Failed boards:
cubie2 sunxi_defconfig : FAILED 1:20.74 cubie2 multi_lpae_defconfig : FAILED 0:58.69 cubox dove_defconfig : BUILD FAILED hummingboard imx_v6_v7_defconfig : FAILED 1:06.67 hummingboard multi_v7_defconfig : FAILED 1:01.42 snowball multi_v7_defconfig : FAILED 1:09.55 wandboard imx_v6_v7_defconfig : FAILED 1:02.11 wandboard multi_v7_defconfig : FAILED 1:04.84
Successful boards:
apc vt8500_v6_v7_defconfig : passed 1:16.93 arndale exynos_defconfig : passed 1:06.97 bbb omap2plus_defconfig : passed 1:37.56 bbb multi_v7_defconfig : passed 1:18.94 beaver tegra_defconfig : passed 0:56.16 beaver multi_v7_defconfig : passed 0:48.10 capri bcm_defconfig : passed 0:42.32 capri multi_v7_defconfig : passed 0:44.05 cubie sunxi_defconfig : passed 1:07.33 cubie multi_v7_defconfig : passed 0:57.47 cubie2 multi_v7_defconfig : passed 1:01.97 dalmore tegra_defconfig : passed 1:24.13 dalmore multi_v7_defconfig : passed 1:19.57 dalmore multi_lpae_defconfig : passed 1:16.61 omap5uevm omap2plus_defconfig : warnings 1:04.26 omap5uevm multi_v7_defconfig : warnings 1:42.65 omap5uevm multi_lpae_defconfig : warnings 1:40.56 panda omap2plus_defconfig : warnings 1:16.43 panda multi_v7_defconfig : passed 3:01.27 sama5 sama5_defconfig : passed 1:54.32 seaboard tegra_defconfig : passed 0:59.75 seaboard multi_v7_defconfig : passed 1:04.72 snow exynos_defconfig : passed 1:32.27 snowball u8500_defconfig : passed 2:01.51 trimslice tegra_defconfig : passed 1:03.39 trimslice multi_v7_defconfig : passed 1:01.03
Offline boards:
Board legend is available at http://arm-soc.lixom.net/boards.html
Last entries of failed logs below:
========================================================================
Board cubie2-multi_lpae_defconfig failure log: -------------------------------------------------
sun7i# tftp 0x40008000 next/next-20140325/multi_lpae_defconfig/zImage tftp 0x40008000 next/next-20140325/multi_lpae_defconfig/zImage Using emac device TFTP from server 172.16.1.3; our IP address is 172.16.1.158 Filename 'next/next-20140325/multi_lpae_defconfig/zImage'. Load address: 0x40008000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ###################################################### 3.9 MiB/s done Bytes transferred = 4595424 (461ee0 hex) sun7i# setenv serverip 172.16.1.3 setenv serverip 172.16.1.3 sun7i# tftp 0x41000000 next/next-20140325/multi_lpae_defconfig/dtbs/sun7i-a20-cubieboard2.dtb tftp 0x41000000 next/next-20140325/multi_lpae_defconfig/dtbs/sun7i-a20-cubieboard2.dtb Using emac device TFTP from server 172.16.1.3; our IP address is 172.16.1.158 Filename 'next/next-20140325/multi_lpae_defconfig/dtbs/sun7i-a20-cubieboard2.dtb'. Load address: 0x41000000 Loading: *## 710.9 KiB/s done Bytes transferred = 18209 (4721 hex) sun7i# printenv bootargs printenv bootargs bootargs=console=ttyS0,115200n8 root=/dev/nfs rootwait rw nfsroot=172.16.1.7:/work/nfsroot/cubie2 ip=dhcp sun7i# bootz 0x40008000 - 0x41000000 bootz 0x40008000 - 0x41000000 Kernel image @ 0x40008000 [ 0x000000 - 0x461ee0 ] ## Flattened Device Tree blob at 41000000 Booting using the fdt blob at 0x41000000 Loading Device Tree to 40ff8000, end 40fff720 ... OK
Starting kernel ...
~$off # PYBOOT: Exception: timeout
========================================================================
Board cubie2-sunxi_defconfig failure log: -------------------------------------------------
[ 0.077051] platform usb1-vbus.3: Driver reg-fixed-voltage requests probe deferral [ 0.077071] reg-fixed-voltage usb2-vbus.4: could not find pctldev for node /soc@01c00000/pinctrl@01c20800/usb2_vbus_pin@0, deferring probe [ 0.077084] platform usb2-vbus.4: Driver reg-fixed-voltage requests probe deferral [ 0.078027] Switched to clocksource timer [ 0.081761] Clockevents: could not switch to one-shot mode: dummy_timer is not functional. [ 0.081777] Could not switch to high resolution mode on CPU 0 [ 0.085080] NET: Registered protocol family 2 [ 0.085559] TCP established hash table entries: 8192 (order: 3, 32768 bytes) [ 0.085646] TCP bind hash table entries: 8192 (order: 4, 65536 bytes) [ 0.085769] TCP: Hash tables configured (established 8192 bind 8192) [ 0.085852] TCP: reno registered [ 0.085866] UDP hash table entries: 512 (order: 2, 16384 bytes) [ 0.085922] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) [ 0.086130] NET: Registered protocol family 1 [ 0.086524] RPC: Registered named UNIX socket transport module. [ 0.086540] RPC: Registered udp transport module. [ 0.086546] RPC: Registered tcp transport module. [ 0.086552] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.087516] futex hash table entries: 512 (order: 3, 32768 bytes) [ 0.088003] bounce pool size: 64 pages [ 0.095831] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 0.095849] io scheduler noop registered [ 0.095855] io scheduler deadline registered [ 0.096032] io scheduler cfq registered (default) [ 0.097644] sunxi-pinctrl 1c20800.pinctrl: initialized sunXi PIO driver [ 0.139117] Serial: 8250/16550 driver, 8 ports, IRQ sharing disabled [ 0.141520] console [ttyS0] disabled [ 0.161673] 1c28000.serial: ttyS0 at MMIO 0x1c28000 (irq = 33, base_baud = 1500000) is a U6_16550A [ 0.658364] console [ttyS0] enabled [ 0.663050] mousedev: PS/2 mouse device common for all mice [ 0.668897] i2c /dev entries driver [ 0.673759] sunxi-wdt 1c20c90.watchdog: Watchdog enabled (timeout=16 sec, nowayout=0) [ 0.682714] TCP: cubic registered [ 0.686033] NET: Registered protocol family 17 [ 0.690558] Registering SWP/SWPB emulation handler [ 0.696305] ahci-5v: 5000 mV [ 0.699513] usb1-vbus: 5000 mV [ 0.702947] usb2-vbus: 5000 mV ~$off # PYBOOT: Exception: timeout
========================================================================
Board hummingboard-imx_v6_v7_defconfig failure log: -------------------------------------------------
tftp 0x10800000 next/next-20140325/imx_v6_v7_defconfig/zImage Using FEC device TFTP from server 172.16.1.3; our IP address is 172.16.1.162 Filename 'next/next-20140325/imx_v6_v7_defconfig/zImage'. Load address: 0x10800000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ############################### 1.9 MiB/s done Bytes transferred = 5223440 (4fb410 hex) C1 U-Boot > setenv serverip 172.16.1.3 setenv serverip 172.16.1.3 C1 U-Boot >tftp 0x11000000 next/next-20140325/imx_v6_v7_defconfig/dtbs/imx6dl-hummingboard.dtb tftp 0x11000000 next/next-20140325/imx_v6_v7_defconfig/dtbs/imx6dl-hummingboard.dtb Using FEC device TFTP from server 172.16.1.3; our IP address is 172.16.1.162 Filename 'next/next-20140325/imx_v6_v7_defconfig/dtbs/imx6dl-hummingboard.dtb'. Load address: 0x11000000 Loading: *## 1.7 MiB/s done Bytes transferred = 25988 (6584 hex) C1 U-Boot > printenv bootargs printenv bootargs bootargs=console=ttymxc0,115200 root=/dev/mmcblk0p2 rootwait debug earlyprintk C1 U-Boot > bootz 0x10800000 - 0x11000000 bootz 0x10800000 - 0x11000000 Kernel image @ 0x10800000 [ 0x000000 - 0x4fb410 ] ## Flattened Device Tree blob at 11000000 Booting using the fdt blob at 0x11000000 Using Device Tree in place at 11000000, end 11009583
Starting kernel ...
~$off # PYBOOT: Exception: timeout
========================================================================
Board hummingboard-multi_v7_defconfig failure log: -------------------------------------------------
C1 U-Boot >tftp 0x10800000 next/next-20140325/multi_v7_defconfig/zImage tftp 0x10800000 next/next-20140325/multi_v7_defconfig/zImage Using FEC device TFTP from server 172.16.1.3; our IP address is 172.16.1.162 Filename 'next/next-20140325/multi_v7_defconfig/zImage'. Load address: 0x10800000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# #################################################### 1.9 MiB/s done Bytes transferred = 4570072 (45bbd8 hex) C1 U-Boot > setenv serverip 172.16.1.3 setenv serverip 172.16.1.3 C1 U-Boot >tftp 0x11000000 next/next-20140325/multi_v7_defconfig/dtbs/imx6dl-hummingboard.dtb tftp 0x11000000 next/next-20140325/multi_v7_defconfig/dtbs/imx6dl-hummingboard.dtb Using FEC device TFTP from server 172.16.1.3; our IP address is 172.16.1.162 Filename 'next/next-20140325/multi_v7_defconfig/dtbs/imx6dl-hummingboard.dtb'. Load address: 0x11000000 Loading: *## 746.1 KiB/s done Bytes transferred = 25988 (6584 hex) C1 U-Boot > printenv bootargs printenv bootargs bootargs=console=ttymxc0,115200 root=/dev/mmcblk0p2 rootwait debug earlyprintk C1 U-Boot >bootz 0x10800000 - 0x11000000 bootz 0x10800000 - 0x11000000 Kernel image @ 0x10800000 [ 0x000000 - 0x45bbd8 ] ## Flattened Device Tree blob at 11000000 Booting using the fdt blob at 0x11000000 Using Device Tree in place at 11000000, end 11009583
Starting kernel ...
Щ·Ûr¶dMÓêÀ@@C@€ôR»ØÀc qÈR`ÀXÀ%€ ÚcÀ¡ÀD@`ÛØ%XÀóúÓXÔtÒ%[@hI €ß`äH,[ÞÚ`ÐÈØr·š³þ$à$¿À%ÐØØ!æPôf8ÒÈ0xeÐÒÀÚR@RP@mÂP!À%ÒÄ1Ò€$ò0Òp$€÷àÚÒÀÚ-ðâÒ!ÈøÐÊÂÐPpððÒð¿ÚÐÒÚÒÀÛÐÀj¢!òmÒŒüÈ~$off # PYBOOT: Exception: timeout
========================================================================
Board snowball-multi_v7_defconfig failure log: -------------------------------------------------
BOOTP broadcast 1 *** Unhandled DHCP Option in OFFER/ACK: 28 *** Unhandled DHCP Option in OFFER/ACK: 28 DHCP client bound to address 172.16.1.128 U8500 $ setenv serverip 172.16.1.3 setenv serverip 172.16.1.3 U8500 $ tftp 0x00100000 tmp/snowball-ouUGwb/tmpiuPmON-uImage tftp 0x00100000 tmp/snowball-ouUGwb/tmpiuPmON-uImage smc911x: detected LAN9221 controller smc911x: phy initialized smc911x: MAC 08:00:08:1e:0f:44 Using smc911x-0 device TFTP from server 172.16.1.3; our IP address is 172.16.1.128 Filename 'tmp/snowball-ouUGwb/tmpiuPmON-uImage'. Load address: 0x100000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ####################################################### done Bytes transferred = 4611385 (465d39 hex) U8500 $ printenv bootargs printenv bootargs bootargs=console=ttyAMA2,115200 root=/dev/mmcblk0p4 rootwait rw debug earlyprintk U8500 $ bootm 0x00100000 bootm 0x00100000 ## Booting kernel from Legacy Image at 00100000 ... Image Name: Linux Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 4611321 Bytes = 4.4 MB Load Address: 00008000 Entry Point: 00008000 Loading Kernel Image ... OK OK
Starting kernel ...
~$off # PYBOOT: Exception: timeout
========================================================================
Board wandboard-imx_v6_v7_defconfig failure log: -------------------------------------------------
tftp 0x10800000 next/next-20140325/imx_v6_v7_defconfig/zImage Using FEC device TFTP from server 172.16.1.3; our IP address is 172.16.1.159 Filename 'next/next-20140325/imx_v6_v7_defconfig/zImage'. Load address: 0x10800000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ############################### 5.7 MiB/s done Bytes transferred = 5223440 (4fb410 hex) => setenv serverip 172.16.1.3 setenv serverip 172.16.1.3 => tftp 0x11000000 next/next-20140325/imx_v6_v7_defconfig/dtbs/imx6q-wandboard.dtb tftp 0x11000000 next/next-20140325/imx_v6_v7_defconfig/dtbs/imx6q-wandboard.dtb Using FEC device TFTP from server 172.16.1.3; our IP address is 172.16.1.159 Filename 'next/next-20140325/imx_v6_v7_defconfig/dtbs/imx6q-wandboard.dtb'. Load address: 0x11000000 Loading: *### 4.7 MiB/s done Bytes transferred = 29426 (72f2 hex) => printenv bootargs printenv bootargs bootargs=console=ttymxc0,115200 root=/dev/mmcblk0p2 rootwait debug => bootz 0x10800000 - 0x11000000 bootz 0x10800000 - 0x11000000 Kernel image @ 0x10800000 [ 0x000000 - 0x4fb410 ] ## Flattened Device Tree blob at 11000000 Booting using the fdt blob at 0x11000000 Using Device Tree in place at 11000000, end 1100a2f1
Starting kernel ...
~$off # PYBOOT: Exception: timeout
========================================================================
Board wandboard-multi_v7_defconfig failure log: -------------------------------------------------
tftp 0x10800000 next/next-20140325/multi_v7_defconfig/zImage Using FEC device TFTP from server 172.16.1.3; our IP address is 172.16.1.159 Filename 'next/next-20140325/multi_v7_defconfig/zImage'. Load address: 0x10800000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# #################################################### 6 MiB/s done Bytes transferred = 4570072 (45bbd8 hex) => setenv serverip 172.16.1.3 setenv serverip 172.16.1.3 => tftp 0x11000000 next/next-20140325/multi_v7_defconfig/dtbs/imx6q-wandboard.dtb tftp 0x11000000 next/next-20140325/multi_v7_defconfig/dtbs/imx6q-wandboard.dtb Using FEC device TFTP from server 172.16.1.3; our IP address is 172.16.1.159 Filename 'next/next-20140325/multi_v7_defconfig/dtbs/imx6q-wandboard.dtb'. Load address: 0x11000000 Loading: *### 1 MiB/s done Bytes transferred = 29426 (72f2 hex) => printenv bootargs printenv bootargs bootargs=console=ttymxc0,115200 root=/dev/mmcblk0p2 rootwait debug => bootz 0x10800000 - 0x11000000 bootz 0x10800000 - 0x11000000 Kernel image @ 0x10800000 [ 0x000000 - 0x45bbd8 ] ## Flattened Device Tree blob at 11000000 Booting using the fdt blob at 0x11000000 Using Device Tree in place at 11000000, end 1100a2f1
Starting kernel ...
node: wandboard status: on ~$off # PYBOOT: Exception: timeout
kernel-build-reports@lists.linaro.org