Full logs are available at http://arm-soc.lixom.net/bootlogs/mainline/v4.6-3647-g442c9ac/

Failed boards:

arndale multi_v7_nosmp_defconfig : NO BUILD bbb arm-omap2plus_defconfig : FAILED 1:53.73 bbb arm-multi_v7_defconfig : FAILED 2:00.18 bbb multi_v7_nosmp_defconfig : NO BUILD beagleboard-x15 arm-omap2plus_defconfig : FAILED 1:44.45 beagleboard-x15 arm-multi_v7_defconfig : FAILED 1:44.80 beagleboard-x15 arm-multi_lpae_defconfig : FAILED 1:51.63 beagleboard-x15 multi_v7_nosmp_defconfig : NO BUILD beaver multi_v7_nosmp_defconfig : NO BUILD capri multi_v7_nosmp_defconfig : NO BUILD chitra powerpc-pasemi_defconfig : BUILD FAILED colibri-vf61 multi_v7_nosmp_defconfig : NO BUILD colombus multi_v7_nosmp_defconfig : NO BUILD cosmic arm-imx_v6_v7_defconfig : FAILED 2:01.35 cosmic arm-multi_v7_defconfig : FAILED 2:12.77 cosmic multi_v7_nosmp_defconfig : NO BUILD cubie multi_v7_nosmp_defconfig : NO BUILD cubie2 multi_v7_nosmp_defconfig : NO BUILD cubox multi_v7_nosmp_defconfig : NO BUILD dalmore arm-tegra_defconfig : FAILED 1:48.27 dalmore arm-multi_v7_defconfig : FAILED 2:02.60 dalmore arm-multi_lpae_defconfig : FAILED 1:56.64 dalmore multi_v7_nosmp_defconfig : NO BUILD hummingboard multi_v7_nosmp_defconfig : NO BUILD jetsontk1 multi_v7_nosmp_defconfig : NO BUILD minnowmax minnowmax_defconfig : NO BUILD odroidu3 arm-exynos_defconfig : FAILED 1:51.60 omap5uevm arm-omap2plus_defconfig : FAILED 2:04.07 omap5uevm arm-multi_v7_defconfig : FAILED 2:07.32 omap5uevm arm-multi_lpae_defconfig : FAILED 2:17.17 omap5uevm multi_v7_nosmp_defconfig : NO BUILD pandaes multi_v7_nosmp_defconfig : NO BUILD parallella multi_v7_nosmp_defconfig : NO BUILD pi arm-multi_v7_defconfig : FAILED 2:09.52 pi arm-multi_lpae_defconfig : FAILED 1:52.57 pi multi_v7_nosmp_defconfig : NO BUILD pit multi_v7_nosmp_defconfig : NO BUILD rk3288evb multi_v7_nosmp_defconfig : NO BUILD seaboard multi_v7_nosmp_defconfig : NO BUILD snow multi_v7_nosmp_defconfig : NO BUILD snowball arm-u8500_defconfig : FAILED 1:55.58 snowball arm-multi_v7_defconfig : FAILED 2:05.50 snowball multi_v7_nosmp_defconfig : NO BUILD socfpga multi_v7_nosmp_defconfig : NO BUILD trimslice multi_v7_nosmp_defconfig : NO BUILD wandboard multi_v7_nosmp_defconfig : NO BUILD

Successful boards:

apc arm-vt8500_v6_v7_defconfig : passed 1:13.75 arndale arm-exynos_defconfig : passed 1:31.49 arndale arm-multi_v7_defconfig : passed 1:19.79 arndale arm-multi_lpae_defconfig : passed 1:26.36 capri arm-bcm_defconfig : passed 0:52.47 capri arm-multi_v7_defconfig : passed 0:53.87 chitra powerpc-ppc64_defconfig : passed 2:05.17 colombus arm-sunxi_defconfig : passed 2:30.09 colombus arm-multi_v7_defconfig : passed 2:40.56 colombus arm-multi_lpae_defconfig : passed 2:35.24 cubie arm-sunxi_defconfig : passed 0:50.36 cubie arm-multi_v7_defconfig : passed 0:48.87 cubie2 arm-sunxi_defconfig : passed 0:48.75 cubie2 arm-multi_v7_defconfig : passed 1:01.96 cubie2 arm-multi_lpae_defconfig : passed 0:55.82 cubox arm-multi_v7_defconfig : passed 1:14.75 cubox arm-mvebu_v7_defconfig : passed 1:09.81 hummingboard arm-imx_v6_v7_defconfig : passed 1:38.44 hummingboard arm-multi_v7_defconfig : passed 1:19.13 jetsontk1 arm-tegra_defconfig : passed 1:37.56 jetsontk1 arm-multi_v7_defconfig : passed 1:39.95 jetsontk1 arm-multi_lpae_defconfig : passed 1:38.72 pandaes arm-omap2plus_defconfig : warnings 1:39.10 pandaes arm-multi_v7_defconfig : passed 1:44.43 pi arm-exynos_defconfig : passed 2:13.02 pit arm-exynos_defconfig : passed 2:13.86 pit arm-multi_v7_defconfig : passed 2:14.86 pit arm-multi_lpae_defconfig : passed 2:23.04 seattle arm64-defconfig : warnings 2:28.88 snow arm-exynos_defconfig : passed 2:05.66 snow arm-multi_v7_defconfig : passed 2:05.53 snow arm-multi_lpae_defconfig : passed 1:58.33 trimslice arm-tegra_defconfig : passed 1:32.37 trimslice arm-multi_v7_defconfig : passed 1:43.64 wandboard arm-imx_v6_v7_defconfig : passed 1:15.03 wandboard arm-multi_v7_defconfig : passed 1:13.17

Offline boards:

beaver arm-tegra_defconfig : OFFLINE 2:14.04 beaver arm-multi_v7_defconfig : OFFLINE 2:26.10 colibri-vf61 arm-imx_v6_v7_defconfig : OFFLINE 2:13.83 colibri-vf61 arm-multi_v7_defconfig : OFFLINE 2:25.03 parallella arm-multi_v7_defconfig : OFFLINE 2:18.10 rk3288evb arm-multi_v7_defconfig : OFFLINE 0:49.17 rk3288evb arm-multi_lpae_defconfig : OFFLINE 0:43.75 sama5 arm-sama5_defconfig : OFFLINE 2:18.67 sama5d3-xplained arm-sama5_defconfig : OFFLINE 2:16.00 seaboard arm-tegra_defconfig : OFFLINE 2:19.62 seaboard arm-multi_v7_defconfig : OFFLINE 2:15.65 socfpga arm-socfpga_defconfig : OFFLINE 2:21.21 socfpga arm-multi_v7_defconfig : OFFLINE 2:16.50

Board legend is available at http://arm-soc.lixom.net/boards.html

Board bbb-arm-multi_v7_defconfig failure log: -------------------------------------------------

[ 1.558365] omap_hsmmc 48060000.mmc: Got CD GPIO [ 1.623669] Synopsys Designware Multimedia Card Interface Driver [ 1.631572] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.641868] ledtrig-cpu: registered to indicate activity on CPUs [ 1.648969] usbcore: registered new interface driver usbhid [ 1.654896] usbhid: USB HID core driver [ 1.666986] NET: Registered protocol family 10 [ 1.673565] sit: IPv6 over IPv4 tunneling driver [ 1.679718] NET: Registered protocol family 17 [ 1.684494] can: controller area network core (rev 20120528 abi 9) [ 1.691134] NET: Registered protocol family 29 [ 1.695854] can: raw protocol (rev 20120528) [ 1.700373] can: broadcast manager protocol (rev 20120528 t) [ 1.706376] can: netlink gateway (rev 20130117) max_hops=1 [ 1.713082] Key type dns_resolver registered [ 1.717991] omap_voltage_late_init: Voltage driver support not added [ 1.724983] ThumbEE CPU extension supported. [ 1.729549] Registering SWP/SWPB emulation handler [ 1.773663] tps65217 0-0024: TPS65217 ID 0xe version 1.2 [ 1.780199] at24 0-0050: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.787931] omap_i2c 44e0b000.i2c: bus 0 rev0.11 at 400 kHz [ 1.796633] at24 2-0054: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.804543] at24 2-0055: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.812433] at24 2-0056: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.820239] at24 2-0057: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.827599] omap_i2c 4819c000.i2c: bus 2 rev0.11 at 100 kHz [ 1.834704] hctosys: unable to open rtc device (rtc0) [ 1.848232] Waiting for root device /dev/mmcblk0p2... [ 1.854000] mmc1: new high speed MMC card at address 0001 [ 1.860768] mmcblk1: mmc1:0001 MMC02G 1.79 GiB [ 1.866047] mmcblk1boot0: mmc1:0001 MMC02G partition 1 1.00 MiB [ 1.872710] mmcblk1boot1: mmc1:0001 MMC02G partition 2 1.00 MiB [ 1.881313] mmcblk1: p1 p2

[PYBOOT] [bbb 01:57]: Timed out waiting for "<type 'str'>":

[PYBOOT] [bbb 01:58]: got exception: timeout ~$off

[PYBOOT] [bbb 01:59]: Done. Board bbb-arm-omap2plus_defconfig failure log: -------------------------------------------------

[ 2.063828] omap_hsmmc 481d8000.mmc: lookup for GPIO cd failed [ 2.069956] omap_hsmmc 481d8000.mmc: GPIO lookup for consumer wp [ 2.076291] omap_hsmmc 481d8000.mmc: using device tree for GPIO lookup [ 2.083176] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@481d8000[0]' [ 2.092786] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@481d8000[0]' [ 2.102299] omap_hsmmc 481d8000.mmc: using lookup tables for GPIO lookup [ 2.109326] omap_hsmmc 481d8000.mmc: lookup for GPIO wp failed [ 2.152553] ledtrig-cpu: registered to indicate activity on CPUs [ 2.161273] oprofile: using arm/armv7 [ 2.166407] Initializing XFRM netlink socket [ 2.171517] NET: Registered protocol family 10 [ 2.182321] sit: IPv6 over IPv4 tunneling driver [ 2.191146] NET: Registered protocol family 17 [ 2.196107] NET: Registered protocol family 15 [ 2.201368] Key type dns_resolver registered [ 2.206257] omap_voltage_late_init: Voltage driver support not added [ 2.213010] sr_dev_init: No voltage domain specified for smartreflex0. Cannot initialize [ 2.221489] sr_dev_init: No voltage domain specified for smartreflex1. Cannot initialize [ 2.231106] ThumbEE CPU extension supported. [ 2.235750] Registering SWP/SWPB emulation handler [ 2.240791] SmartReflex Class3 initialized [ 2.312925] mmc1: new high speed MMC card at address 0001 [ 2.324897] tps65217 0-0024: TPS65217 ID 0xe version 1.2 [ 2.332438] omap_i2c 44e0b000.i2c: bus 0 rev0.11 at 400 kHz [ 2.340409] mmcblk1: mmc1:0001 MMC02G 1.79 GiB [ 2.347732] mmcblk1boot0: mmc1:0001 MMC02G partition 1 1.00 MiB [ 2.359708] omap_i2c 4819c000.i2c: bus 2 rev0.11 at 100 kHz [ 2.367078] mmcblk1boot1: mmc1:0001 MMC02G partition 2 1.00 MiB [ 2.377879] hctosys: unable to open rtc device (rtc0) [ 2.383349] sr_init: No PMIC hook to init smartreflex [ 2.389031] sr_init: platform driver register failed for SR [ 2.432507] mmcblk1: p1 p2 [ 2.450389] Waiting for root device /dev/mmcblk0p2...

[PYBOOT] [bbb 01:51]: Timed out waiting for "<type 'str'>":

[PYBOOT] [bbb 01:52]: got exception: timeout ~$off

[PYBOOT] [bbb 01:53]: Done. Board beagleboard-x15-arm-multi_lpae_defconfig failure log: -------------------------------------------------

[ 1.726886] palmas-rtc 48070000.i2c:tps659038@58:tps659038_rtc: rtc core: registered 48070000.i2c:tps659 as rtc1 [ 1.741671] at24 0-0050: 4096 byte 24c32 EEPROM, writable, 1 bytes/write [ 1.748760] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 1.775707] rtc-ds1307 2-006f: SET TIME! [ 1.781473] rtc-ds1307 2-006f: rtc core: registered mcp7941x as rtc0 [ 1.788229] rtc-ds1307 2-006f: 64 bytes nvram [ 1.792844] omap_i2c 48060000.i2c: bus 2 rev0.12 at 400 kHz [ 1.800999] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller [ 1.806785] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1 [ 1.815028] xhci-hcd xhci-hcd.0.auto: hcc params 0x0220f04c hci version 0x100 quirks 0x00010010 [ 1.824201] xhci-hcd xhci-hcd.0.auto: irq 400, io mem 0x48890000 [ 1.831087] hub 1-0:1.0: USB hub found [ 1.835042] hub 1-0:1.0: 1 port detected [ 1.839436] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller [ 1.845205] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2 [ 1.853315] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. [ 1.862328] hub 2-0:1.0: USB hub found [ 1.866292] hub 2-0:1.0: 1 port detected [ 1.872350] omap_hsmmc 4809c000.mmc: Got CD GPIO [ 1.936755] rtc-ds1307 2-006f: setting system clock to 2001-01-01 00:00:00 UTC (978307200) [ 1.954571] aic_dvdd_fixed: disabling [ 1.960349] Waiting for root device /dev/mmcblk0p1... [ 2.007236] mmc1: new high speed MMC card at address 0001 [ 2.013301] mmcblk1: mmc1:0001 S10004 3.56 GiB [ 2.018218] mmcblk1boot0: mmc1:0001 S10004 partition 1 4.00 MiB [ 2.024591] mmcblk1boot1: mmc1:0001 S10004 partition 2 4.00 MiB [ 2.031501] mmcblk1: p1 [ 2.145190] usb 1-1: new high-speed USB device number 2 using xhci-hcd [ 2.180215] usb 2-1: new SuperSpeed USB device number 2 using xhci-hcd [ 2.205441] hub 2-1:1.0: USB hub found [ 2.209410] hub 2-1:1.0: 4 ports detected [ 2.301445] hub 1-1:1.0: USB hub found [ 2.305430] hub 1-1:1.0: 4 ports detected

[PYBOOT] [beagleboard-x15 01:48]: Timed out waiting for "<type 'str'>":

[PYBOOT] [beagleboard-x15 01:49]: got exception: timeout ~$off

[PYBOOT] [beagleboard-x15 01:51]: Done. Board beagleboard-x15-arm-multi_v7_defconfig failure log: -------------------------------------------------

[ 1.731260] palmas-rtc 48070000.i2c:tps659038@58:tps659038_rtc: rtc core: registered 48070000.i2c:tps659 as rtc1 [ 1.746005] at24 0-0050: 4096 byte 24c32 EEPROM, writable, 1 bytes/write [ 1.753080] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 1.775697] rtc-ds1307 2-006f: SET TIME! [ 1.781442] rtc-ds1307 2-006f: rtc core: registered mcp7941x as rtc0 [ 1.788187] rtc-ds1307 2-006f: 64 bytes nvram [ 1.792801] omap_i2c 48060000.i2c: bus 2 rev0.12 at 400 kHz [ 1.800995] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller [ 1.806789] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1 [ 1.815037] xhci-hcd xhci-hcd.0.auto: hcc params 0x0220f04c hci version 0x100 quirks 0x00010010 [ 1.824206] xhci-hcd xhci-hcd.0.auto: irq 400, io mem 0x48890000 [ 1.831098] hub 1-0:1.0: USB hub found [ 1.835059] hub 1-0:1.0: 1 port detected [ 1.839472] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller [ 1.845258] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2 [ 1.853359] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. [ 1.862391] hub 2-0:1.0: USB hub found [ 1.866365] hub 2-0:1.0: 1 port detected [ 1.872405] omap_hsmmc 4809c000.mmc: Got CD GPIO [ 1.936801] rtc-ds1307 2-006f: setting system clock to 2001-01-01 00:00:00 UTC (978307200) [ 1.954970] aic_dvdd_fixed: disabling [ 1.959694] Waiting for root device /dev/mmcblk0p1... [ 1.987269] mmc1: new high speed MMC card at address 0001 [ 1.993305] mmcblk1: mmc1:0001 S10004 3.56 GiB [ 1.998217] mmcblk1boot0: mmc1:0001 S10004 partition 1 4.00 MiB [ 2.004580] mmcblk1boot1: mmc1:0001 S10004 partition 2 4.00 MiB [ 2.011510] mmcblk1: p1 [ 2.145203] usb 1-1: new high-speed USB device number 2 using xhci-hcd [ 2.180232] usb 2-1: new SuperSpeed USB device number 2 using xhci-hcd [ 2.205499] hub 2-1:1.0: USB hub found [ 2.209469] hub 2-1:1.0: 4 ports detected [ 2.301503] hub 1-1:1.0: USB hub found [ 2.305492] hub 1-1:1.0: 4 ports detected

[PYBOOT] [beagleboard-x15 01:41]: Timed out waiting for "<type 'str'>":

[PYBOOT] [beagleboard-x15 01:42]: got exception: timeout ~$off

[PYBOOT] [beagleboard-x15 01:43]: Done. Board beagleboard-x15-arm-omap2plus_defconfig failure log: -------------------------------------------------

[ 2.228155] omap_hsmmc 4809c000.mmc: GPIO lookup for consumer cd [ 2.234478] omap_hsmmc 4809c000.mmc: using device tree for GPIO lookup [ 2.241347] of_get_named_gpiod_flags: parsed 'cd-gpios' property of node '/ocp/mmc@4809c000[0]' - status (0) [ 2.251738] omap_hsmmc 4809c000.mmc: Got CD GPIO [ 2.256599] omap_hsmmc 4809c000.mmc: GPIO lookup for consumer wp [ 2.262898] omap_hsmmc 4809c000.mmc: using device tree for GPIO lookup [ 2.269759] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@4809c000[0]' [ 2.279358] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@4809c000[0]' [ 2.288856] omap_hsmmc 4809c000.mmc: using lookup tables for GPIO lookup [ 2.295927] omap_hsmmc 4809c000.mmc: lookup for GPIO wp failed [ 2.345068] omap_hsmmc 480b4000.mmc: GPIO lookup for consumer cd [ 2.351370] omap_hsmmc 480b4000.mmc: using device tree for GPIO lookup [ 2.358239] of_get_named_gpiod_flags: can't parse 'cd-gpios' property of node '/ocp/mmc@480b4000[0]' [ 2.367829] of_get_named_gpiod_flags: can't parse 'cd-gpio' property of node '/ocp/mmc@480b4000[0]' [ 2.377329] omap_hsmmc 480b4000.mmc: using lookup tables for GPIO lookup [ 2.384371] omap_hsmmc 480b4000.mmc: lookup for GPIO cd failed [ 2.390490] omap_hsmmc 480b4000.mmc: GPIO lookup for consumer wp [ 2.396796] omap_hsmmc 480b4000.mmc: using device tree for GPIO lookup [ 2.403638] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@480b4000[0]' [ 2.413224] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@480b4000[0]' [ 2.422722] omap_hsmmc 480b4000.mmc: using lookup tables for GPIO lookup [ 2.429767] omap_hsmmc 480b4000.mmc: lookup for GPIO wp failed [ 2.475222] hctosys: unable to open rtc device (rtc0) [ 2.480525] sr_init: No PMIC hook to init smartreflex [ 2.486037] sr_init: platform driver register failed for SR [ 2.526786] mmc1: new high speed MMC card at address 0001 [ 2.532954] aic_dvdd_fixed: disabling [ 2.534928] mmcblk1: mmc1:0001 S10004 3.56 GiB [ 2.535713] mmcblk1boot0: mmc1:0001 S10004 partition 1 4.00 MiB [ 2.536370] mmcblk1boot1: mmc1:0001 S10004 partition 2 4.00 MiB [ 2.554450] ldousb: disabling [ 2.555731] mmcblk1: p1 [ 2.564826] Waiting for root device /dev/mmcblk0p1...

[PYBOOT] [beagleboard-x15 01:41]: Timed out waiting for "<type 'str'>":

[PYBOOT] [beagleboard-x15 01:42]: got exception: timeout ~$off

[PYBOOT] [beagleboard-x15 01:43]: Done. Board cosmic-arm-imx_v6_v7_defconfig failure log: -------------------------------------------------

[ 14.459107] blk_update_request: I/O error, dev mmcblk0, sector 3633185 [ 18.533338] mmcblk0: error -110 transferring data, sector 3633186, nr 230, cmd response 0x900, card status 0x0 [ 18.543658] blk_update_request: I/O error, dev mmcblk0, sector 3633186 [ 22.617894] mmcblk0: error -110 transferring data, sector 3633187, nr 229, cmd response 0x900, card status 0x0 [ 22.628218] blk_update_request: I/O error, dev mmcblk0, sector 3633187 [ 26.702458] mmcblk0: error -110 transferring data, sector 3633188, nr 228, cmd response 0x900, card status 0x0 [ 26.712785] blk_update_request: I/O error, dev mmcblk0, sector 3633188 [ 30.787008] mmcblk0: error -110 transferring data, sector 3633189, nr 227, cmd response 0x900, card status 0x0 [ 30.797337] blk_update_request: I/O error, dev mmcblk0, sector 3633189 [ 34.871517] mmcblk0: error -110 transferring data, sector 3633190, nr 226, cmd response 0x900, card status 0x0 [ 34.881848] blk_update_request: I/O error, dev mmcblk0, sector 3633190 [ 38.956068] mmcblk0: error -110 transferring data, sector 3633191, nr 225, cmd response 0x900, card status 0x0 [ 38.966393] blk_update_request: I/O error, dev mmcblk0, sector 3633191 [ 43.040585] mmcblk0: error -110 transferring data, sector 3633192, nr 224, cmd response 0x900, card status 0x0 [ 43.050946] blk_update_request: I/O error, dev mmcblk0, sector 3633192 [ 47.125179] mmcblk0: error -110 transferring data, sector 3633193, nr 223, cmd response 0x900, card status 0x0 [ 47.135501] blk_update_request: I/O error, dev mmcblk0, sector 3633193 [ 51.209663] mmcblk0: error -110 transferring data, sector 3633194, nr 222, cmd response 0x900, card status 0x0 [ 51.219986] blk_update_request: I/O error, dev mmcblk0, sector 3633194 [ 55.294217] mmcblk0: error -110 transferring data, sector 3633195, nr 221, cmd response 0x900, card status 0x0 [ 55.304609] blk_update_request: I/O error, dev mmcblk0, sector 3633195 [ 59.378780] mmcblk0: error -110 transferring data, sector 3633196, nr 220, cmd response 0x900, card status 0x0 [ 59.389102] blk_update_request: I/O error, dev mmcblk0, sector 3633196 [ 63.463330] mmcblk0: error -110 transferring data, sector 3633197, nr 219, cmd response 0x900, card status 0x0 [ 63.473656] blk_update_request: I/O error, dev mmcblk0, sector 3633197 [ 67.547884] mmcblk0: error -110 transferring data, sector 3633198, nr 218, cmd response 0x900, card status 0x0 [ 67.558209] blk_update_request: I/O error, dev mmcblk0, sector 3633198 [ 71.632437] mmcblk0: error -110 transferring data, sector 3633199, nr 217, cmd response 0x900, card status 0x0 [ 71.642763] blk_update_request: I/O error, dev mmcblk0, sector 3633199 [ 75.716993] mmcblk0: error -110 transferring data, sector 3633200, nr 216, cmd response 0x900, card status 0x0 [ 75.727317] blk_update_request: I/O error, dev mmcblk0, sector 3633200 [ 79.801483] mmcblk0: error -110 transferring data, sector 3633201, nr 215, cmd response 0x900, card status 0x0 [ 79.811810] blk_update_request: I/O error, dev mmcblk0, sector 3633201

[PYBOOT] [cosmic 01:58]: Timed out waiting for "<type 'str'>":

[PYBOOT] [cosmic 01:59]: got exception: timeout ~$off

[PYBOOT] [cosmic 02:00]: Done. Board cosmic-arm-multi_v7_defconfig failure log: -------------------------------------------------

[ 14.086638] blk_update_request: I/O error, dev mmcblk0, sector 3633185 [ 18.160621] mmcblk0: error -110 transferring data, sector 3633186, nr 230, cmd response 0x900, card status 0x0 [ 18.170697] blk_update_request: I/O error, dev mmcblk0, sector 3633186 [ 22.244678] mmcblk0: error -110 transferring data, sector 3633187, nr 229, cmd response 0x900, card status 0x0 [ 22.254758] blk_update_request: I/O error, dev mmcblk0, sector 3633187 [ 26.328735] mmcblk0: error -110 transferring data, sector 3633188, nr 228, cmd response 0x900, card status 0x0 [ 26.338809] blk_update_request: I/O error, dev mmcblk0, sector 3633188 [ 30.412793] mmcblk0: error -110 transferring data, sector 3633189, nr 227, cmd response 0x900, card status 0x0 [ 30.422884] blk_update_request: I/O error, dev mmcblk0, sector 3633189 [ 34.496868] mmcblk0: error -110 transferring data, sector 3633190, nr 226, cmd response 0x900, card status 0x0 [ 34.506947] blk_update_request: I/O error, dev mmcblk0, sector 3633190 [ 38.580962] mmcblk0: error -110 transferring data, sector 3633191, nr 225, cmd response 0x900, card status 0x0 [ 38.591026] blk_update_request: I/O error, dev mmcblk0, sector 3633191 [ 42.665011] mmcblk0: error -110 transferring data, sector 3633192, nr 224, cmd response 0x900, card status 0x0 [ 42.675079] blk_update_request: I/O error, dev mmcblk0, sector 3633192 [ 46.749066] mmcblk0: error -110 transferring data, sector 3633193, nr 223, cmd response 0x900, card status 0x0 [ 46.759138] blk_update_request: I/O error, dev mmcblk0, sector 3633193 [ 50.833124] mmcblk0: error -110 transferring data, sector 3633194, nr 222, cmd response 0x900, card status 0x0 [ 50.843200] blk_update_request: I/O error, dev mmcblk0, sector 3633194 [ 54.917182] mmcblk0: error -110 transferring data, sector 3633195, nr 221, cmd response 0x900, card status 0x0 [ 54.927258] blk_update_request: I/O error, dev mmcblk0, sector 3633195 [ 59.001238] mmcblk0: error -110 transferring data, sector 3633196, nr 220, cmd response 0x900, card status 0x0 [ 59.011312] blk_update_request: I/O error, dev mmcblk0, sector 3633196 [ 63.085289] mmcblk0: error -110 transferring data, sector 3633197, nr 219, cmd response 0x900, card status 0x0 [ 63.095361] blk_update_request: I/O error, dev mmcblk0, sector 3633197 [ 67.169338] mmcblk0: error -110 transferring data, sector 3633198, nr 218, cmd response 0x900, card status 0x0 [ 67.179412] blk_update_request: I/O error, dev mmcblk0, sector 3633198 [ 71.253390] mmcblk0: error -110 transferring data, sector 3633199, nr 217, cmd response 0x900, card status 0x0 [ 71.263464] blk_update_request: I/O error, dev mmcblk0, sector 3633199 [ 75.337455] mmcblk0: error -110 transferring data, sector 3633200, nr 216, cmd response 0x900, card status 0x0 [ 75.347533] blk_update_request: I/O error, dev mmcblk0, sector 3633200 [ 79.421515] mmcblk0: error -110 transferring data, sector 3633201, nr 215, cmd response 0x900, card status 0x0 [ 79.431592] blk_update_request: I/O error, dev mmcblk0, sector 3633201

[PYBOOT] [cosmic 02:09]: Timed out waiting for "<type 'str'>":

[PYBOOT] [cosmic 02:10]: got exception: timeout ~$off

[PYBOOT] [cosmic 02:12]: Done. Board dalmore-arm-multi_lpae_defconfig failure log: -------------------------------------------------

[ 2.633495] can: netlink gateway (rev 20130117) max_hops=1 [ 2.640509] Key type dns_resolver registered [ 2.646977] ThumbEE CPU extension supported. [ 2.651404] Registering SWP/SWPB emulation handler [ 2.665447] usb1_vbus: supplied by vdd-sys-5v0 [ 2.675336] usb2_vbus: supplied by vdd-sys-5v0 [ 2.692791] VDD_5V0_HDMI_CON: supplied by vdd-sys-5v0 [ 2.714440] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 2.721208] [drm] No driver support for vblank timestamp query. [ 2.738172] mmc1: new high speed MMC card at address 0001 [ 2.746494] mmcblk1: mmc1:0001 SEM32G 29.1 GiB [ 2.752180] mmcblk1boot0: mmc1:0001 SEM32G partition 1 4.00 MiB [ 2.760743] mmcblk1boot1: mmc1:0001 SEM32G partition 2 4.00 MiB [ 2.768867] mmcblk1rpmb: mmc1:0001 SEM32G partition 3 4.00 MiB [ 2.778434] mmcblk1: p1 [ 2.898428] Console: switching to colour frame buffer device 240x75 [ 2.985048] drm drm: fb0: frame buffer device [ 3.007833] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 3.022816] tegra-ehci 7d008000.usb: EHCI Host Controller [ 3.028405] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 1 [ 3.037132] tegra-ehci 7d008000.usb: irq 339, io mem 0x7d008000 [ 3.052866] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.10 [ 3.063235] hub 1-0:1.0: USB hub found [ 3.067229] hub 1-0:1.0: 1 port detected [ 3.077807] input: gpio-keys as /devices/soc0/gpio-keys/input/input0 [ 3.092293] palmas-rtc 7000d000.i2c:tps65913@58:rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800) [ 3.154931] dvdd_ts: disabling [ 3.158190] usb1_vbus: disabling [ 3.161453] vdd_cam_1v8_reg: disabling [ 3.169080] Waiting for root device /dev/mmcblk0p1... [ 3.383171] usb 1-1: new high-speed USB device number 2 using tegra-ehci [ 4.366547] asix 1-1:1.0 eth0: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 48:f8:b3:2b:29:1f [ 64.747236] random: nonblocking pool is initialized

[PYBOOT] [dalmore 01:53]: Timed out waiting for "<type 'str'>":

[PYBOOT] [dalmore 01:54]: got exception: timeout ~$off

[PYBOOT] [dalmore 01:56]: Done. Board dalmore-arm-multi_v7_defconfig failure log: -------------------------------------------------

[ 2.631622] can: netlink gateway (rev 20130117) max_hops=1 [ 2.638683] Key type dns_resolver registered [ 2.645136] ThumbEE CPU extension supported. [ 2.649568] Registering SWP/SWPB emulation handler [ 2.666760] usb1_vbus: supplied by vdd-sys-5v0 [ 2.688121] usb2_vbus: supplied by vdd-sys-5v0 [ 2.705788] VDD_5V0_HDMI_CON: supplied by vdd-sys-5v0 [ 2.727236] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 2.734104] [drm] No driver support for vblank timestamp query. [ 2.764996] mmc1: new high speed MMC card at address 0001 [ 2.772621] mmcblk1: mmc1:0001 SEM32G 29.1 GiB [ 2.778322] mmcblk1boot0: mmc1:0001 SEM32G partition 1 4.00 MiB [ 2.785297] mmcblk1boot1: mmc1:0001 SEM32G partition 2 4.00 MiB [ 2.793731] mmcblk1rpmb: mmc1:0001 SEM32G partition 3 4.00 MiB [ 2.804173] mmcblk1: p1 [ 2.912991] Console: switching to colour frame buffer device 240x75 [ 2.999311] drm drm: fb0: frame buffer device [ 3.022801] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 3.037759] tegra-ehci 7d008000.usb: EHCI Host Controller [ 3.043353] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 1 [ 3.052247] tegra-ehci 7d008000.usb: irq 339, io mem 0x7d008000 [ 3.067837] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.10 [ 3.078302] hub 1-0:1.0: USB hub found [ 3.082402] hub 1-0:1.0: 1 port detected [ 3.093575] input: gpio-keys as /devices/soc0/gpio-keys/input/input0 [ 3.108423] palmas-rtc 7000d000.i2c:tps65913@58:rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800) [ 3.170976] dvdd_ts: disabling [ 3.174194] usb1_vbus: disabling [ 3.177497] vdd_cam_1v8_reg: disabling [ 3.185225] Waiting for root device /dev/mmcblk0p1... [ 3.392839] usb 1-1: new high-speed USB device number 2 using tegra-ehci [ 4.347896] asix 1-1:1.0 eth0: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 48:f8:b3:2b:29:1f [ 58.749103] random: nonblocking pool is initialized

[PYBOOT] [dalmore 01:59]: Timed out waiting for "<type 'str'>":

[PYBOOT] [dalmore 02:00]: got exception: timeout ~$off

[PYBOOT] [dalmore 02:01]: Done. Board dalmore-arm-tegra_defconfig failure log: -------------------------------------------------

[ 2.916498] Bluetooth: RFCOMM socket layer initialized [ 2.921715] Bluetooth: RFCOMM ver 1.11 [ 2.925655] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 2.931049] Bluetooth: BNEP socket layer initialized [ 2.936521] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 2.942623] Bluetooth: HIDP socket layer initialized [ 2.949029] Key type dns_resolver registered [ 2.958546] Registering SWP/SWPB emulation handler [ 2.977000] usb1_vbus: supplied by vdd-sys-5v0 [ 2.986328] usb2_vbus: supplied by vdd-sys-5v0 [ 3.000088] VDD_5V0_HDMI_CON: supplied by vdd-sys-5v0 [ 3.027869] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 3.034519] [drm] No driver support for vblank timestamp query. [ 3.212557] Console: switching to colour frame buffer device 240x75 [ 3.300048] drm drm: fb0: frame buffer device [ 3.335049] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 3.344305] tegra-ehci 7d008000.usb: EHCI Host Controller [ 3.350130] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 1 [ 3.360575] tegra-ehci 7d008000.usb: irq 339, io mem 0x7d008000 [ 3.385056] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.10 [ 3.399723] hub 1-0:1.0: USB hub found [ 3.403697] hub 1-0:1.0: 1 port detected [ 3.417354] input: gpio-keys as /devices/soc0/gpio-keys/input/input1 [ 3.432738] palmas-rtc 7000d000.i2c:tps65913@58:rtc: setting system clock to 2000-01-01 00:00:01 UTC (946684801) [ 3.522703] dvdd_ts: disabling [ 3.525934] usb1_vbus: disabling [ 3.529201] vdd_cam_1v8_reg: disabling [ 3.533886] ALSA device list: [ 3.537004] #0: NVIDIA Tegra Dalmore [ 3.542878] Waiting for root device /dev/mmcblk0p1... [ 3.725061] usb 1-1: new high-speed USB device number 2 using tegra-ehci [ 4.759326] asix 1-1:1.0 eth0: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 48:f8:b3:2b:29:1f [ 61.329058] random: nonblocking pool is initialized

[PYBOOT] [dalmore 01:45]: Timed out waiting for "<type 'str'>":

[PYBOOT] [dalmore 01:46]: got exception: timeout ~$off

[PYBOOT] [dalmore 01:47]: Done. Board odroidu3-arm-exynos_defconfig failure log: -------------------------------------------------

[ 1.864097] usbcore: registered new interface driver usbhid [ 1.868315] usbhid: USB HID core driver [ 1.879100] NET: Registered protocol family 10 [ 1.879670] sit: IPv6 over IPv4 tunneling driver [ 1.882987] NET: Registered protocol family 17 [ 1.886934] NET: Registered protocol family 15 [ 1.891422] Key type dns_resolver registered [ 1.895744] Registering SWP/SWPB emulation handler [ 1.901564] s3c-rtc 10070000.rtc: rtc disabled, re-enabling [ 1.906151] s3c-rtc 10070000.rtc: rtc core: registered s3c as rtc1 [ 1.925536] mmc_host mmc1: Bus speed (slot 0) = 44000000Hz (slot req 52000000Hz, actual 44000000HZ div = 0) [ 1.929812] mmc_host mmc1: Bus speed (slot 0) = 73333333Hz (slot req 52000000Hz, actual 36666666HZ div = 1) [ 1.939639] mmc1: new DDR MMC card at address 0001 [ 1.944274] max98090 1-0010: MAX98090 REVID=0x43 [ 1.948971] mmcblk1: mmc1:0001 008G92 7.28 GiB [ 1.953400] mmcblk1boot0: mmc1:0001 008G92 partition 1 4.00 MiB [ 1.959347] mmcblk1boot1: mmc1:0001 008G92 partition 2 4.00 MiB [ 1.965392] usb 1-3: New USB device found, idVendor=0424, idProduct=3503 [ 1.971723] usb 1-3: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.979360] mmcblk1rpmb: mmc1:0001 008G92 partition 3 512 KiB [ 1.984991] max98090 1-0010: use default 2.8v micbias [ 1.990084] hub 1-3:1.0: USB hub found [ 1.993378] hub 1-3:1.0: 3 ports detected [ 1.998080] mmcblk1: p1 p2 [ 2.005613] asoc-simple-card sound: HiFi <-> 3830000.i2s mapping ok [ 2.009203] input: gpio_keys as /devices/platform/gpio_keys/input/input0 [ 2.031214] max77686-rtc max77686-rtc: setting system clock to 2000-01-01 01:00:19 UTC (946688419) [ 2.049083] VDD10_HDMI_1.0V: disabling [ 2.049781] vdd_g3d: disabling [ 2.050848] BUCK8_2.8V: disabling [ 2.05h849] ALSA device list: [ 2.056469] #0: Odroid-U3 [ 2.060187] Waiting for root device /dev/mmcblk0p2...

[PYBOOT] [odroidu3 01:48]: Timed out waiting for "<type 'str'>":

[PYBOOT] [odroidu3 01:49]: got exception: timeout ~$off

[PYBOOT] [odroidu3 01:51]: Done. Board omap5uevm-arm-multi_lpae_defconfig failure log: -------------------------------------------------

[ 1.969826] ldo1: Bringing 0uV into 1800000-1800000uV [ 1.976351] ldo2: Bringing 0uV into 2800000-2800000uV [ 1.984395] ldo4: Bringing 0uV into 1800000-1800000uV [ 1.995521] ldo7: Bringing 0uV into 2000000-2000000uV [ 2.003659] smsc95xx v1.0.4 [ 2.007127] ldo9: bypassed regulator has no supply! [ 2.012277] ldo9: failed to get the current voltage(-517) [ 2.017959] palmas-pmic 48070000.i2c:palmas@48:palmas_pmic: failed to register 48070000.i2c:palmas@48:palmas_pmic regulator [ 2.033395] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 2.060067] omap_i2c 4807c000.i2c: bus 4 rev0.12 at 400 kHz [ 2.066524] omap-dwc3 4a020000.omap_dwc3: vbus init failed [ 2.093693] smsc95xx 1-3:1.0 eth0: register 'smsc95xx' at usb-4a064c00.ehci-3, smsc95xx USB 2.0 Ethernet, 4e:49:84:17:6d:b0 [ 2.105479] smps9: Bringing 0uV into 2100000-2100000uV [ 2.124441] ldo9: bypassed regulator has no supply! [ 2.129561] ldo9: failed to get the current voltage(-517) [ 2.135225] palmas-pmic 48070000.i2c:palmas@48:palmas_pmic: failed to register 48070000.i2c:palmas@48:palmas_pmic regulator [ 2.149240] omap-dwc3 4a020000.omap_dwc3: vbus init failed [ 2.182993] smps9: Bringing 0uV into 2100000-2100000uV [ 2.201759] ldo9: bypassed regulator has no supply! [ 2.206875] ldo9: failed to get the current voltage(-517) [ 2.212545] palmas-pmic 48070000.i2c:palmas@48:palmas_pmic: failed to register 48070000.i2c:palmas@48:palmas_pmic regulator [ 2.226973] palmas-rtc 48070000.i2c:palmas@48:rtc: setting system clock to 2000-01-01 00:02:30 UTC (946684950) [ 2.242697] pbias_mmc_omap5: disabling [ 2.246651] vmmcsdio_fixed: disabling [ 2.251217] Waiting for root device /dev/mmcblk1p2... [ 2.334282] usb 1-2: new high-speed USB device number 3 using ehci-omap [ 2.470109] hub 1-2:1.0: USB hub found [ 2.474123] hub 1-2:1.0: 3 ports detected [ 2.479838] omap-dwc3 4a020000.omap_dwc3: vbus init failed [ 2.507975] smps9: Bringing 0uV into 2100000-2100000uV [ 2.526884] ldo9: bypassed regulator has no supply! [ 2.532008] ldo9: failed to get the current voltage(-517) [ 2.537679] palmas-pmic 48070000.i2c:palmas@48:palmas_pmic: failed to register 48070000.i2c:palmas@48:palmas_pmic regulator

[PYBOOT] [omap5uevm 02:14]: Timed out waiting for "<type 'str'>":

[PYBOOT] [omap5uevm 02:15]: got exception: timeout ~$off

[PYBOOT] [omap5uevm 02:16]: Done. Board omap5uevm-arm-multi_v7_defconfig failure log: -------------------------------------------------

[ 1.974821] ldo1: Bringing 0uV into 1800000-1800000uV [ 1.981349] ldo2: Bringing 0uV into 2800000-2800000uV [ 1.989405] ldo4: Bringing 0uV into 1800000-1800000uV [ 2.000556] ldo7: Bringing 0uV into 2000000-2000000uV [ 2.008639] smsc95xx v1.0.4 [ 2.012124] ldo9: bypassed regulator has no supply! [ 2.017264] ldo9: failed to get the current voltage(-517) [ 2.022941] palmas-pmic 48070000.i2c:palmas@48:palmas_pmic: failed to register 48070000.i2c:palmas@48:palmas_pmic regulator [ 2.038405] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 2.065041] omap_i2c 4807c000.i2c: bus 4 rev0.12 at 400 kHz [ 2.071417] omap-dwc3 4a020000.omap_dwc3: vbus init failed [ 2.098021] smps9: Bringing 0uV into 2100000-2100000uV [ 2.104170] smsc95xx 1-3:1.0 eth0: register 'smsc95xx' at usb-4a064c00.ehci-3, smsc95xx USB 2.0 Ethernet, de:21:f2:b8:2c:45 [ 2.128964] ldo9: bypassed regulator has no supply! [ 2.134082] ldo9: failed to get the current voltage(-517) [ 2.139752] palmas-pmic 48070000.i2c:palmas@48:palmas_pmic: failed to register 48070000.i2c:palmas@48:palmas_pmic regulator [ 2.153791] omap-dwc3 4a020000.omap_dwc3: vbus init failed [ 2.182940] smps9: Bringing 0uV into 2100000-2100000uV [ 2.201633] ldo9: bypassed regulator has no supply! [ 2.206747] ldo9: failed to get the current voltage(-517) [ 2.212418] palmas-pmic 48070000.i2c:palmas@48:palmas_pmic: failed to register 48070000.i2c:palmas@48:palmas_pmic regulator [ 2.226947] palmas-rtc 48070000.i2c:palmas@48:rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800) [ 2.242666] pbias_mmc_omap5: disabling [ 2.246611] vmmcsdio_fixed: disabling [ 2.251166] Waiting for root device /dev/mmcblk1p2... [ 2.364243] usb 1-2: new high-speed USB device number 3 using ehci-omap [ 2.500079] hub 1-2:1.0: USB hub found [ 2.504097] hub 1-2:1.0: 3 ports detected [ 2.510016] omap-dwc3 4a020000.omap_dwc3: vbus init failed [ 2.537957] smps9: Bringing 0uV into 2100000-2100000uV [ 2.556686] ldo9: bypassed regulator has no supply! [ 2.561801] ldo9: failed to get the current voltage(-517) [ 2.567476] palmas-pmic 48070000.i2c:palmas@48:palmas_pmic: failed to register 48070000.i2c:palmas@48:palmas_pmic regulator

[PYBOOT] [omap5uevm 02:03]: Timed out waiting for "<type 'str'>":

[PYBOOT] [omap5uevm 02:04]: got exception: timeout ~$off

[PYBOOT] [omap5uevm 02:05]: Done. Board omap5uevm-arm-omap2plus_defconfig failure log: -------------------------------------------------

[ 2.374950] omap_hsmmc 4809c000.mmc: using device tree for GPIO lookup [ 2.374957] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@4809c000[0]' [ 2.374962] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@4809c000[0]' [ 2.374966] omap_hsmmc 4809c000.mmc: using lookup tables for GPIO lookup [ 2.374973] omap_hsmmc 4809c000.mmc: lookup for GPIO wp failed [ 2.494629] omap_hsmmc 480ad000.mmc: GPIO lookup for consumer wp [ 2.500921] omap_hsmmc 480ad000.mmc: using device tree for GPIO lookup [ 2.507784] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@480ad000[0]' [ 2.517365] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@480ad000[0]' [ 2.526859] omap_hsmmc 480ad000.mmc: using lookup tables for GPIO lookup [ 2.533891] omap_hsmmc 480ad000.mmc: lookup for GPIO wp failed [ 2.554426] smps9: Bringing 0uV into 2100000-2100000uV [ 2.582931] ldo9: bypassed regulator has no supply! [ 2.588053] ldo9: failed to get the current voltage(-517) [ 2.593732] palmas-pmic 48070000.i2c:palmas@48:palmas_pmic: failed to register 48070000.i2c:palmas@48:palmas_pmic regulator [ 2.613541] omap_hsmmc 4809c000.mmc: GPIO lookup for consumer cd [ 2.619836] omap_hsmmc 4809c000.mmc: using device tree for GPIO lookup [ 2.626700] of_get_named_gpiod_flags: can't parse 'cd-gpios' property of node '/ocp/mmc@4809c000[0]' [ 2.636289] of_get_named_gpiod_flags: can't parse 'cd-gpio' property of node '/ocp/mmc@4809c000[0]' [ 2.645782] omap_hsmmc 4809c000.mmc: using lookup tables for GPIO lookup [ 2.652808] omap_hsmmc 4809c000.mmc: lookup for GPIO cd failed [ 2.658938] omap_hsmmc 4809c000.mmc: GPIO lookup for consumer wp [ 2.665244] omap_hsmmc 4809c000.mmc: using device tree for GPIO lookup [ 2.672094] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@4809c000[0]' [ 2.681684] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@4809c000[0]' [ 2.691169] omap_hsmmc 4809c000.mmc: using lookup tables for GPIO lookup [ 2.698207] omap_hsmmc 4809c000.mmc: lookup for GPIO wp failed [ 2.744619] hctosys: unable to open rtc device (rtc0) [ 2.749915] sr_init: No PMIC hook to init smartreflex [ 2.755424] sr_init: platform driver register failed for SR [ 2.783726] pbias_mmc_omap5: disabling [ 2.787661] vmmcsdio_fixed: disabling [ 2.793859] Waiting for root device /dev/mmcblk1p2...

[PYBOOT] [omap5uevm 02:01]: Timed out waiting for "<type 'str'>":

[PYBOOT] [omap5uevm 02:02]: got exception: timeout ~$off

[PYBOOT] [omap5uevm 02:03]: Done. Board pi-arm-multi_lpae_defconfig failure log: -------------------------------------------------

[ 1.522511] isl29018 7-0044: No cache defaults, reading back from HW [ 1.528865] isl29018 7-0044: Failed to read 1: -6 [ 1.533445] isl29018 7-0044: regmap initialization fails: -6 [ 1.543669] NET: Registered protocol family 10 [ 1.548115] sit: IPv6 over IPv4 tunneling driver [ 1.551699] NET: Registered protocol family 17 [ 1.555703] can: controller area network core (rev 20120528 abi 9) [ 1.561891] NET: Registered protocol family 29 [ 1.566281] can: raw protocol (rev 20120528) [ 1.570531] can: broadcast manager protocol (rev 20120528 t) [ 1.576173] can: netlink gateway (rev 20130117) max_hops=1 [ 1.581899] Key type dns_resolver registered [ 1.586223] ThumbEE CPU extension supported. [ 1.590121] Registering SWP/SWPB emulation handler [ 1.599959] dwmmc_exynos 12210000.mmc: IDMAC supports 32-bit address mode. [ 1.605451] dwmmc_exynos 12210000.mmc: Using internal DMA controller. [ 1.611806] dwmmc_exynos 12210000.mmc: Version ID is 250a [ 1.617182] dwmmc_exynos 12210000.mmc: DW MMC controller at irq 70,64 bit host data width,64 deep fifo [ 1.627259] input: gpio-keys as /devices/platform/gpio-keys/input/input1 [ 1.637454] dwmmc_exynos 12210000.mmc: IDMAC supports 32-bit address mode. [ 1.642899] mmc_host mmc0: Bus speed (slot 0) = 200000000Hz (slot req 200000000Hz, actual 200000000HZ div = 0) [ 1.653082] dwmmc_exynos 12210000.mmc: Using internal DMA controller. [ 1.659266] dwmmc_exynos 12210000.mmc: Version ID is 250a [ 1.664644] dwmmc_exynos 12210000.mmc: DW MMC controller at irq 70,64 bit host data width,64 deep fifo [ 1.674363] max77686-rtc max77802-rtc: hctosys: unable to read the hardware clock [ 1.696618] Waiting for root device /dev/mmcblk0p1... [ 1.700489] mmc0: tuning execution failed: -5 [ 1.704528] mmc0: error -5 whilst initialising MMC card [ 2.572318] asix 1-1:1.0 eth0: register 'asix' at usb-xhci-hcd.2.auto-1, ASIX AX88772 USB 2.0 Ethernet, c8:b3:73:46:fb:95 [ 2.586307] dwmmc_exynos 12210000.mmc: IDMAC supports 32-bit address mode. [ 2.591770] dwmmc_exynos 12210000.mmc: Using internal DMA controller. [ 2.598143] dwmmc_exynos 12210000.mmc: Version ID is 250a [ 2.603528] dwmmc_exynos 12210000.mmc: DW MMC controller at irq 70,64 bit host data width,64 deep fifo

[PYBOOT] [pi 01:49]: Timed out waiting for "<type 'str'>":

[PYBOOT] [pi 01:50]: got exception: timeout ~$off

[PYBOOT] [pi 01:51]: Done. Board pi-arm-multi_v7_defconfig failure log: -------------------------------------------------

[ 1.528045] isl29018 7-0044: No cache defaults, reading back from HW [ 1.534393] isl29018 7-0044: Failed to read 1: -6 [ 1.538978] isl29018 7-0044: regmap initialization fails: -6 [ 1.549234] NET: Registered protocol family 10 [ 1.553686] sit: IPv6 over IPv4 tunneling driver [ 1.557271] NET: Registered protocol family 17 [ 1.561271] can: controller area network core (rev 20120528 abi 9) [ 1.567459] NET: Registered protocol family 29 [ 1.571849] can: raw protocol (rev 20120528) [ 1.576099] can: broadcast manager protocol (rev 20120528 t) [ 1.581741] can: netlink gateway (rev 20130117) max_hops=1 [ 1.587465] Key type dns_resolver registered [ 1.591788] ThumbEE CPU extension supported. [ 1.595690] Registering SWP/SWPB emulation handler [ 1.605547] dwmmc_exynos 12210000.mmc: IDMAC supports 32-bit address mode. [ 1.611034] dwmmc_exynos 12210000.mmc: Using internal DMA controller. [ 1.617392] dwmmc_exynos 12210000.mmc: Version ID is 250a [ 1.622767] dwmmc_exynos 12210000.mmc: DW MMC controller at irq 70,64 bit host data width,64 deep fifo [ 1.632849] input: gpio-keys as /devices/platform/gpio-keys/input/input1 [ 1.643076] dwmmc_exynos 12210000.mmc: IDMAC supports 32-bit address mode. [ 1.648519] mmc_host mmc0: Bus speed (slot 0) = 200000000Hz (slot req 200000000Hz, actual 200000000HZ div = 0) [ 1.658704] dwmmc_exynos 12210000.mmc: Using internal DMA controller. [ 1.664886] dwmmc_exynos 12210000.mmc: Version ID is 250a [ 1.670264] dwmmc_exynos 12210000.mmc: DW MMC controller at irq 70,64 bit host data width,64 deep fifo [ 1.679987] max77686-rtc max77802-rtc: hctosys: unable to read the hardware clock [ 1.702401] Waiting for root device /dev/mmcblk0p1... [ 1.706285] mmc0: tuning execution failed: -5 [ 1.710313] mmc0: error -5 whilst initialising MMC card [ 2.572854] asix 1-1:1.0 eth0: register 'asix' at usb-xhci-hcd.2.auto-1, ASIX AX88772 USB 2.0 Ethernet, c8:b3:73:46:fb:95 [ 2.586882] dwmmc_exynos 12210000.mmc: IDMAC supports 32-bit address mode. [ 2.592340] dwmmc_exynos 12210000.mmc: Using internal DMA controller. [ 2.598714] dwmmc_exynos 12210000.mmc: Version ID is 250a [ 2.604099] dwmmc_exynos 12210000.mmc: DW MMC controller at irq 70,64 bit host data width,64 deep fifo

[PYBOOT] [pi 02:06]: Timed out waiting for "<type 'str'>":

[PYBOOT] [pi 02:07]: got exception: timeout ~$off

[PYBOOT] [pi 02:08]: Done. Board snowball-arm-multi_v7_defconfig failure log: -------------------------------------------------

[ 1.911163] ledtrig-cpu: registered to indicate activity on CPUs [ 1.917572] usbcore: registered new interface driver usbhid [ 1.923156] usbhid: USB HID core driver [ 1.931640] NET: Registered protocol family 10 [ 1.937072] sit: IPv6 over IPv4 tunneling driver [ 1.942291] NET: Registered protocol family 17 [ 1.946777] can: controller area network core (rev 20120528 abi 9) [ 1.953033] NET: Registered protocol family 29 [ 1.957489] can: raw protocol (rev 20120528) [ 1.961761] can: broadcast manager protocol (rev 20120528 t) [ 1.967437] can: netlink gateway (rev 20130117) max_hops=1 [ 1.973510] Key type dns_resolver registered [ 1.977996] ThumbEE CPU extension supported. [ 1.982299] Registering SWP/SWPB emulation handler [ 1.982940] mmc3: new high speed MMC card at address 0001 [ 1.983459] mmcblk3: mmc3:0001 3.53 GiB [ 1.983642] mmcblk3boot0: mmc3:0001 partition 1 2.00 MiB [ 1.983825] mmcblk3boot1: mmc3:0001 partition 2 2.00 MiB [ 1.984039] mmcblk3rpmb: mmc3:0001 partition 3 128 KiB [ 1.988128] mmcblk3: p1 p2 p3 p4 [ 2.018402] input: gpio_keys as /devices/soc0/gpio_keys/input/input0 [ 2.025177] rtc-pl031 80154000.rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800) [ 2.034393] thermal cooling_device0: thermal-cpufreq-0 bind to 0: 0-succeed [ 2.041412] thermal cooling_device0: thermal-cpufreq-0 bind to 1: 0-succeed [ 2.048400] thermal cooling_device0: thermal-cpufreq-0 bind to 2: 0-succeed [ 2.055389] db8500-cpufreq-cooling soc:cpufreq-cooling: Cooling device registered: thermal-cpufreq-0 [ 2.068725] db8500-esram12: disabling [ 2.072662] db8500-esram34: disabling [ 2.076629] V-CSI/DSI: disabling [ 2.079895] mmci-reg: disabling [ 2.083557] uart-pl011 80007000.uart: DMA channel TX dma0chan20 [ 2.089569] uart-pl011 80007000.uart: DMA channel RX dma0chan21 [ 2.095886] Waiting for root device /dev/mmcblk0p4...

[PYBOOT] [snowball 02:02]: Timed out waiting for "<type 'str'>":

[PYBOOT] [snowball 02:03]: got exception: timeout ~$off

[PYBOOT] [snowball 02:04]: Done. Board snowball-arm-u8500_defconfig failure log: -------------------------------------------------

[ 2.720886] ux500-msp-i2s ux500-msp-i2s.1: Failed to get DMA channel capabilities, falling back to period counting: -6 [ 2.731628] snd-soc-mop500 snd-soc-mop500.0: ab8500-codec-dai.0 <-> ux500-msp-i2s.1 mapping ok [ 2.741607] ux500-msp-i2s ux500-msp-i2s.3: Failed to get DMA channel capabilities, falling back to period counting: -6 [ 2.752380] snd-soc-mop500 snd-soc-mop500.0: ab8500-codec-dai.1 <-> ux500-msp-i2s.3 mapping ok [ 2.775238] NET: Registered protocol family 10 [ 2.790557] sit: IPv6 over IPv4 tunneling driver [ 2.795837] NET: Registered protocol family 17 [ 2.800323] NET: Registered protocol family 35 [ 2.804901] NET: Registered protocol family 37 [ 2.809448] Registering SWP/SWPB emulation handler [ 2.815734] coresight-etm3x 801ae000.ptm: PTM 1.0 initialized [ 2.822113] coresight-etm3x 801af000.ptm: PTM 1.0 initialized [ 2.828674] input: gpio_keys as /devices/soc0/gpio_keys/input/input1 [ 2.835937] ab8500-rtc ab8500-rtc.0: setting system clock to 2000-04-29 14:34:10 UTC (957018850) [ 2.845184] thermal cooling_device0: thermal-cpufreq-0 bind to 0: 0-succeed [ 2.852203] thermal cooling_device0: thermal-cpufreq-0 bind to 1: 0-succeed [ 2.859191] thermal cooling_device0: thermal-cpufreq-0 bind to 2: 0-succeed [ 2.866210] db8500-cpufreq-cooling soc:cpufreq-cooling: Cooling device registered: thermal-cpufreq-0 [ 2.879730] db8500-esram12: disabling [ 2.883483] db8500-esram34: disabling [ 2.887420] V-CSI/DSI: disabling [ 2.890686] mmci-reg: disabling [ 2.893981] ALSA device list: [ 2.896972] #0: MOP500-card [ 2.900268] uart-pl011 80007000.uart: DMA channel TX dma0chan24 [ 2.906280] uart-pl011 80007000.uart: DMA channel RX dma0chan25 [ 2.912475] Waiting for root device /dev/mmcblk0p4... Connected. cu: Got hangup signal cu: waitpid: No child processes Connected.

Disconnected.

[PYBOOT] [snowball 01:52]: Timed out waiting for "<type 'str'>":

[PYBOOT] [snowball 01:53]: got exception: timeout ~$off

[PYBOOT] [snowball 01:55]: Done.