Controller driver [ 1.847893] ehci-orion: EHCI orion driver [ 1.851888] SPEAr-ehci: EHCI SPEAr driver [ 1.855887] ehci-st: EHCI STMicroelectronics driver [ 1.860746] ehci-exynos: EHCI EXYNOS driver [ 1.865003] ehci-atmel: EHCI Atmel driver [ 1.868903] tegra-ehci: Tegra EHCI driver [ 1.872905] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.878976] ohci-pci: OHCI PCI platform driver [ 1.883418] ohci-platform: OHCI generic platform driver [ 1.888722] ohci-omap3: OHCI OMAP3 driver [ 1.892675] SPEAr-ohci: OHCI SPEAr driver [ 1.896680] ohci-st: OHCI STMicroelectronics driver [ 1.901540] ohci-atmel: OHCI Atmel driver [ 1.905858] usbcore: registered new interface driver usb-storage [ 1.912475] mousedev: PS/2 mouse device common for all mice [ 1.919348] i2c /dev entries driver [ 1.924830] 10060000.tmu supply vtmu not found, using dummy regulator [ 1.937533] sdhci: Secure Digital Host Controller Interface driver [ 1.942239] sdhci: Copyright(c) Pierre Ossman [ 1.947355] Synopsys Designware Multimedia Card Interface Driver [ 1.953055] dwmmc_exynos 12200000.mmc: IDMAC supports 32-bit address mode. [ 1.959458] dwmmc_exynos 12200000.mmc: Using internal DMA controller. [ 1.965850] dwmmc_exynos 12200000.mmc: Version ID is 241a [ 1.971241] dwmmc_exynos 12200000.mmc: DW MMC controller at irq 102,32 bit host data width,128 deep fifo [ 2.008738] dwmmc_exynos 12200000.mmc: 1 slots initialized [ 2.012953] dwmmc_exynos 122200 [PYBOOT] [arndale 22:40]: got exception: maximum recursion depth exceeded ~$off
[PYBOOT] [arndale 22:41]: Done.
========================================================================
Board colombus-arm-multi_lpae_defconfig failure log: -------------------------------------------------
[ 94.361685] EXT4-fs (mmcblk0p1): warning: mounting fs with errors, running e2fsck is recommended [ 94.373184] EXT4-fs (mmcblk0p1): re-mounted. Opts: (null) [....] Cleaning up temporary files... /tmp[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0c. [....] Activating lvm and md swap...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [....] Checking file systems...fsck from util-linux 2.20.1 [?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [....] Mounting local filesystems...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [....] Activating swapfile swap...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [....] Cleaning up temporary files...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0c. [....] Setting kernel variables ...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [ 97.232289] random: dd urandom read with 95 bits of entropy available [....] Configuring network interfaces...Internet Systems Consortium DHCP Client 4.2.2 Copyright 2004-2011 Internet Systems Consortium. All rights reserved. For info, please visit https://www.isc.org/software/dhcp/
[ 97.625635] eth0: device MAC address 6e:38:aa:d9:4c:0a [ 97.642212] RX IPC Checksum Offload disabled [ 97.646589] No MAC Management Counters available [ 97.651518] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready Listening on LPF/eth0/6e:38:aa:d9:4c:0a Sending on LPF/eth0/6e:38:aa:d9:4c:0a Sending on Socket/fallback DHCPREQUEST on eth0 to 255.255.255.255 port 67 DHCPREQUEST on eth0 to 255.255.255.255 port 67 [ 104.493143] random: nonblocking pool is initialized DHCPREQUEST on eth0 to 255.255.255.255 port 67 DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 3 DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 3 DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 7 DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 12 DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 12 DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 14
[PYBOOT] [colombus 03:08]: Timed out waiting for "<type 'str'>":
[PYBOOT] [colombus 03:09]: got exception: timeout ~$off
[PYBOOT] [colombus 03:10]: Done.
========================================================================
Board colombus-arm-multi_v7_defconfig failure log: -------------------------------------------------
[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [....] Activating swap...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [ 94.625622] EXT4-fs (mmcblk0p1): warning: mounting fs with errors, running e2fsck is recommended [ 94.636999] EXT4-fs (mmcblk0p1): re-mounted. Opts: (null) [....] Cleaning up temporary files... /tmp[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0c. [....] Activating lvm and md swap...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [....] Checking file systems...fsck from util-linux 2.20.1 [?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [....] Mounting local filesystems...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [....] Activating swapfile swap...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [....] Cleaning up temporary files...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0c. [....] Setting kernel variables ...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [ 97.473858] random: dd urandom read with 94 bits of entropy available [....] Configuring network interfaces...Internet Systems Consortium DHCP Client 4.2.2 Copyright 2004-2011 Internet Systems Consortium. All rights reserved. For info, please visit https://www.isc.org/software/dhcp/
[ 98.207165] eth0: device MAC address 46:08:76:ad:03:88 [ 98.223561] RX IPC Checksum Offload disabled [ 98.227939] No MAC Management Counters available [ 98.232864] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready Listening on LPF/eth0/46:08:76:ad:03:88 Sending on LPF/eth0/46:08:76:ad:03:88 Sending on Socket/fallback DHCPREQUEST on eth0 to 255.255.255.255 port 67 DHCPREQUEST on eth0 to 255.255.255.255 port 67 [ 104.724552] random: nonblocking pool is initialized DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 8 DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 12 DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 14 DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 21
[PYBOOT] [colombus 03:45]: Timed out waiting for "<type 'str'>":
[PYBOOT] [colombus 03:46]: got exception: timeout ~$off
[PYBOOT] [colombus 03:47]: Done.
========================================================================
Board colombus-arm-multi_v7_nosmp_defconfig failure log: -------------------------------------------------
[....] Waiting for /dev to be fully populated...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [....] Activating swap...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [ 41.700470] EXT4-fs (mmcblk0p1): warning: mounting fs with errors, running e2fsck is recommended [ 41.713743] EXT4-fs (mmcblk0p1): re-mounted. Opts: (null) [....] Cleaning up temporary files... /tmp[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0c. [....] Activating lvm and md swap...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [....] Checking file systems...fsck from util-linux 2.20.1 [?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [....] Mounting local filesystems...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [....] Activating swapfile swap...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [....] Cleaning up temporary files...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0c. [....] Setting kernel variables ...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [ 85.091132] random: dd urandom read with 66 bits of entropy available [....] Configuring network interfaces...Internet Systems Consortium DHCP Client 4.2.2 Copyright 2004-2011 Internet Systems Consortium. All rights reserved. For info, please visit https://www.isc.org/software/dhcp/
[ 89.495343] eth0: device MAC address da:10:d1:83:16:62 [ 89.640065] RX IPC Checksum Offload disabled [ 89.644697] No MAC Management Counters available [ 89.650456] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready Listening on LPF/eth0/da:10:d1:83:16:62 Sending on LPF/eth0/da:10:d1:83:16:62 Sending on Socket/fallback DHCPREQUEST on eth0 to 255.255.255.255 port 67 DHCPREQUEST on eth0 to 255.255.255.255 port 67 DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 4 DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 10 DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 11 DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 15 DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 11 DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 10
[PYBOOT] [colombus 03:17]: Timed out waiting for "<type 'str'>":
[PYBOOT] [colombus 03:18]: got exception: timeout ~$off
[PYBOOT] [colombus 03:20]: Done.
========================================================================
Board cosmic-arm-imx_v6_v7_defconfig failure log: -------------------------------------------------
[ 14.354954] blk_update_request: I/O error, dev mmcblk0, sector 3633505 [ 18.429210] mmcblk0: error -110 transferring data, sector 3633506, nr 230, cmd response 0x900, card status 0x0 [ 18.439316] blk_update_request: I/O error, dev mmcblk0, sector 3633506 [ 22.513508] mmcblk0: error -110 transferring data, sector 3633507, nr 229, cmd response 0x900, card status 0x0 [ 22.523614] blk_update_request: I/O error, dev mmcblk0, sector 3633507 [ 26.597871] mmcblk0: error -110 transferring data, sector 3633508, nr 228, cmd response 0x900, card status 0x0 [ 26.607979] blk_update_request: I/O error, dev mmcblk0, sector 3633508 [ 30.682226] mmcblk0: error -110 transferring data, sector 3633509, nr 227, cmd response 0x900, card status 0x0 [ 30.692334] blk_update_request: I/O error, dev mmcblk0, sector 3633509 [ 34.766626] mmcblk0: error -110 transferring data, sector 3633510, nr 226, cmd response 0x900, card status 0x0 [ 34.776732] blk_update_request: I/O error, dev mmcblk0, sector 3633510 [ 38.850977] mmcblk0: error -110 transferring data, sector 3633511, nr 225, cmd response 0x900, card status 0x0 [ 38.861087] blk_update_request: I/O error, dev mmcblk0, sector 3633511 [ 42.935306] mmcblk0: error -110 transferring data, sector 3633512, nr 224, cmd response 0x900, card status 0x0 [ 42.945413] blk_update_request: I/O error, dev mmcblk0, sector 3633512 [ 47.019666] mmcblk0: error -110 transferring data, sector 3633513, nr 223, cmd response 0x900, card status 0x0 [ 47.029779] blk_update_request: I/O error, dev mmcblk0, sector 3633513 [ 51.103965] mmcblk0: error -110 transferring data, sector 3633514, nr 222, cmd response 0x900, card status 0x0 [ 51.114073] blk_update_request: I/O error, dev mmcblk0, sector 3633514 [ 55.188314] mmcblk0: error -110 transferring data, sector 3633515, nr 221, cmd response 0x900, card status 0x0 [ 55.198418] blk_update_request: I/O error, dev mmcblk0, sector 3633515 [ 59.272663] mmcblk0: error -110 transferring data, sector 3633516, nr 220, cmd response 0x900, card status 0x0 [ 59.282764] blk_update_request: I/O error, dev mmcblk0, sector 3633516 [ 63.357017] mmcblk0: error -110 transferring data, sector 3633517, nr 219, cmd response 0x900, card status 0x0 [ 63.367127] blk_update_request: I/O error, dev mmcblk0, sector 3633517 [ 67.441369] mmcblk0: error -110 transferring data, sector 3633518, nr 218, cmd response 0x900, card status 0x0 [ 67.451472] blk_update_request: I/O error, dev mmcblk0, sector 3633518 [ 71.525665] mmcblk0: error -110 transferring data, sector 3633519, nr 217, cmd response 0x900, card status 0x0 [ 71.535774] blk_update_request: I/O error, dev mmcblk0, sector 3633519 [ 75.610023] mmcblk0: error -110 transferring data, sector 3633520, nr 216, cmd response 0x900, card status 0x0 [ 75.620129] blk_update_request: I/O error, dev mmcblk0, sector 3633520 [ 79.694317] mmcblk0: error -110 transferring data, sector 3633521, nr 215, cmd response 0x900, card status 0x0 [ 79.704422] blk_update_request: I/O error, dev mmcblk0, sector 3633521
[PYBOOT] [cosmic 02:01]: Timed out waiting for "<type 'str'>":
[PYBOOT] [cosmic 02:02]: got exception: timeout ~$off
[PYBOOT] [cosmic 02:03]: Done.
========================================================================
Board cosmic-arm-multi_v7_defconfig failure log: -------------------------------------------------
[ 14.006692] blk_update_request: I/O error, dev mmcblk0, sector 3633505 [ 18.080674] mmcblk0: error -110 transferring data, sector 3633506, nr 230, cmd response 0x900, card status 0x0 [ 18.090750] blk_update_request: I/O error, dev mmcblk0, sector 3633506 [ 22.164728] mmcblk0: error -110 transferring data, sector 3633507, nr 229, cmd response 0x900, card status 0x0 [ 22.174802] blk_update_request: I/O error, dev mmcblk0, sector 3633507 [ 26.248779] mmcblk0: error -110 transferring data, sector 3633508, nr 228, cmd response 0x900, card status 0x0 [ 26.258854] blk_update_request: I/O error, dev mmcblk0, sector 3633508 [ 30.332831] mmcblk0: error -110 transferring data, sector 3633509, nr 227, cmd response 0x900, card status 0x0 [ 30.342913] blk_update_request: I/O error, dev mmcblk0, sector 3633509 [ 34.416904] mmcblk0: error -110 transferring data, sector 3633510, nr 226, cmd response 0x900, card status 0x0 [ 34.426982] blk_update_request: I/O error, dev mmcblk0, sector 3633510 [ 38.500968] mmcblk0: error -110 transferring data, sector 3633511, nr 225, cmd response 0x900, card status 0x0 [ 38.511050] blk_update_request: I/O error, dev mmcblk0, sector 3633511 [ 42.585038] mmcblk0: error -110 transferring data, sector 3633512, nr 224, cmd response 0x900, card status 0x0 [ 42.595106] blk_update_request: I/O error, dev mmcblk0, sector 3633512 [ 46.669079] mmcblk0: error -110 transferring data, sector 3633513, nr 223, cmd response 0x900, card status 0x0 [ 46.679148] blk_update_request: I/O error, dev mmcblk0, sector 3633513 [ 50.753125] mmcblk0: error -110 transferring data, sector 3633514, nr 222, cmd response 0x900, card status 0x0 [ 50.763200] blk_update_request: I/O error, dev mmcblk0, sector 3633514 [ 54.837183] mmcblk0: error -110 transferring data, sector 3633515, nr 221, cmd response 0x900, card status 0x0 [ 54.847250] blk_update_request: I/O error, dev mmcblk0, sector 3633515 [ 58.921230] mmcblk0: error -110 transferring data, sector 3633516, nr 220, cmd response 0x900, card status 0x0 [ 58.931302] blk_update_request: I/O error, dev mmcblk0, sector 3633516 [ 63.005281] mmcblk0: error -110 transferring data, sector 3633517, nr 219, cmd response 0x900, card status 0x0 [ 63.015354] blk_update_request: I/O error, dev mmcblk0, sector 3633517 [ 67.089398] mmcblk0: error -110 transferring data, sector 3633518, nr 218, cmd response 0x900, card status 0x0 [ 67.099464] blk_update_request: I/O error, dev mmcblk0, sector 3633518 [ 71.173443] mmcblk0: error -110 transferring data, sector 3633519, nr 217, cmd response 0x900, card status 0x0 [ 71.183517] blk_update_request: I/O error, dev mmcblk0, sector 3633519 [ 75.257499] mmcblk0: error -110 transferring data, sector 3633520, nr 216, cmd response 0x900, card status 0x0 [ 75.267577] blk_update_request: I/O error, dev mmcblk0, sector 3633520 [ 79.341553] mmcblk0: error -110 transferring data, sector 3633521, nr 215, cmd response 0x900, card status 0x0 [ 79.351628] blk_update_request: I/O error, dev mmcblk0, sector 3633521
[PYBOOT] [cosmic 02:32]: Timed out waiting for "<type 'str'>":
[PYBOOT] [cosmic 02:33]: got exception: timeout ~$off
[PYBOOT] [cosmic 02:34]: Done.
========================================================================
Board cosmic-arm-multi_v7_nosmp_defconfig failure log: -------------------------------------------------
[ 13.822837] blk_update_request: I/O error, dev mmcblk0, sector 3633505 [ 17.896754] mmcblk0: error -110 transferring data, sector 3633506, nr 230, cmd response 0x900, card status 0x0 [ 17.906811] blk_update_request: I/O error, dev mmcblk0, sector 3633506 [ 21.980730] mmcblk0: error -110 transferring data, sector 3633507, nr 229, cmd response 0x900, card status 0x0 [ 21.990784] blk_update_request: I/O error, dev mmcblk0, sector 3633507 [ 26.064703] mmcblk0: error -110 transferring data, sector 3633508, nr 228, cmd response 0x900, card status 0x0 [ 26.074767] blk_update_request: I/O error, dev mmcblk0, sector 3633508 [ 30.148689] mmcblk0: error -110 transferring data, sector 3633509, nr 227, cmd response 0x900, card status 0x0 [ 30.158758] blk_update_request: I/O error, dev mmcblk0, sector 3633509 [ 34.232678] mmcblk0: error -110 transferring data, sector 3633510, nr 226, cmd response 0x900, card status 0x0 [ 34.242741] blk_update_request: I/O error, dev mmcblk0, sector 3633510 [ 38.316657] mmcblk0: error -110 transferring data, sector 3633511, nr 225, cmd response 0x900, card status 0x0 [ 38.326738] blk_update_request: I/O error, dev mmcblk0, sector 3633511 [ 42.400657] mmcblk0: error -110 transferring data, sector 3633512, nr 224, cmd response 0x900, card status 0x0 [ 42.410721] blk_update_request: I/O error, dev mmcblk0, sector 3633512 [ 46.484642] mmcblk0: error -110 transferring data, sector 3633513, nr 223, cmd response 0x900, card status 0x0 [ 46.494702] blk_update_request: I/O error, dev mmcblk0, sector 3633513 [ 50.568621] mmcblk0: error -110 transferring data, sector 3633514, nr 222, cmd response 0x900, card status 0x0 [ 50.578669] blk_update_request: I/O error, dev mmcblk0, sector 3633514 [ 54.652582] mmcblk0: error -110 transferring data, sector 3633515, nr 221, cmd response 0x900, card status 0x0 [ 54.662634] blk_update_request: I/O error, dev mmcblk0, sector 3633515 [ 58.736545] mmcblk0: error -110 transferring data, sector 3633516, nr 220, cmd response 0x900, card status 0x0 [ 58.746599] blk_update_request: I/O error, dev mmcblk0, sector 3633516 [ 62.820512] mmcblk0: error -110 transferring data, sector 3633517, nr 219, cmd response 0x900, card status 0x0 [ 62.830562] blk_update_request: I/O error, dev mmcblk0, sector 3633517 [ 66.904474] mmcblk0: error -110 transferring data, sector 3633518, nr 218, cmd response 0x900, card status 0x0 [ 66.914528] blk_update_request: I/O error, dev mmcblk0, sector 3633518 [ 70.988445] mmcblk0: error -110 transferring data, sector 3633519, nr 217, cmd response 0x900, card status 0x0 [ 70.998501] blk_update_request: I/O error, dev mmcblk0, sector 3633519 [ 75.072422] mmcblk0: error -110 transferring data, sector 3633520, nr 216, cmd response 0x900, card status 0x0 [ 75.082476] blk_update_request: I/O error, dev mmcblk0, sector 3633520 [ 79.156390] mmcblk0: error -110 transferring data, sector 3633521, nr 215, cmd response 0x900, card status 0x0 [ 79.166447] blk_update_request: I/O error, dev mmcblk0, sector 3633521
[PYBOOT] [cosmic 02:13]: Timed out waiting for "<type 'str'>":
[PYBOOT] [cosmic 02:14]: got exception: timeout ~$off
[PYBOOT] [cosmic 02:16]: Done.
========================================================================
Board omap5uevm-arm-multi_lpae_defconfig failure log: -------------------------------------------------
[ 1.898985] mmc0: new high speed MMC card at address 0001 [ 1.904973] mmcblk0: mmc0:0001 SEM04G 3.69 GiB [ 1.909903] mmcblk0boot0: mmc0:0001 SEM04G partition 1 2.00 MiB [ 1.916278] mmcblk0boot1: mmc0:0001 SEM04G partition 2 2.00 MiB [ 1.925316] smsc95xx v1.0.4 [ 1.928974] palmas 0-0048: Muxing GPIO 2, PWM 0, LED 0 [ 1.939714] palmas-rtc 48070000.i2c:palmas@48:rtc: rtc core: registered 48070000.i2c:palmas as rtc0 [ 1.977993] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 1.988207] smsc95xx 1-3:1.0 eth0: register 'smsc95xx' at usb-4a064c00.ehci-3, smsc95xx USB 2.0 Ethernet, 56:18:ca:25:26:39 [ 2.005053] omap_i2c 4807c000.i2c: bus 4 rev0.12 at 400 kHz [ 2.046067] cpufreq: cpufreq_online: CPU0: Running at unlisted freq: 1100000 KHz [ 2.054005] cpufreq: cpufreq_online: CPU0: Unlisted initial frequency changed to: 1500000 KHz [ 2.063061] Unable to handle kernel NULL pointer dereference at virtual address 0000000c [ 2.071541] Unable to handle kernel NULL pointer dereference at virtual address 00000290 [ 2.071545] pgd = c0204000 [ 2.071548] [00000290] *pgd=00000000 [ 2.071553] Internal error: Oops: 5 [#1] SMP ARM [ 2.071557] Modules linked in: [ 2.071562] CPU: 1 PID: 0 Comm: swapper/1 Not tainted 4.5.0-rc6-next-20160229 #1 [ 2.071564] Hardware name: Generic OMAP5 (Flattened Device Tree) [ 2.071566] task: ee06f480 ti: ee090000 task.ti: ee090000 [ 2.071576] PC is at irq_enter+0x18/0x6c [ 2.071579] LR is at irq_enter+0x8/0x6c [ 2.071583] pc : [<c0345990>] lr : [<c0345980>] psr: 40000193 [ 2.071583] sp : ee091f30 ip : 00000000 fp : ee091f4c [ 2.071585] r10: c130250c r9 : fa213000 r8 : fa212000 [ 2.071587] r7 : ee091f88 r6 : 00000001 r5 : c1302694 r4 : c120a2c0 [ 2.071590] r3 : ee091f00 r2 : 00000000 r1 : 00001713 r0 : 00000000 [ 2.071594] Flags: nZcv IRQs off FIQs on Mode SVC_32 ISA ARM Segment none [ 2.071596] Control: 10c5387d Table: 8020406a DAC: 00000051 [ 2.071599] Process swapper/1 (pid: 0, stack limit = 0xee090220) [ 2.071601] Stack: (0xee091f30 to 0xee092000) [ 2.071606] 1f20: 00000000 c0365520 c1208510 00000001
[PYBOOT] [omap5uevm 02:12]: Timed out waiting for "<type 'str'>":
[PYBOOT] [omap5uevm 02:13]: got exception: timeout ~$off
[PYBOOT] [omap5uevm 02:14]: Done.
========================================================================
Board omap5uevm-arm-multi_v7_defconfig failure log: -------------------------------------------------
[ 2.079528] 9c80: c1307c4c ee088000 00000000 00000008 65000000 33306131 20313030 66666165 [ 2.079532] 9ca0: 30666666 32396520 66663464 31652030 30353061 28203130 31393565 63313033 [ 2.079537] 9cš0: c0002029 ee089ce4 00000178 0000001c 00000005 ee089de8 00000000 00000005 [ 2.079541] 9ce0: 0000001c c120a2c0 ee089ebc c031c8b8 0000001c c0317adc 00000000 000003f9 [ 2.079546] 9d00: 0000012a 00000000 00000000 00000001 00000000 00000000 00000001 c1205380 [ 2.079550] 9d20: 2ddcf000 c1308564 00000005 c0317b80 0000001c ee089de8 c1302694 c120a2c0 [ 2.079554] 9d40: ee089ebc c03012a8 00000000 c120a2c0 c120a2c0 ee041480 00000000 00000001 [ 2.079558] 9d60: 00000002 eefd4380 00000000 ee041480 eefcc2c0 00000000 00000001 eefd92c0 [ 2.079563] 9d80: 00000000 00000000 00000002 000000bc eefd43š0 00000008 00000003 00000020 [ 2.079567] 9da0: 00000002 00000002 ee089da8 ee089da8 eefd97d0 ffff1800 ffff1800 00000001 [ 2.079572] 9dc0: ee06e000 eefcc300 5c8cc2c4 7befa11e c036eb70 60000093 ffffffff ee089e1c [ 2.079576] 9dš0: 2ddc2000 c030c5e0 eefcc300 00000000 00000000 00000000 eefcc2c0 00000000 [ 2.079581] 9e00: eefcc300 00000000 2ddc2000 c1302694 c120a2c0 ee089ebc 00000001 ee089e3c [ 2.079585] 9e20: c03718b0 c036eb70 60000093 ffffffff 00000051 ee06e2a8 2ddc2000 eefcc2c0 [ 2.079590] 9e40: ffffff80 eefcc300 00000000 2ddc2000 c1302694 c120a2c0 ee089ebc c03718b0 [ 2.079594] 9e60: c03717f4 eefcc2c0 ee06df80 c120a2c0 ee06e2a4 c0b4b7c8 ffffffff [ 2.079599] 9e80: 00000000 ee06f480 ee06df80 00000000 c0b4bca4 00000000 ee089ed4 ee088000 [ 2.079603] 9ea0: eefc9400 ee089ed4 eefc9400 c1302100 c1302534 00000001 ee089ecc c0b4bca4 [ 2.079607] 9ec0: 000007d9 ffff1740 00000000 c0b4e530 40000013 00000000 eefc9520 ffff1740 [ 2.079611] 9ee0: c0392c5c ee06df80 00000000 ffffffff c13373c0 c133755c c1337550 c1302100 [ 2.079615] 9f00: 00000001 c039050c c133755e 00000000 c13373c0 c140a9b1 ee089f08 ee088000 [ 2.079620] 9f20: c13373cc c133755c 00b4bca4 00000000 ee06df80 c0377a8c c1337554 c1337554 [ 2.079624] 9š40: c0390084 00000000 ee03db40 c13373c0 c0390084 00000000 00000000 00000000 [ 2.079628] 9f0: 00000000 c035c0f8 41002508 00000000 00000001 c13373c0 00000000 00000000 [ 2.079633] 9f80: ee089f80 ee089f80 00000001 00010001 ee089f90 ee089f90 ee089fac ee03db40 [ 2.079637] 9ša0: c035c01c 00000000 00000000 c0307eb8 00000000 00000000 00000000 00000000 [ 2.079641] 9fc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 [ 2.079645] 9fe0: 00000000 00000000 00000000 00000000 00000013 00000000 008940a4 21100021 [ 2.079649] Code: bad PC value [ 2.079651] ---[ end trace 1035b9c636332178 ]--- [ 2.079653] Fixing recursive fault but reboot is needed! [ 2.903913] fdt: not creating '/sys/firmware/fdt': CRC check failed [ 2.914519] vmmcsdio_fixed: disabling
[PYBOOT] [omap5uevm 02:03]: Timed out waiting for "<type 'str'>":
[PYBOOT] [omap5uevm 02:04]: got exception: timeout ~$off
[PYBOOT] [omap5uevm 02:05]: Done.
========================================================================
Board omap5uevm-arm-multi_v7_nosmp_defconfig failure log: -------------------------------------------------
[ 1.656916] ledtrig-cpu: registered to indicate activity on CPUs [ 1.663397] usbcore: registered new interface driver usbhid [ 1.669223] usbhid: USB HID core driver [ 1.675974] NET: Registered protocol family 10 [ 1.681200] sit: IPv6 over IPv4 tunneling driver [ 1.686366] NET: Registered protocol family 17 [ 1.691018] can: controller area network core (rev 20120528 abi 9) [ 1.697507] NET: Registered protocol family 29 [ 1.702149] can: raw protocol (rev 20120528) [ 1.706620] can: broadcast manager protocol (rev 20120528 t) [ 1.712546] can: netlink gateway (rev 20130117) max_hops=1 [ 1.718495] Key type dns_resolver registered [ 1.723047] omap_vc_init_channel: No PMIC info for vdd_core [ 1.728875] omap_vp_init: No PMIC info for vdd_core [ 1.733982] omap_vc_init_channel: No PMIC info for vdd_mm [ 1.739618] omap_vp_init: No PMIC info for vdd_mm [ 1.744540] omap_vc_init_channel: No PMIC info for vdd_mpu [ 1.750272] omap_vp_init: No PMIC info for vdd_mpu [ 1.755564] Power Management for TI OMAP4+ devices. [ 1.760772] ThumbEE CPU extension supported. [ 1.765348] usb 1-3: new high-speed USB device number 2 using ehci-omap [ 1.776826] palmas 0-0048: Irq flag is 0x00000000 [ 1.799549] palmas 0-0048: Muxing GPIO 2, PWM 0, LED 0 [ 1.808877] palmas-rtc 48070000.i2c:palmas@48:rtc: rtc core: registered 48070000.i2c:palmas as rtc0 [ 1.833288] mmc0: new high speed MMC card at address 0001 [ 1.839159] mmcblk0: mmc0:0001 SEM04G 3.69 GiB [ 1.844030] mmcblk0boot0: mmc0:0001 SEM04G partition 1 2.00 MiB [ 1.850340] mmcblk0boot1: mmc0:0001 SEM04G partition 2 2.00 MiB [ 1.865363] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 1.887913] omap_i2c 4807c000.i2c: bus 4 rev0.12 at 400 kHz [ 1.904921] smsc95xx v1.0.4 [ 1.923372] cpufreq: cpufreq_online: CPU0: Running at unlisted freq: 1100000 KHz [ 1.931260] cpufreq: cpufreq_online: CPU0: Unlisted initial frequency changed to: 1500000 KHz
[PYBOOT] [omap5uevm 02:32]: Timed out waiting for "<type 'str'>":
[PYBOOT] [omap5uevm 02:33]: got exception: timeout ~$off
[PYBOOT] [omap5uevm 02:34]: Done.
========================================================================
Board pi-arm-exynos_defconfig failure log: -------------------------------------------------
[ 0.151604] workingset: timestamp_bits=28 max_order=20 bucket_order=0 [ 0.166269] NFS: Registering the id_resolver key type [ 0.166292] Key type id_resolver registered [ 0.166298] Key type id_legacy registered [ 0.166341] romfs: ROMFS MTD (C) 2007 Red Hat, Inc. [ 0.167120] bounce: pool size: 64 pages [ 0.167294] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249) [ 0.167303] io scheduler noop registered [ 0.167311] io scheduler deadline registered [ 0.167474] io scheduler cfq registered (default) [ 0.168773] 12130000.phy supply vbus not found, using dummy regulator [ 0.169456] 12100000.phy supply vbus-boost not found, using dummy regulator [ 0.169781] 12500000.phy supply vbus-boost not found, using dummy regulator [ 0.172545] dma-pl330 3880000.adma: Loaded driver for PL330 DMAC-241330 [ 0.172554] dma-pl330 3880000.adma: DBUFF-4x8bytes Num_Chans-6 Num_Peri-16 Num_Events-6 [ 0.175206] dma-pl330 121a0000.pdma: Loaded driver for PL330 DMAC-241330 [ 0.175214] dma-pl330 121a0000.pdma: DBUFF-32x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32 [ 0.177830] dma-pl330 121b0000.pdma: Loaded driver for PL330 DMAC-241330 [ 0.177839] dma-pl330 121b0000.pdma: DBUFF-32x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32 [ 0.178607] dma-pl330 10800000.mdma: Loaded driver for PL330 DMAC-241330 [ 0.178615] dma-pl330 10800000.mdma: DBUFF-64x8bytes Num_Chans-8 Num_Peri-1 Num_Events-32 [ 0.225867] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [ 0.227374] 12c00000.serial: ttySAC0 at MMIO 0x12c00000 (irq = 58, base_baud = 0) is a S3C6400/10 [ 0.227667] 12c10000.serial: ttySAC1 at MMIO 0x12c10000 (irq = 59, base_baud = 0) is a S3C6400/10 [ 0.227956] 12c20000.serial: ttySAC2 at MMIO 0x12c20000 (irq = 60, base_baud = 0) is a S3C6400/10 [ 0.228251] 12c30000.serial: ttySAC3 at MMIO 0x12c30000 (irq = 61, base_baud = 0) is a S3C6400/10 [ 0.868285] console [ttySAC3] enabled [ 0.872687] [drm] Initialized drm 1.1.0 20060810 [ 0.879682] exynos-hdmi 14530000.hdmi: Failed to get supply 'vdd': -517 [ 0.884839] [drm:hdmi_probe] *ERROR* failed to get regulators [ 0.890554] [drm:hdmi_probe] *ERROR* hdmi_resources_init failed [ 0.987716] brd: module loaded [ 1.034269] loop: module loaded
[PYBOOT] [pi 01:44]: Timed out waiting for "<type 'str'>":
[PYBOOT] [pi 01:45]: got exception: timeout ~$off
[PYBOOT] [pi 01:46]: Done.
========================================================================
Board pi-arm-multi_lpae_defconfig failure log: -------------------------------------------------
[ 1.800438] dwmmc_exynos 12220000.mmc: 1 slots initialized [ 1.805250] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.812202] ledtrig-cpu: registered to indicate activity on CPUs [ 1.817142] usbcore: registered new interface driver usbhid [ 1.822290] usbhid: USB HID core driver [ 1.826193] isl29018 7-0044: No cache defaults, reading back from HW [ 1.832542] isl29018 7-0044: Failed to read 1: -6 [ 1.837126] isl29018 7-0044: regmap initialization failed: -6 [ 1.847665] NET: Registered protocol family 10 [ 1.852066] sit: IPv6 over IPv4 tunneling driver [ 1.855650] NET: Registered protocol family 17 [ 1.859650] can: controller area network core (rev 20120528 abi 9) [ 1.865862] NET: Registered protocol family 29 [ 1.870231] can: raw protocol (rev 20120528) [ 1.874500] can: broadcast manager protocol (rev 20120528 t) [ 1.880141] can: netlink gateway (rev 20130117) max_hops=1 [ 1.885858] Key type dns_resolver registered [ 1.890160] ThumbEE CPU extension supported. [ 1.894112] Registering SWP/SWPB emulation handler [ 1.903198] dwmmc_exynos 12210000.mmc: IDMAC supports 32-bit address mode. [ 1.908682] dwmmc_exynos 12210000.mmc: Using internal DMA controller. [ 1.915047] dwmmc_exynos 12210000.mmc: Version ID is 250a [ 1.920421] dwmmc_exynos 12210000.mmc: DW MMC controller at irq 70,64 bit host data width,64 deep fifo [ 1.930532] input: gpio-keys as /devices/platform/gpio-keys/input/input1 [ 1.939987] dwmmc_exynos 12210000.mmc: IDMAC supports 32-bit address mode. [ 1.945437] mmc_host mmc0: Bus speed (slot 0) = 200000000Hz (slot req 200000000Hz, actual 200000000HZ div = 0) [ 1.955587] dwmmc_exynos 12210000.mmc: Using internal DMA controller. [ 1.961802] dwmmc_exynos 12210000.mmc: Version ID is 250a [ 1.967180] dwmmc_exynos 12210000.mmc: DW MMC controller at irq 70,64 bit host data width,64 deep fifo [ 1.976894] max77686-rtc max77802-rtc: hctosys: unable to read the hardware clock [ 2.001225] Waiting for root device /dev/mmcblk0p1... [ 2.005073] mmc0: tuning execution failed: -5 [ 2.009169] mmc0: error -5 whilst initialising MMC card
[PYBOOT] [pi 02:21]: Timed out waiting for "<type 'str'>":
[PYBOOT] [pi 02:22]: got exception: timeout ~$off
[PYBOOT] [pi 02:23]: Done.
========================================================================
Board pi-arm-multi_v7_defconfig failure log: -------------------------------------------------
[ 1.800399] dwmmc_exynos 12220000.mmc: 1 slots initialized [ 1.805210] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.812159] ledtrig-cpu: registered to indicate activity on CPUs [ 1.817095] usbcore: registered new interface driver usbhid [ 1.822246] usbhid: USB HID core driver [ 1.826148] isl29018 7-0044: No cache defaults, reading back from HW [ 1.832497] isl29018 7-0044: Failed to read 1: -6 [ 1.837082] isl29018 7-0044: regmap initialization failed: -6 [ 1.847612] NET: Registered protocol family 10 [ 1.852060] sit: IPv6 over IPv4 tunneling driver [ 1.855622] NET: Registered protocol family 17 [ 1.859622] can: controller area network core (rev 20120528 abi 9) [ 1.865836] NET: Registered protocol family 29 [ 1.870204] can: raw protocol (rev 20120528) [ 1.874473] can: broadcast manager protocol (rev 20120528 t) [ 1.880115] can: netlink gateway (rev 20130117) max_hops=1 [ 1.885832] Key type dns_resolver registered [ 1.890133] ThumbEE CPU extension supported. [ 1.894085] Registering SWP/SWPB emulation handler [ 1.903151] dwmmc_exynos 12210000.mmc: IDMAC supports 32-bit address mode. [ 1.908636] dwmmc_exynos 12210000.mmc: Using internal DMA controller. [ 1.915002] dwmmc_exynos 12210000.mmc: Version ID is 250a [ 1.920377] dwmmc_exynos 12210000.mmc: DW MMC controller at irq 70,64 bit host data width,64 deep fifo [ 1.930482] input: gpio-keys as /devices/platform/gpio-keys/input/input1 [ 1.939933] dwmmc_exynos 12210000.mmc: IDMAC supports 32-bit address mode. [ 1.945394] mmc_host mmc0: Bus speed (slot 0) = 200000000Hz (slot req 200000000Hz, actual 200000000HZ div = 0) [ 1.955526] dwmmc_exynos 12210000.mmc: Using internal DMA controller. [ 1.961741] dwmmc_exynos 12210000.mmc: Version ID is 250a [ 1.967119] dwmmc_exynos 12210000.mmc: DW MMC controller at irq 70,64 bit host data width,64 deep fifo [ 1.976827] max77686-rtc max77802-rtc: hctosys: unable to read the hardware clock [ 2.001110] Waiting for root device /dev/mmcblk0p1... [ 2.004951] mmc0: tuning execution failed: -5 [ 2.009046] mmc0: error -5 whilst initialising MMC card
[PYBOOT] [pi 01:56]: Timed out waiting for "<type 'str'>":
[PYBOOT] [pi 01:57]: got exception: timeout ~$off
[PYBOOT] [pi 01:58]: Done.
========================================================================
Board pit-arm-exynos_defconfig failure log: -------------------------------------------------
[ 0.151718] workingset: timestamp_bits=28 max_order=20 bucket_order=0 [ 0.166466] NFS: Registering the id_resolver key type [ 0.166489] Key type id_resolver registered [ 0.166495] Key type id_legacy registered [ 0.166540] romfs: ROMFS MTD (C) 2007 Red Hat, Inc. [ 0.167329] bounce: pool size: 64 pages [ 0.167503] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249) [ 0.167513] io scheduler noop registered [ 0.167521] io scheduler deadline registered [ 0.167688] io scheduler cfq registered (default) [ 0.168996] 12130000.phy supply vbus not found, using dummy regulator [ 0.169683] 12100000.phy supply vbus-boost not found, using dummy regulator [ 0.170009] 12500000.phy supply vbus-boost not found, using dummy regulator [ 0.172779] dma-pl330 3880000.adma: Loaded driver for PL330 DMAC-241330 [ 0.172788] dma-pl330 3880000.adma: DBUFF-4x8bytes Num_Chans-6 Num_Peri-16 Num_Events-6 [ 0.175487] dma-pl330 121a0000.pdma: Loaded driver for PL330 DMAC-241330 [ 0.175496] dma-pl330 121a0000.pdma: DBUFF-32x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32 [ 0.178131] dma-pl330 121b0000.pdma: Loaded driver for PL330 DMAC-241330 [ 0.178139] dma-pl330 121b0000.pdma: DBUFF-32x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32 [ 0.178908] dma-pl330 10800000.mdma: Loaded driver for PL330 DMAC-241330 [ 0.178917] dma-pl330 10800000.mdma: DBUFF-64x8bytes Num_Chans-8 Num_Peri-1 Num_Events-32 [ 0.226522] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [ 0.228037] 12c00000.serial: ttySAC0 at MMIO 0x12c00000 (irq = 58, base_baud = 0) is a S3C6400/10 [ 0.228334] 12c10000.serial: ttySAC1 at MMIO 0x12c10000 (irq = 59, base_baud = 0) is a S3C6400/10 [ 0.228629] 12c20000.serial: ttySAC2 at MMIO 0x12c20000 (irq = 60, base_baud = 0) is a S3C6400/10 [ 0.228920] 12c30000.serial: ttySAC3 at MMIO 0x12c30000 (irq = 61, base_baud = 0) is a S3C6400/10 [ 0.868956] console [ttySAC3] enabled [ 0.873360] [drm] Initialized drm 1.1.0 20060810 [ 0.880365] exynos-hdmi 14530000.hdmi: Failed to get supply 'vdd': -517 [ 0.885526] [drm:hdmi_probe] *ERROR* failed to get regulators [ 0.891241] [drm:hdmi_probe] *ERROR* hdmi_resources_init failed [ 0.988476] brd: module loaded [ 1.035076] loop: module loaded
[PYBOOT] [pit 01:45]: Timed out waiting for "<type 'str'>":
[PYBOOT] [pit 01:46]: got exception: timeout ~$off
[PYBOOT] [pit 01:47]: Done.
========================================================================
Board snow-arm-multi_v7_nosmp_defconfig failure log: -------------------------------------------------
[....] Waiting for /dev to be fully populated...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [....] Activating swap...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [ 3.333585] EXT4-fs (mmcblk0p3): warning: mounting fs with errors, running e2fsck is recommended [ 3.341930] EXT4-fs (mmcblk0p3): re-mounted. Opts: (null) [....] Cleaning up temporary files... /tmp[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0c. [....] Activating lvm and md swap...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [....] Checking file systems...fsck from util-linux 2.20.1 [?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [....] Mounting local filesystems...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [....] Activating swapfile swap...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [....] Cleaning up temporary files...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0c. [....] Setting kernel variables ...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [ 4.406090] random: dd urandom read with 64 bits of entropy available [....] Configuring network interfaces...Internet Systems Consortium DHCP Client 4.2.2 Copyright 2004-2011 Internet Systems Consortium. All rights reserved. For info, please visit https://www.isc.org/software/dhcp/
Cannot find device "eth0" Bind socket to interface: No such device Failed to bring up eth0. [?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [....] Cleaning up temporary files...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0c. INIT: Entering runlevel: 2 [[36minfo[39;49m] Using makefile-style concurrent boot in runlevel 2. [....] Starting enhanced syslogd: rsyslogd[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0c. [....] Starting web server: apache2apache2: Could not reliably determine the server's fully qualified domain name, using 127.0.0.1 for ServerName [?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0c. [....] Starting periodic command scheduler: cron[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0c. [....] Starting system message bus: dbus[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0c. [....] Loading cpufreq kernel modules...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone (none). [....] CPUFreq Utilities: Setting ondemand CPUFreq governor...CPU0...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [....] Starting OpenBSD Secure Shell server: sshd[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0c.
[PYBOOT] [snow 03:13]: Timed out waiting for "<type 'str'>":
[PYBOOT] [snow 03:14]: got exception: timeout ~$off
[PYBOOT] [snow 03:15]: Done.
========================================================================
Board snowball-arm-multi_v7_defconfig failure log: -------------------------------------------------
smc911x: phy initialized smc911x: MAC 08:00:08:1e:0f:44 Using smc911x-0 device TFTP from server 172.16.20.2; our IP address is 172.16.20.108 Filename 'tmp/snowball-qYhSmk/tmpSG_rlU-uImage'. Load address: 0x1000000 Loading: *T ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################# done Bytes transferred = 6919799 (699677 hex) U8500 $ bootm 0x01000000
[PYBOOT] [snowball 02:49]: u-boot: jumping to kernel image bootm 0x01000000 ## Booting kernel from Legacy Image at 01000000 ... Image Name: Linux Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 6919735 Bytes = 6.6 MB Load Address: 00208000 Entry Point: 00208000 Loading Kernel Image ... OK OK
Starting kernel ...
[PYBOOT] [snowball 02:52]: u-boot: started kernel.
[PYBOOT] [snowball 03:27]: Timed out waiting for "<type 'str'>":
[PYBOOT] [snowball 03:28]: got exception: timeout ~$off
[PYBOOT] [snowball 03:29]: Done.
========================================================================
Board snowball-arm-multi_v7_nosmp_defconfig failure log: -------------------------------------------------
smc911x: detected LAN9221 controller smc911x: phy initialized smc911x: MAC 08:00:08:1e:0f:44 Using smc911x-0 device TFTP from server 172.16.20.2; our IP address is 172.16.20.108 Filename 'tmp/snowball-Glt3iv/tmpCh6JhV-uImage'. Load address: 0x1000000 Loading: *T ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################# done Bytes transferred = 6198247 (5e93e7 hex) U8500 $ bootm 0x01000000
[PYBOOT] [snowball 00:36]: u-boot: jumping to kernel image bootm 0x01000000 ## Booting kernel from Legacy Image at 01000000 ... Image Name: Linux Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 6198183 Bytes = 5.9 MB Load Address: 00208000 Entry Point: 00208000 Loading Kernel Image ... OK OK
Starting kernel ...
[PYBOOT] [snowball 00:39]: u-boot: started kernel.
[PYBOOT] [snowball 01:14]: Timed out waiting for "<type 'str'>":
[PYBOOT] [snowball 01:15]: got exception: timeout ~$off
[PYBOOT] [snowball 01:16]: Done.
========================================================================
Board snowball-arm-u8500_defconfig failure log: -------------------------------------------------
setenv serverip 172.16.20.2 U8500 $ tftp 0x01000000 tmp/snowball-gjJBN2/tmp0JnxuS-uImage tftp 0x01000000 tmp/snowball-gjJBN2/tmp0JnxuS-uImage smc911x: detected LAN9221 controller smc911x: phy initialized smc911x: MAC 08:00:08:1e:0f:44 Using smc911x-0 device TFTP from server 172.16.20.2; our IP address is 172.16.20.108 Filename 'tmp/snowball-gjJBN2/tmp0JnxuS-uImage'. Load address: 0x1000000 Loading: *T ################################################################# ################################################################# ################################################################# ############################################################# done Bytes transferred = 3750751 (393b5f hex) U8500 $ bootm 0x01000000
[PYBOOT] [snowball 00:33]: u-boot: jumping to kernel image bootm 0x01000000 ## Booting kernel from Legacy Image at 01000000 ... Image Name: Linux Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 3750687 Bytes = 3.6 MB Load Address: 00008000 Entry Point: 00008000 Loading Kernel Image ... OK OK
Starting kernel . [PYBOOT] [snowball 00:35]: u-boot: started kernel. ..
[PYBOOT] [snowball 01:10]: Timed out waiting for "<type 'str'>":
[PYBOOT] [snowball 01:11]: got exception: timeout ~$off
[PYBOOT] [snowball 01:13]: Done.
kernel-build-reports@lists.linaro.org