Full logs are available at http://arm-soc.lixom.net/bootlogs/next/next-20150423/
Failed boards:
minnowmax x86-minnowmax_defconfig : FAILED 0:54.09 pi arm-exynos_defconfig : FAILED 0:30.96 pit arm-exynos_defconfig : FAILED 0:33.76 seaboard arm-tegra_defconfig : FAILED 2:00.01 seaboard arm-multi_v7_defconfig : FAILED 1:59.19 snowball arm-u8500_defconfig : FAILED 1:56.03 socfpga arm-multi_v7_defconfig : FAILED 3:04.43
Successful boards:
apc arm-vt8500_v6_v7_defconfig : passed 1:16.77 arndale arm-exynos_defconfig : passed 1:37.05 bbb arm-omap2plus_defconfig : passed 1:46.42 bbb arm-multi_v7_defconfig : passed 1:13.83 beaver arm-tegra_defconfig : passed 0:59.66 beaver arm-multi_v7_defconfig : passed 0:54.47 capri arm-bcm_defconfig : passed 0:39.75 capri arm-multi_v7_defconfig : passed 0:50.88 chitra powerpc-pasemi_defconfig : passed 1:24.02 chitra powerpc-ppc64_defconfig : passed 1:16.59 colombus arm-sunxi_defconfig : passed 1:00.92 colombus arm-multi_v7_defconfig : passed 1:20.88 colombus arm-multi_lpae_defconfig : passed 1:11.01 cosmic arm-imx_v6_v7_defconfig : passed 2:05.69 cosmic arm-multi_v7_defconfig : passed 1:31.67 cubie arm-sunxi_defconfig : passed 1:01.86 cubie arm-multi_v7_defconfig : passed 1:08.35 cubie2 arm-sunxi_defconfig : passed 0:59.35 cubie2 arm-multi_v7_defconfig : passed 1:06.28 cubie2 arm-multi_lpae_defconfig : passed 1:05.90 cubox arm-multi_v7_defconfig : passed 1:02.45 cubox arm-mvebu_v7_defconfig : passed 1:09.94 dalmore arm-tegra_defconfig : passed 1:27.26 dalmore arm-multi_v7_defconfig : passed 1:25.10 dalmore arm-multi_lpae_defconfig : passed 1:20.86 hummingboard arm-imx_v6_v7_defconfig : passed 1:31.06 hummingboard arm-multi_v7_defconfig : passed 1:12.82 jetsontk1 arm-tegra_defconfig : passed 0:55.95 jetsontk1 arm-multi_v7_defconfig : passed 0:53.58 jetsontk1 arm-multi_lpae_defconfig : passed 1:07.37 odroidu3 arm-exynos_defconfig : passed 0:59.26 omap5uevm arm-omap2plus_defconfig : passed 1:05.84 omap5uevm arm-multi_v7_defconfig : passed 1:11.75 omap5uevm arm-multi_lpae_defconfig : passed 1:16.78 pandaes arm-omap2plus_defconfig : warnings 1:37.88 pandaes arm-multi_v7_defconfig : passed 1:42.24 pi arm-multi_v7_defconfig : passed 1:00.13 pi arm-multi_lpae_defconfig : passed 0:53.84 pit arm-multi_v7_defconfig : passed 0:51.16 pit arm-multi_lpae_defconfig : passed 0:51.63 rk3288evb arm-multi_v7_defconfig : passed 0:53.62 rk3288evb arm-multi_lpae_defconfig : passed 0:46.59 sama5 arm-sama5_defconfig : passed 1:17.56 snowball arm-multi_v7_defconfig : passed 1:35.47 socfpga arm-socfpga_defconfig : passed 1:04.49 trimslice arm-tegra_defconfig : passed 1:00.30 trimslice arm-multi_v7_defconfig : passed 1:11.66 wandboard arm-imx_v6_v7_defconfig : passed 1:10.29 wandboard arm-multi_v7_defconfig : passed 1:04.24
Offline boards:
arndale arm-multi_v7_defconfig : OFFLINE 1:18.47 arndale arm-multi_lpae_defconfig : OFFLINE 1:22.62 parallella arm-multi_v7_defconfig : OFFLINE 1:25.70 snow arm-exynos_defconfig : OFFLINE 2:58.60 snow arm-multi_v7_defconfig : OFFLINE 1:45.64 snow arm-multi_lpae_defconfig : OFFLINE 1:43.06
Board legend is available at http://arm-soc.lixom.net/boards.html
Board minnowmax-x86-minnowmax_defconfig failure log: -------------------------------------------------
Connected to minnowmax console [channel connected] (~$quit to exit) ~$open
~$hardreset
Command(minnowmax console)> open console already open
Command(minnowmax console)> hardreset (user:build) Reset target node minnowmax status: off node minnowmax status: on
[PYBOOT] [minnowmax 00:51]: Timed out waiting for "<type 'str'>":
[PYBOOT] [minnowmax 00:52]: got exception: timeout ~$off
[PYBOOT] [minnowmax 00:53]: Done. Board pi-arm-exynos_defconfig failure log: -------------------------------------------------
[ 3.556065] exynos-dp 145b0000.dp-controller: Link Training success! [ 3.610990] Console: switching to colour frame buffer device 274x77 [ 3.719910] exynos-drm exynos-drm: fb0: frame buffer device [ 3.725548] exynos-drm exynos-drm: registered panic notifier [ 3.743082] [drm] Initialized exynos 1.0.0 20110530 on minor 0 [ 3.748026] input: gpio-keys as /devices/platform/gpio-keys/input/input2 [ 3.755751] max77802-rtc max77802-rtc: hctosys: unable to read the hardware clock [ 3.782143] TPS65090_RAILSLDO2: disabling [ 3.784719] TPS65090_RAILSLDO1: disabling [ 3.788690] TPS65090_RAILSDCDC3: disabling [ 3.792783] vdd_1v2_2: disabling [ 3.796598] ALSA device list: [ 3.798921] No soundcard[ 3.803617] EXT3-fs (mmcblk0p1): error: couldn't mount because of unsupported optional features (240) [ 3.811811] EXT2-fs (mmcblk0p1): error: couldn't mount because of unsupported optional features (240) [ 3.824242] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null) [ 3.830983] VFS: Mounted root (ext4 filesystem) readonly on device 179:1. [ 3.840089] devtmpfs: mounted [ 3.841768] Freeing unused kernel memory: 348K (c0733000 - c078a000) [ 3.851903] Unhandled fault: imprecise external abort (0x1406) at 0x00000000
[PYBOOT] [pi 00:28]: kernel: finished booting, starting userspace. [ 3.857461] pgd = ed330000 [ 3.860151] [00000000] *pgd=6d2ff831, *pte=00000000, *ppte=00000000 [ 3.873117] Kernel panic - not syncing: Attempted to kill init! exitcode=0x00000007 [ 3.873117] [ 3.880765] CPU: 0 PID: 1 Comm: init Not tainted 4.0.0-next-20150423 #1 [ 3.887355] Hardware name: SAMSUNG EXYNOS (Flattened Device Tree) [ 3.893447] [<c00153ec>] (unwind_backtrace) from [<c001231c>] (show_stack+0x10/0x14) [ 3.901159] [<c001231c>] (show_stack) from [<c0524280>] (dump_stack+0x84/0xc4) [ 3.908353] [<c0524280>] (dump_stack) from [<c0522884>] (panic+0x9c/0x200) [ 3.915208] [<c0522884>] (panic) from [<c00242e8>] (complete_and_exit+0x0/0x1c) [ 3.922492] [<c00242e8>] (complete_and_exit) from [<00000000>] ( (null)) [ 3.929258] drm_kms_helper: panic occurred, switching back to text console [ 3.936136] ---[ end Kernel panic - not syncing: Attempted to kill init! exitcode=0x00000007 [ 3.936136]
[PYBOOT] [pi 00:29]: got exception: panic ~$off
[PYBOOT] [pi 00:30]: Done. Board pit-arm-exynos_defconfig failure log: -------------------------------------------------
[ 3.999338] exynos-dp 145b0000.dp-controller: Link Training success! [ 4.017536] Console: switching to colour frame buffer device 195x54 [ 4.084161] exynos-drm exynos-drm: fb0: frame buffer device [ 4.089799] exynos-drm exynos-drm: registered panic notifier [ 4.108138] [drm] Initialized exynos 1.0.0 20110530 on minor 0 [ 4.113077] input: gpio-keys as /devices/platform/gpio-keys/input/input2 [ 4.120794] max77802-rtc max77802-rtc: hctosys: unable to read the hardware clock [ 4.146372] TPS65090_RAILSLDO2: disabling [ 4.148942] TPS65090_RAILSLDO1: disabling [ 4.152894] TPS65090_RAILSDCDC3: disabling [ 4.157028] vdd_1v2_2: disabling [ 4.160803] ALSA device list: [ 4.163146] No soundcard[ 4.167817] EXT3-fs (mmcblk0p1): error: couldn't mount because of unsupported optional features (240) [ 4.176035] EXT2-fs (mmcblk0p1): error: couldn't mount because of unsupported optional features (240) [ 4.188809] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null) [ 4.195542] VFS: Mounted root (ext4 filesystem) readonly on device 179:1. [ 4.204453] devtmpfs: mounted [ 4.206142] Freeing unused kernel memory: 348K (c0733000 - c [PYBOOT] [pit 00:31]: kernel: finished booting, starting userspace. 078a000) [ 4.215317] Unhandled fault: imprecise external abort (0x1406) at 0x00000000 [ 4.220880] pgd = ed324000 [ 4.223569] [00000000] *pgd=6d303831, *pte=00000000, *ppte=00000000 [ 4.238186] Kernel panic - not syncing: Attempted to kill init! exitcode=0x00000007 [ 4.238186] [ 4.245831] CPU: 0 PID: 1 Comm: init Not tainted 4.0.0-next-20150423 #1 [ 4.252422] Hardware name: SAMSUNG EXYNOS (Flattened Device Tree) [ 4.258513] [<c00153ec>] (unwind_backtrace) from [<c001231c>] (show_stack+0x10/0x14) [ 4.266226] [<c001231c>] (show_stack) from [<c0524280>] (dump_stack+0x84/0xc4) [ 4.273420] [<c0524280>] (dump_stack) from [<c0522884>] (panic+0x9c/0x200) [ 4.280274] [<c0522884>] (panic) from [<c00242e8>] (complete_and_exit+0x0/0x1c) [ 4.287558] [<c00242e8>] (complete_and_exit) from [<00000000>] ( (null)) [ 4.294324] drm_kms_helper: panic occurred, switching back to text console [ 4.301202] ---[ end Kernel panic - not syncing: Attempted to kill init! exitcode=0x00000007 [ 4.301202]
[PYBOOT] [pit 00:32]: got exception: panic ~$off
[PYBOOT] [pit 00:33]: Done. Board seaboard-arm-multi_v7_defconfig failure log: -------------------------------------------------
[ 1.767170] mmc0: queuing unknown CIS tuple 0x80 (50 bytes) [ 1.780954] mmc0: queuing unknown CIS tuple 0x80 (7 bytes) [ 1.789413] mmc0: queuing unknown CIS tuple 0x80 (7 bytes) [ 1.802451] mmc0: queuing unknown CIS tuple 0x80 (19 bytes) [ 1.824554] input: NVIDIA Tegra Seaboard Headphone Jack as /devices/soc0/sound/sound/card0/input2 [ 1.833856] input: NVIDIA Tegra Seaboard Mic Jack as /devices/soc0/sound/sound/card0/input3 [ 1.843589] NET: Registered protocol family 17 [ 1.848072] can: controller area network core (rev 20120528 abi 9) [ 1.854337] NET: Registered protocol family 29 [ 1.858802] can: raw protocol (rev 20120528) [ 1.863094] can: broadcast manager protocol (rev 20120528 t) [ 1.868775] can: netlink gateway (rev 20130117) max_hops=1 [ 1.874745] Key type dns_resolver registered [ 1.879429] ThumbEE CPU extension supported. [ 1.883737] Registering SWP/SWPB emulation handler [ 1.890928] mmc0: queuing unknown CIS tuple 0x02 (1 bytes) [ 1.895301] tegra-dc 54200000.dc: failed to probe RGB output: -517 [ 1.896589] 54280000.hdmi supply hdmi not found, using dummy regulator [ 1.901364] utmi_phy_clk_enable: timeout waiting for phy to stabilize [ 1.901392] tegra-ehci c5000000.usb: EHCI Host Controller [ 1.901423] tegra-ehci c5000000.usb: new USB bus registered, assigned bus number 3 [ 1.901729] tegra-ehci c5000000.usb: irq 287, io mem 0xc5000000 [ 1.912753] tegra-ehci c5000000.usb: USB 2.0 started, EHCI 1.00 [ 1.913665] hub 3-0:1.0: USB hub found [ 1.913708] hub 3-0:1.0: 1 port detected [ 1.917980] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 1.917983] [drm] No driver support for vblank timestamp query. [ 1.968135] mmc0: new SDIO card at address 0001 [ 2.034644] Console: switching to colour frame buffer device 170x48 [ 2.062316] drm drm: fb0: frame buffer device [ 2.066776] drm drm: registered panic notifier [ 2.082755] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 2.089725] input: gpio-keys as /devices/soc0/gpio-keys/input/input4
[PYBOOT] [seaboard 01:56]: Timed out waiting for "<type 'str'>":
[PYBOOT] [seaboard 01:57]: got exception: timeout ~$off
[PYBOOT] [seaboard 01:58]: Done. Board seaboard-arm-tegra_defconfig failure log: -------------------------------------------------
[ 1.716357] NET: Registered protocol family 29 [ 1.716379] can: raw protocol (rev 20120528) [ 1.716393] can: broadcast manager protocol (rev 20120528 t) [ 1.716438] can: netlink gateway (rev 20130117) max_hops=1 [ 1.751179] Bluetooth: RFCOMM socket layer initialized [ 1.756378] Bluetooth: RFCOMM ver 1.11 [ 1.757615] mmc0: new SDIO card at address 0001 [ 1.764848] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 1.770193] Bluetooth: BNEP socket layer initialized [ 1.775195] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 1.781153] Bluetooth: HIDP socket layer initialized [ 1.787928] Registering SWP/SWPB emulation handler [ 1.805167] tegra-dc 54200000.dc: failed to probe RGB output: -517 [ 1.811952] 54280000.hdmi supply hdmi not found, using dummy regulator [ 1.823280] utmi_phy_clk_enable: timeout waiting for phy to stabilize [ 1.829751] tegra-ehci c5000000.usb: EHCI Host Controller [ 1.835274] tegra-ehci c5000000.usb: new USB bus registered, assigned bus number 3 [ 1.843456] tegra-ehci c5000000.usb: irq 287, io mem 0xc5000000 [ 1.862111] tegra-ehci c5000000.usb: USB 2.0 started, EHCI 1.00 [ 1.871756] hub 3-0:1.0: USB hub found [ 1.875616] hub 3-0:1.0: 1 port detected [ 1.889893] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 1.896536] [drm] No driver support for vblank timestamp query. [ 1.991568] Console: switching to colour frame buffer device 170x48 [ 2.014749] drm drm: fb0: frame buffer device [ 2.019186] drm drm: registered panic notifier [ 2.052198] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 2.059730] input: gpio-keys as /devices/soc0/gpio-keys/input/input4 [ 2.067571] tps6586x-rtc tps6586x-rtc: setting system clock to 2009-01-01 00:00:00 UTC (1230768000) [ 2.089586] vdd_1v2: disabling [ 2.092684] vdd_1v5: disabling [ 2.096224] ALSA device list: [ 2.099188] #0: NVIDIA Tegra Seaboard
[PYBOOT] [seaboard 01:57]: Timed out waiting for "<type 'str'>":
[PYBOOT] [seaboard 01:58]: got exception: timeout ~$off
[PYBOOT] [seaboard 01:59]: Done. Board snowball-arm-u8500_defconfig failure log: -------------------------------------------------
[ 1.545227] mmci-pl18x 80005000.sdi2_per3: DMA channels RX dma0chan2, TX dma0chan3 [ 1.604614] V-eMMC1: supplied by ab8500-ext-supply3 [ 1.610107] mmci-pl18x 80114000.sdi4_per2: No vqmmc regulator found [ 1.616760] mmci-pl18x 80114000.sdi4_per2: mmc2: PL180 manf 80 rev4 at 0x80114000 irq 405,0 (pio) [ 1.626190] mmci-pl18x 80114000.sdi4_per2: DMA channels RX dma0chan4, TX dma0chan5 [ 1.677246] hash1 hash1: successfully registered [ 1.682189] [ux500_cryp_mod_init] is called! [ 1.686584] cryp1 cryp1: [ux500_cryp_probe] [ 1.691162] cryp1 cryp1: [cryp_enable_power] [ 1.695526] [cryp_algs_register_all] [ 1.701019] cryp1 cryp1: successfully registered [ 1.707244] usbcore: registered new interface driver usbhid [ 1.713104] usbhid: USB HID core driver [ 1.717498] V-DISPLAY: supplied by ab8500-ext-supply3 [ 1.744140] mmc2: new high speed MMC card at address 0001 [ 1.750885] mmcblk0: mmc2:0001 3.53 GiB [ 1.755554] mmcblk0boot0: mmc2:0001 partition 1 2.00 MiB [ 1.761413] mmcblk0boot1: mmc2:0001 partition 2 2.00 MiB [ 1.766937] mmcblk0rpmb: mmc2:0001 partition 3 128 KiB [ 1.773315] mmcblk0: p1 p2 p3 p4 [ 1.921295] nmk-i2c 80128000.i2c: write to slave 0x18 timed out [ 1.927276] nmk-i2c 80128000.i2c: no ack received after address transmission [ 2.131317] nmk-i2c 80128000.i2c: write to slave 0x18 timed out [ 2.137268] nmk-i2c 80128000.i2c: no ack received after address transmission [ 2.341217] nmk-i2c 80128000.i2c: write to slave 0x18 timed out [ 2.347320] nmk-i2c 80128000.i2c: no ack received after address transmission [ 2.354949] iio iio:device0: failed to read Who-Am-I register. [ 2.361358] st-accel-i2c: probe of 2-0018 failed with error -110 [ 2.381652] iio iio:device0: registered gyroscope l3g4200d [ 2.390380] iio iio:device1: DRDY on INT1 not available. [ 2.395935] st-magn-i2c: probe of 2-001e failed with error -22 [ 2.404418] iio iio:device1: DRDY on INT1 not available. [ 2.409790] st-press-i2c: probe of 2-005c failed with error -22
[PYBOOT] [snowball 01:53]: Timed out waiting for "<type 'str'>":
[PYBOOT] [snowball 01:54]: got exception: timeout ~$off
[PYBOOT] [snowball 01:55]: Done. Board socfpga-arm-multi_v7_defconfig failure log: -------------------------------------------------
[ 1.189913] dw_mmc ff704000.dwmmc0: Version ID is 240a [ 1.195072] dw_mmc ff704000.dwmmc0: DW MMC controller at irq 30, 32 bit host data width, 1024 deep fifo [ 1.204560] dw_mmc ff704000.dwmmc0: Got CD GPIO [ 1.237523] dw_mmc ff704000.dwmmc0: 1 slots initialized [ 1.243287] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.249741] ledtrig-cpu: registered to indicate activity on CPUs [ 1.255914] usbcore: registered new interface driver usbhid [ 1.261475] usbhid: USB HID core driver [ 1.267281] usbcore: registered new interface driver snd-usb-audio [ 1.275370] NET: Registered protocol family 17 [ 1.279834] can: controller area network core (rev 20120528 abi 9) [ 1.286053] NET: Registered protocol family 29 [ 1.290497] can: raw protocol (rev 20120528) [ 1.294763] can: broadcast manager protocol (rev 20120528 t) [ 1.300415] can: netlink gateway (rev 20130117) max_hops=1 [ 1.306231] Key type dns_resolver registered [ 1.310600] ThumbEE CPU extension supported. [ 1.314874] Registering SWP/SWPB emulation handler [ 1.321628] rtc-ds1307 0-0068: setting system clock to 2000-01-01 00:00:23 UTC (946684823) [ 1.331762] ALSA device list: [ 1.334754] No soundcards found. [ 1.338792] Waiting for root device /dev/mmcblk0p2... [ 1.368985] mmc_host mmc0: Bus speed (slot 0) = 200000000Hz (slot req 50000000Hz, actual 50000000HZ div = 2) [ 1.378843] mmc0: new high speed SDHC card at address 0002 [ 1.384633] mmcblk0: mmc0:0002 SD8GB 7.43 GiB [ 1.391649] mmcblk0: p1 p2 p3 [ 1.449116] EXT4-fs (mmcblk0p2): mounting ext3 file system using the ext4 subsystem [ 1.487050] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null) [ 1.495154] VFS: Mounted root (ext3 filesystem) readonly on device 179:2. [ 1.528906] devtmpfs: mounted [ 1.532471] Freeing unused kernel memory: 82 [PYBOOT] [socfpga 00:31]: kernel: finished booting, starting userspace. 0K (c0d9d000 - c0e6a000)
[PYBOOT] [socfpga 03:01]: Timed out waiting for "<type 'str'>":
[PYBOOT] [socfpga 03:02]: got exception: timeout ~$off
[PYBOOT] [socfpga 03:03]: Done.
kernel-build-reports@lists.linaro.org