Full logs are available at http://arm-soc.lixom.net/bootlogs/stable-rc/v4.4.33-38-geffdc423e/
Failed boards:
arndale arm-multi_v7_nosmp_defconfig : FAILED 3:34.31 bbb arm-omap2plus_defconfig : FAILED 1:55.45 bbb arm-multi_v7_defconfig : FAILED 2:09.00 bbb arm-multi_v7_nosmp_defconfig : FAILED 3:40.18 beagleboard-x15 arm-omap2plus_defconfig : FAILED 1:46.51 beagleboard-x15 arm-multi_v7_defconfig : FAILED 1:46.00 beagleboard-x15 arm-multi_lpae_defconfig : FAILED 2:07.59 beagleboard-x15 arm-multi_v7_nosmp_defconfig : FAILED 2:23.59 beaver arm-tegra_defconfig : FAILED 1:46.17 beaver arm-multi_v7_defconfig : FAILED 2:03.91 beaver arm-multi_v7_nosmp_defconfig : FAILED 2:38.91 colombus arm-multi_v7_nosmp_defconfig : FAILED 3:26.79 jetsontx1 arm64-defconfig : NO DTB jetsontx1 arm64-nosmp_defconfig : NO DTB odroidu3 arm-exynos_defconfig : FAILED 2:09.21 odroidu3 arm-multi_v7_defconfig : FAILED 2:11.52 seaboard arm-tegra_defconfig : FAILED 2:05.35 seaboard arm-multi_v7_nosmp_defconfig : FAILED 3:03.07 snowball arm-u8500_defconfig : FAILED 2:12.11 snowball arm-multi_v7_defconfig : FAILED 2:36.36 snowball arm-multi_v7_nosmp_defconfig : FAILED 3:35.38
Successful boards:
apc arm-vt8500_v6_v7_defconfig : passed 1:21.29 arndale arm-exynos_defconfig : warnings 1:39.15 arndale arm-multi_v7_defconfig : passed 1:31.89 arndale arm-multi_lpae_defconfig : passed 3:14.49 capri arm-multi_v7_defconfig : passed 1:02.53 capri arm-multi_v7_nosmp_defconfig : warnings 1:02.53 chitra powerpc-pasemi_defconfig : passed 3:49.70 chitra powerpc-ppc64_defconfig : passed 3:43.48 colombus arm-sunxi_defconfig : passed 2:23.00 colombus arm-multi_v7_defconfig : passed 3:51.82 cosmic arm-imx_v6_v7_defconfig : passed 3:18.99 cosmic arm-multi_v7_defconfig : passed 4:44.38 cosmic arm-multi_v7_nosmp_defconfig : passed 2:52.14 cubie arm-sunxi_defconfig : passed 1:03.16 cubie arm-multi_v7_defconfig : passed 1:09.14 cubie arm-multi_v7_nosmp_defconfig : passed 1:17.01 cubie2 arm-sunxi_defconfig : passed 0:52.53 cubie2 arm-multi_v7_defconfig : passed 1:24.65 cubie2 arm-multi_v7_nosmp_defconfig : warnings 2:06.01 cubox arm-multi_v7_defconfig : passed 1:24.66 cubox arm-multi_v7_nosmp_defconfig : passed 2:11.55 jetsontk1 arm-tegra_defconfig : passed 1:32.93 jetsontk1 arm-multi_v7_defconfig : passed 1:52.63 jetsontk1 arm-multi_lpae_defconfig : passed 2:50.38 jetsontk1 arm-multi_v7_nosmp_defconfig : warnings 1:32.74 minnowmax x86-minnowmax_defconfig : passed 1:40.78 omap5uevm arm-omap2plus_defconfig : passed 1:06.72 omap5uevm arm-multi_v7_defconfig : passed 1:19.87 omap5uevm arm-multi_lpae_defconfig : passed 1:40.10 pandaes arm-omap2plus_defconfig : warnings 1:39.29 pandaes arm-multi_v7_defconfig : passed 2:07.95 pandaes arm-multi_v7_nosmp_defconfig : warnings 1:59.68 parallella arm-multi_v7_nosmp_defconfig : warnings 3:05.22 pi arm-exynos_defconfig : passed 1:31.49 pi arm-multi_v7_defconfig : passed 1:42.06 pi arm-multi_lpae_defconfig : passed 1:56.00 pi arm-multi_v7_nosmp_defconfig : warnings 2:07.27 pit arm-exynos_defconfig : passed 1:31.89 pit arm-multi_v7_defconfig : passed 1:38.96 pit arm-multi_v7_nosmp_defconfig : warnings 1:56.57 seattle arm64-defconfig : passed 3:22.54 seattle arm64-nosmp_defconfig : passed 2:28.11 trimslice arm-tegra_defconfig : passed 1:59.02 trimslice arm-multi_v7_nosmp_defconfig : warnings 3:41.03 wandboard arm-imx_v6_v7_defconfig : passed 1:19.55 wandboard arm-multi_v7_defconfig : passed 1:30.66 wandboard arm-multi_v7_nosmp_defconfig : warnings 1:23.07
Offline boards:
colibri-vf61 arm-imx_v6_v7_defconfig : OFFLINE 1:16.09 colibri-vf61 arm-multi_v7_defconfig : OFFLINE 1:27.63 colibri-vf61 arm-multi_v7_nosmp_defconfig : OFFLINE 1:56.54 colombus arm-multi_lpae_defconfig : OFFLINE 0:38.69 cubie2 arm-multi_lpae_defconfig : OFFLINE 2:45.14 cubox arm-mvebu_v7_defconfig : OFFLINE 2:10.93 dalmore arm-tegra_defconfig : OFFLINE 2:37.74 dalmore arm-multi_v7_defconfig : OFFLINE 3:11.56 dalmore arm-multi_lpae_defconfig : OFFLINE 3:17.89 dalmore arm-multi_v7_nosmp_defconfig : OFFLINE 2:22.50 hummingboard arm-imx_v6_v7_defconfig : OFFLINE 3:53.28 hummingboard arm-multi_v7_defconfig : OFFLINE 3:20.12 hummingboard arm-multi_v7_nosmp_defconfig : OFFLINE 2:16.20 omap5uevm arm-multi_v7_nosmp_defconfig : OFFLINE 2:23.38 parallella arm-multi_v7_defconfig : OFFLINE 2:44.31 pit arm-multi_lpae_defconfig : OFFLINE 2:26.00 rk3288evb arm-multi_v7_defconfig : OFFLINE 1:41.15 rk3288evb arm-multi_lpae_defconfig : OFFLINE 2:27.33 rk3288evb arm-multi_v7_nosmp_defconfig : OFFLINE 0:44.79 sama5 arm-sama5_defconfig : OFFLINE 2:29.54 sama5d3-xplained arm-sama5_defconfig : OFFLINE 2:49.91 seaboard arm-multi_v7_defconfig : OFFLINE 2:36.10 snow arm-exynos_defconfig : OFFLINE 3:27.81 snow arm-multi_v7_defconfig : OFFLINE 3:33.87 snow arm-multi_lpae_defconfig : OFFLINE 2:17.68 snow arm-multi_v7_nosmp_defconfig : OFFLINE 2:14.97 socfpga arm-socfpga_defconfig : OFFLINE 3:23.15 socfpga arm-multi_v7_defconfig : OFFLINE 3:00.71 socfpga arm-multi_v7_nosmp_defconfig : OFFLINE 2:25.50 trimslice arm-multi_v7_defconfig : OFFLINE 2:46.02
Board legend is available at http://arm-soc.lixom.net/boards.html
Board arndale-arm-multi_v7_nosmp_defconfig failure log: -------------------------------------------------
[ 2.112022] dwmmc_exynos 12220000.mmc: DW MMC controller at irq 102,32 bit host data width,128 deep fifo [ 2.121508] dwmmc_exynos 12220000.mmc: No vqmmc regulator found [ 2.154354] dwmmc_exynos 12220000.mmc: 1 slots initialized [ 2.158855] sdhci-pltfm: SDHCI platform and OF driver helper [ 2.165098] ledtrig-cpu: registered to indicate activity on CPUs [ 2.170099] usbcore: registered new interface driver usbhid [ 2.175545] usbhid: USB HID core driver [ 2.181667] NET: Registered protocol family 10 [ 2.185051] sit: IPv6 over IPv4 tunneling driver [ 2.189538] NET: Registered protocol family 17 [ 2.193661] can: controller area network core (rev 20120528 abi 9) [ 2.199854] NET: Registered protocol family 29 [ 2.204249] can: raw protocol (rev 20120528) [ 2.208507] can: broadcast manager protocol (rev 20120528 t) [ 2.214151] can: netlink gateway (rev 20130117) max_hops=1 [ 2.219809] Key type dns_resolver registered [ 2.224131] ThumbEE CPU extension supported. [ 2.229130] ahci 122f0000.sata: couldn't get PHY in node sata: -517 [ 2.235573] input: gpio_keys as /devices/platform/gpio_keys/input/input0 [ 2.241227] hctosys: unable to open rtc device (rtc0) [ 2.249651] MAIN_DC: disabling [ 2.251227] hdmi-en: disabling [ 2.254640] ahci 122f0000.sata: couldn't get PHY in node sata: -517 [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 4.4.34-rc1-00038-geffdc423e (build@brutus) (gcc version 4.9.2 (GCC) ) #1 Sat Nov 19 06:22:25 PST 2016 [ 0.000000] CPU: ARMv7 Processor [410fc0f4] revision 4 (ARMv7), cr=10c53c7d [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache [ 0.000000] Machine model: Insignal Arndale evaluation board based on EXYNOS5250 [ 0.000000] cma: Reserved 64 MiB at 0xbc000000 [ 0.000000] Memory policy: Data cache writeback [ 0.000000] Samsung CPU ID: 0x43520010 [ 0.000000] On node 0 totalpages: 520192 [ 0.000000] free_area_init_node: node 0, pgdat c0f70968, node_mem_map eeff7000
[PYBOOT] [arndale 03:31]: Timed out waiting for "<type 'str'>":
[PYBOOT] [arndale 03:32]: got exception: timeout ~$off
[PYBOOT] [arndale 03:33]: Done. Board bbb-arm-multi_v7_defconfig failure log: -------------------------------------------------
[ 1.534617] omap_hsmmc 48060000.mmc: Got CD GPIO [ 1.600820] Synopsys Designware Multimedia Card Interface Driver [ 1.608621] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.618238] ledtrig-cpu: registered to indicate activity on CPUs [ 1.625076] usbcore: registered new interface driver usbhid [ 1.630977] usbhid: USB HID core driver [ 1.641660] NET: Registered protocol family 10 [ 1.648154] sit: IPv6 over IPv4 tunneling driver [ 1.654305] NET: Registered protocol family 17 [ 1.659072] can: controller area network core (rev 20120528 abi 9) [ 1.665711] NET: Registered protocol family 29 [ 1.670432] can: raw protocol (rev 20120528) [ 1.674955] can: broadcast manager protocol (rev 20120528 t) [ 1.680951] can: netlink gateway (rev 20130117) max_hops=1 [ 1.687640] Key type dns_resolver registered [ 1.692518] omap_voltage_late_init: Voltage driver support not added [ 1.700654] ThumbEE CPU extension supported. [ 1.705264] Registering SWP/SWPB emulation handler [ 1.719176] at24 0-0050: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.726928] omap_i2c 44e0b000.i2c: bus 0 rev0.11 at 400 kHz [ 1.735329] at24 2-0054: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.742997] at24 2-0055: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.750589] at24 2-0056: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.758145] at24 2-0057: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.765466] omap_i2c 4819c000.i2c: bus 2 rev0.11 at 100 kHz [ 1.773635] hctosys: unable to open rtc device (rtc0) [ 1.787271] Waiting for root device /dev/mmcblk1p2... [ 1.822836] mmc1: MAN_BKOPS_EN bit is not set [ 1.829356] mmc1: new high speed MMC card at address 0001 [ 1.836018] mmcblk0: mmc1:0001 MMC02G 1.79 GiB [ 1.841221] mmcblk0boot0: mmc1:0001 MMC02G partition 1 1.00 MiB [ 1.847821] mmcblk0boot1: mmc1:0001 MMC02G partition 2 1.00 MiB [ 1.856351] mmcblk0: p1 p2
[PYBOOT] [bbb 02:06]: Timed out waiting for "<type 'str'>":
[PYBOOT] [bbb 02:07]: got exception: timeout ~$off
[PYBOOT] [bbb 02:08]: Done. Board bbb-arm-multi_v7_nosmp_defconfig failure log: -------------------------------------------------
[ 1.349886] sdhci: Copyright(c) Pierre Ossman [ 1.355641] omap_hsmmc 48060000.mmc: Got CD GPIO [ 1.418952] Synopsys Designware Multimedia Card Interface Driver [ 1.426434] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.435459] ledtrig-cpu: registered to indicate activity on CPUs [ 1.442177] usbcore: registered new interface driver usbhid [ 1.448057] usbhid: USB HID core driver [ 1.457333] NET: Registered protocol family 10 [ 1.463837] sit: IPv6 over IPv4 tunneling driver [ 1.469767] NET: Registered protocol family 17 [ 1.474503] can: controller area network core (rev 20120528 abi 9) [ 1.481100] NET: Registered protocol family 29 [ 1.485800] can: raw protocol (rev 20120528) [ 1.490313] can: broadcast manager protocol (rev 20120528 t) [ 1.496292] can: netlink gateway (rev 20130117) max_hops=1 [ 1.502895] Key type dns_resolver registered [ 1.507670] omap_voltage_late_init: Voltage driver support not added [ 1.515516] ThumbEE CPU extension supported. [ 1.527751] at24 0-0050: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.535360] omap_i2c 44e0b000.i2c: bus 0 rev0.11 at 400 kHz [ 1.543145] at24 2-0054: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.550671] at24 2-0055: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.558161] at24 2-0056: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.565641] at24 2-0057: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.572914] omap_i2c 4819c000.i2c: bus 2 rev0.11 at 100 kHz [ 1.580528] hctosys: unable to open rtc device (rtc0) [ 1.591544] Waiting for root device /dev/mmcblk1p2... [ 1.626055] mmc1: MAN_BKOPS_EN bit is not set [ 1.632436] mmc1: new high speed MMC card at address 0001 [ 1.638881] mmcblk0: mmc1:0001 MMC02G 1.79 GiB [ 1.643942] mmcblk0boot0: mmc1:0001 MMC02G partition 1 1.00 MiB [ 1.650411] mmcblk0boot1: mmc1:0001 MMC02G partition 2 1.00 MiB [ 1.658663] mmcblk0: p1 p2
[PYBOOT] [bbb 03:37]: Timed out waiting for "<type 'str'>":
[PYBOOT] [bbb 03:38]: got exception: timeout ~$off
[PYBOOT] [bbb 03:39]: Done. Board bbb-arm-omap2plus_defconfig failure log: -------------------------------------------------
[ 2.071820] omap_hsmmc 481d8000.mmc: GPIO lookup for consumer wp [ 2.078154] omap_hsmmc 481d8000.mmc: using device tree for GPIO lookup [ 2.085038] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@481d8000[0]' [ 2.094645] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@481d8000[0]' [ 2.104155] omap_hsmmc 481d8000.mmc: using lookup tables for GPIO lookup [ 2.111182] omap_hsmmc 481d8000.mmc: lookup for GPIO wp failed [ 2.154651] ledtrig-cpu: registered to indicate activity on CPUs [ 2.162842] oprofile: using arm/armv7 [ 2.168043] Initializing XFRM netlink socket [ 2.173130] NET: Registered protocol family 10 [ 2.183568] sit: IPv6 over IPv4 tunneling driver [ 2.192381] NET: Registered protocol family 17 [ 2.197321] NET: Registered protocol family 15 [ 2.202598] Key type dns_resolver registered [ 2.207545] omap_voltage_late_init: Voltage driver support not added [ 2.214292] sr_dev_init: No voltage domain specified for smartreflex0. Cannot initialize [ 2.222768] sr_dev_init: No voltage domain specified for smartreflex1. Cannot initialize [ 2.233057] ThumbEE CPU extension supported. [ 2.237718] Registering SWP/SWPB emulation handler [ 2.242759] SmartReflex Class3 initialized [ 2.299638] mmc1: MAN_BKOPS_EN bit is not set [ 2.309586] mmc1: new high speed MMC card at address 0001 [ 2.321188] mmcblk0: mmc1:0001 MMC02G 1.79 GiB [ 2.331576] mmcblk0boot0: mmc1:0001 MMC02G partition 1 1.00 MiB [ 2.342322] mmcblk0boot1: mmc1:0001 MMC02G partition 2 1.00 MiB [ 2.359767] mmcblk0: p1 p2 [ 2.381761] tps65217 0-0024: TPS65217 ID 0xe version 1.2 [ 2.389134] omap_i2c 44e0b000.i2c: bus 0 rev0.11 at 400 kHz [ 2.401822] omap_i2c 4819c000.i2c: bus 2 rev0.11 at 100 kHz [ 2.410171] hctosys: unable to open rtc device (rtc0) [ 2.415617] sr_init: No PMIC hook to init smartreflex [ 2.421275] sr_init: platform driver register failed for SR [ 2.466475] Waiting for root device /dev/mmcblk1p2...
[PYBOOT] [bbb 01:52]: Timed out waiting for "<type 'str'>":
[PYBOOT] [bbb 01:53]: got exception: timeout ~$off
[PYBOOT] [bbb 01:55]: Done. Board beagleboard-x15-arm-multi_lpae_defconfig failure log: -------------------------------------------------
[ 1.571681] NET: Registered protocol family 10 [ 1.576935] sit: IPv6 over IPv4 tunneling driver [ 1.582219] NET: Registered protocol family 17 [ 1.586880] can: controller area network core (rev 20120528 abi 9) [ 1.593385] NET: Registered protocol family 29 [ 1.598039] can: raw protocol (rev 20120528) [ 1.602509] can: broadcast manager protocol (rev 20120528 t) [ 1.608431] can: netlink gateway (rev 20130117) max_hops=1 [ 1.614475] Key type dns_resolver registered [ 1.619033] omap_voltage_late_init: Voltage driver support not added [ 1.626167] Power Management for TI OMAP4+ devices. [ 1.631472] ThumbEE CPU extension supported. [ 1.635957] Registering SWP/SWPB emulation handler [ 1.642755] palmas 0-0058: Irq flag is 0x00000008 [ 1.667402] palmas 0-0058: Muxing GPIO 2f, PWM 0, LED 0 [ 1.699032] palmas-rtc 48070000.i2c:tps659038@58:tps659038_rtc: rtc core: registered 48070000.i2c:tps659 as rtc1 [ 1.713181] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 1.735685] rtc-ds1307 2-006f: SET TIME! [ 1.741412] rtc-ds1307 2-006f: rtc core: registered mcp7941x as rtc0 [ 1.748150] rtc-ds1307 2-006f: 64 bytes nvram [ 1.752754] omap_i2c 48060000.i2c: bus 2 rev0.12 at 400 kHz [ 1.761575] omap_hsmmc 4809c000.mmc: Got CD GPIO [ 1.796182] vdd_3v3: supplied by regen1 [ 1.837082] rtc-ds1307 2-006f: setting system clock to 2001-01-01 00:00:00 UTC (978307200) [ 1.854166] aic_dvdd_fixed: disabling [ 1.858179] ldousb: disabling [ 1.862225] Waiting for root device /dev/mmcblk1p1... [ 1.869771] mmc1: MAN_BKOPS_EN bit is not set [ 1.881768] mmc1: new high speed MMC card at address 0001 [ 1.887750] mmcblk0: mmc1:0001 S10004 3.56 GiB [ 1.892640] mmcblk0boot0: mmc1:0001 S10004 partition 1 4.00 MiB [ 1.898992] mmcblk0boot1: mmc1:0001 S10004 partition 2 4.00 MiB [ 1.905858] mmcblk0: p1
[PYBOOT] [beagleboard-x15 02:04]: Timed out waiting for "<type 'str'>":
[PYBOOT] [beagleboard-x15 02:05]: got exception: timeout ~$off
[PYBOOT] [beagleboard-x15 02:06]: Done. Board beagleboard-x15-arm-multi_v7_defconfig failure log: -------------------------------------------------
[ 1.571558] NET: Registered protocol family 10 [ 1.576835] sit: IPv6 over IPv4 tunneling driver [ 1.582115] NET: Registered protocol family 17 [ 1.586781] can: controller area network core (rev 20120528 abi 9) [ 1.593292] NET: Registered protocol family 29 [ 1.597954] can: raw protocol (rev 20120528) [ 1.602424] can: broadcast manager protocol (rev 20120528 t) [ 1.608354] can: netlink gateway (rev 20130117) max_hops=1 [ 1.614397] Key type dns_resolver registered [ 1.618955] omap_voltage_late_init: Voltage driver support not added [ 1.626101] Power Management for TI OMAP4+ devices. [ 1.631413] ThumbEE CPU extension supported. [ 1.635908] Registering SWP/SWPB emulation handler [ 1.642720] palmas 0-0058: Irq flag is 0x00000008 [ 1.667163] palmas 0-0058: Muxing GPIO 2f, PWM 0, LED 0 [ 1.697888] palmas-rtc 48070000.i2c:tps659038@58:tps659038_rtc: rtc core: registered 48070000.i2c:tps659 as rtc1 [ 1.711966] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 1.735563] rtc-ds1307 2-006f: SET TIME! [ 1.741321] rtc-ds1307 2-006f: rtc core: registered mcp7941x as rtc0 [ 1.748069] rtc-ds1307 2-006f: 64 bytes nvram [ 1.752673] omap_i2c 48060000.i2c: bus 2 rev0.12 at 400 kHz [ 1.761499] omap_hsmmc 4809c000.mmc: Got CD GPIO [ 1.796016] vdd_3v3: supplied by regen1 [ 1.836956] rtc-ds1307 2-006f: setting system clock to 2001-01-01 00:00:00 UTC (978307200) [ 1.854045] aic_dvdd_fixed: disabling [ 1.858051] ldousb: disabling [ 1.862105] Waiting for root device /dev/mmcblk1p1... [ 1.869634] mmc1: MAN_BKOPS_EN bit is not set [ 1.881660] mmc1: new high speed MMC card at address 0001 [ 1.887645] mmcblk0: mmc1:0001 S10004 3.56 GiB [ 1.892532] mmcblk0boot0: mmc1:0001 S10004 partition 1 4.00 MiB [ 1.898888] mmcblk0boot1: mmc1:0001 S10004 partition 2 4.00 MiB [ 1.905748] mmcblk0: p1
[PYBOOT] [beagleboard-x15 01:43]: Timed out waiting for "<type 'str'>":
[PYBOOT] [beagleboard-x15 01:44]: got exception: timeout ~$off
[PYBOOT] [beagleboard-x15 01:45]: Done. Board beagleboard-x15-arm-multi_v7_nosmp_defconfig failure log: -------------------------------------------------
[ 1.455829] NET: Registered protocol family 10 [ 1.461080] sit: IPv6 over IPv4 tunneling driver [ 1.466255] NET: Registered protocol family 17 [ 1.470924] can: controller area network core (rev 20120528 abi 9) [ 1.477430] NET: Registered protocol family 29 [ 1.482090] can: raw protocol (rev 20120528) [ 1.486564] can: broadcast manager protocol (rev 20120528 t) [ 1.492505] can: netlink gateway (rev 20130117) max_hops=1 [ 1.498468] Key type dns_resolver registered [ 1.503008] omap_voltage_late_init: Voltage driver support not added [ 1.509953] Power Management for TI OMAP4+ devices. [ 1.515226] ThumbEE CPU extension supported. [ 1.519803] ata1: SATA link down (SStatus 0 SControl 300) [ 1.526719] palmas 0-0058: Irq flag is 0x00000008 [ 1.550935] palmas 0-0058: Muxing GPIO 2f, PWM 0, LED 0 [ 1.579012] palmas-rtc 48070000.i2c:tps659038@58:tps659038_rtc: rtc core: registered 48070000.i2c:tps659 as rtc1 [ 1.592303] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 1.614506] rtc-ds1307 2-006f: SET TIME! [ 1.620127] rtc-ds1307 2-006f: rtc core: registered mcp7941x as rtc0 [ 1.626828] rtc-ds1307 2-006f: 64 bytes nvram [ 1.631414] omap_i2c 48060000.i2c: bus 2 rev0.12 at 400 kHz [ 1.639220] omap_hsmmc 4809c000.mmc: Got CD GPIO [ 1.674706] vdd_3v3: supplied by regen1 [ 1.709860] rtc-ds1307 2-006f: setting system clock to 2001-01-01 00:00:00 UTC (978307200) [ 1.722300] aic_dvdd_fixed: disabling [ 1.726301] ldousb: disabling [ 1.730089] Waiting for root device /dev/mmcblk1p1... [ 1.768619] mmc1: MAN_BKOPS_EN bit is not set [ 1.780618] mmc1: new high speed MMC card at address 0001 [ 1.786487] mmcblk0: mmc1:0001 S10004 3.56 GiB [ 1.791317] mmcblk0boot0: mmc1:0001 S10004 partition 1 4.00 MiB [ 1.797602] mmcblk0boot1: mmc1:0001 S10004 partition 2 4.00 MiB [ 1.804342] mmcblk0: p1
[PYBOOT] [beagleboard-x15 02:20]: Timed out waiting for "<type 'str'>":
[PYBOOT] [beagleboard-x15 02:21]: got exception: timeout ~$off
[PYBOOT] [beagleboard-x15 02:22]: Done. Board beagleboard-x15-arm-omap2plus_defconfig failure log: -------------------------------------------------
[ 2.178253] of_get_named_gpiod_flags: parsed 'cd-gpios' property of node '/ocp/mmc@4809c000[0]' - status (0) [ 2.188644] omap_hsmmc 4809c000.mmc: Got CD GPIO [ 2.193508] omap_hsmmc 4809c000.mmc: GPIO lookup for consumer wp [ 2.199811] omap_hsmmc 4809c000.mmc: using device tree for GPIO lookup [ 2.206679] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@4809c000[0]' [ 2.216287] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@4809c000[0]' [ 2.225808] omap_hsmmc 4809c000.mmc: using lookup tables for GPIO lookup [ 2.232869] omap_hsmmc 4809c000.mmc: lookup for GPIO wp failed [ 2.282681] omap_hsmmc 480b4000.mmc: GPIO lookup for consumer cd [ 2.288997] omap_hsmmc 480b4000.mmc: using device tree for GPIO lookup [ 2.295869] of_get_named_gpiod_flags: can't parse 'cd-gpios' property of node '/ocp/mmc@480b4000[0]' [ 2.305465] of_get_named_gpiod_flags: can't parse 'cd-gpio' property of node '/ocp/mmc@480b4000[0]' [ 2.314980] omap_hsmmc 480b4000.mmc: using lookup tables for GPIO lookup [ 2.322035] omap_hsmmc 480b4000.mmc: lookup for GPIO cd failed [ 2.328164] omap_hsmmc 480b4000.mmc: GPIO lookup for consumer wp [ 2.334475] omap_hsmmc 480b4000.mmc: using device tree for GPIO lookup [ 2.341368] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@480b4000[0]' [ 2.351010] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@480b4000[0]' [ 2.360537] omap_hsmmc 480b4000.mmc: using lookup tables for GPIO lookup [ 2.367625] omap_hsmmc 480b4000.mmc: lookup for GPIO wp failed [ 2.374440] vdd_3v3: supplied by regen1 [ 2.413015] hctosys: unable to open rtc device (rtc0) [ 2.418330] sr_init: No PMIC hook to init smartreflex [ 2.423897] sr_init: platform driver register failed for SR [ 2.467004] mmc1: MAN_BKOPS_EN bit is not set [ 2.475404] aic_dvdd_fixed: disabling [ 2.479637] ldousb: disabling [ 2.484032] mmc1: new high speed MMC card at address 0001 [ 2.490344] Waiting for root device /dev/mmcblk1p1... [ 2.491642] mmcblk0: mmc1:0001 S10004 3.56 GiB [ 2.492351] mmcblk0boot0: mmc1:0001 S10004 partition 1 4.00 MiB [ 2.493143] mmcblk0boot1: mmc1:0001 S10004 partition 2 4.00 MiB [ 2.506853] mmcblk0: p1
[PYBOOT] [beagleboard-x15 01:43]: Timed out waiting for "<type 'str'>":
[PYBOOT] [beagleboard-x15 01:44]: got exception: timeout ~$off
[PYBOOT] [beagleboard-x15 01:46]: Done. Board beaver-arm-multi_v7_defconfig failure log: -------------------------------------------------
[ 3.178332] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 3.183916] r8169 0000:01:00.0: enabling device (0140 -> 0143) [ 3.191013] r8169 0000:01:00.0 eth0: RTL8168evl/8111evl at 0xf08d6000, 02:04:4b:01:60:99, XID 0c900800 IRQ 375 [ 3.201013] r8169 0000:01:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko] [ 3.210331] +VDD_5V_HDMI: supplied by sys_3v3,vdd_3v3_alw [ 3.215820] vdd_1v8_gen: supplied by vdd_5v_in [ 3.221991] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 3.228613] [drm] No driver support for vblank timestamp query. [ 3.234565] drm drm: No connectors reported connected with modes [ 3.240574] [drm] Cannot find any crtc or sizes - going 1024x768 [ 3.266037] Console: switching to colour frame buffer device 128x48 [ 3.278072] drm drm: fb0: frame buffer device [ 3.293270] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 3.301712] usb3_vbus: supplied by vdd_5v_in [ 3.308088] utmi_phy_clk_enable: timeout waiting for phy to stabilize [ 3.314554] tegra-ehci 7d004000.usb: EHCI Host Controller [ 3.319964] tegra-ehci 7d004000.usb: new USB bus registered, assigned bus number 1 [ 3.327778] tegra-ehci 7d004000.usb: irq 343, io mem 0x7d004000 [ 3.343279] tegra-ehci 7d004000.usb: USB 2.0 started, EHCI 1.00 [ 3.350128] hub 1-0:1.0: USB hub found [ 3.353910] hub 1-0:1.0: 1 port detected [ 3.358761] tegra-ehci 7d008000.usb: EHCI Host Controller [ 3.364180] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 2 [ 3.371976] tegra-ehci 7d008000.usb: irq 344, io mem 0x7d008000 [ 3.388270] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.00 [ 3.395034] hub 2-0:1.0: USB hub found [ 3.398809] hub 2-0:1.0: 1 port detected [ 3.407281] tps65910-rtc tps65910-rtc: setting system clock to 2000-01-01 00:00:02 UTC (946684802) [ 3.421092] vdd_sata,avdd_plle: disabling [ 3.425546] usb1_vbus: disabling [ 3.429591] Waiting for root device /dev/mmcblk1p1... [ 3.708280] usb 2-1: new high-speed USB device number 2 using tegra-ehci [ 4.646811] asix 2-1:1.0 eth1: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 58:6d:8f:50:ba:18
[PYBOOT] [beaver 02:00]: Timed out waiting for "<type 'str'>":
[PYBOOT] [beaver 02:01]: got exception: timeout ~$off
[PYBOOT] [beaver 02:02]: Done. Board beaver-arm-multi_v7_nosmp_defconfig failure log: -------------------------------------------------
[ 3.157915] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 3.163498] r8169 0000:01:00.0: enabling device (0140 -> 0143) [ 3.170101] r8169 0000:01:00.0 eth0: RTL8168evl/8111evl at 0xf08d6000, 02:04:4b:01:60:99, XID 0c900800 IRQ 375 [ 3.180092] r8169 0000:01:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko] [ 3.189265] +VDD_5V_HDMI: supplied by sys_3v3,vdd_3v3_alw [ 3.194747] vdd_1v8_gen: supplied by vdd_5v_in [ 3.200348] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 3.206960] [drm] No driver support for vblank timestamp query. [ 3.212890] drm drm: No connectors reported connected with modes [ 3.218894] [drm] Cannot find any crtc or sizes - going 1024x768 [ 3.238149] Console: switching to colour frame buffer device 128x48 [ 3.249887] drm drm: fb0: frame buffer device [ 3.254323] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 3.262278] usb3_vbus: supplied by vdd_5v_in [ 3.268523] utmi_phy_clk_enable: timeout waiting for phy to stabilize [ 3.274968] tegra-ehci 7d004000.usb: EHCI Host Controller [ 3.280370] tegra-ehci 7d004000.usb: new USB bus registered, assigned bus number 1 [ 3.288094] tegra-ehci 7d004000.usb: irq 343, io mem 0x7d004000 [ 3.302997] tegra-ehci 7d004000.usb: USB 2.0 started, EHCI 1.00 [ 3.309346] hub 1-0:1.0: USB hub found [ 3.313110] hub 1-0:1.0: 1 port detected [ 3.317751] tegra-ehci 7d008000.usb: EHCI Host Controller [ 3.323157] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 2 [ 3.330812] tegra-ehci 7d008000.usb: irq 344, io mem 0x7d008000 [ 3.342992] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.00 [ 3.349261] hub 2-0:1.0: USB hub found [ 3.353025] hub 2-0:1.0: 1 port detected [ 3.360500] tps65910-rtc tps65910-rtc: setting system clock to 2000-01-01 00:00:02 UTC (946684802) [ 3.373763] vdd_sata,avdd_plle: disabling [ 3.378153] usb1_vbus: disabling [ 3.382064] Waiting for root device /dev/mmcblk1p1... [ 3.662999] usb 2-1: new high-speed USB device number 2 using tegra-ehci [ 4.601510] asix 2-1:1.0 eth1: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 58:6d:8f:50:ba:18
[PYBOOT] [beaver 02:36]: Timed out waiting for "<type 'str'>":
[PYBOOT] [beaver 02:37]: got exception: timeout ~$off
[PYBOOT] [beaver 02:38]: Done. Board beaver-arm-tegra_defconfig failure log: -------------------------------------------------
[ 3.603943] r8169 0000:01:00.0 eth0: RTL8168evl/8111evl at 0xf08b6000, 02:04:4b:01:60:99, XID 0c900800 IRQ 375 [ 3.613945] r8169 0000:01:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko] [ 3.622829] +VDD_5V_HDMI: supplied by sys_3v3,vdd_3v3_alw [ 3.628353] vdd_1v8_gen: supplied by vdd_5v_in [ 3.636722] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 3.643358] [drm] No driver support for vblank timestamp query. [ 3.649359] drm drm: No connectors reported connected with modes [ 3.655374] [drm] Cannot find any crtc or sizes - going 1024x768 [ 3.681722] Console: switching to colour frame buffer device 128x48 [ 3.693506] drm drm: fb0: frame buffer device [ 3.720412] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 3.727905] usb3_vbus: supplied by vdd_5v_in [ 3.734007] utmi_phy_clk_enable: timeout waiting for phy to stabilize [ 3.740473] tegra-ehci 7d004000.usb: EHCI Host Controller [ 3.745889] tegra-ehci 7d004000.usb: new USB bus registered, assigned bus number 1 [ 3.753867] tegra-ehci 7d004000.usb: irq 343, io mem 0x7d004000 [ 3.770420] tegra-ehci 7d004000.usb: USB 2.0 started, EHCI 1.00 [ 3.778118] hub 1-0:1.0: USB hub found [ 3.781911] hub 1-0:1.0: 1 port detected [ 3.786704] tegra-ehci 7d008000.usb: EHCI Host Controller [ 3.792136] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 2 [ 3.799998] tegra-ehci 7d008000.usb: irq 344, io mem 0x7d008000 [ 3.820410] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.00 [ 3.827989] hub 2-0:1.0: USB hub found [ 3.831770] hub 2-0:1.0: 1 port detected [ 3.840054] tps65910-rtc tps65910-rtc: setting system clock to 2000-01-01 00:00:02 UTC (946684802) [ 3.859072] vdd_sata,avdd_plle: disabling [ 3.863553] usb1_vbus: disabling [ 3.866986] ALSA device list: [ 3.869945] #0: NVIDIA Tegra Beaver [ 3.874216] Waiting for root device /dev/mmcblk1p1... [ 4.150418] usb 2-1: new high-speed USB device number 2 using tegra-ehci [ 5.135881] asix 2-1:1.0 eth1: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 58:6d:8f:50:ba:18
[PYBOOT] [beaver 01:43]: Timed out waiting for "<type 'str'>":
[PYBOOT] [beaver 01:44]: got exception: timeout ~$off
[PYBOOT] [beaver 01:45]: Done. Board colombus-arm-multi_v7_nosmp_defconfig failure log: -------------------------------------------------
[ 40.938654] EXT4-fs (mmcblk0p1): re-mounted. Opts: (null) [....] Cleaning up temporary files... /tmp[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0c. [....] Activating lvm and md swap...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [....] Checking file systems...fsck from util-linux 2.20.1 [?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [....] Mounting local filesystems...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [....] Activating swapfile swap...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [....] Cleaning up temporary files...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0c. [....] Setting kernel variables ...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [ 81.697462] random: dd: uninitialized urandom read (512 bytes read, 51 bits of entropy available) [....] Configuring network interfaces...Internet Systems Consortium DHCP Client 4.2.2 Copyright 2004-2011 Internet Systems Consortium. All rights reserved. For info, please visit https://www.isc.org/software/dhcp/
[ 86.135056] eth0: device MAC address 16:0f:ea:fe:c9:f7 [ 86.290244] RX IPC Checksum Offload disabled [ 86.294744] No MAC Management Counters available Listening on LPF/eth0/16:0f:ea:fe:c9:f7 Sending on LPF/eth0/16:0f:ea:fe:c9:f7 Sending on Socket/fallback DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 3 DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 7 DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 11 DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 15 DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 9 DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 16 No DHCPOFFERS received. No working leases in persistent database - sleeping. [?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [....] Cleaning up temporary files...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0c. INIT: Entering runlevel: 2 [[36minfo[39;49m] Using makefile-style concurrent boot in runlevel 2.
[PYBOOT] [colombus 03:23]: Timed out waiting for "<type 'str'>":
[PYBOOT] [colombus 03:24]: got exception: timeout ~$off
[PYBOOT] [colombus 03:26]: Done. Board odroidu3-arm-exynos_defconfig failure log: -------------------------------------------------
[ 1.942851] usbhid: USB HID core driver [ 1.953889] NET: Registered protocol family 10 [ 1.954949] sit: IPv6 over IPv4 tunneling driver [ 1.958190] NET: Registered protocol family 17 [ 1.961748] NET: Registered protocol family 15 [ 1.966383] Registering SWP/SWPB emulation handler [ 1.972818] s3c-rtc 10070000.rtc: rtc disabled, re-enabling [ 1.976547] s3c-rtc 10070000.rtc: warning: invalid RTC value so initializing it [ 1.984099] s3c-rtc 10070000.rtc: rtc core: registered s3c as rtc1 [ 1.995030] mmc1: MAN_BKOPS_EN bit is not set [ 1.996348] mmc_host mmc1: Bus speed (slot 0) = 44000000Hz (slot req 52000000Hz, actual 44000000HZ div = 0) [ 2.004166] mmc_host mmc1: Bus speed (slot 0) = 73333333Hz (slot req 52000000Hz, actual 36666666HZ div = 1) [ 2.014072] mmc1: new DDR MMC card at address 0001 [ 2.018512] max98090 1-0010: MAX98090 REVID=0x43 [ 2.024135] mmcblk0: mmc1:0001 008G92 7.28 GiB [ 2.027848] mmcblk0boot0: mmc1:0001 008G92 partition 1 4.00 MiB [ 2.033932] usb 1-3: New USB device found, idVendor=0424, idProduct=3503 [ 2.040219] usb 1-3: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 2.047297] mmcblk0boot1: mmc1:0001 008G92 partition 2 4.00 MiB [ 2.047317] max98090 1-0010: use default 2.8v micbias [ 2.059244] hub 1-3:1.0: USB hub found [ 2.061946] mmcblk0rpmb: mmc1:0001 008G92 partition 3 512 KiB [ 2.067677] hub 1-3:1.0: 3 ports detected [ 2.073068] mmcblk0: p1 p2 [ 2.079548] asoc-simple-card sound: HiFi <-> 3830000.i2s mapping ok [ 2.084475] input: gpio_keys as /devices/platform/gpio_keys/input/input0 [ 2.112942] max77686-rtc max77686-rtc: setting system clock to 2000-01-01 01:00:19 UTC (946688419) [ 2.137001] VDD10_HDMI_1.0V: disabling [ 2.137798] vdd_g3d: disabling [ 2.138854] BUCK8_2.8V: disabling [ 2.142896] ALSA device list: [ 2.144387] #0: Odroid-U3 [ 2.148233] Waiting for root device /dev/mmcblk1p2...
[PYBOOT] [odroidu3 02:06]: Timed out waiting for "<type 'str'>":
[PYBOOT] [odroidu3 02:07]: got exception: timeout ~$off
[PYBOOT] [odroidu3 02:08]: Done. Board odroidu3-arm-multi_v7_defconfig failure log: -------------------------------------------------
[ 1.390517] dwmmc_exynos 12550000.mmc: No vqmmc regulator found [ 1.396424] dwmmc_exynos 12550000.mmc: allocated mmc-pwrseq [ 1.429639] dwmmc_exynos 12550000.mmc: 1 slots initialized [ 1.430154] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.436361] ledtrig-cpu: registered to indicate activity on CPUs [ 1.441226] usbcore: registered new interface driver usbhid [ 1.446657] usbhid: USB HID core driver [ 1.453104] NET: Registered protocol family 10 [ 1.455348] sit: IPv6 over IPv4 tunneling driver [ 1.459832] NET: Registered protocol family 17 [ 1.463917] can: controller area network core (rev 20120528 abi 9) [ 1.470110] NET: Registered protocol family 29 [ 1.474487] can: raw protocol (rev 20120528) [ 1.478750] can: broadcast manager protocol (rev 20120528 t) [ 1.484390] can: netlink gateway (rev 20130117) max_hops=1 [ 1.490090] Key type dns_resolver registered [ 1.494216] ThumbEE CPU extension supported. [ 1.498361] Registering SWP/SWPB emulation handler [ 1.505844] input: gpio_keys as /devices/platform/gpio_keys/input/input0 [ 1.535143] max77686-rtc max77686-rtc: setting system clock to 2000-01-01 01:00:21 UTC (946688421) [ 1.547591] VDD10_HDMI_1.0V: disabling [ 1.548267] vdd_g3d: disabling [ 1.549342] BUCK8_2.8V: disabling [ 1.554431] Waiting for root device /dev/mmcblk1p2... [ 1.557269] mmc1: MAN_BKOPS_EN bit is not set [ 1.562651] mmc_host mmc1: Bus speed (slot 0) = 44000000Hz (slot req 52000000Hz, actual 44000000HZ div = 0) [ 1.571295] mmc_host mmc1: Bus speed (slot 0) = 73333333Hz (slot req 52000000Hz, actual 36666666HZ div = 1) [ 1.581114] mmc1: new DDR MMC card at address 0001 [ 1.586018] mmcblk0: mmc1:0001 008G92 7.28 GiB [ 1.590276] mmcblk0boot0: mmc1:0001 008G92 partition 1 4.00 MiB [ 1.596182] mmcblk0boot1: mmc1:0001 008G92 partition 2 4.00 MiB [ 1.602065] mmcblk0rpmb: mmc1:0001 008G92 partition 3 512 KiB [ 1.608487] mmcblk0: p1 p2
[PYBOOT] [odroidu3 02:08]: Timed out waiting for "<type 'str'>":
[PYBOOT] [odroidu3 02:09]: got exception: timeout ~$off
[PYBOOT] [odroidu3 02:10]: Done. Board seaboard-arm-multi_v7_nosmp_defconfig failure log: -------------------------------------------------
[ 1.651035] vdd_ldo8,avdd_hdmi_pll: supplied by vdd_sm2,vin_ldo* [ 1.657417] vdd_ldo7,avdd_hdmi,vdd_fuse: supplied by vdd_sm2,vin_ldo* [ 1.667815] utmi_phy_clk_enable: timeout waiting for phy to stabilize [ 1.674280] tegra-ehci c5000000.usb: EHCI Host Controller [ 1.679693] tegra-ehci c5000000.usb: new USB bus registered, assigned bus number 3 [ 1.687435] tegra-ehci c5000000.usb: irq 287, io mem 0xc5000000 [ 1.699493] tegra-ehci c5000000.usb: USB 2.0 started, EHCI 1.00 [ 1.706060] hub 3-0:1.0: USB hub found [ 1.709854] hub 3-0:1.0: 1 port detected [ 1.717207] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 1.723819] [drm] No driver support for vblank timestamp query. [ 1.730647] mmc2: switch to bus width 2 failed [ 1.756886] mmc2: switch to bus width 1 failed [ 1.761341] mmc2: new high speed MMC card at address 0001 [ 1.774917] mmcblk0: mmc2:0001 MMC08G 7.46 GiB [ 1.775025] mmcblk0boot0: mmc2:0001 MMC08G partition 1 512 KiB [ 1.775164] mmcblk0boot1: mmc2:0001 MMC08G partition 2 512 KiB [ 1.776253] mmcblk0: p3 [ 1.809064] Console: switching to colour frame buffer device 170x48 [ 1.850345] drm drm: fb0: frame buffer device [ 1.854813] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 1.861280] input: gpio-keys as /devices/soc0/gpio-keys/input/input2 [ 1.868200] tps6586x-rtc tps6586x-rtc: setting system clock to 2009-01-01 00:00:00 UTC (1230768000) [ 1.880182] vdd_1v5: disabling [ 1.883242] vdd_1v2: disabling [ 1.914571] mmc0: queuing unknown CIS tuple 0x80 (50 bytes) [ 1.928032] mmc0: queuing unknown CIS tuple 0x80 (7 bytes) [ 1.936358] mmc0: queuing unknown CIS tuple 0x80 (7 bytes) [ 1.949091] mmc0: queuing unknown CIS tuple 0x80 (19 bytes) [ 1.973741] mmc0: queuing unknown CIS tuple 0x02 (1 bytes) [ 1.982503] mmc0: new SDIO card at address 0001 [ 2.520401] asix 2-1:1.0 eth0: register 'asix' at usb-c5008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, c0:c1:c0:13:08:60 [ 2.531701] Waiting for root device /dev/mmcblk2p3...
[PYBOOT] [seaboard 03:00]: Timed out waiting for "<type 'str'>":
[PYBOOT] [seaboard 03:01]: got exception: timeout ~$off
[PYBOOT] [seaboard 03:02]: Done. Board seaboard-arm-tegra_defconfig failure log: -------------------------------------------------
[ 1.805122] Bluetooth: BNEP socket layer initialized [ 1.810156] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 1.816184] Bluetooth: HIDP socket layer initialized [ 1.822117] Key type dns_resolver registered [ 1.827468] mmc0: queuing unknown CIS tuple 0x02 (1 bytes) [ 1.833694] Registering SWP/SWPB emulation handler [ 1.839711] mmc0: new SDIO card at address 0001 [ 1.864166] tegra-dc 54200000.dc: failed to probe RGB output: -517 [ 1.871121] VDDIO_HDMI: supplied by vdd_5v0 [ 1.875653] vdd_sys: supplied by vdd_5v0 [ 1.879698] vdd_sm2,vin_ldo*: supplied by vdd_sys [ 1.884757] vdd_ldo8,avdd_hdmi_pll: supplied by vdd_sm2,vin_ldo* [ 1.891621] vdd_ldo7,avdd_hdmi,vdd_fuse: supplied by vdd_sm2,vin_ldo* [ 1.903172] utmi_phy_clk_enable: timeout waiting for phy to stabilize [ 1.909654] tegra-ehci c5000000.usb: EHCI Host Controller [ 1.915160] tegra-ehci c5000000.usb: new USB bus registered, assigned bus number 3 [ 1.923378] tegra-ehci c5000000.usb: irq 287, io mem 0xc5000000 [ 1.940882] tegra-ehci c5000000.usb: USB 2.0 started, EHCI 1.00 [ 1.950581] hub 3-0:1.0: USB hub found [ 1.954687] hub 3-0:1.0: 1 port detected [ 1.964761] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 1.971395] [drm] No driver support for vblank timestamp query. [ 2.045787] Console: switching to colour frame buffer device 170x48 [ 2.064225] drm drm: fb0: frame buffer device [ 2.090840] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 2.097816] input: gpio-keys as /devices/soc0/gpio-keys/input/input4 [ 2.105270] tps6586x-rtc tps6586x-rtc: setting system clock to 2009-01-01 00:00:00 UTC (1230768000) [ 2.123332] vdd_1v5: disabling [ 2.126382] vdd_1v2: disabling [ 2.129539] ALSA device list: [ 2.132520] #0: NVIDIA Tegra Seaboard [ 2.392796] asix 2-1:1.0 eth0: register 'asix' at usb-c5008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, c0:c1:c0:13:08:60 [ 2.404282] Waiting for root device /dev/mmcblk2p3...
[PYBOOT] [seaboard 02:02]: Timed out waiting for "<type 'str'>":
[PYBOOT] [seaboard 02:03]: got exception: timeout ~$off
[PYBOOT] [seaboard 02:04]: Done. Board snowball-arm-multi_v7_defconfig failure log: -------------------------------------------------
[ 1.941650] mmcblk0boot1: mmc3:0001 partition 2 2.00 MiB [ 1.941802] mmcblk0rpmb: mmc3:0001 partition 3 128 KiB [ 1.958343] mmcblk0: p1 p2 p3 p4 [ 1.975585] NET: Registered protocol family 10 [ 1.980926] sit: IPv6 over IPv4 tunneling driver [ 1.986145] NET: Registered protocol family 17 [ 1.990631] can: controller area network core (rev 20120528 abi 9) [ 1.996887] NET: Registered protocol family 29 [ 2.001342] can: raw protocol (rev 20120528) [ 2.005615] can: broadcast manager protocol (rev 20120528 t) [ 2.011291] can: netlink gateway (rev 20130117) max_hops=1 [ 2.017272] Key type dns_resolver registered [ 2.021728] ThumbEE CPU extension supported. [ 2.026031] Registering SWP/SWPB emulation handler [ 2.033233] input: gpio_keys as /devices/soc0/gpio_keys/input/input0 [ 2.040008] rtc-pl031 80154000.rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800) [ 2.049163] thermal cooling_device0: thermal-cpufreq-0 bind to 0: 0-succeed [ 2.056182] thermal cooling_device0: thermal-cpufreq-0 bind to 1: 0-succeed [ 2.063171] thermal cooling_device0: thermal-cpufreq-0 bind to 2: 0-succeed [ 2.070159] db8500-cpufreq-cooling soc:cpufreq-cooling: Cooling device registered: thermal-cpufreq-0 [ 2.083770] db8500-esram12: disabling [ 2.087585] db8500-esram34: disabling [ 2.091491] V-CSI/DSI: disabling [ 2.094787] mmci-reg: disabling [ 2.098480] uart-pl011 80007000.uart: DMA channel TX dma0chan8 [ 2.104400] uart-pl011 80007000.uart: DMA channel RX dma0chan9 [ 2.110565] Waiting for root device /dev/mmcblk3p4... Connected. cu: Got hangup signal cu: waitpid: No child processes Connected.
Disconnected.
[PYBOOT] [snowball 02:33]: Timed out waiting for "<type 'str'>":
[PYBOOT] [snowball 02:34]: got exception: timeout ~$off
[PYBOOT] [snowball 02:35]: Done. Board snowball-arm-multi_v7_nosmp_defconfig failure log: -------------------------------------------------
[ 1.901733] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.909667] ledtrig-cpu: registered to indicate activity on CPUs [ 1.915924] usbcore: registered new interface driver usbhid [ 1.921508] usbhid: USB HID core driver [ 1.929351] NET: Registered protocol family 10 [ 1.987030] sit: IPv6 over IPv4 tunneling driver [ 1.992156] NET: Registered protocol family 17 [ 1.996643] can: controller area network core (rev 20120528 abi 9) [ 2.002868] NET: Registered protocol family 29 [ 2.007324] can: raw protocol (rev 20120528) [ 2.011596] can: broadcast manager protocol (rev 20120528 t) [ 2.017272] can: netlink gateway (rev 20130117) max_hops=1 [ 2.023193] Key type dns_resolver registered [ 2.027618] ThumbEE CPU extension supported. [ 2.084106] input: gpio_keys as /devices/soc0/gpio_keys/input/input0 [ 2.096832] rtc-pl031 80154000.rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800) [ 2.105926] thermal cooling_device0: thermal-cpufreq-0 bind to 0: 0-succeed [ 2.112945] thermal cooling_device0: thermal-cpufreq-0 bind to 1: 0-succeed [ 2.119934] thermal cooling_device0: thermal-cpufreq-0 bind to 2: 0-succeed [ 2.126892] db8500-cpufreq-cooling soc:cpufreq-cooling: Cooling device registered: thermal-cpufreq-0 [ 2.138824] db8500-esram12: disabling [ 2.191650] db8500-esram34: disabling [ 2.212371] V-CSI/DSI: disabling [ 2.221618] mmci-reg: disabling [ 2.225250] uart-pl011 80007000.uart: DMA channel TX dma0chan8 [ 2.231140] uart-pl011 80007000.uart: DMA channel RX dma0chan9 [ 2.252227] Waiting for root device /dev/mmcblk3p4... [ 4.117919] mmc3: new high speed MMC card at address 0001 [ 4.124053] mmcblk0: mmc3:0001 3.53 GiB [ 4.128417] mmcblk0boot0: mmc3:0001 partition 1 2.00 MiB [ 4.134063] mmcblk0boot1: mmc3:0001 partition 2 2.00 MiB [ 4.139709] mmcblk0rpmb: mmc3:0001 partition 3 128 KiB [ 4.146270] mmcblk0: p1 p2 p3 p4
[PYBOOT] [snowball 03:32]: Timed out waiting for "<type 'str'>":
[PYBOOT] [snowball 03:33]: got exception: timeout ~$off
[PYBOOT] [snowball 03:34]: Done. Board snowball-arm-u8500_defconfig failure log: -------------------------------------------------
[ 2.583312] coresight-etm3x 801ae000.ptm: PTM 1.0 initialized [ 2.589508] coresight-etm3x 801af000.ptm: PTM 1.0 initialized [ 2.602508] ux500-msp-i2s ux500-msp-i2s.1: Failed to get DMA channel capabilities, falling back to period counting: -6 [ 2.613250] snd-soc-mop500 snd-soc-mop500.0: ab8500-codec-dai.0 <-> ux500-msp-i2s.1 mapping ok [ 2.623199] ux500-msp-i2s ux500-msp-i2s.3: Failed to get DMA channel capabilities, falling back to period counting: -6 [ 2.633911] snd-soc-mop500 snd-soc-mop500.0: ab8500-codec-dai.1 <-> ux500-msp-i2s.3 mapping ok [ 2.657379] NET: Registered protocol family 10 [ 2.663574] sit: IPv6 over IPv4 tunneling driver [ 2.669708] NET: Registered protocol family 17 [ 2.674346] NET: Registered protocol family 35 [ 2.678955] NET: Registered protocol family 37 [ 2.683776] Registering SWP/SWPB emulation handler [ 2.690521] input: gpio_keys as /devices/soc0/gpio_keys/input/input1 [ 2.701721] ab8500-rtc ab8500-rtc.0: setting system clock to 2000-01-01 00:00:33 UTC (946684833) [ 2.710998] thermal cooling_device0: thermal-cpufreq-0 bind to 0: 0-succeed [ 2.718017] thermal cooling_device0: thermal-cpufreq-0 bind to 1: 0-succeed [ 2.725067] thermal cooling_device0: thermal-cpufreq-0 bind to 2: 0-succeed [ 2.732055] db8500-cpufreq-cooling soc:cpufreq-cooling: Cooling device registered: thermal-cpufreq-0 [ 2.746093] db8500-esram12: disabling [ 2.749847] db8500-esram34: disabling [ 2.753814] V-CSI/DSI: disabling [ 2.757080] mmci-reg: disabling [ 2.760375] ALSA device list: [ 2.763366] #0: MOP500-card [ 2.766693] uart-pl011 80007000.uart: DMA channel TX dma0chan12 [ 2.772644] uart-pl011 80007000.uart: DMA channel RX dma0chan13 [ 2.778808] Waiting for root device /dev/mmcblk3p4... Connected. cu: Got hangup signal cu: waitpid: No child processes Connected.
Disconnected.
[PYBOOT] [snowball 02:08]: Timed out waiting for "<type 'str'>":
[PYBOOT] [snowball 02:09]: got exception: timeout ~$off
[PYBOOT] [snowball 02:10]: Done.
kernel-build-reports@lists.linaro.org
-
Olof's autobooter