next boot: 46 pass, 2 fail (next-20140228) - Kernel-build-reports

28 Feb 2014


      Automated DT boot report for various ARM defconfigs.
Tree/Branch: next
Git describe: next-20140228
Failed boot tests (console logs at the end)
===========================================
                ste-snowball:     FAIL:    multi_v7_defconfig
                   da850-evm:     FAIL:    davinci_all_defconfig
Full Report
===========
da8xx_omapl_defconfig
---------------------
                   da850-evm     PASS:    0 min 15.4 sec
omap2plus_defconfig
-------------------
               legacy,3730xm     PASS:    0 min 50.1 sec
            am335x-boneblack     PASS:    0 min 25.9 sec
             omap3-beagle-xm     PASS:    0 min 56.9 sec
           legacy,3530beagle     PASS:    0 min 51.0 sec
                 omap4-panda     PASS:    1 min  8.0 sec
            omap3-overo-tobi     PASS:    0 min 23.5 sec
                 am335x-bone     PASS:    0 min 27.5 sec
      omap3-overo-storm-tobi     PASS:    0 min 22.5 sec
                  omap5-uevm     PASS:    1 min  3.5 sec
              omap4-panda-es     PASS:    1 min  6.7 sec
            legacy,3730storm     PASS:    0 min 23.6 sec
            legacy,3530overo     PASS:    0 min 21.4 sec
multi_lpae_defconfig
--------------------
                  omap5-uevm     PASS:    1 min 46.4 sec
       sun7i-a20-cubieboard2     PASS:    0 min 14.4 sec
tegra_defconfig
---------------
              tegra30-beaver     PASS:    0 min 17.1 sec
imx_v6_v7_defconfig
-------------------
  imx6dl-wandboard,wand-dual     PASS:    0 min 18.5 sec
  imx6dl-wandboard,wand-solo     PASS:    0 min 18.6 sec
             imx6q-wandboard     PASS:    0 min 17.0 sec
sunxi_defconfig
---------------
       sun7i-a20-cubieboard2     PASS:    0 min 12.9 sec
        sun4i-a10-cubieboard     PASS:    0 min 12.6 sec
bcm_defconfig
-------------
                 bcm28155-ap     PASS:    0 min 58.8 sec
mvebu_v7_defconfig
------------------
  armada-xp-openblocks-ax3-4     PASS:    0 min 22.2 sec
          armada-370-mirabox     PASS:    0 min 20.2 sec
exynos_defconfig
----------------
          exynos5250-arndale     PASS:    0 min 27.9 sec
multi_v7_defconfig
------------------
    qcom-apq8074-dragonboard     PASS:    1 min  4.2 sec
                ste-snowball     FAIL:    0 min 33.7 sec
              tegra30-beaver     PASS:    0 min 17.1 sec
            am335x-boneblack     PASS:    0 min 23.8 sec
             omap3-beagle-xm     PASS:    0 min 46.6 sec
       sun7i-a20-cubieboard2     PASS:    0 min 14.5 sec
          armada-370-mirabox     PASS:    0 min 22.3 sec
                 omap4-panda     PASS:    1 min 17.0 sec
  armada-xp-openblocks-ax3-4     PASS:    0 min 26.1 sec
        sun4i-a10-cubieboard     PASS:    0 min 19.2 sec
                 bcm28155-ap     PASS:    1 min  9.3 sec
            omap3-overo-tobi     PASS:    0 min 21.8 sec
  imx6dl-wandboard,wand-solo     PASS:    0 min 18.2 sec
                 am335x-bone     PASS:    0 min 26.6 sec
      omap3-overo-storm-tobi     PASS:    0 min 24.2 sec
                  omap5-uevm     PASS:    1 min 42.8 sec
             imx6q-wandboard     PASS:    0 min 17.6 sec
              omap4-panda-es     PASS:    0 min 53.6 sec
  imx6dl-wandboard,wand-dual     PASS:    0 min 18.3 sec
u8500_defconfig
---------------
                ste-snowball     PASS:    0 min 30.9 sec
sama5_defconfig
---------------
                  sama5d35ek     PASS:    0 min 17.1 sec
davinci_all_defconfig
---------------------
             legacy,dm365evm     PASS:    0 min 17.0 sec
                   da850-evm     FAIL:    0 min 21.0 sec
Console logs for failures
=========================
multi_v7_defconfig
------------------
ste-snowball: FAIL: last 80 lines of boot log:
    ----------------------------------------------
(user:khilman) Reboot snowball
Reboot: snowball ; ip9258 2 2 :  ('off', 6, 'on')
, sleep 6,
MCDE:  startup failed
sec_bridge: ISSWAPI_FLUSH_BOOT_CODE: 2
EMMC: 0, MMC: 1
In:    serial
Out:   serial
Err:   serial
Net:   smc911x-0
Hit any key to stop autoboot:  1  0
U8500 $ 
U8500 $ version
U8500 $ versionsetenv ethaddr 6e:e6:84:36:8e:9e
U-Boot 2009.11 (sept. 19 2011 - 17:03:11)
U8500 $ setenv ethaddr 6e:e6:84:36:8e:9esetenv bootargs console=ttyAMA2,115200n8 debug earlyprintk rw root=/dev/mmcblk0p3 rootwait rootfstype=ext4
Can't overwrite "ethaddr"
U8500 $ setenv bootargs console=ttyAMA2,115200n8 debug earlyprintk rw root=/dev/mmcblk0p3 rootwait rootfstype=ext4setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}::::192.168.1.254:none'
U8500 $ setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}::::192.168.1.254:none'if test -n ${initenv}; then run initenv; fi
U8500 $ if test -n ${initenv}; then run initenv; fiif test -n ${preboot}; then run preboot; fi
U8500 $ if test -n ${preboot}; then run preboot; fisetenv autoload no; setenv autoboot no
U8500 $ setenv autoload no; setenv autoboot nodhcp
U8500 $ dhcp
smc911x: detected LAN9221 controller
smc911x: phy initialized
smc911x: MAC 6e:e6:84:36:8e:9e
BOOTP broadcast 1
BOOTP broadcast 2
DHCP client bound to address 192.168.1.159
U8500 $ setenv serverip 192.168.1.2
setenv serverip 192.168.1.2
U8500 $ if test -n ${netargs}; then run netargs; fi
if test -n ${netargs}; then run netargs; fi
U8500 $ tftp 0x00800000 192.168.1.2:tmp/snowball-1L1fvV/tmpOs8QC6-uImage
tftp 0x00800000 192.168.1.2:tmp/snowball-1L1fvV/tmpOs8QC6-uImage
smc911x: detected LAN9221 controller
smc911x: phy initialized
smc911x: MAC 6e:e6:84:36:8e:9e
Using smc911x-0 device
TFTP from server 192.168.1.2; our IP address is 192.168.1.159
Filename 'tmp/snowball-1L1fvV/tmpOs8QC6-uImage'.
Load address: 0x800000
Loading: *#################################################################
     #################################################################
     #################################################################
     #################################################################
     #####################################################
done
Bytes transferred = 4587585 (460041 hex)
U8500 $ printenv bootargs
printenv bootargs
bootargs=console=ttyAMA2,115200n8 debug earlyprintk rw root=/dev/mmcblk0p3 rootwait rootfstype=ext4 ip=192.168.1.159:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none
U8500 $bootm 0x00800000  
 bootm 0x00800000  
## Booting kernel from Legacy Image at 00800000 ...
   Image Name:   Linux
   Image Type:   ARM Linux Kernel Image (uncompressed)
   Data Size:    4587521 Bytes =  4.4 MB
   Load Address: 00008000
   Entry Point:  00008000
   Loading Kernel Image ... OK
OK
Starting kernel ...
~$off
# PYBOOT: Exception: kernel: ERROR: did not start booting.
# PYBOOT: Time: 33.68 seconds.
# PYBOOT: Result: FAIL
davinci_all_defconfig
---------------------
da850-evm: FAIL: last 80 lines of boot log:
    -------------------------------------------
Err:   serial
SF: Detected M25P64 with page size 256 Bytes, erase size 64 KiB, total 8 MiB
Net:   DaVinci-EMAC
Hit any key to stop autoboot:  
3  0 
U-Boot > 
U-Boot > version
version
U-Boot 2014.01-dirty (Feb 27 2014 - 15:12:48)
arm-linux-gnueabi-gcc (Ubuntu/Linaro 4.7.3-1ubuntu1) 4.7.3
GNU ld (GNU Binutils for Ubuntu) 2.23.52.20130913
U-Boot > setenv bootargs console=ttyS2,115200n8 debug earlyprintk
setenv bootargs console=ttyS2,115200n8 debug earlyprintk
U-Boot >if test -n ${initenv}; then run initenv; fi
 if test -n ${initenv}; then run initenv; fi
U-Boot > if test -n ${preboot}; then run preboot; fi
if test -n ${preboot}; then run preboot; fi
U-Boot >setenv autoload no; setenv autoboot no
 setenv autoload no; setenv autoboot no
U-Boot > dhcp
dhcp
BOOTP broadcast 1
DHCP client bound to address 192.168.1.194
U-Boot >setenv serverip 192.168.1.2
 setenv serverip 192.168.1.2
U-Boot > if test -n ${netargs}; then run netargs; fi
if test -n ${netargs}; then run netargs; fi
U-Boot > tftp 0xc0800000 192.168.1.2:tmp/da850evm-Ks80k6/zImage
tftp 0xc0800000 192.168.1.2:tmp/da850evm-Ks80k6/zImage
Using DaVinci-EMAC device
TFTP from server 192.168.1.2; our IP address is 192.168.1.194
Filename 'tmp/da850evm-Ks80k6/zImage'.
Load address: 0xc0800000
Loading: *#################################################################
     #################################################################
     ################
     1.7 MiB/s
done
Bytes transferred = 2135008 (2093e0 hex)
U-Boot > tftp 0xc0c00000 192.168.1.2:buildroot.cpio.gz.uboot
tftp 0xc0c00000 192.168.1.2:buildroot.cpio.gz.uboot
Using DaVinci-EMAC device
TFTP from server 192.168.1.2; our IP address is 192.168.1.194
Filename 'buildroot.cpio.gz.uboot'.
Load address: 0xc0c00000
Loading: *############################################
     1.7 MiB/s
done
Bytes transferred = 642602 (9ce2a hex)
U-Boot > tftp 0xc07f0000 192.168.1.2:tmp/da850evm-Ks80k6/da850-evm.dtb
tftp 0xc07f0000 192.168.1.2:tmp/da850evm-Ks80k6/da850-evm.dtb
Using DaVinci-EMAC device
TFTP from server 192.168.1.2; our IP address is 192.168.1.194
Filename 'tmp/da850evm-Ks80k6/da850-evm.dtb'.
Load address: 0xc07f0000
Loading: *#
     1.1 MiB/s
done
Bytes transferred = 6935 (1b17 hex)
U-Boot > printenv bootargs
printenv bootargs
bootargs=console=ttyS2,115200n8 debug earlyprintk
U-Boot >bootz 0xc0800000 0xc0c00000 0xc07f0000
 bootz 0xc0800000 0xc0c00000 0xc07f0000
Kernel image @ 0xc0800000 [ 0x000000 - 0x2093e0 ]
## Loading init Ramdisk from Legacy Image at c0c00000 ...
   Image Name:   
   Image Type:   ARM Linux RAMDisk Image (uncompressed)
   Data Size:    642538 Bytes = 627.5 KiB
   Load Address: 00000000
   Entry Point:  00000000
   Verifying Checksum ... OK
Starting kernel ...
~$off
# PYBOOT: Exception: kernel: ERROR: did not start booting.
# PYBOOT: Time: 20.97 seconds.
# PYBOOT: Result: FAIL