mainline boot: 9 passed 6 failed (mainline/v3.12-rc4-29-g0e7a3ed) - Kernel-build-reports

8 Oct 2013


      arndale             :	passed	0:50.84
    bbb                 :	FAILED	1:02.84
    beaver              :	FAILED	0:41.53
    multi-beaver        :	passed	0:38.96
    cubie2              :	passed	1:13.14
    cubie               :	passed	1:02.63
    cubox               :	passed	0:55.09
    panda               :	FAILED	0:50.55
    multi-panda         :	passed	0:48.13
    sama5               :	FAILED	0:50.15
    snowball            :	FAILED	0:47.38
    multi-snowball      :	passed	0:52.81
    multi-trimslice     :	passed	0:45.60
    wandboard           :	FAILED	0:39.67
    multi-wandboard     :	passed	0:27.77
Board legend:
Board               :	System                 SoC                  Defconfig
arndale             :	InSignal ArndaleBoard  Samsung Exynos 5250  exynos_defconfig
    bbb                 :	BeagleBone Black       TI Sitara AM3359     omap2plus_defconfig
    beaver              :	Nvidia Beaver          Nvidia Tegra 30      tegra_defconfig
    multi-beaver        :	                                            multi_v7_defconfig
    cubie               :	Cubieboard             Allwinner A10        multi_v7_defconfig
    cubie2              :	Cubieboard 2           Allwinner A20        multi_v7_defconfig
    cubox               :	SolidRun Cubox         Marvell 88AP510      dove_defconfig
    multi-trimslice     :	CompuLab TrimSlice     Nvidia Tegra 20      multi_v7_defconfig
    panda               :	TI PandaBoard ES       TI OMAP4460          omap2plus_defconfig
    multi-panda         :	                                            multi_v7_defconfig
    sama5               :	Atmel SAMA5 devboard   Atmel SAMA5D35       sama5_defconfig
    snowball            :	CALAO Snowball         ST-Ericsson A9500    u8500_defconfig
    multi-snowball      :	                                            multi_v7_defconfig
    wandboard           :	Wandboard              Freescale i.MX6 Quad imx_v6_v7_defconfig
    multi-wandboard     :	                                            multi_v7_defconfig
Last entries of failed logs below:
========================================================================
Board bbb failure log:
    -------------------------------------------------
stderr=serial
stdin=serial
stdout=serial
usbnet_devaddr=bc:6a:29:7a:42:a8
vendor=ti
ver=U-Boot 2013.04-00017-g5c4fa11 (May 03 2013 - 10:48:32)
Environment size: 4207/131068 bytes
U-Boot# setenv bootargs 'console=ttyO0,115200 root=/dev/nfs rootwait rw nfsroot=172.16.1.7:/work/nfsroot/bbb ip=dhcp'
setenv bootargs 'console=ttyO0,115200 root=/dev/nfs rootwait rw nfsroot=172.16.1.7:/work/nfsroot/bbb ip=dhcp'
U-Boot# printenv bootargs
printenv bootargs
bootargs=console=ttyO0,115200 root=/dev/nfs rootwait rw nfsroot=172.16.1.7:/work/nfsroot/bbb ip=dhcp
U-Boot# tftpboot 0x80000000 172.16.1.4:/srv/tftp/mainline/v3.12-rc4-29-g0e7a3ed/uImage.omap
tftpboot 0x80000000 172.16.1.4:/srv/tftp/mainline/v3.12-rc4-29-g0e7a3ed/uImage.omap
link up on port 0, speed 100, full duplex
Using cpsw device
TFTP from server 172.16.1.4; our IP address is 172.16.1.127
Filename '/srv/tftp/mainline/v3.12-rc4-29-g0e7a3ed/uImage.omap'.
Load address: 0x80000000
Loading: *#
     15.6 KiB/s
done
Bytes transferred = 64 (40 hex)
U-Boot# tftpboot 0x81000000 172.16.1.4:/srv/tftp/mainline/v3.12-rc4-29-g0e7a3ed/am335x-boneblack.dtb
tftpboot 0x81000000 172.16.1.4:/srv/tftp/mainline/v3.12-rc4-29-g0e7a3ed/am335x-boneblack.dtb
link up on port 0, speed 100, full duplex
Using cpsw device
TFTP from server 172.16.1.4; our IP address is 172.16.1.127
Filename '/srv/tftp/mainline/v3.12-rc4-29-g0e7a3ed/am335x-boneblack.dtb'.
Load address: 0x81000000
Loading: *###
     546.9 KiB/s
done
Bytes transferred = 14011 (36bb hex)
U-Boot# bootm 0x80000000 - 0x81000000
bootm 0x80000000 - 0x81000000
Wrong Image Format for bootm command
ERROR: can't get kernel image!
U-Boot# ~$off
========================================================================
Board beaver failure log:
    -------------------------------------------------
dnsip=172.16.1.1
ethact=asx0
fdt_addr_r=0x82000000
gatewayip=172.16.1.1
initrd_high=0xffffffff
ipaddr=172.16.1.114
kernel_addr_r=0x81000000
loadaddr=0x80408000
mmc_boot=setenv devtype mmc; if mmc dev ${devnum}; then run scan_boot; fi
netmask=255.255.255.0
ramdisk_addr_r=0x82100000
rootpart=1
scan_boot=echo Scanning ${devtype} ${devnum}...; for prefix in ${boot_prefixes}; do for script in ${boot_scripts}; do run script_boot; done; done;
script_boot=if load ${devtype} ${devnum}:${rootpart} ${scriptaddr} ${prefix}${script}; then echo ${script} found! Executing ...;source ${scriptaddr};fi;
scriptaddr=0x90000000
serverip=172.16.1.7
soc=tegra30
stderr=serial
stdin=serial
stdout=serial
usb_boot=setenv devtype usb; run usb_init; if usb dev ${devnum}; then run scan_boot; fi
usb_init=if ${usb_need_init}; then set usb_need_init false; usb start 0; fi
usbethaddr=58:6d:8f:50:ba:18
vendor=nvidia
Environment size: 1603/8188 bytes
Tegra30 (Beaver) # printenv bootargs
printenv bootargs
bootargs=console=ttyS0,115200 earlyprintk debug root=/dev/mmcblk0p1 rootwait
Tegra30 (Beaver) # tftpboot 0x82000000 172.16.1.4:/srv/tftp/mainline/v3.12-rc4-29-g0e7a3ed/uImage.tegra30
tftpboot 0x82000000 172.16.1.4:/srv/tftp/mainline/v3.12-rc4-29-g0e7a3ed/uImage.tegra30
Using asx0 device
TFTP from server 172.16.1.4; our IP address is 172.16.1.114
Filename '/srv/tftp/mainline/v3.12-rc4-29-g0e7a3ed/uImage.tegra30'.
Load address: 0x82000000
Loading: *
TFTP error: 'File not found' (1)
Not retrying...
Tegra30 (Beaver) # node: beaver          status: on
~$off
========================================================================
Board panda failure log:
    -------------------------------------------------
hostname=panda-es
ipaddr=172.16.1.182
legacy=usb start ; bootp ; tftpboot 0x80000000 172.16.1.7:/srv/tftp/uImage.panda && bootm 0x80000000
loadaddr=0x80000000
local=mmc rescan 0 ; fatload mmc 0:1 0x80000000 uImage && bootm 0x80000000
netmask=255.255.255.0
serverip=172.16.1.7
usb_boot=usb start ; bootp ; tftpboot 0x80000000 172.16.1.7:/srv/tftp/uImage.panda && tftp 0x81000000 172.16.1.7:/srv/tftp/omap4-panda.dtb && bootm 0x80000000 - 0x81000000
usbethaddr=2E:60:67:E0:49:01
Environment size: 821/131068 bytes
Panda # printenv bootargs
printenv bootargs
bootargs=console=ttyO2,115200 root=/dev/mmcblk0p2 rootwait debug earlyprintk
Panda # tftpboot 0x80000000 172.16.1.4:/srv/tftp/mainline/v3.12-rc4-29-g0e7a3ed/uImage.omap
tftpboot 0x80000000 172.16.1.4:/srv/tftp/mainline/v3.12-rc4-29-g0e7a3ed/uImage.omap
Waiting for Ethernet connection... done.
Using sms0 device
TFTP from server 172.16.1.4; our IP address is 172.16.1.182
Filename '/srv/tftp/mainline/v3.12-rc4-29-g0e7a3ed/uImage.omap'.
Load address: 0x80000000
Loading: *#
done
Bytes transferred = 64 (40 hex)
Panda # tftpboot 0x81000000 172.16.1.4:/srv/tftp/mainline/v3.12-rc4-29-g0e7a3ed/omap4-panda-es.dtb
tftpboot 0x81000000 172.16.1.4:/srv/tftp/mainline/v3.12-rc4-29-g0e7a3ed/omap4-panda-es.dtb
Waiting for Ethernet connection... done.
Using sms0 device
TFTP from server 172.16.1.4; our IP address is 172.16.1.182
Filename '/srv/tftp/mainline/v3.12-rc4-29-g0e7a3ed/omap4-panda-es.dtb'.
Load address: 0x81000000
Loading: *####
done
Bytes transferred = 19128 (4ab8 hex)
Panda # bootm 0x80000000 - 0x81000000
bootm 0x80000000 - 0x81000000
Wrong Image Format for bootm command
ERROR: can't get kernel image!
Panda # node: panda-es        status: on
~$off
========================================================================
Board sama5 failure log:
    -------------------------------------------------
U-Boot> setenv autoboot no
setenv autoboot no
U-Boot> printenv
printenv
autoboot=no
autoload=no
baudrate=115200
bootargs=console=ttyS0,115200 root=/dev/mmcblk0p1 rootwait rw debug
bootcmd=nand read 0x21000000 0x00180000 0x0000509E; nand read 0x22000000 0x00200000 0x00281428; bootm 0x22000000 - 0x21000000
bootdelay=6
bootfile=mainline/v3.12-rc4-29-g0e7a3ed/uImage.sama5
eth1addr=08:00:08:e1:88:0e
ethact=gmacb0
ethprime=gmacb0
ipaddr=172.16.1.199
legacy_bootargs=console=ttyS0,115200 mtdparts=atmel_nand:8M(bootstrap/uboot/kernel)ro,-(rootfs) rw rootfstype=ubifs ubi.mtd=1 root=ubi0:rootfs
serverip=172.16.1.4
stderr=serial
stdin=serial
stdout=serial
Environment size: 613/131067 bytes
U-Boot> setenv bootargs 'console=ttyS0,115200 root=/dev/mmcblk0p1 rootwait rw'
setenv bootargs 'console=ttyS0,115200 root=/dev/mmcblk0p1 rootwait rw'
U-Boot> printenv bootargs
printenv bootargs
bootargs=console=ttyS0,115200 root=/dev/mmcblk0p1 rootwait rw
U-Boot> tftpboot 0x22000000 172.16.1.4:/srv/tftp/mainline/v3.12-rc4-29-g0e7a3ed/uImage.sama5
tftpboot 0x22000000 172.16.1.4:/srv/tftp/mainline/v3.12-rc4-29-g0e7a3ed/uImage.sama5
gmacb0: PHY present at 1
gmacb0: link up, 1000Mbps full-duplex (lpa: 0x0300)
Using gmacb0 device
TFTP from server 172.16.1.4; our IP address is 172.16.1.199
Filename '/srv/tftp/mainline/v3.12-rc4-29-g0e7a3ed/uImage.sama5'.
Load address: 0x22000000
Loading: *
TFTP error: 'File not found' (1)
Not retrying...
U-Boot> node: sama5           status: on
~$off
========================================================================
Board snowball failure log:
    -------------------------------------------------
addcons=setenv bootargs ${bootargs} console=${console}
emmcboot=echo Booting from eMMC ...; run commonargs emmcargs memargs; bootm ${loadaddr}
mmcargs=setenv bootargs ${bootargs} root=/dev/mmcblk1p2 rootwait
mmcboot=echo Booting from external MMC ...; run commonargs mmcargs memargs; bootm ${loadaddr}
ethact=smc911x-0
bootdelay=5
bootargs=console=ttyAMA2,115200 root=/dev/mmcblk0p4 rootwait rw debug earlyprintk
ethaddr=08:00:08:1e:0f:44
stdin=serial
stdout=serial
stderr=serial
board_id=1
startup_graphics=0
logo=0
crashkernel=crashkernel=1M@0x5600000
autoload=no
netmask=255.255.255.0
ipaddr=172.16.1.141
serverip=172.16.1.7
bootfile=mainline/v3.12-rc4-29-g0e7a3ed/uImage.snowball
autoboot=no
Environment size: 1704/4092 bytes
U8500 $ printenv bootargs
printenv bootargs
bootargs=console=ttyAMA2,115200 root=/dev/mmcblk0p4 rootwait rw debug earlyprintk
U8500 $ tftpboot 0x100000 172.16.1.4:/srv/tftp/mainline/v3.12-rc4-29-g0e7a3ed/uImage.snowball
tftpboot 0x100000 172.16.1.4:/srv/tftp/mainline/v3.12-rc4-29-g0e7a3ed/uImage.snowball
smc911x: detected LAN9221 controller
smc911x: phy initialized
smc911x: MAC 08:00:08:1e:0f:44
Using smc911x-0 device
TFTP from server 172.16.1.4; our IP address is 172.16.1.141
Filename '/srv/tftp/mainline/v3.12-rc4-29-g0e7a3ed/uImage.snowball'.
Load address: 0x100000
Loading: *
TFTP error: 'File not found' (1)
Not retrying...
U8500 $ node: snowball        status: on
~$off
========================================================================
Board wandboard failure log:
    -------------------------------------------------
gatewayip=172.16.1.1
importbootenv=echo Importing environment from mmc (uEnv.txt)...; env import -t $loadaddr $filesize
initrd_high=0xffffffff
ip_dyn=yes
ipaddr=172.16.1.174
loadaddr=0x12000000
loadbootenv=load mmc ${mmcdev}:${mmcpart} ${loadaddr} uEnv.txt
loadbootscript=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};
loadfdt=load mmc ${mmcdev}:${mmcpart} ${fdt_addr} /dtbs/${fdt_file}
loaduimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${uimage}
loadzimage=load mmc ${mmcdev}:${mmcpart} ${loadaddr} zImage
mmcargs=setenv bootargs console=${console},${baudrate} ${optargs} root=${mmcroot} rootfstype=${mmcrootfstype} video=${video}
mmcboot=echo Booting from mmc ...; run mmcargs; if test ${boot_fdt} = yes || test ${boot_fdt} = try; then if run loadfdt; then bootz ${loadaddr} - ${fdt_addr}; else if test ${boot_fdt} = try; then bootz ${loadaddr}; else echo WARN: Cannot load the DT; fi; fi; else bootz ${loadaddr}; fi;
mmcdev=0
mmcpart=1
mmcroot=/dev/mmcblk0p2 ro
mmcrootfstype=ext4 rootwait
netargs=setenv bootargs console=${console},${baudrate} root=/dev/nfs ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp
netboot=echo Booting from net ...; run netargs; if test ${ip_dyn} = yes; then setenv get_cmd dhcp; else setenv get_cmd tftp; fi; ${get_cmd} zImage; if test ${boot_fdt} = yes || test ${boot_fdt} = try; then if ${get_cmd} ${fdt_addr} ${fdt_file}; then bootz ${loadaddr} - ${fdt_addr}; else if test ${boot_fdt} = try; then bootz ${loadaddr}; else echo WARN: Cannot load the DT; fi; fi; else bootz ${loadaddr}; fi;
netmask=255.255.255.0
script=boot.scr
serverip=172.16.1.7
uimage=uImage
update_sd_firmware=if test ${ip_dyn} = yes; then setenv get_cmd dhcp; else setenv get_cmd tftp; fi; if mmc dev ${mmcdev}; then if ${get_cmd} ${update_sd_firmware_filename}; then setexpr fw_sz ${filesize} / 0x200; setexpr fw_sz ${fw_sz} + 1; mmc write ${loadaddr} 0x2 ${fw_sz}; fi; fi
update_sd_firmware_filename=u-boot.imx
Environment size: 2716/8188 bytes
=> printenv bootargs
printenv bootargs
bootargs=console=ttymxc0,115200 root=/dev/mmcblk0p2 rootwait debug
=> tftpboot 0x12000000 172.16.1.4:/srv/tftp/mainline/v3.12-rc4-29-g0e7a3ed/uImage.imx
tftpboot 0x12000000 172.16.1.4:/srv/tftp/mainline/v3.12-rc4-29-g0e7a3ed/uImage.imx
Using FEC device
TFTP from server 172.16.1.4; our IP address is 172.16.1.174
Filename '/srv/tftp/mainline/v3.12-rc4-29-g0e7a3ed/uImage.imx'.
Load address: 0x12000000
Loading: *
TFTP error: 'File not found' (1)
Not retrying...
=> ~$off