Automated DT boot report for various ARM defconfigs.

Tree/Branch: mainline Git describe: v3.14-11030-ga7963eb Failed boot tests (console logs at the end) =========================================== bcm28155-ap: FAIL: bcm_defconfig

Full Report ===========

omap2plus_defconfig ------------------- legacy,3730xm 0 min 52.9 sec: PASS am335x-boneblack 0 min 25.8 sec: PASS omap3-beagle-xm 1 min 0.6 sec: PASS legacy,3530beagle 0 min 34.5 sec: PASS (Warnings: 1) omap4-panda 1 min 8.9 sec: PASS omap3-overo-tobi 0 min 23.4 sec: PASS (Warnings: 1) am335x-bone 0 min 27.5 sec: PASS omap3-overo-storm-tobi 0 min 29.9 sec: PASS omap5-uevm 1 min 1.8 sec: PASS (Warnings: 1) omap4-panda-es 1 min 13.7 sec: PASS legacy,3730storm 0 min 23.1 sec: PASS legacy,3530overo 0 min 21.5 sec: PASS (Warnings: 1)

multi_lpae_defconfig -------------------- omap5-uevm 1 min 35.4 sec: PASS (Warnings: 1) sun7i-a20-cubieboard2 0 min 12.2 sec: PASS

tegra_defconfig --------------- tegra30-beaver 0 min 17.2 sec: PASS

imx_v6_v7_defconfig ------------------- imx6dl-wandboard,wand-dual 0 min 18.5 sec: PASS imx6dl-wandboard,wand-solo 0 min 18.8 sec: PASS imx6q-wandboard 0 min 17.2 sec: PASS

sunxi_defconfig --------------- sun7i-a20-cubieboard2 0 min 22.7 sec: PASS sun4i-a10-cubieboard 0 min 13.0 sec: PASS

bcm_defconfig ------------- bcm28155-ap 0 min 45.0 sec: FAIL

mvebu_v7_defconfig ------------------ armada-xp-openblocks-ax3-4 0 min 22.3 sec: PASS armada-370-mirabox 0 min 20.4 sec: PASS

exynos_defconfig ---------------- exynos5250-arndale 0 min 30.0 sec: PASS

multi_v7_defconfig ------------------ qcom-apq8074-dragonboard 0 min 16.7 sec: PASS tegra30-beaver 0 min 17.3 sec: PASS am335x-boneblack 0 min 24.1 sec: PASS omap3-beagle-xm 0 min 54.2 sec: PASS sun7i-a20-cubieboard2 0 min 12.4 sec: PASS armada-370-mirabox 0 min 22.4 sec: PASS omap4-panda 0 min 53.4 sec: PASS armada-xp-openblocks-ax3-4 0 min 25.2 sec: PASS sun4i-a10-cubieboard 0 min 14.2 sec: PASS bcm28155-ap 0 min 21.3 sec: PASS omap3-overo-tobi 0 min 25.5 sec: PASS (Warnings: 1) imx6dl-wandboard,wand-solo 0 min 18.1 sec: PASS am335x-bone 0 min 26.9 sec: PASS omap3-overo-storm-tobi 0 min 24.0 sec: PASS omap5-uevm 1 min 37.0 sec: PASS (Warnings: 1) imx6q-wandboard 0 min 16.9 sec: PASS omap4-panda-es 0 min 53.6 sec: PASS imx6dl-wandboard,wand-dual 0 min 18.1 sec: PASS

sama5_defconfig --------------- sama5d35ek 0 min 17.1 sec: PASS

davinci_all_defconfig --------------------- legacy,dm365evm 0 min 17.5 sec: PASS

Console logs for failures =========================

bcm_defconfig -------------

bcm28155-ap: FAIL: last 80 lines of boot log: ---------------------------------------------

Boot2 starts main image at 0xae000000 ...

U-Boot 2013.01 (Nov 12 2013 - 15:29:56)

I2C: ready DRAM: 768 MiB WARNING: Caches not enabled Relocation Offset is: 11f84000 MMC: KONA SD/MMC: 0, KONA SD/MMC: 1 kona_mmc_send_cmd: waiting for status update kona_mmc_send_cmd: waiting for status update In: serial Out: serial Err: serial Disabling watchdog Hit any key to stop autoboot: 1  0 capri> capri> version version

U-Boot 2013.01 (Nov 12 2013 - 15:29:56) arm-linux-gnueabihf-gcc (crosstool-NG linaro-1.13.1-2012.08-20120827 - Linaro GCC 2012.08) 4.7.2 20120731 (prerelease) GNU ld (crosstool-NG linaro-1.13.1-2012.08-20120827 - Linaro GCC 2012.08) 2.22 capri> if test -n ${initenv}; then run initenv; fi if test -n ${initenv}; then run initenv; fi capri> if test -n ${preboot}; then run preboot; fi if test -n ${preboot}; then run preboot; fi capri> fastboot ~$fastboot tmp/capri-moZf10/zImage tmp/capri-moZf10/bcm28155-ap.dtb None fastboot Adding: abi, offset 0x00000100, size 0x0000000000020000, flags 0x00000000 Adding: loader, offset 0x00000300, size 0x0000000000020000, flags 0x00000000 Adding: u-boot, offset 0x00011000, size 0x0000000000100000, flags 0x00000000 Adding: hw-blob, offset 0x00011800, size 0x0000000000040000, flags 0x00000000 Adding: u-boot-env, offset 0x00011a00, size 0x0000000000001000, flags 0x00000000 Adding: de Command(capri console)> fastboot tmp/capri-moZf10/zImage tmp/capri-moZf10/bcm28155-ap.dtb Nonevice-tree, offset 0x00011a80, size 0x0000000000020000, flags 0x00000000 Adding: kernel, offset 0x0001c000, size 0x0000000001000000, flags 0x00000000 Adding: file-system, offset 0x00024000, size 0x00000000a0000000, flags 0x00000000 Adding: initrd, offset 0x00524000, size 0x0000000002000000, flags 0x00000000

(user:khilman) fastboot capri eS Su USB speed: High GET_DESC ->DEVICE DESC eS USB speed: High GET_DESC ->DEVICE DESC GET_DESC ->CONFIG DESC GET_DESC ->CONFIG DESC GET_DESC ->STRING DESC GET_DESC ->STRING DESC GET_DESC ->STRING DESC GET_DESC ->STRING DESC SET_CONFIG GET_DESC ->STRING DESC GET_DESC ->STRING DESC GET_DESC ->STRING DESC TFTP: download kernel (tmp/capri-BA14WM/zImage) to /tmp/kernel-8AxHqM TFTP: download dtb (tmp/capri-BA14WM/bcm28155-ap.dtb) to /tmp/dtb-kQzQBz Deleting /tmp/kernel-8AxHqM Deleting /tmp/dtb-kQzQBz

MMC read: dev # 0, block # 72320, count 16384 ... 16384 blocks read: OK

MMC read: dev # 0, block # 114688, count 32768 ... 32768 blocks read: OK ## Flattened Device Tree blob at 9e000000 Booting using the fdt blob at 0x9e000000 Using Device Tree in place at 9e000000, end 9e004d96

Starting kernel ...

< waiting for device > ~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 45.00 seconds. # PYBOOT: Result: FAIL