Failed boards:

panda multi_v7_defconfig : FAILED 3:10.30 snowball multi_v7_defconfig : FAILED 1:13.29

Successful boards:

apc vt8500_v6_v7_defconfig : passed 1:12.61 arndale exynos_defconfig : passed 1:06.30 bbb omap2plus_defconfig : passed 1:37.25 bbb multi_v7_defconfig : passed 1:26.37 beaver tegra_defconfig : passed 1:05.61 beaver multi_v7_defconfig : passed 0:53.00 capri bcm_defconfig : passed 0:47.95 capri multi_v7_defconfig : passed 0:45.09 cubie sunxi_defconfig : passed 1:08.33 cubie multi_v7_defconfig : passed 1:07.10 cubie2 sunxi_defconfig : passed 1:12.11 cubie2 multi_v7_defconfig : passed 1:14.30 cubie2 multi_lpae_defconfig : passed 1:19.76 dalmore tegra_defconfig : passed 1:25.18 dalmore multi_v7_defconfig : passed 1:19.67 dalmore multi_lpae_defconfig : passed 1:18.76 hummingboard imx_v6_v7_defconfig : passed 1:23.34 hummingboard multi_v7_defconfig : passed 1:14.05 omap5uevm omap2plus_defconfig : passed 1:17.33 omap5uevm multi_v7_defconfig : passed 1:49.11 omap5uevm multi_lpae_defconfig : passed 1:48.73 panda omap2plus_defconfig : warnings 1:16.55 sama5 sama5_defconfig : passed 2:03.23 seaboard tegra_defconfig : passed 1:08.46 seaboard multi_v7_defconfig : passed 1:15.03 snow exynos_defconfig : passed 1:36.71 snowball u8500_defconfig : passed 2:15.71 trimslice tegra_defconfig : passed 1:02.99 trimslice multi_v7_defconfig : passed 1:04.22 wandboard imx_v6_v7_defconfig : passed 0:56.10 wandboard multi_v7_defconfig : passed 0:59.93

Offline boards:

Board legend is available at http://arm-soc.lixom.net/boards.html

Last entries of failed logs below:

========================================================================

Board panda-multi_v7_defconfig failure log: -------------------------------------------------

[ 1.771728] VPP: 1800 <--> 2500 mV at 1900 mV [ 1.777191] VUSIM: 1200 <--> 2900 mV at 1800 mV [ 1.782196] VDAC: 1800 mV [ 1.782196] VANA: 2100 mV [ 1.789489] VCXIO: 1800 mV [ 1.789520] VUSB: 3300 mV [ 1.796417] V1V8: 1800 mV [ 1.799987] V2V1: 2100 mV [ 1.806060] omap_i2c 48070000.i2c: bus 0 rev0.11 at 400 kHz [ 1.879272] usb 1-1: new high-speed USB device number 2 using ehci-omap [ 2.080261] hub 1-1:1.0: USB hub found [ 2.084350] hub 1-1:1.0: 5 ports detected [ 2.130157] omap_i2c 48072000.i2c: bus 1 rev0.11 at 400 kHz [ 2.369354] usb 1-1.1: new high-speed USB device number 3 using ehci-omap [ 2.377044] gic_timer_retrigger: lost localtimer interrupt [ 2.439605] omap_i2c 48060000.i2c: bus 2 rev0.11 at 100 kHz [ 2.513458] smsc95xx v1.0.4 [ 2.583465] smsc95xx 1-1.1:1.0 eth0: register 'smsc95xx' at usb-4a064c00.ehci-1.1, smsc95xx USB 2.0 Ethernet, 3a:59:25:73:05:12 [ 2.759552] omap_i2c 48350000.i2c: bus 3 rev0.11 at 400 kHz [ 2.767608] omap_hsmmc 4809c000.mmc: pins are not configured from the driver [ 2.981903] twl_rtc rtc.15: setting system clock to 2000-01-01 00:00:01 UTC (946684801) [ 2.996032] ALSA device list: [ 2.999267] No soundcards found. [ 3.003204] Waiting for root device /dev/mmcblk0p2... [ 3.015472] mmc0: host does not support reading read-only switch. assuming write-enable. [ 3.025878] mmc0: new high speed SDHC card at address b368 [ 3.032012] mmcblk0: mmc0:b368 00000 7.51 GiB [ 3.038574] mmcblk0: p1 p2 [ 3.046691] omap_hsmmc 480d5000.mmc: card claims to support voltages below defined range [ 3.066650] mmc1: queuing unknown CIS tuple 0x91 (3 bytes) [ 3.073333] mmc1: new SDIO card at address 0001 [ 3.139495] EXT4-fs (mmcblk0p2): couldn't mount as ext3 due to feature incompatibilities [ 3.148956] EXT4-fs (mmcblk0p2): couldn't mount as ext2 due to feature incompatibilities [ 3.173339] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null) [ 3.181976] VFS: Mounted root (ext4 filesystem) readonly on device 179:2. [ 3.200256] devtmpfs: mounted [ 3.200256] Freeing unused kernel memory: 556K (c0a70000 - c0afb000) INIT: version 2.88 booting ~$off # PYBOOT: Exception: timeout

========================================================================

Board snowball-multi_v7_defconfig failure log: -------------------------------------------------

BOOTP broadcast 1 *** Unhandled DHCP Option in OFFER/ACK: 28 *** Unhandled DHCP Option in OFFER/ACK: 28 DHCP client bound to address 172.16.1.147 U8500 $ setenv serverip 172.16.1.3 setenv serverip 172.16.1.3 U8500 $ tftp 0x01000000 tmp/snowball-u6ZKRb/tmpv0MdK8-uImage tftp 0x01000000 tmp/snowball-u6ZKRb/tmpv0MdK8-uImage smc911x: detected LAN9221 controller smc911x: phy initialized smc911x: MAC 08:00:08:1e:0f:44 Using smc911x-0 device TFTP from server 172.16.1.3; our IP address is 172.16.1.147 Filename 'tmp/snowball-u6ZKRb/tmpv0MdK8-uImage'. Load address: 0x1000000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ############################################################ done Bytes transferred = 4693745 (479ef1 hex) U8500 $ printenv bootargs printenv bootargs bootargs=console=ttyAMA2,115200 root=/dev/mmcblk0p4 rootwait rw debug earlyprintk U8500 $bootm 0x01000000 bootm 0x01000000 ## Booting kernel from Legacy Image at 01000000 ... Image Name: Linux Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 4693681 Bytes = 4.5 MB Load Address: 00008000 Entry Point: 00008000 Loading Kernel Image ... OK OK

Starting kernel ...

~$off # PYBOOT: Exception: timeout