Failed boards:

bbb multi_v7_defconfig : FAILED 1:23.76 panda multi_v7_defconfig : FAILED 1:35.31

Successful boards:

apc vt8500_v6_v7_defconfig : passed 1:17.21 arndale exynos_defconfig : passed 1:02.01 bbb omap2plus_defconfig : passed 1:31.73 beaver tegra_defconfig : passed 0:47.82 beaver multi_v7_defconfig : passed 0:48.56 capri bcm_defconfig : passed 0:43.97 capri multi_v7_defconfig : passed 0:44.23 cubie sunxi_defconfig : passed 0:50.60 cubie multi_v7_defconfig : passed 0:56.67 cubie2 sunxi_defconfig : passed 0:52.87 cubie2 multi_v7_defconfig : passed 1:09.51 cubie2 multi_lpae_defconfig : passed 0:54.49 cubox dove_defconfig : warnings 1:02.43 dalmore tegra_defconfig : passed 1:23.43 dalmore multi_v7_defconfig : passed 1:18.78 dalmore multi_lpae_defconfig : passed 1:19.15 panda omap2plus_defconfig : passed 1:16.80 sama5 sama5_defconfig : passed 1:51.09 seaboard tegra_defconfig : passed 1:03.98 seaboard multi_v7_defconfig : passed 1:10.03 snow exynos_defconfig : passed 1:20.13 snowball u8500_defconfig : passed 1:25.67 snowball multi_v7_defconfig : passed 2:06.65 trimslice tegra_defconfig : passed 0:56.66 trimslice multi_v7_defconfig : passed 1:00.57 wandboard imx_v6_v7_defconfig : passed 0:59.52 wandboard multi_v7_defconfig : passed 1:01.03

Board legend is available at http://arm-soc.lixom.net/boards.html

Last entries of failed logs below:

========================================================================

Board bbb-multi_v7_defconfig failure log: -------------------------------------------------

TFTP from server 172.16.1.3; our IP address is 172.16.1.121 Filename 'arm-soc/v3.13-rc5-881-g6e1d13f/multi_v7_defconfig/zImage'. Load address: 0x80200000 Loading: *##################################################node: bbb status: on ############### ################################################################# ################################################################# ################################################################# ##################################### 1.2 MiB/s done Bytes transferred = 4350216 (426108 hex) U-Boot# setenv serverip 172.16.1.3 setenv serverip 172.16.1.3 U-Boot# tftp 0x81f00000 arm-soc/v3.13-rc5-881-g6e1d13f/multi_v7_defconfig/dtbs/am335x-boneblack.dtb tftp 0x81f00000 arm-soc/v3.13-rc5-881-g6e1d13f/multi_v7_defconfig/dtbs/am335x-boneblack.dtb link up on port 0, speed 100, full duplex Using cpsw device TFTP from server 172.16.1.3; our IP address is 172.16.1.121 Filename 'arm-soc/v3.13-rc5-881-g6e1d13f/multi_v7_defconfig/dtbs/am335x-boneblack.dtb'. Load address: 0x81f00000 Loading: *## 602.5 KiB/s done Bytes transferred = 17911 (45f7 hex) U-Boot# setenv bootargs console=ttyO0,115200 root=/dev/mmcblk0p2 rootwait rw debug earlyprintk setenv bootargs console=ttyO0,115200 root=/dev/mmcblk0p2 rootwait rw debug earlyprintk U-Boot# printenv bootargs printenv bootargs bootargs=console=ttyO0,115200 root=/dev/mmcblk0p2 rootwait rw debug earlyprintk U-Boot# bootz 0x80200000 - 0x81f00000 bootz 0x80200000 - 0x81f00000 ## Flattened Device Tree blob at 81f00000 Booting using the fdt blob at 0x81f00000 Using Device Tree in place at 81f00000, end 81f075f6

Starting kernel ...

~$off # PYBOOT: Exception: timeout

========================================================================

Board panda-multi_v7_defconfig failure log: -------------------------------------------------

[ 1.415039] omap-dma-engine 4a056000.dma-controller: freeing channel for 62 [ 1.422393] platform 4809c000.mmc: Driver omap_hsmmc requests probe deferral [ 1.429840] omap_hsmmc 480d5000.mmc: could not find pctldev for node /ocp/pinmux@4a100040/pinmux_wl12xx_pins, deferring probe [ 1.441711] platform 480d5000.mmc: Driver omap_hsmmc requests probe deferral [ 1.449371] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.456207] usbcore: registered new interface driver usbhid [ 1.462066] usbhid: USB HID core driver [ 1.469024] TCP: cubic registered [ 1.472503] NET: Registered protocol family 17 [ 1.477355] Key type dns_resolver registered [ 1.482238] Power Management for TI OMAP4+ devices. [ 1.487396] Power Management for TI OMAP4. [ 1.491699] OMAP4 PM: u-boot >= v2012.07 is required for full PM support [ 1.498840] Registering SWP/SWPB emulation handler [ 1.504730] reg-fixed-voltage wl12xx_vmmc.10: could not find pctldev for node /ocp/pinmux@4a100040/pinmux_wl12xx_gpio, deferring probe [ 1.517547] platform wl12xx_vmmc.10: Driver reg-fixed-voltage requests probe deferral [ 1.525909] omap_i2c 48070000.i2c: could not find pctldev for node /ocp/pinmux@4a100040/pinmux_i2c1_pins, deferring probe [ 1.537658] platform 48070000.i2c: Driver omap_i2c requests probe deferral [ 1.537658] omap_i2c 48072000.i2c: could not find pctldev for node /ocp/pinmux@4a100040/pinmux_i2c2_pins, deferring probe [ 1.556671] platform 48072000.i2c: Driver omap_i2c requests probe deferral [ 1.556671] omap_i2c 48060000.i2c: could not find pctldev for node /ocp/pinmux@4a100040/pinmux_i2c3_pins, deferring probe [ 1.575714] platform 48060000.i2c: Driver omap_i2c requests probe deferral [ 1.583221] omap_i2c 48350000.i2c: could not find pctldev for node /ocp/pinmux@4a100040/pinmux_i2c4_pins, deferring probe [ 1.594726] platform 48350000.i2c: Driver omap_i2c requests probe deferral [ 1.602539] omap-dma-engine 4a056000.dma-controller: allocating channel for 62 [ 1.610137] omap-dma-engine 4a056000.dma-controller: allocating channel for 61 [ 1.617767] omap_hsmmc 4809c000.mmc: vmmc regulator missing [ 1.623626] omap-dma-engine 4a056000.dma-controller: freeing channel for 61 [ 1.630920] omap-dma-engine 4a056000.dma-controller: freeing channel for 62 [ 1.638244] platform 4809c000.mmc: Driver omap_hsmmc requests probe deferral [ 1.638244] omap_hsmmc 480d5000.mmc: could not find pctldev for node /ocp/pinmux@4a100040/pinmux_wl12xx_pins, deferring probe [ 1.657867] platform 480d5000.mmc: Driver omap_hsmmc requests probe deferral [ 1.665649] /home/build/work/batch/drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 1.674316] spear_cpufreq: Invalid cpufreq_tbl [ 1.678985] ALSA device list: [ 1.682312] No soundcards found. [ 1.685913] omap_uart 48020000.serial: no wakeirq for uart2 [ 1.692230] Waiting for root device /dev/mmcblk0p2... ~$off # PYBOOT: Exception: timeout