Tree/Branch: arm-soc/to-build Git describe: v3.11-rc5-457-gc6be7bb3 Commit: c6be7bb375 Merge branch 'next/soc' into for-next

arm-omap2plus_defconfig ----------------------- 3530overo PASS: 0 min 25.1 sec 4460panda-es FAIL: 0 min 0.0 sec 3730storm PASS: 0 min 24.7 sec 3730xm FAIL: 0 min 0.0 sec 3530beagle PASS: 0 min 58.8 sec 4430panda PASS: 1 min 7.1 sec am335xboneb PASS: 0 min 27.8 sec

======================================================================

arm-omap2plus_defconfig -----------------------

4460panda-es: FAIL: last 24 lines of boot log: ----------------------------------------------

reading uEnv.txt 435 bytes read in 3 ms (141.6 KiB/s) Importing environment from mmc0 ... Running uenvcmd ... (Re)start USB... USB0: USB EHCI 1.00 scanning bus 0 for devices... 3 USB Device(s) found scanning usb for storage devices... 0 Storage Device(s) found scanning usb for ethernet devices... 1 Ethernet Device(s) found Waiting for Ethernet connection... done. BOOTP broadcast 1 BOOTP broadcast 2 DHCP client bound to address 192.168.1.163 Using sms0 device TFTP from server 192.168.1.2; our IP address is 192.168.1.163 Filename 'omap2/zImage'. Load address: 0x82000000 Loading: *################################################################# ################################################################# ################################################################# #########################################################~$off # PYBOOT: Exception: ERROR: Timeout waiting for command: if test -n ${preboot}; then run preboot; fi. # PYBOOT: Time: 0.00 seconds. # PYBOOT: Result: FAIL

3730xm: FAIL: last 24 lines of boot log: ----------------------------------------

[ 2.741882] usb usb1: SerialNumber: ehci-omap.0 [ 2.748229] mmc0: new high speed SDHC card at address 1234 [ 2.761871] hub 1-0:1.0: USB hub found [ 2.766082] hub 1-0:1.0: 3 ports detected [ 2.774444] mmcblk0: mmc0:1234 SA04G 3.63 GiB [ 2.787902] mmcblk0: p1 p2 [ 2.795898] input: gpio-keys as /devices/platform/gpio-keys/input/input1 [ 2.809326] twl_rtc twl_rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800) [ 3.083435] usb 1-2: new high-speed USB device number 2 using ehci-omap [ 3.234344] usb 1-2: New USB device found, idVendor=0424, idProduct=9514 [ 3.241424] usb 1-2: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 3.253082] hub 1-2:1.0: USB hub found [ 3.257629] hub 1-2:1.0: 5 ports detected [ 3.543945] usb 1-2.1: new high-speed USB device number 3 using ehci-omap [ 3.674682] usb 1-2.1: New USB device found, idVendor=0424, idProduct=ec00 [ 3.681915] usb 1-2.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 3.695068] smsc95xx v1.0.4 [ 3.789459] smsc95xx 1-2.1:1.0 eth0: register 'smsc95xx' at usb-ehci-omap.0-2.1, smsc95xx USB 2.0 Ethernet, 2a:0a:61:5e:d4:ca [ 3.905944] smsc95xx 1-2.1:1.0 eth0: hardware isn't capable of remote wakeup [ 5.316741] smsc95xx 1-2.1:1.0 eth0: link up, 100Mbps, half-duplex, lpa 0x40A1 [ 5.353363] Sending DHCP requests .~$off # PYBOOT: Exception: ERROR: Timeout waiting for command: if test -n ${preboot}; then run preboot; fi. # PYBOOT: Time: 0.00 seconds. # PYBOOT: Result: FAIL