Tree/Branch: arm-soc/to-build Git describe: v3.11-rc5-543-g440098c Commit: 440098c034 Merge branch 'next/soc' into for-next

arm-multi_v7_defconfig ---------------------- cubie PASS: 0 min 15.8 sec 4430panda PASS: 1 min 3.1 sec

arm-exynos_defconfig -------------------- arndale FAIL: 0 min 0.0 sec

arm-omap2plus_defconfig ----------------------- 3530overo PASS: 0 min 24.7 sec 4460panda-es PASS: 1 min 21.8 sec 3730storm PASS: 0 min 24.6 sec 3730xm FAIL: 0 min 0.0 sec 3530beagle PASS: 1 min 0.1 sec 4430panda PASS: 1 min 6.8 sec am335xboneb PASS: 0 min 27.8 sec

======================================================================

arm-exynos_defconfig --------------------

arndale: FAIL: last 24 lines of boot log: -----------------------------------------

U-Boot 2013.01.-rc1-dirty (Jun 28 2013 - 07:14:48) for ARNDALE5250 arm-linux-gnueabi-gcc (Ubuntu/Linaro 4.7.2-1ubuntu1) 4.7.2 GNU ld (GNU Binutils for Ubuntu) 2.22.90.20120919 ARNDALE5250 # setenv initenv "'if test -n ${loadbootenv}; then if run loadbootenv; then run importbootenv; fi; fi;'" setenv initenv "'if test -n ${loadbootenv}; then if run loadbootenv; then run importbootenv; fi; fi;'" ARNDALE5250 # if test -n ${initenv}; then run initenv; fi if test -n ${initenv}; then run initenv; fi ARNDALE5250 # if test -n ${preboot}; then run preboot; fi if test -n ${preboot}; then run preboot; fi (Re)start USB... USB0: USB EHCI 1.00 scanning bus 0 for devices... 1 USB Device(s) found scanning usb for storage devices... 0 Storage Device(s) found scanning usb for ethernet devices... 0 Ethernet Device(s) found ARNDALE5250 #setenv autoload no; setenv autoboot no setenv autoload no; setenv autoboot no ARNDALE5250 # dhcp dhcp No ethernet found. ARNDALE5250 # ~$off # PYBOOT: Exception: u-boot: ERROR: timed-out getting DHCP address. # PYBOOT: Time: 0.00 seconds. # PYBOOT: Result: FAIL

======================================================================

arm-omap2plus_defconfig -----------------------

3730xm: FAIL: last 24 lines of boot log: ----------------------------------------

[ 3.683197] usb 1-2.1: New USB device found, idVendor=0424, idProduct=ec00 [ 3.690429] usb 1-2.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 3.703735] smsc95xx v1.0.4 [ 3.798461] smsc95xx 1-2.1:1.0 eth0: register 'smsc95xx' at usb-ehci-omap.0-2.1, smsc95xx USB 2.0 Ethernet, 4e:a8:a8:a7:97:00 [ 3.894836] smsc95xx 1-2.1:1.0 eth0: hardware isn't capable of remote wakeup [ 5.306030] smsc95xx 1-2.1:1.0 eth0: link up, 100Mbps, half-duplex, lpa 0x40A1 [ 5.342254] Sending DHCP requests .., OK [ 8.372863] IP-Config: Got DHCP answer from 192.168.1.254, my address is 192.168.1.229 [ 8.381835] IP-Config: Complete: [ 8.385314] device=eth0, hwaddr=4e:a8:a8:a7:97:00, ipaddr=192.168.1.229, mask=255.255.255.0, gw=192.168.1.254 [ 8.396240] host=192.168.1.229, domain=lan, nis-domain=(none) [ 8.402770] bootserver=192.168.1.254, rootserver=192.168.1.2, rootpath= [ 8.409973] nameserver0=192.168.1.254 [ 8.466125] VFS: Mounted root (nfs filesystem) on device 0:12. [ 8.474792] devtmpfs: mounted [ 8.478881] Freeing unused kernel memory: 380K (c0723000 - c0782000) modprobe: FATAL: Could not load /lib/modules/3.11.0-rc4/modules.dep: No such file or directory

INIT: version 2.88 booting Using makefile-style concurrent boot in runlevel S. ~$off # PYBOOT: Exception: ERROR: Timeout waiting for command: if test -n ${preboot}; then run preboot; fi. # PYBOOT: Time: 0.00 seconds. # PYBOOT: Result: FAIL