Failed boards:

bbb multi_v7_defconfig : FAILED 1:19.01 panda multi_v7_defconfig : FAILED 1:35.58

Successful boards:

apc vt8500_v6_v7_defconfig : passed 1:19.22 arndale exynos_defconfig : passed 1:10.77 bbb omap2plus_defconfig : passed 1:41.42 beaver tegra_defconfig : passed 0:55.60 beaver multi_v7_defconfig : passed 0:54.63 capri bcm_defconfig : passed 0:45.56 capri multi_v7_defconfig : passed 0:44.21 cubie sunxi_defconfig : passed 0:51.76 cubie multi_v7_defconfig : passed 0:54.11 cubie2 sunxi_defconfig : passed 0:49.90 cubie2 multi_v7_defconfig : passed 1:01.72 cubie2 multi_lpae_defconfig : passed 0:50.00 cubox dove_defconfig : warnings 1:15.88 dalmore tegra_defconfig : passed 1:24.47 dalmore multi_v7_defconfig : passed 1:20.65 dalmore multi_lpae_defconfig : passed 1:16.40 panda omap2plus_defconfig : passed 1:17.62 sama5 sama5_defconfig : passed 1:55.91 seaboard tegra_defconfig : passed 1:06.88 seaboard multi_v7_defconfig : passed 1:09.32 snow exynos_defconfig : passed 1:22.57 snowball u8500_defconfig : passed 2:18.31 snowball multi_v7_defconfig : passed 2:44.99 trimslice tegra_defconfig : passed 1:00.01 trimslice multi_v7_defconfig : passed 1:26.16 wandboard imx_v6_v7_defconfig : passed 0:58.03 wandboard multi_v7_defconfig : passed 1:06.87

Board legend is available at http://arm-soc.lixom.net/boards.html

Last entries of failed logs below:

========================================================================

Board bbb-multi_v7_defconfig failure log: -------------------------------------------------

Using cpsw device TFTP from server 172.16.1.3; our IP address is 172.16.1.121 Filename 'arm-soc/v3.13-rc5-1047-g5e59dd4/multi_v7_defconfig/zImage'. Load address: 0x80200000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ##################################### 1.1 MiB/s done Bytes transferred = 4350736 (426310 hex) U-Boot# setenv serverip 172.16.1.3 setenv serverip 172.16.1.3 U-Boot# tftp 0x81f00000 arm-soc/v3.13-rc5-1047-g5e59dd4/multi_v7_defconfig/dtbs/am335x-boneblack.dtb tftp 0x81f00000 arm-soc/v3.13-rc5-1047-g5e59dd4/multi_v7_defconfig/dtbs/am335x-boneblack.dtb link up on port 0, speed 100, full duplex Using cpsw device TFTP from server 172.16.1.3; our IP address is 172.16.1.121 Filename 'arm-soc/v3.13-rc5-1047-g5e59dd4/multi_v7_defconfig/dtbs/am335x-boneblack.dtb'. Load address: 0x81f00000 Loading: *## 260.7 KiB/s done Bytes transferred = 17911 (45f7 hex) U-Boot# setenv bootargs console=ttyO0,115200 root=/dev/mmcblk0p2 rootwait rw debug earlyprintk setenv bootargs console=ttyO0,115200 root=/dev/mmcblk0p2 rootwait rw debug earlyprintk U-Boot# printenv bootargs printenv bootargs bootargs=console=ttyO0,115200 root=/dev/mmcblk0p2 rootwait rw debug earlyprintk U-Boot# bootz 0x80200000 - 0x81f00000 bootz 0x80200000 - 0x81f00000 ## Flattened Device Tree blob at 81f00000 Booting using the fdt blob at 0x81f00000 Using Device Tree in place at 81f00000, end 81f075f6

Starting kernel ...

~$off # PYBOOT: Exception: timeout

========================================================================

Board panda-multi_v7_defconfig failure log: -------------------------------------------------

[ 1.415252] omap-dma-engine 4a056000.dma-controller: freeing channel for 62 [ 1.422607] platform 4809c000.mmc: Driver omap_hsmmc requests probe deferral [ 1.430023] omap_hsmmc 480d5000.mmc: could not find pctldev for node /ocp/pinmux@4a100040/pinmux_wl12xx_pins, deferring probe [ 1.441925] platform 480d5000.mmc: Driver omap_hsmmc requests probe deferral [ 1.449584] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.456359] usbcore: registered new interface driver usbhid [ 1.462219] usbhid: USB HID core driver [ 1.469177] TCP: cubic registered [ 1.472656] NET: Registered protocol family 17 [ 1.477508] Key type dns_resolver registered [ 1.482391] Power Management for TI OMAP4+ devices. [ 1.487548] Power Management for TI OMAP4. [ 1.491851] OMAP4 PM: u-boot >= v2012.07 is required for full PM support [ 1.498992] Registering SWP/SWPB emulation handler [ 1.504821] reg-fixed-voltage wl12xx_vmmc.10: could not find pctldev for node /ocp/pinmux@4a100040/pinmux_wl12xx_gpio, deferring probe [ 1.517608] platform wl12xx_vmmc.10: Driver reg-fixed-voltage requests probe deferral [ 1.526245] omap_i2c 48070000.i2c: could not find pctldev for node /ocp/pinmux@4a100040/pinmux_i2c1_pins, deferring probe [ 1.537780] platform 48070000.i2c: Driver omap_i2c requests probe deferral [ 1.537780] omap_i2c 48072000.i2c: could not find pctldev for node /ocp/pinmux@4a100040/pinmux_i2c2_pins, deferring probe [ 1.556793] platform 48072000.i2c: Driver omap_i2c requests probe deferral [ 1.564300] omap_i2c 48060000.i2c: could not find pctldev for node /ocp/pinmux@4a100040/pinmux_i2c3_pins, deferring probe [ 1.575805] platform 48060000.i2c: Driver omap_i2c requests probe deferral [ 1.583038] omap_i2c 48350000.i2c: could not find pctldev for node /ocp/pinmux@4a100040/pinmux_i2c4_pins, deferring probe [ 1.594848] platform 48350000.i2c: Driver omap_i2c requests probe deferral [ 1.602600] omap-dma-engine 4a056000.dma-controller: allocating channel for 62 [ 1.610260] omap-dma-engine 4a056000.dma-controller: allocating channel for 61 [ 1.617858] omap_hsmmc 4809c000.mmc: vmmc regulator missing [ 1.623748] omap-dma-engine 4a056000.dma-controller: freeing channel for 61 [ 1.628845] omap-dma-engine 4a056000.dma-controller: freeing channel for 62 [ 1.638397] platform 4809c000.mmc: Driver omap_hsmmc requests probe deferral [ 1.638732] omap_hsmmc 480d5000.mmc: could not find pctldev for node /ocp/pinmux@4a100040/pinmux_wl12xx_pins, deferring probe [ 1.657989] platform 480d5000.mmc: Driver omap_hsmmc requests probe deferral [ 1.665527] /home/build/work/batch/drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 1.674407] spear_cpufreq: Invalid cpufreq_tbl [ 1.679046] ALSA device list: [ 1.679046] No soundcards found. [ 1.686370] omap_uart 48020000.serial: no wakeirq for uart2 [ 1.692230] Waiting for root device /dev/mmcblk0p2... ~$off # PYBOOT: Exception: timeout