Failed boards:
apc vt8500_v6_v7_defconfig : FAILED 1:14.03 cubie multi_v7_defconfig : FAILED 1:04.61 cubie2 sunxi_defconfig : FAILED 1:20.74 cubie2 multi_v7_defconfig : FAILED 1:11.98 cubie2 multi_lpae_defconfig : FAILED 0:59.31 hummingboard multi_v7_defconfig : FAILED 1:04.48 panda multi_v7_defconfig : FAILED 1:34.18 snowball multi_v7_defconfig : FAILED 1:10.48 wandboard multi_v7_defconfig : FAILED 1:09.05
Successful boards:
arndale exynos_defconfig : passed 1:18.88 bbb omap2plus_defconfig : passed 1:36.69 bbb multi_v7_defconfig : passed 1:21.46 beaver tegra_defconfig : passed 0:55.65 beaver multi_v7_defconfig : passed 0:49.45 capri bcm_defconfig : passed 0:43.06 capri multi_v7_defconfig : passed 0:44.45 cubie sunxi_defconfig : passed 1:12.58 dalmore tegra_defconfig : passed 1:20.39 dalmore multi_v7_defconfig : passed 1:18.60 dalmore multi_lpae_defconfig : passed 1:20.56 hummingboard imx_v6_v7_defconfig : passed 1:20.93 omap5uevm multi_v7_defconfig : warnings 1:40.25 omap5uevm multi_lpae_defconfig : warnings 1:38.88 panda omap2plus_defconfig : warnings 1:15.02 sama5 sama5_defconfig : passed 1:49.77 seaboard tegra_defconfig : passed 0:59.96 seaboard multi_v7_defconfig : passed 1:09.38 snow exynos_defconfig : passed 1:32.18 snowball u8500_defconfig : passed 1:16.94 trimslice tegra_defconfig : passed 0:57.53 trimslice multi_v7_defconfig : passed 1:05.95 wandboard imx_v6_v7_defconfig : passed 0:56.79
Offline boards:
omap5uevm omap2plus_defconfig : OFFLINE 2:21.82
Board legend is available at http://arm-soc.lixom.net/boards.html
Last entries of failed logs below:
========================================================================
Board apc-vt8500_v6_v7_defconfig failure log: -------------------------------------------------
WMT # setenv serverip 172.16.1.3 setenv serverip 172.16.1.3 WMT # tftp 0x1000000 tmp/apc-JnR_kN/tmpxpnK4B-uImage tftp 0x1000000 tmp/apc-JnR_kN/tmpxpnK4B-uImage TFTP from server 172.16.1.3; our IP address is 172.16.1.104 Filename 'tmp/apc-JnR_kN/tmpxpnK4B-uImage'. Load address: 0x1000000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# #################### done Bytes transferred = 2427734 (250b56 hex) WMT # setenv bootargs console=ttyWMT0,115200n8 earlyprintk debug root=/dev/sda1 rootwait rw setenv bootargs console=ttyWMT,115200n8 earlyprintk debug root=/dev/sda1 rootwait rw WMT # printenv bootargs printenv bootargs bootargs=console=ttyWMT,115200n8 earlyprintk debug root=/dev/sda1 rootwait rw WMT # bootm 0x1000000 bootm 0x1000000 ## Booting image at 01000000 ... Image Name: Linux Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 2427670 Bytes = 2.3 MB Load Address: 00008000 Entry Point: 00008000 Verifying Checksum ... OK OK
Starting kernel ...
Debian GNU/Linux 7 apc ttyWMT0
apc login: ~$off # PYBOOT: Exception: timeout
========================================================================
Board cubie-multi_v7_defconfig failure log: -------------------------------------------------
tftp 0x40008000 next/next-20140403/multi_v7_defconfig/zImage Using emac device TFTP from server 172.16.1.3; our IP address is 172.16.1.145 Filename 'next/next-20140403/multi_v7_defconfig/zImage'. Load address: 0x40008000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ######################################################### 2.8 MiB/s done Bytes transferred = 4642056 (46d508 hex) sun4i#setenv serverip 172.16.1.3 setenv serverip 172.16.1.3 sun4i#tftp 0x41000000 next/next-20140403/multi_v7_defconfig/dtbs/sun4i-a10-cubieboard.dtb tftp 0x41000000 next/next-20140403/multi_v7_defconfig/dtbs/sun4i-a10-cubieboard.dtb Using emac device TFTP from server 172.16.1.3; our IP address is 172.16.1.145 Filename 'next/next-20140403/multi_v7_defconfig/dtbs/sun4i-a10-cubieboard.dtb'. Load address: 0x41000000 Loading: *## 706.1 KiB/s done Bytes transferred = 15184 (3b50 hex) sun4i#printenv bootargs printenv bootargs bootargs=console=ttyS0,115200n8 root=/dev/nfs rootwait rw nfsroot=172.16.1.7:/work/nfsroot/cubie ip=dhcp sun4i#bootz 0x40008000 - 0x41000000 bootz 0x40008000 - 0x41000000 Kernel image @ 0x40008000 [ 0x000000 - 0x46d508 ] ## Flattened Device Tree blob at 41000000 Booting using the fdt blob at 0x41000000 Loading Device Tree to 40ff9000, end 40fffb4f ... OK
Starting kernel ...
node: cubie status: on ~$off # PYBOOT: Exception: timeout
========================================================================
Board cubie2-multi_lpae_defconfig failure log: -------------------------------------------------
sun7i# tftp 0x40008000 next/next-20140403/multi_lpae_defconfig/zImage tftp 0x40008000 next/next-20140403/multi_lpae_defconfig/zImage Using emac device TFTP from server 172.16.1.3; our IP address is 172.16.1.161 Filename 'next/next-20140403/multi_lpae_defconfig/zImage'. Load address: 0x40008000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ########################################################### 3.9 MiB/s done Bytes transferred = 4668680 (473d08 hex) sun7i# setenv serverip 172.16.1.3 setenv serverip 172.16.1.3 sun7i# tftp 0x41000000 next/next-20140403/multi_lpae_defconfig/dtbs/sun7i-a20-cubieboard2.dtb tftp 0x41000000 next/next-20140403/multi_lpae_defconfig/dtbs/sun7i-a20-cubieboard2.dtb Using emac device TFTP from server 172.16.1.3; our IP address is 172.16.1.161 Filename 'next/next-20140403/multi_lpae_defconfig/dtbs/sun7i-a20-cubieboard2.dtb'. Load address: 0x41000000 Loading: *## 1 MiB/s done Bytes transferred = 18361 (47b9 hex) sun7i#printenv bootargs printenv bootargs bootargs=console=ttyS0,115200n8 root=/dev/nfs rootwait rw nfsroot=172.16.1.7:/work/nfsroot/cubie2 ip=dhcp sun7i# bootz 0x40008000 - 0x41000000 bootz 0x40008000 - 0x41000000 Kernel image @ 0x40008000 [ 0x000000 - 0x473d08 ] ## Flattened Device Tree blob at 41000000 Booting using the fdt blob at 0x41000000 Loading Device Tree to 40ff8000, end 40fff7b8 ... OK
Starting kernel ...
~$off # PYBOOT: Exception: timeout
========================================================================
Board cubie2-multi_v7_defconfig failure log: -------------------------------------------------
tftp 0x40008000 next/next-20140403/multi_v7_defconfig/zImage Using emac device TFTP from server 172.16.1.3; our IP address is 172.16.1.161 Filename 'next/next-20140403/multi_v7_defconfig/zImage'. Load address: 0x40008000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ######################################################### 4 MiB/s done Bytes transferred = 4642056 (46d508 hex) sun7i# setenv serverip 172.16.1.3 setenv serverip 172.16.1.3 sun7i# tftp 0x41000000 next/next-20140403/multi_v7_defconfig/dtbs/sun7i-a20-cubieboard2.dtb tftp 0x41000000 next/next-20140403/multi_v7_defconfig/dtbs/sun7i-a20-cubieboard2.dtb Using emac device TFTP from server 172.16.1.3; our IP address is 172.16.1.161 Filename 'next/next-20140403/multi_v7_defconfig/dtbs/sun7i-a20-cubieboard2.dtb'. Load address: 0x41000000 Loading: *## 1 MiB/s done Bytes transferred = 18361 (47b9 hex) sun7i# printenv bootargs printenv bootargs bootargs=console=ttyS0,115200n8 root=/dev/nfs rootwait rw nfsroot=172.16.1.7:/work/nfsroot/cubie2 ip=dhcp sun7i# bootz 0x40008000 - 0x41000000 bootz 0x40008000 - 0x41000000 Kernel image @ 0x40008000 [ 0x000000 - 0x46d508 ] ## Flattened Device Tree blob at 41000000 Booting using the fdt blob at 0x41000000 Loading Device Tree to 40ff8000, end 40fff7b8 ... OK
Starting kernel ...
node: cubie2 status: on ~$off # PYBOOT: Exception: timeout
========================================================================
Board cubie2-sunxi_defconfig failure log: -------------------------------------------------
[ 0.017713] platform ahci-5v.2: Driver reg-fixed-voltage requests probe deferral [ 0.017738] reg-fixed-voltage usb1-vbus.3: could not find pctldev for node /soc@01c00000/pinctrl@01c20800/usb1_vbus_pin@0, deferring probe [ 0.017750] platform usb1-vbus.3: Driver reg-fixed-voltage requests probe deferral [ 0.017769] reg-fixed-voltage usb2-vbus.4: could not find pctldev for node /soc@01c00000/pinctrl@01c20800/usb2_vbus_pin@0, deferring probe [ 0.017782] platform usb2-vbus.4: Driver reg-fixed-voltage requests probe deferral [ 0.018730] Switched to clocksource arch_sys_counter [ 0.025824] NET: Registered protocol family 2 [ 0.026285] TCP established hash table entries: 8192 (order: 3, 32768 bytes) [ 0.026375] TCP bind hash table entries: 8192 (order: 4, 65536 bytes) [ 0.026496] TCP: Hash tables configured (established 8192 bind 8192) [ 0.026582] TCP: reno registered [ 0.026596] UDP hash table entries: 512 (order: 2, 16384 bytes) [ 0.026653] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) [ 0.026852] NET: Registered protocol family 1 [ 0.027246] RPC: Registered named UNIX socket transport module. [ 0.027257] RPC: Registered udp transport module. [ 0.027263] RPC: Registered tcp transport module. [ 0.027271] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.028223] futex hash table entries: 512 (order: 3, 32768 bytes) [ 0.028702] bounce pool size: 64 pages [ 0.036543] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 0.036562] io scheduler noop registered [ 0.036569] io scheduler deadline registered [ 0.036752] io scheduler cfq registered (default) [ 0.038396] sunxi-pinctrl 1c20800.pinctrl: initialized sunXi PIO driver [ 0.080370] Serial: 8250/16550 driver, 8 ports, IRQ sharing disabled [ 0.082783] console [ttyS0] disabled [ 0.102988] 1c28000.serial: ttyS0 at MMIO 0x1c28000 (irq = 33, base_baud = 1500000) is a U6_16550A [ 0.617965] console [ttyS0] enabled [ 0.622695] mousedev: PS/2 mouse device common for all mice [ 0.628522] i2c /dev entries driver [ 0.633415] sunxi-wdt 1c20c90.watchdog: Watchdog enabled (timeout=16 sec, nowayout=0) [ 0.642417] TCP: cubic registered [ 0.645737] NET: Registered protocol family 17 [ 0.650301] Registering SWP/SWPB emulation handler [ 0.656013] ahci-5v: 5000 mV [ 0.659307] usb1-vbus: 5000 mV [ 0.662669] usb2-vbus: 5000 mV ~$off # PYBOOT: Exception: timeout
========================================================================
Board hummingboard-multi_v7_defconfig failure log: -------------------------------------------------
C1 U-Boot > tftp 0x10800000 next/next-20140403/multi_v7_defconfig/zImage tftp 0x10800000 next/next-20140403/multi_v7_defconfig/zImage Using FEC device TFTP from server 172.16.1.3; our IP address is 172.16.1.163 Filename 'next/next-20140403/multi_v7_defconfig/zImage'. Load address: 0x10800000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ######################################################### 1.9 MiB/s done Bytes transferred = 4642056 (46d508 hex) C1 U-Boot > setenv serverip 172.16.1.3 setenv serverip 172.16.1.3 C1 U-Boot > tftp 0x11000000 next/next-20140403/multi_v7_defconfig/dtbs/imx6dl-hummingboard.dtb tftp 0x11000000 next/next-20140403/multi_v7_defconfig/dtbs/imx6dl-hummingboard.dtb Using FEC device TFTP from server 172.16.1.3; our IP address is 172.16.1.163 Filename 'next/next-20140403/multi_v7_defconfig/dtbs/imx6dl-hummingboard.dtb'. Load address: 0x11000000 Loading: *## 667 KiB/s done Bytes transferred = 25988 (6584 hex) C1 U-Boot > printenv bootargs printenv bootargs bootargs=console=ttymxc0,115200 root=/dev/mmcblk0p2 rootwait debug earlyprintk C1 U-Boot > bootz 0x10800000 - 0x11000000 bootz 0x10800000 - 0x11000000 Kernel image @ 0x10800000 [ 0x000000 - 0x46d508 ] ## Flattened Device Tree blob at 11000000 Booting using the fdt blob at 0x11000000 Using Device Tree in place at 11000000, end 11009583
Starting kernel ...
~$off # PYBOOT: Exception: timeout
========================================================================
Board panda-multi_v7_defconfig failure log: -------------------------------------------------
[ 1.654052] usbcore: registered new interface driver usbhid [ 1.659912] usbhid: USB HID core driver [ 1.667907] TCP: cubic registered [ 1.671417] NET: Registered protocol family 17 [ 1.676239] Key type dns_resolver registered [ 1.681182] Power Management for TI OMAP4+ devices. [ 1.686340] Power Management for TI OMAP4. [ 1.690673] OMAP4 PM: u-boot >= v2012.07 is required for full PM support [ 1.698059] Registering SWP/SWPB emulation handler [ 1.703796] vwl1271: 1800 mV [ 1.708435] Skipping twl internal clock init and using bootloader value (unknown osc rate) [ 1.718139] twl 0-0048: PIH (irq 39) nested IRQs [ 1.723785] twl_rtc rtc.15: Power up reset detected. [ 1.729736] twl_rtc rtc.15: Enabling TWL-RTC [ 1.736694] twl_rtc rtc.15: rtc core: registered rtc.15 as rtc0 [ 1.743682] VAUX1_6030: 1000 <--> 3000 mV at 2800 mV [ 1.749755] VAUX2_6030: 1200 <--> 2800 mV at 1800 mV [ 1.755828] VAUX3_6030: 1000 <--> 3000 mV at 1200 mV [ 1.761901] VMMC: 1200 <--> 3000 mV at 3000 mV [ 1.767425] VPP: 1800 <--> 2500 mV at 1900 mV [ 1.772949] VUSIM: 1200 <--> 2900 mV at 1800 mV [ 1.778381] VDAC: 1800 mV [ 1.781219] VANA: 2100 mV [ 1.785247] VCXIO: 1800 mV [ 1.785247] VUSB: 3300 mV [ 1.792236] V1V8: 1800 mV [ 1.795806] V2V1: 2100 mV [ 1.879455] usb 1-1: new high-speed USB device number 2 using ehci-omap [ 1.999877] omap_i2c 48070000.i2c: bus 0 rev0.11 at 400 kHz [ 2.007354] omap_i2c 48072000.i2c: bus 1 rev0.11 at 400 kHz [ 2.016265] omap_i2c 48060000.i2c: bus 2 rev0.11 at 100 kHz [ 2.023681] omap_i2c 48350000.i2c: bus 3 rev0.11 at 400 kHz [ 2.031585] omap_hsmmc 4809c000.mmc: pins are not configured from the driver [ 2.047454] hub 1-1:1.0: USB hub found [ 2.051696] hub 1-1:1.0: 5 ports detected [ 2.424591] usb 1-1.1: new high-speed USB device number 3 using ehci-omap [ 2.578094] smsc95xx v1.0.4 [ 4.161346] smsc95xx 1-1.1:1.0 eth0: register 'smsc95xx' at usb-4a064c00.ehci-1.1, smsc95xx USB 2.0 Ethernet, 9a:27:46:84:c4:6d ~$off # PYBOOT: Exception: timeout
========================================================================
Board snowball-multi_v7_defconfig failure log: -------------------------------------------------
BOOTP broadcast 1 *** Unhandled DHCP Option in OFFER/ACK: 28 *** Unhandled DHCP Option in OFFER/ACK: 28 DHCP client bound to address 172.16.1.129 U8500 $ setenv serverip 172.16.1.3 setenv serverip 172.16.1.3 U8500 $ tftp 0x00100000 tmp/snowball-uP10Ql/tmpXgMSMB-uImage tftp 0x00100000 tmp/snowball-uP10Ql/tmpXgMSMB-uImage smc911x: detected LAN9221 controller smc911x: phy initialized smc911x: MAC 08:00:08:1e:0f:44 Using smc911x-0 device TFTP from server 172.16.1.3; our IP address is 172.16.1.129 Filename 'tmp/snowball-uP10Ql/tmpXgMSMB-uImage'. Load address: 0x100000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ############################################################ done Bytes transferred = 4683369 (477669 hex) U8500 $printenv bootargs printenv bootargs bootargs=console=ttyAMA2,115200 root=/dev/mmcblk0p4 rootwait rw debug earlyprintk U8500 $bootm 0x00100000 bootm 0x00100000 ## Booting kernel from Legacy Image at 00100000 ... Image Name: Linux Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 4683305 Bytes = 4.5 MB Load Address: 00008000 Entry Point: 00008000 Loading Kernel Image ... OK OK
Starting kernel ...
~$off # PYBOOT: Exception: timeout
========================================================================
Board wandboard-multi_v7_defconfig failure log: -------------------------------------------------
tftp 0x10800000 next/next-20140403/multi_v7_defconfig/zImage Using FEC device TFTP from server 172.16.1.3; our IP address is 172.16.1.162 Filename 'next/next-20140403/multi_v7_defconfig/zImage'. Load address: 0x10800000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ######################################################### 6.1 MiB/s done Bytes transferred = 4642056 (46d508 hex) => setenv serverip 172.16.1.3 setenv serverip 172.16.1.3 => tftp 0x11000000 next/next-20140403/multi_v7_defconfig/dtbs/imx6q-wandboard.dtb tftp 0x11000000 next/next-20140403/multi_v7_defconfig/dtbs/imx6q-wandboard.dtb Using FEC device TFTP from server 172.16.1.3; our IP address is 172.16.1.162 Filename 'next/next-20140403/multi_v7_defconfig/dtbs/imx6q-wandboard.dtb'. Load address: 0x11000000 Loading: *### 926.8 KiB/s done Bytes transferred = 29426 (72f2 hex) => printenv bootargs printenv bootargs bootargs=console=ttymxc0,115200 root=/dev/mmcblk0p2 rootwait debug => bootz 0x10800000 - 0x11000000 bootz 0x10800000 - 0x11000000 Kernel image @ 0x10800000 [ 0x000000 - 0x46d508 ] ## Flattened Device Tree blob at 11000000 Booting using the fdt blob at 0x11000000 Using Device Tree in place at 11000000, end 1100a2f1
Starting kernel ...
node: wandboard status: on ~$off # PYBOOT: Exception: timeout
kernel-build-reports@lists.linaro.org
-
Olof's autobooter