Full logs are available at http://arm-soc.lixom.net/bootlogs/mainline/v4.7-rc5-28-g02184c6/
Failed boards:
arndale multi_v7_nosmp_defconfig : NO BUILD bbb multi_v7_nosmp_defconfig : NO BUILD beagleboard-x15 multi_v7_nosmp_defconfig : NO BUILD beaver arm-tegra_defconfig : FAILED 1:45.24 beaver arm-multi_v7_defconfig : FAILED 1:50.98 beaver multi_v7_nosmp_defconfig : NO BUILD capri multi_v7_nosmp_defconfig : NO BUILD colibri-vf61 multi_v7_nosmp_defconfig : NO BUILD colombus multi_v7_nosmp_defconfig : NO BUILD cosmic multi_v7_nosmp_defconfig : NO BUILD cubie multi_v7_nosmp_defconfig : NO BUILD cubie2 multi_v7_nosmp_defconfig : NO BUILD cubox multi_v7_nosmp_defconfig : NO BUILD dalmore multi_v7_nosmp_defconfig : NO BUILD hummingboard multi_v7_nosmp_defconfig : NO BUILD jetsontk1 multi_v7_nosmp_defconfig : NO BUILD minnowmax minnowmax_defconfig : NO BUILD odroidu3 arm-exynos_defconfig : FAILED 1:51.19 omap5uevm arm-multi_v7_defconfig : FAILED 0:48.09 omap5uevm arm-multi_lpae_defconfig : FAILED 2:09.01 omap5uevm multi_v7_nosmp_defconfig : NO BUILD pandaes multi_v7_nosmp_defconfig : NO BUILD parallella multi_v7_nosmp_defconfig : NO BUILD pi arm-exynos_defconfig : FAILED 0:31.42 pi arm-multi_v7_defconfig : FAILED 1:52.41 pi arm-multi_lpae_defconfig : FAILED 1:57.05 pi multi_v7_nosmp_defconfig : NO BUILD pit multi_v7_nosmp_defconfig : NO BUILD rk3288evb multi_v7_nosmp_defconfig : NO BUILD seaboard multi_v7_nosmp_defconfig : NO BUILD snow multi_v7_nosmp_defconfig : NO BUILD snowball multi_v7_nosmp_defconfig : NO BUILD socfpga multi_v7_nosmp_defconfig : NO BUILD trimslice multi_v7_nosmp_defconfig : NO BUILD wandboard arm-imx_v6_v7_defconfig : FAILED 2:59.29 wandboard multi_v7_nosmp_defconfig : NO BUILD
Successful boards:
apc arm-vt8500_v6_v7_defconfig : passed 1:13.91 arndale arm-exynos_defconfig : passed 1:32.40 arndale arm-multi_v7_defconfig : passed 1:35.72 arndale arm-multi_lpae_defconfig : passed 1:24.34 bbb arm-omap2plus_defconfig : passed 1:46.56 bbb arm-multi_v7_defconfig : passed 1:19.03 beagleboard-x15 arm-omap2plus_defconfig : warnings 0:58.98 beagleboard-x15 arm-multi_v7_defconfig : warnings 0:53.79 beagleboard-x15 arm-multi_lpae_defconfig : warnings 0:55.78 capri arm-bcm_defconfig : passed 0:49.59 capri arm-multi_v7_defconfig : passed 0:56.36 chitra powerpc-pasemi_defconfig : passed 2:02.78 chitra powerpc-ppc64_defconfig : passed 2:58.43 colombus arm-sunxi_defconfig : passed 2:35.90 colombus arm-multi_v7_defconfig : passed 2:39.68 colombus arm-multi_lpae_defconfig : passed 2:31.43 cosmic arm-imx_v6_v7_defconfig : passed 3:21.90 cosmic arm-multi_v7_defconfig : passed 2:55.45 cubie arm-sunxi_defconfig : passed 0:52.25 cubie arm-multi_v7_defconfig : passed 0:53.44 cubie2 arm-sunxi_defconfig : passed 0:49.47 cubie2 arm-multi_v7_defconfig : passed 0:59.03 cubie2 arm-multi_lpae_defconfig : passed 0:58.56 cubox arm-multi_v7_defconfig : passed 1:24.78 cubox arm-mvebu_v7_defconfig : passed 1:05.19 dalmore arm-multi_v7_defconfig : passed 1:25.06 dalmore arm-multi_lpae_defconfig : passed 1:25.13 jetsontk1 arm-tegra_defconfig : passed 0:49.63 jetsontk1 arm-multi_v7_defconfig : passed 0:49.60 jetsontk1 arm-multi_lpae_defconfig : passed 0:52.15 omap5uevm arm-omap2plus_defconfig : passed 1:05.82 pandaes arm-omap2plus_defconfig : warnings 1:44.59 pandaes arm-multi_v7_defconfig : passed 1:39.87 parallella arm-multi_v7_defconfig : passed 2:49.64 pit arm-exynos_defconfig : passed 2:12.91 pit arm-multi_v7_defconfig : passed 2:15.89 pit arm-multi_lpae_defconfig : passed 2:16.43 seaboard arm-tegra_defconfig : passed 1:01.31 seattle arm64-defconfig : passed 2:33.03 snow arm-exynos_defconfig : passed 2:11.11 snow arm-multi_v7_defconfig : passed 2:01.90 snow arm-multi_lpae_defconfig : passed 2:01.32 snowball arm-u8500_defconfig : passed 1:16.20 snowball arm-multi_v7_defconfig : passed 1:27.20 trimslice arm-tegra_defconfig : passed 1:36.47 trimslice arm-multi_v7_defconfig : passed 2:41.70 wandboard arm-multi_v7_defconfig : passed 1:16.91
Offline boards:
colibri-vf61 arm-imx_v6_v7_defconfig : OFFLINE 1:16.83 colibri-vf61 arm-multi_v7_defconfig : OFFLINE 1:31.57 dalmore arm-tegra_defconfig : OFFLINE 1:59.67 hummingboard arm-imx_v6_v7_defconfig : OFFLINE 2:22.10 hummingboard arm-multi_v7_defconfig : OFFLINE 2:12.58 rk3288evb arm-multi_v7_defconfig : OFFLINE 0:48.22 rk3288evb arm-multi_lpae_defconfig : OFFLINE 0:46.46 sama5 arm-sama5_defconfig : OFFLINE 2:21.02 sama5d3-xplained arm-sama5_defconfig : OFFLINE 2:21.79 seaboard arm-multi_v7_defconfig : OFFLINE 2:05.10 socfpga arm-socfpga_defconfig : OFFLINE 2:18.30 socfpga arm-multi_v7_defconfig : OFFLINE 2:17.03
Board legend is available at http://arm-soc.lixom.net/boards.html
Last entries of failed logs below:
========================================================================
Board beaver-arm-multi_v7_defconfig failure log: -------------------------------------------------
[ 3.258128] pcieport 0000:00:01.0: Signaling PME through PCIe PME interrupt [ 3.265086] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt [ 3.271606] pcie_pme 0000:00:01.0:pcie001: service driver pcie_pme loaded [ 3.278545] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 3.284130] r8169 0000:01:00.0: enabling device (0140 -> 0143) [ 3.291142] r8169 0000:01:00.0 eth0: RTL8168evl/8111evl at 0xf09f2000, 02:04:4b:01:60:99, XID 0c900800 IRQ 375 [ 3.301144] r8169 0000:01:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko] [ 3.312905] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 3.319524] [drm] No driver support for vblank timestamp query. [ 3.325460] drm drm: No connectors reported connected with modes [ 3.331466] [drm] Cannot find any crtc or sizes - going 1024x768 [ 3.356810] Console: switching to colour frame buffer device 128x48 [ 3.368952] drm drm: fb0: frame buffer device [ 3.388400] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 3.399256] utmi_phy_clk_enable: timeout waiting for phy to stabilize [ 3.405720] tegra-ehci 7d004000.usb: EHCI Host Controller [ 3.411128] tegra-ehci 7d004000.usb: new USB bus registered, assigned bus number 1 [ 3.418963] tegra-ehci 7d004000.usb: irq 343, io mem 0x7d004000 [ 3.433411] tegra-ehci 7d004000.usb: USB 2.0 started, EHCI 1.00 [ 3.440174] hub 1-0:1.0: USB hub found [ 3.443949] hub 1-0:1.0: 1 port detected [ 3.448873] tegra-ehci 7d008000.usb: EHCI Host Controller [ 3.454283] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 2 [ 3.462016] tegra-ehci 7d008000.usb: irq 344, io mem 0x7d008000 [ 3.473404] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.00 [ 3.480074] hub 2-0:1.0: USB hub found [ 3.483847] hub 2-0:1.0: 1 port detected [ 3.492697] tps65910-rtc tps65910-rtc: setting system clock to 2000-01-01 00:00:02 UTC (946684802) [ 3.506533] vdd_sata,avdd_plle: disabling [ 3.511248] usb1_vbus: disabling [ 3.515357] Waiting for root device /dev/mmcblk0p1... [ 3.793411] usb 2-1: new high-speed USB device number 2 using tegra-ehci [ 4.732001] asix 2-1:1.0 eth1: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 58:6d:8f:50:ba:18
[PYBOOT] [beaver 01:48]: Timed out waiting for "<type 'str'>":
[PYBOOT] [beaver 01:49]: got exception: timeout ~$off
[PYBOOT] [beaver 01:50]: Done.
========================================================================
Board beaver-arm-tegra_defconfig failure log: -------------------------------------------------
[ 6.194198] pcie_pme 0000:00:01.0:pcie001: service driver pcie_pme loaded [ 6.201237] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 6.206837] r8169 0000:01:00.0: enabling device (0140 -> 0143) [ 6.214341] r8169 0000:01:00.0 eth0: RTL8168evl/8111evl at 0xf087e000, 02:04:4b:01:60:99, XID 0c900800 IRQ 375 [ 6.224342] r8169 0000:01:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko] [ 6.236969] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 6.243605] [drm] No driver support for vblank timestamp query. [ 6.249600] drm drm: No connectors reported connected with modes [ 6.255624] [drm] Cannot find any crtc or sizes - going 1024x768 [ 6.281254] Console: switching to colour frame buffer device 128x48 [ 6.293041] drm drm: fb0: frame buffer device [ 6.320785] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 6.330063] utmi_phy_clk_enable: timeout waiting for phy to stabilize [ 6.336542] tegra-ehci 7d004000.usb: EHCI Host Controller [ 6.341973] tegra-ehci 7d004000.usb: new USB bus registered, assigned bus number 1 [ 6.349947] tegra-ehci 7d004000.usb: irq 343, io mem 0x7d004000 [ 6.370785] tegra-ehci 7d004000.usb: USB 2.0 started, EHCI 1.00 [ 6.378408] hub 1-0:1.0: USB hub found [ 6.382205] hub 1-0:1.0: 1 port detected [ 6.387024] tegra-ehci 7d008000.usb: EHCI Host Controller [ 6.392466] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 2 [ 6.400334] tegra-ehci 7d008000.usb: irq 344, io mem 0x7d008000 [ 6.420779] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.00 [ 6.428258] hub 2-0:1.0: USB hub found [ 6.432044] hub 2-0:1.0: 1 port detected [ 6.441987] tps65910-rtc tps65910-rtc: setting system clock to 2000-01-01 00:00:02 UTC (946684802) [ 6.460160] vdd_sata,avdd_plle: disabling [ 6.464877] usb1_vbus: disabling [ 6.468288] ALSA device list: [ 6.471260] #0: NVIDIA Tegra Beaver [ 6.475484] Waiting for root device /dev/mmcblk0p1... [ 6.750784] usb 2-1: new high-speed USB device number 2 using tegra-ehci [ 7.736219] asix 2-1:1.0 eth1: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 58:6d:8f:50:ba:18
[PYBOOT] [beaver 01:41]: Timed out waiting for "<type 'str'>":
[PYBOOT] [beaver 01:42]: got exception: timeout ~$off
[PYBOOT] [beaver 01:43]: Done.
========================================================================
Board odroidu3-arm-exynos_defconfig failure log: -------------------------------------------------
[ 1.786066] NET: Registered protocol family 10 [ 1.791693] sit: IPv6 over IPv4 tunneling driver [ 1.792156] NET: Registered protocol family 17 [ 1.795101] NET: Registered protocol family 15 [ 1.799577] Key type dns_resolver registered [ 1.803928] Registering SWP/SWPB emulation handler [ 1.811877] [drm] Exynos DRM: using 12c10000.mixer device for DMA mapping operations [ 1.816511] exynos-drm exynos-drm: bound 12c10000.mixer (ops mixer_component_ops) [ 1.823898] exynos-drm exynos-drm: bound 12d00000.hdmi (ops hdmi_component_ops) [ 1.831023] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 1.837599] [drm] No driver support for vblank timestamp query. [ 1.843526] [drm] Initialized exynos 1.0.0 20110530 on minor 0 [ 1.849862] s3c-rtc 10070000.rtc: rtc disabled, re-enabling [ 1.855070] s3c-rtc 10070000.rtc: rtc core: registered s3c as rtc1 [ 1.862282] mmc_host mmc1: Bus speed (slot 0) = 44000000Hz (slot req 52000000Hz, actual 44000000HZ div = 0) [ 1.871155] mmc_host mmc1: Bus speed (slot 0) = 73333333Hz (slot req 52000000Hz, actual 36666666HZ div = 1) [ 1.880818] mmc1: new DDR MMC card at address 0001 [ 1.885866] mmcblk1: mmc1:0001 008G92 7.28 GiB [ 1.887053] max98090 1-0010: MAX98090 REVID=0x43 [ 1.889328] max98090 1-0010: use default 2.8v micbias [ 1.902840] asoc-simple-card sound: HiFi <-> 3830000.i2s mapping ok [ 1.905664] mmcblk1boot0: mmc1:0001 008G92 partition 1 4.00 MiB [ 1.911848] mmcblk1boot1: mmc1:0001 008G92 partition 2 4.00 MiB [ 1.917752] mmcblk1rpmb: mmc1:0001 008G92 partition 3 512 KiB [ 1.918365] input: gpio_keys as /devices/platform/gpio_keys/input/input0 [ 1.930920] mmcblk1: p1 p2 [ 1.946992] max77686-rtc max77686-rtc: setting system clock to 2000-01-01 01:00:20 UTC (946688420) [ 1.967835] VDD10_HDMI_1.0V: disabling [ 1.968543] vdd_g3d: disabling [ 1.969609] BUCK8_2.8V: disabling [ 1.973627] ALSA device list: [ 1.975222] #0: Odroid-U3 [ 1.978998] Waiting for root device /dev/mmcblk0p2...
[PYBOOT] [odroidu3 01:48]: Timed out waiting for "<type 'str'>":
[PYBOOT] [odroidu3 01:49]: got exception: timeout ~$off
[PYBOOT] [odroidu3 01:50]: Done.
========================================================================
Board omap5uevm-arm-multi_lpae_defconfig failure log: -------------------------------------------------
[ 57.139225] omap_i2c 48070000.i2c: controller timed out [ 58.174225] omap_i2c 48070000.i2c: controller timed out [ 59.209224] omap_i2c 48070000.i2c: controller timed out [ 59.224230] cpu cpu0: _set_opp_voltage: failed to set voltage (1060000 1060000 1060000 mV): -110 [ 60.249218] omap_i2c 48070000.i2c: controller timed out [ 61.284218] omap_i2c 48070000.i2c: controller timed out [ 62.319218] omap_i2c 48070000.i2c: controller timed out [ 63.354217] omap_i2c 48070000.i2c: controller timed out [ 63.369222] cpu cpu0: _set_opp_voltage: failed to set voltage (1250000 1250000 1250000 mV): -110 [ 63.378435] cpufreq: __target_index: Failed to change cpu frequency: -110 [ 64.409225] omap_i2c 48070000.i2c: controller timed out [ 65.444225] omap_i2c 48070000.i2c: controller timed out [ 66.479224] omap_i2c 48070000.i2c: controller timed out [ 67.514225] omap_i2c 48070000.i2c: controller timed out [ 67.529231] cpu cpu0: _set_opp_voltage: failed to set voltage (1060000 1060000 1060000 mV): -110 [ 68.554218] omap_i2c 48070000.i2c: controller timed out [ 69.589218] omap_i2c 48070000.i2c: controller timed out [ 70.624218] omap_i2c 48070000.i2c: controller timed out [ 71.659217] omap_i2c 48070000.i2c: controller timed out [ 71.674221] cpu cpu0: _set_opp_voltage: failed to set voltage (1250000 1250000 1250000 mV): -110 [ 71.683430] cpufreq: __target_index: Failed to change cpu frequency: -110 [ 72.714225] omap_i2c 48070000.i2c: controller timed out [ 73.749224] omap_i2c 48070000.i2c: controller timed out [ 74.784224] omap_i2c 48070000.i2c: controller timed out [ 75.819225] omap_i2c 48070000.i2c: controller timed out [ 75.834230] cpu cpu0: _set_opp_voltage: failed to set voltage (1060000 1060000 1060000 mV): -110 [ 76.859217] omap_i2c 48070000.i2c: controller timed out [ 77.894218] omap_i2c 48070000.i2c: controller timed out [ 78.929218] omap_i2c 48070000.i2c: controller timed out [ 79.964218] omap_i2c 48070000.i2c: controller timed out [ 79.979221] cpu cpu0: _set_opp_voltage: failed to set voltage (1250000 1250000 1250000 mV): -110 [ 79.988430] cpufreq: __target_index: Failed to change cpu frequency: -110
[PYBOOT] [omap5uevm 02:05]: Timed out waiting for "<type 'str'>": [ 81.019225] omap_i2c 48070000.i2c: controller timed out
[PYBOOT] [omap5uevm 02:06]: got exception: timeout ~$off
[PYBOOT] [omap5uevm 02:07]: Done.
========================================================================
Board omap5uevm-arm-multi_v7_defconfig failure log: -------------------------------------------------
[ 2.204069] PC is at irq_exit+0x80/0x118 [ 2.208162] LR is at irq_exit+0x60/0x118 [ 2.212261] pc : [<c03464f4>] lr : [<c03464d4>] psr: 60000193 [ 2.212261] sp : c1301f10 ip : 0000000e fp : c1302510 [ 2.224264] r10: c140e628 r9 : fa213000 r8 : ee008000 [ 2.229726] r7 : 00000001 r6 : 00000000 r5 : 00000000 r4 : ffffe000 [ 2.236548] r3 : 00000000 r2 : 00000000 r1 : c13064c0 r0 : 00000001 [ 2.243368] Flags: nZCv IRQs off FIQs on Mode SVC_32 ISA ARM Segment none [ 2.250918] Control: 10c5387d Table: 8020406a DAC: 00000051 [ 2.256926] Process swapper/0 (pid: 0, stack limit = 0xc1300220) [ 2.263208] Stack: (0xc1301f10 to 0xc1302000) [ 2.267764] 1f00: c12134dc c0385590 c1302870 c13405f8 [ 2.276315] 1f20: fa21200c c1301f50 fa212000 c03017a8 c0308780 a0000013 ffffffff c1301f84 [ 2.284870] 1f40: c1214580 c1302508 c140e628 c030c514 00000001 00000000 ea000013 f0880000 [ 2.293419] 1f60: c1300000 c13024a4 00000000 00000000 c1214580 c1302508 c140e628 c1302510 [ 2.301971] 1f80: 60000013 c1301fa0 c032b054 c0308780 a0000013 ffffffff 00000051 c030877c [ 2.310523] 1fa0: c1300000 c0379270 c1301fb4 c1301fa8 00000000 ffffffff 00000000 c1100c50 [ 2.319071] 1fc0: ffffffff ffffffff 00000000 c1100684 00000000 c11a6a30 c14105d4 c1302480 [ 2.327627] 1fe0: c11a6a2c c1307694 8020406a 412fc0f2 00000000 8020807c 00000000 00000000 [ 2.336188] [<c03464f4>] (irq_exit) from [<c0385590>] (__handle_domain_irq+0x60/0xb4) [ 2.344380] [<c0385590>] (__handle_domain_irq) from [<c03017a8>] (gic_handle_irq+0x54/0x98) [ 2.353113] [<c03017a8>] (gic_handle_irq) from [<c030c514>] (__irq_svc+0x54/0x70) [ 2.360932] Exception stack(0xc1301f50 to 0xc1301f98) [ 2.366212] 1f40: 00000001 00000000 ea000013 f0880000 [ 2.374764] 1f60: c1300000 c13024a4 00000000 00000000 c1214580 c1302508 c140e628 c1302510 [ 2.383316] 1f80: 60000013 c1301fa0 c032b054 c0308780 a0000013 ffffffff [ 2.390229] [<c030c514>] (__irq_svc) from [<c0308780>] (arch_cpu_idle+0x20/0x3c) [ 2.397966] [<c0308780>] (arch_cpu_idle) from [<c0379270>] (cpu_startup_entry+0x1bc/0x218) [ 2.406609] [<c0379270>] (cpu_startup_entry) from [<c1100c50>] (start_kernel+0x374/0x380) [ 2.415163] [<c1100c50>] (start_kernel) from [<8020807c>] (0x8020807c) [ 2.421987] Code: e3c3303f e5932000 e3120002 1a000005 (e5932004) [ 2.428361] ---[ end trace 1d24299028d06e94 ]--- [ 2.433186] Kernel panic - not syncing: Attempted to kill the idle task! [ 3.417154] SMP: failed to stop secondary CPUs [ 3.421802] ---[ end Kernel panic - not syncing: Attempted to kill the idle task!
[PYBOOT] [omap5uevm 00:46]: got exception: panic ~$off
[PYBOOT] [omap5uevm 00:47]: Done.
========================================================================
Board pi-arm-exynos_defconfig failure log: -------------------------------------------------
[ 3.218447] exynos-drm exynos-drm: fb0: frame buffer device [ 3.235125] [drm] Initialized exynos 1.0.0 20110530 on minor 0 [ 3.240172] input: gpio-keys as /devices/platform/gpio-keys/input/input2 [ 3.247634] max77686-rtc max77802-rtc: hctosys: unable to read the hardware clock [ 3.269864] vdd_1v2_2: disabling [ 3.271806] TPS65090_RAILSDCDC3: disabling [ 3.275725] TPS65090_RAILSLDO1: disabling [ 3.279686] TPS65090_RAILSLDO2: disabling [ 3.284217] ALSA device list: [ 3.286645] #0: Peach-Pi-I2S-MAX98091 [ 3.291773] EXT4-fs (mmcblk0p1): couldn't mount as ext3 due to feature incompatibilities [ 3.307304] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null) [ 3.313989] VFS: Mounted root (ext4 filesystem) readonly on device 179:1. [ 3.323151] devtmpfs: mounted [ 3.325222] Freeing unused kernel memory: [PYBOOT] [pi 00:28]: kernel: finished booting, starting userspace. 1024K (c0a00000 - c0b00000) [ 3.335313] Unhandled fault: imprecise external abort (0x1406) at 0x00000000 [ 3.340878] pgd = edbbc000 [ 3.343568] [00000000] *pgd=fb82c835 [ 3.355179] Kernel panic - not syncing: Attempted to kill init! exitcode=0x00000007 [ 3.355179] [ 3.362828] CPU: 0 PID: 1 Comm: init Not tainted 4.7.0-rc5-00028-g02184c6 #1 [ 3.369853] Hardware name: SAMSUNG EXYNOS (Flattened Device Tree) [ 3.375946] [<c010dfec>] (unwind_backtrace) from [<c010ad18>] (show_stack+0x10/0x14) [ 3.383651] [<c010ad18>] (show_stack) from [<c0326ab8>] (dump_stack+0x78/0x8c) [ 3.390854] [<c0326ab8>] (dump_stack) from [<c01968a8>] (panic+0xd8/0x250) [ 3.397707] [<c01968a8>] (panic) from [<c011e6a0>] (do_exit+0xa10/0xa34) [ 3.404383] [<c011e6a0>] (do_exit) from [<c011f27c>] (do_group_exit+0x3c/0xbc) [ 3.411585] [<c011f27c>] (do_group_exit) from [<c012875c>] (get_signal+0x220/0x5a4) [ 3.419217] [<c012875c>] (get_signal) from [<c010a460>] (do_signal+0xc4/0x418) [ 3.426418] [<c010a460>] (do_signal) from [<c010a958>] (do_work_pending+0x94/0xa4) [ 3.433965] [<c010a958>] (do_work_pending) from [<c0107714>] (slow_work_pending+0xc/0x20) [ 3.442132] ---[ end Kernel panic - not syncing: Attempted to kill init! exitcode=0x00000007 [ 3.442132]
[PYBOOT] [pi 00:29]: got exception: panic ~$off
[PYBOOT] [pi 00:30]: Done.
========================================================================
Board pi-arm-multi_lpae_defconfig failure log: -------------------------------------------------
[ 1.533267] isl29018 7-0044: No cache defaults, reading back from HW [ 1.539622] isl29018 7-0044: Failed to read 1: -6 [ 1.544206] isl29018 7-0044: regmap initialization fails: -6 [ 1.555085] NET: Registered protocol family 10 [ 1.559511] sit: IPv6 over IPv4 tunneling driver [ 1.563089] NET: Registered protocol family 17 [ 1.567096] can: controller area network core (rev 20120528 abi 9) [ 1.573287] NET: Registered protocol family 29 [ 1.577674] can: raw protocol (rev 20120528) [ 1.581923] can: broadcast manager protocol (rev 20120528 t) [ 1.587565] can: netlink gateway (rev 20130117) max_hops=1 [ 1.593287] Key type dns_resolver registered [ 1.597615] ThumbEE CPU extension supported. [ 1.601533] Registering SWP/SWPB emulation handler [ 1.611380] dwmmc_exynos 12210000.mmc: IDMAC supports 32-bit address mode. [ 1.616862] dwmmc_exynos 12210000.mmc: Using internal DMA controller. [ 1.623227] dwmmc_exynos 12210000.mmc: Version ID is 250a [ 1.628603] dwmmc_exynos 12210000.mmc: DW MMC controller at irq 70,64 bit host data width,64 deep fifo [ 1.638698] input: gpio-keys as /devices/platform/gpio-keys/input/input1 [ 1.649010] dwmmc_exynos 12210000.mmc: IDMAC supports 32-bit address mode. [ 1.654458] mmc_host mmc0: Bus speed (slot 0) = 200000000Hz (slot req 200000000Hz, actual 200000000HZ div = 0) [ 1.664646] dwmmc_exynos 12210000.mmc: Using internal DMA controller. [ 1.670825] dwmmc_exynos 12210000.mmc: Version ID is 250a [ 1.676203] dwmmc_exynos 12210000.mmc: DW MMC controller at irq 70,64 bit host data width,64 deep fifo [ 1.685926] max77686-rtc max77802-rtc: hctosys: unable to read the hardware clock [ 1.708453] Waiting for root device /dev/mmcblk0p1... [ 1.712333] mmc0: tuning execution failed: -5 [ 1.716391] mmc0: error -5 whilst initialising MMC card [ 2.583053] asix 1-1:1.0 eth0: register 'asix' at usb-xhci-hcd.2.auto-1, ASIX AX88772 USB 2.0 Ethernet, c8:b3:73:46:fb:95 [ 2.597194] dwmmc_exynos 12210000.mmc: IDMAC supports 32-bit address mode. [ 2.602651] dwmmc_exynos 12210000.mmc: Using internal DMA controller. [ 2.609024] dwmmc_exynos 12210000.mmc: Version ID is 250a [ 2.614406] dwmmc_exynos 12210000.mmc: DW MMC controller at irq 70,64 bit host data width,64 deep fifo
[PYBOOT] [pi 01:53]: Timed out waiting for "<type 'str'>":
[PYBOOT] [pi 01:54]: got exception: timeout ~$off
[PYBOOT] [pi 01:55]: Done.
========================================================================
Board pi-arm-multi_v7_defconfig failure log: -------------------------------------------------
[ 1.533327] isl29018 7-0044: No cache defaults, reading back from HW [ 1.539684] isl29018 7-0044: Failed to read 1: -6 [ 1.544264] isl29018 7-0044: regmap initialization fails: -6 [ 1.555144] NET: Registered protocol family 10 [ 1.559579] sit: IPv6 over IPv4 tunneling driver [ 1.563157] NET: Registered protocol family 17 [ 1.567162] can: controller area network core (rev 20120528 abi 9) [ 1.573354] NET: Registered protocol family 29 [ 1.577741] can: raw protocol (rev 20120528) [ 1.581990] can: broadcast manager protocol (rev 20120528 t) [ 1.587632] can: netlink gateway (rev 20130117) max_hops=1 [ 1.593354] Key type dns_resolver registered [ 1.597674] ThumbEE CPU extension supported. [ 1.601601] Registering SWP/SWPB emulation handler [ 1.611492] dwmmc_exynos 12210000.mmc: IDMAC supports 32-bit address mode. [ 1.616970] dwmmc_exynos 12210000.mmc: Using internal DMA controller. [ 1.623337] dwmmc_exynos 12210000.mmc: Version ID is 250a [ 1.628712] dwmmc_exynos 12210000.mmc: DW MMC controller at irq 70,64 bit host data width,64 deep fifo [ 1.638810] input: gpio-keys as /devices/platform/gpio-keys/input/input1 [ 1.649159] dwmmc_exynos 12210000.mmc: IDMAC supports 32-bit address mode. [ 1.654604] mmc_host mmc0: Bus speed (slot 0) = 200000000Hz (slot req 200000000Hz, actual 200000000HZ div = 0) [ 1.664787] dwmmc_exynos 12210000.mmc: Using internal DMA controller. [ 1.670970] dwmmc_exynos 12210000.mmc: Version ID is 250a [ 1.676348] dwmmc_exynos 12210000.mmc: DW MMC controller at irq 70,64 bit host data width,64 deep fifo [ 1.686084] max77686-rtc max77802-rtc: hctosys: unable to read the hardware clock [ 1.708585] Waiting for root device /dev/mmcblk0p1... [ 1.712470] mmc0: tuning execution failed: -5 [ 1.716527] mmc0: error -5 whilst initialising MMC card [ 2.583116] asix 1-1:1.0 eth0: register 'asix' at usb-xhci-hcd.2.auto-1, ASIX AX88772 USB 2.0 Ethernet, c8:b3:73:46:fb:95 [ 2.597256] dwmmc_exynos 12210000.mmc: IDMAC supports 32-bit address mode. [ 2.602718] dwmmc_exynos 12210000.mmc: Using internal DMA controller. [ 2.609090] dwmmc_exynos 12210000.mmc: Version ID is 250a [ 2.614475] dwmmc_exynos 12210000.mmc: DW MMC controller at irq 70,64 bit host data width,64 deep fifo
[PYBOOT] [pi 01:49]: Timed out waiting for "<type 'str'>":
[PYBOOT] [pi 01:50]: got exception: timeout ~$off
[PYBOOT] [pi 01:51]: Done.
========================================================================
Board wandboard-arm-imx_v6_v7_defconfig failure log: -------------------------------------------------
cute "/sbin/getty" INIT: Id "3[ 20.103123] mmcblk0: error -110 sending status command, retrying " respawning too fast: disabled f[ 20.112077] mmcblk0: error -110 sending status command, aborting or 5 minutes INIT: cannot execute "/sbin/gett[ 20.123745] mmcblk0: error -110 sending status command, retrying y" INIT: Id "5" respawning too[ 20.132575] mmcblk0: error -110 sending status command, retrying fast: disabled for 5 minutes [ 20.141433] mmcblk0: error -110 sending status command, aborting INIT: cannot execute "/sbin/getty" INIT: Id "1" respawning too[ 20.152925] mmcblk0: error -110 sending status command, retrying fast: disabled for 5 minutes [ 20.161973] mmcblk0: error -110 sending status command, retrying [ 20.170753] mmcblk0: error -110 sending status command, aborting [ 20.181843] mmcblk0: error -110 sending status command, retrying [ 20.190302] mmcblk0: error -110 sending status command, retrying [ 20.198766] mmcblk0: error -110 sending status command, aborting INIT: cannot execute "/sbin/getty" INIT: cannot execute "/sbin/getty" INIT: cannot execute "/sbin[ 20.215524] mmcblk0: error -110 sending status command, retrying /getty" INIT: Id "4" respawnin[ 20.224312] mmcblk0: error -110 sending status command, retrying g too fast: disabled for 5 minute[ 20.233166] mmcblk0: error -110 sending status command, aborting s INIT: cannot execute "/sbin/getty" I[ 20.244979] mmcblk0: error -110 sending status command, retrying NIT: Id "6" respawning too fast: [ 20.253756] mmcblk0: error -110 sending status command, retrying disabled for 5 minutes [ 20.262661] mmcblk0: error -110 sending status command, aborting INIT: cannot execute "/sbin/getty" INIT: Id "S1" respawning too fast: disabled for 5 minutes INIT: no more processes left in this runlevel [ 50.044717] random: nonblocking pool is initialized
[PYBOOT] [wandboard 02:56]: Timed out waiting for "<type 'str'>":
[PYBOOT] [wandboard 02:57]: got exception: timeout ~$off
[PYBOOT] [wandboard 02:58]: Done.
kernel-build-reports@lists.linaro.org
-
Olof's autobooter