queue boot: 34 pass, 10 fail (v3.13.9) - Kernel-build-reports

4 Apr 2014


      Automated DT boot report for various ARM defconfigs.
Tree/Branch: queue
Git describe: v3.13.9
Failed boot tests (console logs at the end)
===========================================
                  omap5-uevm:     FAIL:    omap2plus_defconfig
                  omap5-uevm:     FAIL:    multi_lpae_defconfig
  imx6dl-wandboard,wand-dual:     FAIL:    imx_v6_v7_defconfig
  imx6dl-wandboard,wand-solo:     FAIL:    imx_v6_v7_defconfig
             imx6q-wandboard:     FAIL:    imx_v6_v7_defconfig
  imx6dl-wandboard,wand-solo:     FAIL:    multi_v7_defconfig
                  omap5-uevm:     FAIL:    multi_v7_defconfig
             imx6q-wandboard:  OFFLINE:    multi_v7_defconfig
  imx6dl-wandboard,wand-dual:     FAIL:    multi_v7_defconfig
                   da850-evm:     FAIL:    davinci_all_defconfig
Full Report
===========
da8xx_omapl_defconfig
---------------------
                   da850-evm     0 min 15.3 sec:     PASS  (Warnings: 1)
             legacy,da850evm     0 min 14.4 sec:     PASS  (Warnings: 1)
omap2plus_defconfig
-------------------
               legacy,3730xm     0 min 55.2 sec:     PASS
            am335x-boneblack     0 min 25.5 sec:     PASS
             omap3-beagle-xm     0 min 56.8 sec:     PASS
           legacy,3530beagle     0 min 35.0 sec:     PASS  (Warnings: 1)
                 omap4-panda     1 min  6.6 sec:     PASS
                  omap3-tobi     0 min 22.5 sec:     PASS  (Warnings: 1)
                 am335x-bone     0 min 27.3 sec:     PASS
                  omap5-uevm     1 min 17.7 sec:     FAIL
              omap4-panda-es     1 min  6.8 sec:     PASS
            legacy,3730storm     0 min 23.9 sec:     PASS
            legacy,3530overo     0 min 21.3 sec:     PASS  (Warnings: 1)
multi_lpae_defconfig
--------------------
                  omap5-uevm     1 min 19.0 sec:     FAIL
       sun7i-a20-cubieboard2     0 min 13.8 sec:     PASS
tegra_defconfig
---------------
              tegra30-beaver     0 min 17.0 sec:     PASS
imx_v6_v7_defconfig
-------------------
  imx6dl-wandboard,wand-dual     0 min 42.8 sec:     FAIL
  imx6dl-wandboard,wand-solo     0 min 42.9 sec:     FAIL
             imx6q-wandboard     0 min 40.9 sec:     FAIL
sunxi_defconfig
---------------
       sun7i-a20-cubieboard2     0 min 12.5 sec:     PASS
        sun4i-a10-cubieboard     0 min 12.6 sec:     PASS
bcm_defconfig
-------------
                 bcm28155-ap     0 min 23.0 sec:     PASS
exynos_defconfig
----------------
          exynos5250-arndale     0 min 30.5 sec:     PASS
multi_v7_defconfig
------------------
              tegra30-beaver     0 min 14.4 sec:     PASS
            am335x-boneblack     0 min 22.5 sec:     PASS
             omap3-beagle-xm     1 min  0.9 sec:     PASS
       sun7i-a20-cubieboard2     0 min 13.6 sec:     PASS
          armada-370-mirabox     0 min 20.6 sec:     PASS
                 omap4-panda     1 min 11.7 sec:     PASS
  armada-xp-openblocks-ax3-4     0 min 22.6 sec:     PASS
        sun4i-a10-cubieboard     0 min 21.2 sec:     PASS
                 bcm28155-ap     0 min 26.5 sec:     PASS
  imx6dl-wandboard,wand-solo     0 min 42.1 sec:     FAIL
                  omap3-tobi     0 min 23.7 sec:     PASS  (Warnings: 1)
                 am335x-bone     0 min 23.9 sec:     PASS
                  omap5-uevm     1 min 18.2 sec:     FAIL
             imx6q-wandboard     0 min 31.4 sec:  OFFLINE
              omap4-panda-es     1 min  1.1 sec:     PASS
  imx6dl-wandboard,wand-dual     0 min 42.2 sec:     FAIL
sama5_defconfig
---------------
                  sama5d35ek     0 min 17.3 sec:     PASS
davinci_all_defconfig
---------------------
             legacy,dm365evm     0 min 16.4 sec:     PASS
                   da850-evm     0 min 40.7 sec:     FAIL
mvebu_defconfig
---------------
  armada-xp-openblocks-ax3-4     0 min 22.0 sec:     PASS
          armada-370-mirabox     0 min 20.0 sec:     PASS
Console logs for failures
=========================
omap2plus_defconfig
-------------------
omap5-uevm: FAIL: last 80 lines of boot log:
    --------------------------------------------
(Re)start USB...
USB0:   USB EHCI 1.00
scanning bus 0 for devices... found: 002/102 2
3 USB Device(s) found
       scanning usb for storage devices... 0 Storage Device(s) found
       scanning usb for ethernet devices... 1 Ethernet Device(s) found
U-Boot# setenv autoload no; setenv autoboot no
setenv autoload no; setenv autoboot no
U-Boot# dhcp
dhcp
Waiting for Ethernet connection... done.
BOOTP broadcast 1
EHCI timed out on TD - token=0x88008d80
BOOTP broadcast 2
DHCP client bound to address 192.168.1.200
U-Boot# setenv serverip 192.168.1.2
setenv serverip 192.168.1.2
U-Boot# if test -n ${netargs}; then run netargs; fi
if test -n ${netargs}; then run netargs; fi
U-Boot# tftp 0x82000000 192.168.1.2:tmp/omap5uevm-TTfWml/zImage
tftp 0x82000000 192.168.1.2:tmp/omap5uevm-TTfWml/zImage
Waiting for Ethernet connection... done.
Using sms0 device
TFTP from server 192.168.1.2; our IP address is 192.168.1.200
Filename 'tmp/omap5uevm-TTfWml/zImage'.
Load address: 0x82000000
Loading: *EHCI timed out on TD - token=0x8008d80
T #################################################################
     #################################################################
     #################################################################
     #################################################################
     ##############################
     417 KiB/s
done
Bytes transferred = 4242976 (40be20 hex)
U-Boot# tftp 0x81000000 192.168.1.2:buildroot.cpio.gz.uboot
tftp 0x81000000 192.168.1.2:buildroot.cpio.gz.uboot
Waiting for Ethernet connection... done.
Using sms0 device
TFTP from server 192.168.1.2; our IP address is 192.168.1.200
Filename 'buildroot.cpio.gz.uboot'.
Load address: 0x81000000
Loading: *T ############################################
     86.9 KiB/s
done
Bytes transferred = 642602 (9ce2a hex)
U-Boot# tftp 0x80f80000 192.168.1.2:tmp/omap5uevm-TTfWml/omap5-uevm.dtb
tftp 0x80f80000 192.168.1.2:tmp/omap5uevm-TTfWml/omap5-uevm.dtb
Waiting for Ethernet connection... done.
Using sms0 device
TFTP from server 192.168.1.2; our IP address is 192.168.1.200
Filename 'tmp/omap5uevm-TTfWml/omap5-uevm.dtb'.
Load address: 0x80f80000
Loading: *T ##
     2.9 KiB/s
done
Bytes transferred = 18174 (46fe hex)
U-Boot# printenv bootargs
printenv bootargs
bootargs=console=ttyO2,115200n8 debug earlyprintk ip=192.168.1.200:192.168.1.2:192.168.1.254:255.255.255.0:::none:192.168.1.254
U-Boot# bootz 0x82000000 0x81000000 0x80f80000
bootz 0x82000000 0x81000000 0x80f80000
Kernel image @ 0x82000000 [ 0x000000 - 0x40be20 ]
## Loading init Ramdisk from Legacy Image at 81000000 ...
   Image Name:   
   Image Type:   ARM Linux RAMDisk Image (uncompressed)
   Data Size:    642538 Bytes = 627.5 KiB
   Load Address: 00000000
   Entry Point:  00000000
   Verifying Checksum ... OK
## Flattened Device Tree blob at 80f80000
   Booting using the fdt blob at 0x80f80000
   Using Device Tree in place at 80f80000, end 80f876fd
Starting kernel ...
~$off
# PYBOOT: Exception: kernel: ERROR: did not start booting.
# PYBOOT: Time: 77.69 seconds.
# PYBOOT: Result: FAIL
multi_lpae_defconfig
--------------------
omap5-uevm: FAIL: last 80 lines of boot log:
    --------------------------------------------
(Re)start USB...
USB0:   USB EHCI 1.00
scanning bus 0 for devices... found: 002/102 2
3 USB Device(s) found
       scanning usb for storage devices... 0 Storage Device(s) found
       scanning usb for ethernet devices... 1 Ethernet Device(s) found
U-Boot# setenv autoload no; setenv autoboot no
setenv autoload no; setenv autoboot no
U-Boot# dhcp
dhcp
Waiting for Ethernet connection... done.
BOOTP broadcast 1
EHCI timed out on TD - token=0x88008d80
BOOTP broadcast 2
DHCP client bound to address 192.168.1.200
U-Boot# setenv serverip 192.168.1.2
setenv serverip 192.168.1.2
U-Boot# if test -n ${netargs}; then run netargs; fi
if test -n ${netargs}; then run netargs; fi
U-Boot# tftp 0x82000000 192.168.1.2:tmp/omap5uevm-J5rkI9/zImage
tftp 0x82000000 192.168.1.2:tmp/omap5uevm-J5rkI9/zImage
Waiting for Ethernet connection... done.
Using sms0 device
TFTP from server 192.168.1.2; our IP address is 192.168.1.200
Filename 'tmp/omap5uevm-J5rkI9/zImage'.
Load address: 0x82000000
Loading: *EHCI timed out on TD - token=0x8008d80
T #################################################################
     #################################################################
     #################################################################
     #######################################################
     369.1 KiB/s
done
Bytes transferred = 3667648 (37f6c0 hex)
U-Boot# tftp 0x81000000 192.168.1.2:buildroot.cpio.gz.uboot
tftp 0x81000000 192.168.1.2:buildroot.cpio.gz.uboot
Waiting for Ethernet connection... done.
Using sms0 device
TFTP from server 192.168.1.2; our IP address is 192.168.1.200
Filename 'buildroot.cpio.gz.uboot'.
Load address: 0x81000000
Loading: *EHCI timed out on TD - token=0x8008d80
T ############################################
     118.2 KiB/s
done
Bytes transferred = 642602 (9ce2a hex)
U-Boot# tftp 0x80f80000 192.168.1.2:tmp/omap5uevm-J5rkI9/omap5-uevm.dtb
tftp 0x80f80000 192.168.1.2:tmp/omap5uevm-J5rkI9/omap5-uevm.dtb
Waiting for Ethernet connection... done.
Using sms0 device
TFTP from server 192.168.1.2; our IP address is 192.168.1.200
Filename 'tmp/omap5uevm-J5rkI9/omap5-uevm.dtb'.
Load address: 0x80f80000
Loading: *T ##
     2 KiB/s
done
Bytes transferred = 18174 (46fe hex)
U-Boot# printenv bootargs
printenv bootargs
bootargs=console=ttyO2,115200n8 debug earlyprintk ip=192.168.1.200:192.168.1.2:192.168.1.254:255.255.255.0:::none:192.168.1.254
U-Boot# bootz 0x82000000 0x81000000 0x80f80000
bootz 0x82000000 0x81000000 0x80f80000
Kernel image @ 0x82000000 [ 0x000000 - 0x37f6c0 ]
## Loading init Ramdisk from Legacy Image at 81000000 ...
   Image Name:   
   Image Type:   ARM Linux RAMDisk Image (uncompressed)
   Data Size:    642538 Bytes = 627.5 KiB
   Load Address: 00000000
   Entry Point:  00000000
   Verifying Checksum ... OK
## Flattened Device Tree blob at 80f80000
   Booting using the fdt blob at 0x80f80000
   Using Device Tree in place at 80f80000, end 80f876fd
Starting kernel ...
~$off
# PYBOOT: Exception: kernel: ERROR: did not start booting.
# PYBOOT: Time: 78.99 seconds.
# PYBOOT: Result: FAIL
imx_v6_v7_defconfig
-------------------
imx6dl-wandboard,wand-dual: FAIL: last 80 lines of boot log:
    ------------------------------------------------------------
version
U-Boot 2013.04-00012-g0b44183 (May 15 2013 - 16:00:22)
arm-none-linux-gnueabi-gcc (Sourcery G++ Lite 2010.09-50) 4.5.1
GNU ld (Sourcery G++ Lite 2010.09-50) 2.20.51.20100809
=> setenv bootargs console=ttymxc0,115200 rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4
setenv bootargs console=ttymxc0,115200 rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4
=> setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:::none:192.168.1.254'
setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:::none:192.168.1.254'
=> if test -n ${initenv}; then run initenv; fi
if test -n ${initenv}; then run initenv; fi
=> if test -n ${preboot}; then run preboot; fi
if test -n ${preboot}; then run preboot; fi
=> setenv autoload no; setenv autoboot no
setenv autoload no; setenv autoboot no
=> dhcp
dhcp
FEC Waiting for PHY auto negotiation to complete.. done
BOOTP broadcast 1
DHCP client bound to address 192.168.1.156
=> setenv serverip 192.168.1.2
setenv serverip 192.168.1.2
=> if test -n ${netargs}; then run netargs; fi
if test -n ${netargs}; then run netargs; fi
=> tftp 0x18000000 192.168.1.2:tmp/wand-dual-VBFXET/zImage
tftp 0x18000000 192.168.1.2:tmp/wand-dual-VBFXET/zImage
Using FEC device
TFTP from server 192.168.1.2; our IP address is 192.168.1.156
Filename 'tmp/wand-dual-VBFXET/zImage'.
Load address: 0x18000000
Loading: *#################################################################
     #################################################################
     #################################################################
     #################################################################
     #################################################################
     #############
     1.5 MiB/s
done
Bytes transferred = 4961208 (4bb3b8 hex)
=> tftp 0x20000000 192.168.1.2:buildroot.cpio.gz.uboot
tftp 0x20000000 192.168.1.2:buildroot.cpio.gz.uboot
Using FEC device
TFTP from server 192.168.1.2; our IP address is 192.168.1.156
Filename 'buildroot.cpio.gz.uboot'.
Load address: 0x20000000
Loading: *############################################
     1.5 MiB/s
done
Bytes transferred = 642602 (9ce2a hex)
=> tftp 0x1f000000 192.168.1.2:tmp/wand-dual-VBFXET/imx6dl-wandboard.dtb
tftp 0x1f000000 192.168.1.2:tmp/wand-dual-VBFXET/imx6dl-wandboard.dtb
Using FEC device
TFTP from server 192.168.1.2; our IP address is 192.168.1.156
Filename 'tmp/wand-dual-VBFXET/imx6dl-wandboard.dtb'.
Load address: 0x1f000000
Loading: *###
     1.4 MiB/s
done
Bytes transferred = 32741 (7fe5 hex)
=> printenv bootargs
printenv bootargs
bootargs=console=ttymxc0,115200 rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 ip=192.168.1.156:192.168.1.2:192.168.1.254:255.255.255.0:::none:192.168.1.254
=> bootz 0x18000000 0x20000000 0x1f000000
bootz 0x18000000 0x20000000 0x1f000000
## Loading init Ramdisk from Legacy Image at 20000000 ...
   Image Name:   
   Image Type:   ARM Linux RAMDisk Image (uncompressed)
   Data Size:    642538 Bytes = 627.5 KiB
   Load Address: 00000000
   Entry Point:  00000000
## Flattened Device Tree blob at 1f000000
   Booting using the fdt blob at 0x1f000000
   Using Device Tree in place at 1f000000, end 1f00afe4
Starting kernel ...
~$off
# PYBOOT: Exception: kernel: ERROR: did not start booting.
# PYBOOT: Time: 42.75 seconds.
# PYBOOT: Result: FAIL
imx6dl-wandboard,wand-solo: FAIL: last 80 lines of boot log:
    ------------------------------------------------------------
version
U-Boot 2013.04-00012-g0b44183-dirty (May 15 2013 - 16:16:11)
arm-none-linux-gnueabi-gcc (Sourcery G++ Lite 2010.09-50) 4.5.1
GNU ld (Sourcery G++ Lite 2010.09-50) 2.20.51.20100809
=> setenv bootargs console=ttymxc0,115200 rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4
setenv bootargs console=ttymxc0,115200 rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4
=> setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:::none:192.168.1.254'
setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:::none:192.168.1.254'
=> if test -n ${initenv}; then run initenv; fi
if test -n ${initenv}; then run initenv; fi
=> if test -n ${preboot}; then run preboot; fi
if test -n ${preboot}; then run preboot; fi
=> setenv autoload no; setenv autoboot no
setenv autoload no; setenv autoboot no
=>dhcp
 dhcp
FEC Waiting for PHY auto negotiation to complete.. done
BOOTP broadcast 1
DHCP client bound to address 192.168.1.164
=> setenv serverip 192.168.1.2
setenv serverip 192.168.1.2
=> if test -n ${netargs}; then run netargs; fi
if test -n ${netargs}; then run netargs; fi
=> tftp 0x18000000 192.168.1.2:tmp/wand-solo-GTBLxv/zImage
tftp 0x18000000 192.168.1.2:tmp/wand-solo-GTBLxv/zImage
Using FEC device
TFTP from server 192.168.1.2; our IP address is 192.168.1.164
Filename 'tmp/wand-solo-GTBLxv/zImage'.
Load address: 0x18000000
Loading: *#################################################################
     #################################################################
     #################################################################
     #################################################################
     #################################################################
     #############
     1.5 MiB/s
done
Bytes transferred = 4961208 (4bb3b8 hex)
=> tftp 0x20000000 192.168.1.2:buildroot.cpio.gz.uboot
tftp 0x20000000 192.168.1.2:buildroot.cpio.gz.uboot
Using FEC device
TFTP from server 192.168.1.2; our IP address is 192.168.1.164
Filename 'buildroot.cpio.gz.uboot'.
Load address: 0x20000000
Loading: *############################################
     1.5 MiB/s
done
Bytes transferred = 642602 (9ce2a hex)
=> tftp 0x1f000000 192.168.1.2:tmp/wand-solo-GTBLxv/imx6dl-wandboard.dtb
tftp 0x1f000000 192.168.1.2:tmp/wand-solo-GTBLxv/imx6dl-wandboard.dtb
Using FEC device
TFTP from server 192.168.1.2; our IP address is 192.168.1.164
Filename 'tmp/wand-solo-GTBLxv/imx6dl-wandboard.dtb'.
Load address: 0x1f000000
Loading: *###
     1.4 MiB/s
done
Bytes transferred = 32741 (7fe5 hex)
=> printenv bootargs
printenv bootargs
bootargs=console=ttymxc0,115200 rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 ip=192.168.1.164:192.168.1.2:192.168.1.254:255.255.255.0:::none:192.168.1.254
=> bootz 0x18000000 0x20000000 0x1f000000
bootz 0x18000000 0x20000000 0x1f000000
## Loading init Ramdisk from Legacy Image at 20000000 ...
   Image Name:   
   Image Type:   ARM Linux RAMDisk Image (uncompressed)
   Data Size:    642538 Bytes = 627.5 KiB
   Load Address: 00000000
   Entry Point:  00000000
## Flattened Device Tree blob at 1f000000
   Booting using the fdt blob at 0x1f000000
   Using Device Tree in place at 1f000000, end 1f00afe4
Starting kernel ...
~$off
# PYBOOT: Exception: kernel: ERROR: did not start booting.
# PYBOOT: Time: 42.90 seconds.
# PYBOOT: Result: FAIL
imx6q-wandboard: FAIL: last 80 lines of boot log:
    -------------------------------------------------
U-Boot 2013.07-00001-gc362749 (Sep 06 2013 - 07:50:29)
arm-linux-gnueabi-gcc (Ubuntu/Linaro 4.7.2-1ubuntu1) 4.7.2
GNU ld (GNU Binutils for Ubuntu) 2.22.90.20120919
=> setenv bootargs console=ttymxc0,115200
setenv bootargs console=ttymxc0,115200
=> setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:::none:192.168.1.254'
setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:::none:192.168.1.254'
=> if test -n ${initenv}; then run initenv; fi
if test -n ${initenv}; then run initenv; fi
=> if test -n ${preboot}; then run preboot; fi
if test -n ${preboot}; then run preboot; fi
=> setenv autoload no; setenv autoboot no
setenv autoload no; setenv autoboot no
=> dhcp
dhcp
FEC Waiting for PHY auto negotiation to complete.. done
BOOTP broadcast 1
DHCP client bound to address 192.168.1.163
=> setenv serverip 192.168.1.2
setenv serverip 192.168.1.2
=> if test -n ${netargs}; then run netargs; fi
if test -n ${netargs}; then run netargs; fi
=> tftp 0x18000000 192.168.1.2:tmp/wand-quad-roRbqK/zImage
tftp 0x18000000 192.168.1.2:tmp/wand-quad-roRbqK/zImage
Using FEC device
TFTP from server 192.168.1.2; our IP address is 192.168.1.163
Filename 'tmp/wand-quad-roRbqK/zImage'.
Load address: 0x18000000
Loading: *#################################################################
     #################################################################
     #################################################################
     #################################################################
     #################################################################
     #############
     2.7 MiB/s
done
Bytes transferred = 4961208 (4bb3b8 hex)
=>tftp 0x20000000 192.168.1.2:buildroot.cpio.gz.uboot
 tftp 0x20000000 192.168.1.2:buildroot.cpio.gz.uboot
Using FEC device
TFTP from server 192.168.1.2; our IP address is 192.168.1.163
Filename 'buildroot.cpio.gz.uboot'.
Load address: 0x20000000
Loading: *############################################
     2.7 MiB/s
done
Bytes transferred = 642602 (9ce2a hex)
=> tftp 0x1f000000 192.168.1.2:tmp/wand-quad-roRbqK/imx6q-wandboard.dtb
tftp 0x1f000000 192.168.1.2:tmp/wand-quad-roRbqK/imx6q-wandboard.dtb
Using FEC device
TFTP from server 192.168.1.2; our IP address is 192.168.1.163
Filename 'tmp/wand-quad-roRbqK/imx6q-wandboard.dtb'.
Load address: 0x1f000000
Loading: *###
     2.5 MiB/s
done
Bytes transferred = 34380 (864c hex)
=> printenv bootargs
printenv bootargs
bootargs=console=ttymxc0,115200 ip=192.168.1.163:192.168.1.2::255.255.255.0:::none:192.168.1.254
=> bootz 0x18000000 0x20000000 0x1f000000
bootz 0x18000000 0x20000000 0x1f000000
Kernel image @ 0x18000000 [ 0x000000 - 0x4bb3b8 ]
## Loading init Ramdisk from Legacy Image at 20000000 ...
   Image Name:   
   Image Type:   ARM Linux RAMDisk Image (uncompressed)
   Data Size:    642538 Bytes = 627.5 KiB
   Load Address: 00000000
   Entry Point:  00000000
   Verifying Checksum ... OK
## Flattened Device Tree blob at 1f000000
   Booting using the fdt blob at 0x1f000000
   Using Device Tree in place at 1f000000, end 1f00b64b
Starting kernel ...
~$off
# PYBOOT: Exception: kernel: ERROR: did not start booting.
# PYBOOT: Time: 40.94 seconds.
# PYBOOT: Result: FAIL
multi_v7_defconfig
------------------
imx6dl-wandboard,wand-solo: FAIL: last 80 lines of boot log:
    ------------------------------------------------------------
=> 
=> version
version
U-Boot 2013.04-00012-g0b44183-dirty (May 15 2013 - 16:16:11)
arm-none-linux-gnueabi-gcc (Sourcery G++ Lite 2010.09-50) 4.5.1
GNU ld (Sourcery G++ Lite 2010.09-50) 2.20.51.20100809
=> setenv bootargs console=ttymxc0,115200 rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4
setenv bootargs console=ttymxc0,115200 rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4
=> setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:::none:192.168.1.254'
setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:::none:192.168.1.254'
=> if test -n ${initenv}; then run initenv; fi
if test -n ${initenv}; then run initenv; fi
=> if test -n ${preboot}; then run preboot; fi
if test -n ${preboot}; then run preboot; fi
=> setenv autoload no; setenv autoboot no
setenv autoload no; setenv autoboot no
=> dhcp
dhcp
FEC Waiting for PHY auto negotiation to complete.. done
BOOTP broadcast 1
DHCP client bound to address 192.168.1.164
=> setenv serverip 192.168.1.2
setenv serverip 192.168.1.2
=> if test -n ${netargs}; then run netargs; fi
if test -n ${netargs}; then run netargs; fi
=> tftp 0x18000000 192.168.1.2:tmp/wand-solo-NC1Ftw/zImage
tftp 0x18000000 192.168.1.2:tmp/wand-solo-NC1Ftw/zImage
Using FEC device
TFTP from server 192.168.1.2; our IP address is 192.168.1.164
Filename 'tmp/wand-solo-NC1Ftw/zImage'.
Load address: 0x18000000
Loading: *#################################################################
     #################################################################
     #################################################################
     ######################################################
     1.5 MiB/s
done
Bytes transferred = 3646496 (37a420 hex)
=> tftp 0x20000000 192.168.1.2:buildroot.cpio.gz.uboot
tftp 0x20000000 192.168.1.2:buildroot.cpio.gz.uboot
Using FEC device
TFTP from server 192.168.1.2; our IP address is 192.168.1.164
Filename 'buildroot.cpio.gz.uboot'.
Load address: 0x20000000
Loading: *############################################
     1.5 MiB/s
done
Bytes transferred = 642602 (9ce2a hex)
=> tftp 0x1f000000 192.168.1.2:tmp/wand-solo-NC1Ftw/imx6dl-wandboard.dtb
tftp 0x1f000000 192.168.1.2:tmp/wand-solo-NC1Ftw/imx6dl-wandboard.dtb
Using FEC device
TFTP from server 192.168.1.2; our IP address is 192.168.1.164
Filename 'tmp/wand-solo-NC1Ftw/imx6dl-wandboard.dtb'.
Load address: 0x1f000000
Loading: *###
     1.4 MiB/s
done
Bytes transferred = 32741 (7fe5 hex)
=> printenv bootargs
printenv bootargs
bootargs=console=ttymxc0,115200 rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 ip=192.168.1.164:192.168.1.2:192.168.1.254:255.255.255.0:::none:192.168.1.254
=> bootz 0x18000000 0x20000000 0x1f000000
bootz 0x18000000 0x20000000 0x1f000000
## Loading init Ramdisk from Legacy Image at 20000000 ...
   Image Name:   
   Image Type:   ARM Linux RAMDisk Image (uncompressed)
   Data Size:    642538 Bytes = 627.5 KiB
   Load Address: 00000000
   Entry Point:  00000000
## Flattened Device Tree blob at 1f000000
   Booting using the fdt blob at 0x1f000000
   Using Device Tree in place at 1f000000, end 1f00afe4
Starting kernel ...
~$off
# PYBOOT: Exception: kernel: ERROR: did not start booting.
# PYBOOT: Time: 42.11 seconds.
# PYBOOT: Result: FAIL
omap5-uevm: FAIL: last 80 lines of boot log:
    --------------------------------------------
if test -n ${preboot}; then run preboot; fi
(Re)start USB...
USB0:   USB EHCI 1.00
scanning bus 0 for devices... found: 002/102 2
3 USB Device(s) found
       scanning usb for storage devices... 0 Storage Device(s) found
       scanning usb for ethernet devices... 1 Ethernet Device(s) found
U-Boot# setenv autoload no; setenv autoboot no
setenv autoload no; setenv autoboot no
U-Boot# dhcp
dhcp
Waiting for Ethernet connection... done.
BOOTP broadcast 1
EHCI timed out on TD - token=0x8008d80
BOOTP broadcast 2
DHCP client bound to address 192.168.1.200
U-Boot#setenv serverip 192.168.1.2
 setenv serverip 192.168.1.2
U-Boot# if test -n ${netargs}; then run netargs; fi
if test -n ${netargs}; then run netargs; fi
U-Boot# tftp 0x82000000 192.168.1.2:tmp/omap5uevm-hymILI/zImage
tftp 0x82000000 192.168.1.2:tmp/omap5uevm-hymILI/zImage
Waiting for Ethernet connection... done.
Using sms0 device
TFTP from server 192.168.1.2; our IP address is 192.168.1.200
Filename 'tmp/omap5uevm-hymILI/zImage'.
Load address: 0x82000000
Loading: *EHCI timed out on TD - token=0x88008d80
T #################################################################
     #################################################################
     #################################################################
     ######################################################
     368.2 KiB/s
done
Bytes transferred = 3646496 (37a420 hex)
U-Boot# tftp 0x81000000 192.168.1.2:buildroot.cpio.gz.uboot
tftp 0x81000000 192.168.1.2:buildroot.cpio.gz.uboot
Waiting for Ethernet connection... done.
Using sms0 device
TFTP from server 192.168.1.2; our IP address is 192.168.1.200
Filename 'buildroot.cpio.gz.uboot'.
Load address: 0x81000000
Loading: *T ############################################
     93.8 KiB/s
done
Bytes transferred = 642602 (9ce2a hex)
U-Boot# tftp 0x80f80000 192.168.1.2:tmp/omap5uevm-hymILI/omap5-uevm.dtb
tftp 0x80f80000 192.168.1.2:tmp/omap5uevm-hymILI/omap5-uevm.dtb
Waiting for Ethernet connection... done.
Using sms0 device
TFTP from server 192.168.1.2; our IP address is 192.168.1.200
Filename 'tmp/omap5uevm-hymILI/omap5-uevm.dtb'.
Load address: 0x80f80000
Loading: *T ##
     2 KiB/s
done
Bytes transferred = 18174 (46fe hex)
U-Boot# printenv bootargs
printenv bootargs
bootargs=console=ttyO2,115200n8 debug earlyprintk ip=192.168.1.200:192.168.1.2:192.168.1.254:255.255.255.0:::none:192.168.1.254
U-Boot# bootz 0x82000000 0x81000000 0x80f80000
bootz 0x82000000 0x81000000 0x80f80000
Kernel image @ 0x82000000 [ 0x000000 - 0x37a420 ]
## Loading init Ramdisk from Legacy Image at 81000000 ...
   Image Name:   
   Image Type:   ARM Linux RAMDisk Image (uncompressed)
   Data Size:    642538 Bytes = 627.5 KiB
   Load Address: 00000000
   Entry Point:  00000000
   Verifying Checksum ... OK
## Flattened Device Tree blob at 80f80000
   Booting using the fdt blob at 0x80f80000
   Using Device Tree in place at 80f80000, end 80f876fd
Starting kernel ...
~$off
# PYBOOT: Exception: kernel: ERROR: did not start booting.
# PYBOOT: Time: 78.17 seconds.
# PYBOOT: Result: FAIL
imx6q-wandboard: OFFLINE: last 80 lines of boot log:
    ----------------------------------------------------
Connected to wand-quad console [channel connected] (~$quit to exit)
(user:khilman) is already connected
~$hardreset
Command(wand-quad console)> hardreset
(user:khilman) Reboot wand-quad
Reboot: wand-quad ; phidget 2 3 :  off, sleep, on
U-Boot 2013.07-00001-gc362749 (Sep 06 2013 - 07:50:29)
CPU:   Freescale i.MX6Q rev1.2 at 792 MHz
Reset cause: POR
Board: Wandboard
DRAM:  2 GiB
MMC:   FSL_SDHC: 0, FSL_SDHC: 1
*** Warning - bad CRC, using default environment
In:    serial
  0 
=> ~$off
# PYBOOT: Exception: ('ERROR: Could not break into u-boot.', 'OFFLINE')
# PYBOOT: Time: 31.38 seconds.
# PYBOOT: Result: OFFLINE
imx6dl-wandboard,wand-dual: FAIL: last 80 lines of boot log:
    ------------------------------------------------------------
=> 
=> version
version
U-Boot 2013.04-00012-g0b44183 (May 15 2013 - 16:00:22)
arm-none-linux-gnueabi-gcc (Sourcery G++ Lite 2010.09-50) 4.5.1
GNU ld (Sourcery G++ Lite 2010.09-50) 2.20.51.20100809
=> setenv bootargs console=ttymxc0,115200 rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4
setenv bootargs console=ttymxc0,115200 rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4
=> setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:::none:192.168.1.254'
setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:::none:192.168.1.254'
=> if test -n ${initenv}; then run initenv; fi
if test -n ${initenv}; then run initenv; fi
=> if test -n ${preboot}; then run preboot; fi
if test -n ${preboot}; then run preboot; fi
=> setenv autoload no; setenv autoboot no
setenv autoload no; setenv autoboot no
=> dhcp
dhcp
FEC Waiting for PHY auto negotiation to complete.. done
BOOTP broadcast 1
DHCP client bound to address 192.168.1.156
=> setenv serverip 192.168.1.2
setenv serverip 192.168.1.2
=> if test -n ${netargs}; then run netargs; fi
if test -n ${netargs}; then run netargs; fi
=> tftp 0x18000000 192.168.1.2:tmp/wand-dual-hydvF4/zImage
tftp 0x18000000 192.168.1.2:tmp/wand-dual-hydvF4/zImage
Using FEC device
TFTP from server 192.168.1.2; our IP address is 192.168.1.156
Filename 'tmp/wand-dual-hydvF4/zImage'.
Load address: 0x18000000
Loading: *#################################################################
     #################################################################
     #################################################################
     ######################################################
     1.5 MiB/s
done
Bytes transferred = 3646496 (37a420 hex)
=> tftp 0x20000000 192.168.1.2:buildroot.cpio.gz.uboot
tftp 0x20000000 192.168.1.2:buildroot.cpio.gz.uboot
Using FEC device
TFTP from server 192.168.1.2; our IP address is 192.168.1.156
Filename 'buildroot.cpio.gz.uboot'.
Load address: 0x20000000
Loading: *############################################
     1.5 MiB/s
done
Bytes transferred = 642602 (9ce2a hex)
=> tftp 0x1f000000 192.168.1.2:tmp/wand-dual-hydvF4/imx6dl-wandboard.dtb
tftp 0x1f000000 192.168.1.2:tmp/wand-dual-hydvF4/imx6dl-wandboard.dtb
Using FEC device
TFTP from server 192.168.1.2; our IP address is 192.168.1.156
Filename 'tmp/wand-dual-hydvF4/imx6dl-wandboard.dtb'.
Load address: 0x1f000000
Loading: *###
     1.4 MiB/s
done
Bytes transferred = 32741 (7fe5 hex)
=> printenv bootargs
printenv bootargs
bootargs=console=ttymxc0,115200 rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 ip=192.168.1.156:192.168.1.2:192.168.1.254:255.255.255.0:::none:192.168.1.254
=> bootz 0x18000000 0x20000000 0x1f000000
bootz 0x18000000 0x20000000 0x1f000000
## Loading init Ramdisk from Legacy Image at 20000000 ...
   Image Name:   
   Image Type:   ARM Linux RAMDisk Image (uncompressed)
   Data Size:    642538 Bytes = 627.5 KiB
   Load Address: 00000000
   Entry Point:  00000000
## Flattened Device Tree blob at 1f000000
   Booting using the fdt blob at 0x1f000000
   Using Device Tree in place at 1f000000, end 1f00afe4
Starting kernel ...
~$off
# PYBOOT: Exception: kernel: ERROR: did not start booting.
# PYBOOT: Time: 42.20 seconds.
# PYBOOT: Result: FAIL
davinci_all_defconfig
---------------------
da850-evm: FAIL: last 80 lines of boot log:
    -------------------------------------------
Starting SPI Memory Copy...
Valid magicnum, 0x55424CBB, found at offset 0x00010000.
   DONE
Jumping to entry point at 0xC1080000.
MMC:   davinci: 0
SF: Detected M25P64 with page size 256 Bytes, erase size 64 KiB, total 8 MiB
*** Warning - bad CRC, using default environment
In:    serial
Out:   serial
Err:   serial
SF: Detected M25P64 with page size 256 Bytes, erase size 64 KiB, total 8 MiB
Net:   DaVinci-EMAC
Hit any key to stop autoboot:  3 
 0 
U-Boot > 
U-Boot > version
version
U-Boot 2014.01-dirty (Feb 27 2014 - 15:12:48)
arm-linux-gnueabi-gcc (Ubuntu/Linaro 4.7.3-1ubuntu1) 4.7.3
GNU ld (GNU Binutils for Ubuntu) 2.23.52.20130913
U-Boot >setenv bootargs console=ttyS2,115200n8 debug earlyprintk
 setenv bootargs console=ttyS2,115200n8 debug earlyprintk
U-Boot > if test -n ${initenv}; then run initenv; fi
if test -n ${initenv}; then run initenv; fi
U-Boot > if test -n ${preboot}; then run preboot; fi
if test -n ${preboot}; then run preboot; fi
U-Boot > setenv autoload no; setenv autoboot no
setenv autoload no; setenv autoboot no
U-Boot > dhcp
dhcp
BOOTP broadcast 1
DHCP client bound to address 192.168.1.194
U-Boot >setenv serverip 192.168.1.2
 setenv serverip 192.168.1.2
U-Boot > if test -n ${netargs}; then run netargs; fi
if test -n ${netargs}; then run netargs; fi
U-Boot > tftp 0xc0800000 192.168.1.2:tmp/da850evm-6EZMHd/zImage-dtb-RdQpFW
tftp 0xc0800000 192.168.1.2:tmp/da850evm-6EZMHd/zImage-dtb-RdQpFW
Using DaVinci-EMAC device
TFTP from server 192.168.1.2; our IP address is 192.168.1.194
Filename 'tmp/da850evm-6EZMHd/zImage-dtb-RdQpFW'.
Load address: 0xc0800000
Loading: *#################################################################
     #################################################################
     ##############
     1.7 MiB/s
done
Bytes transferred = 2108905 (202de9 hex)
U-Boot > tftp 0xc0c00000 192.168.1.2:buildroot.cpio.gz.uboot
tftp 0xc0c00000 192.168.1.2:buildroot.cpio.gz.uboot
Using DaVinci-EMAC device
TFTP from server 192.168.1.2; our IP address is 192.168.1.194
Filename 'buildroot.cpio.gz.uboot'.
Load address: 0xc0c00000
Loading: *############################################
     1.7 MiB/s
done
Bytes transferred = 642602 (9ce2a hex)
U-Boot > printenv bootargs
printenv bootargs
bootargs=console=ttyS2,115200n8 debug earlyprintk
U-Boot > bootz 0xc0800000 0xc0c00000 
bootz 0xc0800000 0xc0c00000 
Kernel image @ 0xc0800000 [ 0x000000 - 0x2013e0 ]
## Loading init Ramdisk from Legacy Image at c0c00000 ...
   Image Name:   
   Image Type:   ARM Linux RAMDisk Image (uncompressed)
   Data Size:    642538 Bytes = 627.5 KiB
   Load Address: 00000000
   Entry Point:  00000000
   Verifying Checksum ... OK
Starting kernel ...
~$off
# PYBOOT: Exception: kernel: ERROR: did not start booting.
# PYBOOT: Time: 40.73 seconds.
# PYBOOT: Result: FAIL