Full logs are available at http://arm-soc.lixom.net/bootlogs/mainline/v4.6-rc7-45-g2d0bd95/

Failed boards:

arndale multi_v7_nosmp_defconfig : NO BUILD bbb arm-omap2plus_defconfig : FAILED 1:53.96 bbb arm-multi_v7_defconfig : FAILED 2:00.08 bbb multi_v7_nosmp_defconfig : NO BUILD beagleboard-x15 arm-omap2plus_defconfig : FAILED 1:44.38 beagleboard-x15 arm-multi_v7_defconfig : FAILED 1:44.69 beagleboard-x15 arm-multi_lpae_defconfig : FAILED 2:00.68 beagleboard-x15 multi_v7_nosmp_defconfig : NO BUILD beaver multi_v7_nosmp_defconfig : NO BUILD capri multi_v7_nosmp_defconfig : NO BUILD chitra powerpc-pasemi_defconfig : BUILD FAILED colibri-vf61 multi_v7_nosmp_defconfig : NO BUILD colombus multi_v7_nosmp_defconfig : NO BUILD cosmic arm-imx_v6_v7_defconfig : FAILED 2:02.52 cosmic arm-multi_v7_defconfig : FAILED 2:11.11 cosmic multi_v7_nosmp_defconfig : NO BUILD cubie multi_v7_nosmp_defconfig : NO BUILD cubie2 multi_v7_nosmp_defconfig : NO BUILD cubox multi_v7_nosmp_defconfig : NO BUILD dalmore arm-tegra_defconfig : FAILED 1:48.53 dalmore arm-multi_v7_defconfig : FAILED 1:57.59 dalmore arm-multi_lpae_defconfig : FAILED 1:56.90 dalmore multi_v7_nosmp_defconfig : NO BUILD hummingboard multi_v7_nosmp_defconfig : NO BUILD jetsontk1 multi_v7_nosmp_defconfig : NO BUILD minnowmax minnowmax_defconfig : NO BUILD odroidu3 arm-exynos_defconfig : FAILED 1:58.56 omap5uevm arm-multi_v7_defconfig : FAILED 2:09.36 omap5uevm arm-multi_lpae_defconfig : FAILED 1:05.55 omap5uevm multi_v7_nosmp_defconfig : NO BUILD pandaes multi_v7_nosmp_defconfig : NO BUILD parallella multi_v7_nosmp_defconfig : NO BUILD pi multi_v7_nosmp_defconfig : NO BUILD pit multi_v7_nosmp_defconfig : NO BUILD rk3288evb multi_v7_nosmp_defconfig : NO BUILD seaboard arm-tegra_defconfig : FAILED 1:49.51 seaboard arm-multi_v7_defconfig : FAILED 2:00.27 seaboard multi_v7_nosmp_defconfig : NO BUILD snow multi_v7_nosmp_defconfig : NO BUILD snowball arm-u8500_defconfig : FAILED 1:55.92 snowball arm-multi_v7_defconfig : FAILED 2:15.70 snowball multi_v7_nosmp_defconfig : NO BUILD socfpga multi_v7_nosmp_defconfig : NO BUILD trimslice multi_v7_nosmp_defconfig : NO BUILD wandboard multi_v7_nosmp_defconfig : NO BUILD

Successful boards:

apc arm-vt8500_v6_v7_defconfig : passed 1:13.20 arndale arm-exynos_defconfig : passed 1:35.48 arndale arm-multi_v7_defconfig : passed 1:24.36 arndale arm-multi_lpae_defconfig : passed 1:28.44 capri arm-bcm_defconfig : passed 0:48.75 capri arm-multi_v7_defconfig : passed 0:54.84 chitra powerpc-ppc64_defconfig : passed 2:07.58 colombus arm-sunxi_defconfig : passed 2:24.17 colombus arm-multi_v7_defconfig : passed 2:34.56 colombus arm-multi_lpae_defconfig : passed 2:24.78 cubie arm-sunxi_defconfig : passed 0:49.67 cubie arm-multi_v7_defconfig : passed 0:52.59 cubie2 arm-sunxi_defconfig : passed 0:53.32 cubie2 arm-multi_v7_defconfig : passed 0:51.17 cubie2 arm-multi_lpae_defconfig : passed 1:01.20 cubox arm-multi_v7_defconfig : passed 1:08.17 cubox arm-mvebu_v7_defconfig : passed 1:13.17 hummingboard arm-imx_v6_v7_defconfig : passed 1:43.59 hummingboard arm-multi_v7_defconfig : passed 1:19.97 jetsontk1 arm-tegra_defconfig : passed 1:34.63 jetsontk1 arm-multi_v7_defconfig : passed 1:36.20 jetsontk1 arm-multi_lpae_defconfig : passed 1:36.05 omap5uevm arm-omap2plus_defconfig : passed 1:08.74 pandaes arm-omap2plus_defconfig : warnings 1:35.67 pandaes arm-multi_v7_defconfig : passed 1:47.84 pi arm-exynos_defconfig : passed 2:08.01 pi arm-multi_v7_defconfig : passed 2:13.37 pi arm-multi_lpae_defconfig : passed 2:20.81 pit arm-exynos_defconfig : passed 2:10.43 pit arm-multi_v7_defconfig : passed 2:12.81 pit arm-multi_lpae_defconfig : passed 2:12.34 seattle arm64-defconfig : warnings 2:28.25 snow arm-exynos_defconfig : passed 2:10.66 snow arm-multi_v7_defconfig : passed 2:00.32 snow arm-multi_lpae_defconfig : passed 1:58.60 trimslice arm-multi_v7_defconfig : passed 2:44.39 wandboard arm-imx_v6_v7_defconfig : passed 1:18.04 wandboard arm-multi_v7_defconfig : passed 1:10.71

Offline boards:

beaver arm-tegra_defconfig : OFFLINE 2:12.75 beaver arm-multi_v7_defconfig : OFFLINE 2:33.80 colibri-vf61 arm-imx_v6_v7_defconfig : OFFLINE 2:12.67 colibri-vf61 arm-multi_v7_defconfig : OFFLINE 2:31.67 parallella arm-multi_v7_defconfig : OFFLINE 2:32.89 rk3288evb arm-multi_v7_defconfig : OFFLINE 0:53.99 rk3288evb arm-multi_lpae_defconfig : OFFLINE 0:42.81 sama5 arm-sama5_defconfig : OFFLINE 2:17.98 sama5d3-xplained arm-sama5_defconfig : OFFLINE 2:19.46 socfpga arm-socfpga_defconfig : OFFLINE 2:19.05 socfpga arm-multi_v7_defconfig : OFFLINE 2:20.71 trimslice arm-tegra_defconfig : OFFLINE 2:16.77

Board legend is available at http://arm-soc.lixom.net/boards.html

Board bbb-arm-multi_v7_defconfig failure log: -------------------------------------------------

[ 1.625699] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.635939] ledtrig-cpu: registered to indicate activity on CPUs [ 1.643022] usbcore: registered new interface driver usbhid [ 1.648948] usbhid: USB HID core driver [ 1.660885] NET: Registered protocol family 10 [ 1.667469] sit: IPv6 over IPv4 tunneling driver [ 1.673606] NET: Registered protocol family 17 [ 1.678383] can: controller area network core (rev 20120528 abi 9) [ 1.685024] NET: Registered protocol family 29 [ 1.689748] can: raw protocol (rev 20120528) [ 1.694271] can: broadcast manager protocol (rev 20120528 t) [ 1.700268] can: netlink gateway (rev 20130117) max_hops=1 [ 1.707039] Key type dns_resolver registered [ 1.711943] omap_voltage_late_init: Voltage driver support not added [ 1.720224] ThumbEE CPU extension supported. [ 1.724853] Registering SWP/SWPB emulation handler [ 1.767208] tps65217 0-0024: TPS65217 ID 0xe version 1.2 [ 1.773741] at24 0-0050: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.781500] omap_i2c 44e0b000.i2c: bus 0 rev0.11 at 400 kHz [ 1.790178] at24 2-0054: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.798083] at24 2-0055: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.805912] at24 2-0056: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.813729] at24 2-0057: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.821080] omap_i2c 4819c000.i2c: bus 2 rev0.11 at 100 kHz [ 1.829769] cpufreq: cpufreq_online: CPU0: Running at unlisted freq: 550000 KHz [ 1.837684] cpufreq: cpufreq_online: CPU0: Unlisted initial frequency changed to: 600000 KHz [ 1.847418] mmc1: new high speed MMC card at address 0001 [ 1.854675] hctosys: unable to open rtc device (rtc0) [ 1.867705] mmcblk1: mmc1:0001 MMC02G 1.79 GiB [ 1.873717] mmcblk1boot0: mmc1:0001 MMC02G partition 1 1.00 MiB [ 1.880706] mmcblk1boot1: mmc1:0001 MMC02G partition 2 1.00 MiB [ 1.889550] mmcblk1: p1 p2 [ 1.895252] Waiting for root device /dev/mmcblk0p2...

[PYBOOT] [bbb 01:57]: Timed out waiting for "<type 'str'>":

[PYBOOT] [bbb 01:58]: got exception: timeout ~$off

[PYBOOT] [bbb 01:59]: Done. Board bbb-arm-omap2plus_defconfig failure log: -------------------------------------------------

[ 2.044452] omap_hsmmc 481d8000.mmc: lookup for GPIO cd failed [ 2.050568] omap_hsmmc 481d8000.mmc: GPIO lookup for consumer wp [ 2.056898] omap_hsmmc 481d8000.mmc: using device tree for GPIO lookup [ 2.063772] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@481d8000[0]' [ 2.073364] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@481d8000[0]' [ 2.082861] omap_hsmmc 481d8000.mmc: using lookup tables for GPIO lookup [ 2.089877] omap_hsmmc 481d8000.mmc: lookup for GPIO wp failed [ 2.133271] ledtrig-cpu: registered to indicate activity on CPUs [ 2.141967] oprofile: using arm/armv7 [ 2.147059] Initializing XFRM netlink socket [ 2.152137] NET: Registered protocol family 10 [ 2.162858] sit: IPv6 over IPv4 tunneling driver [ 2.171623] NET: Registered protocol family 17 [ 2.176553] NET: Registered protocol family 15 [ 2.181781] Key type dns_resolver registered [ 2.186716] omap_voltage_late_init: Voltage driver support not added [ 2.193456] sr_dev_init: No voltage domain specified for smartreflex0. Cannot initialize [ 2.201922] sr_dev_init: No voltage domain specified for smartreflex1. Cannot initialize [ 2.212163] ThumbEE CPU extension supported. [ 2.216814] Registering SWP/SWPB emulation handler [ 2.221844] SmartReflex Class3 initialized [ 2.291132] tps65217 0-0024: TPS65217 ID 0xe version 1.2 [ 2.298417] omap_i2c 44e0b000.i2c: bus 0 rev0.11 at 400 kHz [ 2.308948] mmc1: new high speed MMC card at address 0001 [ 2.321069] omap_i2c 4819c000.i2c: bus 2 rev0.11 at 100 kHz [ 2.329337] mmcblk1: mmc1:0001 MMC02G 1.79 GiB [ 2.337143] hctosys: unable to open rtc device (rtc0) [ 2.342465] sr_init: No PMIC hook to init smartreflex [ 2.348253] sr_init: platform driver register failed for SR [ 2.388046] mmcblk1boot0: mmc1:0001 MMC02G partition 1 1.00 MiB [ 2.396025] mmcblk1boot1: mmc1:0001 MMC02G partition 2 1.00 MiB [ 2.410312] mmcblk1: p1 p2 [ 2.427880] Waiting for root device /dev/mmcblk0p2...

[PYBOOT] [bbb 01:51]: Timed out waiting for "<type 'str'>":

[PYBOOT] [bbb 01:52]: got exception: timeout ~$off

[PYBOOT] [bbb 01:53]: Done. Board beagleboard-x15-arm-multi_lpae_defconfig failure log: -------------------------------------------------

[ 1.717247] at24 0-0050: 4096 byte 24c32 EEPROM, writable, 1 bytes/write [ 1.724326] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 1.750636] rtc-ds1307 2-006f: SET TIME! [ 1.756369] rtc-ds1307 2-006f: rtc core: registered mcp7941x as rtc0 [ 1.763119] rtc-ds1307 2-006f: 64 bytes nvram [ 1.767735] omap_i2c 48060000.i2c: bus 2 rev0.12 at 400 kHz [ 1.775917] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller [ 1.781699] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1 [ 1.789947] xhci-hcd xhci-hcd.0.auto: hcc params 0x0220f04c hci version 0x100 quirks 0x00010010 [ 1.799109] xhci-hcd xhci-hcd.0.auto: irq 400, io mem 0x48890000 [ 1.805986] hub 1-0:1.0: USB hub found [ 1.809934] hub 1-0:1.0: 1 port detected [ 1.814334] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller [ 1.820111] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2 [ 1.828220] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. [ 1.837232] hub 2-0:1.0: USB hub found [ 1.841201] hub 2-0:1.0: 1 port detected [ 1.847232] omap_hsmmc 4809c000.mmc: Got CD GPIO [ 1.881281] vdd_3v3: supplied by regen1 [ 1.919340] rtc-ds1307 2-006f: setting system clock to 2001-01-01 00:00:00 UTC (978307200) [ 1.937287] aic_dvdd_fixed: disabling [ 1.942027] Waiting for root device /dev/mmcblk0p1... [ 1.969199] mmc1: new high speed MMC card at address 0001 [ 1.975184] mmcblk1: mmc1:0001 S10004 3.56 GiB [ 1.980051] mmcblk1boot0: mmc1:0001 S10004 partition 1 4.00 MiB [ 1.986385] mmcblk1boot1: mmc1:0001 S10004 partition 2 4.00 MiB [ 1.993245] mmcblk1: p1 [ 2.120139] usb 1-1: new high-speed USB device number 2 using xhci-hcd [ 2.155164] usb 2-1: new SuperSpeed USB device number 2 using xhci-hcd [ 2.180332] hub 2-1:1.0: USB hub found [ 2.184311] hub 2-1:1.0: 4 ports detected [ 2.276352] hub 1-1:1.0: USB hub found [ 2.280339] hub 1-1:1.0: 4 ports detected

[PYBOOT] [beagleboard-x15 01:57]: Timed out waiting for "<type 'str'>":

[PYBOOT] [beagleboard-x15 01:58]: got exception: timeout ~$off

[PYBOOT] [beagleboard-x15 01:59]: Done. Board beagleboard-x15-arm-multi_v7_defconfig failure log: -------------------------------------------------

[ 1.722399] at24 0-0050: 4096 byte 24c32 EEPROM, writable, 1 bytes/write [ 1.729479] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 1.755685] rtc-ds1307 2-006f: SET TIME! [ 1.761422] rtc-ds1307 2-006f: rtc core: registered mcp7941x as rtc0 [ 1.768179] rtc-ds1307 2-006f: 64 bytes nvram [ 1.772785] omap_i2c 48060000.i2c: bus 2 rev0.12 at 400 kHz [ 1.780973] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller [ 1.786761] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1 [ 1.795001] xhci-hcd xhci-hcd.0.auto: hcc params 0x0220f04c hci version 0x100 quirks 0x00010010 [ 1.804160] xhci-hcd xhci-hcd.0.auto: irq 400, io mem 0x48890000 [ 1.811025] hub 1-0:1.0: USB hub found [ 1.814983] hub 1-0:1.0: 1 port detected [ 1.819380] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller [ 1.825156] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2 [ 1.833267] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. [ 1.842268] hub 2-0:1.0: USB hub found [ 1.846239] hub 2-0:1.0: 1 port detected [ 1.852243] omap_hsmmc 4809c000.mmc: Got CD GPIO [ 1.886299] vdd_3v3: supplied by regen1 [ 1.925383] rtc-ds1307 2-006f: setting system clock to 2001-01-01 00:00:00 UTC (978307200) [ 1.943327] aic_dvdd_fixed: disabling [ 1.948065] Waiting for root device /dev/mmcblk0p1... [ 1.977252] mmc1: new high speed MMC card at address 0001 [ 1.983223] mmcblk1: mmc1:0001 S10004 3.56 GiB [ 1.988110] mmcblk1boot0: mmc1:0001 S10004 partition 1 4.00 MiB [ 1.994441] mmcblk1boot1: mmc1:0001 S10004 partition 2 4.00 MiB [ 2.001303] mmcblk1: p1 [ 2.125186] usb 1-1: new high-speed USB device number 2 using xhci-hcd [ 2.160212] usb 2-1: new SuperSpeed USB device number 2 using xhci-hcd [ 2.185382] hub 2-1:1.0: USB hub found [ 2.189359] hub 2-1:1.0: 4 ports detected [ 2.281401] hub 1-1:1.0: USB hub found [ 2.285385] hub 1-1:1.0: 4 ports detected

[PYBOOT] [beagleboard-x15 01:41]: Timed out waiting for "<type 'str'>":

[PYBOOT] [beagleboard-x15 01:42]: got exception: timeout ~$off

[PYBOOT] [beagleboard-x15 01:43]: Done. Board beagleboard-x15-arm-omap2plus_defconfig failure log: -------------------------------------------------

[ 2.183701] omap_hsmmc 4809c000.mmc: using device tree for GPIO lookup [ 2.190572] of_get_named_gpiod_flags: parsed 'cd-gpios' property of node '/ocp/mmc@4809c000[0]' - status (0) [ 2.200959] omap_hsmmc 4809c000.mmc: Got CD GPIO [ 2.205823] omap_hsmmc 4809c000.mmc: GPIO lookup for consumer wp [ 2.212120] omap_hsmmc 4809c000.mmc: using device tree for GPIO lookup [ 2.218982] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@4809c000[0]' [ 2.228576] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@4809c000[0]' [ 2.238063] omap_hsmmc 4809c000.mmc: using lookup tables for GPIO lookup [ 2.245127] omap_hsmmc 4809c000.mmc: lookup for GPIO wp failed [ 2.293929] omap_hsmmc 480b4000.mmc: GPIO lookup for consumer cd [ 2.300230] omap_hsmmc 480b4000.mmc: using device tree for GPIO lookup [ 2.307103] of_get_named_gpiod_flags: can't parse 'cd-gpios' property of node '/ocp/mmc@480b4000[0]' [ 2.316699] of_get_named_gpiod_flags: can't parse 'cd-gpio' property of node '/ocp/mmc@480b4000[0]' [ 2.326194] omap_hsmmc 480b4000.mmc: using lookup tables for GPIO lookup [ 2.333237] omap_hsmmc 480b4000.mmc: lookup for GPIO cd failed [ 2.339352] omap_hsmmc 480b4000.mmc: GPIO lookup for consumer wp [ 2.345665] omap_hsmmc 480b4000.mmc: using device tree for GPIO lookup [ 2.352513] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@480b4000[0]' [ 2.362104] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@480b4000[0]' [ 2.371603] omap_hsmmc 480b4000.mmc: using lookup tables for GPIO lookup [ 2.378644] omap_hsmmc 480b4000.mmc: lookup for GPIO wp failed [ 2.385346] vdd_3v3: supplied by regen1 [ 2.424081] hctosys: unable to open rtc device (rtc0) [ 2.429381] sr_init: No PMIC hook to init smartreflex [ 2.434889] sr_init: platform driver register failed for SR [ 2.475681] mmc1: new high speed MMC card at address 0001 [ 2.483119] aic_dvdd_fixed: disabling [ 2.483578] mmcblk1: mmc1:0001 S10004 3.56 GiB [ 2.484269] mmcblk1boot0: mmc1:0001 S10004 partition 1 4.00 MiB [ 2.484910] mmcblk1boot1: mmc1:0001 S10004 partition 2 4.00 MiB [ 2.494536] mmcblk1: p1 [ 2.507185] ldousb: disabling [ 2.513252] Waiting for root device /dev/mmcblk0p1...

[PYBOOT] [beagleboard-x15 01:41]: Timed out waiting for "<type 'str'>":

[PYBOOT] [beagleboard-x15 01:42]: got exception: timeout ~$off

[PYBOOT] [beagleboard-x15 01:43]: Done. Board cosmic-arm-imx_v6_v7_defconfig failure log: -------------------------------------------------

[ 14.484749] blk_update_request: I/O error, dev mmcblk0, sector 3633185 [ 18.558983] mmcblk0: error -110 transferring data, sector 3633186, nr 230, cmd response 0x900, card status 0x0 [ 18.569302] blk_update_request: I/O error, dev mmcblk0, sector 3633186 [ 22.643483] mmcblk0: error -110 transferring data, sector 3633187, nr 229, cmd response 0x900, card status 0x0 [ 22.653800] blk_update_request: I/O error, dev mmcblk0, sector 3633187 [ 26.728034] mmcblk0: error -110 transferring data, sector 3633188, nr 228, cmd response 0x900, card status 0x0 [ 26.738358] blk_update_request: I/O error, dev mmcblk0, sector 3633188 [ 30.812550] mmcblk0: error -110 transferring data, sector 3633189, nr 227, cmd response 0x900, card status 0x0 [ 30.822880] blk_update_request: I/O error, dev mmcblk0, sector 3633189 [ 34.897127] mmcblk0: error -110 transferring data, sector 3633190, nr 226, cmd response 0x900, card status 0x0 [ 34.907450] blk_update_request: I/O error, dev mmcblk0, sector 3633190 [ 38.981638] mmcblk0: error -110 transferring data, sector 3633191, nr 225, cmd response 0x900, card status 0x0 [ 38.991958] blk_update_request: I/O error, dev mmcblk0, sector 3633191 [ 43.066214] mmcblk0: error -110 transferring data, sector 3633192, nr 224, cmd response 0x900, card status 0x0 [ 43.076535] blk_update_request: I/O error, dev mmcblk0, sector 3633192 [ 47.150769] mmcblk0: error -110 transferring data, sector 3633193, nr 223, cmd response 0x900, card status 0x0 [ 47.161084] blk_update_request: I/O error, dev mmcblk0, sector 3633193 [ 51.235321] mmcblk0: error -110 transferring data, sector 3633194, nr 222, cmd response 0x900, card status 0x0 [ 51.245636] blk_update_request: I/O error, dev mmcblk0, sector 3633194 [ 55.319870] mmcblk0: error -110 transferring data, sector 3633195, nr 221, cmd response 0x900, card status 0x0 [ 55.330191] blk_update_request: I/O error, dev mmcblk0, sector 3633195 [ 59.404424] mmcblk0: error -110 transferring data, sector 3633196, nr 220, cmd response 0x900, card status 0x0 [ 59.414780] blk_update_request: I/O error, dev mmcblk0, sector 3633196 [ 63.489133] mmcblk0: error -110 transferring data, sector 3633197, nr 219, cmd response 0x900, card status 0x0 [ 63.499457] blk_update_request: I/O error, dev mmcblk0, sector 3633197 [ 67.573638] mmcblk0: error -110 transferring data, sector 3633198, nr 218, cmd response 0x900, card status 0x0 [ 67.583958] blk_update_request: I/O error, dev mmcblk0, sector 3633198 [ 71.658183] mmcblk0: error -110 transferring data, sector 3633199, nr 217, cmd response 0x900, card status 0x0 [ 71.668502] blk_update_request: I/O error, dev mmcblk0, sector 3633199 [ 75.742691] mmcblk0: error -110 transferring data, sector 3633200, nr 216, cmd response 0x900, card status 0x0 [ 75.753014] blk_update_request: I/O error, dev mmcblk0, sector 3633200 [ 79.827243] mmcblk0: error -110 transferring data, sector 3633201, nr 215, cmd response 0x900, card status 0x0 [ 79.837566] blk_update_request: I/O error, dev mmcblk0, sector 3633201

[PYBOOT] [cosmic 01:59]: Timed out waiting for "<type 'str'>":

[PYBOOT] [cosmic 02:00]: got exception: timeout ~$off

[PYBOOT] [cosmic 02:01]: Done. Board cosmic-arm-multi_v7_defconfig failure log: -------------------------------------------------

[ 14.082861] blk_update_request: I/O error, dev mmcblk0, sector 3633185 [ 18.156843] mmcblk0: error -110 transferring data, sector 3633186, nr 230, cmd response 0x900, card status 0x0 [ 18.166920] blk_update_request: I/O error, dev mmcblk0, sector 3633186 [ 22.240902] mmcblk0: error -110 transferring data, sector 3633187, nr 229, cmd response 0x900, card status 0x0 [ 22.250982] blk_update_request: I/O error, dev mmcblk0, sector 3633187 [ 26.324961] mmcblk0: error -110 transferring data, sector 3633188, nr 228, cmd response 0x900, card status 0x0 [ 26.335080] blk_update_request: I/O error, dev mmcblk0, sector 3633188 [ 30.409069] mmcblk0: error -110 transferring data, sector 3633189, nr 227, cmd response 0x900, card status 0x0 [ 30.419145] blk_update_request: I/O error, dev mmcblk0, sector 3633189 [ 34.493136] mmcblk0: error -110 transferring data, sector 3633190, nr 226, cmd response 0x900, card status 0x0 [ 34.503213] blk_update_request: I/O error, dev mmcblk0, sector 3633190 [ 38.577199] mmcblk0: error -110 transferring data, sector 3633191, nr 225, cmd response 0x900, card status 0x0 [ 38.587267] blk_update_request: I/O error, dev mmcblk0, sector 3633191 [ 42.661255] mmcblk0: error -110 transferring data, sector 3633192, nr 224, cmd response 0x900, card status 0x0 [ 42.671319] blk_update_request: I/O error, dev mmcblk0, sector 3633192 [ 46.745298] mmcblk0: error -110 transferring data, sector 3633193, nr 223, cmd response 0x900, card status 0x0 [ 46.755371] blk_update_request: I/O error, dev mmcblk0, sector 3633193 [ 50.829356] mmcblk0: error -110 transferring data, sector 3633194, nr 222, cmd response 0x900, card status 0x0 [ 50.839430] blk_update_request: I/O error, dev mmcblk0, sector 3633194 [ 54.913414] mmcblk0: error -110 transferring data, sector 3633195, nr 221, cmd response 0x900, card status 0x0 [ 54.923481] blk_update_request: I/O error, dev mmcblk0, sector 3633195 [ 58.997464] mmcblk0: error -110 transferring data, sector 3633196, nr 220, cmd response 0x900, card status 0x0 [ 59.007533] blk_update_request: I/O error, dev mmcblk0, sector 3633196 [ 63.081519] mmcblk0: error -110 transferring data, sector 3633197, nr 219, cmd response 0x900, card status 0x0 [ 63.091593] blk_update_request: I/O error, dev mmcblk0, sector 3633197 [ 67.165573] mmcblk0: error -110 transferring data, sector 3633198, nr 218, cmd response 0x900, card status 0x0 [ 67.175645] blk_update_request: I/O error, dev mmcblk0, sector 3633198 [ 71.249623] mmcblk0: error -110 transferring data, sector 3633199, nr 217, cmd response 0x900, card status 0x0 [ 71.259696] blk_update_request: I/O error, dev mmcblk0, sector 3633199 [ 75.333682] mmcblk0: error -110 transferring data, sector 3633200, nr 216, cmd response 0x900, card status 0x0 [ 75.343757] blk_update_request: I/O error, dev mmcblk0, sector 3633200 [ 79.417743] mmcblk0: error -110 transferring data, sector 3633201, nr 215, cmd response 0x900, card status 0x0 [ 79.427824] blk_update_request: I/O error, dev mmcblk0, sector 3633201

[PYBOOT] [cosmic 02:08]: Timed out waiting for "<type 'str'>":

[PYBOOT] [cosmic 02:09]: got exception: timeout ~$off

[PYBOOT] [cosmic 02:10]: Done. Board dalmore-arm-multi_lpae_defconfig failure log: -------------------------------------------------

[ 2.481127] Key type dns_resolver registered [ 2.487533] ThumbEE CPU extension supported. [ 2.491963] Registering SWP/SWPB emulation handler [ 2.524840] vdd-sys-5v0: supplied by vdd_ac_bat [ 2.531925] VDD_5V0_HDMI_CON: supplied by vdd-sys-5v0 [ 2.541242] vdd_hdmi_5v0: supplied by vdd-sys-5v0 [ 2.556433] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 2.563206] [drm] No driver support for vblank timestamp query. [ 2.580535] mmc1: new high speed MMC card at address 0001 [ 2.590267] mmcblk1: mmc1:0001 SEM32G 29.1 GiB [ 2.597483] mmcblk1boot0: mmc1:0001 SEM32G partition 1 4.00 MiB [ 2.607141] mmcblk1boot1: mmc1:0001 SEM32G partition 2 4.00 MiB [ 2.617080] mmcblk1rpmb: mmc1:0001 SEM32G partition 3 4.00 MiB [ 2.627801] mmcblk1: p1 [ 2.743096] Console: switching to colour frame buffer device 240x75 [ 2.830611] drm drm: fb0: frame buffer device [ 2.848898] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 2.859008] usb2_vbus: supplied by vdd-sys-5v0 [ 2.870720] tegra-ehci 7d008000.usb: EHCI Host Controller [ 2.876315] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 1 [ 2.885095] tegra-ehci 7d008000.usb: irq 339, io mem 0x7d008000 [ 2.898911] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.10 [ 2.909164] hub 1-0:1.0: USB hub found [ 2.913165] hub 1-0:1.0: 1 port detected [ 2.923761] input: gpio-keys as /devices/soc0/gpio-keys/input/input0 [ 2.938054] palmas-rtc 7000d000.i2c:tps65913@58:rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800) [ 2.999974] dvdd_ts: disabling [ 3.003075] usb1_vbus: disabling [ 3.006446] vdd_cam_1v8_reg: disabling [ 3.013928] Waiting for root device /dev/mmcblk0p1... [ 3.228934] usb 1-1: new high-speed USB device number 2 using tegra-ehci [ 4.207146] asix 1-1:1.0 eth0: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 48:f8:b3:2b:29:1f [ 65.023504] random: nonblocking pool is initialized

[PYBOOT] [dalmore 01:54]: Timed out waiting for "<type 'str'>":

[PYBOOT] [dalmore 01:55]: got exception: timeout ~$off

[PYBOOT] [dalmore 01:56]: Done. Board dalmore-arm-multi_v7_defconfig failure log: -------------------------------------------------

[ 2.480290] Key type dns_resolver registered [ 2.486705] ThumbEE CPU extension supported. [ 2.491124] Registering SWP/SWPB emulation handler [ 2.537297] vdd-sys-5v0: supplied by vdd_ac_bat [ 2.542721] VDD_5V0_HDMI_CON: supplied by vdd-sys-5v0 [ 2.551466] vdd_hdmi_5v0: supplied by vdd-sys-5v0 [ 2.567862] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 2.574764] [drm] No driver support for vblank timestamp query. [ 2.588166] mmc1: new high speed MMC card at address 0001 [ 2.597922] mmcblk1: mmc1:0001 SEM32G 29.1 GiB [ 2.604634] mmcblk1boot0: mmc1:0001 SEM32G partition 1 4.00 MiB [ 2.611728] mmcblk1boot1: mmc1:0001 SEM32G partition 2 4.00 MiB [ 2.619813] mmcblk1rpmb: mmc1:0001 SEM32G partition 3 4.00 MiB [ 2.629419] mmcblk1: p1 [ 2.754269] Console: switching to colour frame buffer device 240x75 [ 2.841256] drm drm: fb0: frame buffer device [ 2.859893] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 2.870039] usb2_vbus: supplied by vdd-sys-5v0 [ 2.880797] tegra-ehci 7d008000.usb: EHCI Host Controller [ 2.886388] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 1 [ 2.895313] tegra-ehci 7d008000.usb: irq 339, io mem 0x7d008000 [ 2.909912] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.10 [ 2.920255] hub 1-0:1.0: USB hub found [ 2.924334] hub 1-0:1.0: 1 port detected [ 2.934374] input: gpio-keys as /devices/soc0/gpio-keys/input/input0 [ 2.948290] palmas-rtc 7000d000.i2c:tps65913@58:rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800) [ 3.009685] dvdd_ts: disabling [ 3.012786] usb1_vbus: disabling [ 3.016144] vdd_cam_1v8_reg: disabling [ 3.023630] Waiting for root device /dev/mmcblk0p1... [ 3.234955] usb 1-1: new high-speed USB device number 2 using tegra-ehci [ 4.189879] asix 1-1:1.0 eth0: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 48:f8:b3:2b:29:1f [ 60.905157] random: nonblocking pool is initialized

[PYBOOT] [dalmore 01:54]: Timed out waiting for "<type 'str'>":

[PYBOOT] [dalmore 01:55]: got exception: timeout ~$off

[PYBOOT] [dalmore 01:56]: Done. Board dalmore-arm-tegra_defconfig failure log: -------------------------------------------------

[ 2.662518] Bluetooth: RFCOMM socket layer initialized [ 2.667743] Bluetooth: RFCOMM ver 1.11 [ 2.671694] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 2.677087] Bluetooth: BNEP socket layer initialized [ 2.682181] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 2.688177] Bluetooth: HIDP socket layer initialized [ 2.695189] Key type dns_resolver registered [ 2.704869] Registering SWP/SWPB emulation handler [ 2.734777] vdd-sys-5v0: supplied by vdd_ac_bat [ 2.739902] VDD_5V0_HDMI_CON: supplied by vdd-sys-5v0 [ 2.749509] vdd_hdmi_5v0: supplied by vdd-sys-5v0 [ 2.773475] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 2.780268] [drm] No driver support for vblank timestamp query. [ 2.958152] Console: switching to colour frame buffer device 240x75 [ 3.045067] drm drm: fb0: frame buffer device [ 3.070304] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 3.077582] usb2_vbus: supplied by vdd-sys-5v0 [ 3.086012] tegra-ehci 7d008000.usb: EHCI Host Controller [ 3.091823] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 1 [ 3.101000] tegra-ehci 7d008000.usb: irq 339, io mem 0x7d008000 [ 3.120311] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.10 [ 3.134386] hub 1-0:1.0: USB hub found [ 3.138346] hub 1-0:1.0: 1 port detected [ 3.151902] input: gpio-keys as /devices/soc0/gpio-keys/input/input1 [ 3.166081] palmas-rtc 7000d000.i2c:tps65913@58:rtc: setting system clock to 2000-01-01 00:00:01 UTC (946684801) [ 3.250364] dvdd_ts: disabling [ 3.253467] usb1_vbus: disabling [ 3.256730] vdd_cam_1v8_reg: disabling [ 3.261527] ALSA device list: [ 3.264523] #0: NVIDIA Tegra Dalmore [ 3.270431] Waiting for root device /dev/mmcblk0p1... [ 3.460198] usb 1-1: new high-speed USB device number 2 using tegra-ehci [ 4.483490] asix 1-1:1.0 eth0: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 48:f8:b3:2b:29:1f

[PYBOOT] [dalmore 01:45]: Timed out waiting for "<type 'str'>":

[PYBOOT] [dalmore 01:46]: got exception: timeout ~$off

[PYBOOT] [dalmore 01:48]: Done. Board odroidu3-arm-exynos_defconfig failure log: -------------------------------------------------

[ 1.635002] dwmmc_exynos 12550000.mmc: DW MMC controller at irq 107,32 bit host data width,128 deep fifo [ 1.642549] usb 1-3: new high-speed USB device number 2 using exynos-ehci [ 1.651475] dwmmc_exynos 12550000.mmc: allocated mmc-pwrseq [ 1.682592] dwmmc_exynos 12550000.mmc: 1 slots initialized [ 1.683791] usbcore: registered new interface driver usbhid [ 1.689011] usbhid: USB HID core driver [ 1.697787] NET: Registered protocol family 10 [ 1.698414] sit: IPv6 over IPv4 tunneling driver [ 1.701623] NET: Registered protocol family 17 [ 1.705654] NET: Registered protocol family 15 [ 1.710102] Key type dns_resolver registered [ 1.714433] Registering SWP/SWPB emulation handler [ 1.720274] s3c-rtc 10070000.rtc: rtc disabled, re-enabling [ 1.724846] s3c-rtc 10070000.rtc: rtc core: registered s3c as rtc1 [ 1.751309] mmc_host mmc1: Bus speed (slot 0) = 44000000Hz (slot req 52000000Hz, actual 44000000HZ div = 0) [ 1.753111] max98090 1-0010: MAX98090 REVID=0x43 [ 1.755330] max98090 1-0010: use default 2.8v micbias [ 1.765357] mmc_host mmc1: Bus speed (slot 0) = 73333333Hz (slot req 52000000Hz, actual 36666666HZ div = 1) [ 1.775207] mmc1: new DDR MMC card at address 0001 [ 1.777088] asoc-simple-card sound: HiFi <-> 3830000.i2s mapping ok [ 1.780164] input: gpio_keys as /devices/platform/gpio_keys/input/input0 [ 1.793022] mmcblk1: mmc1:0001 008G92 7.28 GiB [ 1.797245] mmcblk1boot0: mmc1:0001 008G92 partition 1 4.00 MiB [ 1.803075] mmcblk1boot1: mmc1:0001 008G92 partition 2 4.00 MiB [ 1.808974] mmcblk1rpmb: mmc1:0001 008G92 partition 3 512 KiB [ 1.815525] mmcblk1: p1 p2 [ 1.825422] max77686-rtc max77686-rtc: setting system clock to 2000-01-01 01:00:19 UTC (946688419) [ 1.845643] VDD10_HDMI_1.0V: disabling [ 1.846334] vdd_g3d: disabling [ 1.847407] BUCK8_2.8V: disabling [ 1.85c415] ALSA device list: [ 1.853054] #0: Odroid-U3 [ 1.856732] Waiting for root device /dev/mmcblk0p2...

[PYBOOT] [odroidu3 01:55]: Timed out waiting for "<type 'str'>":

[PYBOOT] [odroidu3 01:56]: got exception: timeout ~$off

[PYBOOT] [odroidu3 01:58]: Done. Board omap5uevm-arm-multi_lpae_defconfig failure log: -------------------------------------------------

[ 2.133647] r7 : c1301f50 r6 : ffff173c r5 : 7fffffff r4 : ffffffff [ 2.140470] r3 : 82540300 r2 : c1301eb8 r1 : c1337f80 r0 : c1337a80 [ 2.147298] Flags: Nzcv IRQs off FIQs on Mode SVC_32 ISA ARM Segment none [ 2.154856] Control: 10c5387d Table: 8020406a DAC: 00000051 [ 2.160870] Process swapper/0 (pid: 0, stack limit = 0xc1300220) [ 2.167156] Stack: (0xc1301eb8 to 0xc1302000) [ 2.171711] 1ea0: eefc9e90 00000000 [ 2.180273] 1ec0: 0000e000 c03452d8 00000000 00000000 eefcfec0 00000001 7ac946de 00000000 [ 2.188829] 1ee0: ffffffff 7fffffff c1300000 c1300000 00000000 00000000 c1301f50 fa212000 [ 2.197393] 1f00: fa213000 c140dee8 c130250c c0345640 c12054cc c030ea78 c1302880 c1340078 [ 2.205947] 1f20: fa21200c c1301f50 fa212000 c03017d4 c0308740 a0000013 ffffffff c1301f84 [ 2.214508] 1f40: c12075c0 c1302504 c140dee8 c030c494 00000001 00000000 ea000013 f0880000 [ 2.223073] 1f60: c1300000 c13024a4 00000000 00000000 c12075c0 c1302504 c140dee8 c130250c [ 2.231634] 1f80: 60000013 c1301fa0 c032af10 c0308740 a0000013 ffffffff 00000051 c030873c [ 2.240194] 1fa0: c1300000 c03781e0 c1301fb4 c1301fa8 00000000 ffffffff 00000000 c1100c4c [ 2.248751] 1fc0: ffffffff ffffffff 00000000 c1100684 00000000 c11a3a30 c14105d4 c1302480 [ 2.257314] 1fe0: c11a3a2c c1307c4c 8020406a 412fc0f2 00000000 8020807c 00000000 00000000 [ 2.265881] [<c0391a7c>] (rcu_needs_cpu) from [<c03a48cc>] (__tick_nohz_idle_enter+0x118/0x40c) [ 2.274990] [<c03a48cc>] (__tick_nohz_idle_enter) from [<c0345640>] (irq_exit+0xc8/0x114) [ 2.283558] [<c0345640>] (irq_exit) from [<c030ea78>] (handle_IPI+0x120/0x18c) [ 2.291121] [<c030ea78>] (handle_IPI) from [<c03017d4>] (gic_handle_irq+0x90/0x94) [ 2.299047] [<c03017d4>] (gic_handle_irq) from [<c030c494>] (__irq_svc+0x54/0x70) [ 2.306879] Exception stack(0xc1301f50 to 0xc1301f98) [ 2.312159] 1f40: 00000001 00000000 ea000013 f0880000 [ 2.320720] 1f60: c1300000 c13024a4 00000000 00000000 c12075c0 c1302504 c140dee8 c130250c [ 2.329280] 1f80: 60000013 c1301fa0 c032af10 c0308740 a0000013 ffffffff [ 2.336205] [<c030c494>] (__irq_svc) from [<c0308740>] (arch_cpu_idle+0x20/0x3c) [ 2.343958] [<c0308740>] (arch_cpu_idle) from [<c03781e0>] (cpu_startup_entry+0x1bc/0x218) [ 2.352613] [<c03781e0>] (cpu_startup_entry) from [<c1100c4c>] (start_kernel+0x370/0x37c) [ 2.361177] [<c1100c4c>] (start_kernel) from [<8020807c>] (0x8020807c) [ 2.368013] Code: e513310c e1a0200d ee1dcf90 e083300c (e5933020) [ 2.374390] ---[ end trace 8bcc3fd748adacc1 ]--- [ 2.379220] Kernel panic - not syncing: Attempted to kill the idle task! [ 3.363183] SMP: failed to stop secondary CPUs [ 3.367831] ---[ end Kernel panic - not syncing: Attempted to kill the idle task!

[PYBOOT] [omap5uevm 01:03]: got exception: panic ~$off

[PYBOOT] [omap5uevm 01:04]: Done. Board omap5uevm-arm-multi_v7_defconfig failure log: -------------------------------------------------

[ 1.757241] usbcore: registered new interface driver usbhid [ 1.763065] usbhid: USB HID core driver [ 1.771543] NET: Registered protocol family 10 [ 1.776483] usb 1-3: new high-speed USB device number 2 using ehci-omap [ 1.783644] sit: IPv6 over IPv4 tunneling driver [ 1.788932] NET: Registered protocol family 17 [ 1.793598] can: controller area network core (rev 20120528 abi 9) [ 1.800113] NET: Registered protocol family 29 [ 1.804771] can: raw protocol (rev 20120528) [ 1.809233] can: broadcast manager protocol (rev 20120528 t) [ 1.815163] can: netlink gateway (rev 20130117) max_hops=1 [ 1.821194] Key type dns_resolver registered [ 1.825744] omap_vc_init_channel: No PMIC info for vdd_core [ 1.831577] omap_vp_init: No PMIC info for vdd_core [ 1.836686] omap_vc_init_channel: No PMIC info for vdd_mm [ 1.842332] omap_vp_init: No PMIC info for vdd_mm [ 1.847254] omap_vc_init_channel: No PMIC info for vdd_mpu [ 1.852984] omap_vp_init: No PMIC info for vdd_mpu [ 1.858497] Power Management for TI OMAP4+ devices. [ 1.863719] ThumbEE CPU extension supported. [ 1.868214] Registering SWP/SWPB emulation handler [ 1.875298] palmas 0-0048: Irq flag is 0x00000000 [ 1.901969] palmas 0-0048: Muxing GPIO 2, PWM 0, LED 0 [ 1.912693] palmas-rtc 48070000.i2c:palmas@48:rtc: rtc core: registered 48070000.i2c:palmas as rtc0 [ 1.924008] mmc0: new high speed MMC card at address 0001 [ 1.930152] mmcblk0: mmc0:0001 SEM04G 3.69 GiB [ 1.935129] mmcblk0boot0: mmc0:0001 SEM04G partition 1 2.00 MiB [ 1.941476] mmcblk0boot1: mmc0:0001 SEM04G partition 2 2.00 MiB [ 1.974458] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 2.000064] omap_i2c 4807c000.i2c: bus 4 rev0.12 at 400 kHz [ 2.010091] smsc95xx v1.0.4 [ 2.041131] cpufreq: cpufreq_online: CPU0: Running at unlisted freq: 1100000 KHz [ 2.049034] cpufreq: cpufreq_online: CPU0: Unlisted initial frequency changed to: 1500000 KHz

[PYBOOT] [omap5uevm 02:05]: Timed out waiting for "<type 'str'>":

[PYBOOT] [omap5uevm 02:06]: got exception: timeout ~$off

[PYBOOT] [omap5uevm 02:08]: Done. Board seaboard-arm-multi_v7_defconfig failure log: -------------------------------------------------

[ 1.657097] vdd_ldo7,avdd_hdmi,vdd_fuse: supplied by vdd_sm2,vin_ldo* [ 1.667645] utmi_phy_clk_enable: timeout waiting for phy to stabilize [ 1.674120] tegra-ehci c5000000.usb: EHCI Host Controller [ 1.679542] tegra-ehci c5000000.usb: new USB bus registered, assigned bus number 3 [ 1.688008] tegra-ehci c5000000.usb: irq 287, io mem 0xc5000000 [ 1.699882] mmc2: switch to bus width 8 failed [ 1.704434] tegra-ehci c5000000.usb: USB 2.0 started, EHCI 1.00 [ 1.711070] mmc2: switch to bus width 4 failed [ 1.715578] mmc2: new high speed MMC card at address 0001 [ 1.715916] hub 3-0:1.0: USB hub found [ 1.715969] hub 3-0:1.0: 1 port detected [ 1.730810] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 1.730929] mmcblk2: mmc2:0001 MMC08G 7.46 GiB [ 1.733938] mmcblk2boot0: mmc2:0001 MMC08G partition 1 512 KiB [ 1.734330] mmcblk2boot1: mmc2:0001 MMC08G partition 2 512 KiB [ 1.739640] mmcblk2: p3 [ 1.754374] mmc0: queuing unknown CIS tuple 0x80 (50 bytes) [ 1.761734] [drm] No driver support for vblank timestamp query. [ 1.762249] mmc0: queuing unknown CIS tuple 0x80 (7 bytes) [ 1.765089] mmc0: queuing unknown CIS tuple 0x80 (7 bytes) [ 1.772383] mmc0: queuing unknown CIS tuple 0x80 (19 bytes) [ 1.791245] mmc0: queuing unknown CIS tuple 0x02 (1 bytes) [ 1.801288] mmc0: new SDIO card at address 0001 [ 1.853269] Console: switching to colour frame buffer device 170x48 [ 1.876407] drm drm: fb0: frame buffer device [ 1.893589] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 1.900498] input: gpio-keys as /devices/soc0/gpio-keys/input/input2 [ 1.907579] tps6586x-rtc tps6586x-rtc: setting system clock to 2009-01-01 00:00:00 UTC (1230768000) [ 1.921740] vdd_1v5: disabling [ 1.924828] vdd_1v2: disabling [ 2.572982] asix 2-1:1.0 eth0: register 'asix' at usb-c5008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, c0:c1:c0:13:08:60 [ 2.584430] Waiting for root device /dev/mmcblk0p3... [ 58.563683] random: nonblocking pool is initialized

[PYBOOT] [seaboard 01:56]: Timed out waiting for "<type 'str'>":

[PYBOOT] [seaboard 01:57]: got exception: timeout ~$off

[PYBOOT] [seaboard 01:59]: Done. Board seaboard-arm-tegra_defconfig failure log: -------------------------------------------------

[ 1.669307] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 1.674660] Bluetooth: BNEP socket layer initialized [ 1.679625] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 1.685579] Bluetooth: HIDP socket layer initialized [ 1.691159] Key type dns_resolver registered [ 1.696697] Registering SWP/SWPB emulation handler [ 1.712445] tegra-dc 54200000.dc: failed to probe RGB output: -517 [ 1.719171] VDDIO_HDMI: supplied by vdd_5v0 [ 1.723678] vdd_sys: supplied by vdd_5v0 [ 1.727704] vdd_sm2,vin_ldo*: supplied by vdd_sys [ 1.732727] vdd_ldo8,avdd_hdmi_pll: supplied by vdd_sm2,vin_ldo* [ 1.739288] vdd_ldo7,avdd_hdmi,vdd_fuse: supplied by vdd_sm2,vin_ldo* [ 1.749835] utmi_phy_clk_enable: timeout waiting for phy to stabilize [ 1.756368] tegra-ehci c5000000.usb: EHCI Host Controller [ 1.761860] tegra-ehci c5000000.usb: new USB bus registered, assigned bus number 3 [ 1.769926] tegra-ehci c5000000.usb: irq 287, io mem 0xc5000000 [ 1.791516] tegra-ehci c5000000.usb: USB 2.0 started, EHCI 1.00 [ 1.800509] hub 3-0:1.0: USB hub found [ 1.804426] hub 3-0:1.0: 1 port detected [ 1.817351] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 1.824015] [drm] No driver support for vblank timestamp query. [ 1.899228] Console: switching to colour frame buffer device 170x48 [ 1.923094] drm drm: fb0: frame buffer device [ 1.951525] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 1.959211] input: gpio-keys as /devices/soc0/gpio-keys/input/input4 [ 1.967136] tps6586x-rtc tps6586x-rtc: setting system clock to 2009-01-01 00:00:00 UTC (1230768000) [ 1.989758] vdd_1v5: disabling [ 1.992843] vdd_1v2: disabling [ 1.996054] ALSA device list: [ 1.999016] #0: NVIDIA Tegra Seaboard [ 2.312456] asix 2-1:1.0 eth0: register 'asix' at usb-c5008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, c0:c1:c0:13:08:60 [ 2.323718] Waiting for root device /dev/mmcblk0p3... [ 60.013403] random: nonblocking pool is initialized

[PYBOOT] [seaboard 01:46]: Timed out waiting for "<type 'str'>":

[PYBOOT] [seaboard 01:47]: got exception: timeout ~$off

[PYBOOT] [seaboard 01:49]: Done. Board snowball-arm-multi_v7_defconfig failure log: -------------------------------------------------

[ 1.912017] ledtrig-cpu: registered to indicate activity on CPUs [ 1.918487] usbcore: registered new interface driver usbhid [ 1.924072] usbhid: USB HID core driver [ 1.933502] NET: Registered protocol family 10 [ 1.939056] sit: IPv6 over IPv4 tunneling driver [ 1.944366] NET: Registered protocol family 17 [ 1.948852] can: controller area network core (rev 20120528 abi 9) [ 1.955108] NET: Registered protocol family 29 [ 1.959594] can: raw protocol (rev 20120528) [ 1.963867] can: broadcast manager protocol (rev 20120528 t) [ 1.969543] can: netlink gateway (rev 20130117) max_hops=1 [ 1.975616] Key type dns_resolver registered [ 1.980133] ThumbEE CPU extension supported. [ 1.984436] Registering SWP/SWPB emulation handler [ 1.995300] input: gpio_keys as /devices/soc0/gpio_keys/input/input0 [ 2.002136] rtc-pl031 80154000.rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800) [ 2.011383] thermal cooling_device0: thermal-cpufreq-0 bind to 0: 0-succeed [ 2.018371] thermal cooling_device0: thermal-cpufreq-0 bind to 1: 0-succeed [ 2.025390] thermal cooling_device0: thermal-cpufreq-0 bind to 2: 0-succeed [ 2.032379] db8500-cpufreq-cooling soc:cpufreq-cooling: Cooling device registered: thermal-cpufreq-0 [ 2.046234] db8500-esram12: disabling [ 2.050018] db8500-esram34: disabling [ 2.054046] V-CSI/DSI: disabling [ 2.057312] mmci-reg: disabling [ 2.061065] uart-pl011 80007000.uart: DMA channel TX dma0chan20 [ 2.067047] uart-pl011 80007000.uart: DMA channel RX dma0chan21 [ 2.073516] Waiting for root device /dev/mmcblk0p4... [ 2.110168] mmc3: new high speed MMC card at address 0001 [ 2.116149] mmcblk3: mmc3:0001 3.53 GiB [ 2.120422] mmcblk3boot0: mmc3:0001 partition 1 2.00 MiB [ 2.126068] mmcblk3boot1: mmc3:0001 partition 2 2.00 MiB [ 2.131744] mmcblk3rpmb: mmc3:0001 partition 3 128 KiB [ 2.138244] mmcblk3: p1 p2 p3 p4

[PYBOOT] [snowball 02:12]: Timed out waiting for "<type 'str'>":

[PYBOOT] [snowball 02:13]: got exception: timeout ~$off

[PYBOOT] [snowball 02:14]: Done. Board snowball-arm-u8500_defconfig failure log: -------------------------------------------------

[ 2.552093] iio iio:device1: registered pressure sensor lps001wp [ 2.558746] coresight-tpiu 80190000.tpiu: TPIU initialized [ 2.565002] coresight-etb10 801a4000.etb: ETB initialized [ 2.570922] coresight-funnel 801a6000.funnel: FUNNEL initialized [ 2.577423] coresight-replicator soc:replicator: REPLICATOR initialized [ 2.593231] ux500-msp-i2s ux500-msp-i2s.1: Failed to get DMA channel capabilities, falling back to period counting: -6 [ 2.604003] snd-soc-mop500 snd-soc-mop500.0: ab8500-codec-dai.0 <-> ux500-msp-i2s.1 mapping ok [ 2.613983] ux500-msp-i2s ux500-msp-i2s.3: Failed to get DMA channel capabilities, falling back to period counting: -6 [ 2.624725] snd-soc-mop500 snd-soc-mop500.0: ab8500-codec-dai.1 <-> ux500-msp-i2s.3 mapping ok [ 2.648162] NET: Registered protocol family 10 [ 2.664093] sit: IPv6 over IPv4 tunneling driver [ 2.670318] NET: Registered protocol family 17 [ 2.674957] NET: Registered protocol family 35 [ 2.679565] NET: Registered protocol family 37 [ 2.684417] Registering SWP/SWPB emulation handler [ 2.701049] coresight-etm3x 801ae000.ptm: PTM 1.0 initialized [ 2.707183] coresight-etm3x 801af000.ptm: PTM 1.0 initialized [ 2.714202] input: gpio_keys as /devices/soc0/gpio_keys/input/input1 [ 2.726593] ab8500-rtc ab8500-rtc.0: setting system clock to 2000-04-20 22:38:56 UTC (956270336) [ 2.735900] thermal cooling_device0: thermal-cpufreq-0 bind to 0: 0-succeed [ 2.742950] thermal cooling_device0: thermal-cpufreq-0 bind to 1: 0-succeed [ 2.749938] thermal cooling_device0: thermal-cpufreq-0 bind to 2: 0-succeed [ 2.756988] db8500-cpufreq-cooling soc:cpufreq-cooling: Cooling device registered: thermal-cpufreq-0 [ 2.770629] db8500-esram12: disabling [ 2.774383] db8500-esram34: disabling [ 2.778289] V-CSI/DSI: disabling [ 2.781585] mmci-reg: disabling [ 2.784912] ALSA device list: [ 2.787872] #0: MOP500-card [ 2.791259] uart-pl011 80007000.uart: DMA channel TX dma0chan24 [ 2.797210] uart-pl011 80007000.uart: DMA channel RX dma0chan25 [ 2.803436] Waiting for root device /dev/mmcblk0p4... [ 67.260864] random: nonblocking pool is initialized

[PYBOOT] [snowball 01:53]: Timed out waiting for "<type 'str'>":

[PYBOOT] [snowball 01:54]: got exception: timeout ~$off

[PYBOOT] [snowball 01:55]: Done.