Failed boards:
dalmore tegra_defconfig : FAILED 1:26.11 dalmore multi_v7_defconfig : FAILED 1:04.89 dalmore multi_lpae_defconfig : FAILED 1:05.27 hummingboard imx_v6_v7_defconfig : FAILED 2:58.59 panda multi_v7_defconfig : FAILED 3:08.40 wandboard imx_v6_v7_defconfig : FAILED 2:56.79
Successful boards:
apc vt8500_v6_v7_defconfig : passed 1:16.26 arndale exynos_defconfig : passed 1:03.83 bbb omap2plus_defconfig : passed 1:31.19 bbb multi_v7_defconfig : passed 1:22.22 beaver tegra_defconfig : passed 0:54.26 beaver multi_v7_defconfig : passed 0:50.65 capri bcm_defconfig : passed 0:45.46 capri multi_v7_defconfig : passed 0:44.89 cubie sunxi_defconfig : passed 0:53.33 cubie multi_v7_defconfig : passed 1:07.16 cubie2 sunxi_defconfig : passed 0:51.54 cubie2 multi_v7_defconfig : passed 1:12.44 cubie2 multi_lpae_defconfig : passed 1:10.74 cubox dove_defconfig : passed 1:10.35 hummingboard multi_v7_defconfig : passed 1:05.79 omap5uevm omap2plus_defconfig : warnings 1:11.34 omap5uevm multi_v7_defconfig : warnings 1:36.09 omap5uevm multi_lpae_defconfig : warnings 1:42.36 panda omap2plus_defconfig : passed 1:13.52 sama5 sama5_defconfig : passed 1:56.83 seaboard tegra_defconfig : passed 1:04.96 seaboard multi_v7_defconfig : passed 1:08.60 snow exynos_defconfig : passed 1:24.41 snowball u8500_defconfig : passed 1:32.69 snowball multi_v7_defconfig : passed 2:08.66 trimslice tegra_defconfig : passed 0:57.16 trimslice multi_v7_defconfig : passed 1:00.71 wandboard multi_v7_defconfig : passed 0:48.26
Offline boards:
Board legend is available at http://arm-soc.lixom.net/boards.html
Last entries of failed logs below:
========================================================================
Board dalmore-multi_lpae_defconfig failure log: -------------------------------------------------
Tegra114 (Dalmore) # tftp 0x82000000 mainline/v3.14-4848-ge6d9bfc/multi_lpae_defconfig/zImage tftp 0x82000000 mainline/v3.14-4848-ge6d9bfc/multi_lpae_defconfig/zImage Using asx0 device TFTP from server 172.16.1.3; our IP address is 172.16.1.134 Filename 'mainline/v3.14-4848-ge6d9bfc/multi_lpae_defconfig/zImage'. Load address: 0x82000000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################################ 2.8 MiB/s done Bytes transferred = 4511896 (44d898 hex) Tegra114 (Dalmore) # setenv serverip 172.16.1.3 setenv serverip 172.16.1.3 Tegra114 (Dalmore) # tftp 0x83000000 mainline/v3.14-4848-ge6d9bfc/multi_lpae_defconfig/dtbs/tegra114-dalmore.dtb tftp 0x83000000 mainline/v3.14-4848-ge6d9bfc/multi_lpae_defconfig/dtbs/tegra114-dalmore.dtb Using asx0 device TFTP from server 172.16.1.3; our IP address is 172.16.1.134 Filename 'mainline/v3.14-4848-ge6d9bfc/multi_lpae_defconfig/dtbs/tegra114-dalmore.dtb'. Load address: 0x83000000 Loading: *### 1007.8 KiB/s done Bytes transferred = 34059 (850b hex) Tegra114 (Dalmore) # printenv bootargs printenv bootargs bootargs=console=ttyS0,115200 root=/dev/mmcblk0p1 rootwait debug earlyprintk Tegra114 (Dalmore) # bootz 0x82000000 - 0x83000000 bootz 0x82000000 - 0x83000000 Kernel image @ 0x82000000 [ 0x000000 - 0x44d898 ] ## Flattened Device Tree blob at 83000000 Booting using the fdt blob at 0x83000000 Loading Device Tree to 8fff4000, end 8ffff50a ... OK
Starting kernel ...
~$off # PYBOOT: Exception: timeout
========================================================================
Board dalmore-multi_v7_defconfig failure log: -------------------------------------------------
Tegra114 (Dalmore) # tftp 0x82000000 mainline/v3.14-4848-ge6d9bfc/multi_v7_defconfig/zImage tftp 0x82000000 mainline/v3.14-4848-ge6d9bfc/multi_v7_defconfig/zImage Using asx0 device TFTP from server 172.16.1.3; our IP address is 172.16.1.134 Filename 'mainline/v3.14-4848-ge6d9bfc/multi_v7_defconfig/zImage'. Load address: 0x82000000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ############################################## 2.8 MiB/s done Bytes transferred = 4488032 (447b60 hex) Tegra114 (Dalmore) # setenv serverip 172.16.1.3 setenv serverip 172.16.1.3 Tegra114 (Dalmore) # tftp 0x83000000 mainline/v3.14-4848-ge6d9bfc/multi_v7_defconfig/dtbs/tegra114-dalmore.dtb tftp 0x83000000 mainline/v3.14-4848-ge6d9bfc/multi_v7_defconfig/dtbs/tegra114-dalmore.dtb Using asx0 device TFTP from server 172.16.1.3; our IP address is 172.16.1.134 Filename 'mainline/v3.14-4848-ge6d9bfc/multi_v7_defconfig/dtbs/tegra114-dalmore.dtb'. Load address: 0x83000000 Loading: *### 1 MiB/s done Bytes transferred = 34059 (850b hex) Tegra114 (Dalmore) # printenv bootargs printenv bootargs bootargs=console=ttyS0,115200 root=/dev/mmcblk0p1 rootwait debug earlyprintk Tegra114 (Dalmore) # bootz 0x82000000 - 0x83000000 bootz 0x82000000 - 0x83000000 Kernel image @ 0x82000000 [ 0x000000 - 0x447b60 ] ## Flattened Device Tree blob at 83000000 Booting using the fdt blob at 0x83000000 Loading Device Tree to 8fff4000, end 8ffff50a ... OK
Starting kernel ...
~$off # PYBOOT: Exception: timeout
========================================================================
Board dalmore-tegra_defconfig failure log: -------------------------------------------------
[ 1.038774] avdd-usb: 3300 mV [ 1.040770] avdd-usb: supplied by vdd-sys-5v0 [ 1.046913] rail-3v3: no parameters [ 1.050869] rail-5v0: no parameters [ 1.054452] REGEN3: no parameters [ 1.057350] SYSEN1: no parameters [ 1.060833] SYSEN2: no parameters [ 1.066019] Linux video capture interface: v2.00 [ 1.072487] platform 70019010.iommu: Driver tegra-smmu requests probe deferral [ 1.079364] Advanced Linux Sound Architecture Driver Initialized. [ 1.089145] Bluetooth: Core ver 2.18 [ 1.091191] NET: Registered protocol family 31 [ 1.095489] Bluetooth: HCI device and connection manager initialized [ 1.101903] Bluetooth: HCI socket layer initialized [ 1.106882] Bluetooth: L2CAP socket layer initialized [ 1.112118] Bluetooth: SCO socket layer initialized [ 1.119520] cfg80211: Calling CRDA to update world regulatory domain [ 1.126609] Switched to clocksource arch_sys_counter [ 1.215670] NET: Registered protocol family 2 [ 1.221556] TCP established hash table entries: 8192 (order: 3, 32768 bytes) [ 1.227236] TCP bind hash table entries: 8192 (order: 4, 65536 bytes) [ 1.233938] TCP: Hash tables configured (established 8192 bind 8192) [ 1.241394] TCP: reno registered [ 1.243034] UDP hash table entries: 512 (order: 2, 16384 bytes) [ 1.249182] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) [ 1.256788] NET: Registered protocol family 1 [ 1.262251] RPC: Registered named UNIX socket transport module. [ 1.266369] RPC: Registered udp transport module. [ 1.271282] RPC: Registered tcp transport module. [ 1.275904] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 1.282473] PCI: CLS 0 bytes, default 64 [ 1.302702] futex hash table entries: 1024 (order: 4, 65536 bytes) [ 1.311852] bounce pool size: 64 pages [ 1.319621] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 1.326550] msgmni has been set to 1468 [ 1.335317] io scheduler noop registered (default) [ 1.367322] tegra114-pinctrl 70000868.pinmux: Config param 000e not supported on group drive_gma [ 1.374318] tegra114-pinctrl 70000868.pinmux: pin_config_group_set op failed for group 199 [ 1.382691] tegra114-pinctrl 70000868.pinmux: Error applying setting,~$off # PYBOOT: Exception: timeout
========================================================================
Board hummingboard-imx_v6_v7_defconfig failure log: -------------------------------------------------
stack backtrace: CPU: 0 PID: 21 Comm: kworker/0:1 Not tainted 3.14.0+ #1 Workqueue: ipv6_addrconf addrconf_dad_work Backtrace: [<8001217c>] (dump_backtrace) from [<80012460>] (show_stack+0x18/0x1c) r6:9f4acc00 r5:00000000 r4:808ab710 r3:9f4acc00 [<80012448>] (show_stack) from [<8062579c>] (dump_stack+0x84/0x9c) [<80625718>] (dump_stack) from [<80621ccc>] (print_usage_bug+0x260/0x2d0) r5:80782e58 r4:809a5ec0 [<80621a6c>] (print_usage_bug) from [<8006312c>] (mark_lock+0x1e0/0x6b0) r9:800626d4 r8:00000004 r7:9f4acc00 r6:00001054 r5:9f4ad090 r4:00000006 [<80062f4c>] (mark_lock) from [<800641f8>] (__lock_acquire+0x600/0x1c28) r10:000001d1 r9:9f4ad090 r8:808ab7f4 r7:80dd7d2c r6:9f4acc00 r5:9f5a6030 r4:9fbdb35c r3:00000004 [<80063bf8>] (__lock_acquire) from [<8006600c>] (lock_acquire+0x70/0x84) r10:00000001 r9:00000000 r8:8088ed24 r7:00000001 r6:9f5a6000 r5:00000000 r4:60000013 [<80065f9c>] (lock_acquire) from [<80583d64>] (mld_sendpack+0x428/0x778) r7:0000004c r6:80584724 r5:808dde00 r4:9fbdb238 [<8058393c>] (mld_sendpack) from [<80584724>] (mld_send_initial_cr.part.37+0x9c/0xb0) r10:00000000 r9:9f7f70d0 r8:00000000 r7:00000001 r6:9ef55e40 r5:9edef068 r4:00000000 [<80584688>] (mld_send_initial_cr.part.37) from [<80587c3c>] (ipv6_mc_dad_complete+0x34/0x5c) r9:00000000 r8:9f7f70d0 r7:9ef79e00 r6:9ef79e20 r5:9f43d000 r4:9f7f7000 [<80587c08>] (ipv6_mc_dad_complete) from [<8056b364>] (addrconf_dad_completed+0xfc/0x1a8) r4:9ef79e00 r3:9f4acc00 [<8056b268>] (addrconf_dad_completed) from [<8056b610>] (addrconf_dad_work+0x200/0x318) r5:9ef79e1c r4:9ef79e74 [<8056b410>] (addrconf_dad_work) from [<8003e6e0>] (process_one_work+0x19c/0x454) r9:00000001 r8:9fbdb000 r7:9f5a7eb0 r6:9fbd55c0 r5:9ef79e74 r4:9f589a00 [<8003e544>] (process_one_work) from [<8003f4f0>] (worker_thread+0x11c/0x3c4) r10:9fbd55c0 r9:808e6eb6 r8:9f5a6000 r7:9f5a6030 r6:9f589a18 r5:9fbd55f0 r4:9f589a00 [<8003f3d4>] (worker_thread) from [<80045778>] (kthread+0xd4/0xf0) r10:00000000 r9:00000000 r8:00000000 r7:8003f3d4 r6:9f589a00 r5:00000000 r4:9f58c200 [<800456a4>] (kthread) from [<8000e9c8>] (ret_from_fork+0x14/0x2c) r7:00000000 r6:00000000 r5:800456a4 r4:9f58c200 ~$off # PYBOOT: Exception: timeout
========================================================================
Board panda-multi_v7_defconfig failure log: -------------------------------------------------
[ 1.723022] VMMC: 1200 <--> 3000 mV at 3000 mV [ 1.728546] VPP: 1800 <--> 2500 mV at 1900 mV [ 1.734008] VUSIM: 1200 <--> 2900 mV at 1800 mV [ 1.739471] VDAC: 1800 mV [ 1.739471] VANA: 2100 mV [ 1.746246] VCXIO: 1800 mV [ 1.749237] VUSB: 3300 mV [ 1.753143] V1V8: 1800 mV [ 1.756652] V2V1: 2100 mV [ 1.888824] usb 1-1: new high-speed USB device number 2 using ehci-omap [ 1.969421] omap_i2c 48070000.i2c: bus 0 rev0.11 at 400 kHz [ 1.979156] omap_i2c 48072000.i2c: bus 1 rev0.11 at 400 kHz [ 1.988037] omap_i2c 48060000.i2c: bus 2 rev0.11 at 100 kHz [ 1.995452] omap_i2c 48350000.i2c: bus 3 rev0.11 at 400 kHz [ 2.001739] 4809c000.mmc supply vmmc_aux not found, using dummy regulator [ 2.010437] omap_hsmmc 4809c000.mmc: pins are not configured from the driver [ 2.040496] hub 1-1:1.0: USB hub found [ 2.044708] hub 1-1:1.0: 5 ports detected [ 2.062622] 480d5000.mmc supply vmmc_aux not found, using dummy regulator [ 2.097839] mmc0: host does not support reading read-only switch. assuming write-enable. [ 2.108520] mmc0: new high speed SDHC card at address b368 [ 2.114624] mmcblk0: mmc0:b368 00000 7.51 GiB [ 2.120880] mmcblk0: p1 p2 [ 2.300445] twl_rtc rtc.11: setting system clock to 2000-01-01 00:00:00 UTC (946684800) [ 2.303558] omap_hsmmc 480d5000.mmc: card claims to support voltages below defined range [ 2.313995] mmc1: queuing unknown CIS tuple 0x91 (3 bytes) [ 2.315307] mmc1: new SDIO card at address 0001 [ 2.333648] ALSA device list: [ 2.333648] No soundcards found. [ 2.338958] usb 1-1.1: new high-speed USB device number 3 using ehci-omap [ 2.349212] EXT4-fs (mmcblk0p2): couldn't mount as ext3 due to feature incompatibilities [ 2.358673] EXT4-fs (mmcblk0p2): couldn't mount as ext2 due to feature incompatibilities [ 2.382263] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null) [ 2.388793] VFS: Mounted root (ext4 filesystem) readonly on device 179:2. [ 2.408843] devtmpfs: mounted [ 2.411987] Freeing unused kernel memory: 520K (c0828000 - c08aa000) [ 2.462127] smsc95xx v1.0.4 [ 2.544952] smsc95xx 1-1.1:1.0 eth0: register 'smsc95xx' at usb-4a064c00.ehci-1.1, smsc95xx USB 2.0 Ethernet, 1e:7a:8b:0d:a6:96 INIT: version 2.88 booting~$off # PYBOOT: Exception: timeout
========================================================================
Board wandboard-imx_v6_v7_defconfig failure log: -------------------------------------------------
stack backtrace: CPU: 3 PID: 69 Comm: kworker/3:1 Not tainted 3.14.0+ #1 Workqueue: ipv6_addrconf addrconf_dad_work Backtrace: [<8001217c>] (dump_backtrace) from [<80012460>] (show_stack+0x18/0x1c) r6:ed488000 r5:00000000 r4:808ab710 r3:ed488000 [<80012448>] (show_stack) from [<8062579c>] (dump_stack+0x84/0x9c) [<80625718>] (dump_stack) from [<80621ccc>] (print_usage_bug+0x260/0x2d0) r5:80782e58 r4:809a8500 [<80621a6c>] (print_usage_bug) from [<8006312c>] (mark_lock+0x1e0/0x6b0) r9:800626d4 r8:00000004 r7:ed488000 r6:00001054 r5:ed488490 r4:00000006 [<80062f4c>] (mark_lock) from [<800641f8>] (__lock_acquire+0x600/0x1c28) r10:000001f5 r9:ed488490 r8:808ab7f4 r7:80dd7d2c r6:ed488000 r5:ed490030 r4:ee7ce45c r3:00000004 [<80063bf8>] (__lock_acquire) from [<8006600c>] (lock_acquire+0x70/0x84) r10:00000001 r9:00000000 r8:8088ed24 r7:00000001 r6:ed490000 r5:00000000 r4:60000013 [<80065f9c>] (lock_acquire) from [<80583d64>] (mld_sendpack+0x428/0x778) r7:0000004c r6:80584724 r5:808dde00 r4:ee7ce338 [<8058393c>] (mld_sendpack) from [<80584724>] (mld_send_initial_cr.part.37+0x9c/0xb0) r10:00000000 r9:ed98bcd0 r8:00000000 r7:00000001 r6:edbe6540 r5:ed96f5a8 r4:00000000 [<80584688>] (mld_send_initial_cr.part.37) from [<80587c3c>] (ipv6_mc_dad_complete+0x34/0x5c) r9:00000000 r8:ed98bcd0 r7:ed6c5200 r6:ed6c5220 r5:ee259000 r4:ed98bc00 [<80587c08>] (ipv6_mc_dad_complete) from [<8056b364>] (addrconf_dad_completed+0xfc/0x1a8) r4:ed6c5200 r3:ed488000 [<8056b268>] (addrconf_dad_completed) from [<8056b610>] (addrconf_dad_work+0x200/0x318) r5:ed6c521c r4:ed6c5274 [<8056b410>] (addrconf_dad_work) from [<8003e6e0>] (process_one_work+0x19c/0x454) r9:00000001 r8:ee7ce100 r7:ed491eb0 r6:ee7c85c0 r5:ed6c5274 r4:ed452180 [<8003e544>] (process_one_work) from [<8003f4f0>] (worker_thread+0x11c/0x3c4) r10:ee7c85c0 r9:808e6eb6 r8:ed490000 r7:ed490030 r6:ed452198 r5:ee7c85f0 r4:ed452180 [<8003f3d4>] (worker_thread) from [<80045778>] (kthread+0xd4/0xf0) r10:00000000 r9:00000000 r8:00000000 r7:8003f3d4 r6:ed452180 r5:00000000 r4:ed454000 [<800456a4>] (kthread) from [<8000e9c8>] (ret_from_fork+0x14/0x2c) r7:00000000 r6:00000000 r5:800456a4 r4:ed454000 ~$off # PYBOOT: Exception: timeout
kernel-build-reports@lists.linaro.org
-
Olof's autobooter