Failed boards:
cubie2 sunxi_defconfig : FAILED 1:23.15 cubie2 multi_v7_defconfig : FAILED 1:37.10 cubie2 multi_lpae_defconfig : FAILED 1:21.79 omap5uevm omap2plus_defconfig : FAILED 1:45.92 omap5uevm multi_v7_defconfig : FAILED 1:51.72 omap5uevm multi_lpae_defconfig : FAILED 1:50.96 snowball u8500_defconfig : FAILED 1:53.07
Successful boards:
apc vt8500_v6_v7_defconfig : passed 1:15.24 arndale exynos_defconfig : passed 1:16.64 arndale multi_v7_defconfig : passed 1:40.74 arndale multi_lpae_defconfig : passed 1:26.63 bbb omap2plus_defconfig : passed 1:33.51 bbb multi_v7_defconfig : passed 1:25.14 beaver tegra_defconfig : passed 0:58.46 beaver multi_v7_defconfig : passed 1:02.67 capri bcm_defconfig : passed 0:39.89 capri multi_v7_defconfig : passed 0:41.05 cubie sunxi_defconfig : passed 1:20.13 cubie multi_v7_defconfig : passed 1:33.44 cubox multi_v7_defconfig : passed 1:14.96 dalmore tegra_defconfig : passed 1:27.09 dalmore multi_v7_defconfig : passed 1:28.09 dalmore multi_lpae_defconfig : passed 1:20.88 hummingboard imx_v6_v7_defconfig : passed 1:14.69 hummingboard multi_v7_defconfig : passed 1:14.49 jetson tegra_defconfig : passed 1:02.95 jetson multi_v7_defconfig : passed 0:56.55 jetson multi_lpae_defconfig : passed 1:00.07 panda omap2plus_defconfig : warnings 1:31.72 panda multi_v7_defconfig : warnings 1:50.13 sama5 sama5_defconfig : warnings 1:55.10 seaboard tegra_defconfig : passed 1:05.00 seaboard multi_v7_defconfig : passed 1:15.99 snow exynos_defconfig : passed 1:29.53 snow multi_v7_defconfig : passed 1:23.75 snow multi_lpae_defconfig : passed 1:22.71 snowball multi_v7_defconfig : passed 3:35.33 trimslice tegra_defconfig : passed 1:02.97 trimslice multi_v7_defconfig : passed 1:21.09 wandboard imx_v6_v7_defconfig : passed 1:09.50 wandboard multi_v7_defconfig : passed 1:19.07
Offline boards:
Board legend is available at http://arm-soc.lixom.net/boards.html
Last entries of failed logs below:
========================================================================
Board cubie2-multi_lpae_defconfig failure log: -------------------------------------------------
[ 1.329044] ahci-sunxi 1c18000.sata: AHCI 0001.0100 32 slots 1 ports 3 Gbps 0x1 impl platform mode [ 1.338011] ahci-sunxi 1c18000.sata: flags: ncq sntf pm led clo only pio slum part ccc [ 1.347550] scsi0 : ahci_platform [ 1.351267] ata1: SATA max UDMA/133 mmio [mem 0x01c18000-0x01c18fff] port 0x100 irq 88 [ 1.360007] ehci-platform 1c14000.usb: EHCI Host Controller [ 1.365655] ehci-platform 1c14000.usb: new USB bus registered, assigned bus number 1 [ 1.373720] ehci-platform 1c14000.usb: irq 71, io mem 0x01c14000 [ 1.379931] mmc0: new high speed SDHC card at address aaaa [ 1.385810] ehci-platform 1c14000.usb: USB 2.0 started, EHCI 1.00 [ 1.392096] mmcblk0: mmc0:aaaa SU16G 14.8 GiB [ 1.397638] hub 1-0:1.0: USB hub found [ 1.401876] hub 1-0:1.0: 1 port detected [ 1.405976] mmcblk0: p1 [ 1.410262] ehci-platform 1c1c000.usb: EHCI Host Controller [ 1.415955] ehci-platform 1c1c000.usb: new USB bus registered, assigned bus number 2 [ 1.423934] ehci-platform 1c1c000.usb: irq 72, io mem 0x01c1c000 [ 1.435316] ehci-platform 1c1c000.usb: USB 2.0 started, EHCI 1.00 [ 1.442285] hub 2-0:1.0: USB hub found [ 1.446137] hub 2-0:1.0: 1 port detected [ 1.451156] ohci-platform 1c14400.usb: Generic Platform OHCI controller [ 1.457860] ohci-platform 1c14400.usb: new USB bus registered, assigned bus number 3 [ 1.465702] ohci-platform 1c14400.usb: irq 96, io mem 0x01c14400 [ 1.530164] hub 3-0:1.0: USB hub found [ 1.534017] hub 3-0:1.0: 1 port detected [ 1.539012] ohci-platform 1c1c400.usb: Generic Platform OHCI controller [ 1.545731] ohci-platform 1c1c400.usb: new USB bus registered, assigned bus number 4 [ 1.553591] ohci-platform 1c1c400.usb: irq 97, io mem 0x01c1c400 [ 1.615132] hub 4-0:1.0: USB hub found [ 1.618975] hub 4-0:1.0: 1 port detected [ 1.623638] sunxi-rtc 1c20d00.rtc: setting system clock to 1970-01-01 00:00:14 UTC (14) [ 1.711196] No MAC Management Counters available [ 1.715970] stmmac_open: ERROR: allocating the WoL IRQ -61 (-22) [ 1.722597] IP-Config: Failed to open eth0 [ 1.726722] IP-Config: No network devices available [ 1.731639] vcc3v0: disabling [ 1.734717] ALSA device list: [ 1.737697] No soundcards found. [ 1.741834] ata1: SATA link down (SStatus 0 SControl 300) ~$off # PYBOOT: Exception: timeout
========================================================================
Board cubie2-multi_v7_defconfig failure log: -------------------------------------------------
[ 1.324377] ahci-sunxi 1c18000.sata: AHCI 0001.0100 32 slots 1 ports 3 Gbps 0x1 impl platform mode [ 1.333344] ahci-sunxi 1c18000.sata: flags: ncq sntf pm led clo only pio slum part ccc [ 1.342903] scsi0 : ahci_platform [ 1.346612] ata1: SATA max UDMA/133 mmio [mem 0x01c18000-0x01c18fff] port 0x100 irq 88 [ 1.355358] ehci-platform 1c14000.usb: EHCI Host Controller [ 1.361011] ehci-platform 1c14000.usb: new USB bus registered, assigned bus number 1 [ 1.369065] ehci-platform 1c14000.usb: irq 71, io mem 0x01c14000 [ 1.375269] mmc0: new high speed SDHC card at address aaaa [ 1.381144] ehci-platform 1c14000.usb: USB 2.0 started, EHCI 1.00 [ 1.387416] mmcblk0: mmc0:aaaa SU16G 14.8 GiB [ 1.392967] hub 1-0:1.0: USB hub found [ 1.397201] hub 1-0:1.0: 1 port detected [ 1.401297] mmcblk0: p1 [ 1.405601] ehci-platform 1c1c000.usb: EHCI Host Controller [ 1.411285] ehci-platform 1c1c000.usb: new USB bus registered, assigned bus number 2 [ 1.419267] ehci-platform 1c1c000.usb: irq 72, io mem 0x01c1c000 [ 1.430651] ehci-platform 1c1c000.usb: USB 2.0 started, EHCI 1.00 [ 1.437666] hub 2-0:1.0: USB hub found [ 1.441505] hub 2-0:1.0: 1 port detected [ 1.446507] ohci-platform 1c14400.usb: Generic Platform OHCI controller [ 1.453195] ohci-platform 1c14400.usb: new USB bus registered, assigned bus number 3 [ 1.461033] ohci-platform 1c14400.usb: irq 96, io mem 0x01c14400 [ 1.525523] hub 3-0:1.0: USB hub found [ 1.529366] hub 3-0:1.0: 1 port detected [ 1.534381] ohci-platform 1c1c400.usb: Generic Platform OHCI controller [ 1.541106] ohci-platform 1c1c400.usb: new USB bus registered, assigned bus number 4 [ 1.548948] ohci-platform 1c1c400.usb: irq 97, io mem 0x01c1c400 [ 1.610489] hub 4-0:1.0: USB hub found [ 1.614333] hub 4-0:1.0: 1 port detected [ 1.618999] sunxi-rtc 1c20d00.rtc: setting system clock to 1970-01-01 00:00:14 UTC (14) [ 1.706521] No MAC Management Counters available [ 1.711291] stmmac_open: ERROR: allocating the WoL IRQ -61 (-22) [ 1.717910] IP-Config: Failed to open eth0 [ 1.722033] IP-Config: No network devices available [ 1.726953] vcc3v0: disabling [ 1.730036] ALSA device list: [ 1.733015] No soundcards found. [ 1.737157] ata1: SATA link down (SStatus 0 SControl 300) ~$off # PYBOOT: Exception: timeout
========================================================================
Board cubie2-sunxi_defconfig failure log: -------------------------------------------------
[ 0.993990] mmc0: new high speed SDHC card at address aaaa [ 0.999918] mmcblk0: mmc0:aaaa SU16G 14.8 GiB [ 1.005926] mmcblk0: p1 [ 1.016186] ahci-sunxi 1c18000.sata: controller can't do PMP, turning off CAP_PMP [ 1.023669] ahci-sunxi 1c18000.sata: forcing PORTS_IMPL to 0x1 [ 1.029582] ahci-sunxi 1c18000.sata: AHCI 0001.0100 32 slots 1 ports 3 Gbps 0x1 impl platform mode [ 1.038552] ahci-sunxi 1c18000.sata: flags: ncq sntf pm led clo only pio slum part ccc [ 1.047445] scsi0 : ahci_platform [ 1.051089] ata1: SATA max UDMA/133 mmio [mem 0x01c18000-0x01c18fff] port 0x100 irq 88 [ 1.059361] ehci-platform 1c14000.usb: EHCI Host Controller [ 1.064959] ehci-platform 1c14000.usb: new USB bus registered, assigned bus number 1 [ 1.072828] ehci-platform 1c14000.usb: irq 71, io mem 0x01c14000 [ 1.096112] ehci-platform 1c14000.usb: USB 2.0 started, EHCI 1.00 [ 1.103073] hub 1-0:1.0: USB hub found [ 1.106910] hub 1-0:1.0: 1 port detected [ 1.111380] ehci-platform 1c1c000.usb: EHCI Host Controller [ 1.117017] ehci-platform 1c1c000.usb: new USB bus registered, assigned bus number 2 [ 1.124853] ehci-platform 1c1c000.usb: irq 72, io mem 0x01c1c000 [ 1.146105] ehci-platform 1c1c000.usb: USB 2.0 started, EHCI 1.00 [ 1.152997] hub 2-0:1.0: USB hub found [ 1.156824] hub 2-0:1.0: 1 port detected [ 1.161272] ohci-platform 1c14400.usb: Generic Platform OHCI controller [ 1.167946] ohci-platform 1c14400.usb: new USB bus registered, assigned bus number 3 [ 1.175786] ohci-platform 1c14400.usb: irq 96, io mem 0x01c14400 [ 1.240920] hub 3-0:1.0: USB hub found [ 1.244716] hub 3-0:1.0: 1 port detected [ 1.249233] ohci-platform 1c1c400.usb: Generic Platform OHCI controller [ 1.255866] ohci-platform 1c1c400.usb: new USB bus registered, assigned bus number 4 [ 1.263742] ohci-platform 1c1c400.usb: irq 97, io mem 0x01c1c400 [ 1.330940] hub 4-0:1.0: USB hub found [ 1.334727] hub 4-0:1.0: 1 port detected [ 1.339086] sunxi-rtc 1c20d00.rtc: setting system clock to 1970-01-01 00:00:15 UTC (15) [ 1.426133] ata1: SATA link down (SStatus 0 SControl 300) [ 1.442422] No MAC Management Counters available [ 1.447185] stmmac_open: ERROR: allocating the WoL IRQ -61 (-22) [ 1.453785] IP-Config: Failed to open eth0 [ 1.457912] IP-Config: No network devices available [ 1.462809] vcc3v0: disabling ~$off # PYBOOT: Exception: timeout
========================================================================
Board omap5uevm-multi_lpae_defconfig failure log: -------------------------------------------------
[ 47.092546] NET: Registered protocol family 17 [ 47.092572] mmcblk0boot1: mmc0:0001 SEM04G partition 2 2.00 MiB [ 47.102160] mmcblk0: unknown partition table [ 47.102936] mmcblk0boot1: unknown partition table [ 47.103699] mmcblk0boot0: unknown partition table [ 47.117938] can: controller area network core (rev 20120528 abi 9) [ 47.124430] NET: Registered protocol family 29 [ 47.129077] can: raw protocol (rev 20120528) [ 47.133542] can: broadcast manager protocol (rev 20120528 t) [ 47.139465] can: netlink gateway (rev 20130117) max_hops=1 [ 47.145469] Key type dns_resolver registered [ 47.149996] omap_vc_init_channel: No PMIC info for vdd_core [ 47.155822] omap_vp_init: No PMIC info for vdd_core [ 47.160914] omap_vc_init_channel: No PMIC info for vdd_mm [ 47.166556] omap_vp_init: No PMIC info for vdd_mm [ 47.171463] omap_vc_init_channel: No PMIC info for vdd_mpu [ 47.177201] omap_vp_init: No PMIC info for vdd_mpu [ 47.182491] ThumbEE CPU extension supported. [ 47.186962] Registering SWP/SWPB emulation handler [ 47.193153] palmas 0-0048: Irq flag is 0x00000000 [ 47.200826] palmas 0-0048: Muxing GPIO 2, PWM 0, LED 0 [ 47.208412] smps123: 600 <--> 1500 mV at 1060 mV [ 47.214514] smps45: 600 <--> 1310 mV at 1030 mV [ 47.220972] smps6: 1200 mV [ 47.224970] smps7: 1800 mV [ 47.229101] smps8: 600 <--> 1310 mV at 1040 mV [ 47.234823] smps9: failed to get the current voltage [ 47.240072] palmas-pmic 48070000.i2c:palmas@48:palmas_pmic: failed to register 48070000.i2c:palmas@48:palmas_pmic regulator [ 47.252120] palmas-pmic: probe of 48070000.i2c:palmas@48:palmas_pmic failed with error -22 [ 47.376798] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 47.521807] omap_i2c 4807c000.i2c: bus 4 rev0.12 at 400 kHz [ 47.527880] platform 4a140000.sata: Driver ahci requests probe deferral [ 47.535320] omap_hsmmc 4809c000.mmc: unable to get vmmc regulator -517 [ 47.542187] platform 4809c000.mmc: Driver omap_hsmmc requests probe deferral [ 47.549903] /home/build/work/batch/drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 47.563344] ALSA device list: [ 47.566440] No soundcards found. [ 47.570443] Waiting for root device /dev/mmcblk1p2... ~$off # PYBOOT: Exception: timeout
========================================================================
Board omap5uevm-multi_v7_defconfig failure log: -------------------------------------------------
[ 47.516631] can: raw protocol (rev 20120528) [ 47.516638] can: broadcast manager protocol (rev 20120528 t) [ 47.516650] can: netlink gateway (rev 20130117) max_hops=1 [ 47.516957] Key type dns_resolver registered [ 47.517037] omap_vc_init_channel: No PMIC info for vdd_core [ 47.517039] omap_vp_init: No PMIC info for vdd_core [ 47.517043] omap_vc_init_channel: No PMIC info for vdd_mm [ 47.517045] omap_vp_init: No PMIC info for vdd_mm [ 47.517048] omap_vc_init_channel: No PMIC info for vdd_mpu [ 47.517050] omap_vp_init: No PMIC info for vdd_mpu [ 47.517365] ThumbEE CPU extension supported. [ 47.517378] Registering SWP/SWPB emulation handler [ 47.522540] palmas 0-0048: Irq flag is 0x00000000 [ 47.600283] palmas 0-0048: Muxing GPIO 2, PWM 0, LED 0 [ 47.606956] mmc0: new high speed MMC card at address 0001 [ 47.612885] mmcblk0: mmc0:0001 SEM04G 3.68 GiB [ 47.617698] mmcblk0boot0: mmc0:0001 SEM04G partition 1 2.00 MiB [ 47.623976] mmcblk0boot1: mmc0:0001 SEM04G partition 2 2.00 MiB [ 47.630619] smps123: 600 <--> 1500 mV at 1060 mV [ 47.635568] mmcblk0: unknown partition table [ 47.641058] mmcblk0boot1: unknown partition table [ 47.646305] smps45: 600 <--> 1310 mV at 1030 mV [ 47.651564] mmcblk0boot0: unknown partition table [ 47.657769] smps6: 1200 mV [ 47.661798] smps7: 1800 mV [ 47.665906] smps8: 600 <--> 1310 mV at 1040 mV [ 47.671654] smps9: failed to get the current voltage [ 47.676903] palmas-pmic 48070000.i2c:palmas@48:palmas_pmic: failed to register 48070000.i2c:palmas@48:palmas_pmic regulator [ 47.688956] palmas-pmic: probe of 48070000.i2c:palmas@48:palmas_pmic failed with error -22 [ 47.816815] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 47.961826] omap_i2c 4807c000.i2c: bus 4 rev0.12 at 400 kHz [ 47.967914] platform 4a140000.sata: Driver ahci requests probe deferral [ 47.975365] omap_hsmmc 4809c000.mmc: unable to get vmmc regulator -517 [ 47.982216] platform 4809c000.mmc: Driver omap_hsmmc requests probe deferral [ 47.989932] /home/build/work/batch/drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 48.003365] ALSA device list: [ 48.006465] No soundcards found. [ 48.010470] Waiting for root device /dev/mmcblk1p2... ~$off # PYBOOT: Exception: timeout
========================================================================
Board omap5uevm-omap2plus_defconfig failure log: -------------------------------------------------
[ 2.003038] NET: Registered protocol family 15 [ 2.003214] Key type dns_resolver registered [ 2.003310] omap_vc_init_channel: No PMIC info for vdd_core [ 2.003313] omap_vp_init: No PMIC info for vdd_core [ 2.003323] omap_vc_init_channel: No PMIC info for vdd_mm [ 2.003326] omap_vp_init: No PMIC info for vdd_mm [ 2.003336] omap_vc_init_channel: No PMIC info for vdd_mpu [ 2.003339] omap_vp_init: No PMIC info for vdd_mpu [ 2.003897] ThumbEE CPU extension supported. [ 2.003918] Registering SWP/SWPB emulation handler [ 2.003927] SmartReflex Class3 initialized [ 2.021002] palmas 0-0048: Irq flag is 0x00000000 [ 2.111532] mmcblk0: mmc0:0001 SEM04G 3.68 GiB [ 2.116616] mmcblk0boot0: mmc0:0001 SEM04G partition 1 2.00 MiB [ 2.123065] mmcblk0boot1: mmc0:0001 SEM04G partition 2 2.00 MiB [ 2.132145] mmcblk0: unknown partition table [ 2.138766] mmcblk0boot1: unknown partition table [ 2.145045] palmas 0-0048: Muxing GPIO 2, PWM 0, LED 0 [ 2.145685] mmcblk0boot0: unknown partition table [ 2.203307] smps123: 600 <--> 1500 mV at 1060 mV [ 2.210323] smps45: 600 <--> 1310 mV at 1030 mV [ 2.217639] smps6: 1200 mV [ 2.222422] smps7: 1800 mV [ 2.227373] smps8: 600 <--> 1310 mV at 1040 mV [ 2.233866] smps9: failed to get the current voltage [ 2.239867] palmas-pmic 48070000.i2c:palmas@48:palmas_pmic: failed to register 48070000.i2c:palmas@48:palmas_pmic regulator [ 2.254213] palmas-pmic: probe of 48070000.i2c:palmas@48:palmas_pmic failed with error -22 [ 2.263057] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 2.270766] omap_i2c 4807c000.i2c: bus 4 rev0.12 at 400 kHz [ 2.276913] of_get_named_gpiod_flags: can't parse gpios property of node '/ocp/mmc@4809c000[0]' [ 2.286025] of_get_named_gpiod_flags: can't parse gpios property of node '/ocp/mmc@4809c000[0]' [ 2.295382] omap_hsmmc 4809c000.mmc: unable to get vmmc regulator -517 [ 2.302332] platform 4809c000.mmc: Driver omap_hsmmc requests probe deferral [ 2.310806] /home/build/work/batch/drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 2.319442] sr_init: No PMIC hook to init smartreflex [ 2.324974] sr_init: platform driver register failed for SR [ 2.353101] pbias_mmc_omap5: disabling [ 2.358631] Waiting for root device /dev/mmcblk1p2... ~$off # PYBOOT: Exception: timeout
========================================================================
Board snowball-u8500_defconfig failure log: -------------------------------------------------
[ 3.637359] platform musb-hdrc.22.auto: Driver musb-hdrc requests probe deferral [ 3.645294] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.22.auto [ 3.657196] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.22.auto) status -22 [ 3.664520] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.675994] musb-ux500 musb-hdrc.22.auto: Error applying setting, reverse things back [ 3.684509] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.23.auto [ 3.696441] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.23.auto) status -22 [ 3.703735] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.715240] musb-hdrc musb-hdrc.23.auto: Error applying setting, reverse things back [ 3.723052] HS USB OTG: no transceiver configured [ 3.727752] musb-hdrc musb-hdrc.23.auto: musb_init_controller failed with status -517 [ 3.735595] platform musb-hdrc.23.auto: Driver musb-hdrc requests probe deferral [ 3.743530] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.23.auto [ 3.755432] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.23.auto) status -22 [ 3.762756] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.774230] musb-ux500 musb-hdrc.23.auto: Error applying setting, reverse things back [ 3.782775] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.24.auto [ 3.794677] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.24.auto) status -22 [ 3.802001] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.813476] musb-hdrc musb-hdrc.24.auto: Error applying setting, reverse things back [ 3.821319] HS USB OTG: no transceiver configured [ 3.826019] musb-hdrc musb-hdrc.24.auto: musb_init_controller failed with status -517 [ 3.833862] platform musb-hdrc.24.auto: Driver musb-hdrc requests probe deferral [ 3.841766] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.24.auto [ 3.853698] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.24.auto) status -22 [ 3.861022] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.872497] musb-ux500 musb-hdrc.24.auto: Error applying setting, reverse things back [ 3.881042] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.25.auto [ 3.892944] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.25.auto) status -22 [ 3.900268] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.911743] musb-hdrc musb-hdrc.25.auto: Error applying setting, reverse things back [ 3.919555] HS USB OTG: no transceiver configured [ 3.924255] musb-hdrc musb-hdrc.25.auto: musb_init_controller failed with status -517 [ 3.932128] platform musb-hdrc.25.auto: Driver musb-hdrc requests probe deferral [ 3.940032] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.25.auto [ 3.951934] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.25.auto) status -22 [ 3.959259] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.970733] musb-ux500 musb-hdrc.25.auto: Error applying setting, reverse things back ~$off # PYBOOT: Exception: timeout
kernel-build-reports@lists.linaro.org
-
Olof's autobooter